IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently, kvm-check-branches.sh causes each kvm.sh invocation create a
separate date-stamped directory, then after that invocation completes,
moves it into the *-group/NNNN directory. This works, but makes it more
difficult to monitor an ongoing run. This commit therefore uses the
kvm.sh --datestamp argument to make kvm.sh put the output in the right
place to start with, and also dispenses with the additional level of
datestamping. (Those wanting datestamps can find them in the log files.)
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A recent change to the DEBUG_INFO Kconfig option means that simply adding
CONFIG_DEBUG_INFO=y to the .config file and running "make oldconfig" no
longer works. It is instead necessary to add CONFIG_DEBUG_INFO_NONE=n
and (for example) CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y.
This combination will then result in CONFIG_DEBUG_INFO being selected.
This commit therefore updates the Kconfig options produced in response
to the kvm.sh --gdb, --kasan, and --kcsan Kconfig options.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If a remote system fails in certain ways, for example, if it is rebooted
without removing the contents of the /tmp directory, its remote.run file
never will be removed and the kvm-remote.sh script will loop waiting
forever. The manual workaround for this (hopefully!) rare event is to
manually remove the file, which will cause the results up to the reboot
to be collected and evaluated.
Unfortunately, to work out which system is holding things up, the user
must refer to the name of the last system whose results were collected,
then look up the name of the next system in sequence, then manually
remove the remote.run file. Even more unfortunately, this procedure can
be fooled in runs where each system handles more than one batch should
a given system take longer than expected, causing the systems to be
handled out of order.
This commit therefore causes kvm-remote.sh to print out the name of
the system it will wait on next, allowing the user to refer directly
to that name. Making the kvm-remote.sh script automatically handle
unscheduled termination of the qemu processes is left as future work.
Quite possibly deep future work.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture.sh script provides extra memory for scftorture and rcuscale.
However, the total memory provided is only 1G, which is less than the
2G that is required for KASAN testing. This commit therefore ups the
torture.sh script's 1G to 2G.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the Tasks RCU flavors are selected by their users rather than
by the rcutorture scenarios, torture.sh fails when attempting to run
NOPREEMPT scenarios for refscale and rcuscale. This commit therefore
makes torture.sh specify CONFIG_TASKS_TRACE_RCU=y to avoid such failure.
Why not also CONFIG_TASKS_RCU? Because tracing selects this one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
KASAN allots significant memory to track allocation state, and the amount
of memory has increased recently, which results in frequent OOMs on a
few of the rcutorture scenarios. This commit therefore provides 2G of
memory for --kasan runs, up from the 512M default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh saves only the build output and exit code from the
"make allmodconfig" test. This commit also saves the .config file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit passes the csdlock_debug=1 kernel parameter in order to
enable CSD-lock stall reports for torture.sh scftorure runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script reruns an previously built set of kernels, so
the vmlinux files are associated with that previous run, not this on.
This results in kvm-find_errors.sh reporting spurious failed-build errors.
This commit therefore omits the vmlinux check for kvm-again.sh runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For consecutive numbers the lscpu command collapses the output and just
shows the range with start and end. The processors are numbered that
way on POWER8.
$ sudo ppc64_cpu --smt=8
$ lscpu | grep '^NUMA node'
NUMA node(s): 2
NUMA node0 CPU(s): 0-79
NUMA node8 CPU(s): 80-159
This causes the heuristic to detect the number threads per core, looking
for the number after the first comma, to fail, and QEMU aborts because of
invalid arguments.
$ lscpu | grep '^NUMA node0' | sed -e 's/^[^,-]*(,|\-)\([0-9]*\),.*$/\1/'
NUMA node0 CPU(s): 0-79
But the lscpu command shows the number of threads per core:
$ sudo ppc64_cpu --smt=8
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 8
$ sudo ppc64_cpu --smt=off
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 1
This commit therefore directly uses that value and replaces use of grep
with "sed -n" and its "p" command.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit weakens the checks of the kvm.sh script's --torture parameter
and the kvm-recheck.sh script's parsing so that experimental torture tests
may be created without updating these two scripts. The changes required
are to the appropriate Makefile and Kconfig file, plus a directory
whose name begins with "X" must be added to the rcutorture/configs file.
This new directory's name can then be passed in via the kvm.sh script's
--torture parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture.sh script normally runs unattended, so there is not much
point in the "ssh" command asking for a password. This commit therefore
adds the "-o Batchmode=yes" argument to each "ssh" command to cause it
to fail rather than ask for a password.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An "echo" slipped in between an "ssh" and the "ret=$?" that was intended
to collect its exit code, which prevents torture.sh from detecting
"ssh" failure. This commit therefore reassociates the two.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the rcupdate.rcu_normal and rcupdate.rcu_expedited kernel
boot parameters are not regularly tested. The potential addition of
polled expedited grace-period APIs increases the amount of code that is
affected by these kernel boot parameters. This commit therefore adds a
"--do-rt" argument to torture.sh to exercise these kernel-boot options.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit fixes a couple of typos: s/--doall/--do-all/ and
s/--doallmodconfig/--do-allmodconfig/.
[ paulmck: Add Fixes: supplied by Paul Menzel. ]
Fixes: a115a775a8 ("torture: Add "make allmodconfig" to torture.sh")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture-test scripting's long-standing use of KVM as the environment
variable tracking the pathname of the rcutorture directory now conflicts
with allmodconfig builds due to the virt/kvm/Makefile.kvm file's use
of this as a makefile variable. This commit therefore changes the
torture-test scripting from KVM to RCUTORTURE, avoiding the name conflict.
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, an obtuse compiler diagnostic can fool kvm-find-errors.sh
into believing that the build was successful. This commit therefore
adds a check for a missing vmlinux file. Note that in the case of
repeated torture-test scenarios ("--configs '2*TREE01'"), the vmlinux
file will only be present in the first directory, that is, in TREE01
but not TREE01.2.
Link: https://lore.kernel.org/lkml/36bd91e4-8eda-5677-7fde-40295932a640@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture.sh scripts currently duplicates the summary lines, getting
one during the run phase and one during the summary phase of each run.
This commit therefore removes the run phase from consideration so as to
get only one summary line per run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit ups the retries for downloading the build-product tarball
to a given remote system from once to five times, the better to handle
transient network failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Compressing KASAN vmlinux files reduces torture.sh res file size from
about 100G to about 50G, which is good, but the KCSAN vmlinux files
are also large. Compressing them reduces their size from about 700M to
about 100M (but of course your mileage may vary). This commit therefore
compresses both KASAN and KCSAN vmlinux files.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further improves torture.sh run summaries by indicating
which runs' "Bugs:" counts are all KCSAN reports, and further printing
an additional end-of-run summary line when all errors reported in all
runs were KCSAN reports.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Runs having only KCSAN reports will normally print a summary line
containing only a "Bugs:" entry. However, these bugs might or might
not be KCSAN reports. This commit therefore flags runs in which all the
"Bugs:" entries are KCSAN reports.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh lists the failed runs, but it is up to the user
to work out what failed. This is especially annoying for KCSAN runs,
where RCU's tighter definitions result in failures being reported for
other parts of the kernel. This commit therefore outputs "Summary:"
lines for each failed run, allowing the user to more quickly identify
which failed runs need focused attention.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In a clear-cut case of "not thinking big enough", kvm.sh limits the
multipliers for torture-test scenarios to three digits. Although this is
large enough for any single system that I have ever run rcutorture on,
it does become a problem when you want to use kvm-remote.sh to run as
many instances of TREE09 as fit on a set of 20 systems with 80 CPUs each.
Yes, one could simply say "--configs '800*TREE09 800*TREE09'", but this
commit removes the need for that sort of hacky workaround by permitting
four-digit repetition numbers, thus allowing "--configs '1600*TREE09'".
Five-digit repetition numbers remain off the menu. Should they ever
really be needed, they can easily be added!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Console logs can sometimes have trailing control-M characters, which the
forward-progress evaluation code in kvm-recheck-rcu.sh passes through
to the user output. Which does not cause a technical problem, but which
can look ugly. This commit therefore strips the control-M characters.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
With the addition of multiple callback-flood kthreads, the maximum number
of callbacks from any one of those kthreads is reported in the rcutorture
run summary. This commit changes this to report the sum of each kthread's
maximum number of callbacks in a given callback-flooding episode.
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The echo commands following initialization of the "oldrun" variable need
to be "tee"d to $oldrun/remote-log. This commit fixes several stragglers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "exit 4" in kvm-remote.sh is pointlessly redirected, so this commit
removes the redirection.
Fixes: 0092eae4cb ("torture: Add kvm-remote.sh script for distributed rcutorture test runs")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a transient network error can kill a run if it happens while
downloading the tarball to one of the target systems. This commit
therefore does a 60-second wait and then a retry. If further experience
indicates, a more elaborate mechanism might be used later.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes kvm-find-errors.sh check for and report undefined
symbols that are detected at link time.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit brings the kvm.sh script's help text up to date with recently
(and some not-so-recently) added parameters.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes kvm-remote.sh to print the size of the tarball that
is downloaded to each of the remote systems. This size can help with
performance projections and analysis.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
By default, torture.sh allots 512M of memory for each guest OS. However,
when running scftorture with KASAN, 1G is needed. This commit therefore
causes torture.sh to provide the required 1G.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Compressing gigabyte vmlinux files can take some time, and it can be a
bit annoying to not know many more batches of compression there will be.
This commit therefore makes torture.sh print the number of files to be
compressed just before starting compression and just after compression
completes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the --kcsan argument to kvm.sh applies a laundry list of
Kconfig options. Now that KCSAN provides the CONFIG_KCSAN_STRICT Kconfig
option, this commit reduces the laundry list to this one option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It turns out that certain types of early boot bugs can result in reboot
loops, even within a guest OS running under qemu/KVM. This commit
therefore upgrades the kvm-test-1-run-qemu.sh script's hang-detection
heuristics to detect such situations and to terminate the run when
they occur.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-test-1-run-qemu.sh script logs the torture-test start time and
also when it starts getting impatient for the test to finish. However, it
does not timestamp these log messages, which can make debugging needlessly
challenging. This commit therefore adds timestamps to these messages.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There was a time long ago when the "test" command's documentation
claimed that the "-a" and "-o" arguments did something useful.
But this documentation now suggests letting the shell execute
these boolean operators, so this commit applies that suggestion to
kvm-test-1-run-qemu.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes kvm-test-1-run-batch.sh to use the new
kvm-assign-cpus.sh and kvm-get-cpus-script.sh scripts to create a
TORTURE_AFFINITY environment variable containing either an empty string
(for no affinity) or a list of CPUs to pin the scenario's vCPUs to.
The additional change to kvm-test-1-run.sh places the per-scenario
number-of-CPUs information where it can easily be found.
If there is some reason why affinity cannot be supplied, this commit
prints and logs the reason via changes to kvm-again.sh.
Finally, this commit updates the kvm-remote.sh script to copy the
qemu-affinity output files back to the host system.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is "qemu-affinity", "qemu-cmd", "qemu-retval", but also "qemu_pid".
This is hard to remember, not so good for bash tab completion, and just
plain inconsistent. This commit therefore renames the "qemu_pid" file to
"qemu-pid". A couple of the scripts must deal with old runs, and thus
must handle both "qemu_pid" and "qemu-pid", but new runs will produce
"qemu-pid".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The jitter.sh script has some entertaining awk code to generate a
hex mask from a randomly selected CPU number, which is handed to the
"taskset" command. Except that this command has a "-c" parameter to
take a comma/dash-separated list of CPU numbers. This commit therefore
saves a few lines of awk by switching to a single-number CPU list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes the kvm-test-1-run-qemu.sh script to check the
TORTURE_AFFINITY environment variable and to add "taskset" commands to
the qemu-cmd file. The first "taskset" command is applied only if the
TORTURE_AFFINITY environment variable is a non-empty string, and this
command pins the current scenario's guest OS to the specified CPUs.
The second "taskset" command reports the guest OS's affinity in a new
"qemu-affinity" file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-test-1-run-qemu.sh applies redirection to each and every
line of each qemu-cmd script. Only the first line (the only one that
is not a bash comment) needs to be redirected. Although redirecting
the comments is currently harmless, just adding to the comment, it is
an accident waiting to happen. This commit therefore adjusts the "sed"
command to redirect only the qemu-system* command itself.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes kvm.sh to use the new kvm-assign-cpus.sh and
kvm-get-cpus-script.sh scripts to create a TORTURE_AFFINITY environment
variable containing either an empty string (for no affinity) or a list
of CPUs to pin the scenario's vCPUs to. A later commit will make
use of this information to actually pin the vCPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit is a first step towards pinning guest-OS vCPUs so as
to force latency differences, especially on multi-socket systems.
The kvm.sh script puts its batch-creation awk script into a temporary
file so that later commits can add the awk code needed to dole out CPUs
so as to maximize latency differences. This awk code will be used by
multiple scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The last line of kvm-test-1-run-qemu.sh invokes parse-console.sh, but
kvm-test-1-run-qemu.sh is unaware of the PATH containing this script
and does not have the job title handy. This commit therefore moves
the invocation of parse-console.sh to kvm-test-1-run.sh, which has
PATH and title at hand. This commit does not add an invocation of
parse-console.sh to kvm-test-1-run-batch.sh because this latter script
is run in the background, and the information will be gathered at the
end of the full run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-recheck.sh attempts to create a kcsan.sum file even for
build-only runs. This results in false-positive bash errors due to
there being no console.log files in that case. This commit therefore
makes kvm-recheck.sh skip creating the kcsan.sum file for build-only runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-remote.sh script places the datestamped directory containing
all the build artifacts in the destination systems' /tmp directories,
where they accumulate runtime artifacts such as console.log. This works,
but some systems have a habit of removing files in /tmp that have not
been recently accessed. This commit therefore runs a simple script that
periodically accesses all files in the datestamped directory.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
