IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In one of my rcutorture tests the TSC clocksource got marked unstable
due to a large difference in the TSC value. I'm not sure if the guest
run for a long time with disabled interrupts or if the host was very
busy and didn't schedule the guest for some time.
I took a look on the qemu/KVM options and decided to update the options:
- Use kvm{32|64} as CPU. We could probably use `host' (like ARM does)
for maximum available features but since we don't run any userland I'm
not sure if it makes any difference.
- Drop the "noapic" option. There is no history why the APIC was disabled,
I see no reason for it. Once old qemu versions fade away, we can add
"x2apic=on,tsc-deadline=on,hypervisor=on,tsc_adjust=on".
- Additional config options. It ensures that the kernel knowns that it
runs as a kvm guest and can use virt devices like the kvm-clock as
clocksource. The kvm-clock was the main motivation here.
- I didn't add a random HW device. It would make the random device ready
earlier (not it doesn't complete the initialisation at all) but I
doubt that there is any need for this.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ paulmck: The world is not quite ready for CONFIG_PARAVIRT_SPINLOCKS=y
and x2apic, so they are omitted for the time being. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
I have been showing off a trivial RCU implementation for non-preemptive
environments for some time now:
#define rcu_read_lock()
#define rcu_read_unlock()
#define rcu_dereference(p) READ_ONCE(p)
#define rcu_assign_pointer(p, v) smp_store_release(&(p), (v))
void synchronize_rcu(void)
{
int cpu;
for_each_online_cpu(cpu)
sched_setaffinity(current->pid, cpumask_of(cpu));
}
Trivial or not, as the old saying goes, "if it ain't tested, it don't
work!". This commit therefore adds a "trivial" flavor to rcutorture
and a corresponding TRIVIAL test scenario. This variant does not handle
CPU hotplug, which is unconditionally enabled on x86 for post-v5.1-rc3
kernels, which is why the TRIVIAL.boot says "rcutorture.onoff_interval=0".
This commit actually does handle CONFIG_PREEMPT=y kernels, but only
because it turns back the Linux-kernel clock in order to provide these
alternative definitions (or the moral equivalent thereof):
#define rcu_read_lock() preempt_disable()
#define rcu_read_unlock() preempt_enable()
In CONFIG_PREEMPT=n kernels without debugging, these are equivalent to
empty macros give or take a compiler barrier. However, the have been
successfully tested with actual empty macros as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix symbol issue reported by kbuild test robot <lkp@intel.com>. ]
[ paulmck: Work around sched_setaffinity() issue noted by Andrea Parri. ]
[ paulmck: Add rcutorture.shuffle_interval=0 to TRIVIAL.boot to fix
interaction with shuffler task noted by Peter Zijlstra. ]
Tested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Because TREE01 can end up running more vCPUs that physical CPUs,
hammering these shortchanged CPUs with tight loops containing call_rcu()
invocations seems a bit like overkill. This commit therefore exempts
TREE01 from rcutorture's forward-progress testing.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address and add copyright notices.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Now that SRCU permits call_srcu() to be invoked at early boot, this
commit ensures that the rcutorture scripting tests early boot call_srcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the RCU-bh and RCU-sched update-side functions are simple
wrappers around their RCU counterparts, there isn't a whole lot of
point in testing them. This commit therefore removes the self-test
capability and removes the corresponding kernel-boot parameters.
It also updates the various rcutorture .boot files to remove the
kernel boot parameters that call for testing RCU-bh and RCU-sched.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one RCU flavor to rule them all, the TREE06
and TREE08 test scenarios are redundant. This commit therefore removes
them. Later changes will rebalance and renumber the tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some RCU bugs have been sensitive to the frequency of CPU-hotplug
operations, which have been gradually increased over time. But this
frequency is now at the one-second lower limit that can be specified using
the rcutorture.onoff_interval kernel parameter. This commit therefore
changes the units of rcutorture.onoff_interval from seconds to jiffies,
and also sets the value specified for this kernel parameter in the TREE03
rcutorture scenario to 200, which is 200 milliseconds for HZ=1000.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The main race with the early part of grace-period initialization appears
to be with CPU hotplug. To more fully open this race window, this commit
moves the rcu_gp_slow() from the beginning of the early initialization
loop to follow that loop, thus widening the race window, especially for
the rcu_node structures that are initialized last. This commit also
expands rcutree.gp_preinit_delay from 3 to 12, giving the same overall
delay in the grace period, but concentrated in the spot where it will
do the most good.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The TREE08-T.boot file was used to provide alternative options for
debugging, but things have changed, it has not kept up, and it has not
been used or missed. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The default values for nreader and nwriter are apparently not all that
user-friendly, resulting in people doing scalability tests that ran all
runs at large scale. This commit therefore makes both the nreaders and
nwriters module default to the number of CPUs, and adds a comment to
rcuperf.c stating that the number of CPUs should be specified using the
nr_cpus kernel boot parameter. This commit also eliminates the redundant
rcuperf scripting specification of default values for these parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")
broke CONFIG_NO_HZ_FULL_ALL=y kernels. This breakage is due to the code
under CONFIG_NO_HZ_FULL_ALL failing to invoke the shiny new housekeeping
functions. This means that rcutorture scenario TREE04 now emits RCU CPU
stall warnings due to the RCU grace-period kthreads not being awakened
at a time of their choosing, or perhaps even not at all:
[ 27.731422] rcu_bh kthread starved for 21001 jiffies! g18446744073709551369 c18446744073709551368 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=3
[ 27.731423] rcu_bh I14936 9 2 0x80080000
[ 27.731435] Call Trace:
[ 27.731440] __schedule+0x31a/0x6d0
[ 27.731442] schedule+0x31/0x80
[ 27.731446] schedule_timeout+0x15a/0x320
[ 27.731453] ? call_timer_fn+0x130/0x130
[ 27.731457] rcu_gp_kthread+0x66c/0xea0
[ 27.731458] ? rcu_gp_kthread+0x66c/0xea0
Because no one has complained about CONFIG_NO_HZ_FULL_ALL=y being broken,
I hypothesize that no one is in fact using it, other than rcutorture.
This commit therefore eliminates CONFIG_NO_HZ_FULL_ALL and updates
rcutorture's config files to instead use the nohz_full= kernel parameter
to put the desired CPUs into nohz_full mode.
Fixes: 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
The purpose of torture_runnable is to allow rcutorture and locktorture
to be started and stopped via sysfs when they are built into the kernel
(as in not compiled as loadable modules). However, the 0444 permissions
for both instances of torture_runnable prevent this use case from ever
being put into practice. Given that there have been no complaints
about this deficiency, it is reasonable to conclude that no one actually
makes use of this sysfs capability. The perf_runnable module parameter
for rcuperf is in the same situation.
This commit therefore removes both torture_runnable instances as well
as perf_runnable.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The maxcpus= kernel boot parameter limits the number of CPUs brought
online at boot time, but it does nothing to prevent additional CPUs
from being brought up later. Placing a hard cap on the total number
of CPUs is instead the job of the nr_cpus= boot parameter. This commit
therefore switches the configfrag_boot_cpus() shell function from maxcpus=
to nr_cpus=. This commit also adds a nr_cpus=43 kernel parameter to RCU's
TREE01 test scenario, but retains the maxcpus=8 kernel parameter in order
to test the ability of RCU expedited grace periods to handle new CPUs
coming online for the first time during grace-period initialization.
Finally, this commit makes the torture scheduling allow maxcpus= to
override other means of specifying the number of CPUs to allow for.
This last works because the torture kernel modules size their workloads
based on the number of CPUs present at the start of the test, not the
ultimate number of CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Strings used in event tracing need to be specially handled, for example,
being copied to the trace buffer instead of being pointed to by the trace
buffer. Although the TPS() macro can be used to "launder" pointed-to
strings, this might not be all that effective within a loadable module.
This commit therefore copies rcutorture's strings to the trace buffer.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
This commit selects CONFIG_PROVE_LOCKING for the SRCU-u scenario
to get better test coverage.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Classic SRCU is no more, so this commit removes the corresponding
rcutorture boot-parameters file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tiny RCU's job is to be tiny, so this commit removes its RCU CPU
stall warning code. After this, there is no longer any need for
rcu_sched_ctrlblk and rcu_bh_ctrlblk to be in tiny_plugin.h, so this
commit also moves them to tiny.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_NOCB_CPU_ALL, CONFIG_RCU_NOCB_CPU_NONE, and
CONFIG_RCU_NOCB_CPU_ZERO Kconfig options are used only in testing and
are redundant with the rcu_nocbs= boot parameter. This commit therefore
removes these three Kconfig options and adjusts the rcutorture scripts
to use the boot parameter instead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's debugfs tracing used to be the only reasonable low-level debug
information available, but ftrace and event tracing has since surpassed
the RCU debugfs level of usefulness. This commit therefore removes
RCU's debugfs tracing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Classic SRCU was only ever intended to be a fallback in case of issues
with Tree/Tiny SRCU, and the latter two are doing quite well in testing.
This commit therefore removes Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The PROVE_RCU_REPEATEDLY Kconfig option was initially added due to
the volume of messages from PROVE_RCU: Doing just one per boot would
have required excessive numbers of boots to locate them all. However,
PROVE_RCU messages are now relatively rare, so there is no longer any
reason to need more than one such message per boot. This commit therefore
removes the PROVE_RCU_REPEATEDLY Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
The NO_HZ_FULL_SYSIDLE full-system-idle capability was added in 2013
by commit 0edd1b1784 ("nohz_full: Add full-system-idle state machine"),
but has not been used. This commit therefore removes it.
If it turns out to be needed later, this commit can always be reverted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Anything that can be done with the RCU_KTHREAD_PRIO Kconfig option can
also be done with the rcutree.kthread_prio kernel boot parameter.
This commit therefore removes this Kconfig option.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
The RCU_TORTURE_TEST_SLOW_PREINIT, RCU_TORTURE_TEST_SLOW_PREINIT_DELAY,
RCU_TORTURE_TEST_SLOW_PREINIT_DELAY, RCU_TORTURE_TEST_SLOW_INIT,
RCU_TORTURE_TEST_SLOW_INIT_DELAY, RCU_TORTURE_TEST_SLOW_CLEANUP,
and RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY Kconfig options are only
useful for torture testing, and there are the rcutree.gp_cleanup_delay,
rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot parameters
that rcutorture can use instead. The effect of these parameters is to
artificially slow down grace period initialization and cleanup in order
to make some types of race conditions happen more often.
This commit therefore simplifies Tree RCU a bit by removing the Kconfig
options and adding the corresponding kernel parameters to rcutorture's
.boot files instead. However, this commit also leaves out the kernel
parameters for TREE02, TREE04, and TREE07 in order to have about the
same number of tests slowed as not slowed. TREE01, TREE03, TREE05,
and TREE06 are slowed, and the rest are not slowed.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Given that the plan is to retire Classic SRCU in the near future, this
commit reduces the number of CPUs dedicated to testing Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a TINY rcuperf test scenario, which allows performance
testing of Tiny RCU and Tiny SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a Kconfig-fragment file for Classic SRCU to ease
performance comparisons with Tree SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The TREE and TREE54 rcuperf scenarios' Kconfig fragment files specified
conflicting values for CONFIG_RCU_TRACE. This commit therefore removes
the =n line in favor of the =y line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A number of the rcutorture test scenarios were not using the desired
Kconfig options because dependencies were preventing the selections in the
Kconfig-fragment files from being honored. This commit therefore updates
the Kconfig-fragment files to account for these changes in dependencies.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
A robust combination of paranoia and cowardice has resulted in retaining
Classic SRCU (CONFIG_CLASSIC_SRCU) as a backup for the shiny new Tiny
and Tree SRCU implementations. If it is to be a viable backup, it of
course needs to be tested. This commit therefore adds an rcutorture
scenario named SRCU-C for Classic SRCU. This commit also adds this
scenario to the set that are run by default.
Once sufficient good experience has accumulated for Tiny and Tree SRCU,
this test will be removed, along with the Classic SRCU implementation
itself.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds an SRCU-t rcutorture scenario for the new Tiny SRCU
implementation, removing the need to pass the --bootargs parameter to
kvm.sh to run Tiny SRCU tests. This commit also adds SRCU-t to the set
of scenarios that are run by default.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a test for a three-level srcu_node tree for Tree SRCU
in the existing SRCU-P scenario. This requires enabling CONFIG_RCU_EXPERT,
so the CONFIG_RCU_EXPERT=n scenario is now SRCU-N. The reason for using
SRCU-P for the tall tree is that preemption raises the possibility of
locating more bugs than does the non-preemptive SRCU-N.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Back when SRCU was simpler, there wasn't much need for lockdep.
However, with Tree SRCU, it is needed. This commit therefore adds
CONFIG_PROVE_LOCKING to the SRCU-P scenario.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement wraparound-safe refcount_t and kref_t types based on
generic atomic primitives (Peter Zijlstra)
- Improve and fix the ww_mutex code (Nicolai Hähnle)
- Add self-tests to the ww_mutex code (Chris Wilson)
- Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
Bueso)
- Micro-optimize the current-task logic all around the core kernel
(Davidlohr Bueso)
- Tidy up after recent optimizations: remove stale code and APIs,
clean up the code (Waiman Long)
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
fork: Fix task_struct alignment
locking/spinlock/debug: Remove spinlock lockup detection code
lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
lkdtm: Convert to refcount_t testing
kref: Implement 'struct kref' using refcount_t
refcount_t: Introduce a special purpose refcount type
sched/wake_q: Clarify queue reinit comment
sched/wait, rcuwait: Fix typo in comment
locking/mutex: Fix lockdep_assert_held() fail
locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
locking/rwsem: Reinit wake_q after use
locking/rwsem: Remove unnecessary atomic_long_t casts
jump_labels: Move header guard #endif down where it belongs
locking/atomic, kref: Implement kref_put_lock()
locking/ww_mutex: Turn off __must_check for now
locking/atomic, kref: Avoid more abuse
locking/atomic, kref: Use kref_get_unless_zero() more
locking/atomic, kref: Kill kref_sub()
locking/atomic, kref: Add kref_read()
locking/atomic, kref: Add KREF_INIT()
...
The RCU torture tests currently do not run any Tiny RCU scenarios for
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y. This is a hole in the test, given
that someone might need this in real life and given that Tiny RCU uses
different callback-handling code than does Tree RCU. This commit
therefore enables this Kconfig option for scenario TINY02.
Reported-by: "Ahmed, Iftekhar" <ahmedi@oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit runs TREE04 and TREE08 with CONFIG_RCU_EQS_DEBUG=y,
enabling dyntick-counter checking on those two tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit sets CONFIG_DEBUG_LOCK_ALLOC but not CONFIG_PROVE_LOCKING
for TREE08 in order to have at least one test with this configuration.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit enables the CONFIG_DEBUG_OBJECTS_RCU_HEAD Kconfig option
in TREE02 in order to do at least some testing with this enabled.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit moves CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP,
CONFIG_RCU_TORTURE_TEST_SLOW_INIT, and CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT
from CFcommon to all of the TREE scenarios other than TREE08 and TREE09
in order to do at least some testing without these Kconfig options set.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds CONFIG_PROVE_RCU_REPEATEDLY=y, which has been untested
for quite some time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit verifies coverage of testing with CONFIG_RCU_STALL_COMMON=n.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Although ww_mutexes degenerate into mutexes, it would be useful to
torture the deadlock handling between multiple ww_mutexes in addition to
torturing the regular mutexes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <dev@mblankhorst.nl>
Cc: Nicolai Hähnle <nhaehnle@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161201114711.28697-3-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the rcutorture scripts do not test boot-time adjustment of
leaf fanout (via the rcutree.rcu_fanout_leaf boot parameter), as was noted
during testing carried out by Iftekhar Ahmed of Oregon State University.
This commit therefore adjusts TREE04's CONFIG_RCU_FANOUT_LEAF from 4 to 3,
and also adds rcutree.rcu_fanout_leaf=4 to its boot parameters. This
change forces RCU's boot-time geometry-change code to be exercised.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds an rcuperf scenario named TREE54 that uses 54 CPUs and
provides a four-level rcu_node combining tree.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit enables ftrace in the rcuperf TREE kernel build and adds
an ftrace_dump() at the end of rcuperf processing. This data will be
used to measure the actual durations of the expedited grace periods
without the added delays inherent in the kernel-module measurements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the scripting changes to add support for the shiny
new rcuperf kernel module.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
