IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c probe function here doesn't use the id information provided in
its second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220407151831.2371706-7-steve@sk2.org
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For spdx
Space instead of tab before spdx tag
Removed repeated works
the, to, two
Replacements
much much to a much
'to to' to 'to do'
aready to already
Comunications to Communications
freqency to frequency
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220222195153.3817625-1-trix@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the following coccicheck warning:
drivers/clk/clk-si5341.c:1471: WARNING: use scnprintf or sprintf.
drivers/clk/clk-si5341.c:1486: WARNING: use scnprintf or sprintf.
drivers/clk/clk-si5341.c:1501: WARNING: use scnprintf or sprintf.
drivers/clk/clk-si5341.c:1516: WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1634280331-4150-1-git-send-email-wangqing@vivo.com
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SI5341_OUT_CFG_RDIV_FORCE2 shall be checked first to distinguish whether
a divider for a given output is set to 2 (SI5341_OUT_CFG_RDIV_FORCE2
is set) or the output is disabled (SI5341_OUT_CFG_RDIV_FORCE2 not set,
SI5341_OUT_R_REG is set 0).
Before the change, divider set to 2 (SI5341_OUT_R_REG set to 0) was
interpreted as output is disabled.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Link: https://lore.kernel.org/r/20211203141125.2447520-1-dev_public@wujek.eu
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112203816.1784610-1-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add sysfs property files to allow viewing the current and latched states of
the input present and PLL lock bits, and allow resetting the latched fault
state. This allows manual checks or automated userspace polling for faults
occurring after initialization.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-10-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a property to allow specifying that the external I2C IO pins are using
3.3V voltage thresholds rather than 1.8V.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-9-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a property to allow specifying that the device XA/XB pins are used for
an external clock input rather than for a clock crystal.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-8-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver was not previously programming the VDD_SEL values for each
output to indicate what external VDDO voltage was used for each. Add
ability to specify a regulator supplying the VDDO pin for each output of
the device. The voltage of the regulator is used to automatically set the
VDD_SEL value appropriately. If no regulator is specified and the chip is
being reconfigured, assume 2.5V which appears to be the chip default.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-7-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Update the default register settings to include the VCO_RESET_CALCODE
settings (set by the SiLabs ClockBuilder software but not described in
the datasheet). Also update part of the initialization sequence to match
ClockBuilder and the datasheet.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-6-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After initializing the device, wait for it to report that the input
clock is present and the PLL has locked before declaring success.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-5-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If the Si5341 is being initially programmed and has no stored NVM
configuration, some of the register contents may contain unexpected
values, such as zeros, which could cause divide by zero errors during
driver initialization. Trap errors caused by zero registers or zero clock
rates which could result in divide errors later in the code.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-4-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Si5341 datasheet warns that before accessing any other registers,
including the PAGE register, we need to wait for the DEVICE_READY register
to indicate the device is ready, or the process of the device loading its
state from NVM can be corrupted. Wait for DEVICE_READY on startup before
continuing initialization. This is done using a raw I2C register read
prior to setting up regmap to avoid any potential unwanted automatic PAGE
register accesses from regmap at this stage.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-3-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'err' is assigned but never read:
/drivers/clk/clk-si5341.c: In function ‘si5341_output_get_parent’:
drivers/clk/clk-si5341.c:886:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916161740.14173-5-krzk@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the Si5342, Si5344 and Si5345 chips. These are equivalent
to the Si5341 family, but with more clock input options (which are not
supported yet by this driver).
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lkml.kernel.org/r/20200507061544.11388-1-mike.looijmans@topic.nl
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Si5341 and Si5340 have multiple input clock options. So far, the driver
only supported the XTAL input, this adds support for the three external
clock inputs as well.
If the clock chip isn't programmed at boot, the driver will default to the
XTAL input as before. If there is no "xtal" clock input available, it will
pick the first connected input (e.g. "in0") as the input clock for the PLL.
One can use clock-assigned-parents to select a particular clock as input.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lkml.kernel.org/r/20200107075340.14528-1-mike.looijmans@topic.nl
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The variable n_den is initialized however that value is never read
as n_den is re-assigned a little later in the two paths of a
following if-statement. Remove the redundant assignment.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lkml.kernel.org/r/20190701165020.19840-1-colin.king@canonical.com
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Adds a driver for the Si5341 and Si5340 chips. The driver does not fully
support all features of these chips, but allows the chip to be used
without any support from the "clockbuilder pro" software.
If the chip is preprogrammed, that is, you bought one with some defaults
burned in, or you programmed the NVM in some way, the driver will just
take over the current settings and only change them on demand. Otherwise
the input must be a fixed XTAL in its most basic configuration (no
predividers, no feedback, etc.).
The driver supports dynamic changes of multisynth, output dividers and
enabling or powering down outputs and multisynths.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
[sboyd@kernel.org: Mark some things static, use BIT_ULL for big bits and
ULL for big constants]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
