IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since full-mesh endpoint support, the reception of a single ADD_ADDR
option can cause multiple subflows creation. When such option is
accepted we increment 'add_addr_accepted' by one. When we received
a paired RM_ADDR option, we deleted all the relevant subflows,
decrementing 'add_addr_accepted' by one for each of them.
We have a similar issue for 'local_addr_used'
Fix them moving the pm endpoint accounting outside the subflow
traversal.
Fixes: 1a0d6136c5f0 ("mptcp: local addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle explicitly AF_UNSPEC in mptcp_stream_connnect() to
allow user-space to disconnect established MPTCP connections
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, msk->subflow will never be deleted during
the whole msk lifetime. We don't need anymore to acquire references to
it in mptcp_stream_accept() and we can use the listener subflow accept
queue to simplify mptcp_poll() for listener socket.
Overall this removes a lock pair and 4 more atomic operations per
accept().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp_disconnect() implementation lacks several
steps, we additionally need to reset the msk socket state
and flush the subflow list.
Factor out the needed helper to avoid code duplication.
Additionally ensure that the initial subflow is disposed
only after mptcp_close(), just reset it at disconnect time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the MPTCP xmit path to add MP_FASTCLOSE suboption
on RST egress packets.
Additionally reorder related options writing to reduce
the number of conditionals required in the fast path.
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After shutdown, for fallback MPTCP sockets, we always have
write_seq == snd_una+1
The above will foul OUTQ ioctl(). Keep snd_una in sync with
write_seq even after shutdown.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This copies a u16 into the high bits of an int, which works on a big
endian system but not on a little endian system.
Fixes: 09572fca7223 ("Bluetooth: hci_sock: Add support for BT_{SND,RCV}BUF")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The "opt" variable is a u32, but on some paths only the top bytes
were initialized and the others contained random stack data.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Refcount leak in ipt_CLUSTERIP rule loading path, from Xin Xiong.
2) Use socat in netfilter selftests, from Hangbin Liu.
3) Skip layer checksum 4 update for IP fragments.
4) Missing allocation of pcpu scratch maps on clone in
nft_set_pipapo, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone
netfilter: nft_payload: do not update layer 4 checksum when mangling fragments
selftests: netfilter: switch to socat for tests using -q option
netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()
====================
Link: https://lore.kernel.org/r/20220106215139.170824-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-01-06
We've added 41 non-merge commits during the last 2 day(s) which contain
a total of 36 files changed, 1214 insertions(+), 368 deletions(-).
The main changes are:
1) Various fixes in the verifier, from Kris and Daniel.
2) Fixes in sockmap, from John.
3) bpf_getsockopt fix, from Kuniyuki.
4) INET_POST_BIND fix, from Menglong.
5) arm64 JIT fix for bpf pseudo funcs, from Hou.
6) BPF ISA doc improvements, from Christoph.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
bpf: selftests: Add bind retry for post_bind{4, 6}
bpf: selftests: Use C99 initializers in test_sock.c
net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND()
bpf/selftests: Test bpf_d_path on rdonly_mem.
libbpf: Add documentation for bpf_map batch operations
selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3
xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames
xdp: Move conversion to xdp_frame out of map functions
page_pool: Store the XDP mem id
page_pool: Add callback to init pages when they are allocated
xdp: Allow registering memory model without rxq reference
samples/bpf: xdpsock: Add timestamp for Tx-only operation
samples/bpf: xdpsock: Add time-out for cleaning Tx
samples/bpf: xdpsock: Add sched policy and priority support
samples/bpf: xdpsock: Add cyclic TX operation capability
samples/bpf: xdpsock: Add clockid selection support
samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operation
samples/bpf: xdpsock: Add VLAN support for Tx-only operation
libbpf 1.0: Deprecate bpf_object__find_map_by_offset() API
libbpf 1.0: Deprecate bpf_map__is_offload_neutral()
...
====================
Link: https://lore.kernel.org/r/20220107013626.53943-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in
__inet_bind() is not handled properly. While the return value
is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and
exit:
err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk);
if (err) {
inet->inet_saddr = inet->inet_rcv_saddr = 0;
goto out_release_sock;
}
Let's take UDP for example and see what will happen. For UDP
socket, it will be added to 'udp_prot.h.udp_table->hash' and
'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port()
called success. If 'inet->inet_rcv_saddr' is specified here,
then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong
to (because inet_saddr is changed to 0), and UDP packet received
will not be passed to this sock. If 'inet->inet_rcv_saddr' is not
specified here, the sock will work fine, as it can receive packet
properly, which is wired, as the 'bind()' is already failed.
To undo the get_port() operation, introduce the 'put_port' field
for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP
proto, it is udp_lib_unhash(); For icmp proto, it is
ping_unhash().
Therefore, after sys_bind() fail caused by
BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which
means that it can try to be binded to another port.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220106132022.3470772-2-imagedong@tencent.com
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the sunrpc sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In g_verify_token_header, the null check of 'ret'
is unneeded to be done twice.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This rework the handling of hci_inquiry_result_with_rssi_evt to not use
a union to represent the different inquiry responses.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
SMC connections might fail to be registered in a link group due to
unable to find a usable link during its creation. As a result,
smc_conn_create() will return a failure and most resources related
to the connection won't be applied or initialized, such as
conn->abort_work or conn->lnk.
If smc_conn_free() is invoked later, it will try to access the
uninitialized resources related to the connection, thus causing
a warning or crash.
This patch tries to fix this by resetting conn->lgr to NULL if an
abnormal exit occurs in smc_lgr_register_conn(), thus avoiding the
access to uninitialized resources in smc_conn_free().
Meanwhile, the new created link group should be terminated if smc
connections can't be registered in it. So smc_lgr_cleanup_early() is
modified to take care of link group only and invoked to terminate
unusable link group by smc_conn_create(). The call to smc_conn_free()
is moved out from smc_lgr_cleanup_early() to smc_conn_abort().
Fixes: 56bc3b2094b4 ("net/smc: assign link to a new connection")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ethtool_get_phy_stats(), the phydev varaible is set to
dev->phydev but dev->phydev is still used. Replace
dev->phydev uses with phydev.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet suggested to allow users to modify max GRO packet size.
We have seen GRO being disabled by users of appliances (such as
wifi access points) because of claimed bufferbloat issues,
or some work arounds in sch_cake, to split GRO/GSO packets.
Instead of disabling GRO completely, one can chose to limit
the maximum packet size of GRO packets, depending on their
latency constraints.
This patch adds a per device gro_max_size attribute
that can be changed with ip link command.
ip link set dev eth0 gro_max_size 16000
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When multiple sockets using the SOF_TIMESTAMPING_BIND_PHC flag received
a packet with a hardware timestamp (e.g. multiple PTP instances in
different PTP domains using the UDPv4/v6 multicast or L2 transport),
the timestamps received on some sockets were corrupted due to repeated
conversion of the same timestamp (by the same or different vclocks).
Fix ptp_convert_timestamp() to not modify the shared skb timestamp
and return the converted timestamp as a ktime_t instead. If the
conversion fails, return 0 to not confuse the application with
timestamps corresponding to an unexpected PHC.
Fixes: d7c088265588 ("net: socket: support hardware timestamp conversion to PHC bound")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is said that as soon as a network interface is registered, all its
resources should have already been prepared, so that it is available for
sending and receiving traffic. One of the resources needed by a DSA
slave interface is the master.
dsa_tree_setup
-> dsa_tree_setup_ports
-> dsa_port_setup
-> dsa_slave_create
-> register_netdevice
-> dsa_tree_setup_master
-> dsa_master_setup
-> sets up master->dsa_ptr, which enables reception
Therefore, there is a short period of time after register_netdevice()
during which the master isn't prepared to pass traffic to the DSA layer
(master->dsa_ptr is checked by eth_type_trans). Same thing during
unregistration, there is a time frame in which packets might be missed.
Note that this change opens us to another race: dsa_master_find_slave()
will get invoked potentially earlier than the slave creation, and later
than the slave deletion. Since dp->slave starts off as a NULL pointer,
the earlier calls aren't a problem, but the later calls are. To avoid
use-after-free, we should zeroize dp->slave before calling
dsa_slave_destroy().
In practice I cannot really test real life improvements brought by this
change, since in my systems, netdevice creation races with PHY autoneg
which takes a few seconds to complete, and that masks quite a few races.
Effects might be noticeable in a setup with fixed links all the way to
an external system.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit a57d8c217aad ("net: dsa: flush switchdev workqueue before
tearing down CPU/DSA ports"), the port setup and teardown procedure
became asymmetric.
The fact of the matter is that user ports need the shared ports to be up
before they can be used for CPU-initiated termination. And since we
register net devices for the user ports, those won't be functional until
we also call the setup for the shared (CPU, DSA) ports. But we may do
that later, depending on the port numbering scheme of the hardware we
are dealing with.
It just makes sense that all shared ports are brought up before any user
port is. I can't pinpoint any issue due to the current behavior, but
let's change it nonetheless, for consistency's sake.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA needs to simulate master tracking events when a binding is first
with a DSA master established and torn down, in order to give drivers
the simplifying guarantee that ->master_state_change calls are made
only when the master's readiness state to pass traffic changes.
master_state_change() provide a operational bool that DSA driver can use
to understand if DSA master is operational or not.
To avoid races, we need to block the reception of
NETDEV_UP/NETDEV_CHANGE/NETDEV_GOING_DOWN events in the netdev notifier
chain while we are changing the master's dev->dsa_ptr (this changes what
netdev_uses_dsa(dev) reports).
The dsa_master_setup() and dsa_master_teardown() functions optionally
require the rtnl_mutex to be held, if the tagger needs the master to be
promiscuous, these functions call dev_set_promiscuity(). Move the
rtnl_lock() from that function and make it top-level.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At present there are two paths for changing the MTU of the DSA master.
The first is:
dsa_tree_setup
-> dsa_tree_setup_ports
-> dsa_port_setup
-> dsa_slave_create
-> dsa_slave_change_mtu
-> dev_set_mtu(master)
The second is:
dsa_tree_setup
-> dsa_tree_setup_master
-> dsa_master_setup
-> dev_set_mtu(dev)
So the dev_set_mtu() call from dsa_master_setup() has been effectively
superseded by the dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN) that is
done from dsa_slave_create() for each user port. The later function also
updates the master MTU according to the largest user port MTU from the
tree. Therefore, updating the master MTU through a separate code path
isn't needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently dsa_slave_create() has two sequences of rtnl_lock/rtnl_unlock
in a row. Remove the rtnl_unlock() and rtnl_lock() in between, such that
the operation can execute slighly faster.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dsa_slave_create() there are 2 sections that take rtnl_lock():
MTU change and netdev registration. They are separated by PHY
initialization.
There isn't any strict ordering requirement except for the fact that
netdev registration should be last. Therefore, we can perform the MTU
change a bit later, after the PHY setup. A future change will then be
able to merge the two rtnl_lock sections into one.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-01-06
1) Fix xfrm policy lookups for ipv6 gre packets by initializing
fl6_gre_key properly. From Ghalem Boudour.
2) Fix the dflt policy check on forwarding when there is no
policy configured. The check was done for the wrong direction.
From Nicolas Dichtel.
3) Use the correct 'struct xfrm_user_offload' when calculating
netlink message lenghts in xfrm_sa_len(). From Eric Dumazet.
4) Tread inserting xfrm interface id 0 as an error.
From Antony Antony.
5) Fail if xfrm state or policy is inserted with XFRMA_IF_ID 0,
xfrm interfaces with id 0 are not allowed.
From Antony Antony.
6) Fix inner_ipproto setting in the sec_path for tunnel mode.
From Raed Salem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-01-06
1) Fix some clang_analyzer warnings about never read variables.
From luo penghao.
2) Check for pols[0] only once in xfrm_expand_policies().
From Jean Sacren.
3) The SA curlft.use_time was updated only on SA cration time.
Update whenever the SA is used. From Antony Antony
4) Add support for SM3 secure hash.
From Xu Jia.
5) Add support for SM4 symmetric cipher algorithm.
From Xu Jia.
6) Add a rate limit for SA mapping change messages.
From Antony Antony.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed in case a new transaction is made that doesn't insert any
new elements into an already existing set.
Else, after second 'nft -f ruleset.txt', lookups in such a set will fail
because ->lookup() encounters raw_cpu_ptr(m->scratch) == NULL.
For the initial rule load, insertion of elements takes care of the
allocation, but for rule reloads this isn't guaranteed: we might not
have additions to the set.
Fixes: 3c4287f62044a90e ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: etkaar <lists.netfilter.org@prvy.eu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IP fragments do not come with the transport header, hence skip bogus
layer 4 checksum updates.
Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields")
Reported-and-tested-by: Steffen Weinreich <steve@weinreich.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add an xdp_do_redirect_frame() variant which supports pre-computed
xdp_frame structures. This will be used in bpf_prog_run() to avoid having
to write to the xdp_frame structure when the XDP program doesn't modify the
frame boundaries.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-6-toke@redhat.com
All map redirect functions except XSK maps convert xdp_buff to xdp_frame
before enqueueing it. So move this conversion of out the map functions
and into xdp_do_redirect(). This removes a bit of duplicated code, but more
importantly it makes it possible to support caller-allocated xdp_frame
structures, which will be added in a subsequent commit.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-5-toke@redhat.com
Store the XDP mem ID inside the page_pool struct so it can be retrieved
later for use in bpf_prog_run().
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220103150812.87914-4-toke@redhat.com
Add a new callback function to page_pool that, if set, will be called every
time a new page is allocated. This will be used from bpf_test_run() to
initialise the page data with the data provided by userspace when running
XDP programs with redirect turned on.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220103150812.87914-3-toke@redhat.com
The functions that register an XDP memory model take a struct xdp_rxq as
parameter, but the RXQ is not actually used for anything other than pulling
out the struct xdp_mem_info that it embeds. So refactor the register
functions and export variants that just take a pointer to the xdp_mem_info.
This is in preparation for enabling XDP_REDIRECT in bpf_prog_run(), using a
page_pool instance that is not connected to any network device.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-2-toke@redhat.com
The commit 4057765f2dee ("sock: consistent handling of extreme
SO_SNDBUF/SO_RCVBUF values") added a change to prevent underflow
in setsockopt() around SO_SNDBUF/SO_RCVBUF.
This patch adds the same change to _bpf_setsockopt().
Fixes: 4057765f2dee ("sock: consistent handling of extreme SO_SNDBUF/SO_RCVBUF values")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220104013153.97906-2-kuniyu@amazon.co.jp
In isotp_rcv_ff() 32 bit of data received over the network is assigned
to struct tpcon::len. Later in that function the length is checked for
the maximal supported length against MAX_MSG_LENGTH.
As struct tpcon::len is an "int" this check does not work, if the
provided length overflows the "int".
Later on struct tpcon::idx is compared against struct tpcon::len.
To fix this problem this patch converts both struct tpcon::{idx,len}
to unsigned int.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20220105132429.1170627-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
sock_map_link() is called to update a sockmap entry with a sk. But, if the
sock_map_init_proto() call fails then we return an error to the map_update
op against the sockmap. In the error path though we need to cleanup psock
and dec the refcnt on any programs associated with the map, because we
refcnt them early in the update process to ensure they are pinned for the
psock. (This avoids a race where user deletes programs while also updating
the map with new socks.)
In current code we do the prog refcnt dec explicitely by calling
bpf_prog_put() when the program was found in the map. But, after commit
'38207a5e81230' in this error path we've already done the prog to psock
assignment so the programs have a reference from the psock as well. This
then causes the psock tear down logic, invoked by sk_psock_put() in the
error path, to similarly call bpf_prog_put on the programs there.
To be explicit this logic does the prog->psock assignment:
if (msg_*)
psock_set_prog(...)
Then the error path under the out_progs label does a similar check and
dec with:
if (msg_*)
bpf_prog_put(...)
And the teardown logic sk_psock_put() does ...
psock_set_prog(msg_*, NULL)
... triggering another bpf_prog_put(...). Then KASAN gives us this splat,
found by syzbot because we've created an inbalance between bpf_prog_inc and
bpf_prog_put calling put twice on the program.
BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline]
BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline] kernel/bpf/syscall.c:1829
BUG: KASAN: vmalloc-out-of-bounds in bpf_prog_put+0x8c/0x4f0 kernel/bpf/syscall.c:1829 kernel/bpf/syscall.c:1829
Read of size 8 at addr ffffc90000e76038 by task syz-executor020/3641
To fix clean up error path so it doesn't try to do the bpf_prog_put in the
error path once progs are assigned then it relies on the normal psock
tear down logic to do complete cleanup.
For completness we also cover the case whereh sk_psock_init_strp() fails,
but this is not expected because it indicates an incorrect socket type
and should be caught earlier.
Fixes: 38207a5e8123 ("bpf, sockmap: Attach map progs to psock early for feature probes")
Reported-by: syzbot+bb73e71cf4b8fd376a4f@syzkaller.appspotmail.com
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220104214645.290900-1-john.fastabend@gmail.com
Applications can be confused slightly because we do not always return the
same error code as expected, e.g. what the TCP stack normally returns. For
example on a sock err sk->sk_err instead of returning the sock_error we
return EAGAIN. This usually means the application will 'try again'
instead of aborting immediately. Another example, when a shutdown event
is received we should immediately abort instead of waiting for data when
the user provides a timeout.
These tend to not be fatal, applications usually recover, but introduces
bogus errors to the user or introduces unexpected latency. Before
'c5d2177a72a16' we fell back to the TCP stack when no data was available
so we managed to catch many of the cases here, although with the extra
latency cost of calling tcp_msg_wait_data() first.
To fix lets duplicate the error handling in TCP stack into tcp_bpf so
that we get the same error codes.
These were found in our CI tests that run applications against sockmap
and do longer lived testing, at least compared to test_sockmap that
does short-lived ping/pong tests, and in some of our test clusters
we deploy.
Its non-trivial to do these in a shorter form CI tests that would be
appropriate for BPF selftests, but we are looking into it so we can
ensure this keeps working going forward. As a preview one idea is to
pull in the packetdrill testing which catches some of this.
Fixes: c5d2177a72a16 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220104205918.286416-1-john.fastabend@gmail.com
As reported by Johannes, the tracker allocated in
ethnl_default_notify() is not really needed, as this
function is not expected to change a device reference count.
Fixes: e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/r/20220105170849.2610470-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qdisc_create() error path needs to use dev_put_track()
because qdisc_alloc() allocated the tracker.
Fixes: 606509f27f67 ("net/sched: add net device refcount tracker to struct Qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220104170439.3790052-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The issue takes place in one error path of clusterip_tg_check(). When
memcmp() returns nonzero, the function simply returns the error code,
forgetting to decrease the reference count of a clusterip_config
object, which is bumped earlier by clusterip_config_find_get(). This
may incur reference count leak.
Fix this issue by decrementing the refcount of the object in specific
error path.
Fixes: 06aa151ad1fc74 ("netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The cross-chip notifiers for HSR are bypass operations, meaning that
even though all switches in a tree are notified, only the switch
specified in the info structure is targeted.
We can eliminate the unnecessary complexity by deleting the cross-chip
notifier logic and calling the ds->ops straight from port.c.
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cross-chip notifiers for MRP are bypass operations, meaning that
even though all switches in a tree are notified, only the switch
specified in the info structure is targeted.
We can eliminate the unnecessary complexity by deleting the cross-chip
notifier logic and calling the ds->ops straight from port.c.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cross-chip notifier boilerplate code meant to check the presence of
ds->ops->port_mrp_add_ring_role before calling it, but checked
ds->ops->port_mrp_add instead, before calling
ds->ops->port_mrp_add_ring_role.
Therefore, a driver which implements one operation but not the other
would trigger a NULL pointer dereference.
There isn't any such driver in DSA yet, so there is no reason to
backport the change. Issue found through code inspection.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Fixes: c595c4330da0 ("net: dsa: add MRP support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The inner_ipproto saves the inner IP protocol of the plain
text packet. This allows vendor's IPsec feature making offload
decision at skb's features_check and configuring hardware at
ndo_start_xmit, current code implenetation did not handle the
case where IPsec is used in tunnel mode.
Fix by handling the case when IPsec is used in tunnel mode by
reading the protocol of the plain text packet IP protocol.
Fixes: fa4535238fb5 ("net/xfrm: Add inner_ipproto into sec_path")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* mac80211: initialize a variable to avoid using it uninitialized
* mac80211 mesh: put some data structures into the container to
fix bugs with and not have to deal with allocation failures
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmHUXRsACgkQB8qZga/f
l8SsTA/+LlIv/c4HLaRP5t42ybDqTyAS02rGsMKxadb0kUUTyyByvMrIEbp36vXb
Lc4ZvnWtweRrE0issn/FOMKi7g2iTVwNMo0xlUStZAO+hOVf1PK6KMCLNs4gZlvj
VKrQQaTVwnAAcdniNNSc3LxHC2h1IEc3D7ITS23mrfLL+mKFji+jzAWGwQgyKrZh
MeRLaYCvsAeaVxshYcJjeFJ/NYf8GjNmSYJNyatq8nXzIwRYrTON294x7QX+EDQ3
raGsD0ihYvOO0Lfji5YoQEVSjW/ePzRGJGMbtwmpLh1TwPSXAKbS8mz1skg2TqoB
9DAQyYFa/6pa15S0uQkvf5pf9cqvQJyCmSsy97WaLZBPjYfCHRXMYIlSpW49aVv/
b5Wkxxh30AXRA/Xj2gi5jb9JIyE3/awO3mmjF3l10d/NAyChtMqpxJrOfd7aWo3n
EhQlC71CMPYlMcKDhAs9NXesa/R3EqnjhYHSqcOX/yyd3xZ7MV5F3J7DTDDDJLsR
a6eD2rPCgM7lFIfiiDTlqP+oOwBTojyXuImsBsTW+SObCXJtkClykD1h5BEUg8ca
Y5hkl/2Pyes6x3UGCrccviOyFcWrSNxW6Di+du/t6R7tnaKJd0/xSDB/s8cnILsn
r97Ww70DX4MqrAMPCdIeRCXf4czquqknPuDTt3DgnvKxJZnkl7c=
=eiG1
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more changes:
- mac80211: initialize a variable to avoid using it uninitialized
- mac80211 mesh: put some data structures into the container to
fix bugs with and not have to deal with allocation failures
* tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
====================
Link: https://lore.kernel.org/r/20220104144449.64937-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
