IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
if sch_fq is configured with "initial quantum" having values greater than
INT_MAX, the first assignment of "credit" does signed integer overflow to
a very negative value.
In this situation, the syzkaller script provided by Cristoph triggers the
CPU soft-lockup warning even with few sockets. It's not an infinite loop,
but "credit" wasn't probably meant to be minus 2Gb for each new flow.
Capping "initial quantum" to INT_MAX proved to fix the issue.
v2: validation of "initial quantum" is done in fq_policy, instead of open
coding in fq_change() _ suggested by Jakub Kicinski
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7b3a3c7e36d03068707a021760a194a8eb5ad41a.1682002300.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Relax netdev chain creation to allow for loading the ruleset, then
adding/deleting devices at a later stage. Hardware offload does not
support for this feature yet.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Rename nft_flowtable_hooks_destroy() by nft_hooks_destroy() to prepare
for netdev chain device updates.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In most cases, table, name and handle is sufficient for userspace to
identify an object that has been deleted. Skipping unneeded fields in
the netlink attributes in the message saves bandwidth (ie. less chances
of hitting ENOBUFS).
Rules are an exception: the existing userspace monitor code relies on
the rule definition. This exception can be removed by implementing a
rule cache in userspace, this is already supported by the tracing
infrastructure.
Regarding flowtables, incremental deletion of devices is possible.
Skipping a full notification allows userspace to differentiate between
flowtable removal and incremental removal of devices.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Flowtable and netdev chains are bound to one or several netdevice,
extend netlink error reporting to specify the the netdevice that
triggers the error.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove EnterFunction and LeaveFunction.
These debugging macros seem well past their use-by date. And seem to
have little value these days. Removing them allows some trivial cleanup
of some exit paths for some functions. These are also included in this
patch. There is likely scope for further cleanup of both debugging and
unwind paths. But let's leave that for another day.
Only intended to change debug output, and only when CONFIG_IP_VS_DEBUG
is enabled. Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Consistently use array_size() to calculate the size of ip_vs_conn_tab
in bytes.
Flagged by Coccinelle:
WARNING: array_size is already used (line 1498) to compute the same size
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In ip_vs_sync_conn_v0() copy is made to struct ip_vs_sync_conn_options.
That structure looks like this:
struct ip_vs_sync_conn_options {
struct ip_vs_seq in_seq;
struct ip_vs_seq out_seq;
};
The source of the copy is the in_seq field of struct ip_vs_conn. Whose
type is struct ip_vs_seq. Thus we can see that the source - is not as
wide as the amount of data copied, which is the width of struct
ip_vs_sync_conn_option.
The copy is safe because the next field in is another struct ip_vs_seq.
Make use of struct_group() to annotate this.
Flagged by gcc-13 as:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/timex.h:5,
from ./include/linux/timex.h:67,
from ./include/linux/time32.h:13,
from ./include/linux/time.h:60,
from ./include/linux/stat.h:19,
from ./include/linux/module.h:13,
from net/netfilter/ipvs/ip_vs_sync.c:38:
In function 'fortify_memcpy_chk',
inlined from 'ip_vs_sync_conn_v0' at net/netfilter/ipvs/ip_vs_sync.c:606:3:
./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
529 | __read_overflow2_field(q_size_field, size);
|
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pass it as argument instead. This reduces size of traceinfo to
16 bytes. Total stack usage:
nf_tables_core.c:252 nft_do_chain 304 static
While its possible to also pass basechain as argument, doing so
increases nft_do_chaininfo function size.
Unlike pktinfo/verdict/rule the basechain info isn't used in
the expression evaluation path. gcc places it on the stack, which
results in extra push/pop when it gets passed to the trace helpers
as argument rather than as part of the traceinfo structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just pass it as argument to nft_trace_notify. Stack is reduced by 8 bytes:
nf_tables_core.c:256 nft_do_chain 312 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pass it as argument. No change in object size.
stack usage decreases by 8 byte:
nf_tables_core.c:254 nft_do_chain 320 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This helper is inlined, so keep it as small as possible.
If the static key is true, there is only a very small chance
that info->trace is false:
1. tracing was enabled at this very moment, the static key was
updated to active right after nft_do_table was called.
2. tracing was disabled at this very moment.
trace->info is already false, the static key is about to
be patched to false soon.
In both cases, no event will be sent because info->trace
is false (checked in noinline slowpath). info->nf_trace is irrelevant.
The nf_trace update is redunant in this case, but this will only
happen for short duration, when static key flips.
text data bss dec hex filename
old: 2980 192 32 3204 c84 nf_tables_core.o
new: 2964 192 32 3188 c74i nf_tables_core.o
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We only need to validate tables that saw changes in the current
transaction.
The existing code revalidates all tables, but this isn't needed as
cross-table jumps are not allowed (chains have table scope).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ->cleanup callback needs to be removed, this doesn't work anymore as
the transaction mutex is already released in the ->abort function.
Just do it after a successful validation pass, this either happens
from commit or abort phases where transaction mutex is held.
Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that the rule trailer/end marker and the rcu head reside in the
same structure, we no longer need to save/restore the chain pointer
when performing/returning from a jump.
We can simply let the trace infra walk the evaluated rule until it
hits the end marker and then fetch the chain pointer from there.
When the rule is NULL (policy tracing), then chain and basechain
pointers were already identical, so just use the basechain.
This cuts size of jumpstack in half, from 256 to 128 bytes in 64bit,
scripts/stackusage says:
nf_tables_core.c:251 nft_do_chain 328 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Walk the rule headers until the trailer one (last_bit flag set) instead
of stopping at last_rule address.
This avoids the need to store the address when jumping to another chain.
This cuts size of jumpstack array by one third, on 64bit from
384 to 256 bytes. Still, stack usage is still quite large:
scripts/stackusage:
nf_tables_core.c:258 nft_do_chain 496 static
Next patch will also remove chain pointer.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In order to free the rules in a chain via call_rcu, the rule array used
to stash a rcu_head and space for a pointer at the end of the rule array.
When the current nft_rule_dp blob format got added in
2c865a8a28a1 ("netfilter: nf_tables: add rule blob layout"), this results
in a double-trailer:
size (unsigned long)
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp (is_last=1) // Trailer
The trailer, struct nft_rule_dp (is_last=1), is not accounted for in size,
so it can be located via start_addr + size.
Because the rcu_head is stored after 'start+size' as well this means the
is_last trailer is *aliased* to the rcu_head (struct nft_rules_old).
This is harmless, because at this time the nft_do_chain function never
evaluates/accesses the trailer, it only checks the address boundary:
for (; rule < last_rule; rule = nft_rule_next(rule)) {
...
But this way the last_rule address has to be stashed in the jump
structure to restore it after returning from a chain.
nft_do_chain stack usage has become way too big, so put it on a diet.
Without this patch is impossible to use
for (; !rule->is_last; rule = nft_rule_next(rule)) {
... because on free, the needed update of the rcu_head will clobber the
nft_rule_dp is_last bit.
Furthermore, also stash the chain pointer in the trailer, this allows
to recover the original chain structure from nf_tables_trace infra
without a need to place them in the jump struct.
After this patch it is trivial to diet the jump stack structure,
done in the next two patches.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
add glue code so a bpf program can be run using userspace-provided
netfilter state and packet/skb.
Default is to use ipv4:output hook point, but this can be overridden by
userspace. Userspace provided netfilter state is restricted, only hook and
protocol families can be overridden and only to ipv4/ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is just to avoid ordering issues between multiple bpf programs,
this could be removed later in case it turns out to be too cautious.
bpf prog could still be shared with non-bpf hook, otherwise we'd have to
make conntrack hook registration fail just because a bpf program has
same priority.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-5-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This allows userspace ("nft list hooks") to show which bpf program
is attached to which hook.
Without this, user only knows bpf prog is attached at prio
x, y, z at INPUT and FORWARD, but can't tell which program is where.
v4: kdoc fixups (Simon Horman)
Link: https://lore.kernel.org/bpf/ZEELzpNCnYJuZyod@corigine.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-4-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs
that will be invoked via the NF_HOOK() points in the ip stack.
Invocation incurs an indirect call. This is not a necessity: Its
possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the
program invocation with the same method already done for xdp progs.
This isn't done here to keep the size of this chunk down.
Verifier restricts verdicts to either DROP or ACCEPT.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_link support skeleton. To keep this reviewable, no bpf program
can be invoked yet, if a program is attached only a c-stub is called and
not the actual bpf program.
Defaults to 'y' if both netfilter and bpf syscall are enabled in kconfig.
Uapi example usage:
union bpf_attr attr = { };
attr.link_create.prog_fd = progfd;
attr.link_create.attach_type = 0; /* unused */
attr.link_create.netfilter.pf = PF_INET;
attr.link_create.netfilter.hooknum = NF_INET_LOCAL_IN;
attr.link_create.netfilter.priority = -128;
err = bpf(BPF_LINK_CREATE, &attr, sizeof(attr));
... this would attach progfd to ipv4:input hook.
Such hook gets removed automatically if the calling program exits.
BPF_NETFILTER program invocation is added in followup change.
NF_HOOK_OP_BPF enum will eventually be read from nfnetlink_hook, it
allows to tell userspace which program is attached at the given hook
when user runs 'nft hook list' command rather than just the priority
and not-very-helpful 'this hook runs a bpf prog but I can't tell which
one'.
Will also be used to disallow registration of two bpf programs with
same priority in a followup patch.
v4: arm32 cmpxchg only supports 32bit operand
s/prio/priority/
v3: restrict prog attachment to ip/ip6 for now, lets lift restrictions if
more use cases pop up (arptables, ebtables, netdev ingress/egress etc).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-2-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ck6R
-----END PGP SIGNATURE-----
Merge tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Set on IPS_CONFIRMED before change_status() otherwise EBUSY is
bogusly hit. This bug was introduced in the 6.3 release cycle.
2) Fix nfnetlink_queue conntrack support: Set/dump timeout
accordingly for unconfirmed conntrack entries. Make sure this
is done after IPS_CONFIRMED is set on. This is an old bug, it
happens since the introduction of this feature.
* tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix wrong ct->timeout value
netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()
====================
Link: https://lore.kernel.org/r/20230421105700.325438-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
* fix some Fine Time Measurement (FTM) frames not being bufferable
* flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
* preparation for Wi-Fi 7 EHT and multi-link support
rtw88
* SDIO bus support
* RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
* framework firmware backwards compatibility
brcmfmac
* Cypress 43439 SDIO support
mt76
* mt7921 P2P support
* mt7996 mesh A-MSDU support
* mt7996 EHT support
* mt7996 coredump support
wcn36xx
* support for pronto v3 hardware
ath11k
* PCIe DeviceTree bindings
* WCN6750: enable SAR support
ath10k
* convert DeviceTree bindings to YAML
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmRCaTURHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvcRwf+NcLS4HbmqGZhBxl2LZVZ6AFCBM4ijDlO
pxdMiC4UxT+UApY1/9YXo0VS97M7paDJH+R/g1HcTvvKURHCmsdhYHm+R1MH+/uD
r8RfvJg4VtNnlUpsJh9jxt+e697KP15M7DF0sFlQzdIoTUl13Hp7YhI76zunAbAN
u1FBcVVJiCcJWbLolMzqAeBMUWUEG+GtHF6Zn5kChVU/p1nmwJMPUG3Qvb61a7Yc
BM1pQX8jQ8PBj+VrGPGvqX0BOdbxq0evauYScq2oTOhQ1fzTNWOsI1yI7AwApptR
itwQ2t1UK/C/EWpvWIBSd0nit1uwSx0Zsu/nSZlbKbrvIFwd5XnfwQ==
=Irrd
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.4
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
- fix some Fine Time Measurement (FTM) frames not being bufferable
- flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
- preparation for Wi-Fi 7 EHT and multi-link support
rtw88
- SDIO bus support
- RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
- framework firmware backwards compatibility
brcmfmac
- Cypress 43439 SDIO support
mt76
- mt7921 P2P support
- mt7996 mesh A-MSDU support
- mt7996 EHT support
- mt7996 coredump support
wcn36xx
- support for pronto v3 hardware
ath11k
- PCIe DeviceTree bindings
- WCN6750: enable SAR support
ath10k
- convert DeviceTree bindings to YAML
* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
wifi: rtw88: Update spelling in main.h
wifi: airo: remove ISA_DMA_API dependency
wifi: rtl8xxxu: Simplify setting the initial gain
wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
wifi: rtl8xxxu: Don't print the vendor/product/serial
wifi: rtw88: Fix memory leak in rtw88_usb
wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
wifi: rtw88: rtw8821c: Fix rfe_option field width
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: 8822c: add iface combination
wifi: rtw88: handle station mode concurrent scan with AP mode
wifi: rtw88: prevent scan abort with other VIFs
wifi: rtw88: refine reserved page flow for AP mode
wifi: rtw88: disallow PS during AP mode
wifi: rtw88: 8822c: extend reserved page number
wifi: rtw88: add port switch for AP mode
wifi: rtw88: add bitmap for dynamic port settings
wifi: rtw89: mac: use regular int as return type of DLE buffer request
wifi: mac80211: remove return value check of debugfs_create_dir()
...
====================
Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packet sockets, like tap, can be used as the backend for kernel vhost.
In packet sockets, virtio net header size is currently hardcoded to be
the size of struct virtio_net_hdr, which is 10 bytes; however, it is not
always the case: some virtio features, such as mrg_rxbuf, need virtio
net header to be 12-byte long.
Mergeable buffers, as a virtio feature, is worthy of supporting: packets
that are larger than one-mbuf size will be dropped in vhost worker's
handle_rx if mrg_rxbuf feature is not used, but large packets
cannot be avoided and increasing mbuf's size is not economical.
With this virtio feature enabled by virtio-user, packet sockets with
hardcoded 10-byte virtio net header will parse mac head incorrectly in
packet_snd by taking the last two bytes of virtio net header as part of
mac header.
This incorrect mac header parsing will cause packet to be dropped due to
invalid ether head checking in later under-layer device packet receiving.
By adding extra field vnet_hdr_sz with utilizing holes in struct
packet_sock to record currently used virtio net header size and supporting
extra sockopt PACKET_VNET_HDR_SZ to set specified vnet_hdr_sz, packet
sockets can know the exact length of virtio net header that virtio user
gives.
In packet_snd, tpacket_snd and packet_recvmsg, instead of using
hardcoded virtio net header size, it can get the exact vnet_hdr_sz from
corresponding packet_sock, and parse mac header correctly based on this
information to avoid the packets being mistakenly dropped.
Signed-off-by: Jianfeng Tan <henry.tjf@antgroup.com>
Co-developed-by: Anqi Shen <amy.saq@antgroup.com>
Signed-off-by: Anqi Shen <amy.saq@antgroup.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new bridge port attribute that allows user space to enable
per-{Port, VLAN} neighbor suppression. Example:
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false
# bridge link set dev swp1 neigh_vlan_suppress on
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
true
# bridge link set dev swp1 neigh_vlan_suppress off
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new VLAN attribute that allows user space to set the neighbor
suppression state of the port VLAN. Example:
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
false
# bridge vlan set vid 10 dev swp1 neigh_suppress on
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
true
# bridge vlan set vid 10 dev swp1 neigh_suppress off
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
false
# bridge vlan set vid 10 dev br0 neigh_suppress on
Error: bridge: Can't set neigh_suppress for non-port vlans.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the bridge is not VLAN-aware (i.e., VLAN ID is 0), determine if
neighbor suppression is enabled on a given bridge port solely based on
the existing 'BR_NEIGH_SUPPRESS' flag.
Otherwise, if the bridge is VLAN-aware, first check if per-{Port, VLAN}
neighbor suppression is enabled on the given bridge port using the
'BR_NEIGH_VLAN_SUPPRESS' flag. If so, look up the VLAN and check whether
it has neighbor suppression enabled based on the per-VLAN
'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED' flag.
If the bridge is VLAN-aware, but the bridge port does not have
per-{Port, VLAN} neighbor suppression enabled, then fallback to
determine neighbor suppression based on the 'BR_NEIGH_SUPPRESS' flag.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there are various places in the bridge data path that check
whether neighbor suppression is enabled on a given bridge port.
As a preparation for per-{Port, VLAN} neighbor suppression, encapsulate
this logic in a function and pass the VLAN ID of the packet as an
argument.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge driver gates the neighbor suppression code behind an internal
per-bridge flag called 'BROPT_NEIGH_SUPPRESS_ENABLED'. The flag is set
when at least one bridge port has neighbor suppression enabled.
As a preparation for per-{Port, VLAN} neighbor suppression, make sure
the global flag is also set if per-{Port, VLAN} neighbor suppression is
enabled. That is, when the 'BR_NEIGH_VLAN_SUPPRESS' flag is set on at
least one bridge port.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two internal flags that will be used to enable / disable per-{Port,
VLAN} neighbor suppression:
1. 'BR_NEIGH_VLAN_SUPPRESS': A per-port flag used to indicate that
per-{Port, VLAN} neighbor suppression is enabled on the bridge port.
When set, 'BR_NEIGH_SUPPRESS' has no effect.
2. 'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED': A per-VLAN flag used to indicate
that neighbor suppression is enabled on the given VLAN.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subsequent patches are going to add per-{Port, VLAN} neighbor
suppression, which will require br_flood() to potentially suppress ARP /
NS packets on a per-{Port, VLAN} basis.
As a preparation, pass the VLAN ID of the packet as another argument to
br_flood().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge does not flood ARP / NS packets for which a reply was sent to
bridge ports that have neighbor suppression enabled.
Subsequent patches are going to add per-{Port, VLAN} neighbor
suppression, which is going to make it more expensive to check whether
neighbor suppression is enabled since a VLAN lookup will be required.
Therefore, instead of unnecessarily performing this lookup for every
packet, only perform it for ARP / NS packets for which a reply was sent.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for MACsec offload operations for VLAN driver
to allow offloading MACsec when VLAN's real device supports
Macsec offload by forwarding the offload request to it.
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array hmac[] from the structure
sctp_authhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/auth.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:735:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array peer_init[] from the structure
sctp_cookie to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/sm_make_chunk.c: note: in included file (through include/net/sctp/sctp.h):
./include/net/sctp/structs.h:1588:28: warning: nested flexible array
./include/net/sctp/structs.h:343:28: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array variable[] from the structure
sctp_sackhdr and sctp_errhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/sm_statefuns.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:451:28: warning: nested flexible array
./include/linux/sctp.h:393:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array skip[] from the structure
sctp_ifwdtsn/fwdtsn_hdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/stream_interleave.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:611:32: warning: nested flexible array
./include/linux/sctp.h:628:33: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array params[] from the structure
sctp_inithdr, sctp_addiphdr and sctp_reconf_chunk to avoid some
sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/input.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:278:29: warning: nested flexible array
./include/linux/sctp.h:675:30: warning: nested flexible array
This warning is reported if a structure having a flexible array
member is included by other structures.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be really hard to analyse or debug why packets are
going missing in mac80211, so add the needed infrastructure
to use use the new per-subsystem drop reasons.
We actually use two drop reason subsystems here because of
the different handling of frames that are dropped but still
go to monitor for old versions of hostapd, and those that
are just completely unusable (e.g. crypto failed.)
Annotate a few reasons here just to illustrate this, we'll
need to go through and annotate more of them later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend drop reasons to make them usable by subsystems
other than core by reserving the high 16 bits for a
new subsystem ID, of which 0 of course is used for the
existing reasons immediately.
To still be able to have string reasons, restructure
that code a bit to make the loopup under RCU, the only
user of this (right now) is drop_monitor.
Link: https://lore.kernel.org/netdev/00659771ed54353f92027702c5bbb84702da62ce.camel@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The verify-enabled boolean (ETHTOOL_A_MM_VERIFY_ENABLED) was intended to
be a sub-setting of tx-enabled (ETHTOOL_A_MM_TX_ENABLED). IOW, MAC Merge
TX can be enabled with or without verification, but verification with TX
disabled makes no sense.
The pmac-enabled boolean (ETHTOOL_A_MM_PMAC_ENABLED) was intended to be
a global toggle from an API perspective, whereas tx-enabled just handles
the TX direction. IOW, the pMAC can be enabled with or without TX, but
it doesn't make sense to enable TX if the pMAC is not enabled.
Add two checks which sanitize and reject these invalid cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lookups by descriptor are better off closer to syscall surface...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__kfree_skb_defer() uses the old naming where "defer" meant
slab bulk free/alloc APIs. In the meantime we also made
__kfree_skb_defer() feed the per-NAPI skb cache, which
implies bulk APIs. So take away the 'defer' and add 'napi'.
While at it add a drop reason. This only matters on the
tx_action path, if the skb has a frag_list. But getting
rid of a SKB_DROP_REASON_NOT_SPECIFIED seems like a net
benefit so why not.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230420020005.815854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jesper points out that we must prevent recycling into cache
after page_pool_destroy() is called, because page_pool_destroy()
is not synchronized with recycling (some pages may still be
outstanding when destroy() gets called).
I assumed this will not happen because NAPI can't be scheduled
if its page pool is being destroyed. But I missed the fact that
NAPI may get reused. For instance when user changes ring configuration
driver may allocate a new page pool, stop NAPI, swap, start NAPI,
and then destroy the old pool. The NAPI is running so old page
pool will think it can recycle to the cache, but the consumer
at that point is the destroy() path, not NAPI.
To avoid extra synchronization let the drivers do "unlinking"
during the "swap" stage while NAPI is indeed disabled.
Fixes: 8c48eea3adf3 ("page_pool: allow caching from safely localized NAPI")
Reported-by: Jesper Dangaard Brouer <jbrouer@redhat.com>
Link: https://lore.kernel.org/all/e8df2654-6a5b-3c92-489d-2fe5e444135f@redhat.com/
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20230419182006.719923-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
