IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
global variable, fix comments and rework the trace information
(Lukasz Luba)
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn)
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
Sang)
- Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
Kozlowski)
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano)
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof)
- Fix array underflow in prep_lookup_table (Dan Carpenter)
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun)
- Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall)
- Fix typos in comments on rzg2l (Biju Das)
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li)
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov)
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer)
- Fix typo in the comments for the 'tmon' tool (Slark Xiao)
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to be
used by the different sensors when registering a thermal zone
(Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmLkDEgACgkQqDIjiipP
6E9PPAf/fZRYgzqgv68lYy2hnJBZEha7z76KyKKxbPATy65VQHzHBqWyPgOnZWx8
xm26tlDJMFEGql/Sy5QetvnFdDqvY33Q0FBhDbmCdCp7vxxirDNKxXhGnxUggCIt
PrloMzC9zjgdNaFTclf/ceCFNwHPnY8l5kxGHhVDn/l5vvGFB869HKMT+13FMCQM
cKVNZY0F3BgmY0ouAMbXT2jwNm/FIYfXC9CFaQo9XhiTAvqU1h4BI08S8JdXsve0
VVBi8MB0sBolWIQ/GVlC1IWj1FhxgMfvcfZAOlyia7I4kQz7K5wAHxiHnhA+GHsZ
NdxVeGTIdmjIInvRxnsT7yR2HcitkA==
=sDfh
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 5.20-rc1 from Daniel Lezcano:
"- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba)
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn)
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
Sang)
- Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
Kozlowski)
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano)
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof)
- Fix array underflow in prep_lookup_table (Dan Carpenter)
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun)
- Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall)
- Fix typos in comments on rzg2l (Biju Das)
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li)
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov)
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer)
- Fix typo in the comments for the 'tmon' tool (Slark Xiao)
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to be
used by the different sensors when registering a thermal zone
(Daniel Lezcano)"
* tag 'thermal-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (36 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
Thierry and Uwe are doing a fine job, leaving me surplus to requirement.
Happy to pop back on-board if anything changes in the future.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-pwm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Maintainers of the directory Documentation/devicetree/bindings/pwm
are also the maintainers of the corresponding directory
include/dt-bindings/pwm.
Add the file entry for include/dt-bindings/pwm to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Maintainers of the directory Documentation/devicetree/bindings/thermal
are also the maintainers of the corresponding directory
include/dt-bindings/thermal.
Add the file entry for include/dt-bindings/thermal to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613124309.28790-1-lukas.bulwahn@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Seth has been integral in the design and implementation of idmapped
mounts and was the main architect behind the s_user_ns work which
ultimately made filesystems such as FUSE and overlayfs available in
containers. He continues to be active in both development and review.
I'm very happy he decided to maintain this feature. He has my full
trust.
Link: https://lore.kernel.org/r/20220726141615.1046027-1-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
In preparation for splitting io_uring up a bit, move it into its own
top level directory. It didn't really belong in fs/ anyway, as it's
not a file system only API.
This adds io_uring/ and moves the core files in there, and updates the
MAINTAINERS file for the new location.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- NULL check for the ralink and sunplus drivers.
- Add Jacky Bai as maintainer for the Freescale pin controllers.
- Fix pin config ops for the Ocelot LAN966x and SparX5.
- Disallow AMD pin control to be a module: the GPIO lines
need to be active in early boot, so no can do.
- Fix the Armada 37xx to use raw spinlocks in the interrupt
handler path to avoid wait context.
-----BEGIN PGP SIGNATURE-----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=OQRx
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Only driver fixes:
- NULL check for the ralink and sunplus drivers
- Add Jacky Bai as maintainer for the Freescale pin controllers
- Fix pin config ops for the Ocelot LAN966x and SparX5
- Disallow AMD pin control to be a module: the GPIO lines need to be
active in early boot, so no can do
- Fix the Armada 37xx to use raw spinlocks in the interrupt handler
path to avoid wait context"
* tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context
pinctrl: armada-37xx: make irq_lock a raw spinlock to avoid invalid wait context
pinctrl: Don't allow PINCTRL_AMD to be a module
pinctrl: ocelot: Fix pincfg
pinctrl: ocelot: Fix pincfg for lan966x
MAINTAINERS: Update freescale pin controllers maintainer
pinctrl: sunplus: Add check for kcalloc
pinctrl: ralink: Check for null return of devm_kcalloc
Add Bharat Kumar Gogada and Michal Simek as maintainers for driver and
documentation of Xilinx Versal CPM Root Port device.
Link: https://lore.kernel.org/r/20220618052022.10388-1-bharat.kumar.gogada@xilinx.com
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Commit 08e950449c62 ("dt-binding: clk: npcm845: Add binding for Nuvoton
NPCM8XX Clock") obviously adds nuvoton,npcm845-clk.h, but the file entry in
MAINTAINERS, added with commit 3670d2ec13ee ("arm64: npcm: Add support for
Nuvoton NPCM8XX BMC SoC") then refers to nuvoton,npcm8xx-clock.h.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in ARM/NUVOTON NPCM ARCHITECTURE.
Fixes: 3670d2ec13ee ("arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The drivers/gpio/gpio-i8255.h header file is also maintained.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8255 Programmable Peripheral
Interface (PPI).
The Intel 8255 PPI first appeared in the early 1970s, initially for the
Intel 8080 and later appearing in the original IBM-PC. The popularity of
the original Intel 8255 chip led to many subsequent variants and clones
of the interface in various chips and integrated circuits. Although
still popular, interfaces compatible with the Intel 8255 PPI are
nowdays typically found embedded in larger VLSI processing chips and
FPGA components rather than as discrete ICs.
A CONFIG_GPIO_I8255 Kconfig option is introduced by this patch. Modules
wanting access to these i8255 library functions should select this
Kconfig option, and import the I8255 symbol namespace.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Merge the new SoC support from Tomer Maimon:
"This patchset adds initial support for the Nuvoton
Arbel NPCM8XX Board Management controller (BMC) SoC family.
The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
The NPCM8XX computing subsystem comprises a quadcore ARM
Cortex A35 ARM-V8 architecture.
This patchset adds minimal architecture and drivers such as:
Clocksource, Clock, Reset, and WD.
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board."
I'm leaving out the clk controller driver, which is still under
review.
* nuvoton/newsoc:
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
This adds support for the Nuvoton NPCM8XX Board Management
controller (BMC) SoC family.
The NPCM8XX based quad-core Cortex-A35 ARMv8 architecture.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit e54369058f3da181fcc4c893f224a0c5a8a526b6.
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220719160821.5e68e30b@oak.ozlabs.ibm.com
Cc: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Going forward, I'll be using my kernel.org for upstream work.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220714112533.539910-3-lee@kernel.org
Commit b38213c6118b ("dt-bindings: mfd: maxim,max77693: Convert to
dtschema") converts max77693.txt to maxim,max77693.yaml and adjusts the
file entry in MAINTAINERS accordingly.
Unfortunately, the merge commit afb67df31a8c ("Merge branches [...] into
ibs-for-mfd-merged") resolves some conflict in MAINTAINERS in such a way
that the file entry for the converted text file max77693.txt, removed in
the commit above, is added back into MAINTAINERS.
Remove the file entry to this converted text file in MAXIM PMIC AND MUIC
DRIVERS FOR EXYNOS BASED BOARDS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220601073511.15721-1-lukas.bulwahn@gmail.com
Convert the dt binding for the da9063/da9063l to yaml.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220606201343.514391-4-mail@conchuod.ie
Convert the existing device tree binding to DT schema format.
The old binding listed the interrupt-controller and related properties
as required but there are sufficiently many existing usages without it
that the YAML binding does not make the interrupt properties required.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Detailed description for this pull request:
1. Add new Mediatek CCI (Cache Coherent Interconnect) devfreq driver
- Add new MediaTek Cache Coherent Interconnect (CCI) devfreq drviver
which supports the dynamic voltage and clock scaling.
This driver uses the passive devfreq governor to get target frequencies
and adjust voltages because it depends on MediaTek cpu frequency
driver. In MT8183 and MT8186, the MediaTek CCI is supplied
by the same regulators with the little core CPUs.
2. Update the devfreq drivers
- Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c
- Remove kernel-doc warnings by adding the description for unused
fucntio parameters on devfreq core.
- Use NULL to pass a null pointer rather than zero according to function
propotype on imx-bus.c
- Print error message instead of error interger value on tegra30-devfreq.c
-----BEGIN PGP SIGNATURE-----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=IXt4
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq updates for v5.20 from Chanwoo Choi:
"1. Add new Mediatek CCI (Cache Coherent Interconnect) devfreq driver
- Add new MediaTek Cache Coherent Interconnect (CCI) devfreq drviver
which supports the dynamic voltage and clock scaling.
This driver uses the passive devfreq governor to get target
frequencies and adjust voltages because it depends on MediaTek
CPU frequency driver. In MT8183 and MT8186, the MediaTek CCI is
supplied by the same regulators with the little core CPUs.
2. Update devfreq drivers
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c.
- Remove kernel-doc warnings by adding the description for unused
fucntion parameters on devfreq core.
- Use NULL to pass a null pointer rather than zero according to
function propotype on imx-bus.c.
- Print error message instead of error interger value on
tegra30-devfreq.c."
* tag 'devfreq-next-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
Register the NMI/IRQ corresponding to the A64FX's device definition
dedicated to diagnostic interrupts, so that when this interrupt is
sent using the BMC, it causes a panic. This can be used to obtain
a kernel dump.
Signed-off-by: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Link: https://lore.kernel.org/r/20220520074119.3574753-2-hasegawa-hitomi@fujitsu.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A few driver specific fixes, none especially remarkable, plus a
MAINTAINERS file update due to the previous maintainer for the NXP FSPI
driver having left the company.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLRbBsACgkQJNaLcl1U
h9AA9gf+OAayfRZrVvtaSq5024SUYym6YDRHmdUJD1Emh5VbuVHcqHZC70gdXhNu
hHSmZti5mTHbo9fvSBiuGS9MDoxBmbFsdZ4mUwE8sKYW5vnmRlaq7cnjTNWDISwp
CXNyUjJdgFuZWjNFlWDodNeuDMAdR2pDgOfKBwWyiCEVvypQuGq7Cp7yFud/eyvA
eUfSYDOoI/Ws5t1XKFf8M9YBp6yaspJ9cNLFPtVIGtDTkT9SdkjqwXCWy+iDNHhi
Nj3mciV6RA9iCi9ICr68rPsak/RxCbwOfBigFuShOc0oiQ2fhrKtVNRZuYs5/UxH
CdMmk8sCfMyZE6HO/UUcbw/LyDKoVQ==
=PphO
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes, none especially remarkable, plus a
MAINTAINERS file update due to the previous maintainer for the NXP
FSPI driver having left the company"
* tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Remove spi_master_put() in probe failure path
MAINTAINERS: change the NXP FSPI driver maintainer.
spi: amd: Limit max transfer and message size
spi: aspeed: Fix division by zero
spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptor
Most of the contents are bugfixes for the devicetree files:
- A Qualcomm MSM8974 pin controller regression, caused by a cleanup
patch that gets partially reverted here.
- Missing properties for Broadcom BCM49xx to fix timer detection and
SMP boot.
- Fix touchscreen pinctrl for imx6ull-colibri board
- Multiple fixes for Rockchip rk3399 based machines including the
vdu clock-rate fix, otg port fix on Quartz64-A and ethernet
on Quartz64-B
- Fixes for misspelled DT contents causing minor problems on
imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10,
and ls1028a
And a couple of changes elsewhere:
- Fix binding for Allwinner D1 display pipeline
- Trivial code fixes to the TEE and reset controller driver subsystems
and the rockchip platform code.
- Multiple updates to the MAINTAINERS files, marking the Palm Treo
support as orphaned, and fixing some entries for added or changed
file names.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLRXIcACgkQmmx57+YA
GNkEzxAAl65KpVU88zGDuX/e46T/vxRGzJXZtR+qB7DdzKLN2C0joFfbKRHQa4B5
WrIGxpKj4hLdn2QNE3pqhj0PZb8SpE521CjVcYEeUNrTvN8DASAHD76ZgQh3onFE
oOAY6RsAn37kGB1munbDR7ZnbclGNp4WAuhTMflNmxTiijokiod4/gbzFiD/EHIP
XtdPQHQH/fKqleU5x033SG5evQm/b/md0qNsvzFXTN0skl0it+1eqp3OmTwq7l8s
9AAHf6o/Kx3YoiLhi74NIKyXNJ5uRmITR7MWhn/fwZxlvvEWZwaw97QzaZW0EeT1
vX2BdN4w3CNLxPu+rmKaet1qKYf0KnuYDwzcKFDrzjyznedn2Zyb2sB6PBT+Zp1J
5luaAl/jccC7vQ8l/xsl1YEWwgaJC5P5iQ9PwaMxY/d/rBh+FiSZ3F5UrJfpVTl/
h9I1WNAA7dqiywFQ6yrDuYMgeTDtFwS5bm6J8VPSw9kMiNT4snxcFlAw7py1Ls7O
6yKvPHFJ36ACcc7Jz3IYyZeKI9G+LfMWE1AZ+n6SXCJF7QQSjVmI29K6hLukkxVq
9hQCKdIvKhGAkhSzIHCpR69ZFvdRcAzW6yS05CHaHmyweo3kRQhd+Df2kxxEIVzG
1plLZDk7j7oe6d1y19HweHkGiVBHynyEJR2XIgU2btY7A+R6zEI=
=oSv+
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the contents are bugfixes for the devicetree files:
- A Qualcomm MSM8974 pin controller regression, caused by a cleanup
patch that gets partially reverted here.
- Missing properties for Broadcom BCM49xx to fix timer detection and
SMP boot.
- Fix touchscreen pinctrl for imx6ull-colibri board
- Multiple fixes for Rockchip rk3399 based machines including the vdu
clock-rate fix, otg port fix on Quartz64-A and ethernet on
Quartz64-B
- Fixes for misspelled DT contents causing minor problems on
imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10, and
ls1028a
And a couple of changes elsewhere:
- Fix binding for Allwinner D1 display pipeline
- Trivial code fixes to the TEE and reset controller driver
subsystems and the rockchip platform code.
- Multiple updates to the MAINTAINERS files, marking the Palm Treo
support as orphaned, and fixing some entries for added or changed
file names"
* tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
ARM: dts: at91: sama5d2: Fix typo in i2s1 node
tee: tee_get_drvdata(): fix description of return value
optee: Remove duplicate 'of' in two places.
ARM: dts: kswitch-d10: use open drain mode for coma-mode pins
ARM: dts: colibri-imx6ull: fix snvs pinmux group
optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()
MAINTAINERS: add polarfire rng, pci and clock drivers
MAINTAINERS: mark ARM/PALM TREO SUPPORT orphan
ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
arm64: dts: ls1028a: Update SFP node to include clock
dt-bindings: display: sun4i: Fix D1 pipeline count
ARM: dts: qcom: msm8974: re-add missing pinctrl
reset: Fix devm bulk optional exclusive control getter
MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER
ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init()
arm64: dts: rockchip: Assign RK3399 VDU clock rate
arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior
...
Add documentation of device tree in YAML schema for the OV5693
CMOS image sensor from Omnivision
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLRa6sACgkQJNaLcl1U
h9Bkvwf9HJRDLQ513AIAg8QJVZ4a+vAX4dirPUkpsyxRJ9WUdaOVdYiRIwDfMKQl
Y9gH8xN3/JcLThKDuCxbyndgXEbfhu+s55VerrJ1/KAlnxZoYXcCuc+PKr78ZNCq
goMQT3EcKiJXPEXcxZVMGMsK0XaoWNycKHm/wQ+27OF8kiFs58iRvnFk27HLgd6z
ucVF7Zmj+vABIS2eou+pAvAT2Ln9OraCdwjH26nSSZ3J8z4SIvsaJXJ5Fsasevpa
ExL+RIBXTG4Xs5MH60P0P6qNV3zIuiRkLTN2BZabr7R3OHE8eW4Vz6p2QQ70eZ9R
UdusEjJONjfHwoF9jD+QIk/zv9T/BA==
=oiKM
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.20
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
Introduce a driver to configure USB Type-C mode switches and retimers
which are controlled by the Chrome OS EC (Embedded Controller).
This allows Type-C port drivers, as well as alternate mode drivers to
configure their relevant mode switches and retimers according to the
Type-C state they want to achieve.
ACPI devices with ID GOOG001A will bind to this driver.
Currently, we only register a retimer switch with a stub set function.
Subsequent patches will implement the host command set functionality,
and introduce mode switches.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20220711072333.2064341-5-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Samsung Exynos SoC Bus and Interconnect bindings to DT
schema.
Vast parts of descritpion and example were copied, so keep license as
GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add devicetree binding of MediaTek CCI on MT8183 and MT8186.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t parameter to
ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering
(after atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TFnI
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d95008 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
Commit 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch
driver") adds the section MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
with a file entry, but the file that is added with this commit is actually
named slightly differently.
file entry name: drivers/platform/surface/surface_aggregator_tablet_switch.c
added file name: drivers/platform/surface/surface_aggregator_tabletsw.c
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file entry to the actual file name added with the commit above.
Fixes: 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220713040916.1767-1-lukas.bulwahn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This introduces initial support for Lenovo ThinkPad X13s, Qualcomm 8cx
Gen 3 Compute Reference Device, SA8295P Automotive Development Platform,
Xiaomi Mi 5s Plus, five new SC7180 Chrome OS boards, Inforce IFC6560, LG
G7 ThinQ and LG V35 ThinQ.
With IPQ8074 gaining GDSC support, this was expressed in the gcc node
and defined for the USB nodes. The SDHCI reset line was defined to get
the storage devices into a known state.
For MSM8996 interconnect providers, the second DSI interface, resets for
SDHCI are introduced. Support for the Xiaomi Mi 5s Plus is introduced
and the Dragonboard 820c gains definitions for its LEDs.
The MSM8998 platform changes consists of a various cleanup patches, the
FxTec Pro1 is split out from using the MTP dts and Sony Xperia devices
on the "Yoshino" platform gains ToF sensor.
On SC7180 five new Trogdor based boards are added and the description of
keyboard and detachables is improved.
On the SC7280-based Herobrine board DisplayPort is enabled, SPI flash
clock rate is changed, WiFi is enabled and the modem firmware path is
updated. The Villager boards gains touchscreen, and keyboard backlight.
This introduces initial support for the SC8280XP (aka 8cx Gen 3) and
related automotive platforms are introduced, with support for the
Qualcomm reference board, the Lenovo Thinkpad X13s and the SA8295P
Automotive Development Platform.
In addition to a wide range of smaller fixes on the SDM630 and SDM660
platforms, support for the secondary high speed USB controller is
introduced and the Sony Xperia "Nile" platform gains support for the RGB
status LED. Support for the Inforce IFC6560 board is introduced.
On SDM845 the bandwidth monitor for the CPU subsystem is introduced, to
scale LLCC clock rate based on profiling. CPU and cluster idle states
are switched to OSI hierarchical states. DB845c and SHIFT 6mq gains LED
support and new support for the LG G7 ThinQ and LG V35 ThinQ boards are
added.
DLL/DDR configuration for SDHCI nodes are defined for SM6125.
On SM8250 the GPU per-process page tables is enabled and for RB5 the
Light Pulse Generator-based LEDs are added.
The display clock controller is introduced for SM8350.
On SM8450 this introduces the camera clock controller and the UART
typically used for Bluetooth. The interconnect path for the crypto
engine is added to the SCM node, to ensure this is adequately clocked.
The assigned-clock-rate for the display processor is dropped from
several platforms, now that the driver derrives the min and max from the
clock.
In addition to this a wide range of fixes for stylistic issues and
issues discovered through Devicetree binding validation across many
platforms and boards are introduced.
-----BEGIN PGP SIGNATURE-----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=89g4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XnF9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for v5.20
This introduces initial support for Lenovo ThinkPad X13s, Qualcomm 8cx
Gen 3 Compute Reference Device, SA8295P Automotive Development Platform,
Xiaomi Mi 5s Plus, five new SC7180 Chrome OS boards, Inforce IFC6560, LG
G7 ThinQ and LG V35 ThinQ.
With IPQ8074 gaining GDSC support, this was expressed in the gcc node
and defined for the USB nodes. The SDHCI reset line was defined to get
the storage devices into a known state.
For MSM8996 interconnect providers, the second DSI interface, resets for
SDHCI are introduced. Support for the Xiaomi Mi 5s Plus is introduced
and the Dragonboard 820c gains definitions for its LEDs.
The MSM8998 platform changes consists of a various cleanup patches, the
FxTec Pro1 is split out from using the MTP dts and Sony Xperia devices
on the "Yoshino" platform gains ToF sensor.
On SC7180 five new Trogdor based boards are added and the description of
keyboard and detachables is improved.
On the SC7280-based Herobrine board DisplayPort is enabled, SPI flash
clock rate is changed, WiFi is enabled and the modem firmware path is
updated. The Villager boards gains touchscreen, and keyboard backlight.
This introduces initial support for the SC8280XP (aka 8cx Gen 3) and
related automotive platforms are introduced, with support for the
Qualcomm reference board, the Lenovo Thinkpad X13s and the SA8295P
Automotive Development Platform.
In addition to a wide range of smaller fixes on the SDM630 and SDM660
platforms, support for the secondary high speed USB controller is
introduced and the Sony Xperia "Nile" platform gains support for the RGB
status LED. Support for the Inforce IFC6560 board is introduced.
On SDM845 the bandwidth monitor for the CPU subsystem is introduced, to
scale LLCC clock rate based on profiling. CPU and cluster idle states
are switched to OSI hierarchical states. DB845c and SHIFT 6mq gains LED
support and new support for the LG G7 ThinQ and LG V35 ThinQ boards are
added.
DLL/DDR configuration for SDHCI nodes are defined for SM6125.
On SM8250 the GPU per-process page tables is enabled and for RB5 the
Light Pulse Generator-based LEDs are added.
The display clock controller is introduced for SM8350.
On SM8450 this introduces the camera clock controller and the UART
typically used for Bluetooth. The interconnect path for the crypto
engine is added to the SCM node, to ensure this is adequately clocked.
The assigned-clock-rate for the display processor is dropped from
several platforms, now that the driver derrives the min and max from the
clock.
In addition to this a wide range of fixes for stylistic issues and
issues discovered through Devicetree binding validation across many
platforms and boards are introduced.
* tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (193 commits)
arm64: dts: qcom: sc8280xp: fix DP PHY node unit addresses
arm64: dts: qcom: sc8280xp: fix usb_0 HS PHY ref clock
arm64: dts: qcom: sc7280: fix PCIe clock reference
docs: arm: index.rst: add google/chromebook-boot-flow
arm64: dts: qcom: msm8996: clean up PCIe PHY node
arm64: dts: qcom: msm8996: use non-empty ranges for PCIe PHYs
arm64: dts: qcom: sm8450: drop UFS PHY clock-cells
arm64: dts: qcom: sm8250: drop UFS PHY clock-cells
arm64: dts: qcom: sc8280xp: drop UFS PHY clock-cells
arm64: dts: qcom: sm8450: drop USB PHY clock index
arm64: dts: qcom: sm8350: drop USB PHY clock index
arm64: dts: qcom: msm8998: drop USB PHY clock index
arm64: dts: qcom: ipq8074: drop USB PHY clock index
arm64: dts: qcom: ipq6018: drop USB PHY clock index
arm64: dts: qcom: sm8250: add missing PCIe PHY clock-cells
arm64: dts: qcom: sc7280: drop PCIe PHY clock index
Revert "arm64: dts: qcom: Fix 'reg-names' for sdhci nodes"
arm64: dts: qcom: sc7180-idp: add vdds supply to the DSI PHY
arm64: dts: qcom: sc7280: use constants for gpucc clocks and power-domains
arm64: dts: qcom: msm8996: add missing DSI clock assignments
...
Link: https://lore.kernel.org/r/20220713203939.1431054-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
-----BEGIN PGP SIGNATURE-----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=IcsE
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
iio: adc: xilinx-xadc: Make use of device properties
iio: light: cm32181: Add PM support
iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: stm32-adc: disable adc before calibration
iio: adc: stm32-adc: make safe adc disable
iio: dac: ad5380: align '*' each line and drop unneeded blank line
iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
iio: Don't use bare "unsigned"
dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
iio: dac: mcp4922: add support to mcp4921
iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
iio: adc: stm32-adc: Use generic_handle_domain_irq()
proximity: vl53l0x: Make VDD regulator actually optional
MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
iio: gyro: bmg160: Fix typo in comment
...
The cs35l41 part contains a DSP which is able to run firmware.
The cs_dsp library can be used to control the DSP.
These controls can be exposed to userspace using ALSA controls.
This library adds apis to be able to interface between
cs_dsp and hda drivers and expose the relevant controls as
ALSA controls.
[ Note: the dependency of CONFIG_SND_HDA_CS_DSP_CONTROLS Kconfig is
corrected. Also, this Kconfig isn't enabled now but will be
actually enabled in a later patch -- tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
5.20, please pull the following:
- William and Anand updates the MAINTAINERS files with new BCA SoCs
entries for a variety of PON/DSL SoCs: 63178, 63158, 4912, 6858, 6878,
6846, 6855, 6756, 63146, 6856, 63148, 6813. 63138 is now listed as a
supported BCA platform and joins the families just added.
-----BEGIN PGP SIGNATURE-----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=aGRG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pTIN
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/maintainers' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM-SoC MAINTAINERS file updates for
5.20, please pull the following:
- William and Anand updates the MAINTAINERS files with new BCA SoCs
entries for a variety of PON/DSL SoCs: 63178, 63158, 4912, 6858, 6878,
6846, 6855, 6756, 63146, 6856, 63148, 6813. 63138 is now listed as a
supported BCA platform and joins the families just added.
* tag 'arm-soc/for-5.20/maintainers' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Move BCM63138 to bcmbca arch entry
MAINTAINERS: Add BCM6813 to bcmbca arch entry
MAINTAINERS: Add BCM63148 to bcmbca arch entry
MAINTAINERS: Add BCM6856 to bcmbca arch entry
MAINTAINERS: Add BCM63146 to bcmbca arch entry
MAINTAINERS: Add BCM6756 to bcmbca arch entry
MAINTAINERS: Add BCM6855 to bcmbca arch entry
MAINTAINERS: Add BCM6846 to bcmbca arch entry
MAINTAINERS: Add BCM6878 to bcmbca arch entry
MAINTAINERS: Add BCM6858 to bcmbca arch entry
MAINTAINERS: Add BCM4912 to bcmbca arch entry
MAINTAINERS: Add BCM63158 to bcmbca arch entry
MAINTAINERS: Add BCM63178 to bcmbca arch entry
Link: https://lore.kernel.org/r/20220711164451.3542127-7-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
