62cd667995
2241 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
e74acdf55d |
Modules updates for 6.0
For the 6.0 merge window the modules code shifts to cleanup and minor fixes
effort. This is becomes much easier to do and review now due to the code
split to its own directory from effort on the last kernel release. I expect
to see more of this with time and as we expand on test coverage in the future.
The cleanups and fixes come from usual suspects such as Christophe Leroy and
Aaron Tomlin but there are also some other contributors.
One particular minor fix worth mentioning is from Helge Deller, where he spotted
a *forever* incorrect natural alignment on both ELF section header tables:
* .altinstructions
* __bug_table sections
A lot of back and forth went on in trying to determine the ill effects of this
misalignment being present for years and it has been determined there should
be no real ill effects unless you have a buggy exception handler. Helge actually
hit one of these buggy exception handlers on parisc which is how he ended up
spotting this issue. When implemented correctly these paths with incorrect
misalignment would just mean a performance penalty, but given that we are
dealing with alternatives on modules and with the __bug_table (where info
regardign BUG()/WARN() file/line information associated with it is stored)
this really shouldn't be a big deal.
The only other change with mentioning is the kmap() with kmap_local_page()
and my only concern with that was on what is done after preemption, but the
virtual addresses are restored after preemption. This is only used on module
decompression.
This all has sit on linux-next for a while except the kmap stuff which has
been there for 3 weeks.
-----BEGIN PGP SIGNATURE-----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=hPvl
-----END PGP SIGNATURE-----
Merge tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"For the 6.0 merge window the modules code shifts to cleanup and minor
fixes effort. This becomes much easier to do and review now due to the
code split to its own directory from effort on the last kernel
release. I expect to see more of this with time and as we expand on
test coverage in the future. The cleanups and fixes come from usual
suspects such as Christophe Leroy and Aaron Tomlin but there are also
some other contributors.
One particular minor fix worth mentioning is from Helge Deller, where
he spotted a *forever* incorrect natural alignment on both ELF section
header tables:
* .altinstructions
* __bug_table sections
A lot of back and forth went on in trying to determine the ill effects
of this misalignment being present for years and it has been
determined there should be no real ill effects unless you have a buggy
exception handler. Helge actually hit one of these buggy exception
handlers on parisc which is how he ended up spotting this issue. When
implemented correctly these paths with incorrect misalignment would
just mean a performance penalty, but given that we are dealing with
alternatives on modules and with the __bug_table (where info regardign
BUG()/WARN() file/line information associated with it is stored) this
really shouldn't be a big deal.
The only other change with mentioning is the kmap() with
kmap_local_page() and my only concern with that was on what is done
after preemption, but the virtual addresses are restored after
preemption. This is only used on module decompression.
This all has sit on linux-next for a while except the kmap stuff which
has been there for 3 weeks"
* tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Replace kmap() with kmap_local_page()
module: Show the last unloaded module's taint flag(s)
module: Use strscpy() for last_unloaded_module
module: Modify module_flags() to accept show_state argument
module: Move module's Kconfig items in kernel/module/
MAINTAINERS: Update file list for module maintainers
module: Use vzalloc() instead of vmalloc()/memset(0)
modules: Ensure natural alignment for .altinstructions and __bug_table sections
module: Increase readability of module_kallsyms_lookup_name()
module: Fix ERRORs reported by checkpatch.pl
module: Add support for default value for module async_probe
|
||
Kim Phillips
|
e6cfcdda8c |
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
AMD's "Technical Guidance for Mitigating Branch Type Confusion,
Rev. 1.0 2022-07-12" whitepaper, under section 6.1.2 "IBPB On
Privileged Mode Entry / SMT Safety" says:
Similar to the Jmp2Ret mitigation, if the code on the sibling thread
cannot be trusted, software should set STIBP to 1 or disable SMT to
ensure SMT safety when using this mitigation.
So, like already being done for retbleed=unret, and now also for
retbleed=ibpb, force STIBP on machines that have it, and report its SMT
vulnerability status accordingly.
[ bp: Remove the "we" and remove "[AMD]" applicability parameter which
doesn't work here. ]
Fixes:
|
||
|
Linus Torvalds
|
eb5699ba31 |
Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9 kwS/13j38guulSlXRzDLmitbg81zAAI= =Zfum -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ... |
||
|
Linus Torvalds
|
cae4199f93 |
powerpc updates for 6.0
- Add support for syscall stack randomization.
- Add support for atomic operations to the 32 & 64-bit BPF JIT.
- Full support for KASAN on 64-bit Book3E.
- Add a watchdog driver for the new PowerVM hypervisor watchdog.
- Add a number of new selftests for the Power10 PMU support.
- Add a driver for the PowerVM Platform KeyStore.
- Increase the NMI watchdog timeout during live partition migration, to avoid timeouts
due to increased memory access latency.
- Add support for using the 'linux,pci-domain' device tree property for PCI domain
assignment.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas
Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz,
Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg
Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna
Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant,
Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, Zhouyi Zhou.
-----BEGIN PGP SIGNATURE-----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=tRkm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
|
||
|
Linus Torvalds
|
c993e07be0 |
dma-mapping updates
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy,
Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=Bv19
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
|
||
|
Linus Torvalds
|
1d239c1eb8 |
IOMMU Updates for Linux v5.20/v6.0:
Including:
- Most intrusive patch is small and changes the default
allocation policy for DMA addresses. Before the change the
allocator tried its best to find an address in the first 4GB.
But that lead to performance problems when that space gets
exhaused, and since most devices are capable of 64-bit DMA
these days, we changed it to search in the full DMA-mask
range from the beginning. This change has the potential to
uncover bugs elsewhere, in the kernel or the hardware. There
is a Kconfig option and a command line option to restore the
old behavior, but none of them is enabled by default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for
the dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save
memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm
driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=hI2K
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- The most intrusive patch is small and changes the default allocation
policy for DMA addresses.
Before the change the allocator tried its best to find an address in
the first 4GB. But that lead to performance problems when that space
gets exhaused, and since most devices are capable of 64-bit DMA these
days, we changed it to search in the full DMA-mask range from the
beginning.
This change has the potential to uncover bugs elsewhere, in the
kernel or the hardware. There is a Kconfig option and a command line
option to restore the old behavior, but none of them is enabled by
default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for the
dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
iommu/amd: Fix compile warning in init code
iommu/amd: Add support for AVIC when SNP is enabled
iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
ACPI/IORT: Fix build error implicit-function-declaration
drivers: iommu: fix clang -wformat warning
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
iommu/amd: Set translation valid bit only when IO page tables are in use
iommu/amd: Introduce function to check and enable SNP
iommu/amd: Globally detect SNP support
iommu/amd: Process all IVHDs before enabling IOMMU features
iommu/amd: Introduce global variable for storing common EFR and EFR2
iommu/amd: Introduce Support for Extended Feature 2 Register
iommu/amd: Change macro for IOMMU control register bit shift to decimal value
iommu/exynos: Enable default VM instance on SysMMU v7
iommu/exynos: Add SysMMU v7 register set
...
|
||
|
Linus Torvalds
|
6614a3c316 |
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
||
|
Linus Torvalds
|
7c5c3a6177 |
ARM:
* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
|
||
|
Linus Torvalds
|
12b68040a5 |
media updates for v5.20-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmLpNF4ACgkQCF8+vY7k 4RX6eQ//cYDxEbyeCbjfQH7ePDYCK8vW5EbjqBIcdFWV8rv4QdSwQbM7q4ySnxd/ nOWulm1lgpGrV3bPXE1nQ+RH7T2dQDeJobWcyZd2F2gGlnf515GYIOOnAGWnmM2Z qgDhYKVVf3cleMS44n3T2kRVIFO39MmheuucboR8PCBPaT4BoRVIEee0xZIrbsBx /ggFXSM/ywA456g09cQbhGLz48YBGshwvbN9vhrdMNcJ74cPQ+sBPaT6lRwxEBYT soaDwohH7jLGqIHxccd9qljss31q1glQrK/Szwr/kXe2d4Es0L1ctDK3oP0B9Bcv 9P6xgXIbMM3cVK57ITXsTKfBFDrxLILy+8bMHWGgRTuZVjoiybRvoDKOKqckyTfu CVsHgxkasSPr/M+WoRUX2zFTOB0Q4CTTS6A6Na+sZUGgX5dBe7Y0VDRCzskL3Q+8 KvlAzA6sF1qyI/Lm4+CprodJ8Ae4qbe0HzkWkaHzsSJfRsazzvzX391T4wCFpBOC QW3Ac7r27ZVqrIraDxGuOrEf/NRLTLpDskjnAdSERlrxtU6oQqwgRajBXU46cEOx GGV/fgwAbFXGHjN9tmRAgsJZlKBTd1wLGKWU3YUG5Emwo7ycHoLDj8+NilxyzC26 rnzK5oOaxBm9rnjoxhsz6HWN36mlY0h3bMwS8byclv6USF+ZQZk= =AUYy -----END PGP SIGNATURE----- Merge tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New driver for Semi AR0521 sensor - rkisp1 CSI code was split into a separate file - sun6i has gained support for the A31 MIPI CSI-2 controller - sun8i has gained support for the A83T MIPI CSI-2 controller - vimc driver got support for virtual lens - HEVC uAPI has gained its final form and got added to public headers - hantro and cedrus got updates on H-265 support - stkwebcam was promoted from staging - atomisp staging driver got cleanups on its hmm and kmap related logic - ov5640 gained support for more modes and got some rework - imx7-media-csi staging driver got several improvements related to mc API support - uvcvideo now handles better power line control - mediatec vcodec gained support for new hardware and got some codec updates - Lots of other bug fixes, improvements and cleanups. * tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (446 commits) media: hantro: Remove dedicated control documentation hantro: Remove incorrect HEVC SPS validation media: cedrus: hevc: Add check for invalid timestamp media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling media: uvcvideo: Fix invalid pointer in uvc_ctrl_init_ctrl() media: Documentation: mc-core: Fix typo media: videodev2.h.rst.exceptions: add missing exceptions media: vimc: wrong pointer is used with PTR_ERR media: rkisp1: debug: Add dump file in debugfs for MI main path registers media: rkisp1: Make the internal CSI-2 receiver optional media: rkisp1: Add infrastructure to support ISP features media: rkisp1: Support the ISP parallel input media: dt-bindings: media: rkisp1: Add port for parallel interface media: rkisp1: Use fwnode_graph_for_each_endpoint media: rkisp1: csi: Plumb the CSI RX subdev media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiver media: rkisp1: isp: Disallow multiple active sources media: rkisp1: isp: Rename rkisp1_get_remote_source() media: rkisp1: isp: Constify various local variables media: rkisp1: isp: Fix whitespace issues ... |
||
|
Linus Torvalds
|
f86d1fbbe7 |
Networking changes for 6.0.
Core
----
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source file
with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent
netdev_* schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF
---
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when
possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the
eBPF used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols
---------
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA,
to cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API
----------
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers
----------------------
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers
-------
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability
(parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share
the probe code (parts 1, 2), add support for phylink
mac configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than
10 years.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hxEG
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
|
||
|
Linus Torvalds
|
f00654007f |
Folio changes for 6.0
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into their
own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
/58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
=DgUi
-----END PGP SIGNATURE-----
Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
|
||
|
Linus Torvalds
|
b6bb70f9ab |
Several core optimizations:
* threadgroup_rwsem write locking is skipped when configuring controllers in
empty subtrees. Combined with CLONE_INTO_CGROUP, this allows the common
static usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
* threadgroup_rwsem used to be put into non-percpu mode by default due to
latency concerns in specific use cases. There's no reason for everyone
else to pay for it. Make the behavior optional.
* psi no longer allocates memory when disabled.
along with some code cleanups.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYugHIQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd+oAP9lfD3fTRdNo4qWV2VsZsYzoOxzNIuJSwN/dnYx
IEbQOwD/cd2YMfeo6zcb427U/VfTFqjJjFK04OeljYtJU8fFywo=
=sucy
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Several core optimizations:
- threadgroup_rwsem write locking is skipped when configuring
controllers in empty subtrees.
Combined with CLONE_INTO_CGROUP, this allows the common static
usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
- threadgroup_rwsem used to be put into non-percpu mode by default
due to latency concerns in specific use cases. There's no reason
for everyone else to pay for it. Make the behavior optional.
- psi no longer allocates memory when disabled.
... along with some code cleanups"
* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Skip subtree root in cgroup_update_dfl_csses()
cgroup: remove "no" prefixed mount options
cgroup: Make !percpu threadgroup_rwsem operations optional
cgroup: Add "no" prefixed mount options
cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
psi: dont alloc memory for psi by default
|
||
Daniel Sneddon
|
2b12993220 |
x86/speculation: Add RSB VM Exit protections
tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as
documented for RET instructions after VM exits. Mitigate it with a new
one-entry RSB stuffing mechanism and a new LFENCE.
== Background ==
Indirect Branch Restricted Speculation (IBRS) was designed to help
mitigate Branch Target Injection and Speculative Store Bypass, i.e.
Spectre, attacks. IBRS prevents software run in less privileged modes
from affecting branch prediction in more privileged modes. IBRS requires
the MSR to be written on every privilege level change.
To overcome some of the performance issues of IBRS, Enhanced IBRS was
introduced. eIBRS is an "always on" IBRS, in other words, just turn
it on once instead of writing the MSR on every privilege level change.
When eIBRS is enabled, more privileged modes should be protected from
less privileged modes, including protecting VMMs from guests.
== Problem ==
Here's a simplification of how guests are run on Linux' KVM:
void run_kvm_guest(void)
{
// Prepare to run guest
VMRESUME();
// Clean up after guest runs
}
The execution flow for that would look something like this to the
processor:
1. Host-side: call run_kvm_guest()
2. Host-side: VMRESUME
3. Guest runs, does "CALL guest_function"
4. VM exit, host runs again
5. Host might make some "cleanup" function calls
6. Host-side: RET from run_kvm_guest()
Now, when back on the host, there are a couple of possible scenarios of
post-guest activity the host needs to do before executing host code:
* on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not
touched and Linux has to do a 32-entry stuffing.
* on eIBRS hardware, VM exit with IBRS enabled, or restoring the host
IBRS=1 shortly after VM exit, has a documented side effect of flushing
the RSB except in this PBRSB situation where the software needs to stuff
the last RSB entry "by hand".
IOW, with eIBRS supported, host RET instructions should no longer be
influenced by guest behavior after the host retires a single CALL
instruction.
However, if the RET instructions are "unbalanced" with CALLs after a VM
exit as is the RET in #6, it might speculatively use the address for the
instruction after the CALL in #3 as an RSB prediction. This is a problem
since the (untrusted) guest controls this address.
Balanced CALL/RET instruction pairs such as in step #5 are not affected.
== Solution ==
The PBRSB issue affects a wide variety of Intel processors which
support eIBRS. But not all of them need mitigation. Today,
X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates
PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e.,
eIBRS systems which enable legacy IBRS explicitly.
However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT
and most of them need a new mitigation.
Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE
which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT.
The lighter-weight mitigation performs a CALL instruction which is
immediately followed by a speculative execution barrier (INT3). This
steers speculative execution to the barrier -- just like a retpoline
-- which ensures that speculation can never reach an unbalanced RET.
Then, ensure this CALL is retired before continuing execution with an
LFENCE.
In other words, the window of exposure is opened at VM exit where RET
behavior is troublesome. While the window is open, force RSB predictions
sampling for RET targets to a dead end at the INT3. Close the window
with the LFENCE.
There is a subset of eIBRS systems which are not vulnerable to PBRSB.
Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB.
Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO.
[ bp: Massage, incorporate review comments from Andy Cooper. ]
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
||
|
Linus Torvalds
|
665fe72a7d |
linux-kselftest-kunit-5.20-rc1
This KUnit update for Linux 5.20-rc1 consists of several fixes and an
important feature to discourage running KUnit tests on production
systems. Running tests on a production system could leave the system
in a bad state. This new feature adds:
- adds a new taint type, TAINT_TEST to signal that a test has been run.
This should discourage people from running these tests on production
systems, and to make it easier to tell if tests have been run
accidentally (by loading the wrong configuration, etc.)
- several documentation and tool enhancements and fixes.
-----BEGIN PGP SIGNATURE-----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=WzBX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and an important feature to discourage
running KUnit tests on production systems. Running tests on a
production system could leave the system in a bad state.
Summary:
- Add a new taint type, TAINT_TEST to signal that a test has been
run.
This should discourage people from running these tests on
production systems, and to make it easier to tell if tests have
been run accidentally (by loading the wrong configuration, etc)
- Several documentation and tool enhancements and fixes"
* tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
Documentation: KUnit: Fix example with compilation error
Documentation: kunit: Add CLI args for kunit_tool
kcsan: test: Add a .kunitconfig to run KCSAN tests
kunit: executor: Fix a memory leak on failure in kunit_filter_tests
clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig
mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro
nitro_enclaves: test: Use kunit_test_suite() macro
thunderbolt: test: Use kunit_test_suite() macro
kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites
kunit: unify module and builtin suite definitions
selftest: Taint kernel when test module loaded
module: panic: Taint the kernel when selftest modules load
Documentation: kunit: fix example run_kunit func to allow spaces in args
Documentation: kunit: Cleanup run_wrapper, fix x-ref
kunit: test.h: fix a kernel-doc markup
kunit: tool: Enable virtio/PCI by default on UML
kunit: tool: make --kunitconfig repeatable, blindly concat
kunit: add coverage_uml.config to enable GCOV on UML
kunit: tool: refactor internal kconfig handling, allow overriding
kunit: tool: introduce --qemu_args
...
|
||
|
Linus Torvalds
|
aad26f55f4 |
This was a moderately busy cycle for documentation, but nothing all that
earth-shaking:
- More Chinese translations, and an update to the Italian translations.
The Japanese, Korean, and traditional Chinese translations are
more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document, with the
movement of what useful material that remained into other docs.
- Improvements to sphinx-pre-install to, hopefully, give more useful
suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmLn9OwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtrwIAJNZoDYJJIRuVHnFkAn5EJ4b/chnR1dSTBtn
WdE/1zdAlMBWVlEGO48VZybph9Sk0v+cUGf+yviDgASQrfOhRRTkg/0u6XaBAYO0
+C2D1QDd9DggGgajxsfJfTdD3IuB78mGmCQvP17XIJW+NK1CK9rXZBnj6WC5/HJw
PCHzeeVreBxOS3W9GelMYa6vjVl7dv81x4DPllnsgU2AMk0/Ce0MVjeIZ695sOeP
Ki6jZgC2GsgFSK5kBC35OiDe5q+fDzlLfek34EUCn4SIbMALSUYWO1db122w5Pme
Ej0+UTBhD19WH1uB/rcVKnVWugi7UEUJexZsao+nC7UrdIVtYq0=
=83BG
-----END PGP SIGNATURE-----
Merge tag 'docs-6.0' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
|
||
|
Linus Torvalds
|
7d9d077c78 |
RCU pull request for v5.20 (or whatever)
This pull request contains the following branches: doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms. poll.2022.07.21a: Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods. rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead. torture.2022.06.21a: Torture-test updates. ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r vX60+QNxvUBLwA== =vUNm -----END PGP SIGNATURE----- Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ... |
||
|
Linus Torvalds
|
a0b09f2d6f |
Random number generator updates for Linux 6.0-rc1.
-----BEGIN PGP SIGNATURE-----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=Zy3d
-----END PGP SIGNATURE-----
Merge tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Though there's been a decent amount of RNG-related development during
this last cycle, not all of it is coming through this tree, as this
cycle saw a shift toward tackling early boot time seeding issues,
which took place in other trees as well.
Here's a summary of the various patches:
- The CONFIG_ARCH_RANDOM .config option and the "nordrand" boot
option have been removed, as they overlapped with the more widely
supported and more sensible options, CONFIG_RANDOM_TRUST_CPU and
"random.trust_cpu". This change allowed simplifying a bit of arch
code.
- x86's RDRAND boot time test has been made a bit more robust, with
RDRAND disabled if it's clearly producing bogus results. This would
be a tip.git commit, technically, but I took it through random.git
to avoid a large merge conflict.
- The RNG has long since mixed in a timestamp very early in boot, on
the premise that a computer that does the same things, but does so
starting at different points in wall time, could be made to still
produce a different RNG state. Unfortunately, the clock isn't set
early in boot on all systems, so now we mix in that timestamp when
the time is actually set.
- User Mode Linux now uses the host OS's getrandom() syscall to
generate a bootloader RNG seed and later on treats getrandom() as
the platform's RDRAND-like faculty.
- The arch_get_random_{seed_,}_long() family of functions is now
arch_get_random_{seed_,}_longs(), which enables certain platforms,
such as s390, to exploit considerable performance advantages from
requesting multiple CPU random numbers at once, while at the same
time compiling down to the same code as before on platforms like
x86.
- A small cleanup changing a cmpxchg() into a try_cmpxchg(), from
Uros.
- A comment spelling fix"
More info about other random number changes that come in through various
architecture trees in the full commentary in the pull request:
https://lore.kernel.org/all/20220731232428.2219258-1-Jason@zx2c4.com/
* tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: correct spelling of "overwrites"
random: handle archrandom with multiple longs
um: seed rng using host OS rng
random: use try_cmpxchg in _credit_init_bits
timekeeping: contribute wall clock to rng on time change
x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu"
random: remove CONFIG_ARCH_RANDOM
|
||
|
Linus Torvalds
|
79802ada87 |
selinux/stable-6.0 PR 20220801
-----BEGIN PGP SIGNATURE-----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=WWq1
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A relatively small set of patches for SELinux this time, eight patches
in total with really only one significant change.
The highlights are:
- Add support for proper labeling of memfd_secret anonymous inodes.
This will allow LSMs that implement the anonymous inode hooks to
apply security policy to memfd_secret() fds.
- Various small improvements to memory management: fixed leaks, freed
memory when needed, boundary checks.
- Hardened the selinux_audit_data struct with __randomize_layout.
- A minor documentation tweak to fix a formatting/style issue"
* tag 'selinux-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: selinux_add_opt() callers free memory
selinux: Add boundary check in put_entry()
selinux: fix memleak in security_read_state_kernel()
docs: selinux: add '=' signs to kernel boot options
mm: create security context for memfd_secret inodes
selinux: fix typos in comments
selinux: drop unnecessary NULL check
selinux: add __randomize_layout to selinux_audit_data
|
||
|
Linus Torvalds
|
8374cfe647 |
- Refactor DM core's mempool allocation so that it clearer by not
being split acorss files. - Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling. - Optimize DM core's more common bio splitting by eliminating the use of bio cloning with bio_split+bio_chain. Shift that cloning cost to the relatively unlikely dm_io requeue case that only occurs during error handling. Introduces dm_io_rewind() that will clone a bio that reflects the subset of the original bio that must be requeued. - Remove DM core's dm_table_get_num_targets() wrapper and audit all dm_table_get_target() callers. - Fix potential for OOM with DM writecache target by setting a default MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory, whichever is smaller). - Fix DM writecache target's stats that are reported through DM-specific table info. - Fix use-after-free crash in dm_sm_register_threshold_callback(). - Refine DM core's Persistent Reservation handling in preparation for broader work Mike Christie is doing to add compatibility with Microsoft Windows Failover Cluster. - Fix various KASAN reported bugs in the DM raid target. - Fix DM raid target crash due to md_handle_request() bio splitting that recurses to block core without properly initializing the bio's bi_dev. - Fix some code comment typos and fix some Documentation formatting. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmLoAAUACgkQxSPxCi2d A1rFUAf/RnLkzNPS1QJ1uVbiiW64zQUD2o5U8kAliOZxoXQ45U+CgL22a5VaT2R+ rI9+YSg/VX9YkdJwB6I+y7VRWjUCO3NfYOfQUX5NS8GfcPQQn2Zp+jy3t8VnjjXN 5+8Ylu5tX1+QSQiBB9JvIgiK71rSorT6H+KF6bZypL7te5kj39hDaRbmh40VOMOY QWfs8DmyJft9IHPG7Mku/rFJbdVJph3f31IoqUOoGTOKoDPDUDezhCVHi2vpFcV+ S+iCKkeXmP6eUdCnNzBreYPTcP9OtCvkZEPhFg4lh+jyhjyFq1o0B8G5cRo5jvgr GcN1GUT040sSqNXFquA4UU6RGvaxlg== =gBRJ -----END PGP SIGNATURE----- Merge tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Refactor DM core's mempool allocation so that it clearer by not being split acorss files. - Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling. - Optimize DM core's more common bio splitting by eliminating the use of bio cloning with bio_split+bio_chain. Shift that cloning cost to the relatively unlikely dm_io requeue case that only occurs during error handling. Introduces dm_io_rewind() that will clone a bio that reflects the subset of the original bio that must be requeued. - Remove DM core's dm_table_get_num_targets() wrapper and audit all dm_table_get_target() callers. - Fix potential for OOM with DM writecache target by setting a default MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory, whichever is smaller). - Fix DM writecache target's stats that are reported through DM-specific table info. - Fix use-after-free crash in dm_sm_register_threshold_callback(). - Refine DM core's Persistent Reservation handling in preparation for broader work Mike Christie is doing to add compatibility with Microsoft Windows Failover Cluster. - Fix various KASAN reported bugs in the DM raid target. - Fix DM raid target crash due to md_handle_request() bio splitting that recurses to block core without properly initializing the bio's bi_dev. - Fix some code comment typos and fix some Documentation formatting. * tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits) dm: fix dm-raid crash if md_handle_request() splits bio dm raid: fix address sanitizer warning in raid_resume dm raid: fix address sanitizer warning in raid_status dm: Start pr_preempt from the same starting path dm: Fix PR release handling for non All Registrants dm: Start pr_reserve from the same starting path dm: Allow dm_call_pr to be used for path searches dm: return early from dm_pr_call() if DM device is suspended dm thin: fix use-after-free crash in dm_sm_register_threshold_callback dm writecache: count number of blocks discarded, not number of discard bios dm writecache: count number of blocks written, not number of write bios dm writecache: count number of blocks read, not number of read bios dm writecache: return void from functions dm kcopyd: use __GFP_HIGHMEM when allocating pages dm writecache: set a default MAX_WRITEBACK_JOBS Documentation: dm writecache: Render status list as list Documentation: dm writecache: add blank line before optional parameters dm snapshot: fix typo in snapshot_map() comment dm raid: remove redundant "the" in parse_raid_params() comment dm cache: fix typo in 2 comment blocks ... |
||
|
Linus Torvalds
|
0cec3f24a7 |
arm64 updates for 5.20
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU remains
enabled and the boot time is no longer slowed to a crawl for systems
which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages on
systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to reduce
the need for cache maintenance and avoid jumping in and out of the
kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmLeccUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCysB/4ml92RJLhVwRAofbtFfVgVz3JLTSsvob9x
Z7FhNDxfM/G32wKtOHU9tHkGJ+PMVWOPajukzxkMhxmilfTyHBbiisNWVRjKQxj4
wrd07DNXPIv3bi8SWzS1y2y8ZqujZWjNJlX8SUCzEoxCVtuNKwrh96kU1jUjrkFZ
kBo4E4wBWK/qW29nClGSCgIHRQNJaB/jvITlQhkqIb0pwNf3sAUzW7QoF1iTZWhs
UswcLh/zC4q79k9poegdCt8chV5OBDLtLPnMxkyQFvsLYRp3qhyCSQQY/BxvO5JS
jT9QR6d+1ewET9BFhqHlIIuOTYBCk3xn/PR9AucUl+ZBQd2tO4B1
=LVH0
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Highlights include a major rework of our kPTI page-table rewriting
code (which makes it both more maintainable and considerably faster in
the cases where it is required) as well as significant changes to our
early boot code to reduce the need for data cache maintenance and
greatly simplify the KASLR relocation dance.
Summary:
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU
remains enabled and the boot time is no longer slowed to a crawl
for systems which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages
on systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to
reduce the need for cache maintenance and avoid jumping in and out
of the kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel
command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
arm64: fix KASAN_INLINE
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: enable THP_SWAP for arm64
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: numa: Don't check node against MAX_NUMNODES
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
...
|
||
|
Linus Torvalds
|
42efa5e3a8 |
- Remove the vendor check when selecting MWAIT as the default idle state
- Respect idle=nomwait when supplied on the kernel cmdline - Two small cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmLntx0ACgkQEsHwGGHe VUqlRxAAkULobsk6Dx3wrQcYlpA8Mt/ctttTQXWiIQwhK1j7uP0zlGWBqImr5Wsk T04g1s29azulnPs3PydCF2QlLqSyF4v2PyyUwnpKfTP6CPM+MLtz98Gm6Xcbkt+s f28ISYgNP+15tskWdNqB5XIVGkuyBdNne9TiFwtnVrJYF47FSwqEWRyqMH+bIOGT wSZUCfjcw7PtKwfIAmYq4beS2+wbY9bsfVyIz+H0ks2EVFQdjYWb/kH9PgUYEQFe VEOBsPvTHDOJt0QXEXSJjmoSRUS77Wduw56Y3L2T4jWdXXQFWJ79rqNYDBvXGAdh Y8BKM5IYFZpzrmfw2RB6jbDY/JWO5PPFvHTXogQf9+wttSerZEffVQdOeTwjT8VD wc9/ZnNkT7915033VI90V+hdFkwarq8FXuFH8TkzcxP9DQNYG8CRTZBceq0UWBl0 5RpIDwNX9JxGrR+frJi0D24qxz//wLe56UqW9hLp73NP8QtEYEW1nb1q30Q2eM3N iQblgmh63qQ/dy6JV1GFb3aePiWMUNQwcTrj1pd8YDfNlp4IsFsSswnsdAZWtr1A l9qewHkBZbbzyTQkBjExUsaIdiaMywFwnUmcQNL+fHqznZIvMhJC/oCJeS0Pe/RH alTUrYsk6Y87HFpxoXpd85a9+20m8yrA64uY8cSQguGZ9i5Lm8g= =jkpj -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Borislav Petkov: - Remove the vendor check when selecting MWAIT as the default idle state - Respect idle=nomwait when supplied on the kernel cmdline - Two small cleanups * tag 'x86_cpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Use MSR_IA32_MISC_ENABLE constants x86: Fix comment for X86_FEATURE_ZEN x86: Remove vendor checks from prefer_mwait_c1_over_halt x86: Handle idle=nomwait cmdline properly for x86_idle |
||
Paolo Bonzini
|
63f4b21041 |
Merge remote-tracking branch 'kvm/next' into kvm-next-5.20
KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID |
||
Yosry Ahmed
|
73b73bac90 |
mm: vmpressure: don't count proactive reclaim in vmpressure
memory.reclaim is a cgroup v2 interface that allows users to proactively reclaim memory from a memcg, without real memory pressure. Reclaim operations invoke vmpressure, which is used: (a) To notify userspace of reclaim efficiency in cgroup v1, and (b) As a signal for a memcg being under memory pressure for networking (see mem_cgroup_under_socket_pressure()). For (a), vmpressure notifications in v1 are not affected by this change since memory.reclaim is a v2 feature. For (b), the effects of the vmpressure signal (according to Shakeel [1]) are as follows: 1. Reducing send and receive buffers of the current socket. 2. May drop packets on the rx path. 3. May throttle current thread on the tx path. Since proactive reclaim is invoked directly by userspace, not by memory pressure, it makes sense not to throttle networking. Hence, this change makes sure that proactive reclaim caused by memory.reclaim does not trigger vmpressure. [1] https://lore.kernel.org/lkml/CALvZod68WdrXEmBpOkadhB5GPYmCXaDZzXH=yyGOCAjFRn4NDQ@mail.gmail.com/ [yosryahmed@google.com: update documentation] Link: https://lkml.kernel.org/r/20220721173015.2643248-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20220714064918.2576464-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Eiichi Tsukata
|
ea304a8b89 |
docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed
Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt" with the respective retbleed= settings. Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: corbet@lwn.net Link: https://lore.kernel.org/r/20220728043907.165688-1-eiichi.tsukata@nutanix.com |
||
Joerg Roedel
|
c10100a416 | Merge branches 'arm/exynos', 'arm/mediatek', 'arm/msm', 'arm/smmu', 'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next | ||
Jakub Kicinski
|
272ac32f56 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
João Paulo Rechi Vita
|
339170d8d3 |
docs: efi-stub: Fix paths for x86 / arm stubs
This fixes the paths of x86 / arm efi-stub source files. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessos.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220727140539.10021-1-jprvita@endlessos.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Tejun Heo
|
c808f46323 |
cgroup: remove "no" prefixed mount options
|
||
Laurent Dufour
|
118b136693 |
powerpc/pseries/mobility: set NMI watchdog factor during an LPM
During an LPM, while the memory transfer is in progress on the arrival side, some latencies are generated when accessing not yet transferred pages on the arrival side. Thus, the NMI watchdog may be triggered too frequently, which increases the risk to hit an NMI interrupt in a bad place in the kernel, leading to a kernel panic. Disabling the Hard Lockup Watchdog until the memory transfer could be a too strong work around, some users would want this timeout to be eventually triggered if the system is hanging even during an LPM. Introduce a new sysctl variable nmi_watchdog_factor. It allows to apply a factor to the NMI watchdog timeout during an LPM. Just before the CPUs are stopped for the switchover sequence, the NMI watchdog timer is set to watchdog_thresh + factor% A value of 0 has no effect. The default value is 200, meaning that the NMI watchdog is set to 30s during LPM (based on a 10s watchdog_thresh value). Once the memory transfer is achieved, the factor is reset to 0. Setting this value to a high number is like disabling the NMI watchdog during an LPM. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220713154729.80789-5-ldufour@linux.ibm.com |
||
Will Deacon
|
f96d67a8af |
Merge branch 'for-next/boot' into for-next/core
* for-next/boot: (34 commits) arm64: fix KASAN_INLINE arm64: Add an override for ID_AA64SMFR0_EL1.FA64 arm64: Add the arm64.nosve command line option arm64: Add the arm64.nosme command line option arm64: Expose a __check_override primitive for oddball features arm64: Allow the idreg override to deal with variable field width arm64: Factor out checking of a feature against the override into a macro arm64: Allow sticky E2H when entering EL1 arm64: Save state of HCR_EL2.E2H before switch to EL1 arm64: Rename the VHE switch to "finalise_el2" arm64: mm: fix booting with 52-bit address space arm64: head: remove __PHYS_OFFSET arm64: lds: use PROVIDE instead of conditional definitions arm64: setup: drop early FDT pointer helpers arm64: head: avoid relocating the kernel twice for KASLR arm64: kaslr: defer initialization to initcall where permitted arm64: head: record CPU boot mode after enabling the MMU arm64: head: populate kernel page tables with MMU and caches on arm64: head: factor out TTBR1 assignment into a macro arm64: idreg-override: use early FDT mapping in ID map ... |
||
|
Will Deacon
|
288e21b6b2 |
Merge branch 'for-next/perf' into for-next/core
* for-next/perf: drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node() docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING drivers/perf: hisi: add driver for HNS3 PMU drivers/perf: hisi: Add description for HNS3 PMU driver drivers/perf: riscv_pmu_sbi: perf format perf/arm-cci: Use the bitmap API to allocate bitmaps drivers/perf: riscv_pmu: Add riscv pmu pm notifier perf: hisi: Extract hisi_pmu_init perf/marvell_cn10k: Fix TAD PMU register offset perf/marvell_cn10k: Remove useless license text when SPDX-License-Identifier is already used arm64: cpufeature: Allow different PMU versions in ID_DFR0_EL1 perf/arm-cci: fix typo in comment drivers/perf:Directly use ida_alloc()/free() drivers/perf: Directly use ida_alloc()/free() |
||
|
Tejun Heo
|
6a010a49b6 |
cgroup: Make !percpu threadgroup_rwsem operations optional
|
||
|
Tejun Heo
|
30312730bd |
cgroup: Add "no" prefixed mount options
We allow modifying these mount options via remount. Let's add "no" prefixed variants so that they can be turned off too. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> |
||
|
Linus Torvalds
|
4ba1329cbb |
Urgent RCU pull request for v5.19
This pull request contains a pair of commits that fix |
||
Tianyu Lan
|
7231180903 |
swiotlb: clean up some coding style and minor issues
- Fix the used field of struct io_tlb_area wasn't initialized
- Set area number to be 0 if input area number parameter is 0
- Use array_size() to calculate io_tlb_area array size
- Make parameters of swiotlb_do_find_slots() more reasonable
Fixes: 26ffb91fa5e0 ("swiotlb: split up the global swiotlb lock")
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
||
Paul E. McKenney
|
d38c8fe483 |
Merge branches 'doc.2022.06.21a', 'fixes.2022.07.19a', 'nocb.2022.07.19a', 'poll.2022.07.21a', 'rcu-tasks.2022.06.21a' and 'torture.2022.06.21a' into HEAD
doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates. poll.2022.07.21a: Polled grace-period updates. rcu-tasks.2022.06.21a: Tasks RCU updates. torture.2022.06.21a: Torture-test updates. |
||
Joel Fernandes
|
b37a667c62 |
rcu/nocb: Add an option to offload all CPUs on boot
Systems built with CONFIG_RCU_NOCB_CPU=y but booted without either the rcu_nocbs= or rcu_nohz_full= kernel-boot parameters will not have callback offloading on any of the CPUs, nor can any of the CPUs be switched to enable callback offloading at runtime. Although this is intentional, it would be nice to have a way to offload all the CPUs without having to make random bootloaders specify either the rcu_nocbs= or the rcu_nohz_full= kernel-boot parameters. This commit therefore provides a new CONFIG_RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that switches the default so as to offload callback processing on all of the CPUs. This default can still be overridden using the rcu_nocbs= and rcu_nohz_full= kernel-boot parameters. Reviewed-by: Kalesh Singh <kaleshsingh@google.com> Reviewed-by: Uladzislau Rezki <urezki@gmail.com> (In v4.1, fixed issues with CONFIG maze reported by kernel test robot). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> |
||
Neeraj Upadhyay
|
4f2bfd9494 |
srcu: Make expedited RCU grace periods block even less frequently
The purpose of commit |
||
Jason A. Donenfeld
|
049f9ae93d |
x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu"
The decision of whether or not to trust RDRAND is controlled by the "random.trust_cpu" boot time parameter or the CONFIG_RANDOM_TRUST_CPU compile time default. The "nordrand" flag was added during the early days of RDRAND, when there were worries that merely using its values could compromise the RNG. However, these days, RDRAND values are not used directly but always go through the RNG's hash function, making "nordrand" no longer useful. Rather, the correct switch is "random.trust_cpu", which not only handles the relevant trust issue directly, but also is general to multiple CPU types, not just x86. However, x86 RDRAND does have a history of being occasionally problematic. Prior, when the kernel would notice something strange, it'd warn in dmesg and suggest enabling "nordrand". We can improve on that by making the test a little bit better and then taking the step of automatically disabling RDRAND if we detect it's problematic. Also disable RDSEED if the RDRAND test fails. Cc: x86@kernel.org Cc: Theodore Ts'o <tytso@mit.edu> Suggested-by: H. Peter Anvin <hpa@zytor.com> Suggested-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Dan Moulding
|
5a704629f2 |
init: add "hostname" kernel parameter
The gethostname system call returns the hostname for the current machine. However, the kernel has no mechanism to initially set the current machine's name in such a way as to guarantee that the first userspace process to call gethostname will receive a meaningful result. It relies on some unspecified userspace process to first call sethostname before gethostname can produce a meaningful name. Traditionally the machine's hostname is set from userspace by the init system. The init system, in turn, often relies on a configuration file (say, /etc/hostname) to provide the value that it will supply in the call to sethostname. Consequently, the file system containing /etc/hostname usually must be available before the hostname will be set. There may, however, be earlier userspace processes that could call gethostname before the file system containing /etc/hostname is mounted. Such a process will get some other, likely meaningless, name from gethostname (such as "(none)", "localhost", or "darkstar"). A real-world example where this can happen, and lead to undesirable results, is with mdadm. When assembling arrays, mdadm distinguishes between "local" arrays and "foreign" arrays. A local array is one that properly belongs to the current machine, and a foreign array is one that is (possibly temporarily) attached to the current machine, but properly belongs to some other machine. To determine if an array is local or foreign, mdadm may compare the "homehost" recorded on the array with the current hostname. If mdadm is run before the root file system is mounted, perhaps because the root file system itself resides on an md-raid array, then /etc/hostname isn't yet available and the init system will not yet have called sethostname, causing mdadm to incorrectly conclude that all of the local arrays are foreign. Solving this problem *could* be delegated to the init system. It could be left up to the init system (including any init system that starts within an initramfs, if one is in use) to ensure that sethostname is called before any other userspace process could possibly call gethostname. However, it may not always be obvious which processes could call gethostname (for example, udev itself might not call gethostname, but it could via udev rules invoke processes that do). Additionally, the init system has to ensure that the hostname configuration value is stored in some place where it will be readily accessible during early boot. Unfortunately, every init system will attempt to (or has already attempted to) solve this problem in a different, possibly incorrect, way. This makes getting consistently working configurations harder for users. I believe it is better for the kernel to provide the means by which the hostname may be set early, rather than making this a problem for the init system to solve. The option to set the hostname during early startup, via a kernel parameter, provides a simple, reliable way to solve this problem. It also could make system configuration easier for some embedded systems. [dmoulding@me.com: v2] Link: https://lkml.kernel.org/r/20220506060310.7495-2-dmoulding@me.com Link: https://lkml.kernel.org/r/20220505180651.22849-2-dmoulding@me.com Signed-off-by: Dan Moulding <dmoulding@me.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Yunke Cao
|
39146d1141 |
media: vimc: documentation for lens
Add documentation for vimc-lens. Add a lens into the vimc topology graph. Signed-off-by: Yunke Cao <yunkec@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Jakub Kicinski
|
816cd16883 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
include/net/sock.h |
||
Lukas Bulwahn
|
3cb5e51686 |
docs: admin: devices: drop confusing outdated statement on Latex
The statement that the Latex version of Linux Device List is unmaintained, must go back to some historic time where there were actually two separate document sources, one in a txt format and another in a tex format (maybe even just on lanana.org). Nowadays, html and tex are generated from the ReST document file and the statement might be confused, believing the actual generated LaTeX document from the maintained ReST document could be an unmaintained one. Remove this statement on the LaTeX version and only keep pointing out that the version on lanana.org is no longer maintained. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220704122537.3407-6-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Mikulas Patocka
|
2ee73ef60d |
dm writecache: count number of blocks discarded, not number of discard bios
Change dm-writecache, so that it counts the number of blocks discarded
instead of the number of discard bios. Make it consistent with the
read and write statistics counters that were changed to count the
number of blocks instead of bios.
Fixes:
|
||
|
Mikulas Patocka
|
b2676e1482 |
dm writecache: count number of blocks written, not number of write bios
Change dm-writecache, so that it counts the number of blocks written
instead of the number of write bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes:
|
||
|
Mikulas Patocka
|
2c6e755b49 |
dm writecache: count number of blocks read, not number of read bios
Change dm-writecache, so that it counts the number of blocks read
instead of the number of read bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes:
|
||
Tianyu Lan
|
20347fca71 |
swiotlb: split up the global swiotlb lock
Traditionally swiotlb was not performance critical because it was only used for slow devices. But in some setups, like TDX/SEV confidential guests, all IO has to go through swiotlb. Currently swiotlb only has a single lock. Under high IO load with multiple CPUs this can lead to significat lock contention on the swiotlb lock. This patch splits the swiotlb bounce buffer pool into individual areas which have their own lock. Each CPU tries to allocate in its own area first. Only if that fails does it search other areas. On freeing the allocation is freed into the area where the memory was originally allocated from. Area number can be set via swiotlb kernel parameter and is default to be possible cpu number. If possible cpu number is not power of 2, area number will be round up to the next power of 2. This idea from Andi Kleen patch(https://github.com/intel/tdx/commit/ 4529b5784c141782c72ec9bd9a92df2b68cb7d45). Based-on-idea-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
Saravana Kannan
|
ae39e9ed96 |
module: Add support for default value for module async_probe
Add a module.async_probe kernel command line option that allows enabling async probing for all modules. When this command line option is used, there might still be some modules for which we want to explicitly force synchronous probing, so extend <modulename>.async_probe to take an optional bool input so that async probing can be disabled for a specific module. Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
Antoine Tenart
|
40ad0a52ef |
Documentation: add a description for net.core.high_order_alloc_disable
A description is missing for the net.core.high_order_alloc_disable
option in admin-guide/sysctl/net.rst ; add it. The above sysctl option
was introduced by commit
|
||
Mauro Carvalho Chehab
|
7ac3945d8e |
Documentation: KVM: update amd-memory-encryption.rst references
Changeset |
||
Bagas Sanjaya
|
11093e6f0d |
Documentation: dm writecache: Render status list as list
The status list isn't rendered as list, but rather as normal paragraph,
because there is missing blank line between "Status:" line and the list.
Fix the issue by adding the blank line separator.
Fixes:
|
||
|
Mauro Carvalho Chehab
|
8b301af4c6 |
Documentation: dm writecache: add blank line before optional parameters
Otherwise this warning occurs: Documentation/admin-guide/device-mapper/writecache.rst:23: WARNING: Unexpected indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org> |
||
|
Will Deacon
|
aaaee7b55c |
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
After commit
|
||
Suravee Suthikulpanit
|
bbe3a10658 |
iommu/amd: Add PCI segment support for ivrs_[ioapic/hpet/acpihid] commands
By default, PCI segment is zero and can be omitted. To support system with non-zero PCI segment ID, modify the parsing functions to allow PCI segment ID. Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20220706113825.25582-33-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
Guangbin Huang
|
39915b6b5f |
drivers/perf: hisi: Add description for HNS3 PMU driver
HNS3 PMU End Point device is supported on HiSilicon HIP09 platform, so add document hns3-pmu.rst to provide guidance on how to use it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/20220628063419.38514-2-huangguangbin2@huawei.com Signed-off-by: Will Deacon <will@kernel.org> |
||
Muchun Song
|
6636109512 |
mm: memory_hotplug: make hugetlb_optimize_vmemmap compatible with memmap_on_memory
For now, the feature of hugetlb_free_vmemmap is not compatible with the feature of memory_hotplug.memmap_on_memory, and hugetlb_free_vmemmap takes precedence over memory_hotplug.memmap_on_memory. However, someone wants to make memory_hotplug.memmap_on_memory takes precedence over hugetlb_free_vmemmap since memmap_on_memory makes it more likely to succeed memory hotplug in close-to-OOM situations. So the decision of making hugetlb_free_vmemmap take precedence is not wise and elegant. The proper approach is to have hugetlb_vmemmap.c do the check whether the section which the HugeTLB pages belong to can be optimized. If the section's vmemmap pages are allocated from the added memory block itself, hugetlb_free_vmemmap should refuse to optimize the vmemmap, otherwise, do the optimization. Then both kernel parameters are compatible. So this patch introduces VmemmapSelfHosted to mask any non-optimizable vmemmap pages. The hugetlb_vmemmap can use this flag to detect if a vmemmap page can be optimized. [songmuchun@bytedance.com: walk vmemmap page tables to avoid false-positive] Link: https://lkml.kernel.org/r/20220620110616.12056-3-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220617135650.74901-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Co-developed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
SeongJae Park
|
6acfcd0d75 |
Docs/admin-guide/damon: add a document for DAMON_LRU_SORT
This commit documents the usage of DAMON_LRU_SORT for admins. Link: https://lkml.kernel.org/r/20220613192301.8817-10-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
b57e39a743 |
Docs/admin-guide/damon/sysfs: document 'LRU_DEPRIO' scheme action
This commit documents the 'LRU_DEPRIO' scheme action for DAMON sysfs interface.` Link: https://lkml.kernel.org/r/20220613192301.8817-8-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
0bcba960b1 |
Docs/admin-guide/damon/sysfs: document 'LRU_PRIO' scheme action
This commit documents the 'lru_prio' scheme action for DAMON sysfs interface. Link: https://lkml.kernel.org/r/20220613192301.8817-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Roman Gushchin
|
bbf535fd6f |
mm: shrinkers: add scan interface for shrinker debugfs
Add a scan interface which allows to trigger scanning of a particular shrinker and specify memcg and numa node. It's useful for testing, debugging and profiling of a specific scan_objects() callback. Unlike alternatives (creating a real memory pressure and dropping caches via /proc/sys/vm/drop_caches) this interface allows to interact with only one shrinker at once. Also, if a shrinker is misreporting the number of objects (as some do), it doesn't affect scanning. [roman.gushchin@linux.dev: improve typing, fix arg count checking] Link: https://lkml.kernel.org/r/YpgKttTowT22mKPQ@carbon [akpm@linux-foundation.org: fix arg count checking] Link: https://lkml.kernel.org/r/20220601032227.4076670-7-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Roman Gushchin
|
7507f0991d |
mm: docs: document shrinker debugfs
Add a document describing the shrinker debugfs interface. Link: https://lkml.kernel.org/r/20220601032227.4076670-5-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
2054980125 |
Docs/admin-guide/damon/reclaim: remove a paragraph that been obsolete due to online tuning support
Patch series "mm/damon: trivial cleanups". This patchset contains trivial cleansups for DAMON code. This patch (of 6): Commit |
||
David Gow
|
2852ca7fba |
panic: Taint kernel if tests are run
Most in-kernel tests (such as KUnit tests) are not supposed to run on production systems: they may do deliberately illegal things to trigger errors, and have security implications (for example, KUnit assertions will often deliberately leak kernel addresses). Add a new taint type, TAINT_TEST to signal that a test has been run. This will be printed as 'N' (originally for kuNit, as every other sensible letter was taken.) This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc.) Acked-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Marc Zyngier
|
504ee23611 |
arm64: Add the arm64.nosve command line option
In order to be able to completely disable SVE even if the HW seems to support it (most likely because the FW is broken), move the SVE setup into the EL2 finalisation block, and use a new idreg override to deal with it. Note that we also nuke id_aa64zfr0_el1 as a byproduct, and that SME also gets disabled, due to the dependency between the two features. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220630160500.1536744-9-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Marc Zyngier
|
b3000e2133 |
arm64: Add the arm64.nosme command line option
In order to be able to completely disable SME even if the HW seems to support it (most likely because the FW is broken), move the SME setup into the EL2 finalisation block, and use a new idreg override to deal with it. Note that we also nuke id_aa64smfr0_el1 as a byproduct. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220630160500.1536744-8-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
Matthew Wilcox (Oracle)
|
2bb876b58d |
filemap: Remove add_to_page_cache() and add_to_page_cache_locked()
These functions have no more users, so delete them. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> |
||
Christophe Leroy
|
56e54b4e6c |
powerpc/32: Remove 'noltlbs' kernel parameter
Mapping without large TLBs has no added value on the 8xx. Mapping without large TLBs is still necessary on 40x when selecting CONFIG_KFENCE or CONFIG_DEBUG_PAGEALLOC or CONFIG_STRICT_KERNEL_RWX, but this is done automatically and doesn't require user selection. Remove 'noltlbs' kernel parameter, the user has no reason to use it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/80ca17bd39cf608a8ebd0764d7064a498e131199.1655202721.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
1ce844973b |
powerpc/32: Remove the 'nobats' kernel parameter
Mapping without BATs doesn't bring any added value to the user. Remove that option. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6977314c823cfb728bc0273cea634b41807bfb64.1655202721.git.christophe.leroy@csgroup.eu |
||
Liu Song
|
e92b25731e |
arm64: correct the effect of mitigations off on kpti
If KASLR is enabled, then kpti will be forced to be enabled even if mitigations off, so we need to adjust the description of this parameter. Signed-off-by: Liu Song <liusong@linux.alibaba.com> Link: https://lore.kernel.org/r/1656033648-84181-1-git-send-email-liusong@linux.alibaba.com Signed-off-by: Will Deacon <will@kernel.org> |
||
Mike Rapoport
|
ee65728e10 |
docs: rename Documentation/vm to Documentation/mm
so it will be consistent with code mm directory and with Documentation/admin-guide/mm and won't be confused with virtual machines. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Tested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Wu XiangCheng <bobwxc@email.cn> |
||
akpm
|
46a3b11253 | Merge branch 'master' into mm-stable | ||
Peter Zijlstra
|
3ebc170068 |
x86/bugs: Add retbleed=ibpb
jmp2ret mitigates the easy-to-attack case at relatively low overhead. It mitigates the long speculation windows after a mispredicted RET, but it does not mitigate the short speculation window from arbitrary instruction boundaries. On Zen2, there is a chicken bit which needs setting, which mitigates "arbitrary instruction boundaries" down to just "basic block boundaries". But there is no fix for the short speculation window on basic block boundaries, other than to flush the entire BTB to evict all attacker predictions. On the spectrum of "fast & blurry" -> "safe", there is (on top of STIBP or no-SMT): 1) Nothing System wide open 2) jmp2ret May stop a script kiddy 3) jmp2ret+chickenbit Raises the bar rather further 4) IBPB Only thing which can count as "safe". Tentative numbers put IBPB-on-entry at a 2.5x hit on Zen2, and a 10x hit on Zen1 according to lmbench. [ bp: Fixup feature bit comments, document option, 32-bit build fix. ] Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> |
||
Pawan Gupta
|
7c693f54c8 |
x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS
Extend spectre_v2= boot option with Kernel IBRS. [jpoimboe: no STIBP with IBRS] Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> |
||
|
Kim Phillips
|
e8ec1b6e08 |
x86/bugs: Enable STIBP for JMP2RET
For untrained return thunks to be fully effective, STIBP must be enabled or SMT disabled. Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> |
||
Alexandre Chartre
|
7fbf47c7ce |
x86/bugs: Add AMD retbleed= boot parameter
Add the "retbleed=<value>" boot parameter to select a mitigation for RETBleed. Possible values are "off", "auto" and "unret" (JMP2RET mitigation). The default value is "auto". Currently, "retbleed=auto" will select the unret mitigation on AMD and Hygon and no mitigation on Intel (JMP2RET is not effective on Intel). [peterz: rebase; add hygon] [jpoimboe: cleanups] Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> |
||
Stephen Kitt
|
30fb876141 |
docs: admin-guide/sysctl: Fix rendering error
Text in ``literal`` markup must be separated by word separators, so text like ``lowwater``% renders incorrectly. Add the suggested "\ " after two problematic occurrences. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20220624110230.595740-1-steve@sk2.org [jc: tweaked to use "\ "] Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
David Matlack
|
ada51a9de7 |
KVM: x86/mmu: Extend Eager Page Splitting to nested MMUs
Add support for Eager Page Splitting pages that are mapped by nested
MMUs. Walk through the rmap first splitting all 1GiB pages to 2MiB
pages, and then splitting all 2MiB pages to 4KiB pages.
Note, Eager Page Splitting is limited to nested MMUs as a policy rather
than due to any technical reason (the sp->role.guest_mode check could
just be deleted and Eager Page Splitting would work correctly for all
shadow MMU pages). There is really no reason to support Eager Page
Splitting for tdp_mmu=N, since such support will eventually be phased
out, and there is no current use case supporting Eager Page Splitting on
hosts where TDP is either disabled or unavailable in hardware.
Furthermore, future improvements to nested MMU scalability may diverge
the code from the legacy shadow paging implementation. These
improvements will be simpler to make if Eager Page Splitting does not
have to worry about legacy shadow paging.
Splitting huge pages mapped by nested MMUs requires dealing with some
extra complexity beyond that of the TDP MMU:
(1) The shadow MMU has a limit on the number of shadow pages that are
allowed to be allocated. So, as a policy, Eager Page Splitting
refuses to split if there are KVM_MIN_FREE_MMU_PAGES or fewer
pages available.
(2) Splitting a huge page may end up re-using an existing lower level
shadow page tables. This is unlike the TDP MMU which always allocates
new shadow page tables when splitting.
(3) When installing the lower level SPTEs, they must be added to the
rmap which may require allocating additional pte_list_desc structs.
Case (2) is especially interesting since it may require a TLB flush,
unlike the TDP MMU which can fully split huge pages without any TLB
flushes. Specifically, an existing lower level page table may point to
even lower level page tables that are not fully populated, effectively
unmapping a portion of the huge page, which requires a flush. As of
this commit, a flush is always done always after dropping the huge page
and before installing the lower level page table.
This TLB flush could instead be delayed until the MMU lock is about to be
dropped, which would batch flushes for multiple splits. However these
flushes should be rare in practice (a huge page must be aliased in
multiple SPTEs and have been split for NX Huge Pages in only some of
them). Flushing immediately is simpler to plumb and also reduces the
chances of tripping over a CPU bug (e.g. see iTLB multihit).
[ This commit is based off of the original implementation of Eager Page
Splitting from Peter in Google's kernel from 2016. ]
Suggested-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-23-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Paul E. McKenney
|
89f7f29140 |
doc: Document rcutree.nocb_nobypass_lim_per_jiffy kernel parameter
This commit provides documentation for the kernel parameter controlling RCU's handling of callback floods on offloaded (rcu_nocbs) CPUs. This parameter might be obscure, but it is always there when you need it. Reported-by: Frederic Weisbecker <frederic@kernel.org> Reported-by: Uladzislau Rezki <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> |
||
|
Paul E. McKenney
|
71de1e34f1 |
doc: Document the rcutree.rcu_divisor kernel boot parameter
This commit adds kernel-parameters.txt documentation for the rcutree.rcu_divisor kernel boot parameter, which controls the softirq callback-invocation batch limit. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> |
||
Hans Verkuil
|
d7365ae8ea |
media: vivid.rst: document HDMI Video Guard Band control
Document this new vivid test control. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
Qi Zheng
|
673520f8da |
mm: memcontrol: add {pgscan,pgsteal}_{kswapd,direct} items in memory.stat of cgroup v2
There are already statistics of {pgscan,pgsteal}_kswapd and
{pgscan,pgsteal}_direct of memcg event here, but now only the sum of the
two is displayed in memory.stat of cgroup v2.
In order to obtain more accurate information during monitoring and
debugging, and to align with the display in /proc/vmstat, it better to
display {pgscan,pgsteal}_kswapd and {pgscan,pgsteal}_direct separately.
Also, for forward compatibility, we still display pgscan and pgsteal items
so that it won't break existing applications.
[zhengqi.arch@bytedance.com: add comment for memcg_vm_event_stat (suggested by Michal)]
Link: https://lkml.kernel.org/r/20220606154028.55030-1-zhengqi.arch@bytedance.com
[zhengqi.arch@bytedance.com: fix the doc, thanks to Johannes]
Link: https://lkml.kernel.org/r/20220607064803.79363-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20220604082209.55174-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Linus Torvalds
|
24625f7d91 |
ARM64:
* Properly reset the SVE/SME flags on vcpu load
* Fix a vgic-v2 regression regarding accessing the pending
state of a HW interrupt from userspace (and make the code
common with vgic-v3)
* Fix access to the idreg range for protected guests
* Ignore 'kvm-arm.mode=protected' when using VHE
* Return an error from kvm_arch_init_vm() on allocation failure
* A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
* Typo fix in arch/riscv/kvm/vmid.c
* Remove broken reference pattern from MAINTAINERS entry
x86-64:
* Fix error in page tables with MKTME enabled
* Dirty page tracking performance test extended to running a nested
guest
* Disable APICv/AVIC in cases that it cannot implement correctly
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKjTIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNhPQgAiIVtp8aepujUM/NhkNyK3SIdLzlS
oZCZiS6bvaecKXi/QvhBU0EBxAEyrovk3lmVuYNd41xI+PDjyaA4SDIl5DnToGUw
bVPNFSYqjpF939vUUKjc0RCdZR4o5g3Od3tvWoHTHviS1a8aAe5o9pcpHpD0D6Mp
Gc/o58nKAOPl3htcFKmjymqo3Y6yvkJU9NB7DCbL8T5mp5pJ959Mw1/LlmBaAzJC
OofrynUm4NjMyAj/mAB1FhHKFyQfjBXLhiVlS0SLiiEA/tn9/OXyVFMKG+n5VkAZ
Q337GMFe2RikEIuMEr3Rc4qbZK3PpxHhaj+6MPRuM0ho/P4yzl2Nyb/OhA==
=h81Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit
|
||
|
Linus Torvalds
|
8e8afafb0b |
Yet another hw vulnerability with a software mitigation: Processor MMIO
Stale Data. They are a class of MMIO-related weaknesses which can expose stale data by propagating it into core fill buffers. Data which can then be leaked using the usual speculative execution methods. Mitigations include this set along with microcode updates and are similar to MDS and TAA vulnerabilities: VERW now clears those buffers too. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKXMkMTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoWGPD/idalLIhhV5F2+hZIKm0WSnsBxAOh9K 7y8xBxpQQ5FUfW3vm7Pg3ro6VJp7w2CzKoD4lGXzGHriusn3qst3vkza9Ay8xu8g RDwKe6hI+p+Il9BV9op3f8FiRLP9bcPMMReW/mRyYsOnJe59hVNwRAL8OG40PY4k hZgg4Psfvfx8bwiye5efjMSe4fXV7BUCkr601+8kVJoiaoszkux9mqP+cnnB5P3H zW1d1jx7d6eV1Y063h7WgiNqQRYv0bROZP5BJkufIoOHUXDpd65IRF3bDnCIvSEz KkMYJNXb3qh7EQeHS53NL+gz2EBQt+Tq1VH256qn6i3mcHs85HvC68gVrAkfVHJE QLJE3MoXWOqw+mhwzCRrEXN9O1lT/PqDWw8I4M/5KtGG/KnJs+bygmfKBbKjIVg4 2yQWfMmOgQsw3GWCRjgEli7aYbDJQjany0K/qZTq54I41gu+TV8YMccaWcXgDKrm cXFGUfOg4gBm4IRjJ/RJn+mUv6u+/3sLVqsaFTs9aiib1dpBSSUuMGBh548Ft7g2 5VbFVSDaLjB2BdlcG7enlsmtzw0ltNssmqg7jTK/L7XNVnvxwUoXw+zP7RmCLEYt UV4FHXraMKNt2ZketlomC8ui2hg73ylUp4pPdMXCp7PIXp9sVamRTbpz12h689VJ /s55bWxHkR6S =LBxT -----END PGP SIGNATURE----- Merge tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MMIO stale data fixes from Thomas Gleixner: "Yet another hw vulnerability with a software mitigation: Processor MMIO Stale Data. They are a class of MMIO-related weaknesses which can expose stale data by propagating it into core fill buffers. Data which can then be leaked using the usual speculative execution methods. Mitigations include this set along with microcode updates and are similar to MDS and TAA vulnerabilities: VERW now clears those buffers too" * tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/mmio: Print SMT warning KVM: x86/speculation: Disable Fill buffer clear within guests x86/speculation/mmio: Reuse SRBDS mitigation for SBDS x86/speculation/srbds: Update SRBDS mitigation selection x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data x86/speculation/mmio: Enable CPU Fill buffer clearing on idle x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data x86/speculation: Add a common function for MD_CLEAR mitigation update x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug Documentation: Add documentation for Processor MMIO Stale Data |
||
Randy Dunlap
|
8d6d51edcb |
docs: selinux: add '=' signs to kernel boot options
Provide the full kernel boot option string (with ending '=' sign).
They won't work without that and that is how other boot options are
listed.
If used without an '=' sign (as listed here), they cause an "Unknown
parameters" message and are added to init's argument strings,
polluting them.
Unknown kernel command line parameters "enforcing checkreqprot
BOOT_IMAGE=/boot/bzImage-517rc6", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
enforcing
checkreqprot
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
[PM: removed bogus 'Fixes' line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
|
Will Deacon
|
cde5042adf |
KVM: arm64: Ignore 'kvm-arm.mode=protected' when using VHE
Ignore 'kvm-arm.mode=protected' when using VHE so that kvm_get_mode() only returns KVM_MODE_PROTECTED on systems where the feature is available. Cc: David Brazdil <dbrazdil@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220609121223.2551-4-will@kernel.org |
||
Wyes Karny
|
8bcedb4ce0 |
x86: Handle idle=nomwait cmdline properly for x86_idle
When kernel is booted with idle=nomwait do not use MWAIT as the default idle state. If the user boots the kernel with idle=nomwait, it is a clear direction to not use mwait as the default idle state. However, the current code does not take this into consideration while selecting the default idle state on x86. Fix it by checking for the idle=nomwait boot option in prefer_mwait_c1_over_halt(). Also update the documentation around idle=nomwait appropriately. [ dhansen: tweak commit message ] Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Link: https://lkml.kernel.org/r/fdc2dc2d0a1bc21c2f53d989ea2d2ee3ccbc0dbe.1654538381.git-series.wyes.karny@amd.com |
||
|
Linus Torvalds
|
500a434fc5 |
Driver core changes for 5.19-rc1
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
||
|
Linus Torvalds
|
50fd82b3a9 |
A handful of late-arriving documentation fixes and the addition of an SVG
tux logo which, I'm assured, we're going to want. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmKZLSEPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YvDgH/RKxfYbTZmNinh8Sk0hvQwfhJdp92J6UjElc csheqKyK7Qvm8Gv4OtpXABhmrE7LBNQK9CU4EzqgW1t3vtA/syiYfpAQfjzSyEyG /RVFwd9XHJTBW+ZraYtDNrgmMPgDwQ6GFfDUzHKc2++Xn0Hj4jzeKgk9KiZu0JN3 MJOPY4mCnRWWQd0jceQPp3ZqBiZuHKC5rIwVfWQXuCP10NsQxc3dpXOqKePfFC5A SUDJN5S8GLPj25qqjHBe4+MyDf+lhXBbTSu2aAjYJkbFWTEY1TrA6DHX9LHCaQng s3HDbQwrk2DOx6Uaz2foBbDM6tIpzyF3iWVbSoSbqhpurRG94xM= =hhkL -----END PGP SIGNATURE----- Merge tag 'docs-5.19-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes and the addition of an SVG tux logo which, I'm assured, we're going to want" * tag 'docs-5.19-2' of git://git.lwn.net/linux: documentation: Format button_dev as a pointer. docs: add SVG version of the Linux logo docs: move Linux logo into a new `images` folder docs: blockdev: change title to match section content docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0 |
||
Joel Colledge
|
938285a130 |
docs: blockdev: change title to match section content
This index.rst was added in commit
|
||
|
Linus Torvalds
|
700170bf6b |
NFS Client Updates for Linux 5.18
- New Features: - Add support for 'dacl' and 'sacl' attributes - Bugfixes and Cleanups: - Fixes for reporting mapping errors - Fixes for memory allocation errors - Improve warning message when locks are lost - Update documentation for the nfs4_unique_id parameter - Add an explanation of NFSv4 client identifiers - Ensure the i_size attribute is written to the fscache storage - Fix freeing uninitialized nfs4_labels - Better handling when xprtrdma bc_serv is NULL - Marke qualified async operations as MOVEABLE tasks -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmKWhFQACgkQ18tUv7Cl QOszjRAAllmtKLbzOkwQwcT3e5ljh9NEJ8NL+Nv1SXjozpFY+1fuXc0ivT4rniU6 68ZHz+faK2UtLytwOO94M0jo2RCAlYS5rfnts89CpdfP3bqmGPAj0Ytw/c/vg+Qf 4eQbAzz++T35DgU7cdeKKZKg9Wtwbq7g0kYv1W8QCiCbxakSjnc/V9Ll5XhS/CAC 1WqKD90TRKUkX0Y1NNsNdXB1dJn/6QAq9B6JTjan+2Rhn7/NCTU8p98mEZGcVD7r cPHyXTqkPF4IH7lgjEMIRf6eXEzDDZNIs98QLdHJ2Gk0LxW7p7IL7VW8TKzYunvl coA1bZfYhUZBUJ+eDrrKZ5hHMSn/+eNR5iiIcfqtyU8o3J0NXAXGlLh/iJSGsxIH PjyjWSfpCgoZVPc4dG3lxR9Iu7UZeAuuB2ZoiNakUkd+UNKK5U5PpaPnYT6adaIp TegivZclCmgyLQiAdPRifDzhaL5J2pp6kVb5iMY6oX+ObyclW/UcqzKMqIKSt3R8 6+JAmZ6633ojS4r3xFsw/dlEUWuuVq7kYwXK209LqiBn5vvjWNa/WgH4MaSfnJe9 rlw+fs8Aky0w59IhzRJMMVCJ/Q2EYDKmtQLQgYVw80RBFiFgBpMW0wDqMGiddTcu 1IZ2c5+t1GxfASpyu8miexQjRJW6A2MTp0gfHGiHarxdCpaAycA= =0ccI -----END PGP SIGNATURE----- Merge tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client updates from Anna Schumaker: "New Features: - Add support for 'dacl' and 'sacl' attributes Bugfixes and Cleanups: - Fixes for reporting mapping errors - Fixes for memory allocation errors - Improve warning message when locks are lost - Update documentation for the nfs4_unique_id parameter - Add an explanation of NFSv4 client identifiers - Ensure the i_size attribute is written to the fscache storage - Fix freeing uninitialized nfs4_labels - Better handling when xprtrdma bc_serv is NULL - Mark qualified async operations as MOVEABLE tasks" * tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.1 mark qualified async operations as MOVEABLE tasks xprtrdma: treat all calls not a bcall when bc_serv is NULL NFSv4: Fix free of uninitialized nfs4_label on referral lookup. NFS: Pass i_size to fscache_unuse_cookie() when a file is released Documentation: Add an explanation of NFSv4 client identifiers NFS: update documentation for the nfs4_unique_id parameter NFS: Improve warning message when locks are lost. NFSv4.1: Enable access to the NFSv4.1 'dacl' and 'sacl' attributes NFSv4: Add encoders/decoders for the NFSv4.1 dacl and sacl attributes NFSv4: Specify the type of ACL to cache NFSv4: Don't hold the layoutget locks across multiple RPC calls pNFS/files: Fall back to I/O through the MDS on non-fatal layout errors NFS: Further fixes to the writeback error handling NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout NFS: Memory allocation failures are not server fatal errors NFS: Don't report errors from nfs_pageio_complete() more than once NFS: Do not report flush errors in nfs_write_end() NFS: Don't report ENOSPC write errors twice NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS NFS: Do not report EINTR/ERESTARTSYS as mapping errors |
||
|
Linus Torvalds
|
1ff7bc3ba7 |
More power management updates for 5.19-rc1
- Add Tegra234 cpufreq support (Sumit Gupta).
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang).
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois).
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada).
- Add power sequences support to the system reboot and power off
code and make related platform-specific changes for multiple
platforms (Dmitry Osipenko, Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=PAh+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
|
||
|
Linus Torvalds
|
76bfd3de34 |
tracing updates for 5.19:
- The majority of the changes are for fixes and clean ups.
Noticeable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to having it
embedded in initram). This is useful for embedded boards without initram
disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use more than
59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset>
instead of using the name of the function before it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYpOgXRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjkKAQDbpemxvpFyJlZqT8KgEIXubu+ag2/q
p0XDHaPS0zF9OQEAjTxg6GMEbnFYl6fzxZtOoEbiaQ7ppfdhRI8t6sSMVA8=
=+nDD
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
|
||
|
Linus Torvalds
|
3cc30140db |
pci-v5.19-changes
-----BEGIN PGP SIGNATURE-----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=hEti
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert
|
||
|
Linus Torvalds
|
98931dd95f |
Yang Shi has improved the behaviour of khugepaged collapsing of readonly
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
||
|
Linus Torvalds
|
7e062cda7d |
Networking changes for 5.19.
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
||
|
Linus Torvalds
|
88a618920e |
It was a moderately busy cycle for documentation; highlights include:
- After a long period of inactivity, the Japanese translations are seeing
some much-needed maintenance and updating.
- Reworked IOMMU documentation
- Some new documentation for static-analysis tools
- A new overall structure for the memory-management documentation. This
is an LSFMM outcome that, it is hoped, will help encourage developers to
fill in the many gaps. Optimism is eternal...but hopefully it will
work.
- More Chinese translations.
Plus the usual typo fixes, updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmKLqZQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YdgQH/2/9+EgQDes93f/+iKtbO23EV67392dwrmXS
kYg8lR4948/Q3jzgMloUo6hNOoxXeV/sqmdHu0LjUhFN+BGsp9fFjd/jp0XhWcqA
nnc9foGbpmeFPxHeAg2aqV84eeasLoO5lUUm2rNoPBLd6HFV+IYC5R4VZ+w42StB
5bYEOYwHXMvQZXkivZDse82YmvQK3/2rRGTUoFhME/Aap6rFgWJJ+XQcSKA7WmwW
OpJqq+FOsjsxHe6IFVy6onzlqgGJM8zM2bLtqedid6yaE3uACcHMb/OyAjp0rdKF
BQvaG+d3f7DugABqM6Y1oU75iBtJWWYgGeAm36JtX+3mz2uR/f0=
=3UoR
-----END PGP SIGNATURE-----
Merge tag 'docs-5.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It was a moderately busy cycle for documentation; highlights include:
- After a long period of inactivity, the Japanese translations are
seeing some much-needed maintenance and updating.
- Reworked IOMMU documentation
- Some new documentation for static-analysis tools
- A new overall structure for the memory-management documentation.
This is an LSFMM outcome that, it is hoped, will help encourage
developers to fill in the many gaps. Optimism is eternal...but
hopefully it will work.
- More Chinese translations.
Plus the usual typo fixes, updates, etc"
* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
docs: pdfdocs: Add space for chapter counts >= 100 in TOC
docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
input: Docs: correct ntrig.rst typo
input: Docs: correct atarikbd.rst typos
MAINTAINERS: Become the docs/zh_CN maintainer
docs/zh_CN: fix devicetree usage-model translation
mm,doc: Add new documentation structure
Documentation: drop more IDE boot options and ide-cd.rst
Documentation/process: use scripts/get_maintainer.pl on patches
MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
docs/trans/ja_JP/howto: Don't mention specific kernel versions
docs/ja_JP/SubmittingPatches: Request summaries for commit references
docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
docs/ja_JP/SubmittingPatches: Randy has moved
docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
docs/ja_JP/SubmittingPatches: Update GregKH links
Documentation/sysctl: document max_rcu_stall_to_panic
Documentation: add missing angle bracket in cgroup-v2 doc
Documentation: dev-tools: use literal block instead of code-block
docs/zh_CN: add vm numa translation
...
|
||
Srinivas Pandruvada
|
4fe4f15523 |
Documentation: admin-guide: PM: Add Out of Band mode
Update documentation for using the tool to support performance level change via OOB (Out of Band) interface. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
827060261c |
media updates for v5.19-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmKLMPAACgkQCF8+vY7k 4RVupA//Q4U2BV3xKn9H3g/+dbSIbm0YEeWc2xMd3wbDnqokXsKxOuIfG1omIxCf hfhfnEfhRo0WHc5AGaHtbodCU3HcCrNdjH59r6nwedQg3qgFwMT4FYDNW33E8PN1 dj293GEUZ+BZGDoCatGOxlHi/I2/HcS3I6BiU/GlglALgM/8KaBvdMhY8S6lEXIK SqdiDDOsXVT+v1BB2PSSaRWU3KIccLzS2QlXQRTs2xKszXuQy6wT6IK//YqvFxQp PS9uziJhJNk2nIlZqE8U46iYv9v+HnTW/5cLrUDTj0VIxjWHgMSnpbubOABgBRYj gX1wXRqe/bx9frm1ksfBUyNmEmxF3LL2h6fnkc2RQh/T/DKwMFpE9u3P8aEIPtmk djACoQbdjJXKtez1Uw5KT1nH8EKfgeA5z/PkFw+zYMiXtNdhIgxFBg38veI+/jsB w8nUPydFWy/EpmgTbQTmvbF9c+LczqUgaMSbXKzLByVfxie/SsE/JRyLXQITByVT QmmZ3WTKjTJYa1gEz2lvIafhTxXWu7mnBo7ma1wSXVPSkwOr2m73aIfxf1h1vr/N +/sCOEeQiVT67arKbdlmf7IDvNzcRmnBTdSE//VkJGonaBAjrpUuRD4Yq61YCVon DqVh29LGeFDmkRkcvfZVT2Si/UwDAYhHa8yb0lPZpVXhKbCxLUQ= =HllR -----END PGP SIGNATURE----- Merge tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - dvb-usb drivers entries got reworked to avoid usage of magic numbers to refer to data position inside tables - vcodec driver has gained support for MT8186 and for vp8 and vp9 stateless codecs - hantro has gained support for Hantro G1 on RK366x - Added more h264 levels on coda960 - ccs gained support for MIPI CSI-2 28 bits per pixel raw data type - venus driver gained support for Qualcomm custom compressed pixel formats - lots of driver fixes and updates * tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: hantro: Enable HOLD_CAPTURE_BUF for H.264 media: hantro: Add H.264 field decoding support media: hantro: h264: Make dpb entry management more robust media: hantro: Stop using H.264 parameter pic_num media: rkvdec: Enable capture buffer holding for H264 media: rkvdec-h264: Add field decoding support media: rkvdec: Ensure decoded resolution fit coded resolution media: rkvdec: h264: Fix reference frame_num wrap for second field media: rkvdec: h264: Validate and use pic width and height in mbs media: rkvdec: Move H264 SPS validation in rkvdec-h264 media: rkvdec: h264: Fix bit depth wrap in pps packet media: rkvdec: h264: Fix dpb_valid implementation media: rkvdec: Stop overclocking the decoder media: v4l2: Reorder field reflist media: h264: Sort p/b reflist using frame_num media: v4l2: Trace calculated p/b0/b1 initial reflist media: h264: Store all fields into the unordered list media: h264: Store current picture fields media: h264: Increase reference lists size to 32 media: h264: Use v4l2_h264_reference for reflist ... |
||
|
Linus Torvalds
|
0350785b0a |
integrity-v5.19
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYo0tOhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QJfAP47Ym9vacLc1m8/MUaRA/QjbJ/8t3TX
h/4McK8kiRudxgD/RiPHII6gJ8q+qpBrYWJZ4ZZaHE8v0oA1viuZfbuN2wc=
=KQYi
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for including fs-verity file digests and signatures
in the IMA measurement list as well as verifying the fs-verity file
digest based signatures, both based on policy.
In addition, are two bug fixes:
- avoid reading UEFI variables, which cause a page fault, on Apple
Macs with T2 chips.
- remove the original "ima" template Kconfig option to address a boot
command line ordering issue.
The rest is a mixture of code/documentation cleanup"
* tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Fix sparse warnings in keyring_handler
evm: Clean up some variables
evm: Return INTEGRITY_PASS for enum integrity_status value '0'
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fsverity: update the documentation
ima: support fs-verity file digest based version 3 signatures
ima: permit fsverity's file digests in the IMA measurement list
ima: define a new template field named 'd-ngv2' and templates
fs-verity: define a function to return the integrity protected file digest
ima: use IMA default hash algorithm for integrity violations
ima: fix 'd-ng' comments and documentation
ima: remove the IMA_TEMPLATE Kconfig option
ima: remove redundant initialization of pointer 'file'.
|
||
|
Linus Torvalds
|
7cf6a8a17f |
tpmdd updates for v5.19-rc1
- Strictened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An invalid hash format causes a compilation error. Previously, they got included to the kernel binary but were silently ignored at run-time. - Allow root user to append new hashes to the blacklist keyring. - Trusted keys backed with Cryptographic Acceleration and Assurance Module (CAAM), which part of some of the new NXP's SoC's. Now there is total three hardware backends for trusted keys: TPM, ARM TEE and CAAM. - A scattered set of fixes and small improvements for the TPM driver. Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> -----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYoux6xIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9LTQgEA4zRrlmLPjhZ1iZpPZiyBBv5eOx20/c+y R7tCfJFB2+ABAOT1E885vt+GgKTY4mYloHJ+ZtnTIf1QRMP6EoSX+TwP =oBOO -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: - Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An invalid hash format causes a compilation error. Previously, they got included to the kernel binary but were silently ignored at run-time. - Allow root user to append new hashes to the blacklist keyring. - Trusted keys backed with Cryptographic Acceleration and Assurance Module (CAAM), which part of some of the new NXP's SoC's. Now there is total three hardware backends for trusted keys: TPM, ARM TEE and CAAM. - A scattered set of fixes and small improvements for the TPM driver. * tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: MAINTAINERS: add KEYS-TRUSTED-CAAM doc: trusted-encrypted: describe new CAAM trust source KEYS: trusted: Introduce support for NXP CAAM-based trusted keys crypto: caam - add in-kernel interface for blob generator crypto: caam - determine whether CAAM supports blob encap/decap KEYS: trusted: allow use of kernel RNG for key material KEYS: trusted: allow use of TEE as backend without TCG_TPM support tpm: Add field upgrade mode support for Infineon TPM2 modules tpm: Fix buffer access in tpm2_get_tpm_pt() char: tpm: cr50_i2c: Suppress duplicated error message in .remove() tpm: cr50: Add new device/vendor ID 0x504a6666 tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe() tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions certs: Explain the rationale to call panic() certs: Allow root user to append signed hashes to the blacklist keyring certs: Check that builtin blacklist hashes are valid certs: Make blacklist_vet_description() more strict certs: Factor out the blacklist hash creation tools/certs: Add print-cert-tbs-hash.sh |
||
|
Linus Torvalds
|
ac2ab99072 |
Random number generator updates for Linux 5.19-rc1.
-----BEGIN PGP SIGNATURE-----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=SUr3
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
|
||
|
Jakub Kicinski
|
677fb75253 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/cadence/macb_main.c |
||
|
Linus Torvalds
|
143a6252e1 |
arm64 updates for 5.19:
- Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmKH19IACgkQa9axLQDI XvEFWg//bf0p6zjeNaOJmBbyVFsXsVyYiEaLUpFPUs3oB+81s2YZ+9i1rgMrNCft EIDQ9+/HgScKxJxnzWf68heMdcBDbk76VJtLALExbge6owFsjByQDyfb/b3v/bLd ezAcGzc6G5/FlI1IP7ct4Z9MnQry4v5AG8lMNAHjnf6GlBS/tYNAqpmj8HpQfgRQ ZbhfZ8Ayu3TRSLWL39NHVevpmxQm/bGcpP3Q9TtjUqg0r1FQ5sK/LCqOksueIAzT UOgUVYWSFwTpLEqbYitVqgERQp9LiLoK5RmNYCIEydfGM7+qmgoxofSq5e2hQtH2 SZM1XilzsZctRbBbhMit1qDBqMlr/XAy/R5FO0GauETVKTaBhgtj6mZGyeC9nU/+ RGDljaArbrOzRwMtSuXF+Fp6uVo5spyRn1m8UT/k19lUTdrV9z6EX5Fzuc4Mnhed oz4iokbl/n8pDObXKauQspPA46QpxUYhrAs10B/ELc3yyp/Qj3jOfzYHKDNFCUOq HC9mU+YiO9g2TbYgCrrFM6Dah2E8fU6/cR0ZPMeMgWK4tKa+6JMEINYEwak9e7M+ 8lZnvu3ntxiJLN+PrPkiPyG+XBh2sux1UfvNQ+nw4Oi9xaydeX7PCbQVWmzTFmHD q7UPQ8220e2JNCha9pULS8cxDLxiSksce06DQrGXwnHc1Ir7T04= =0DjE -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits) arm64/sysreg: Generate definitions for FAR_ELx arm64/sysreg: Generate definitions for DACR32_EL2 arm64/sysreg: Generate definitions for CSSELR_EL1 arm64/sysreg: Generate definitions for CPACR_ELx arm64/sysreg: Generate definitions for CONTEXTIDR_ELx arm64/sysreg: Generate definitions for CLIDR_EL1 arm64/sve: Move sve_free() into SVE code section arm64: Kconfig.platforms: Add comments arm64: Kconfig: Fix indentation and add comments arm64: mm: avoid writable executable mappings in kexec/hibernate code arm64: lds: move special code sections out of kernel exec segment arm64/hugetlb: Implement arm64 specific huge_ptep_get() arm64/hugetlb: Use ptep_get() to get the pte value of a huge page arm64: kdump: Do not allocate crash low memory if not needed arm64/sve: Generate ZCR definitions arm64/sme: Generate defintions for SVCR arm64/sme: Generate SMPRI_EL1 definitions arm64/sme: Automatically generate SMPRIMAP_EL2 definitions arm64/sme: Automatically generate SMIDR_EL1 defines arm64/sme: Automatically generate defines for SMCR ... |
||
|
Linus Torvalds
|
a13dc4d409 |
- Serious sanitization and cleanup of the whole APERF/MPERF and
frequency invariance code along with removing the need for unnecessary IPIs - Finally remove a.out support - The usual trivial cleanups and fixes all over x86 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLn48ACgkQEsHwGGHe VUpbkg/+PELrc0y/qxLM/+dyftKYY16Rhk6ZVAXfwqlh5ldyVQcLMUgKwDqYyTn2 XmgdI3cTcFlH2K7j6ANWLu0I9NPaviimUcEdMVcXt7aY5mGWk/q4hIyCYM8d41sV qKx4OjNSdyoofG6MtwFLJDuoeVg99Bqgvm4nP9BuxL0dZJ2hfcUZ7MTxYCx9ZYjK /3trx0NV287Yg/wm91EU0nLQzy9xbGS7WCmMnse6uxiUdm2vXbBt8oNFF4f747Dj 0cArfNrMgYq4Cv5bgt/Ki0NU/n4EOGDpJUSyQwlnjDKeN81ESPy7IWtTQ6cE/rJK BZeUIPiGiYHwtqXv0UTAPGLG8cAqKeab8u0xAOyrFVDkTc0+WlPJRsUAOmRRGIGE M8ZjoxrLeuFgxw6vKpVjaA+mDRj3qEpSH+IrTcekS98PN7gmVzvq03GobgGbT7YB xmtbThJa+514FfUVckkyC0+A56BknUIgVxwFPqrthE2atzYTbH67hW4U0yVWXXr7 2VI7ttozBrYVgHCWhD9eoT0uhyD74Vl6pqHnqzY9ShIfKVUGvMgKHHg04nLLtF7W hm87xV3Q5UEmXhTmDzT1rUZ99mBUxGbWxk227I9raMugIh7pp9wIr57+7O0LRYfX TdnE2+tL8RMi7+XzRH5iLhnwkrvahBESeHSQ7GVI1Y2zMmmFN+0= =Dks/ -----END PGP SIGNATURE----- Merge tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: - Serious sanitization and cleanup of the whole APERF/MPERF and frequency invariance code along with removing the need for unnecessary IPIs - Finally remove a.out support - The usual trivial cleanups and fixes all over x86 * tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86: Remove empty files x86/speculation: Add missing srbds=off to the mitigations= help text x86/prctl: Remove pointless task argument x86/aperfperf: Make it correct on 32bit and UP kernels x86/aperfmperf: Integrate the fallback code from show_cpuinfo() x86/aperfmperf: Replace arch_freq_get_on_cpu() x86/aperfmperf: Replace aperfmperf_get_khz() x86/aperfmperf: Store aperf/mperf data for cpu frequency reads x86/aperfmperf: Make parts of the frequency invariance code unconditional x86/aperfmperf: Restructure arch_scale_freq_tick() x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct x86/aperfmperf: Untangle Intel and AMD frequency invariance init x86/aperfmperf: Separate AP/BP frequency invariance init x86/smp: Move APERF/MPERF code where it belongs x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu() x86/process: Fix kernel-doc warning due to a changed function name x86: Remove a.out support x86/mm: Replace nodes_weight() with nodes_empty() where appropriate x86: Replace cpumask_weight() with cpumask_empty() where appropriate x86/pkeys: Remove __arch_set_user_pkey_access() declaration ... |
||
|
Linus Torvalds
|
c5a3d3c01e |
- Remove a bunch of chicken bit options to turn off CPU features which
are not really needed anymore - Misc fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLdfgACgkQEsHwGGHe VUpB5Q//TIGVgmnSd0YYxY2cIe047lfcd34D+3oEGk0d2FidtirP/tjgBqIXRuY5 UncoveqBuI/6/7bodP/ANg9DNVXv2489eFYyZtEOLSGnfzV2AU10aw95cuQQG+BW YIc6bGSsgfiNo8Vtj4L3xkVqxOrqaCYnh74GTSNNANht3i8KH8Qq9n3qZTuMiF6R fH9xWak3TZB2nMzHdYrXh0sSR6eBHN3KYSiT0DsdlU9PUlavlSPFYQRiAlr6FL6J BuYQdlUaCQbINvaviGW4SG7fhX32RfF/GUNaBajB40TO6H98KZLpBBvstWQ841xd /o44o5wbghoGP1ne8OKwP+SaAV2bE6twd5eO1lpwcpXnQfATvjQ2imxvOiRhy5LY pFPt/hko9gKWJ6SI0SQ4tiKJALFPLWD6561scHU6PoriFhv0SRIaPmJyEsDYynMz bCXaPPsoovRwwwBfAxxQjljIlhQSBVt3gWZ8NWD1tYbNaqM+WK7xKBaONGh3OCw3 iK7lsbbljtM0zmANImYyeo7+Hr1NVOmMiK2WZYbxhxgzH3l8v/6EbDt3I70WU57V 9apCU3/nk/HFpX65SdW5qmuiWLVdH9NXrEqbvaUB4ApT18MdUUugewBhcGnf3Umu wEtltzziqcIkxzDoXXpBGWpX31S7PsM2XVDqYC7dwuNttgEw2Fc= =7AUX -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CPU feature updates from Borislav Petkov: - Remove a bunch of chicken bit options to turn off CPU features which are not really needed anymore - Misc fixes and cleanups * tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Add missing prototype for unpriv_ebpf_notify() x86/pm: Fix false positive kmemleak report in msr_build_context() x86/speculation/srbds: Do not try to turn mitigation off when not supported x86/cpu: Remove "noclflush" x86/cpu: Remove "noexec" x86/cpu: Remove "nosmep" x86/cpu: Remove CONFIG_X86_SMAP and "nosmap" x86/cpu: Remove "nosep" x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid= |
||
|
Linus Torvalds
|
eb39e37d5c |
AMD SEV-SNP support
Add to confidential guests the necessary memory integrity protection against malicious hypervisor-based attacks like data replay, memory remapping and others, thus achieving a stronger isolation from the hypervisor. At the core of the functionality is a new structure called a reverse map table (RMP) with which the guest has a say in which pages get assigned to it and gets notified when a page which it owns, gets accessed/modified under the covers so that the guest can take an appropriate action. In addition, add support for the whole machinery needed to launch a SNP guest, details of which is properly explained in each patch. And last but not least, the series refactors and improves parts of the previous SEV support so that the new code is accomodated properly and not just bolted on. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLU2AACgkQEsHwGGHe VUpb/Q//f4LGiJf4nw1flzpe90uIsHNwAafng3NOjeXmhI/EcOlqPf23WHPCgg3Z 2umfa4sRZyj4aZubDd7tYAoq4qWrQ7pO7viWCNTh0InxBAILOoMPMuq2jSAbq0zV ASUJXeQ2bqjYxX4JV4N5f3HT2l+k68M0mpGLN0H+O+LV9pFS7dz7Jnsg+gW4ZP25 PMPLf6FNzO/1tU1aoYu80YDP1ne4eReLrNzA7Y/rx+S2NAetNwPn21AALVgoD4Nu vFdKh4MHgtVbwaQuh0csb/+4vD+tDXAhc8lbIl+Abl9ZxJaDWtAJW5D9e2CnsHk1 NOkHwnrzizzhtGK1g56YPUVRFAWhZYMOI1hR0zGPLQaVqBnN4b+iahPeRiV0XnGE PSbIHSfJdeiCkvLMCdIAmpE5mRshhRSUfl1CXTCdetMn8xV/qz/vG6bXssf8yhTV cfLGPHU7gfVmsbR9nk5a8KZ78PaytxOxfIDXvCy8JfQwlIWtieaCcjncrj+sdMJy 0fdOuwvi4jma0cyYuPolKiS1Hn4ldeibvxXT7CZQlIx6jZShMbpfpTTJs11XdtHm PdDAc1TY3AqI33mpy9DhDQmx/+EhOGxY3HNLT7evRhv4CfdQeK3cPVUWgo4bGNVv ZnFz7nvmwpyufltW9K8mhEZV267174jXGl6/idxybnlVE7ESr2Y= =Y8kW -----END PGP SIGNATURE----- Merge tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull AMD SEV-SNP support from Borislav Petkov: "The third AMD confidential computing feature called Secure Nested Paging. Add to confidential guests the necessary memory integrity protection against malicious hypervisor-based attacks like data replay, memory remapping and others, thus achieving a stronger isolation from the hypervisor. At the core of the functionality is a new structure called a reverse map table (RMP) with which the guest has a say in which pages get assigned to it and gets notified when a page which it owns, gets accessed/modified under the covers so that the guest can take an appropriate action. In addition, add support for the whole machinery needed to launch a SNP guest, details of which is properly explained in each patch. And last but not least, the series refactors and improves parts of the previous SEV support so that the new code is accomodated properly and not just bolted on" * tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) x86/entry: Fixup objtool/ibt validation x86/sev: Mark the code returning to user space as syscall gap x86/sev: Annotate stack change in the #VC handler x86/sev: Remove duplicated assignment to variable info x86/sev: Fix address space sparse warning x86/sev: Get the AP jump table address from secrets page x86/sev: Add missing __init annotations to SEV init routines virt: sevguest: Rename the sevguest dir and files to sev-guest virt: sevguest: Change driver name to reflect generic SEV support x86/boot: Put globals that are accessed early into the .data section x86/boot: Add an efi.h header for the decompressor virt: sevguest: Fix bool function returning negative value virt: sevguest: Fix return value check in alloc_shared_pages() x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate() virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement virt: sevguest: Add support to get extended report virt: sevguest: Add support to derive key virt: Add SEV-SNP guest driver x86/sev: Register SEV-SNP guest request platform device x86/sev: Provide support for SNP guest request NAEs ... |
||
|
Linus Torvalds
|
8a32f81a89 |
ata changes for 5.19-rc1
For this cycle, the libata.force kernel parameter changes stand out.
Beside that, some small cleanups in various drivers. In more details:
* Changes to the pata_mpc52xx driver in preparation for powerpc's
asm/prom.h cleanup, from Christophe.
* Improved ATA command allocation, from John.
* Various small cleanups to the pata_via, pata_sil680, pata_ftide010,
sata_gemini, ahci_brcm drivers and to libata-core, from Sergey, Diego,
Ruyi, Mighao and Jiabing.
* Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad.
* AHCI RAID ID cleanup, from Dan.
* Improvement to the libata.force kernel parameter to allow most horkage
flags to be manually forced for debugging drive issues in the field
without needing recompiling a kernel, from me.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYosMtQAKCRDdoc3SxdoY
dhi6APsGXkkiaTheBeshjhPZiet80iEh4gJknp5QwgJ6QovjDwEAzjApUC0S1sq2
atD4Y7T6HnKQBp66lJHvvgbFuHlxMgg=
=YuEq
-----END PGP SIGNATURE-----
Merge tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"For this cycle, the libata.force kernel parameter changes stand out.
Beside that, some small cleanups in various drivers. In more detail:
- Changes to the pata_mpc52xx driver in preparation for powerpc's
asm/prom.h cleanup, from Christophe.
- Improved ATA command allocation, from John.
- Various small cleanups to the pata_via, pata_sil680, pata_ftide010,
sata_gemini, ahci_brcm drivers and to libata-core, from Sergey,
Diego, Ruyi, Mighao and Jiabing.
- Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad.
- AHCI RAID ID cleanup, from Dan.
- Improvement to the libata.force kernel parameter to allow most
horkage flags to be manually forced for debugging drive issues in
the field without needing recompiling a kernel, from me"
* tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_ftide010: Remove unneeded ERROR check before clk_disable_unprepare
doc: admin-guide: Update libata kernel parameters
ata: libata-core: Allow forcing most horkage flags
ata: libata-core: Improve link flags forced settings
ata: libata-core: Refactor force_tbl definition
ata: libata-core: cleanup ata_device_blacklist
ata: simplify the return expression of brcm_ahci_remove
ata: Make use of the helper function devm_platform_ioremap_resource()
ata: libata-core: replace "its" with "it is"
ahci: Add a generic 'controller2' RAID id
dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support
ata: pata_via: fix sloppy typing in via_do_set_mode()
ata: pata_sil680: fix result type of sil680_sel{dev|reg}()
ata: libata-core: fix parameter type in ata_xfer_mode2shift()
libata: Improve ATA queued command allocation
ata: pata_mpc52xx: Prepare cleanup of powerpc's asm/prom.h
|
||
Ahmad Fatoum
|
e9c5048c2d |
KEYS: trusted: Introduce support for NXP CAAM-based trusted keys
The Cryptographic Acceleration and Assurance Module (CAAM) is an IP core built into many newer i.MX and QorIQ SoCs by NXP. The CAAM does crypto acceleration, hardware number generation and has a blob mechanism for encapsulation/decapsulation of sensitive material. This blob mechanism depends on a device specific random 256-bit One Time Programmable Master Key that is fused in each SoC at manufacturing time. This key is unreadable and can only be used by the CAAM for AES encryption/decryption of user data. This makes it a suitable backend (source) for kernel trusted keys. Previous commits generalized trusted keys to support multiple backends and added an API to access the CAAM blob mechanism. Based on these, provide the necessary glue to use the CAAM for trusted keys. Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Ahmad Fatoum
|
fcd7c26901 |
KEYS: trusted: allow use of kernel RNG for key material
The two existing trusted key sources don't make use of the kernel RNG, but instead let the hardware doing the sealing/unsealing also generate the random key material. However, both users and future backends may want to place less trust into the quality of the trust source's random number generator and instead reuse the kernel entropy pool, which can be seeded from multiple entropy sources. Make this possible by adding a new trusted.rng parameter, that will force use of the kernel RNG. In its absence, it's up to the trust source to decide, which random numbers to use, maintaining the existing behavior. Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Pawan Gupta
|
8cb861e9e3 |
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst.
These vulnerabilities are broadly categorized as:
Device Register Partial Write (DRPW):
Some endpoint MMIO registers incorrectly handle writes that are
smaller than the register size. Instead of aborting the write or only
copying the correct subset of bytes (for example, 2 bytes for a 2-byte
write), more bytes than specified by the write transaction may be
written to the register. On some processors, this may expose stale
data from the fill buffers of the core that created the write
transaction.
Shared Buffers Data Sampling (SBDS):
After propagators may have moved data around the uncore and copied
stale data into client core fill buffers, processors affected by MFBDS
can leak data from the fill buffer.
Shared Buffers Data Read (SBDR):
It is similar to Shared Buffer Data Sampling (SBDS) except that the
data is directly read into the architectural software-visible state.
An attacker can use these vulnerabilities to extract data from CPU fill
buffers using MDS and TAA methods. Mitigate it by clearing the CPU fill
buffers using the VERW instruction before returning to a user or a
guest.
On CPUs not affected by MDS and TAA, user application cannot sample data
from CPU fill buffers using MDS or TAA. A guest with MMIO access can
still use DRPW or SBDR to extract data architecturally. Mitigate it with
VERW instruction to clear fill buffers before VMENTER for MMIO capable
guests.
Add a kernel parameter mmio_stale_data={off|full|full,nosmt} to control
the mitigation.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
||
|
Pawan Gupta
|
4419470191 |
Documentation: Add documentation for Processor MMIO Stale Data
Add the admin guide for Processor MMIO stale data vulnerabilities. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> |
||
Xin Long
|
582a2dbc72 |
Documentation: add description for net.core.gro_normal_batch
Describe it in admin-guide/sysctl/net.rst like other Network core options.
Users need to know gro_normal_batch for performance tuning.
Fixes:
|
||
Johannes Weiner
|
f4840ccfca |
zswap: memcg accounting
Applications can currently escape their cgroup memory containment when zswap is enabled. This patch adds per-cgroup tracking and limiting of zswap backend memory to rectify this. The existing cgroup2 memory.stat file is extended to show zswap statistics analogous to what's in meminfo and vmstat. Furthermore, two new control files, memory.zswap.current and memory.zswap.max, are added to allow tuning zswap usage on a per-workload basis. This is important since not all workloads benefit from zswap equally; some even suffer compared to disk swap when memory contents don't compress well. The optimal size of the zswap pool, and the threshold for writeback, also depends on the size of the workload's warm set. The implementation doesn't use a traditional page_counter transaction. zswap is unconventional as a memory consumer in that we only know the amount of memory to charge once expensive compression has occurred. If zwap is disabled or the limit is already exceeded we obviously don't want to compress page upon page only to reject them all. Instead, the limit is checked against current usage, then we compress and charge. This allows some limit overrun, but not enough to matter in practice. [hannes@cmpxchg.org: fix for CONFIG_SLOB builds] Link: https://lkml.kernel.org/r/YnwD14zxYjUJPc2w@cmpxchg.org [hannes@cmpxchg.org: opt out of cgroups v1] Link: https://lkml.kernel.org/r/Yn6it9mBYFA+/lTb@cmpxchg.org Link: https://lkml.kernel.org/r/20220510152847.230957-7-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Hans de Goede
|
fa6dae5d82 |
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
Some firmware supplies PCI host bridge _CRS that includes address space unusable by PCI devices, e.g., space occupied by host bridge registers or used by hidden PCI devices. To avoid this unusable space, Linux currently excludes E820 reserved regions from _CRS windows; see |
||
|
Saravana Kannan
|
2b28a1a84a |
driver core: Extend deferred probe timeout on driver registration
The deferred probe timer that's used for this currently starts at late_initcall and runs for driver_deferred_probe_timeout seconds. The assumption being that all available drivers would be loaded and registered before the timer expires. This means, the driver_deferred_probe_timeout has to be pretty large for it to cover the worst case. But if we set the default value for it to cover the worst case, it would significantly slow down the average case. For this reason, the default value is set to 0. Also, with CONFIG_MODULES=y and the current default values of driver_deferred_probe_timeout=0 and fw_devlink=on, devices with missing drivers will cause their consumer devices to always defer their probes. This is because device links created by fw_devlink defer the probe even before the consumer driver's probe() is called. Instead of a fixed timeout, if we extend an unexpired deferred probe timer on every successful driver registration, with the expectation more modules would be loaded in the near future, then the default value of driver_deferred_probe_timeout only needs to be as long as the worst case time difference between two consecutive module loads. So let's implement that and set the default value to 10 seconds when CONFIG_MODULES=y. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: linux-gpio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220429220933.1350374-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
f79f662e4c |
driver core: Add "*" wildcard support to driver_async_probe cmdline param
There's currently no way to use driver_async_probe kernel cmdline param to enable default async probe for all drivers. So, add support for "*" to match with all driver names. When "*" is used, all other drivers listed in driver_async_probe are drivers that will NOT match the "*". For example: * driver_async_probe=drvA,drvB,drvC drvA, drvB and drvC do asynchronous probing. * driver_async_probe=* All drivers do asynchronous probing except those that have set PROBE_FORCE_SYNCHRONOUS flag. * driver_async_probe=*,drvA,drvB,drvC All drivers do asynchronous probing except drvA, drvB, drvC and those that have set PROBE_FORCE_SYNCHRONOUS flag. Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220504005344.117803-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
NeilBrown
|
5e12f172db |
NFS: update documentation for the nfs4_unique_id parameter
The documentation for nfs4_unique_id is out-of-date. In particular it
claim that when nfs4_unique_id is set, the host name is not used. since
Commit
|
||
Zhen Lei
|
8f0f104e2a |
arm64: kdump: Do not allocate crash low memory if not needed
When "crashkernel=X,high" is specified, the specified "crashkernel=Y,low" memory is not required in the following corner cases: 1. If both CONFIG_ZONE_DMA and CONFIG_ZONE_DMA32 are disabled, it means that the devices can access any memory. 2. If the system memory is small, the crash high memory may be allocated from the DMA zones. If that happens, there's no need to allocate another crash low memory because there's already one. Add condition '(crash_base >= CRASH_ADDR_LOW_MAX)' to determine whether the 'high' memory is allocated above DMA zones. Note: when both CONFIG_ZONE_DMA and CONFIG_ZONE_DMA32 are disabled, the entire physical memory is DMA accessible, CRASH_ADDR_LOW_MAX equals 'PHYS_MASK + 1'. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220511032033.426-1-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
Eric Dumazet
|
39564c3fdc |
net: add skb_defer_max sysctl
commit
|
||
Ganesan Rajagopal
|
8e20d4b332 |
mm/memcontrol: export memcg->watermark via sysfs for v2 memcg
We run a lot of automated tests when building our software and run into OOM scenarios when the tests run unbounded. v1 memcg exports memcg->watermark as "memory.max_usage_in_bytes" in sysfs. We use this metric to heuristically limit the number of tests that can run in parallel based on per test historical data. This metric is currently not exported for v2 memcg and there is no other easy way of getting this information. getrusage() syscall returns "ru_maxrss" which can be used as an approximation but that's the max RSS of a single child process across all children instead of the aggregated max for all child processes. The only work around is to periodically poll "memory.current" but that's not practical for short-lived one-off cgroups. Hence, expose memcg->watermark as "memory.peak" for v2 memcg. Link: https://lkml.kernel.org/r/20220507050916.GA13577@us192.sjc.aristanetworks.com Signed-off-by: Ganesan Rajagopal <rganesan@arista.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Muchun Song
|
78f39084b4 |
mm: hugetlb_vmemmap: add hugetlb_optimize_vmemmap sysctl
We must add hugetlb_free_vmemmap=on (or "off") to the boot cmdline and
reboot the server to enable or disable the feature of optimizing vmemmap
pages associated with HugeTLB pages. However, rebooting usually takes a
long time. So add a sysctl to enable or disable the feature at runtime
without rebooting. Why we need this? There are 3 use cases.
1) The feature of minimizing overhead of struct page associated with
each HugeTLB is disabled by default without passing
"hugetlb_free_vmemmap=on" to the boot cmdline. When we (ByteDance)
deliver the servers to the users who want to enable this feature, they
have to configure the grub (change boot cmdline) and reboot the
servers, whereas rebooting usually takes a long time (we have thousands
of servers). It's a very bad experience for the users. So we need a
approach to enable this feature after rebooting. This is a use case in
our practical environment.
2) Some use cases are that HugeTLB pages are allocated 'on the fly'
instead of being pulled from the HugeTLB pool, those workloads would be
affected with this feature enabled. Those workloads could be
identified by the characteristics of they never explicitly allocating
huge pages with 'nr_hugepages' but only set 'nr_overcommit_hugepages'
and then let the pages be allocated from the buddy allocator at fault
time. We can confirm it is a real use case from the commit
|
||
|
Muchun Song
|
9c54c522bb |
mm: hugetlb_vmemmap: use kstrtobool for hugetlb_vmemmap param parsing
Use kstrtobool rather than open coding "on" and "off" parsing in mm/hugetlb_vmemmap.c, which is more powerful to handle all kinds of parameters like 'Yy1Nn0' or [oO][NnFf] for "on" and "off". Link: https://lkml.kernel.org/r/20220512041142.39501-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Jason A. Donenfeld
|
069c4ea687 |
random: fix sysctl documentation nits
A semicolon was missing, and the almost-alphabetical-but-not ordering was confusing, so regroup these by category instead. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
SeongJae Park
|
81a84182c3 |
Docs/admin-guide/mm/damon/reclaim: document 'commit_inputs' parameter
This commit documents the new DAMON_RECLAIM parameter, 'commit_inputs' in its usage document. Link: https://lkml.kernel.org/r/20220429160606.127307-15-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
adc286e6bd |
Docs/{ABI,admin-guide}/damon: Update for 'state' sysfs file input keyword, 'commit'
This commit documents the newly added 'state' sysfs file input keyword, 'commit', which allows online tuning of DAMON contexts. Link: https://lkml.kernel.org/r/20220429160606.127307-13-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
915418088c |
Docs/{ABI,admin-guide}/damon: update for fixed virtual address ranges monitoring
This commit documents the user space support of the newly added monitoring operations set for fixed virtual address ranges monitoring, namely 'fvaddr', on the ABI and usage documents for DAMON. Link: https://lkml.kernel.org/r/20220426231750.48822-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
2fe60ec99b |
Docs/{ABI,admin-guide}/damon: document 'avail_operations' sysfs file
This commit updates the DAMON ABI and usage documents for the new sysfs file, 'avail_operations'. Link: https://lkml.kernel.org/r/20220426203843.45238-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Xiao Yang
|
553b0cb30b |
x86/speculation: Add missing srbds=off to the mitigations= help text
The mitigations= cmdline option help text misses the srbds=off option. Add it. [ bp: Add a commit message. ] Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220513101637.216487-1-yangx.jy@fujitsu.com |
||
|
Paul E. McKenney
|
ce13389053 |
Merge branch 'exp.2022.05.11a' into HEAD
exp.2022.05.11a: Expedited-grace-period latency-reduction updates. |
||
Uladzislau Rezki
|
28b3ae4265 |
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
Currently both expedited and regular grace period stall warnings use a single timeout value that with units of seconds. However, recent Android use cases problem require a sub-100-millisecond expedited RCU CPU stall warning. Given that expedited RCU grace periods normally complete in far less than a single millisecond, especially for small systems, this is not unreasonable. Therefore introduce the CONFIG_RCU_EXP_CPU_STALL_TIMEOUT kernel configuration that defaults to 20 msec on Android and remains the same as that of the non-expedited stall warnings otherwise. It also can be changed in run-time via: /sys/.../parameters/rcu_exp_cpu_stall_timeout. [ paulmck: Default of zero to use CONFIG_RCU_STALL_TIMEOUT. ] Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Randy Dunlap
|
4a840d5fdc |
Documentation: drop more IDE boot options and ide-cd.rst
Drop ide-* command line options.
Drop cdrom/ide-cd.rst documentation.
Fixes:
|
||
Damien Le Moal
|
fa82cabb88 |
doc: admin-guide: Update libata kernel parameters
Cleanup the text text describing the libata.force boot parameter and update the list of the values to include all supported horkage and link flag that can be forced. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> |
||
|
Zhen Lei
|
5832f1ae50 |
docs: kdump: Update the crashkernel description for arm64
Now arm64 has added support for "crashkernel=X,high" and "crashkernel=Y,low". Unlike x86, crash low memory is not allocated if "crashkernel=Y,low" is not specified. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220506114402.365-7-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
Mimi Zohar
|
989dc72511 |
ima: define a new template field named 'd-ngv2' and templates
In preparation to differentiate between unsigned regular IMA file hashes and fs-verity's file digests in the IMA measurement list, define a new template field named 'd-ngv2'. Also define two new templates named 'ima-ngv2' and 'ima-sigv2', which include the new 'd-ngv2' field. Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Paul E. McKenney
|
be05ee5437 |
Merge branches 'docs.2022.04.20a', 'fixes.2022.04.20a', 'nocb.2022.04.11b', 'rcu-tasks.2022.04.11b', 'srcu.2022.05.03a', 'torture.2022.04.11b', 'torture-tasks.2022.04.20a' and 'torturescript.2022.04.20a' into HEAD
docs.2022.04.20a: Documentation updates. fixes.2022.04.20a: Miscellaneous fixes. nocb.2022.04.11b: Callback-offloading updates. rcu-tasks.2022.04.11b: RCU-tasks updates. srcu.2022.05.03a: Put SRCU on a memory diet. torture.2022.04.11b: Torture-test updates. torture-tasks.2022.04.20a: Avoid torture testing changing RCU configuration. torturescript.2022.04.20a: Torture-test scripting updates. |
||
|
Paul E. McKenney
|
a57ffb3c6b |
srcu: Automatically determine size-transition strategy at boot
This commit adds a srcutree.convert_to_big option of zero that causes SRCU to decide at boot whether to wait for contention (small systems) or immediately expand to large (large systems). A new srcutree.big_cpu_lim (defaulting to 128) defines how many CPUs constitute a large system. Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
Joel Savitz
|
81c653659d |
Documentation/sysctl: document max_rcu_stall_to_panic
commit
|
||
Shakeel Butt
|
94968384dd |
memcg: introduce per-memcg reclaim interface
This patch series adds a memory.reclaim proactive reclaim interface. The rationale behind the interface and how it works are in the first patch. This patch (of 4): Introduce a memcg interface to trigger memory reclaim on a memory cgroup. Use case: Proactive Reclaim --------------------------- A userspace proactive reclaimer can continuously probe the memcg to reclaim a small amount of memory. This gives more accurate and up-to-date workingset estimation as the LRUs are continuously sorted and can potentially provide more deterministic memory overcommit behavior. The memory overcommit controller can provide more proactive response to the changing behavior of the running applications instead of being reactive. A userspace reclaimer's purpose in this case is not a complete replacement for kswapd or direct reclaim, it is to proactively identify memory savings opportunities and reclaim some amount of cold pages set by the policy to free up the memory for more demanding jobs or scheduling new jobs. A user space proactive reclaimer is used in Google data centers. Additionally, Meta's TMO paper recently referenced a very similar interface used for user space proactive reclaim: https://dl.acm.org/doi/pdf/10.1145/3503222.3507731 Benefits of a user space reclaimer: ----------------------------------- 1) More flexible on who should be charged for the cpu of the memory reclaim. For proactive reclaim, it makes more sense to be centralized. 2) More flexible on dedicating the resources (like cpu). The memory overcommit controller can balance the cost between the cpu usage and the memory reclaimed. 3) Provides a way to the applications to keep their LRUs sorted, so, under memory pressure better reclaim candidates are selected. This also gives more accurate and uptodate notion of working set for an application. Why memory.high is not enough? ------------------------------ - memory.high can be used to trigger reclaim in a memcg and can potentially be used for proactive reclaim. However there is a big downside in using memory.high. It can potentially introduce high reclaim stalls in the target application as the allocations from the processes or the threads of the application can hit the temporary memory.high limit. - Userspace proactive reclaimers usually use feedback loops to decide how much memory to proactively reclaim from a workload. The metrics used for this are usually either refaults or PSI, and these metrics will become messy if the application gets throttled by hitting the high limit. - memory.high is a stateful interface, if the userspace proactive reclaimer crashes for any reason while triggering reclaim it can leave the application in a bad state. - If a workload is rapidly expanding, setting memory.high to proactively reclaim memory can result in actually reclaiming more memory than intended. The benefits of such interface and shortcomings of existing interface were further discussed in this RFC thread: https://lore.kernel.org/linux-mm/5df21376-7dd1-bf81-8414-32a73cea45dd@google.com/ Interface: ---------- Introducing a very simple memcg interface 'echo 10M > memory.reclaim' to trigger reclaim in the target memory cgroup. The interface is introduced as a nested-keyed file to allow for future optional arguments to be easily added to configure the behavior of reclaim. Possible Extensions: -------------------- - This interface can be extended with an additional parameter or flags to allow specifying one or more types of memory to reclaim from (e.g. file, anon, ..). - The interface can also be extended with a node mask to reclaim from specific nodes. This has use cases for reclaim-based demotion in memory tiering systens. - A similar per-node interface can also be added to support proactive reclaim and reclaim-based demotion in systems without memcg. - Add a timeout parameter to make it easier for user space to call the interface without worrying about being blocked for an undefined amount of time. For now, let's keep things simple by adding the basic functionality. [yosryahmed@google.com: worked on versions v2 onwards, refreshed to current master, updated commit message based on recent discussions and use cases] Link: https://lkml.kernel.org/r/20220425190040.2475377-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20220425190040.2475377-2-yosryahmed@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Co-developed-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Wei Xu <weixugc@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Brian Geffon
|
30226b69f8 |
zram: add a huge_idle writeback mode
Today it's only possible to write back as a page, idle, or huge. A user might want to writeback pages which are huge and idle first as these idle pages do not require decompression and make a good first pass for writeback. Idle writeback specifically has the advantage that a refault is unlikely given that the page has been swapped for some amount of time without being refaulted. Huge writeback has the advantage that you're guaranteed to get the maximum benefit from a single page writeback, that is, you're reclaiming one full page of memory. Pages which are compressed in zram being written back result in some benefit which is always less than a page size because of the fact that it was compressed. The primary use of this is for minimizing refaults in situations where the device has to be sensitive to storage endurance. On ChromeOS we have devices with slow eMMC and repeated writes and refaults can negatively affect performance and endurance. Link: https://lkml.kernel.org/r/20220322215821.1196994-1-bgeffon@google.com Signed-off-by: Brian Geffon <bgeffon@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Yang Yang
|
94bfe85bde |
mm/vmstat: add events for ksm cow
Users may use ksm by calling madvise(, , MADV_MERGEABLE) when they want to save memory, it's a tradeoff by suffering delay on ksm cow. Users can get to know how much memory ksm saved by reading /sys/kernel/mm/ksm/pages_sharing, but they don't know what's the costs of ksm cow, and this is important of some delay sensitive tasks. So add ksm cow events to help users evaluate whether or how to use ksm. Also update Documentation/admin-guide/mm/ksm.rst with new added events. Link: https://lkml.kernel.org/r/20220331035616.2390805-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: xu xin <xu.xin16@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Saravanan D <saravanand@fb.com> Cc: Minchan Kim <minchan@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Muchun Song
|
47010c040d |
mm: hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*
The word of "free" is not expressive enough to express the feature of optimizing vmemmap pages associated with each HugeTLB, rename this keywork to "optimize". In this patch , cheanup configs to make code more expressive. Link: https://lkml.kernel.org/r/20220404074652.68024-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Joel Savitz
|
8d98e42fb2 |
Documentation/sysctl: document page_lock_unfairness
commit
|
||
|
Joel Savitz
|
a477b94d65 |
Documentation: add missing angle bracket in cgroup-v2 doc
Trivial addition of missing closing angle backet. Signed-off-by: Joel Savitz <jsavitz@redhat.com> Link: https://lore.kernel.org/r/20220422164526.3464306-1-jsavitz@redhat.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Jakub Kicinski
|
89fbca3307 |
net: wan: remove support for COSA and SRP synchronous serial boards
Looks like all the changes to this driver had been automated churn since git era begun. The driver is using virt_to_bus() so it should be updated to a proper DMA API or removed. Given the latest "news" entry on the website is from 1999 I'm opting for the latter. I'm marking the allocated char device major number as [REMOVED], I reckon we can't reuse it in case some SW out there assumes its COSA? Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Masami Hiramatsu
|
2f51efc6b7 |
docs: bootconfig: Add how to embed the bootconfig into kernel
Add a description how to embed the bootconfig file into kernel. Link: https://lkml.kernel.org/r/164921228987.1090670.16843569536974147213.stgit@devnote2 Cc: Padmanabha Srinivasaiah <treasure4paddy@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Linux Kbuild mailing list <linux-kbuild@vger.kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Kwang Son
|
03b49ec871 |
media: docs: Fix vimc default pipeline graph
RGB/YUV Input is sensor type and it should be sub-dev node. To generate this dot graph sudo modprobe vimc media-ctl --print-dot Signed-off-by: Kwang Son <dev.kwang.son@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Paul E. McKenney
|
3791a22374 |
kernel/smp: Provide boot-time timeout for CSD lock diagnostics
Debugging of problems involving insanely long-running SMI handlers proceeds better if the CSD-lock timeout can be adjusted. This commit therefore provides a new smp.csd_lock_timeout kernel boot parameter that specifies the timeout in milliseconds. The default remains at the previously hard-coded value of five seconds. [ paulmck: Apply feedback from Juergen Gross. ] Cc: Rik van Riel <riel@surriel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Randy Dunlap
|
389cfd9670 |
docs/admin: alphabetize parts of kernel-parameters.txt (part 2)
Alphabetize several of the kernel boot parameters in kernel-parameters.txt. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Randy Dunlap
|
d2fc83c149 |
Docs/admin: alphabetize some kernel-parameters (part 1)
Move some out-of-place kernel parameters into their correct locations. Move one out-of-order keyword/legend in kernel-parameters.rst. Add some missing keyword legends in kernel-parameters.rst: HIBERNATION HYPER_V and drop some obsolete/removed keyword legends: EIDE IOSCHED OSS TS XT Correct the location of the setup.h file. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Randy Dunlap
|
59bdbbd5bc |
Docs: admin/kernel-parameters: edit a few boot options
Clean up some of admin-guide/kernel-parameters.txt: a. "smt" should be "smt=" (S390) b. (dropped) c. Sparc supports the vdso= boot option d. make the tp_printk options (2) formatting similar to other options by adding spacing e. add "trace_clock=" with a reference to Documentation/trace/ftrace.rst f. use [IA-64] as documented instead of [ia64] g. fix formatting and text for test_suspend= h. fix formatting for swapaccount= i. fix formatting and grammar for video.brightness_switch_enabled= Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-ia64@vger.kernel.org Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: linux-pm@vger.kernel.org Cc: linux-acpi@vger.kernel.org Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Akihiko Odaki
|
82850028aa |
x86/efi: Remove references of EFI earlyprintk from documentation
x86 EFI earlyprink was removed with commit
|
||
|
Paul E. McKenney
|
f25390033f |
rcu-tasks: Print pre-stall-warning informational messages
RCU-tasks stall-warning messages are printed after the grace period is ten minutes old. Unfortunately, most of us will have rebooted the system in response to an apparently-hung command long before the ten minutes is up, and will thus see what looks to be a silent hang. This commit therefore adds pr_info() messages that are printed earlier. These should avoid being classified as errors, but should give impatient users a hint. These are controlled by new rcupdate.rcu_task_stall_info and rcupdate.rcu_task_stall_info_mult kernel-boot parameters. The former defines the initial delay in jiffies (defaulting to 10 seconds) and the latter defines the multiplier (defaulting to 3). Thus, by default, the first message will appear 10 seconds into the RCU-tasks grace period, the second 40 seconds in, and the third 160 seconds in. There would be a fourth at 640 seconds in, but the stall warning message appears 600 seconds in, and once a stall warning is printed for a given grace period, no further informational messages are printed. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Paul E. McKenney
|
9f2e91d94c |
srcu: Add contention-triggered addition of srcu_node tree
This commit instruments the acquisitions of the srcu_struct structure's
->lock, enabling the initiation of a transition from SRCU_SIZE_SMALL
to SRCU_SIZE_BIG when sufficient contention is experienced. The
instrumentation counts the number of trylock failures within the confines
of a single jiffy. If that number exceeds the value specified by the
srcutree.small_contention_lim kernel boot parameter (which defaults to
100), and if the value specified by the srcutree.convert_to_big kernel
boot parameter has the 0x10 bit set (defaults to 0), then a transition
will be automatically initiated.
By default, there will never be any transitions, so that none of the
srcu_struct structures ever gains an srcu_node array.
The useful values for srcutree.convert_to_big are:
0x00: Never convert.
0x01: Always convert at init_srcu_struct() time.
0x02: Convert when rcutorture prints its first round of statistics.
0x03: Decide conversion approach at boot given system size.
0x10: Convert if contention is encountered.
0x12: Convert if contention is encountered or when rcutorture prints
its first round of statistics, whichever comes first.
The value 0x11 acts the same as 0x01 because the conversion happens
before there is any chance of contention.
[ paulmck: Apply "static" feedback from kernel test robot. ]
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
||
|
Paul E. McKenney
|
c69a00a12e |
srcu: Add boot-time control over srcu_node array allocation
This commit adds an srcu_tree.convert_to_big kernel parameter that either refuses to convert at all (0), converts immediately at init_srcu_struct() time (1), or lets rcutorture convert it (2). An addition contention-based dynamic conversion choice will be added, along with documentation. [ paulmck: Apply callback-scanning feedback from Neeraj Upadhyay. ] Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
Michael Roth
|
ba37a1438a |
x86/sev: Add a sev= cmdline option
For debugging purposes it is very useful to have a way to see the full contents of the SNP CPUID table provided to a guest. Add an sev=debug kernel command-line option to do so. Also introduce some infrastructure so that additional options can be specified via sev=option1[,option2] over time in a consistent manner. [ bp: Massage, simplify string parsing. ] Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220307213356.2797205-41-brijesh.singh@amd.com |
||
Borislav Petkov
|
f8858b5eff |
x86/cpu: Remove "noclflush"
Not really needed anymore and there's clearcpuid=. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220127115626.14179-7-bp@alien8.de |
||
|
Borislav Petkov
|
76ea0025a2 |
x86/cpu: Remove "noexec"
It doesn't make any sense to disable non-executable mappings - security-wise or else. So rip out that switch and move the remaining code into setup.c and delete setup_nx.c Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220127115626.14179-6-bp@alien8.de |
||
|
Borislav Petkov
|
385d2ae0a1 |
x86/cpu: Remove "nosmep"
There should be no need to disable SMEP anymore. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220127115626.14179-5-bp@alien8.de |
||
|
Borislav Petkov
|
dbae0a934f |
x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
Those were added as part of the SMAP enablement but SMAP is currently an integral part of kernel proper and there's no need to disable it anymore. Rip out that functionality. Leave --uaccess default on for objtool as this is what objtool should do by default anyway. If still needed - clearcpuid=smap. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220127115626.14179-4-bp@alien8.de |
||
|
Borislav Petkov
|
c949110ef4 |
x86/cpu: Remove "nosep"
That chicken bit was added by
|
||
|
Borislav Petkov
|
1625c833db |
x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=
Having to give the X86_FEATURE array indices in order to disable a
feature bit for testing is not really user-friendly. So accept the
feature bit names too.
Some feature bits don't have names so there the array indices are still
accepted, of course.
Clearing CPUID flags is not something which should be done in production
so taint the kernel too.
An exemplary cmdline would then be something like:
clearcpuid=de,440,smca,succory,bmi1,3dnow
("succory" is wrong on purpose). And it says:
[ ... ] Clearing CPUID bits: de 13:24 smca (unknown: succory) bmi1 3dnow
[ Fix CONFIG_X86_FEATURE_NAMES=n build error as reported by the 0day
robot: https://lore.kernel.org/r/202203292206.ICsY2RKX-lkp@intel.com ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220127115626.14179-2-bp@alien8.de
|
||
|
Linus Torvalds
|
478f74a3d8 |
Random number generator fixes for Linux 5.18-rc1.
-----BEGIN PGP SIGNATURE-----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=NfL4
-----END PGP SIGNATURE-----
Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- If a hardware random number generator passes a sufficiently large
chunk of entropy to random.c during early boot, we now skip the
"fast_init" business and let it initialize the RNG.
This makes CONFIG_RANDOM_TRUST_BOOTLOADER=y actually useful.
- We already have the command line `random.trust_cpu=0/1` option for
RDRAND, which let distros enable CONFIG_RANDOM_TRUST_CPU=y while
placating concerns of more paranoid users.
Now we add `random.trust_bootloader=0/1` so that distros can
similarly enable CONFIG_RANDOM_TRUST_BOOTLOADER=y.
- Re-add a comment that got removed by accident in the recent revert.
- Add the spec-compliant ACPI CID for vmgenid, which Microsoft added to
the vmgenid spec at Ard's request during earlier review.
- Restore build-time randomness via the latent entropy plugin, which
was lost when we transitioned to using a hash function.
* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: mix build-time latent entropy into pool at init
virt: vmgenid: recognize new CID added by Hyper-V
random: re-add removed comment about get_random_{u32,u64} reseeding
random: treat bootloader trust toggle the same way as cpu trust toggle
random: skip fast_init if hwrng provides large chunk of entropy
|
||
|
Linus Torvalds
|
1d59c3b669 |
More power management updates for 5.18-rc1
- Add per core DVFS support for QCom SoC (Bjorn Andersson), convert
to yaml binding (Manivannan Sadhasivam) and various other fixes
to the QCom drivers (Luca Weiss).
- Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan
Agner).
- Fix CPPC driver's freq/performance conversions (Pierre Gondois).
- Minor generic cleanups (Yury Norov).
- Introduce opp-microwatt property to the OPP core, bindings, etc
(Lukasz Luba).
- Convert DT bindings to schema format and various related fixes
(Yassine Oudjana).
- Expose OPP's OF node in debugfs (Viresh Kumar).
- Add Intel uncore frequency scaling documentation file to its
MAINTAINERS entry (Srinivas Pandruvada).
- Clean up the AMD P-state driver documentation (Jan Engelhardt).
-----BEGIN PGP SIGNATURE-----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=rsb/
-----END PGP SIGNATURE-----
Merge tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update ARM cpufreq drivers, the OPP (Operating Performance
Points) library and the power management documentation.
Specifics:
- Add per core DVFS support for QCom SoC (Bjorn Andersson), convert
to yaml binding (Manivannan Sadhasivam) and various other fixes to
the QCom drivers (Luca Weiss).
- Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan
Agner).
- Fix CPPC driver's freq/performance conversions (Pierre Gondois).
- Minor generic cleanups (Yury Norov).
- Introduce opp-microwatt property to the OPP core, bindings, etc
(Lukasz Luba).
- Convert DT bindings to schema format and various related fixes
(Yassine Oudjana).
- Expose OPP's OF node in debugfs (Viresh Kumar).
- Add Intel uncore frequency scaling documentation file to its
MAINTAINERS entry (Srinivas Pandruvada).
- Clean up the AMD P-state driver documentation (Jan Engelhardt)"
* tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
Documentation: amd-pstate: grammar and sentence structure updates
dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example
Documentation: EM: Describe new registration method using DT
OPP: Add support of "opp-microwatt" for EM registration
PM: EM: add macro to set .active_power() callback conditionally
OPP: Add "opp-microwatt" supporting code
dt-bindings: opp: Add "opp-microwatt" entry in the OPP
MAINTAINERS: Add additional file to uncore frequency control
cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
cpufreq: qcom-hw: Add support for per-core-dcvs
dt-bindings: power: avs: qcom,cpr: Convert to DT schema
arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables
arm64: dts: qcom: msm8996: Rename cluster OPP tables
dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema
dt-bindings: opp: qcom-opp: Convert to DT schema
arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible
dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles
opp: Expose of-node's name in debugfs
cpufreq: CPPC: Fix performance/frequency conversion
...
|
||
Rafael J. Wysocki
|
3b65dd5be3 |
Merge branch 'pm-docs'
Merge additional power management documentation udates for 5.18-rc1: - Add Intel uncore frequency scaling documentation file to its MAINTAINERS entry (Srinivas Pandruvada). - Clean up the AMD P-state driver documentation (Jan Engelhardt). * pm-docs: Documentation: amd-pstate: grammar and sentence structure updates MAINTAINERS: Add additional file to uncore frequency control |
||
|
Linus Torvalds
|
1464677662 |
platform-drivers-x86 for v5.18-1
Highlights:
- new drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
- removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
- amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
- hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
- serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
- think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
- thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
- x86-android-tablets
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
- Lots of various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI / scan:
- Create platform device for CS35L41
ACPI / x86:
- Add support for LPS0 callback handler
ALSA:
- hda/realtek: Add support for HP Laptops
Add AMD system management interface:
- Add AMD system management interface
Add Intel Software Defined Silicon driver:
- Add Intel Software Defined Silicon driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Certificate support
- Add x86/amd_hsmp driver
ISST:
- Fix possible circular locking dependency detected
Input:
- soc_button_array - add support for Microsoft Surface 3 (MSHW0028) buttons
Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12:
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-pinctrl-pmu_clk' into review-hans-gcc12
Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans:
- Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans
Replace acpi_bus_get_device():
- Replace acpi_bus_get_device()
amd-pmc:
- Only report STB errors when STB enabled
- Drop CPU QoS workaround
- Output error codes in messages
- Move to later in the suspend process
- Validate entry into the deepest state on resume
- uninitialized variable in amd_pmc_s2d_init()
- Set QOS during suspend on CZN w/ timer wakeup
- Add support for AMD Spill to DRAM STB feature
- Correct usage of SMU version
- Make amd_pmc_stb_debugfs_fops static
asus-tf103c-dock:
- Make 2 global structs static
asus-wmi:
- Fix regression when probing for fan curve control
hp-wmi:
- support omen thermal profile policy v1
- Changing bios_args.data to be dynamically allocated
- Fix 0x05 error code reported by several WMI calls
- Fix SW_TABLET_MODE detection method
- Fix hp_wmi_read_int() reporting error (0x05)
huawei-wmi:
- check the return value of device_create_file()
i2c-multi-instantiate:
- Rename it for a generic serial driver name
int3472:
- Add terminator to gpiod_lookup_table
intel-uncore-freq:
- fix uncore_freq_common_init() error codes
intel_cht_int33fe:
- Move to intel directory
- Drop Lenovo Yogabook YB1-X9x code
- Switch to DMI modalias based loading
intel_crystal_cove_charger:
- Fix IRQ masking / unmasking
lg-laptop:
- Move setting of battery charge limit to common location
pinctrl:
- baytrail: Add pinconf group + function for the pmu_clk
platform/dcdbas:
- move EXPORT_SYMBOL after function
platform/surface:
- Remove Surface 3 Button driver
- surface3-wmi: Simplify resource management
- Replace acpi_bus_get_device()
- Reinstate platform dependency
platform/x86/intel-uncore-freq:
- Split common and enumeration part
platform/x86/intel/uncore-freq:
- Display uncore current frequency
- Use sysfs API to create attributes
- Move to uncore-frequency folder
selftests:
- sdsi: test sysfs setup
serial-multi-instantiate:
- Add SPI support
- Reorganize I2C functions
spi:
- Add API to count spi acpi resources
- Support selection of the index of the ACPI Spi Resource before alloc
- Create helper API to lookup ACPI info for spi device
- Make spi_alloc_device and spi_add_device public again
surface:
- surface3_power: Fix battery readings on batteries without a serial number
think-lmi:
- Certificate authentication support
thinkpad_acpi:
- consistently check fan_get_status return.
- Don't use test_bit on an integer
- Fix compiler warning about uninitialized err variable
- clean up dytc profile convert
- Add PSC mode support
- Add dual fan probe
- Add dual-fan quirk for T15g (2nd gen)
- Fix incorrect use of platform profile on AMD platforms
- Add quirk for ThinkPads without a fan
tools arch x86:
- Add Intel SDSi provisiong tool
touchscreen_dmi:
- Add info for the RWC NANOTE P8 AY07J 2-in-1
x86-android-tablets:
- Depend on EFI and SPI
- Lenovo Yoga Tablet 2 830/1050 sound support
- Workaround Lenovo Yoga Tablet 2 830/1050 poweroff hang
- Add Lenovo Yoga Tablet 2 830 / 1050 data
- Fix EBUSY error when requesting IOAPIC IRQs
- Minor charger / fuel-gauge improvements
- Add Nextbook Ares 8 data
- Add IRQ to Asus ME176C accelerometer info
- Add lid-switch gpio-keys pdev to Asus ME176C + TF103C
- Add x86_android_tablet_get_gpiod() helper
- Add Asus ME176C/TF103C charger and fuelgauge props
- Add battery swnode support
- Trivial typo fix for MODULE_AUTHOR
- Fix the buttons on CZC P10T tablet
- Constify the gpiod_lookup_tables arrays
- Add an init() callback to struct x86_dev_info
- Add support for disabling ACPI _AEI handlers
- Correct crystal_cove_charger module name
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmI8SjEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYUwf/cdUMPFy5cwpHq1LuqGy+PxVCRHCe
71PFd2Ycj+HGOtrt66RxSiCC1Seb4tylr7FvudToDaqWjlBf5n6LhpDudg4ds7Qw
lCuRlaXTIrF7p3nOLIsWvJPRqacMG79KkRM62MLTS2evtRYjbnKvFzNPJPzr8827
1AhCakE92S8gkR5lUZYYHtsaz9rZ4z4TrEtjO6GdlbL2bDw0l18dNNwdMomfVpNS
bBIHIDLeufDuMJ4PxIHlE5MB3AuZAuc0HTJWihozyJX/h5FMGI6qVm0/s9RAfHgX
XdMCpADtS/JjHCmkFgLZYIzvXTxwQVZRo5VO0Wrv5Mis6gSpxJXCd0aKlA==
=1x9/
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
|
||
Jan Engelhardt
|
7000ef3805 |
Documentation: amd-pstate: grammar and sentence structure updates
Signed-off-by: Jan Engelhardt <jengelh@inai.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jason A. Donenfeld
|
d97c68d178 |
random: treat bootloader trust toggle the same way as cpu trust toggle
If CONFIG_RANDOM_TRUST_CPU is set, the RNG initializes using RDRAND. But, the user can disable (or enable) this behavior by setting `random.trust_cpu=0/1` on the kernel command line. This allows system builders to do reasonable things while avoiding howls from tinfoil hatters. (Or vice versa.) CONFIG_RANDOM_TRUST_BOOTLOADER is basically the same thing, but regards the seed passed via EFI or device tree, which might come from RDRAND or a TPM or somewhere else. In order to allow distros to more easily enable this while avoiding those same howls (or vice versa), this commit adds the corresponding `random.trust_bootloader=0/1` toggle. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Graham Christensen <graham@grahamc.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Link: https://github.com/NixOS/nixpkgs/pull/165355 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Linus Torvalds
|
52deda9551 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ... |
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
|
Linus Torvalds
|
1ebdbeb03e |
ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical sections
that last too long for very large guests backed by 4 KiB SPTEs.
- Zap invalid and defunct roots asynchronously via concurrency-managed
work queue.
- Allowing yielding when zapping TDP MMU roots in response to the root's
last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the paging
structure now holds RCU as a proxy for all vCPUs running in the guest,
i.e. to prolongs the grace period on their behalf. It then kicks the
the vCPUs out of guest mode before doing rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that
need memcg accounting
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmI4fdwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq8gf/WoeVHtw2QlL5Mmz6McvRRmPAYPLV
wLUIFNrRqRvd8Tw4kivzZoh/xTpwmnojv0YdK5SjKAiMjgv094YI1LrNp1JSPvmL
pitocMkA10RSJNWHeEMg9cMSKH0rKiqeYl6S1e2XsdB+UZZ2BINOCVtvglmjTAvJ
dFBdKdBkqjAUZbdXAGIvz4JEEER3N/LkFDKGaUGX+0QIQOzGBPIyLTxynxIDG6mt
RViCCFyXdy5NkVp5hZFm96vQ2qAlWL9B9+iKruQN++82+oqWbeTdSqPhdwF7GyFz
BfOv3gobQ2c4ef/aMLO5LswZ9joI1t/4kQbbAn6dNybpOAz/NXfDnbNefg==
=keox
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
|
||
Guilherme G. Piccoli
|
f953f140f3 |
panic: move panic_print before kmsg dumpers
The panic_print setting allows users to collect more information in a
panic event, like memory stats, tasks, CPUs backtraces, etc. This is an
interesting debug mechanism, but currently the print event happens *after*
kmsg_dump(), meaning that pstore, for example, cannot collect a dmesg with
the panic_print extra information.
This patch changes that in 2 steps:
(a) The panic_print setting allows to replay the existing kernel log
buffer to the console (bit 5), besides the extra information dump.
This functionality makes sense only at the end of the panic()
function. So, we hereby allow to distinguish the two situations by a
new boolean parameter in the function panic_print_sys_info().
(b) With the above change, we can safely call panic_print_sys_info()
before kmsg_dump(), allowing to dump the extra information when using
pstore or other kmsg dumpers.
The additional messages from panic_print could overwrite the oldest
messages when the buffer is full. The only reasonable solution is to use
a large enough log buffer, hence we added an advice into the kernel
parameters documentation about that.
Link: https://lkml.kernel.org/r/20220214141308.841525-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Guilherme G. Piccoli
|
8d470a45d1 |
panic: add option to dump all CPUs backtraces in panic_print
Currently the "panic_print" parameter/sysctl allows some interesting debug information to be printed during a panic event. This is useful for example in cases the user cannot kdump due to resource limits, or if the user collects panic logs in a serial output (or pstore) and prefers a fast reboot instead of a kdump. Happens that currently there's no way to see all CPUs backtraces in a panic using "panic_print" on architectures that support that. We do have "oops_all_cpu_backtrace" sysctl, but although partially overlapping in the functionality, they are orthogonal in nature: "panic_print" is a panic tuning (and we have panics without oopses, like direct calls to panic() or maybe other paths that don't go through oops_enter() function), and the original purpose of "oops_all_cpu_backtrace" is to provide more information on oopses for cases in which the users desire to continue running the kernel even after an oops, i.e., used in non-panic scenarios. So, we hereby introduce an additional bit for "panic_print" to allow dumping the CPUs backtraces during a panic event. Link: https://lkml.kernel.org/r/20211109202848.610874-3-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: Feng Tang <feng.tang@intel.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Guilherme G. Piccoli
|
a1ff1de00d |
docs: sysctl/kernel: add missing bit to panic_print
Patch series "Some improvements on panic_print". This is a mix of a documentation fix with some additions to the "panic_print" syscall / parameter. The goal here is being able to collect all CPUs backtraces during a panic event and also to enable "panic_print" in a kdump event - details of the reasoning and design choices in the patches. This patch (of 3): Commit |
||
Tiezhu Yang
|
ae6694c1aa |
docs: kdump: add scp example to write out the dump file
Except cp and makedumpfile, add scp example to write out the dump file. Link: https://lkml.kernel.org/r/1644324666-15947-3-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Baoquan He <bhe@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tiezhu Yang
|
b2377d4b94 |
docs: kdump: update description about sysfs file system support
Patch series "Update doc and fix some issues about kdump", v2.
This patch (of 5):
After commit
|
||
|
Linus Torvalds
|
182966e1cd |
media updates for v5.18-rc1
-----BEGIN PGP SIGNATURE-----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=Bc0l
-----END PGP SIGNATURE-----
Merge tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- a major reorg at platform Kconfig/Makefile files, organizing them per
vendor. The other media Kconfig/Makefile files also sorted
- New sensor drivers: hi847, isl7998x, ov08d10
- New Amphion vpu decoder stateful driver
- New Atmel microchip csi2dc driver
- tegra-vde driver promoted from staging
- atomisp: some fixes for it to work on BYT
- imx7-mipi-csis driver promoted from staging and renamed
- camss driver got initial support for VFE hardware version Titan 480
- mtk-vcodec has gained support for MT8192
- lots of driver changes, fixes and improvements
* tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits)
media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST
media: amphion: cleanup media device if register it fail
media: amphion: fix some issues to improve robust
media: amphion: fix some error related with undefined reference to __divdi3
media: amphion: fix an issue that using pm_runtime_get_sync incorrectly
media: vidtv: use vfree() for memory allocated with vzalloc()
media: m5mols/m5mols.h: document new reset field
media: pixfmt-yuv-planar.rst: fix PIX_FMT labels
media: platform: Remove unnecessary print function dev_err()
media: amphion: Add missing of_node_put() in vpu_core_parse_dt()
media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done()
media: platform: amphion: Fix build error without MAILBOX
media: spi: Kconfig: Place SPI drivers on a single menu
media: i2c: Kconfig: move camera drivers to the top
media: atomisp: fix bad usage at error handling logic
media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/
media: media/*/Kconfig: sort entries
media: Kconfig: cleanup VIDEO_DEV dependencies
media: platform/*/Kconfig: make manufacturer menus more uniform
media: platform: Create vendor/{Makefile,Kconfig} files
...
|
||
|
Linus Torvalds
|
1bc191051d |
Tracing updates for 5.18:
- New user_events interface. User space can register an event with the kernel describing the format of the event. Then it will receive a byte in a page mapping that it can check against. A privileged task can then enable that event like any other event, which will change the mapped byte to true, telling the user space application to start writing the event to the tracing buffer. - Add new "ftrace_boot_snapshot" kernel command line parameter. When set, the tracing buffer will be saved in the snapshot buffer at boot up when the kernel hands things over to user space. This will keep the traces that happened at boot up available even if user space boot up has tracing as well. - Have TRACE_EVENT_ENUM() also update trace event field type descriptions. Thus if a static array defines its size with an enum, the user space trace event parsers can still know how to parse that array. - Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the TRACE_EVENT() macro, but will attach to an existing tracepoint. This will make one tracepoint be able to trace different content and not be stuck at only what the original TRACE_EVENT() macro exports. - Fixes to tracing error logging. - Better saving of cmdlines to PIDs when tracing (use the wakeup events for mapping). -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjiO3RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qhQzAQDtek5p80p/zkMGymm14wSH6qq0NdgN Kv7fTBwEewUa0gD/UCOVLw4Oj+JtHQhCa3sCGZopmRv0BT1+4UQANqosKQY= =Au08 -----END PGP SIGNATURE----- Merge tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - New user_events interface. User space can register an event with the kernel describing the format of the event. Then it will receive a byte in a page mapping that it can check against. A privileged task can then enable that event like any other event, which will change the mapped byte to true, telling the user space application to start writing the event to the tracing buffer. - Add new "ftrace_boot_snapshot" kernel command line parameter. When set, the tracing buffer will be saved in the snapshot buffer at boot up when the kernel hands things over to user space. This will keep the traces that happened at boot up available even if user space boot up has tracing as well. - Have TRACE_EVENT_ENUM() also update trace event field type descriptions. Thus if a static array defines its size with an enum, the user space trace event parsers can still know how to parse that array. - Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the TRACE_EVENT() macro, but will attach to an existing tracepoint. This will make one tracepoint be able to trace different content and not be stuck at only what the original TRACE_EVENT() macro exports. - Fixes to tracing error logging. - Better saving of cmdlines to PIDs when tracing (use the wakeup events for mapping). * tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits) tracing: Have type enum modifications copy the strings user_events: Add trace event call as root for low permission cases tracing/user_events: Use alloc_pages instead of kzalloc() for register pages tracing: Add snapshot at end of kernel boot up tracing: Have TRACE_DEFINE_ENUM affect trace event types as well tracing: Fix strncpy warning in trace_events_synth.c user_events: Prevent dyn_event delete racing with ioctl add/delete tracing: Add TRACE_CUSTOM_EVENT() macro tracing: Move the defines to create TRACE_EVENTS into their own files tracing: Add sample code for custom trace events tracing: Allow custom events to be added to the tracefs directory tracing: Fix last_cmd_set() string management in histogram code user_events: Fix potential uninitialized pointer while parsing field tracing: Fix allocation of last_cmd in last_cmd_set() user_events: Add documentation file user_events: Add sample code for typical usage user_events: Add self-test for validator boundaries user_events: Add self-test for perf_event integration user_events: Add self-test for dynamic_events integration user_events: Add self-test for ftrace integration ... |
||
|
Linus Torvalds
|
3ef4ea3d84 |
printk changes for 5.18
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmI4ggsACgkQUqAMR0iA lPLrlA//R12HGCGSzdpdyynl+5wByIqcHe8RANHOAj9f9qxBtmYv2ZK69mzSvhHO 6kAGdb3vBtxo1NCHeqxlXpds9GP/zOGEWmEJP2P7pIZ8ci8QtwrXCtQ8XIW9UGhJ WHzXpXkfzcIDsRZs6B1pxN5cRXuW2VVzfgxyu6L+hvNV0o0PPO4A48ptzNBZh8rj URAid+n/aGs9SOXM0h8SRjjBYEqjiB2RZ3gLg5XGZmcATtitBO135LGZnBR2fwnX RZKckbdA/fBzqS4Njsp2rV5Rqldwj7mHzQbcsQm4YDrxSdl8d78XxQdAA5sNyaCD ToDw6/DeegXzgtPJpuBH/ymF9RczIu4l3eawO1FBMCB5EPq56zVHWErxry8qaTgi yQFqhBgifNN5NqfQCn7dyF10usmsvImFczre7ZxJvL7vmzqDsYYqdZG5oouLudR4 iOphFwX71v4X+RsxbOXqEt+mS3AwqEJc1SZl5rrDc4TSUOE1qCd+ncLTAuAf3Wfm 1xaZ+siomahcZAKrgmSw6AcD5bU+JJpr6FktKAddiO7J1+nIdT1lYEbpUsfWZ/p8 Kx8A2M2ula+whJ6CgtnGTsbsacsFi+j/MioMTGZIU+Fubkig3XEeIp3QUO6sEN+9 /sUQ6Wj6c95miWdttff9o6ap8py9NbfuKIw/HMOesfLVKP82rmw= =EUpJ -----END PGP SIGNATURE----- Merge tag 'printk-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Make %pK behave the same as %p for kptr_restrict == 0 also with no_hash_pointers parameter - Ignore the default console in the device tree also when console=null or console="" is used on the command line - Document console=null and console="" behavior - Prevent a deadlock and a livelock caused by console_lock in panic() - Make console_lock available for panicking CPU - Fast query for the next to-be-used sequence number - Use the expected return values in printk.devkmsg __setup handler - Use the correct atomic operations in wake_up_klogd() irq_work handler - Avoid possible unaligned access when handling %4cc printing format * tag 'printk-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: fix return value of printk.devkmsg __setup handler vsprintf: Fix %pK with kptr_restrict == 0 printk: make suppress_panic_printk static printk: Set console_set_on_cmdline=1 when __add_preferred_console() is called with user_specified == true Docs: printk: add 'console=null|""' to admin/kernel-parameters printk: use atomic updates for klogd work printk: Drop console_sem during panic printk: Avoid livelock with heavy printk during panic printk: disable optimistic spin during panic printk: Add panic_in_progress helper vsprintf: Move space out of string literals in fourcc_string() vsprintf: Fix potential unaligned access printk: ringbuffer: Improve prb_next_seq() performance |
||
|
Linus Torvalds
|
3bf03b9a08 |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
- A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs
- Most the MM patches which precede the patches in Willy's tree: kasan,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb,
userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp,
cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap,
zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (227 commits)
mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release()
Docs/ABI/testing: add DAMON sysfs interface ABI document
Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
selftests/damon: add a test for DAMON sysfs interface
mm/damon/sysfs: support DAMOS stats
mm/damon/sysfs: support DAMOS watermarks
mm/damon/sysfs: support schemes prioritization
mm/damon/sysfs: support DAMOS quotas
mm/damon/sysfs: support DAMON-based Operation Schemes
mm/damon/sysfs: support the physical address space monitoring
mm/damon/sysfs: link DAMON for virtual address spaces monitoring
mm/damon: implement a minimal stub for sysfs-based DAMON interface
mm/damon/core: add number of each enum type values
mm/damon/core: allow non-exclusive DAMON start/stop
Docs/damon: update outdated term 'regions update interval'
Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling
Docs/vm/damon: call low level monitoring primitives the operations
mm/damon: remove unnecessary CONFIG_DAMON option
mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}()
mm/damon/dbgfs-test: fix is_target_id() change
...
|
||
|
SeongJae Park
|
b18402726b |
Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
This commit adds detailed usage of DAMON sysfs interface in the admin-guide document for DAMON. Link: https://lkml.kernel.org/r/20220228081314.5770-13-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Xin Hao <xhao@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
SeongJae Park
|
4c1f287f8c |
Docs/damon: update outdated term 'regions update interval'
Before DAMON is merged in the mainline, the concept of 'regions update interval' has generalized to be used as the time interval for update of any monitoring operations related data structure, but the document has not updated properly. This commit updates the document for better consistency. Link: https://lkml.kernel.org/r/20220222170100.17068-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
SeongJae Park
|
8041c87b91 |
Docs/admin-guide/mm/damon/usage: update for changed initail_regions file input
A previous commit made init_regions debugfs file to use target index instead of target id for specifying the target of the init regions. This commit updates the usage document to reflect the change. Link: https://lkml.kernel.org/r/20211230100723.2238-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Maciej S. Szmigiero
|
cb325ddde5 |
mm/zswap.c: allow handling just same-value filled pages
Zswap has an ability to efficiently store same-value filled pages, which can be turned on and off using the "same_filled_pages_enabled" parameter. However, there is currently no way to enable just this (lightweight) functionality, while not making use of the whole compressed page storage machinery. Add a "non_same_filled_pages_enabled" parameter which allows disabling handling of pages that aren't same-value filled. This way zswap can be run in such lightweight same-value filled pages only mode. Link: https://lkml.kernel.org/r/7dbafa963e8bab43608189abbe2067f4b9287831.1641247624.git.maciej.szmigiero@oracle.com Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Huang Ying
|
c574bbe917 |
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are usually different. In such system, because of the memory accessing pattern changing etc, some pages in the slow memory may become hot globally. So in this patch, the NUMA balancing mechanism is enhanced to optimize the page placement among the different memory types according to hot/cold dynamically. In a typical memory tiering system, there are CPUs, fast memory and slow memory in each physical NUMA node. The CPUs and the fast memory will be put in one logical node (called fast memory node), while the slow memory will be put in another (faked) logical node (called slow memory node). That is, the fast memory is regarded as local while the slow memory is regarded as remote. So it's possible for the recently accessed pages in the slow memory node to be promoted to the fast memory node via the existing NUMA balancing mechanism. The original NUMA balancing mechanism will stop to migrate pages if the free memory of the target node becomes below the high watermark. This is a reasonable policy if there's only one memory type. But this makes the original NUMA balancing mechanism almost do not work to optimize page placement among different memory types. Details are as follows. It's the common cases that the working-set size of the workload is larger than the size of the fast memory nodes. Otherwise, it's unnecessary to use the slow memory at all. So, there are almost always no enough free pages in the fast memory nodes, so that the globally hot pages in the slow memory node cannot be promoted to the fast memory node. To solve the issue, we have 2 choices as follows, a. Ignore the free pages watermark checking when promoting hot pages from the slow memory node to the fast memory node. This will create some memory pressure in the fast memory node, thus trigger the memory reclaiming. So that, the cold pages in the fast memory node will be demoted to the slow memory node. b. Define a new watermark called wmark_promo which is higher than wmark_high, and have kswapd reclaiming pages until free pages reach such watermark. The scenario is as follows: when we want to promote hot-pages from a slow memory to a fast memory, but fast memory's free pages would go lower than high watermark with such promotion, we wake up kswapd with wmark_promo watermark in order to demote cold pages and free us up some space. So, next time we want to promote hot-pages we might have a chance of doing so. The choice "a" may create high memory pressure in the fast memory node. If the memory pressure of the workload is high, the memory pressure may become so high that the memory allocation latency of the workload is influenced, e.g. the direct reclaiming may be triggered. The choice "b" works much better at this aspect. If the memory pressure of the workload is high, the hot pages promotion will stop earlier because its allocation watermark is higher than that of the normal memory allocation. So in this patch, choice "b" is implemented. A new zone watermark (WMARK_PROMO) is added. Which is larger than the high watermark and can be controlled via watermark_scale_factor. In addition to the original page placement optimization among sockets, the NUMA balancing mechanism is extended to be used to optimize page placement according to hot/cold among different memory types. So the sysctl user space interface (numa_balancing) is extended in a backward compatible way as follow, so that the users can enable/disable these functionality individually. The sysctl is converted from a Boolean value to a bits field. The definition of the flags is, - 0: NUMA_BALANCING_DISABLED - 1: NUMA_BALANCING_NORMAL - 2: NUMA_BALANCING_MEMORY_TIERING We have tested the patch with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. Thanks Andrew Morton to help fix the document format error. Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Muchun Song
|
e7d324850b |
mm: hugetlb: free the 2nd vmemmap page associated with each HugeTLB page
Patch series "Free the 2nd vmemmap page associated with each HugeTLB
page", v7.
This series can minimize the overhead of struct page for 2MB HugeTLB
pages significantly. It further reduces the overhead of struct page by
12.5% for a 2MB HugeTLB compared to the previous approach, which means
2GB per 1TB HugeTLB. It is a nice gain. Comments and reviews are
welcome. Thanks.
The main implementation and details can refer to the commit log of patch
1. In this series, I have changed the following four helpers, the
following table shows the impact of the overhead of those helpers.
+------------------+-----------------------+
| APIs | head page | tail page |
+------------------+-----------+-----------+
| PageHead() | Y | N |
+------------------+-----------+-----------+
| PageTail() | Y | N |
+------------------+-----------+-----------+
| PageCompound() | N | N |
+------------------+-----------+-----------+
| compound_head() | Y | N |
+------------------+-----------+-----------+
Y: Overhead is increased.
N: Overhead is _NOT_ increased.
It shows that the overhead of those helpers on a tail page don't change
between "hugetlb_free_vmemmap=on" and "hugetlb_free_vmemmap=off". But the
overhead on a head page will be increased when "hugetlb_free_vmemmap=on"
(except PageCompound()). So I believe that Matthew Wilcox's folio series
will help with this.
The users of PageHead() and PageTail() are much less than compound_head()
and most users of PageTail() are VM_BUG_ON(), so I have done some tests
about the overhead of compound_head() on head pages.
I have tested the overhead of calling compound_head() on a head page,
which is 2.11ns (Measure the call time of 10 million times
compound_head(), and then average).
For a head page whose address is not aligned with PAGE_SIZE or a
non-compound page, the overhead of compound_head() is 2.54ns which is
increased by 20%. For a head page whose address is aligned with
PAGE_SIZE, the overhead of compound_head() is 2.97ns which is increased by
40%. Most pages are the former. I do not think the overhead is
significant since the overhead of compound_head() itself is low.
This patch (of 5):
This patch minimizes the overhead of struct page for 2MB HugeTLB pages
significantly. It further reduces the overhead of struct page by 12.5%
for a 2MB HugeTLB compared to the previous approach, which means 2GB per
1TB HugeTLB (2MB type).
After the feature of "Free sonme vmemmap pages of HugeTLB page" is
enabled, the mapping of the vmemmap addresses associated with a 2MB
HugeTLB page becomes the figure below.
HugeTLB struct pages(8 pages) page frame(8 pages)
+-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+---> PG_head
| | | 0 | -------------> | 0 |
| | +-----------+ +-----------+
| | | 1 | -------------> | 1 |
| | +-----------+ +-----------+
| | | 2 | ----------------^ ^ ^ ^ ^ ^
| | +-----------+ | | | | |
| | | 3 | ------------------+ | | | |
| | +-----------+ | | | |
| | | 4 | --------------------+ | | |
| 2MB | +-----------+ | | |
| | | 5 | ----------------------+ | |
| | +-----------+ | |
| | | 6 | ------------------------+ |
| | +-----------+ |
| | | 7 | --------------------------+
| | +-----------+
| |
| |
| |
+-----------+
As we can see, the 2nd vmemmap page frame (indexed by 1) is reused and
remaped. However, the 2nd vmemmap page frame is also can be freed to
the buddy allocator, then we can change the mapping from the figure
above to the figure below.
HugeTLB struct pages(8 pages) page frame(8 pages)
+-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+---> PG_head
| | | 0 | -------------> | 0 |
| | +-----------+ +-----------+
| | | 1 | ---------------^ ^ ^ ^ ^ ^ ^
| | +-----------+ | | | | | |
| | | 2 | -----------------+ | | | | |
| | +-----------+ | | | | |
| | | 3 | -------------------+ | | | |
| | +-----------+ | | | |
| | | 4 | ---------------------+ | | |
| 2MB | +-----------+ | | |
| | | 5 | -----------------------+ | |
| | +-----------+ | |
| | | 6 | -------------------------+ |
| | +-----------+ |
| | | 7 | ---------------------------+
| | +-----------+
| |
| |
| |
+-----------+
After we do this, all tail vmemmap pages (1-7) are mapped to the head
vmemmap page frame (0). In other words, there are more than one page
struct with PG_head associated with each HugeTLB page. We __know__ that
there is only one head page struct, the tail page structs with PG_head are
fake head page structs. We need an approach to distinguish between those
two different types of page structs so that compound_head(), PageHead()
and PageTail() can work properly if the parameter is the tail page struct
but with PG_head.
The following code snippet describes how to distinguish between real and
fake head page struct.
if (test_bit(PG_head, &page->flags)) {
unsigned long head = READ_ONCE(page[1].compound_head);
if (head & 1) {
if (head == (unsigned long)page + 1)
==> head page struct
else
==> tail page struct
} else
==> head page struct
}
We can safely access the field of the @page[1] with PG_head because the
@page is a compound page composed with at least two contiguous pages.
[songmuchun@bytedance.com: restore lost comment changes]
Link: https://lkml.kernel.org/r/20211101031651.75851-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20211101031651.75851-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Chen Huang <chenhuang5@huawei.com>
Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Sebastian Andrzej Siewior
|
2343e88d23 |
mm/memcg: disable threshold event handlers on PREEMPT_RT
During the integration of PREEMPT_RT support, the code flow around memcg_check_events() resulted in `twisted code'. Moving the code around and avoiding then would then lead to an additional local-irq-save section within memcg_check_events(). While looking better, it adds a local-irq-save section to code flow which is usually within an local-irq-off block on non-PREEMPT_RT configurations. The threshold event handler is a deprecated memcg v1 feature. Instead of trying to get it to work under PREEMPT_RT just disable it. There should be no users on PREEMPT_RT. From that perspective it makes even less sense to get it to work under PREEMPT_RT while having zero users. Make memory.soft_limit_in_bytes and cgroup.event_control return -EOPNOTSUPP on PREEMPT_RT. Make an empty memcg_check_events() and memcg_write_event_control() which return only -EOPNOTSUPP on PREEMPT_RT. Document that the two knobs are disabled on PREEMPT_RT. Link: https://lkml.kernel.org/r/20220226204144.1008339-3-bigeasy@linutronix.de Suggested-by: Michal Hocko <mhocko@kernel.org> Suggested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yosry Ahmed
|
a8c49af3be |
memcg: add per-memcg total kernel memory stat
Currently memcg stats show several types of kernel memory: kernel stack, page tables, sock, vmalloc, and slab. However, there are other allocations with __GFP_ACCOUNT (or supersets such as GFP_KERNEL_ACCOUNT) that are not accounted in any of those stats, a few examples are: - various kvm allocations (e.g. allocated pages to create vcpus) - io_uring - tmp_page in pipes during pipe_write() - bpf ringbuffers - unix sockets Keeping track of the total kernel memory is essential for the ease of migration from cgroup v1 to v2 as there are large discrepancies between v1's kmem.usage_in_bytes and the sum of the available kernel memory stats in v2. Adding separate memcg stats for all __GFP_ACCOUNT kernel allocations is an impractical maintenance burden as there a lot of those all over the kernel code, with more use cases likely to show up in the future. Therefore, add a "kernel" memcg stat that is analogous to kmem page counter, with added benefits such as using rstat infrastructure which aggregates stats more efficiently. Additionally, this provides a lighter alternative in case the legacy kmem is deprecated in the future [yosryahmed@google.com: v2] Link: https://lkml.kernel.org/r/20220203193856.972500-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20220201200823.3283171-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
3fe2f7446f |
Changes in this cycle were:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
|
||
|
Linus Torvalds
|
fd27687791 |
hwmon updates for v5.18
New drivers
- Driver for Texas Instruments TMP464 and TMP468
- Driver for Vicor PLI1209BC Digital Supervisor
- Driver for ASUS EC
Improvements to existing drivers:
- adt7x10: Convert to use regmap, convert to use with_info API,
use hwmon_notify_event, and other cleanup
- aquacomputer_d5next: Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors: Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors: Support T_Sensor on Prime X570-Pro
Deprecate driver (replaced by new driver)
- axi-fan-control: Use hwmon_notify_event
- dell-smm: Clean up CONFIG_I8K, disable fan type support for
Inspiron 3505, various other cleanup
- hwmon core: Report attribute name with udev events,
Add "label" attribute to ABI,
Add support for pwm auto channels attribute
- max6639: Add regulator support
- lm70: Add support for TI TMP125
- lm83: Cleanup, convert to use with_info API
- mlxreg-fan: Use pwm attribute for setting fan speed low limit
- nct6775: Sdd ASUS ROG STRIX Z390/Z490/X570-* / PRIME X570-P,
PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A,
and support for TSI temperature registers
- occ: Add various new sysfs attributes
- pmbus core: Handle VIN unit off status,
Add regulator supply into macro,
Add get_error_flags support to regulator ops
- pmbus/adm1275: Allow setting sample averaging
- pmbus/lm25066: Add regulator support
- pmbus/xdpe12284: Add support for xdpe11280 and register as regulator
- powr1220: Convert to with_info API,
Add support for Lattice's POWR1014 power manager IC
- sch56xx: Cleanup and minor improvements
- sch5627: Add pwmX_auto_channels_temp support
- tc654: Add thermal_cooling device support
-----BEGIN PGP SIGNATURE-----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=4u33
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Texas Instruments TMP464 and TMP468 driver
- Vicor PLI1209BC Digital Supervisor driver
- ASUS EC driver
Improvements to existing drivers:
- adt7x10:
- Convert to use regmap
- convert to use with_info API
- use hwmon_notify_event
- other cleanup
- aquacomputer_d5next:
- Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors:
- Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors:
- Support T_Sensor on Prime X570-Pro
- Deprecate driver (replaced by new driver)
- axi-fan-control:
- Use hwmon_notify_event
- dell-smm:
- Clean up CONFIG_I8K
- disable fan type support for Inspiron 3505
- various other cleanup
- hwmon core:
- Report attribute name with udev events
- Add "label" attribute to ABI,
- Add support for pwm auto channels attribute
- max6639:
- Add regulator support
- lm70:
- Add support for TI TMP125
- lm83:
- Cleanup, convert to use with_info API
- mlxreg-fan:
- Use pwm attribute for setting fan speed low limit
- nct6775:
- Add board ID's for ASUS ROG STRIX Z390/Z490/X570-* / PRIME
X570-P, PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A
- Add support for TSI temperature registers
- occ:
- Add various new sysfs attributes
- pmbus core:
- Handle VIN unit off status
- Add regulator supply into macro
- Add get_error_flags support to regulator ops
- pmbus/adm1275:
- Allow setting sample averaging
- pmbus/lm25066:
- Add regulator support
- pmbus/xdpe12284:
- Add support for xdpe11280
- register as regulator
- powr1220:
- Convert to with_info API
- Add support for Lattice's POWR1014 power manager IC
- sch56xx:
- Cleanup and minor improvements
- sch5627:
- Add pwmX_auto_channels_temp support
- tc654:
- Add thermal_cooling device support"
* tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklist
hwmon: (pmbus) Add Vin unit off handling
hwmon: (scpi-hwmon): Use of_device_get_match_data()
hwmon: (axi-fan-control) Use hwmon_notify_event
hwmon: (vexpress-hwmon) Use of_device_get_match_data()
hwmon: Add driver for Texas Instruments TMP464 and TMP468
dt-bindings: hwmon: add tmp464.yaml
dt-bindings: hwmon: Add sample averaging properties for ADM1275
hwmon: (adm1275) Allow setting sample averaging
hwmon: (xdpe12284) Add regulator support
hwmon: (xdpe12284) Add support for xdpe11280
dt-bindings: trivial-devices: Add xdpe11280
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk 360
hwmon: (sch5627) Add pwmX_auto_channels_temp support
hwmon: (core) Add support for pwm auto channels attribute
hwmon: (lm70) Add ti,tmp125 support
dt-bindings: Add ti,tmp125 temperature sensor binding
hwmon: (pmbus/pli1209bc) Add regulator support
hwmon: (pmbus) Add support for pli1209bc
dt-bindings:trivial-devices: Add pli1209bc
...
|
||
|
Linus Torvalds
|
5628b8de12 |
Random number generator changes for Linux 5.18-rc1.
-----BEGIN PGP SIGNATURE-----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=cyDR
-----END PGP SIGNATURE-----
Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"There have been a few important changes to the RNG's crypto, but the
intent for 5.18 has been to shore up the existing design as much as
possible with modern cryptographic functions and proven constructions,
rather than actually changing up anything fundamental to the RNG's
design.
So it's still the same old RNG at its core as before: it still counts
entropy bits, and collects from the various sources with the same
heuristics as before, and so forth. However, the cryptographic
algorithms that transform that entropic data into safe random numbers
have been modernized.
Just as important, if not more, is that the code has been cleaned up
and re-documented. As one of the first drivers in Linux, going back to
1.3.30, its general style and organization was showing its age and
becoming both a maintenance burden and an auditability impediment.
Hopefully this provides a more solid foundation to build on for the
future. I encourage you to open up the file in full, and maybe you'll
remark, "oh, that's what it's doing," and enjoy reading it. That, at
least, is the eventual goal, which this pull begins working toward.
Here's a summary of the various patches in this pull:
- /dev/urandom and /dev/random now do the same thing, per the patch
we discussed on the list. I think this is worth trying out. If it
does appear problematic, I've made sure to keep it standalone and
revertible without any conflicts.
- Fixes and cleanups for numerous integer type problems, locking
issues, and general code quality concerns.
- The input pool's LFSR has been replaced with a cryptographically
secure hash function, which has security and performance benefits
alike, and consequently allows us to count entropy bits linearly.
- The pre-init injection now uses a real hash function too, instead
of an LFSR or vanilla xor.
- The interrupt handler's fast_mix() function now uses one round of
SipHash, rather than the fake crypto that was there before.
- All additions of RDRAND and RDSEED now go through the input pool's
hash function, in part to mitigate ridiculous hypothetical CPU
backdoors, but more so to have a consistent interface for ingesting
entropy that's easy to analyze, making everything happen one way,
instead of a potpourri of different ways.
- The crng now works on per-cpu data, while also being in accordance
with the actual "fast key erasure RNG" design. This allows us to
fix several boot-time race complications associated with the prior
dynamically allocated model, eliminates much locking, and makes our
backtrack protection more robust.
- Batched entropy now erases doled out values so that it's backtrack
resistant.
- Working closely with Sebastian, the interrupt handler no longer
needs to take any locks at all, as we punt the
synchronized/expensive operations to a workqueue. This is
especially nice for PREEMPT_RT, where taking spinlocks in irq
context is problematic. It also makes the handler faster for the
rest of us.
- Also working with Sebastian, we now do the right thing on CPU
hotplug, so that we don't use stale entropy or fail to accumulate
new entropy when CPUs come back online.
- We handle virtual machines that fork / clone / snapshot, using the
"vmgenid" ACPI specification for retrieving a unique new RNG seed,
which we can use to also make WireGuard (and in the future, other
things) safe across VM forks.
- Around boot time, we now try to reseed more often if enough entropy
is available, before settling on the usual 5 minute schedule.
- Last, but certainly not least, the documentation in the file has
been updated considerably"
* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (60 commits)
random: check for signal and try earlier when generating entropy
random: reseed more often immediately after booting
random: make consistent usage of crng_ready()
random: use SipHash as interrupt entropy accumulator
wireguard: device: clear keys on VM fork
random: provide notifier for VM fork
random: replace custom notifier chain with standard one
random: do not export add_vmfork_randomness() unless needed
virt: vmgenid: notify RNG of VM fork and supply generation ID
ACPI: allow longer device IDs
random: add mechanism for VM forks to reinitialize crng
random: don't let 644 read-only sysctls be written to
random: give sysctl_random_min_urandom_seed a more sensible value
random: block in /dev/urandom
random: do crng pre-init loading in worker rather than irq
random: unify cycles_t and jiffies usage and types
random: cleanup UUID handling
random: only wake up writers after zap if threshold was passed
random: round-robin registers as ulong, not u32
random: clear fast pool, crng, and batches in cpuhp bring up
...
|
||
|
Linus Torvalds
|
02b82b02c3 |
Power management updates for 5.18-rc1
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural
support for LPI to avoid using it on x86 by mistake (Mario
Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver
to work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix
up white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
-----BEGIN PGP SIGNATURE-----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=WlR9
-----END PGP SIGNATURE-----
Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
|
||
|
Linus Torvalds
|
242ba6656d |
ACPI updates for 5.18-rc1
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration
of devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=uB8P
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new functionality perspective, the most significant items
here are the new driver for the 'ARM Generic Diagnostic Dump and
Reset' device, the extension of fine grain fan control in the ACPI fan
driver, and the change making it possible to use CPPC information to
obtain CPU capacity.
There are also a few new quirks, a bunch of fixes, including the
platform-level _OSC handling change to make it actually take the
platform firmware response into account, some code and documentation
cleanups, and a notable update of the ACPI device enumeration
documentation.
Specifics:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration of
devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko)"
* tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
clocksource: acpi_pm: fix return value of __setup handler
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI: tables: Add AGDI to the list of known table signatures
ACPI/APEI: Limit printable size of BERT table data
ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
ACPI: APEI: fix return value of __setup handlers
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
ACPICA: Avoid walking the ACPI Namespace if it is not there
...
|
||
|
Linus Torvalds
|
346658a5e1 |
It has been a moderately busy cycle for documentation; some of the
highlights are:
- Numerous PDF-generation improvements
- Kees's new document with guidelines for researchers studying the
development community.
- The ongoing stream of Chinese translations
- Thorsten's new document on regression handling
- A major reworking of the internal documentation for the kernel-doc
script.
Plus the usual stream of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmI4puIPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YUnoH/RubGxsXMBcpVk0szSN/c8VEhp+QxnL6Q8NV
BtOySou5lu204awb285m4HPvuVSViHKoDObFK3fYZUjCHP8rrSymnBV8N0E0pCYm
QAgUtNcGqFk41uEkr1v4wmGCj3hIvklycOtBAite4NulHoUzpMsssf6YbajZRIt9
/PyX30jC3dVPDCZ33lYIzJRdilhoKlS5r/x2Fk/c9uOLGCsJDufHlI6PB+RA7Gpf
6kDMriIKmEU9Pq2P+Gl+tVPnrQYSSxVP8QUweObQQll2Wq/tQR/1YtecAg0RvG+g
qc3ciEpVnNHRzSP1XY6Um1FyE338cBtZckdUMgVZ+5vY0300ooA=
=wRYm
-----END PGP SIGNATURE-----
Merge tag 'docs-5.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a moderately busy cycle for documentation; some of the
highlights are:
- Numerous PDF-generation improvements
- Kees's new document with guidelines for researchers studying the
development community.
- The ongoing stream of Chinese translations
- Thorsten's new document on regression handling
- A major reworking of the internal documentation for the kernel-doc
script.
Plus the usual stream of typo fixes and such"
* tag 'docs-5.18' of git://git.lwn.net/linux: (80 commits)
docs/kernel-parameters: update description of mem=
docs/zh_CN: Add sched-nice-design Chinese translation
docs: scheduler: Convert schedutil.txt to ReST
Docs: ktap: add code-block type
docs: serial: fix a reference file name in driver.rst
docs: UML: Mention telnetd for port channel
docs/zh_CN: add damon reclaim translation
docs/zh_CN: add damon usage translation
docs/zh_CN: add admin-guide damon start translation
docs/zh_CN: add admin-guide damon index translation
docs/zh_CN: Refactoring the admin-guide directory index
zh_CN: Add translation for admin-guide/mm/index.rst
zh_CN: Add translations for admin-guide/mm/ksm.rst
Add Chinese translation for vm/ksm.rst
docs/zh_CN: Add sched-stats Chinese translation
docs/zh_CN: add devicetree of_unittest translation
docs/zh_CN: add devicetree usage-model translation
docs/zh_CN: add devicetree index translation
Documentation: describe how to apply incremental stable patches
docs/zh_CN: add peci subsystem translation
...
|
||
|
Linus Torvalds
|
35dc0352bb |
RCU pull request for v5.18
This pull request contains the following branches: exp.2022.02.24a: Contains a fix for idle detection from Neeraj Upadhyay and missing access marking detected by KCSAN. fixes.2022.02.14a: Miscellaneous fixes. rcu_barrier.2022.02.08a: Reduces coupling between rcu_barrier() and CPU-hotplug operations, so that rcu_barrier() no longer needs to do cpus_read_lock(). This may also someday allow system boot to bring CPUs online concurrently. rcu-tasks.2022.02.08a: Enable more aggressive movement to per-CPU queueing when reacting to excessive lock contention due to workloads placing heavy update-side stress on RCU tasks. rt.2022.02.01b: Improvements to RCU priority boosting, including changes from Neeraj Upadhyay, Zqiang, and Alison Chaiken. torture.2022.02.01b: Various fixes improving test robustness and debug information. torturescript.2022.02.08a: Add tests for SRCU size transitions, further compress torture.sh build products, and improve debug output. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmIusb0THHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jAklD/9VXLK7crcg2YeRXUIg1IOdnancsVCV MNtTfxNYqYIis+W2UfuHKuQu2yEXF5fihdY0J9TQv0byHsprp6FIZT+i1An4Ukgd 0vyHjd/DaIKgs2txsB1DjhlatWlJUfQuBwhtNUkpYFLFwKdCI1l813bPbNlL+GiL p0ZejVMpBC5HgE6sDOtaaQSAB+AEUp+Lgr+yaG/On8hfzwWFKO8KldxhiKY9n07v SNDfKDgXB+80hx4RBVGbkuogV3s9brFULoNRXJy7Uf79DtiY09uazhhA3G0TjO34 zGwmF91dqsXDF/Uz8g4aZO0xYRXUchOrsQ5lgO/GhTVbM9I0wWlMHEk/8WHyBJkU vlXOMuwzBc9/5uwZE3rnkA4a3nkXhPQjLlCr+/I7A/7Vsv9IBW9WSlgMvUN0Qf4S XAwTnIqfErnR60a+L0+HRr5kIV5VoXcxqI/Nv0/4/BMLRubS/c7cYjOTxXNJL9SU 50pv5vty9xk3HSpuz0JAOyLf+PUT773uUQhFr5xCBSCVqbAm5WFg6hWPAgrN/tUS wstBc0wlA73rKVJxeLDQwHc/oT1zTUEzswVZITQ5zLHK0t0GbeR6QHccsdeaJyTe DisX+66A6YQrEuJmx5xUZqjYHqtYLDOBTbHA3ZwQmvjKu8ibWZ8Fg9ioURLCS4bF +FVkp/5KdcAN9w== =ljVY -----END PGP SIGNATURE----- Merge tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Fix idle detection (Neeraj Upadhyay) and missing access marking detected by KCSAN. - Reduce coupling between rcu_barrier() and CPU-hotplug operations, so that rcu_barrier() no longer needs to do cpus_read_lock(). This may also someday allow system boot to bring CPUs online concurrently. - Enable more aggressive movement to per-CPU queueing when reacting to excessive lock contention due to workloads placing heavy update-side stress on RCU tasks. - Improvements to RCU priority boosting, including changes from Neeraj Upadhyay, Zqiang, and Alison Chaiken. - Various fixes improving test robustness and debug information. - Add tests for SRCU size transitions, further compress torture.sh build products, and improve debug output. - Miscellaneous fixes. * tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits) rcu: Replace cpumask_weight with cpumask_empty where appropriate rcu: Remove __read_mostly annotations from rcu_scheduler_active externs rcu: Uninline multi-use function: finish_rcuwait() rcu: Mark writes to the rcu_segcblist structure's ->flags field kasan: Record work creation stack trace with interrupts enabled rcu: Inline __call_rcu() into call_rcu() rcu: Add mutex for rcu boost kthread spawning and affinity setting rcu: Fix description of kvfree_rcu() MAINTAINERS: Add Frederic and Neeraj to their RCU files rcutorture: Provide non-power-of-two Tasks RCU scenarios rcutorture: Test SRCU size transitions torture: Make torture.sh help message match reality rcu-tasks: Set ->percpu_enqueue_shift to zero upon contention rcu-tasks: Use order_base_2() instead of ilog2() rcu: Create and use an rcu_rdp_cpu_online() rcu: Make rcu_barrier() no longer block CPU-hotplug operations rcu: Rework rcu_barrier() and callback-migration logic rcu: Refactor rcu_barrier() empty-list handling rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion torture: Change KVM environment variable to RCUTORTURE ... |
||
|
Linus Torvalds
|
356a1adca8 |
arm64 updates for 5.18
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmIvta8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNAIhB/oDSva5FryAFExVuIB+mqRkbZO9kj6fy/5J
ctN9LEVO2GI/U1TVAUWop1lXmP8Kbq5UCZOAuY8sz7dAZs7NRUWkwTrXVhaTpi6L
oxCfu5Afu76d/TGgivNz+G7/ewIJRFj5zCPmHezLF9iiWPUkcAsP0XCp4a0iOjU4
04O4d7TL/ap9ujEes+U0oEXHnyDTPrVB2OVE316FKD1fgztcjVJ2U+TxX5O4xitT
PPIfeQCjQBq1B2OC1cptE3wpP+YEr9OZJbx+Ieweidy1CSInEy0nZ13tLoUnGPGU
KPhsvO9daUCbhbd5IDRBuXmTi/sHU4NIB8LNEVzT1mUPnU8pCizv
=ziGg
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
|
||
|
Rafael J. Wysocki
|
ec3d8b8365 |
Merge branch 'pm-tools'
Merge power management utilities changes for 5.18-rc1:
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
* pm-tools:
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
turbostat: fix PC6 displaying on some systems
cpupower: Add "perf" option to print AMD P-State information
cpupower: Add function to print AMD P-State performance capabilities
cpupower: Move print_speed function into misc helper
cpupower: Enable boost state support for AMD P-State module
cpupower: Add AMD P-State sysfs definition and access helper
cpupower: Introduce ACPI CPPC library
cpupower: Add the function to get the sysfs value from specific table
cpupower: Initial AMD P-State capability
cpupower: Add the function to check AMD P-State enabled
cpupower: Add AMD P-State capability flag
tools/power/cpupower/{ToDo => TODO}: Rename the todo file
tools: cpupower: fix typo in cpupower-idle-set(1) manpage
|
||
|
Rafael J. Wysocki
|
24b2b094b5 |
Merge branches 'acpi-ec', 'acpi-cppc', 'acpi-fan' and 'acpi-battery'
Merge ACPI EC driver changes, CPPC-related changes, ACPI fan driver changes and ACPI battery driver changes for 5.18-rc1: - Make wakeup events checks in the ACPI EC driver more straightforward and clean up acpi_ec_submit_event() (Rafael Wysocki). - Make it possible to obtain the CPU capacity with the help of CPPC information (Ionela Voinescu). - Improve fine grained fan control in the ACPI fan driver and document it (Srinivas Pandruvada). - Add device HID and quirk for Microsoft Surface Go 3 to the ACPI battery driver (Maximilian Luz). * acpi-ec: ACPI: EC: Rearrange code in acpi_ec_submit_event() ACPI: EC: Reduce indentation level in acpi_ec_submit_event() ACPI: EC: Do not return result from advance_transaction() * acpi-cppc: arm64, topology: enable use of init_cpu_capacity_cppc() arch_topology: obtain cpu capacity using information from CPPC x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc() * acpi-fan: Documentation/admin-guide/acpi: Add documentation for fine grain control ACPI: fan: Add additional attributes for fine grain control ACPI: fan: Properly handle fine grain control ACPI: fan: Optimize struct acpi_fan_fif ACPI: fan: Separate file for attributes creation ACPI: fan: Fix error reporting to user space * acpi-battery: ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3 |
||
|
Mauro Carvalho Chehab
|
ceafdaac46 |
media: platform: rename omap3isp/ to ti/omap3isp/
As the end goal is to have platform drivers split by vendor, rename omap3isp/ to ti/omap3isp/. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Mauro Carvalho Chehab
|
238c84f711 |
media: platform: rename exynos4-is/ to samsung/exynos4-is/
As the end goal is to have platform drivers split by vendor, rename exynos4-is/ to samsung/exynos4-is/. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Mike Rapoport
|
75c05fabb8 |
docs/kernel-parameters: update description of mem=
The existing description of mem= does not cover all the cases and differences between how architectures treat it. Extend the description to match the code. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/r/20220310082736.1346366-1-rppt@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |