IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The maximum length of a SSID is defined by 802.11 specification. It is
already defined in mac80211: IEEE80211_MAX_SSID_LEN. Therefore, use this
generic definition.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-27-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This struct hif_ie_tlv is definitively an Information Element (IE). This
struct is defined by 802.11 specification and already exists in
mac80211. Reuse this definition instead of struct hif_ie_tlv.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-26-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The union hif_indication_data is never used in the driver. So, it is not
necessary to declare it separately from hif_ind_generic.
In add, drop prefix 'indication_' from the names 'indication_type' and
'indication_data' since it is redundant with the name of the struct.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-25-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The union hif_event_data is never used in the driver. So, it is
not necessary to declare it separately from hif_ind_event.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-24-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The union hif_privacy_key_data is never used in the driver. So, it is
not necessary to declare it separately from hif_req_add_key.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-23-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structs hif_capabilities, hif_otp_regul_sel_mode_info and
hif_otp_phy_info have no real reasons to exist. Drop them and simplify
access to fields of struct hif_ind_startup.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-22-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structs hif_scan_type, hif_scan_flags and hif_auto_scan_param have
no real reasons to exist (apart maybe defining namespaces). Moreover,
the names of the fields within these structs are not all meaningful.
Drop the structs and rename the fields.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-21-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structs hif_queue, hif_data_flags, hif_tx_flags and
hif_ht_tx_parameters have no real reasons to exist. Drop them and
simplify access to fields of struct hif_req_tx.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-20-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct hif_tx_result_flags has no reason to exist. Drop it and simplify
access to struct hif_cnf_tx.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-19-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct hif_pm_mode has no reason to exist. Drop it and simplify access
to struct hif_req_set_pm_mode.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct hif_suspend_resume_flags has no reason to exist. Drop it and
simplify access to struct hif_ind_suspend_resume_tx.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct hif_map_link_flags has no reason to exist. Drop it and simplify
access to struct hif_req_map_link.
Also rename the field 'map_direction' in 'unmap'. It is more
meaningful and allows to drop enum hif_sta_map_direction.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct hif_ie_flags has no reason to exist. Drop it and simplify
access to struct hif_req_update_ie.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct hif_reset_flags has no reason to exist. Drop it and simplify
access to struct hif_req_reset.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enum hif_beacon is not used. Moreover, it is just another definition of
a boolean. Absolutely useless.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the code for multicast filtering has been dropped, the function
hif_set_data_filtering() is only called to disable multicast filtering.
In fact, the multicast filtering is already disabled by default. So,
this function is useless and can be dropped.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device allows to filter multicast frames. The driver has the
necessary code to take advantage of this feature. However, some bugs
has been reported on this feature. So, it was temporary disabled.
Finally, the things work well as-is for more than one year now. So there
is no plan to enable this feature in near future.
Since we dislike to maintain dead code, drop it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Secure Link (slk) feature allows to encrypt (and authenticate) the
traffic between the host and the device. The official implementation of
this feature relies on mbedTLS. For that reason, this implementation is
not included in the current driver. To be included, the implementation
has to rely on kernel crypto API instead of mbedTLS.
So, for now, the driver contained stub functions waiting for the new
implementation based on kernel crypto API.
This new implementation represent a bunch of work and it is unlikely to
be done in near future. Moreover, we strongly dislike to maintain
useless code. So, drop all the code related to secure link.
Whoever wants to implement secure link should revert this patch before
starting to work on it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new kind of error has appeared in API 3.4.
The Linux driver is not concerned by this new error, but let's keep the
API in sync with the firmware.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file hif_tx_mib.c expects to contain functions that format messages
for the hardware. It is unexpected to find function that manipulate
RCU and structures from mac80211.
Keep hif_set_association_mode() with the code necessary for message
formatting and relocate the smart part in wfx_join_finalize().
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wfx_join() and wfx_join_finalize() are the two halves of the association
process. Group them.
In addition, for better uniformity of the code, rename wfx_do_join() in
wfx_join().
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The statements in wfx_bss_info_changed() has no particular order.
For better readability, group and sort the statements relative to the
association processing.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200907101521.66082-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The host and the device can be connected with a called Wake-Up GPIO.
When the host fall down this GPIO, it allows the device to enter in deep
sleep and no communication with the device is no more possible (the
device wakes up automatically on DTIM and fetch data if necessary).
So, before to communicate with the device, the driver have to raise the
Wake-up GPIO and then wait for an IRQ from the device.
Unfortunately, old firmwares have a race in sleep/wake-up process and
the device may never wake up. In this case, the IRQ is not sent and
driver complains with "timeout while wake up chip". Then, the driver
tries anyway to access the bus and an other error is raised by the bus.
Fortunately, when the bug occurs, it is possible to fall down the IRQ
and the device will eventually finish the sleep process. Then the driver
can wake it up normally.
The patch implements that workaround and add a retry limit in case
something goes very wrong.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial developer has feared msecs_to_jiffies() could round down the
result. However, the documentation of msecs_to_jiffies() says that the
result is rounded upward. So the increment of the result of
msecs_to_jiffies() is not necessary.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the old days, ieee80211 powersave has some impact on the Rx speed.
These problems are solved for a long time now. There is no more reason
to not enabling it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When mac80211 debug is enabled, the trace below appears:
[60744.340037] wlan0: Rx A-MPDU request on aa:bb:cc:97:60:24 tid 0 result -524
This imply that ___ieee80211_start_rx_ba_session will prematurely exit
and frame reordering won't be enabled.
Fixes: e5da5fbd77411 ("staging: wfx: fix CCMP/TKIP replay protection")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device need to receive a skb with necessary space for the ICV. So,
the driver adds this space before to send the frame.
Currently, once the frame is sent, the driver restore the original
content of the skb. However, this step is useless. Mac80211 don't do it
when software encryption is enabled.
Once we have removed this step, it appears that it is no more necessary
to keep hw_key in tx_priv. Then, it is possible to simplify a bunch of
code in the Tx path.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When MFP is enabled, the multicast management frames are not protected,
in fact. Instead, but they should include an IE containing the MMIC of
the frames (i.e. a cryptographic signature).
Until now, the driver didn't correctly detect this kind of frames (they
are not marked protected but they are associated to a key) and didn't
ask to the device to encrypt them.
In add, the device is not able to generate the IE itself. Mac80211 has
to generate the IE and let the device compute the MMIC.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The protection of the management frames is mainly done by mac80211.
However, frames for the management of the BlockAck sessions are directly
sent by the device. These frames have to be protected if MFP is in use.
So the driver has to pass the MFP configuration to the device.
Until now, the driver directly read the RSN IE of the BSS. However, it
didn't work when the BSS was MFP capable (ieee80211w=1) and the local
device has disabled MFP (ieee80211w=0).
This patch read the MFP information directly from the struct
ieee80211_sta. This information take into account the MFP negotiated
during the association. In addition, the code is far simpler.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until now, hif_map_link() get as argument the raw value for
map_link_flags when map_link_flags is defined as a bitfield. It was
error prone.
Now hif_map_link() takes explicit value for every flags of the
struct map_link_flags.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The protection of the management frames is mainly done by mac80211.
However, frames for the management of the BlockAck sessions are directly
sent by the device. These frames have to be protected if MFP is in use.
So the driver has to pass the MFP configuration to the device.
Until now, the BlockAck management frames were completely unprotected
whatever the status of the MFP negotiation. So, some devices dropped
these frames.
The device has two knobs to control the MFP. One global and one per
station. Normally, the driver should always enable global MFP. Then it
should enable MFP on every station with which MFP was successfully
negotiated. Unfortunately, the older firmwares only provide the
global control.
So, this patch enable global MFP as it is exposed in the beacon. Then it
marks every station with which the MFP is effective.
Thus, the support for the old firmwares is not so bad. It may only
encounter some difficulties to negotiate BA sessions when the local
device (the AP) is MFP capable (ieee80211w=1) but the station is not.
The only solution for this case is to upgrade the firmware.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200825085828.399505-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are various spelling mistakes in comments and error messages.
Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200806104701.46123-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of the flex_array_size() helper to calculate the size of a
flexible array member within an enclosing structure.
This helper offers defense-in-depth against potential integer
overflows, while at the same time makes it explicitly clear that
we are dealing with a flexible array member.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200729233557.GA17693@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code has the functionality to insert the GPIO lines using
the global GPIO numbers through module parameters.
As we are clearly deprecating the use of global GPIO numbers
look up the GPIO descriptors from the device instead. This
usually falls back to device hardware descriptions using e.g.
device tree or ACPI. This device clearly supports device
tree when used over SPI for example.
For example, this can be supplied in the device tree like so:
wfx@0x01 {
compatible = "silabs,wf200";
reset-gpios = <&gpio0 1>;
wakeup-gpios = <&gpio0 2>;
};
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200703130756.514868-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable bytes_done is not initialized and hence the first
FIFO size check on bytes_done may be breaking prematurely from
the loop if bytes_done contains a large bogus uninitialized value.
Fix this by initializing bytes_done to zero.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: a9408ad79ff3 ("staging: wfx: load the firmware faster")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200706132017.487627-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When multiple interface on different channels are in use. It is
necessary to advertise the AP that the device is no more awake before to
switch to the other channel.
Until now, PS-Poll was the preferred mechanism for that. However. The
new firmwares (>= 3.7) now nicely support FastPS.
FastPS improves bandwidth and compatibility with AP.
This patch drop the complex and rarely used mechanism introduced in the
commit dd5eba1bb5b4f ("staging: wfx: fix support for AP that do not
support PS-Poll") and use FastPS as soon as it is possible.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some advanced usage or debug scenarios, it could interesting to
change the value of ps_timeout or eventually to force use of PS-Poll
frames.
The wext API (used by iwconfig) provide a way to change ps_timeout.
However, this API is obsolete and it seems a little weird to use (it
seems it does apply the change, so the user have to disable then
re-enable de power save)
On side of nl80211, there is no way to change the ps_timeout.
This patch provides a file in debugfs to change the value of ps_timeout.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To enable the TKIP/CCMP replay protection, the frames has to be
processed in the right order. However, the device is not able to
re-order the frames during BlockAck sessions.
Mac80211 is able to reorder the frames, but it need the information
about the BlockAck sessions start and stop. Unfortunately, since the
BlockAck is fully handled by the hardware, these frames were not
forwarded to the host. So, if the driver ask to mac80211 to apply the
replay protection, it drop all misordered frames.
So, until now, the driver explicitly asked to mac80211 to not apply
the CCMP/TKIP replay protection.
The situation has changed with the API 3.4 of the device firmware. The
firmware forward the BlockAck information. Mac80211 is now able to
correctly reorder the frames. There is no more reasons to drop
cryptographic data.
This patch also impact the older firmwares. There will be a performance
impact on these firmware (since the misordered frames will dropped).
However, we can't keep the replay protection disabled.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't want mac80211 try to check MMIC and other security mechanisms.
So, the driver remove all the data related to the encryption (IV, ICV,
MMIC).
However, enabling RX_FLAG_PN_VALIDATED is sufficient for that.
So, drop the useless function wfx_drop_encrypt_data() and enable
RX_FLAG_PN_VALIDATED.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems that in the old days, the RSSI information could be missing. In
this case, in order to not pollute the RSSI stats, the frame was
dropped (!).
It is far better to mark the frame with the flag RX_FLAG_NO_SIGNAL_VAL.
In add, the problem seems now fixed in the firmware (at least, it has
not been encountered with recent firmwares).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the driver does not call ieee80211_sta_set_buffered() anymore, it
is no more necessary to maintain a counter of buffered frames for each
stations.
This change allows to simplify the processing in multiple places in the
driver.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
