IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fix the following fallthrough warning (on ARM):
drivers/scsi/arm/acornscsi.c:2651:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case res_success:
^
drivers/scsi/arm/acornscsi.c:2651:2: note: insert '__attribute__((fallthrough));' to silence this warning
case res_success:
^
__attribute__((fallthrough));
drivers/scsi/arm/acornscsi.c:2651:2: note: insert 'break;' to avoid fall-through
case res_success:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmECvOwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMjuAf/ZdJx7RKRQxMHG4jHGDtOIQq3qxds
2uJsFZS3MWkphSOJ+mbomdXTOCHvhPbJlr5TXaSxGnasmAAl+mDk2qVT0tH6638m
r6M+fu4X0RYvFz54Qnf96V0/elE6ee8rtteXD8WVKQ/XzE3odk1EOqbe7CBDx7yo
A3SzO8eSBzxamKo22fmE3MR5LVVAcN9wNsCb88XGDTUkTbYl+w597r6zg83rMMlL
gwD4f9+NYX6h88BVVwLUkWotUrD/5rRGpRVVEZk5eZKvFGzpukk15dfv0PA9347O
AOM0i/PgnA+Qw6ZsTetWPjD8eFcXDBurGF1tIkyo4X8VogQG0wFIHxbezQ==
=ZgK/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of
sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: add missing compat KVM_CLEAR_DIRTY_LOG
KVM: use cpu_relax when halt polling
KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrl
KVM: SVM: tweak warning about enabled AVIC on nested entry
KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
KVM: s390: restore old debugfs names
KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
KVM: selftests: Introduce access_tracking_perf_test
KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
x86/kvm: fix vcpu-id indexed array sizes
KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK access
docs: virt: kvm: api.rst: replace some characters
KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID name
KVM: nSVM: Swap the parameter order for svm_copy_vmrun_state()/svm_copy_vmloadsave_state()
KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()
KVM: arm64: selftests: get-reg-list: actually enable pmu regs in pmu sublist
KVM: selftests: change pthread_yield to sched_yield
KVM: arm64: Fix detection of shared VMAs on guest fault
Pull m68knommu fix from Greg Ungerer:
"A single compile time fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k/coldfire: change pll var. to clk_pll
Removing the qede module version which is not needed and not allowed
with inbox drivers.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removing the qed module version which is not needed and not allowed
with inbox drivers.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
NXP SJA1105 VLAN regressions
These are 3 patches to fix issues seen with some more varied testing
done after the changes in the "Traffic termination for sja1105 ports
under VLAN-aware bridge" series were made:
https://patchwork.kernel.org/project/netdevbpf/cover/20210726165536.1338471-1-vladimir.oltean@nxp.com/
Issue 1: traffic no longer works on a port after leaving a VLAN-aware bridge
Issue 2: untagged traffic not dropped if pvid is absent from a VLAN-aware port
Issue 3: PTP and STP broken on ports under a VLAN-aware bridge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On RX, a control packet with SJA1110 will have:
- an in-band control extension (DSA tag) composed of a header and an
optional trailer (if it is a timestamp frame). We can (and do) deduce
the source port and switch id from this.
- a VLAN header, which can either be the tag_8021q RX VLAN (pvid) or the
bridge VLAN. The sja1105_vlan_rcv() function attempts to deduce the
source port and switch id a second time from this.
The basic idea is that even though we don't need the source port
information from the tag_8021q header if it's a control packet, we do
need to strip that header before we pass it on to the network stack.
The problem is that we call sja1105_vlan_rcv for ports under VLAN-aware
bridges, and that function tells us it couldn't identify a tag_8021q
header, so we need to perform imprecise RX by VID. Well, we don't,
because we already know the source port and switch ID.
This patch drops the return value from sja1105_vlan_rcv and we just look
at the source_port and switch_id values from sja1105_rcv and sja1110_rcv
which were initialized to -1. If they are still -1 it means we need to
perform imprecise RX.
Fixes: 884be12f8566 ("net: dsa: sja1105: add support for imprecise RX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Surprisingly, this configuration:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1
still has the sja1105 switch sending untagged packets to the CPU (and
failing to decode them, since dsa_find_designated_bridge_port_by_vid
searches by VID 1 and rightfully finds no bridge VLAN 1 on a port).
Dumping the switch configuration, the VLANs are managed properly:
- the pvid of swp2 is 1 in the MAC Configuration Table, but
- only the CPU port is in the port membership of VLANID 1 in the VLAN
Lookup Table
When the ingress packets are tagged with VID 1, they are properly
dropped. But when they are untagged, they are able to reach the CPU
port. Also, when the pvid in the MAC Configuration Table is changed to
e.g. 55 (an unused VLAN), the untagged packets are also dropped.
So it looks like:
- the switch bypasses ingress VLAN membership checks for untagged traffic
- the reason why the untagged traffic is dropped when I make the pvid 55
is due to the lack of valid destination ports in VLAN 55, rather than
an ingress membership violation
- the ingress VLAN membership cheks are only done for VLAN-tagged traffic
Interesting. It looks like there is an explicit bit to drop untagged
traffic, so we should probably be using that to preserve user expectations.
Note that only VLAN-aware ports should drop untagged packets due to no
pvid - when VLAN-unaware, the software bridge doesn't do this even if
there is no pvid on any bridge port and on the bridge itself. So the new
sja1105_drop_untagged() function cannot simply be called with "false"
from sja1105_bridge_vlan_add() and with "true" from sja1105_bridge_vlan_del.
Instead, we need to also consider the VLAN awareness state. That means
we need to hook the "drop untagged" setting in all the same places where
the "commit pvid" logic is, and it needs to factor in all the state when
flipping the "drop untagged" bit: is our current pvid in the VLAN Lookup
Table, and is the current port in that VLAN's port membership list?
VLAN-unaware ports will never drop untagged frames because these checks
always succeed by construction, and the tag_8021q VLANs cannot be changed
by the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we no longer have the ultra-central sja1105_build_vlan_table(),
we need to be more careful about checking all corner cases manually.
For example, when a port leaves a VLAN-aware bridge, it becomes
standalone so its pvid should become a tag_8021q RX VLAN again. However,
sja1105_commit_pvid() only gets called from sja1105_bridge_vlan_add()
and from sja1105_vlan_filtering(), and no VLAN awareness change takes
place (VLAN filtering is a global setting for sja1105, so the switch
remains VLAN-aware overall).
This means that we need to put another sja1105_commit_pvid() call in
sja1105_bridge_member().
Fixes: 6dfd23d35e75 ("net: dsa: sja1105: delete vlan delta save/restore logic")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Kerr says:
====================
Add Management Component Transport Protocol support
This series adds core MCTP support to the kernel. From the Kconfig
description:
Management Component Transport Protocol (MCTP) is an in-system
protocol for communicating between management controllers and
their managed devices (peripherals, host processors, etc.). The
protocol is defined by DMTF specification DSP0236.
This option enables core MCTP support. For communicating with other
devices, you'll want to enable a driver for a specific hardware
channel.
This implementation allows a sockets-based API for sending and receiving
MCTP messages via sendmsg/recvmsg on SOCK_DGRAM sockets. Kernel stack
control is all via netlink, using existing RTM_* messages. The userspace
ABI change is fairly small; just the necessary AF_/ETH_P_/ARPHDR_
constants, a new sockaddr, and a new netlink attribute.
For MAINTAINERS, I've just included netdev@ as the list entry. I'm happy
to alter this based on preferences here - an alternative would be the
OpenBMC list (the main user of the MCTP interface), or we can create a
new list entirely.
We have a couple of interface drivers almost ready to go at the moment,
but those can wait until the core code has some review.
This is v4 of the series; v1 and v2 were both RFC.
selinux folks: CCing 01/15 due to the new PF_MCTP protocol family.
linux-doc folks: CCing 15/15 for the new MCTP overview document.
Review, comments, questions etc. are most welcome.
Cheers,
Jeremy
v2:
- change to match spec terminology: controller -> component
- require specific capabilities for bind() & sendmsg()
- add address and tag defintions to uapi
- add selinux AF_MCTP table definitions
- remove strict cflags; warnings are present in common headers
v3:
- require caps for MCTP bind() & send()
- comment typo fixes
- switch to an array for local EIDs
- fix addrinfo dump iteration & error path
- add RTM_DELADDR
- remove GENMASK() and BIT() from uapi
v4:
- drop tun patch; that can be submitted separately
- keep nipa happy: add maintainer CCs, including doc and selinux
- net-next rebase
- Include AF_MCTP in af_family_slock_keys and pf_family_names
- Introduce MODULE_ definitions earlier
- upstream change: set_link_af no longer called with RTNL held
- add kdoc for net_device.mctp_ptr
- don't inline mctp_rt_match_eid
- require rtm_type == RTN_UNICAST in route management handlers
- remove unused RTAX policy table
- fix mctp_sock->keys rcu annotations
- fix spurious rcu_read_unlock in route input
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a brief document about the sockets API provided for
sending and receiving MCTP messages from userspace.
This is roughly based on the OpenBMC design document, at:
https://github.com/openbmc/docs/blob/master/designs/mctp/mctp-kernel.md
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we have a compile-time default network
(MCTP_INITIAL_DEFAULT_NET). This change introduces a default_net field
on the net namespace, allowing future configuration for new interfaces.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have a neighbour implementation, hook it up to the output
path to set the dest hardware address for outgoing packets.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change implements MCTP fragmentation (based on route & device MTU),
and corresponding reassembly.
The MCTP specification only allows for fragmentation on the originating
message endpoint, and reassembly on the destination endpoint -
intermediate nodes do not need to reassemble/refragment. Consequently,
we only fragment in the local transmit path, and reassemble
locally-bound packets. Messages are required to be in-order, so we
simply cancel reassembly on out-of-order or missing packets.
In the fragmentation path, we just break up the message into MTU-sized
fragments; the skb structure is a simple copy for now, which we can later
improve with a shared data implementation.
For reassembly, we keep track of incoming message fragments using the
existing tag infrastructure, allocating a key on the (src,dest,tag)
tuple, and reassembles matching fragments into a skb->frag_list.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Start filling-out the socket syscalls: bind, sendmsg & recvmsg.
This requires an input route implementation, so we add to
mctp_route_input, allowing lookups on binds & message tags. This just
handles single-packet messages at present, we will add fragmentation in
a future change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds the netlink interfaces for manipulating the MCTP
neighbour table.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an initial neighbour table implementation, to be used in the route
output path.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds RTM_GETROUTE, RTM_NEWROUTE & RTM_DELROUTE handlers,
allowing management of the MCTP route table.
Includes changes from Jeremy Kerr <jk@codeconstruct.com.au>.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a simple routing table, and a couple of route output handlers, and
the mctp packet_type & handler.
Includes changes from Matt Johnston <matt@codeconstruct.com.au>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds the infrastructure for managing MCTP netdevices; we add
a pointer to the AF_MCTP-specific data to struct netdevice, and hook up
the rtnetlink operations for adding and removing addresses.
Includes changes from Matt Johnston <matt@codeconstruct.com.au>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an empty drivers/net/mctp/, for future interface drivers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change introduces the user-visible MCTP header, containing the
protocol-specific addressing definitions.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple packet header format as defined by DMTF DSP0236.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an empty socket implementation, plus initialisation/destruction
handlers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
File-scope struct nfcmrvl_if_ops is not modified so can be made const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety. This allows also
making file-scope nci_core_get_config_otp_ram_version array const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loop iterators are simple integers, no point to optimize the size and
use u8. It only raises the question whether the variable is used in
some other context.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Size of firmware is a type of size_t, so print it directly instead of
casting to int.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nfcsim_abort_cmd() does not modify struct nfcsim, so local variable
can be a pointer to const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtual_ncidev_ioctl() does not modify struct nfc_dev, so local variable
can be a pointer to const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The buffer passed to mei_nfc_send() can be const for correctness and
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct nfc_dev is not modified by nfc_get_drvdata() and
nfc_device_name() so it can be made a const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
sk_buff: optimize GRO for the common case
This is a trimmed down revision of "sk_buff: optimize layout for GRO",
specifically dropping the changes to the sk_buff layout[1].
This series tries to accomplish 2 goals:
- optimize the GRO stage for the most common scenario, avoiding a bunch
of conditional and some more code
- let owned skbs entering the GRO engine, allowing backpressure in the
veth GRO forward path.
A new sk_buff flag (!!!) is introduced and maintained for GRO's sake.
Such field uses an existing hole, so there is no change to the sk_buff
size.
[1] two main reasons:
- move skb->inner_ field requires some extra care, as some in kernel
users access and the fields regardless of skb->encapsulation.
- extending secmark size clash with ct and nft uAPIs
address the all above is possible, I think, but for sure not in a single
series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Leveraging the previous patch we can now avoid orphaning the
skb in the veth gro path, allowing correct backpressure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change leverages the infrastructure introduced by the previous
patches to allow soft devices passing to the GRO engine owned skbs
without impacting the fast-path.
It's up to the GRO caller ensuring the slow_gro bit validity before
invoking the GRO engine. The new helper skb_prepare_for_gro() is
introduced for that goal.
On slow_gro, skbs are aggregated only with equal sk.
Additionally, skb truesize on GRO recycle and free is correctly
updated so that sk wmem is not changed by the GRO processing.
rfc-> v1:
- fixed bad truesize on dev_gro_receive NAPI_FREE
- use the existing state bit
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patches, at GRO time, skb->slow_gro is
usually 0, unless the packets comes from some H/W offload
slowpath or tunnel.
We can optimize the GRO code assuming !skb->slow_gro is likely.
This remove multiple conditionals in the most common path, at the
price of an additional one when we hit the above "slow-paths".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the previous one, but tracking the
active_extensions field status.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the previous patch, but covering the dst field:
the slow_gro flag is additionally set when a dst is attached
to the skb
RFC -> v1:
- use the existing flag instead of adding a new one
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new flag tracks if any state field is set, so that
GRO requires 'unusual'/slow prepare steps.
Set such flag when a ct entry is attached to the skb,
and never clear it.
The new bit uses an existing hole into the sk_buff struct
RFC -> v1:
- use a single state bit, never clear it
- avoid moving the _nfct field
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building with -Warray-bounds on systems with 64K pages there's a
warning:
fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
fs/btrfs/disk-io.c:226:34: warning: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Warray-bounds]
226 | kaddr = page_address(buf->pages[i]);
| ~~~~~~~~~~^~~
./include/linux/mm.h:1630:48: note: in definition of macro ‘page_address’
1630 | #define page_address(page) lowmem_page_address(page)
| ^~~~
In file included from fs/btrfs/ctree.h:32,
from fs/btrfs/disk-io.c:23:
fs/btrfs/extent_io.h:98:15: note: while referencing ‘pages’
98 | struct page *pages[1];
| ^~~~~
The compiler has no way to know that in that case the nodesize is exactly
PAGE_SIZE, so the resulting number of pages will be correct (1).
Let's use num_extent_pages that makes the case nodesize == PAGE_SIZE
explicitly 1.
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This commit fixes a functional regression introduced by the commit 82f09a637dd3
("HID: ft260: improve error handling of ft260_hid_feature_report_get()")
when upon USB disconnect, the FTDI FT260 i2c device is still available within
the /dev folder.
In my company's product, where the host USB to FT260 USB connection is
hard-wired in the PCB, the issue is not reproducible. To reproduce it, I used
the VirtualBox Ubuntu 20.04 VM and the UMFT260EV1A development module for the
FTDI FT260 chip:
Plug the UMFT260EV1A module into a USB port and attach it to VM.
The VM shows 2 i2c devices under the /dev:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
The i2c-0 is not related to the FTDI FT260:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-0/name
SMBus PIIX4 adapter at 4100
The i2c-1 is created by hid-ft260.ko:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-1/name
FT260 usb-i2c bridge on hidraw1
Now, detach the FTDI FT260 USB device from VM. We expect the /dev/i2c-1
to disappear, but it's still here:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
And the kernel log shows:
[ +0.001202] usb 2-2: USB disconnect, device number 3
[ +0.000109] ft260 0003:0403:6030.0002: failed to retrieve system status
[ +0.000316] ft260 0003:0403:6030.0003: failed to retrieve system status
It happens because the commit 82f09a637dd3 changed the ft260_get_system_config()
return logic. This caused the ft260_is_interface_enabled() to exit with error
upon the FT260 device USB disconnect, which in turn, aborted the ft260_remove()
before deleting the FT260 i2c device and cleaning its sysfs stuff.
This commit restores the FT260 USB removal functionality and improves the
ft260_is_interface_enabled() code to handle correctly all chip modes defined
by the device interface configuration pins DCNF0 and DCNF1.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Acked-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The memory reserved by console/PALcode or non-volatile memory is not added
to memblock.memory.
Since commit fa3354e4ea39 (mm: free_area_init: use maximal zone PFNs rather
than zone sizes) the initialization of the memory map relies on the
accuracy of memblock.memory to properly calculate zone sizes. The holes in
memblock.memory caused by absent regions reserved by the firmware cause
incorrect initialization of struct pages which leads to BUG() during the
initial page freeing:
BUG: Bad page state in process swapper pfn:2ffc53
page:fffffc000ecf14c0 refcount:0 mapcount:1 mapping:0000000000000000 index:0x0
flags: 0x0()
raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-03841-gfa3354e4ea39-dirty #26
fffffc0001b5bd68 fffffc0001b5be80 fffffc00011cd148 fffffc000ecf14c0
fffffc00019803df fffffc0001b5be80 fffffc00011ce340 fffffc000ecf14c0
0000000000000000 fffffc0001b5be80 fffffc0001b482c0 fffffc00027d6618
fffffc00027da7d0 00000000002ff97a 0000000000000000 fffffc0001b5be80
fffffc00011d1abc fffffc000ecf14c0 fffffc0002d00000 fffffc0001b5be80
fffffc0001b2350c 0000000000300000 fffffc0001b48298 fffffc0001b482c0
Trace:
[<fffffc00011cd148>] bad_page+0x168/0x1b0
[<fffffc00011ce340>] free_pcp_prepare+0x1e0/0x290
[<fffffc00011d1abc>] free_unref_page+0x2c/0xa0
[<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30
[<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30
[<fffffc000101001c>] _stext+0x1c/0x20
Fix this by registering the reserved ranges in memblock.memory.
Link: https://lore.kernel.org/lkml/20210726192311.uffqnanxw3ac5wwi@ivybridge
Fixes: fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes")
Reported-by: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
