IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On guest exit, and when using GICv2 on GICv3, we use a dsb(st) to
force synchronization between the memory-mapped guest view and
the system-register view that the hypervisor uses.
This is incorrect, as the spec calls out the need for "a DSB whose
required access type is both loads and stores with any Shareability
attribute", while we're only synchronizing stores.
We also lack an isb after the dsb to ensure that the latter has
actually been executed before we start reading stuff from the sysregs.
The fix is pretty easy: turn dsb(st) into dsb(sy), and slap an isb()
just after.
Cc: stable@vger.kernel.org
Fixes: f68d2b1b73cc ("arm64: KVM: Implement vgic-v3 save/restore")
Acked-by: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The vgic code is trying to be clever when injecting GICv2 SGIs,
and will happily populate LRs with the same interrupt number if
they come from multiple vcpus (after all, they are distinct
interrupt sources).
Unfortunately, this is against the letter of the architecture,
and the GICv2 architecture spec says "Each valid interrupt stored
in the List registers must have a unique VirtualID for that
virtual CPU interface.". GICv3 has similar (although slightly
ambiguous) restrictions.
This results in guests locking up when using GICv2-on-GICv3, for
example. The obvious fix is to stop trying so hard, and inject
a single vcpu per SGI per guest entry. After all, pending SGIs
with multiple source vcpus are pretty rare, and are mostly seen
in scenario where the physical CPUs are severely overcomitted.
But as we now only inject a single instance of a multi-source SGI per
vcpu entry, we may delay those interrupts for longer than strictly
necessary, and run the risk of injecting lower priority interrupts
in the meantime.
In order to address this, we adopt a three stage strategy:
- If we encounter a multi-source SGI in the AP list while computing
its depth, we force the list to be sorted
- When populating the LRs, we prevent the injection of any interrupt
of lower priority than that of the first multi-source SGI we've
injected.
- Finally, the injection of a multi-source SGI triggers the request
of a maintenance interrupt when there will be no pending interrupt
in the LRs (HCR_NPIE).
At the point where the last pending interrupt in the LRs switches
from Pending to Active, the maintenance interrupt will be delivered,
allowing us to add the remaining SGIs using the same process.
Cc: stable@vger.kernel.org
Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework")
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On my GICv3 system, the following is printed to the kernel log at boot:
kvm [1]: 8-bit VMID
kvm [1]: IDMAP page: d20e35000
kvm [1]: HYP VA range: 800000000000:ffffffffffff
kvm [1]: vgic-v2@2c020000
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ1
kvm [1]: virtual timer IRQ4
kvm [1]: Hyp mode initialized successfully
The KVM IDMAP is a mapping of a statically allocated kernel structure,
and so printing its physical address leaks the physical placement of
the kernel when physical KASLR in effect. So change the kvm_info() to
kvm_debug() to remove it from the log output.
While at it, trim the output a bit more: IRQ numbers can be found in
/proc/interrupts, and the HYP VA and vgic-v2 lines are not highly
informational either.
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently don't allow resetting mapped IRQs from userspace, because
their state is controlled by the hardware. But we do need to reset the
state when the VM is reset, so we provide a function for the 'owner' of
the mapped interrupt to reset the interrupt state.
Currently only the timer uses mapped interrupts, so we call this
function from the timer reset logic.
Cc: stable@vger.kernel.org
Fixes: 4c60e360d6df ("KVM: arm/arm64: Provide a get_input_level for the arch timer")
Signed-off-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Calling vcpu_load() registers preempt notifiers for this vcpu and calls
kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy
lifting on arm/arm64 and will try to do things such as enabling the
virtual timer and setting us up to handle interrupts from the timer
hardware.
Loading state onto hardware registers and enabling hardware to signal
interrupts can be problematic when we're not actually about to run the
VCPU, because it makes it difficult to establish the right context when
handling interrupts from the timer, and it makes the register access
code difficult to reason about.
Luckily, now when we call vcpu_load in each ioctl implementation, we can
simply remove the call from the non-KVM_RUN vcpu ioctls, and our
kvm_arch_vcpu_load() is only used for loading vcpu content to the
physical CPU when we're actually going to run the vcpu.
Cc: stable@vger.kernel.org
Fixes: 9b062471e52a ("KVM: Move vcpu_load to arch-specific kvm_arch_vcpu_ioctl")
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Our irq_is_pending() helper function accesses multiple members of the
vgic_irq struct, so we need to hold the lock when calling it.
Add that requirement as a comment to the definition and take the lock
around the call in vgic_mmio_read_pending(), where we were missing it
before.
Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Update the initcall ordering to satisfy the following dependency
ordering:
1. DCDBAS, ACPI_WMI
2. DELL_SMBIOS, DELL_RBTN
3. DELL_LAPTOP, DELL_WMI
By assigning them to the following initcall levels:
subsys_initcall: DCDBAS, ACPI_WMI
module_init: DELL_SMBIOS, DELL_RBTN
late_initcall: DELL_LAPTOP, DELL_WMI
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled,
DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to
prevent a configuration where DELL_SMBIOS=y and either backend
dependency =m. Update the comment accordingly.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Here are a small clump of USB fixes for 4.16-rc6.
Nothing major, just a number of fixes in lots of different drivers, as
well as a PHY driver fix that snuck into this tree. Full details are in
the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWqkFYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynWYQCfRxixarpDUKd0rxqdSp/v1UFxP4AAoNFIpNrl
CpSr9aiz/V/4eLk1z7Iu
=j+5S
-----END PGP SIGNATURE-----
Merge tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a small clump of USB fixes for 4.16-rc6.
Nothing major, just a number of fixes in lots of different drivers, as
well as a PHY driver fix that snuck into this tree. Full details are
in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: musb: Fix external abort in musb_remove on omap2430
phy: qcom-ufs: add MODULE_LICENSE tag
usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
usbip: vudc: fix null pointer dereference on udc->lock
xhci: Fix front USB ports on ASUS PRIME B350M-A
usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
usb: usbmon: Read text within supplied buffer size
usb: host: xhci-rcar: add support for r8a77965
USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
usb: xhci: dbc: Fix lockdep warning
xhci: fix endpoint context tracer output
Revert "typec: tcpm: Only request matching pdos"
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
usb: quirks: add control message delay for 1b1c:1b20
uas: fix comparison for error code
usb: gadget: udc: renesas_usb3: add binging for r8a77965
usb: renesas_usbhs: add binding for r8a77965
usb: dwc2: fix STM32F7 USB OTG HS compatible
dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding
...
Here are some small TTY core and Serial driver fixes for 4.16-rc6.
They resolve some newly reported bugs, as well as some very old ones,
which is always nice to see. There is also a new device id added in
here for good measure.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWqkGNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylaUACeM81F4/D+thYZfi4qUmvko/oNbO8Ani/4Wl1z
e/dh+L3FWjQBdxLzGLEC
=m2pj
-----END PGP SIGNATURE-----
Merge tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty core and serial driver fixes for 4.16-rc6.
They resolve some newly reported bugs, as well as some very old ones,
which is always nice to see. There is also a new device id added in
here for good measure.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: imx: fix bogus dev_err
serial: sh-sci: prevent lockup on full TTY buffers
serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
earlycon: add reg-offset to physical address before mapping
serial: core: mark port as initialized in autoconfig
serial: 8250_pci: Don't fail on multiport card class
tty/serial: atmel: add new version check for usart
tty: make n_tty_read() always abort if hangup is in progress
Here are 3 staging driver fixes for 4.16-rc6
Two of them are lockdep fixes for the ashmem driver that have been
reported by a number of people recently. The last one is a fix for the
comedi driver core.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWqkHLA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yke8QCgu2O8UVv/6vfXr9LFoLibALbHVI0An1HMLGiw
KcRNTYaF0cBGBCrnPPa+
=h5d2
-----END PGP SIGNATURE-----
Merge tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are three staging driver fixes for 4.16-rc6
Two of them are lockdep fixes for the ashmem driver that have been
reported by a number of people recently. The last one is a fix for the
comedi driver core.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
staging: comedi: fix comedi_nsamples_left.
staging: android: ashmem: Fix lockdep issue during llseek
- A couple of uninitialized warnings reported by the build service.
- A doc comment warning under W=1.
- Three fall through comments not recognized under W=1.
-----BEGIN PGP SIGNATURE-----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=guYj
-----END PGP SIGNATURE-----
Merge tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux
Pull auxdisplay fixes from Miguel Ojeda:
"Silence a few warnings in auxdisplay.
- a couple of uninitialized warnings reported by the build service
- a doc comment warning under W=1
- three fall-through comments not recognized under W=1"
* tag 'auxdisplay-for-linus-v4.16-rc6' of git://github.com/ojeda/linux:
auxdisplay: img-ascii-lcd: Silence 2 uninitialized warnings
auxdisplay: img-ascii-lcd: Fix doc comment to silence warnings
auxdisplay: panel: Change comments to silence fallthrough warnings
Add a TODO file describing what needs to be added/changed before the driver
can be moved out of staging.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add driver information, link details and hardware statistics to be
reported via ethtool -S.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce the DPAA2 Ethernet Switch driver, which manages Datapath Switch
(DPSW) objects discovered on the MC bus.
Suggested-by: Alexandru Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the command build/parse APIs for operating on DPSW objects through
the DPAA2 Management Complex.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kbuild test robot reported the following warning on sparc64:
kernel/jump_label.c: In function '__jump_label_update':
kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code);
On sparc64, the jump_label entry->code field is of type u32, but
pointers are 64-bit. Silence the warning by casting entry->code to an
unsigned long before casting it to a pointer. This is also what the
sparc jump label code does.
Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "David S . Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/c966fed42be6611254a62d46579ec7416548d572.1521041026.git.jpoimboe@redhat.com
In the following commit:
9e0e3c5130e9 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool")
... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels,
but we did not annotate the 32-bit path.
Annotate it similarly.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move the source files out of staging into their final locations:
- dpcon.c goes to drivers/bus/fsl-mc/, next to the core infrastructure
- dpcon-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next
to the other internally used APIs
- dpcon.h gets merged into include/linux/fsl/mc.h, exposing the public
API
Update references in the dpaa2-eth staging driver.
DPCON stands for Data Path Concentrator - an interface between DPIO
(Data Path IO) and its users (e.g. dpaa2-eth). You can read more about
DPIO in Documentation/networking/dpaa2/overview.rst
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the source files out of staging into their final locations:
- dpbp.c goes to drivers/bus/fsl-mc/, next to the core infrastructure
- dpbp-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next
to the other internally used APIs
- dpbp.h gets merged into include/linux/fsl/mc.h, exposing the public
API
Update references in the dpaa2-eth staging driver.
DPBP stands for Data Path Buffer Pool - you can read more about the
object in Documentation/networking/dpaa2/overview.rst
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No one has publicly stepped up to maintain this broken codebase for
devices that no one uses anymore, so let's just drop the whole thing.
If someone really wants/needs it, we can revert this and they can fix
the code up to work properly.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Custom TKIP decryption replaced with lib80211 implementation.
MIC check use lib80211 too.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are dead code, including in the downstream Raspberry Pi tree.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now we just need to get the other drivers merged and finish the style
cleanups/garbage collecting so we can get out of staging.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VCHIQ firmware communication channel operates in parallel with our
other mailbox-based channel. This is the communication channel that
exposes the firmware's media decode/encode and ISP interfaces.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com> (v2)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VCHIQ communication channel can be provided by BCM283x and Capri
SoCs, to communicate with the VPU-side OS services.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's been tempting to replace this with (L1) cache_line_size(), but
that's really not what the value is about. It's about coordinating
the condition for the pagelist fragment behavior between the two
sides. However, the property was not accepted for the upstream DT
binding, so we have to use the firmware's fallback value.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ccree driver is now in the cryptodev tree, so remove it from
drivers/staging as it's no longer needed here.
Based on a patch from Gilad, but the mailing list didn't like it :(
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was requested by Rob Herring in DT bindings review.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up checkpatch error:
ERROR: do not initialise globals to 0
Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename variables with datatype 'u8' in their name to follow the linux
coding style.
Renamed following variables:
u8abort_running_scan
pu8Buffer
pu8keybuf
pu8msa
u8remain_on_chan_flag
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to avoid use of uppercase for label names, to follow linux
coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix 'line over 80 characters' issue found by checkpatch.pl script. Moved
the common code from wilc_wfi_cfg_parse_tx_action() &
wilc_wfi_cfg_parse_rx_action() to new function to avoid checkpatch issue.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
