IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Due to an error in the datasheet the bias sense values currently don't
match the hardware. Whilst this is a change to the binding no devices
have yet shipped so updating the binding will not cause any issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231010102425.3662364-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For very slow removals the current bias sense timeout is sometimes too
short and unclamps the mic bias before the jack removal is properly
detected by the tip detect, causing a pop. As bias sense should be
tuned to deliver very few false positives, increase the timeout fairly
dramatically to cover all but the most exaggerated removals.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919103116.580305-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the bias sense is enabled along with the button detect, but
this has two problems. Firstly, the detections themselves arn't covered
by the bias sense, potentially resulting in pops and secondly, the
sequence of enabling/disabling looks like:
enable bias
enable bias sense
disable bias sense
disable bias
When the bias sense is disabled but the bias is still on the clamp is
removed and a pop results. Fix both of these issues by moving the bias
sense enable/disable to be along with the bias itself. With a resulting
sequence of:
enable bias sense
enable bias
disable bias
disable bias sense
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919103116.580305-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current default is a little excessive, reduce the pop on insertion
by reducing the time a little. The new value of 1000uS is still pretty
conservative.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919103116.580305-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The ASoC component provides the majority of the functionality of the
device, all the audio functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
