IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
gpiochip_add_data being called before might cause premature calls of
the gpiochip operations before the port_config values are initialized,
which would possibily write zeros to port configuration registers,
an operation not allowed. For example, if there are gpio-hog nodes
in a device-tree, the sequence of function calls are performed
gpiochip_add_data
of_gpiochip_add
of_gpiochip_scan_gpios
of_gpiochip_add_hog
gpiod_hog
gpiochip_request_own_desc
gpiod_configure_flags
gpiod_direction_output/gpiod_direction_input
which would call later the gpiochip operation direction_output or
direction_input prior the port_config[] initialization.
Moreover, gpiochip_get_data is replaced by the container_of macro
inside the gpiochip operations, which would allow the calling of
max7301_direction_input prior to gpiochip_add_data
Signed-off-by: Rodrigo Alencar <455.rodrigo.alencar@gmail.com>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The interrupt simulator API exposes a lot of custom data structures and
functions and doesn't reuse the interfaces already exposed by the irq
subsystem. This patch tries to address it.
We hide all the simulator-related data structures from users and instead
rely on the well-known irq domain. When creating the interrupt simulator
the user receives a pointer to a newly created irq_domain and can use it
to create mappings for simulated interrupts.
It is also possible to pass a handle to fwnode when creating the simulator
domain and retrieve it using irq_find_matching_fwnode().
The irq_sim_fire() function is dropped as well. Instead we implement the
irq_get/set_irqchip_state interface.
We modify the two modules that use the simulator at the same time as
adding these changes in order to reduce the intermediate bloat that would
result when trying to migrate the drivers in separate patches.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Link: https://lore.kernel.org/r/20200514083901.23445-3-brgl@bgdev.pl
GPIO controllers are exported to userspace using /dev/gpiochip*
character devices. Access control to these devices is provided by
standard UNIX file system permissions, on an all-or-nothing basis:
either a GPIO controller is accessible for a user, or it is not.
Currently no mechanism exists to control access to individual GPIOs.
Hence add a GPIO driver to aggregate existing GPIOs, and expose them as
a new gpiochip.
This supports the following use cases:
- Aggregating GPIOs using Sysfs
This is useful for implementing access control, and assigning a set
of GPIOs to a specific user or virtual machine.
- Generic GPIO Driver
This is useful for industrial control, where it can provide
userspace access to a simple GPIO-operated device described in DT,
cfr. e.g. spidev for SPI-operated devices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20200511145257.22970-5-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently a GPIO lookup table can only refer to a specific GPIO by a
tuple, consisting of a GPIO controller label and a GPIO offset inside
the controller.
However, a GPIO may also carry a line name, defined by DT or ACPI.
If present, the line name is the most use-centric way to refer to a
GPIO. Hence add support for looking up GPIOs by line name.
Note that there is no guarantee that GPIO line names are globally
unique, so this will use the first match found.
Implement this by reusing the existing gpiod_lookup infrastructure.
Rename gpiod_lookup.chip_label to gpiod_lookup.key, to make it clear
that this field can have two meanings, and update the kerneldoc and
GPIO_LOOKUP*() macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20200511145257.22970-4-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- fix probing for chips without PWM in gpio-mvebu
- fix ida_simple_get() error path in gpio-exar
- fix user-space notifications for line state changes
-----BEGIN PGP SIGNATURE-----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=mll0
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
gpio fixes for v5.7-rc6
- fix probing for chips without PWM in gpio-mvebu
- fix ida_simple_get() error path in gpio-exar
- fix user-space notifications for line state changes
There is no need to have an additional check to call
acpi_gpiochip_request_interrupts(). Even without any interrupts available
the registered ACPI Event handlers can be useful for debugging purposes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200512182721.55127-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is nothing in the driver requires OF_GPIO. Moreover, driver
supports ACPI and OF_GPIO may be a quite overhead on such configurations.
Drop dependency for good and replace of_gpio.h to of.h since we have
one function to be defined from there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200512182721.55127-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
acpi_gpiochip_request_interrupts() will check for ACPI handle of
the GPIO chip parent device and bail out if there is none defined.
Thus, has_acpi_companion() is effectively repeating above and
is not needed in the individual driver.
Assigning ->to_irq() unconditionally doesn't change anything, except
an error code, but this we fix as well by propagating it from
platform_get_irq().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200512182623.54990-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simplify the code which fetches the input clock by using
devm_clk_get_optional(). If no input clock is present
devm_clk_get_optional() will return NULL instead of an error
which matches the behavior of the old code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200512182623.54990-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_set_desc_names() no longer rejects GPIO line name collisions.
Hence GPIO line names are not guaranteed to be globally unique.
In case of multiple GPIO lines with the same name, gpio_name_to_desc()
will return the first match found.
Update the comments for gpio_name_to_desc() and
gpiochip_set_desc_names() to match reality.
Fixes: f881bab038c9667d ("gpio: keep the GPIO line names internal")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200511101828.30046-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently we emit the REQUESTED line state event after the line is
requested but before the flags are configured. This is obviously wrong
as we want to pass the updated lineinfo to user-space together with the
event.
Since the flags can be configured in different ways depending on how the
line is being requested - we need to call the notifier chain in different
places separately.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
* MSI support for Intel Merrifield
* Refactor gpio-pch to be up-to-date with recent kernel APIs
* Miscellaneous cleanups here and there
The following is an automated git shortlog grouped by driver:
ich:
- fix a typo
merrifield:
- Better show how GPIO and IRQ bases are derived from hardware
- Switch over to MSI interrupts
pch:
- Use in pch_irq_type() macros provided by IRQ core
- Refactor pch_irq_type() to avoid unnecessary locking
- Get rid of unneeded variable in IRQ handler
- Use BIT() and GENMASK() where it's appropriate
-----BEGIN PGP SIGNATURE-----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=P708
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel
intel-gpio for v5.8-1
* MSI support for Intel Merrifield
* Refactor gpio-pch to be up-to-date with recent kernel APIs
* Miscellaneous cleanups here and there
The following is an automated git shortlog grouped by driver:
ich:
- fix a typo
merrifield:
- Better show how GPIO and IRQ bases are derived from hardware
- Switch over to MSI interrupts
pch:
- Use in pch_irq_type() macros provided by IRQ core
- Refactor pch_irq_type() to avoid unnecessary locking
- Get rid of unneeded variable in IRQ handler
- Use BIT() and GENMASK() where it's appropriate
- correct the IRQ type used in to_irq() in gpio-xgene-sb
- add new item to the TODO list
- support building gpio-pl061 as module
- improve pull-up/down support on GPIO expanders in device-tree
- several improvements in gpio-pca953x
- emit a warning for too long GPIO line names
- add MODULE_DEVICE_TABLE to gpio-tegra186
- add support for new variant to gpio-f7188x
- lsgpio can now display bias flags
-----BEGIN PGP SIGNATURE-----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=1vvZ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.8-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.8-rc1 - part1
- correct the IRQ type used in to_irq() in gpio-xgene-sb
- add new item to the TODO list
- support building gpio-pl061 as module
- improve pull-up/down support on GPIO expanders in device-tree
- several improvements in gpio-pca953x
- emit a warning for too long GPIO line names
- add MODULE_DEVICE_TABLE to gpio-tegra186
- add support for new variant to gpio-f7188x
- lsgpio can now display bias flags
The commit 7ecced0934e5 ("gpio: exar: add a check for the return value
of ida_simple_get fails") added a goto jump to the common error
handler for ida_simple_get() error, but this is wrong in two ways:
it doesn't set the proper return code and, more badly, it invokes
ida_simple_remove() with a negative index that shall lead to a kernel
panic via BUG_ON().
This patch addresses those two issues.
Fixes: 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Export MODULE_DEVICE_TABLE since the driver can be built as a module.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
After the previous patch the two last parameters of
pca953x_recalc_addr() are unused and so can be dropped.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Some of the chips supported by the pca953x driver need the most
significant bit in the address word set to automatically increment the
address pointer on subsequent reads and writes (example: PCA9505). With
this bit unset the same register is read multiple times on a multi-byte
read sequence. Other chips must not have this bit set and autoincrement
always (example: PCA9555).
Up to now this AI bit was interpreted to be part of the address, which
resulted in inconsistent regmap caching when a register was written with
AI set and then read without it. This happened for the PCA9505 in
pca953x_gpio_set_multiple() where pca953x_read_regs() bulk read from the
cache for registers 0x8-0xc and then wrote to registers 0x88-0x8c. (Side
note: reading 5 values from offset 0x8 yiels OP0 5 times because AI must
be set to get OP0-OP4, which is another bug that is resolved here as a
by-product.) The same problem happens when calls to gpio_set_value() and
gpio_set_array_value() were mixed.
With this patch the AI bit is always set for chips that support it. This
works as there are no code locations that make use of the behaviour with
AI unset (for the chips that support it).
Note that the call to pca953x_setup_gpio() had to be done a bit earlier
to make the NBANK macro work.
The history of this bug is a bit complicated. Commit b32cecb46bdc
("gpio: pca953x: Extract the register address mangling to single
function") changed which chips and functions are affected. Commit
3b00691cc46a ("gpio: pca953x: hack to fix 24 bit gpio expanders") used
some duct tape to make the driver at least appear to work. Commit
49427232764d ("gpio: pca953x: Perform basic regmap conversion")
introduced the caching. Commit b4818afeacbd ("gpio: pca953x: Add
set_multiple to allow multiple bits to be set in one write.") introduced
the .set_multiple() callback which didn't work for chips that need the
AI bit which was fixed later for some chips in 8958262af3fb ("gpio:
pca953x: Repair multi-byte IO address increment on PCA9575"). So I'm
sorry, I don't know which commit I should pick for a Fixes: line.
Tested-by: Marcel Gudert <m.gudert@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The commit 96d7c7b3e654 ("gpio: gpio-pca953x, Add get_multiple function")
basically did everything wrong from style and code reuse perspective, i.e.
- it didn't utilize existing PCA953x internal helpers
- it didn't utilize bitmap API
- it misses the point that ilog2(), besides that BANK_SFT is useless,
can be used in macros
- it has indentation issues.
Rewrite the function completely.
Cc: Paul Thomas <pthomas8589@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ
client has released the GPIO IRQ. This allows the HW to raise IRQs, and
SW to process them, after shutdown. Fix this by masking the IRQ when it's
shut down. This is usually taken care of by the irqchip core, but since
this driver has a custom irq_shutdown implementation, it must do this
explicitly itself.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Link: https://lore.kernel.org/r/20200427232605.11608-1-swarren@wwwdotorg.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200427110829.154785-1-weiyongjun1@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The symbol 'gpio_of_notifier' doesn't exist without both CONFIG_OF_GPIO
and CONFIG_OF_DYNAMIC enabled, but is referenced when only
CONFIG_OF_DYNAMIC is enabled.
This broke building with 'make ARCH=um allyesconfig':
---------------
/usr/bin/ld: drivers/gpio/gpiolib.o: in function `gpiolib_dev_init':
./drivers/gpio/gpiolib.c:5293: undefined reference to `gpio_of_notifier'
collect2: error: ld returned 1 exit status
---------------
Fixes: 63636d956c45 ("gpio: of: Add DT overlay support for GPIO hogs")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200425044655.166257-1-davidgow@google.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simplify the printing of kernel messages and make the messages more
accurate by using the most appropriate {dev,chip,gpiod}_*() helpers.
Sample impact:
-gpiochip_setup_dev: registered GPIOs 496 to 511 on device: gpiochip0 (e6050000.gpio)
+gpio gpiochip0: registered GPIOs 496 to 511 on e6050000.gpio
-no flags found for gpios
+gpio-953 (?): no flags found for gpios
-GPIO line 355 (PCIE/SATA switch) hogged as output/low
+gpio-355 (PCIE/SATA switch): hogged as output/low
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200424141432.11400-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In some cases indentation makes code harder to read. Amend indentation
in those cases despite of lines go a bit over 80 character limit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Cc: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200422110654.23442-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When we mask interrupts before sleep, there is no need to have a conjunction
with 0xffffffff since the accepted by dwapb_write() value is 32-bit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Cc: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200422110654.23442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some DT authors (including myself) have messed up the length of
gpio-line-names and made it longer than it should be. Add a warning here
so that developers can figure out that they've messed up their DT and
should fix it.
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The PWM iomem resource is optional and its presence indicates whether
the GPIO chip has a PWM or not, which is why mvebu_pwm_probe() returned
successfully when the PWM resource was not present. With f51b18d92b66
the driver switched to devm_platform_ioremap_resource_byname() and
its error return is propagated to the caller, so now a missing PWM resource
leads to a probe error in the driver.
To fix this explicitly test for the presence of the PWM resource and
return successfully when it's not there. Do this check before the check
for the clock is done (which GPIO chips without a PWM do not have). Also
move the existing comment why the PWM resource is optional up to the
actual check.
Fixes: f51b18d92b66 ("gpio: mvebu: use devm_platform_ioremap_resource_byname()")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We must not call pinctrl_gpio_can_use_line() with the gpio_lock taken
as it takes a mutex internally. Let's move the call before taking the
spinlock and store the return value.
This isn't perfect - there's a moment between calling
pinctrl_gpio_can_use_line() and taking the spinlock where the situation
can change but it isn't a regression either: previously this part wasn't
protected at all and it only affects the information user-space is
seeing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: d2ac25798208 ("gpiolib: provide a dedicated function for setting lineinfo")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
This makes the new ioctl() a bit more robust - we now check if a line
is already being watched and return -EBUSY if the user-space tries to
start watching it again. Same for unwatch - return -EBUSY if user-space
tries to unwatch a line that's not being watched.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
pca953x_gpio_set_config is setup to support pull-up/down
bias. Currently the driver uses a variable called 'config' to
determine which options to use. Unfortunately, this is incorrect.
This patch uses function pinconf_to_config_param(config), which
converts this 'config' parameter back to pinconfig to determine
which option to use.
Fixes: 15add06841a3 ("gpio: pca953x: add ->set_config implementation")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Since we always have a table of IDs compiled in, there is no use
for of_match_ptr() nor ACPI_PTR() call. Besides that it brings
a warning (depending on configuration):
.../gpio-dwapb.c:638:34: warning: ‘dwapb_of_match’ defined but not used [-Wunused-const-variable=]
638 | static const struct of_device_id dwapb_of_match[] = {
| ^~~~~~~~~~~~~~
Get rid of them for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no case when no context is provided in the ->suspend() and
->resume() hooks. Moreover, BUG_ON() is harmful to user and makes kernel
inoperable after the crash. Drop the BUG_ON()s for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
More usual pattern is to prepare value and then write it in a single place.
Switch code in dwapb_gpio_set_debounce() to it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use device_get_match_data() here to simplify the code a bit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert to use irqd_to_hwirq() instead of direct access to the hwirq member.
Also amend the type of the hwirq holding variable to be irq_hw_number_t.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO library provides default IRQ resource management hooks,
there is no need to repeat this in the individual driver.
Remove them for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We switch the default handler to be handle_bad_irq() instead of
handle_level_irq(), though for now apply it later in the code,
to make the difference between IRQ chips more visible.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Refactor IRQ handler in order to enter and exit chained IRQ by using
respective prologue and epilogue calls.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit 3d2613c4289f
("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver")
introduced a use of the platform driver but missed to add the following line
to it:
MODULE_ALIAS("platform:gpio-dwapb");
Add this to get driver loaded automatically if platform device is registered.
Fixes: 3d2613c4289f ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20200415141534.31240-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Aside from the APB reference clock DW GPIO controller can have a
dedicated clock connected to setup a debounce time interval for
GPIO-based IRQs. Since this functionality is optional the corresponding
clock source is also optional. Due to this lets handle the debounce
clock in the same way as it has been developed for the APB reference
clock, but using the bulk request/enable-disable methods.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200323195401.30338-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
