5e4edd1f73
7086 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jin Yao
|
5e4edd1f73 |
perf parse-events: Support event inside hybrid pmu
On hybrid platform, user may want to enable events on one pmu.
Following syntax are supported:
cpu_core/<event>/
cpu_atom/<event>/
But the syntax doesn't work for cache event.
Before:
# perf stat -e cpu_core/LLC-loads/ -a -- sleep 1
event syntax error: 'cpu_core/LLC-loads/'
\___ unknown term 'LLC-loads' for pmu 'cpu_core'
Cache events are a bit complex. We can't create aliases for them.
We use another solution. For example, if we use "cpu_core/LLC-loads/",
in parse_events_add_pmu(), term->config is "LLC-loads".
Then we create a new parser to scan "LLC-loads". The
parse_events_add_cache() would be called during parsing.
The parse_state->hybrid_pmu_name is used to identify the pmu
where the event should be enabled on.
After:
# perf stat -e cpu_core/LLC-loads/ -a -- sleep 1
Performance counter stats for 'system wide':
24,593 cpu_core/LLC-loads/
1.003911601 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-13-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jin Yao
|
c93afadc92 |
perf parse-events: Compare with hybrid pmu name
On hybrid platform, user may want to enable event only on one pmu. Following syntax will be supported: cpu_core/<event>/ cpu_atom/<event>/ For hardware event, hardware cache event and raw event, two events are created by default. We pass the specified pmu name in parse_state and it would be checked before event creation. So next only the event with the specified pmu would be created. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210427070139.25256-12-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
94da591b1c |
perf parse-events: Create two hybrid raw events
On hybrid platform, same raw event is possible to be available
on both cpu_core pmu and cpu_atom pmu. It's supported to create
two raw events for one event encoding. For raw events, the
attr.type is PMU type.
# perf stat -e r3c -a -vv -- sleep 1
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 4
size 120
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
...
------------------------------------------------------------
perf_event_attr:
type 4
size 120
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 15 group_fd -1 flags 0x8 = 19
------------------------------------------------------------
perf_event_attr:
type 8
size 120
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 16 group_fd -1 flags 0x8 = 20
------------------------------------------------------------
...
------------------------------------------------------------
perf_event_attr:
type 8
size 120
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 23 group_fd -1 flags 0x8 = 27
r3c: 0: 434449 1001412521 1001412521
r3c: 1: 173162 1001482031 1001482031
r3c: 2: 231710 1001524974 1001524974
r3c: 3: 110012 1001563523 1001563523
r3c: 4: 191517 1001593221 1001593221
r3c: 5: 956458 1001628147 1001628147
r3c: 6: 416969 1001715626 1001715626
r3c: 7: 1047527 1001596650 1001596650
r3c: 8: 103877 1001633520 1001633520
r3c: 9: 70571 1001637898 1001637898
r3c: 10: 550284 1001714398 1001714398
r3c: 11: 1257274 1001738349 1001738349
r3c: 12: 107797 1001801432 1001801432
r3c: 13: 67471 1001836281 1001836281
r3c: 14: 286782 1001923161 1001923161
r3c: 15: 815509 1001952550 1001952550
r3c: 0: 95994 1002071117 1002071117
r3c: 1: 105570 1002142438 1002142438
r3c: 2: 115921 1002189147 1002189147
r3c: 3: 72747 1002238133 1002238133
r3c: 4: 103519 1002276753 1002276753
r3c: 5: 121382 1002315131 1002315131
r3c: 6: 80298 1002248050 1002248050
r3c: 7: 466790 1002278221 1002278221
r3c: 6821369 16026754282 16026754282
r3c: 1162221 8017758990 8017758990
Performance counter stats for 'system wide':
6,821,369 cpu_core/r3c/
1,162,221 cpu_atom/r3c/
1.002289965 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-11-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jin Yao
|
30def61f64 |
perf parse-events: Create two hybrid cache events
For cache events, they have pre-defined configs. The kernel needs
to know where the cache event comes from (e.g. from cpu_core pmu
or from cpu_atom pmu). But the perf type PERF_TYPE_HW_CACHE
can't carry pmu information.
Now the type PERF_TYPE_HW_CACHE is extended to be PMU aware type.
The PMU type ID is stored at attr.config[63:32].
When enabling a hybrid cache event without specified pmu, such as,
'perf stat -e LLC-loads -a', two events are created
automatically. One is for atom, the other is for core.
# perf stat -e LLC-loads -a -vv -- sleep 1
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 3
size 120
config 0x400000002
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
...
------------------------------------------------------------
perf_event_attr:
type 3
size 120
config 0x400000002
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 15 group_fd -1 flags 0x8 = 19
------------------------------------------------------------
perf_event_attr:
type 3
size 120
config 0x800000002
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 16 group_fd -1 flags 0x8 = 20
------------------------------------------------------------
...
------------------------------------------------------------
perf_event_attr:
type 3
size 120
config 0x800000002
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 23 group_fd -1 flags 0x8 = 27
LLC-loads: 0: 1507 1001800280 1001800280
LLC-loads: 1: 666 1001812250 1001812250
LLC-loads: 2: 3353 1001813453 1001813453
LLC-loads: 3: 514 1001848795 1001848795
LLC-loads: 4: 627 1001952832 1001952832
LLC-loads: 5: 4399 1001451154 1001451154
LLC-loads: 6: 1240 1001481052 1001481052
LLC-loads: 7: 478 1001520348 1001520348
LLC-loads: 8: 691 1001551236 1001551236
LLC-loads: 9: 310 1001578945 1001578945
LLC-loads: 10: 1018 1001594354 1001594354
LLC-loads: 11: 3656 1001622355 1001622355
LLC-loads: 12: 882 1001661416 1001661416
LLC-loads: 13: 506 1001693963 1001693963
LLC-loads: 14: 3547 1001721013 1001721013
LLC-loads: 15: 1399 1001734818 1001734818
LLC-loads: 0: 1314 1001793826 1001793826
LLC-loads: 1: 2857 1001752764 1001752764
LLC-loads: 2: 646 1001830694 1001830694
LLC-loads: 3: 1612 1001864861 1001864861
LLC-loads: 4: 2244 1001912381 1001912381
LLC-loads: 5: 1255 1001943889 1001943889
LLC-loads: 6: 4624 1002021109 1002021109
LLC-loads: 7: 2703 1001959302 1001959302
LLC-loads: 24793 16026838264 16026838264
LLC-loads: 17255 8015078826 8015078826
Performance counter stats for 'system wide':
24,793 cpu_core/LLC-loads/
17,255 cpu_atom/LLC-loads/
1.001970988 seconds time elapsed
0x4 in 0x400000002 indicates the cpu_core pmu.
0x8 in 0x800000002 indicates the cpu_atom pmu.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-10-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jin Yao
|
9cbfa2f64c |
perf parse-events: Create two hybrid hardware events
Current hardware events has special perf types PERF_TYPE_HARDWARE.
But it doesn't pass the PMU type in the user interface. For a hybrid
system, the perf kernel doesn't know which PMU the events belong to.
So now this type is extended to be PMU aware type. The PMU type ID
is stored at attr.config[63:32].
PMU type ID is retrieved from sysfs.
root@lkp-adl-d01:/sys/devices/cpu_atom# cat type
8
root@lkp-adl-d01:/sys/devices/cpu_core# cat type
4
When enabling a hybrid hardware event without specified pmu, such as,
'perf stat -e cycles -a', two events are created automatically. One
is for atom, the other is for core.
# perf stat -e cycles -a -vv -- sleep 1
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
size 120
config 0x400000000
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
...
------------------------------------------------------------
perf_event_attr:
size 120
config 0x400000000
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 15 group_fd -1 flags 0x8 = 19
------------------------------------------------------------
perf_event_attr:
size 120
config 0x800000000
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 16 group_fd -1 flags 0x8 = 20
------------------------------------------------------------
...
------------------------------------------------------------
perf_event_attr:
size 120
config 0x800000000
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 23 group_fd -1 flags 0x8 = 27
cycles: 0: 836272 1001525722 1001525722
cycles: 1: 628564 1001580453 1001580453
cycles: 2: 872693 1001605997 1001605997
cycles: 3: 70417 1001641369 1001641369
cycles: 4: 88593 1001726722 1001726722
cycles: 5: 470495 1001752993 1001752993
cycles: 6: 484733 1001840440 1001840440
cycles: 7:
|
||
|
Jin Yao
|
12279429d8 |
perf stat: Uniquify hybrid event name
It would be useful to let user know the pmu which the event belongs to. perf-stat has supported '--no-merge' option and it can print the pmu name after the event name, such as: "cycles [cpu_core]" Now this option is enabled by default for hybrid platform but change the format to: "cpu_core/cycles/" If user configs the name, we still use the user specified name. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> ink: https://lore.kernel.org/r/20210427070139.25256-8-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
c5a26ea490 |
perf pmu: Add hybrid helper functions
The functions perf_pmu__is_hybrid and perf_pmu__find_hybrid_pmu can be used to identify the hybrid platform and return the found hybrid cpu pmu. All the detected hybrid pmus have been saved in 'perf_pmu__hybrid_pmus' list. So we just need to search this list. perf_pmu__hybrid_type_to_pmu converts the user specified string to hybrid pmu name. This is used to support the '--cputype' option in next patches. perf_pmu__has_hybrid checks the existing of hybrid pmu. Note that, we have to define it in pmu.c (make pmu-hybrid.c no more symbol dependency), otherwise perf test python would be failed. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210427070139.25256-7-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
444624307c |
perf pmu: Save detected hybrid pmus to a global pmu list
We identify the cpu_core pmu and cpu_atom pmu by explicitly checking following files: For cpu_core, checks: "/sys/bus/event_source/devices/cpu_core/cpus" For cpu_atom, checks: "/sys/bus/event_source/devices/cpu_atom/cpus" If the 'cpus' file exists and it has data, the pmu exists. But in order not to hardcode the "cpu_core" and "cpu_atom", and make the code in a generic way. So if the path "/sys/bus/event_source/devices/cpu_xxx/cpus" exists, the hybrid pmu exists. All the detected hybrid pmus are linked to a global list 'perf_pmu__hybrid_pmus' and then next we just need to iterate the list to get all hybrid pmu by using perf_pmu__for_each_hybrid_pmu. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210427070139.25256-6-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
32705de7d4 |
perf pmu: Save pmu name
On hybrid platform, one event is available on one pmu (such as, available on cpu_core or on cpu_atom). This patch saves the pmu name to the pmu field of struct perf_pmu_alias. Then next we can know the pmu which the event can be enabled on. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210427070139.25256-5-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
eab35953e6 |
perf pmu: Simplify arguments of __perf_pmu__new_alias
Simplify the arguments of __perf_pmu__new_alias() by passing the whole 'struct pme_event' pointer. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210427070139.25256-4-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Namhyung Kim
|
2775de0b11 |
perf report: Add --skip-empty option to suppress 0 event stat
To make the output more readable, I think it's better to remove 0's in
the output. Also the dummy event has no event stats so it just wasts
the space. Let's use the --skip-empty option to suppress it.
$ perf report --stat --skip-empty
Aggregated stats:
TOTAL events: 16530
MMAP events: 226
COMM events: 1596
EXIT events: 2
THROTTLE events: 121
UNTHROTTLE events: 117
FORK events: 1595
SAMPLE events: 719
MMAP2 events: 12147
CGROUP events: 2
FINISHED_ROUND events: 2
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
cycles stats:
SAMPLE events: 719
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427013717.1651674-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
0f0abbace3 |
perf hists: Split hists_stats from events_stats
Each struct hists have events_stats but most of the fields were not used. It's to count number of samples and periods whether filtered or not. And other fields are used only by evlist. So it'd be better to split hists_stats and events_stats to reduce wasted memory in the struct hists. This makes the output of event statistics in the perf report compact by skipping 0 events in each evsel/hists. Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210427013717.1651674-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Nicholas Fraser
|
d0713d4ca3 |
perf data: Add JSON export
This adds a feature to export perf data to JSON.
The resolved symbols are exported into the JSON so that external tools
don't need to load the dsos themselves (or even have access to them at
all.) This makes it easy to load and analyze perf data with standalone
tools where direct perf or libbabeltrace integration is impractical.
The exporter uses a minimal inline JSON encoding without any external
dependencies. Currently it only outputs some headers and sample metadata
but it's easily extensible.
Use it like this:
$ perf data convert --to-json out.json
Committer notes:
Fixup a __printf() bug that broke the build:
util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant
103 | __(printf, 5, 6)
| ^~
| )
util/data-convert-json.c: In function ‘output_sample_callchain_entry’:
util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration]
124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip);
| ^~~~~~~~~~~~~~~~~~~~~~
| output_json_format
Also had to add this patch to fix errors reported by various versions of
clang:
- if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) {
+ if (al && al->sym && al->sym->namelen) {
al->sym->name is a zero sized array, to avoid one extra alloc in the
symbol__new() constructor, sym->namelen carries its strlen.
Committer testing:
$ ls -la out.json
ls: cannot access 'out.json': No such file or directory
$ perf record sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf report --stats | grep -w SAMPLE
SAMPLE events: 8
$ perf data convert --to-json out.json
[ perf data convert: Converted 'perf.data' into JSON data 'out.json' ]
[ perf data convert: Converted and wrote 0.002 MB (8 samples) ]
$ ls -la out.json
-rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json
$ cat out.json
{
"linux-perf-json-version": 1,
"headers": {
"header-version": 1,
"captured-on": "2021-04-26T20:28:57Z",
"data-offset": 432,
"data-size": 1016,
"feat-offset": 1448,
"hostname": "five",
"os-release": "5.11.14-200.fc33.x86_64",
"arch": "x86_64",
"cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor",
"cpuid": "AuthenticAMD,23,113,0",
"nrcpus-online": 24,
"nrcpus-avail": 24,
"perf-version": "5.12.gee134f3189bd",
"cmdline": [
"/home/acme/bin/perf",
"record",
"sleep",
"0.1"
]
},
"samples": [
{
"timestamp": 170517539043684,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6268827"
}
]
},
{
"timestamp": 170517539048443,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa661359d"
}
]
},
{
"timestamp": 170517539051018,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6311e18"
}
]
},
{
"timestamp": 170517539053652,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b4812b",
"symbol": "_dl_start",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539055306,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6269286"
}
]
},
{
"timestamp": 170517539057590,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa62abd8b"
}
]
},
{
"timestamp": 170517539067559,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b5e9e9",
"symbol": "__GI___tunables_init",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539282452,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb779978d2",
"symbol": "getenv",
"dso": "libc-2.32.so"
}
]
}
]
}
$
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Song Liu
|
5508c9dae2 |
perf stat: Introduce bpf_counter_ops->disable()
Introduce bpf_counter_ops->disable(), which is used stop counting the event. Committer notes: Added a dummy bpf_counter__disable() to the python binding to avoid having 'perf test python' failing. bpf_counter isn't supported in the python binding. Signed-off-by: Song Liu <song@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: kernel-team@fb.com Link: https://lore.kernel.org/r/20210425214333.1090950-6-song@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Song Liu
|
01bd8efcec |
perf stat: Introduce ':b' modifier
Introduce 'b' modifier to event parser, which means use BPF program to manage this event. This is the same as --bpf-counters option, but only applies to this event. For example, perf stat -e cycles:b,cs # use bpf for cycles, but not cs perf stat -e cycles,cs --bpf-counters # use bpf for both cycles and cs Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/r/20210425214333.1090950-5-song@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Song Liu
|
112cb56164 |
perf stat: Introduce config stat.bpf-counter-events
Currently, to use BPF to aggregate perf event counters, the user uses --bpf-counters option. Enable "use bpf by default" events with a config option, stat.bpf-counter-events. Events with name in the option will use BPF. This also enables mixed BPF event and regular event in the same sesssion. For example: perf config stat.bpf-counter-events=instructions perf stat -e instructions,cs The second command will use BPF for "instructions" but not "cs". Signed-off-by: Song Liu <song@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/r/20210425214333.1090950-4-song@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Song Liu
|
fe3dd8263b |
perf bpf: check perf_attr_map is compatible with the perf binary
perf_attr_map could be shared among different version of perf binary. Add bperf_attr_map_compatible() to check whether the existing attr_map is compatible with current perf binary. Signed-off-by: Song Liu <song@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: kernel-team@fb.com Link: https://lore.kernel.org/r/20210425214333.1090950-3-song@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Song Liu
|
ec8149fba6 |
perf util: Move bpf_perf definitions to a libperf header
By following the same protocol, other tools can share hardware PMCs with perf. Move perf_event_attr_map_entry and BPF_PERF_DEFAULT_ATTR_MAP_PATH to bpf_perf.h for other tools to use. Signed-off-by: Song Liu <song@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: kernel-team@fb.com Link: https://lore.kernel.org/r/20210425214333.1090950-2-song@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
26bda3ca19 |
Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Zhen Lei
|
c6f8714125 |
perf map: Fix error return code in maps__clone()
Although 'err' has been initialized to -ENOMEM, but it will be reassigned
by the "err = unwind__prepare_access(...)" statement in the for loop. So
that, the value of 'err' is unknown when map__clone() failed.
Fixes:
|
||
Leo Yan
|
b14585d9f1 |
perf auxtrace: Fix potential NULL pointer dereference
In the function auxtrace_parse_snapshot_options(), the callback pointer
"itr->parse_snapshot_options" can be NULL if it has not been set during
the AUX record initialization. This can cause tool crashing if the
callback pointer "itr->parse_snapshot_options" is dereferenced without
performing NULL check.
Add a NULL check for the pointer "itr->parse_snapshot_options" before
invoke the callback.
Fixes:
|
||
|
Zhen Lei
|
f2211881e7 |
perf data: Fix error return code in perf_data__create_dir()
Although 'ret' has been initialized to -1, but it will be reassigned by the "ret = open(...)" statement in the for loop. So that, the value of 'ret' is unknown when asprintf() failed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Zhen Lei
|
59a1a843b0 |
perf data: Fix error return code in perf_data__create_dir()
Although 'ret' has been initialized to -1, but it will be reassigned by the "ret = open(...)" statement in the for loop. So that, the value of 'ret' is unknown when asprintf() failed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Martin Liška
|
f89a82a82b |
perf annotate: Add line number like in TUI and source location at EOL
The patch changes the output format in 2 ways:
- line number is displayed for all source lines (matching TUI mode)
- source locations for the hottest lines are printed
at the line end in order to preserve layout
Before:
0.00 : 405ef1: inc %r15
: tmpsd * (TD + tmpsd * TDD)));
0.01 : 405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3 # 4318b0 <_IO_stdin_used+0x8b0>
: tmpsd * (TC +
eff.c:1811 0.67 : 405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3 # 4318b8 <_IO_stdin_used+0x8b8>
: TA + tmpsd * (TB +
0.35 : 405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3 # 4318c0 <_IO_stdin_used+0x8c0>
: dumbo =
eff.c:1809 1.41 : 405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3 # 4318c8 <_IO_stdin_used+0x8c8>
: sumi -= sj * tmpsd * dij2i * dumbo;
eff.c:1813 2.58 : 405f18: vmulsd %xmm3,%xmm0,%xmm0
2.81 : 405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0
3.78 : 405f23: vmovsd %xmm0,0x30(%rsp)
: for (k = 0; k < lpears[i] + upears[i]; k++) {
eff.c:1761 0.90 : 405f29: cmp %r15d,%r12d
After:
0.00 : 405ef1: inc %r15
: 1812 tmpsd * (TD + tmpsd * TDD)));
0.01 : 405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3 # 4318b0 <_IO_stdin_used+0x8b0>
: 1811 tmpsd * (TC +
0.67 : 405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3 # 4318b8 <_IO_stdin_used+0x8b8> // eff.c:1811
: 1810 TA + tmpsd * (TB +
0.35 : 405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3 # 4318c0 <_IO_stdin_used+0x8c0>
: 1809 dumbo =
1.41 : 405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3 # 4318c8 <_IO_stdin_used+0x8c8> // eff.c:1809
: 1813 sumi -= sj * tmpsd * dij2i * dumbo;
2.58 : 405f18: vmulsd %xmm3,%xmm0,%xmm0 // eff.c:1813
2.81 : 405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0
3.78 : 405f23: vmovsd %xmm0,0x30(%rsp)
: 1761 for (k = 0; k < lpears[i] + upears[i]; k++) {
Where e.g. '// eff.c:1811' shares the same color as the percentantage
at the line beginning.
Signed-off-by: Martin Liška <mliska@suse.cz>
Link: http://lore.kernel.org/lkml/a0d53f31-f633-5013-c386-a4452391b081@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Alexander Antonov
|
f07952b179 |
perf stat: Basic support for iostat in perf
Add basic flow for a new iostat mode in perf. Mode is intended to provide four I/O performance metrics per each PCIe root port: Inbound Read, Inbound Write, Outbound Read, Outbound Write. The actual code to compute the metrics and attribute it to root port is in follow-on patches. Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-2-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
9865ea8ab3 |
perf evlist: Add a method to return the list of evsels as a string
Add a 'scnprintf' method to obtain the list of evsels in a evlist as a string, excluding the "dummy" event used for things like receiving metadata events (PERF_RECORD_FORK, MMAP, etc) when synthesizing preexisting threads. Will be used to improve the error message for workload failure in 'perf record. Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20210414131628.2064862-2-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
473b2922c7 |
Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes from perf/urgent that got into upstream. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
John Garry
|
e126bef55f |
perf pmu: Add pmu_events_map__find() function to find the common PMU map for the system
Add a function to find the common PMU map for the system. For arm64, a special variant is added. This is because arm64 supports heterogeneous CPU systems. As such, it cannot be guaranteed that the cpumap is same for all CPUs. So in case of heterogeneous systems, don't return a cpumap. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Paul A. Clarke <pc@us.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1617791570-165223-4-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
John Garry
|
dedb76d359 |
perf metricgroup: Make find_metric() public with name change
Function find_metric() is required for the metric processing in the pmu-events testcase, so make it public. Also change the name to include "metricgroup". Tested-by: Paul A. Clarke <pc@us.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/1617791570-165223-2-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ian Rogers
|
92f1e8adf7 |
perf arm-spe: Avoid potential buffer overrun
SPE extended headers are > 1 byte so ensure the buffer contains at least this before reading. This issue was detected by fuzzing. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/20210407153955.317215-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
f2013278ae |
perf report: Fix wrong LBR block sorting
When '--total-cycles' is specified, it supports sorting for all blocks
by 'Sampled Cycles%'. This is useful to concentrate on the globally
hottest blocks.
'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles
But in current code, it doesn't use the cycles aggregation. Part of
'cycles' counting is possibly dropped for some overlap jumps. But for
identifying the hot block, we always need the full cycles.
# perf record -b ./triad_loop
# perf report --total-cycles --stdio
Before:
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ............................................................. .................
#
0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so
0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms]
0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms]
0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms]
0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms]
0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms]
0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms]
0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms]
0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms]
0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms]
0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so
...
0.00% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop
The hottest block '[triad_loop.c:64 -> triad_loop.c:65]' is not at
the top of output.
After:
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... .............................................................. .................
#
94.35% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop
0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so
0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms]
0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms]
0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms]
0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms]
0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms]
0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms]
0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms]
0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms]
0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms]
0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so
0.08% 82 0.06% 11 [intel_pmu_drain_pebs_nhm+580 -> intel_pmu_drain_pebs_nhm+627] [kernel.kallsyms]
0.08% 77 0.42% 77 [lru_add_drain_cpu+0 -> lru_add_drain_cpu+133] [kernel.kallsyms]
0.08% 74 0.10% 18 [handle_pmi_common+271 -> handle_pmi_common+310] [kernel.kallsyms]
0.08% 74 0.40% 74 [get-dynamic-info.h:131 -> get-dynamic-info.h:157] ld-2.27.so
0.07% 69 0.09% 17 [intel_pmu_drain_pebs_nhm+432 -> intel_pmu_drain_pebs_nhm+468] [kernel.kallsyms]
Now the hottest block is reported at the top of output.
Fixes:
|
||
Wan Jiabing
|
69baf1a2a4 |
perf mem-events: Remove unnecessary 'struct mem_info' forward declaration
'struct mem_info' is defined at 22nd line. The declaration here is unnecessary. Remove it. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kael_w@yeah.net Link: http://lore.kernel.org/lkml/20210406105104.675879-1-wanjiabing@vivo.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wan Jiabing
|
fd6103cb67 |
perf evsel: Remove duplicate 'struct target' forward declaration
'struct target' is declared twice. One has been declared at 21st line. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kael_w@yeah.net Link: http://lore.kernel.org/lkml/20210401062424.991737-1-wanjiabing@vivo.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Fabian Hemmer
|
292c5ed168 |
perf tools: Preserve identifier id in OCaml demangler
Some OCaml developers reported that this bit of information is sometimes useful for disambiguating functions for which the OCaml compiler assigns the same name, e.g. nested or inlined functions. Signed-off-by: Fabian Hemmer <copy@copy.sh> Link: http://lore.kernel.org/lkml/20210226075223.p3s5oz4jbxwnqjtv@nyu Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
b0a752d43b |
Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes sent via perf/urgent and in the BPF tools/ directories. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Athira Rajeev
|
50fa3a531e |
perf sort: Display sort dimension p_stage_cyc only on supported archs
The sort dimension "p_stage_cyc" is used to represent pipeline stage cycle information. Presently, this is used only in powerpc. For unsupported platforms, we don't want to display it in the perf report output columns. Hence add check in sort_dimension__add() and skip the sort key incase it is not applicable for the particular arch. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-6-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Athira Rajeev
|
06e5ca746c |
perf tools: Support pipeline stage cycles for powerpc
The pipeline stage cycles details can be recorded on powerpc from the contents of Performance Monitor Unit (PMU) registers. On ISA v3.1 platform, sampling registers exposes the cycles spent in different pipeline stages. Patch adds perf tools support to present two of the cycle counter information along with memory latency (weight). Re-use the field 'ins_lat' for storing the first pipeline stage cycle. This is stored in 'var2_w' field of 'perf_sample_weight'. Add a new field 'p_stage_cyc' to store the second pipeline stage cycle which is stored in 'var3_w' field of perf_sample_weight. Add new sort function 'Pipeline Stage Cycle' and include this in default_mem_sort_order[]. This new sort function may be used to denote some other pipeline stage in another architecture. So add this to list of sort entries that can have dynamic header string. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-5-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Athira Rajeev
|
0a606822c4 |
perf sort: Add dynamic headers for perf report columns
Currently the header string for different columns in perf report is fixed. Some fields of perf sample could have different meaning for different architectures than the meaning conveyed by the header string. An example is the new field 'var2_w' of perf_sample_weight structure. This is presently captured as 'Local INSTR Latency' in perf mem report. But this could be used to denote a different latency cycle in another architecture. Introduce a weak function arch_perf_header_entry() to set the arch specific header string for the fields which can contain dynamic header. If the architecture do not have this function, fall back to the default header string value. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-3-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wan Jiabing
|
405e07010d |
perf tools: Remove duplicate struct forward declarations
'struct evlist' has been declared at 10th line. 'struct comm' has been declared at 15th line. Remove the duplicates Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kael_w@yeah.net Link: http://lore.kernel.org/lkml/20210325043947.846093-1-wanjiabing@vivo.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
41d5854113 |
perf record: Fix memory leak in vDSO found using ASAN
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
#11 0x559bce519bea in perf_session__process_events util/session.c:2297
#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
#9 0x559bce519bea in perf_session__process_events util/session.c:2297
#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jin Yao
|
0bdad97801 |
perf stat: Align CSV output for summary mode
The 'perf stat' subcommand supports the request for a summary of the
interval counter readings. But the summary lines break the CSV output
so it's hard for scripts to parse the result.
Before:
# perf stat -x, -I1000 --interval-count 1 --summary
1.001323097,8013.48,msec,cpu-clock,8013483384,100.00,8.013,CPUs utilized
1.001323097,270,,context-switches,8013513297,100.00,0.034,K/sec
1.001323097,13,,cpu-migrations,8013530032,100.00,0.002,K/sec
1.001323097,184,,page-faults,8013546992,100.00,0.023,K/sec
1.001323097,20574191,,cycles,8013551506,100.00,0.003,GHz
1.001323097,10562267,,instructions,8013564958,100.00,0.51,insn per cycle
1.001323097,2019244,,branches,8013575673,100.00,0.252,M/sec
1.001323097,106152,,branch-misses,8013585776,100.00,5.26,of all branches
8013.48,msec,cpu-clock,8013483384,100.00,7.984,CPUs utilized
270,,context-switches,8013513297,100.00,0.034,K/sec
13,,cpu-migrations,8013530032,100.00,0.002,K/sec
184,,page-faults,8013546992,100.00,0.023,K/sec
20574191,,cycles,8013551506,100.00,0.003,GHz
10562267,,instructions,8013564958,100.00,0.51,insn per cycle
2019244,,branches,8013575673,100.00,0.252,M/sec
106152,,branch-misses,8013585776,100.00,5.26,of all branches
The summary line loses the timestamp column, which breaks the CSV
output.
We add a column at the original 'timestamp' position and it just says
'summary' for the summary line.
After:
# perf stat -x, -I1000 --interval-count 1 --summary
1.001196053,8012.72,msec,cpu-clock,8012722903,100.00,8.013,CPUs utilized
1.001196053,218,,context-switches,8012753271,100.00,0.027,K/sec
1.001196053,9,,cpu-migrations,8012769767,100.00,0.001,K/sec
1.001196053,0,,page-faults,8012786257,100.00,0.000,K/sec
1.001196053,15004518,,cycles,8012790637,100.00,0.002,GHz
1.001196053,7954691,,instructions,8012804027,100.00,0.53,insn per cycle
1.001196053,1590259,,branches,8012814766,100.00,0.198,M/sec
1.001196053,82601,,branch-misses,8012824365,100.00,5.19,of all branches
summary,8012.72,msec,cpu-clock,8012722903,100.00,7.986,CPUs utilized
summary,218,,context-switches,8012753271,100.00,0.027,K/sec
summary,9,,cpu-migrations,8012769767,100.00,0.001,K/sec
summary,0,,page-faults,8012786257,100.00,0.000,K/sec
summary,15004518,,cycles,8012790637,100.00,0.002,GHz
summary,7954691,,instructions,8012804027,100.00,0.53,insn per cycle
summary,1590259,,branches,8012814766,100.00,0.198,M/sec
summary,82601,,branch-misses,8012824365,100.00,5.19,of all branches
Now it's easy for script to analyse the summary lines.
Of course, we also consider not to break possible existing scripts which
can continue to use the broken CSV format by using a new '--no-csv-summary.'
option.
# perf stat -x, -I1000 --interval-count 1 --summary --no-csv-summary
1.001213261,8012.67,msec,cpu-clock,8012672327,100.00,8.013,CPUs utilized
1.001213261,197,,context-switches,8012703742,100.00,24.586,/sec
1.001213261,9,,cpu-migrations,8012720902,100.00,1.123,/sec
1.001213261,644,,page-faults,8012738266,100.00,80.373,/sec
1.001213261,18350698,,cycles,8012744109,100.00,0.002,GHz
1.001213261,12745021,,instructions,8012759001,100.00,0.69,insn per cycle
1.001213261,2458033,,branches,8012770864,100.00,306.768,K/sec
1.001213261,102107,,branch-misses,8012781751,100.00,4.15,of all branches
8012.67,msec,cpu-clock,8012672327,100.00,7.985,CPUs utilized
197,,context-switches,8012703742,100.00,24.586,/sec
9,,cpu-migrations,8012720902,100.00,1.123,/sec
644,,page-faults,8012738266,100.00,80.373,/sec
18350698,,cycles,8012744109,100.00,0.002,GHz
12745021,,instructions,8012759001,100.00,0.69,insn per cycle
2458033,,branches,8012770864,100.00,306.768,K/sec
102107,,branch-misses,8012781751,100.00,4.15,of all branches
This option can be enabled in perf config by setting the variable
'stat.no-csv-summary'.
# perf config stat.no-csv-summary=true
# perf config -l
stat.no-csv-summary=true
# perf stat -x, -I1000 --interval-count 1 --summary
1.001330198,8013.28,msec,cpu-clock,8013279201,100.00,8.013,CPUs utilized
1.001330198,205,,context-switches,8013308394,100.00,25.583,/sec
1.001330198,10,,cpu-migrations,8013324681,100.00,1.248,/sec
1.001330198,0,,page-faults,8013340926,100.00,0.000,/sec
1.001330198,8027742,,cycles,8013344503,100.00,0.001,GHz
1.001330198,2871717,,instructions,8013356501,100.00,0.36,insn per cycle
1.001330198,553564,,branches,8013366204,100.00,69.081,K/sec
1.001330198,54021,,branch-misses,8013375952,100.00,9.76,of all branches
8013.28,msec,cpu-clock,8013279201,100.00,7.985,CPUs utilized
205,,context-switches,8013308394,100.00,25.583,/sec
10,,cpu-migrations,8013324681,100.00,1.248,/sec
0,,page-faults,8013340926,100.00,0.000,/sec
8027742,,cycles,8013344503,100.00,0.001,GHz
2871717,,instructions,8013356501,100.00,0.36,insn per cycle
553564,,branches,8013366204,100.00,69.081,K/sec
54021,,branch-misses,8013375952,100.00,9.76,of all branches
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210319070156.20394-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Song Liu
|
7fac83aaf2 |
perf stat: Introduce 'bperf' to share hardware PMCs with BPF
The perf tool uses performance monitoring counters (PMCs) to monitor system performance. The PMCs are limited hardware resources. For example, Intel CPUs have 3x fixed PMCs and 4x programmable PMCs per cpu. Modern data center systems use these PMCs in many different ways: system level monitoring, (maybe nested) container level monitoring, per process monitoring, profiling (in sample mode), etc. In some cases, there are more active perf_events than available hardware PMCs. To allow all perf_events to have a chance to run, it is necessary to do expensive time multiplexing of events. On the other hand, many monitoring tools count the common metrics (cycles, instructions). It is a waste to have multiple tools create multiple perf_events of "cycles" and occupy multiple PMCs. bperf tries to reduce such wastes by allowing multiple perf_events of "cycles" or "instructions" (at different scopes) to share PMUs. Instead of having each perf-stat session to read its own perf_events, bperf uses BPF programs to read the perf_events and aggregate readings to BPF maps. Then, the perf-stat session(s) reads the values from these BPF maps. Please refer to the comment before the definition of bperf_ops for the description of bperf architecture. bperf is off by default. To enable it, pass --bpf-counters option to perf-stat. bperf uses a BPF hashmap to share information about BPF programs and maps used by bperf. This map is pinned to bpffs. The default path is /sys/fs/bpf/perf_attr_map. The user could change the path with option --bpf-attr-map. Committer testing: # dmesg|grep "Performance Events" -A5 [ 0.225277] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.225280] ... version: 0 [ 0.225280] ... bit width: 48 [ 0.225281] ... generic registers: 6 [ 0.225281] ... value mask: 0000ffffffffffff [ 0.225281] ... max period: 00007fffffffffff # # for a in $(seq 6) ; do perf stat -a -e cycles,instructions sleep 100000 & done [1] 2436231 [2] 2436232 [3] 2436233 [4] 2436234 [5] 2436235 [6] |
||
Ingo Molnar
|
4d39c89f0b |
perf tools: Fix various typos in comments
Fix ~124 single-word typos and a few spelling errors in the perf tooling code, accumulated over the years. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210321113734.GA248990@gmail.com Link: http://lore.kernel.org/lkml/20210323160915.GA61903@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jackie Liu
|
1a096ae46e |
perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict
After installing the libelf-dev package and compiling perf, if we have kptr_restrict=2 and perf_event_paranoid=3 'perf top' will crash because the value of /proc/kallsyms cannot be obtained, which leads to info->jited_ksyms == NULL. In order to solve this problem, Add a check before use. Also plug some leaks on the error path. Suggested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: jackie liu <liuyun01@kylinos.cn> Link: http://lore.kernel.org/lkml/20210316012453.1156-1-liuyun01@kylinos.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Changbin Du
|
6859bc0e78 |
perf stat: Improve readability of shadow stats
This adds function convert_unit_double() and selects appropriate
unit for shadow stats between K/M/G.
$ sudo perf stat -a -- sleep 1
Before: Unit 'M' is selected even the number is very small.
Performance counter stats for 'system wide':
4,003.06 msec cpu-clock # 3.998 CPUs utilized
16,179 context-switches # 0.004 M/sec
161 cpu-migrations # 0.040 K/sec
4,699 page-faults # 0.001 M/sec
6,135,801,925 cycles # 1.533 GHz (83.21%)
5,783,308,491 stalled-cycles-frontend # 94.26% frontend cycles idle (83.21%)
4,543,694,050 stalled-cycles-backend # 74.05% backend cycles idle (66.49%)
4,720,130,587 instructions # 0.77 insn per cycle
# 1.23 stalled cycles per insn (83.28%)
753,848,078 branches # 188.318 M/sec (83.61%)
37,457,747 branch-misses # 4.97% of all branches (83.48%)
1.001283725 seconds time elapsed
After:
$ sudo perf stat -a -- sleep 2
Performance counter stats for 'system wide':
8,005.52 msec cpu-clock # 3.999 CPUs utilized
10,715 context-switches # 1.338 K/sec
785 cpu-migrations # 98.057 /sec
102 page-faults # 12.741 /sec
1,948,202,279 cycles # 0.243 GHz
2,816,470,932 stalled-cycles-frontend # 144.57% frontend cycles idle
2,661,172,207 stalled-cycles-backend # 136.60% backend cycles idle
464,172,105 instructions # 0.24 insn per cycle
# 6.07 stalled cycles per insn
91,567,662 branches # 11.438 M/sec
7,756,054 branch-misses # 8.47% of all branches
2.002040043 seconds time elapsed
v2:
o do not change 'sec' to 'cpu-sec'.
o use convert_unit_double to implement convert_unit.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315143047.3867-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
a7672d1df5 |
perf evlist: Change the COMM when preparing the workload
It was reported that --exclude-perf wasn't working, as tracepoints were
appearing in 'perf script' output as having the 'perf' COMM, that is
just the window in evlist__prepare_workload() after the fork() and
before the execvp() call for workloads specified in the command line.
Example:
# perf record -e kmem:kmalloc --filter 'bytes_alloc<650 && bytes_alloc>620' --exclude-perf -e kmem:kfree --exclude-perf -aR sleep 30
Then:
# perf script
perf 15905 [009] 1498.356094: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
perf 15905 [009] 1498.356116: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil)
perf 15905 [009] 1498.356116: kmem:kfree: call_site=do_execveat_common+0x19d ptr=0xffff9cf750421c00
perf 15905 [009] 1498.356138: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
perf 15905 [009] 1498.356148: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil)
perf 15905 [009] 1498.356148: kmem:kfree: call_site=do_execveat_common+0x19d ptr=0xffff9cf750421c00
perf 15905 [009] 1498.356168: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
perf 15905 [009] 1498.356176: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil)
<SNIP>
perf 15905 [009] 1498.356348: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
perf 15905 [014] 1498.356386: kmem:kfree: call_site=security_compute_sid.part.0+0x3b2 ptr=(nil)
perf 15905 [014] 1498.356423: kmem:kfree: call_site=load_elf_binary+0x207 ptr=0xffff9cf5b2a34220
perf 15905 [014] 1498.356694: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf6d0b3b000
sleep 15905 [014] 1498.356739: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
Use prctl() to show that that is just the preparation of the workload:
# perf script
perf-exec 19036 [009] 2199.357582: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
perf-exec 19036 [009] 2199.357604: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil)
perf-exec 19036 [009] 2199.357604: kmem:kfree: call_site=do_execveat_common+0x19d ptr=0xffff9cf786459800
perf-exec 19036 [009] 2199.357630: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
<SNIP>
perf-exec 19036 [000] 2199.358277: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf786fb9c00
perf-exec 19036 [000] 2199.358278: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf786458200
perf-exec 19036 [000] 2199.358279: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf786458600
sleep 19036 [000] 2199.358316: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
sleep 19036 [000] 2199.358323: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil)
sleep 19036 [000] 2199.358330: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000
sleep 19036 [000] 2199.358337: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000
sleep 19036 [000] 2199.358339: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000
sleep 19036 [000] 2199.358341: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000
Reporter: zhanweiw <wingfancy@hotmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212213
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jin Yao
|
e40647762f |
perf pmu: Validate raw event with sysfs exported format bits
A raw PMU event (eventsel+umask) in the form of rNNN is supported
by perf but lacks of checking for the validity of raw encoding.
For example, bit 16 and bit 17 are not valid on KBL but perf doesn't
report warning when encoding with these bits.
Before:
# ./perf stat -e cpu/r031234/ -a -- sleep 1
Performance counter stats for 'system wide':
0 cpu/r031234/
1.003798924 seconds time elapsed
It may silently measure the wrong event!
The kernel supported bits have been exported through
/sys/devices/<pmu>/format/. Perf collects the information to
'struct perf_pmu_format' and links it to 'pmu->format' list.
The 'struct perf_pmu_format' has a bitmap which records the
valid bits for this format. For example,
root@kbl-ppc:/sys/devices/cpu/format# cat umask
config:8-15
The valid bits (bit8-bit15) are recorded in bitmap of format 'umask'.
We collect total valid bits of all formats, save to a local variable
'masks' and reverse it. Now '~masks' represents total invalid bits.
bits = config & ~masks;
The set bits in 'bits' indicate the invalid bits used in config.
Finally we use bitmap_scnprintf to report the invalid bits.
Some architectures may not export supported bits through sysfs,
so if masks is 0, perf_pmu__warn_invalid_config directly returns.
After:
Single event without name:
# ./perf stat -e cpu/r031234/ -a -- sleep 1
WARNING: event 'N/A' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 cpu/r031234/
1.001597373 seconds time elapsed
Multiple events with names:
# ./perf stat -e cpu/rf01234,name=aaa/,cpu/r031234,name=bbb/ -a -- sleep 1
WARNING: event 'aaa' not valid (bits 20,22 of config 'f01234' not supported by kernel)!
WARNING: event 'bbb' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 aaa
0 bbb
1.001573787 seconds time elapsed
Warnings are reported for invalid bits.
Co-developed-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210310051138.12154-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
2a76f6de07 |
perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records
Account for alignment bytes in the zero-ing memset.
Fixes:
|
||
Thomas Richter
|
c3d59cfde9 |
perf synthetic-events: Fix uninitialized 'kernel_thread' variable
perf build fails on 5.12.0rc2 on s390 with this error message:
util/synthetic-events.c: In function
‘__event__synthesize_thread.part.0.isra’:
util/synthetic-events.c:787:19: error: ‘kernel_thread’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
787 | if (_pid == pid && !kernel_thread) {
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
The build succeeds using command 'make DEBUG=y'.
The variable kernel_thread is set by this function sequence:
__event__synthesize_thread()
| defines bool kernel_thread; as local variable and calls
+--> perf_event__prepare_comm(..., &kernel_thread)
+--> perf_event__get_comm_ids(..., bool *kernel);
On return of this function variable kernel is always
set to true or false.
To prevent this compile error, assign variable kernel_thread
a value when it is defined.
Output after:
[root@m35lp76 perf]# make util/synthetic-events.o
....
CC util/synthetic-events.o
[root@m35lp76 perf]#
Fixes:
|
||
Adrian Hunter
|
b410ed2a85 |
perf auxtrace: Fix auxtrace queue conflict
The only requirement of an auxtrace queue is that the buffers are in
time order. That is achieved by making separate queues for separate
perf buffer or AUX area buffer mmaps.
That generally means a separate queue per cpu for per-cpu contexts, and
a separate queue per thread for per-task contexts.
When buffers are added to a queue, perf checks that the buffer cpu and
thread id (tid) match the queue cpu and thread id.
However, generally, that need not be true, and perf will queue buffers
correctly anyway, so the check is not needed.
In addition, the check gets erroneously hit when using sample mode to
trace multiple threads.
Consequently, fix that case by removing the check.
Fixes:
|