IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
C-state pre-wake setting[1] is an optimization for some Intel CPUs to
be woken up from deep C-states in order to reduce latency. According to
the spec, the BIT30 is the C-state Pre-wake Disable. Expose this setting
accordingly.
Sample output from turbostat:
...
cpu51: MSR_IA32_POWER_CTL: 0x1a00a40059 (C1E auto-promotion: DISabled)
C-state Pre-wake: ENabled
cpu51: MSR_TURBO_RATIO_LIMIT: 0x2021212121212224
...
[1] https://intel.github.io/wult/#c-state-pre-wake
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It was found that on Elkhart Lake the TSC frequency is driven by
a separate crystal-clock domain, which is different from the
BCLK domain which includes mperf. This has result in small different
speed thus inconsistence between TSC and the mperf, which caused the
Busy% to be higher than 100%. On this platform it seems that the mperf
runs faster than tsc when the CPU is 100% utilized:
delta tsc(18815473183) < delta mperf(18958403680) for 10 seconds.
To align TSC with mperf, leverage the tsc_tweak mechanism introduced for
cores newer than Skylake, so that TSC and mperf would be calculated in
the same domain.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Do not mark a comment as kernel-doc notation when it is not
meant to be in kernel-doc notation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently the turbostat treats ICX the same way as SKX and shares the
code among them. But one difference is that ICX does not support Package
C6 Retention, unlike SKX and CLX.
So this patch:
1. Splitting SKX and ICX in turbostat.
2. Removing Package C6 Rentention for ICX.
And after this split, it would be easier to cutomize Ice Lake Server
in turbostat in the future.
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The idx_to_offset() function returns type int (32-bit signed), but
MSR_PKG_ENERGY_STAT is u32 and would be interpreted as a negative number.
The end result is that it hits the if (offset < 0) check in update_msr_sum()
which prevents the timer callback from updating the stat in the background when
long durations are used. The similar issue exists in offset_to_idx() and
update_msr_sum(). Fix this issue by converting the 'int' to 'off_t' accordingly.
Fixes: 9972d5d84d76 ("tools/power turbostat: Enable accumulate RAPL display")
Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
It was reported that on Zen+ system turbostat started exiting,
which was tracked down to the MSR_PKG_ENERGY_STAT read failing because
offset_to_idx wasn't returning a non-negative index.
This patch combined the modification from Bingsong Si and
Bas Nieuwenhuizen and addd the MSR to the index system as alternative for
MSR_PKG_ENERGY_STATUS.
Fixes: 9972d5d84d76 ("tools/power turbostat: Enable accumulate RAPL display")
Reported-by: youling257 <youling257@gmail.com>
Tested-by: youling257 <youling257@gmail.com>
Tested-by: Kurt Garloff <kurt@garloff.de>
Tested-by: Bingsong Si <owen.si@ucloud.cn>
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Co-developed-by: Bingsong Si <owen.si@ucloud.cn>
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This reverts commit 6ff7cb371c4bea3dba03a56d774da925e78a5087.
Apparently the TCC offset should not be used to adjust what temperature
we show the user after all.
(on most systems, TCC offset is 0, FWIW)
Fixes: 6ff7cb371c4b
Signed-off-by: Len Brown <len.brown@intel.com>
Ice Lake D is low-end server version of Ice Lake X, reuse
the code accordingly.
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Share the code between Alder Lake Mobile and Alder Lake Desktop.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Use linux-perf to access the hardware instructions-retired counter.
This is necessary because the counter is not enabled by default,
and also the counter is prone to roll-over -- both of which
perf manages.
It is not necessary to use perf for the cycle counter,
because turbostat already needs to collect delta-aperf
to calcuate frequency.
Signed-off-by: Len Brown <len.brown@intel.com>
Commit
6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
converted turbostat to read the energy_perf_bias value from sysfs.
However, older kernels which do not have that file yet, would fail. For
those, fall back to the MSR reading.
Fixes: 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://lkml.kernel.org/r/20210127132444.981120-1-dedekind1@gmail.com
an attempt to have userspace tools not poke at naked MSRs. This round
deals with MSR_IA32_ENERGY_PERF_BIAS and removes direct poking into it
by our in-tree tools in favor of the proper "energy_perf_bias" sysfs
interface which we already have.
In addition, the msr.ko write filtering's error message points to a new
summary page which contains the info we collected from helpful reporters
about which userspace tools write MSRs:
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about
along with the current status of their conversion.
Rest is the usual small fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl/XVKYACgkQEsHwGGHe
VUondg//fv3aQM3KtWE7sxv6BjpiUNozPBELRuKo+EskHSxHudRhBxzdSMM7WgKq
2uojb2CQtzRzYhHuiXjXKfbB7Ci/Jo4EDCJW2otpiqit7/UgXu15Q5ypCUMIteiV
u9A2w3oN3GPR5TuofLWCffaotVMpFok3u7jX7RxEQPWmZqJItTwZpqYLeyniHaKM
c6taAxZVyV13iejRhxim2zkl/hMXpjA8I+8CqWIL25J7GYlYeWLWxWYmHIQTs0NM
zSIyr47RD8RRXVeRdeJMxnQblKE1zrObIV1fUXXu1dSW47DkrrcOQwEMorNjPtPA
FR5Xhi+TX8JrBasMpwCnV/CTj6Ua8UsMfwQcPOFnXALPj87HfFSypa5BpnBH5xTW
PaiatRmiNJm3g79ncaTvXCksMbb4WANqOYK+gsGYvtKbfLR+caWT6vytjZA6sC6x
laynstV9PFUyewdwjjAjilhArzV+y+5RsRudBK8xSjcawbyV4ZEorNKYS9qrhm+y
7CAM9A8fCQiO6POr6W7HcfmkUOHC9PLhtyjdJH89tAmaf+sfvaczzx3awwSuKx7P
0rJlDiJP1v7yEpOMWHbpGIqjMBaWK4y3mb4g3UwFpHpo8cTl+WXZQppOPIBn9GA9
ASLYT/ze7zk1Ua2V88qoXiC5AEvqBnSq4fp2pmf06ROZgBnYT6o=
=ISyk
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"The main part of this branch is the ongoing fight against windmills in
an attempt to have userspace tools not poke at naked MSRs.
This round deals with MSR_IA32_ENERGY_PERF_BIAS and removes direct
poking into it by our in-tree tools in favor of the proper
"energy_perf_bias" sysfs interface which we already have.
In addition, the msr.ko write filtering's error message points to a
new summary page which contains the info we collected from helpful
reporters about which userspace tools write MSRs:
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about
along with the current status of their conversion.
The rest is the usual small fixes and improvements"
* tag 'x86_misc_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msr: Add a pointer to an URL which contains further details
x86/pci: Fix the function type for check_reserved_t
selftests/x86: Add missing .note.GNU-stack sections
selftests/x86/fsgsbase: Fix GS == 1, 2, and 3 tests
x86/msr: Downgrade unrecognized MSR message
x86/msr: Do not allow writes to MSR_IA32_ENERGY_PERF_BIAS
tools/power/x86_energy_perf_policy: Read energy_perf_bias from sysfs
tools/power/turbostat: Read energy_perf_bias from sysfs
tools/power/cpupower: Read energy_perf_bias from sysfs
MAINTAINERS: Cleanup SGI-related entries
turbostat tends to get confused when CPUs are added and removed
while it is running.
There are races, such as checking the current cpu, and then
reading a sysfs file that depends on that cpu number.
Close the two issues that seem to come up the most.
First, there is an infinite reset loop detector --
change that to allow more resets before giving up.
Secondly, one of those file reads didn't really need
to exit the program on failure...
Signed-off-by: Len Brown <len.brown@intel.com>
cpu1: MSR_IA32_TEMPERATURE_TARGET: 0x05640000 (95 C) (100 default - 5 offset)
Account for the new "offset" field in MSR_TEMPERATURE_TARGET.
While this field is usually zero, ignoring it results in over-stating
the current temperature, both per-core and per-package.
Signed-off-by: Len Brown <len.brown@intel.com>
For compatibility reasons, Glibc off_t is a 32-bit type on 32-bit x86
unless _FILE_OFFSET_BITS=64 is defined. Add this define, as otherwise
reading MSRs with index 0x80000000 and above attempts a pread with a
negative offset, which fails.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Family 19h processors have the same RAPL (Running average power limit)
hardware register interface as Family 17h processors.
Change the family checks to succeed for Family 17h and above to enable
core and package energy measurement on Family 19h machines.
Also update the TDP to the largest found at the bottom of the page at
amd.com->processors->servers->epyc->2nd-gen-epyc, i.e., the EPYC 7H12.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Jacobsville doesn't have Package C2 and C6. Also
Core and DRAM RAPL are not available. Adjust output
accordingly.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The column already present called GFXMHz reads from gt_cur_freq_mhz,
which represents the GT frequency that was requested, but power
management might not be able to do that. So the new column will display
what the actual frequency GT is running at.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Like we skip PC3 and PC6 columns when the package C-state limit
disables them, skip PC8/PC9/CP10 under analogous conditions.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat formatting is broken with ACPI CST for enumeration. The
problem is that the CX_ACPI% is eight characters long which does not
work with tab formatting. One simple solution is to remove the underbar
from the state name such that C1_ACPI will be displayed as C1ACPI.
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Disabling cpu 0 results in an error
turbostat: /sys/devices/system/cpu/cpu0/topology/thread_siblings: open failed: No such file or directory
Use sched_getcpu() instead of a hardcoded cpu 0 to get the max cpu number.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Since the RAPL Joule Counter is 32 bit, turbostat would
only print a *star* instead of printing the actual energy
consumed to indicate the overflow due to long duration.
This does not meet the requirement from servers as the
sampling time of turbostat is usually very long on servers.
So maintain a set of MSR buffer, and update them
periodically before the 32bit MSR register is wrapped round,
so as to avoid the overflow.
The idea is similar to the implementation of ktime_get():
Periodical MSR timer:
total_rapl_sum += (current_rapl_msr - last_rapl_msr);
Using get_msr_sum() to get the accumulated RAPL:
return (current_rapl_msr - last_rapl_msr) + total_rapl_sum;
The accumulated RAPL mechanism will be turned on in next patch.
Originally-by: Aaron Lu <aaron.lwe@gmail.com>
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Change the energy variable from 32bit to 64bit,
so that it can record long time duration.
After this conversion, adjust the DELTA_WRAP32() accordingly.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
If the --quiet option is not used, turbostat prints a useful system
configuration header during startup.
But inclusion of idle system configuration information in this header
is currently a function of inclusion in the columns chosen to be displayed.
Always list this idle system configuration.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Users are puzzled when they use tuned performance and all their
C-states vanish. Dump /dev/cpu_dma_latency and state
whether the value is default, or constraining,
to explain this situation.
Signed-off-by: Len Brown <len.brown@intel.com>
Some Chromebook BIOS' do not export an ACPI LPIT, which is how
Linux finds the residency counter for CPU and SYSTEM low power states,
that is exports in /sys/devices/system/cpu/cpuidle/*residency_us
When these sysfs attributes are missing, check the debugfs attrubte
from the pmc_core driver, which accesses the same counter value.
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view the Tremont-based Elkhart Lake
is very similar to Goldmont, reuse the code of Goldmont.
Elkhart Lake does not support 'group turbo limit counter'
nor C3, adjust the code accordingly.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Jasper Lake, like Elkhart Lake, uses a Tremont CPU.
So reuse the code.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view, Ice Lake server looks like Sky Lake server.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view, Tiger Lake looks like Ice Lake.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
[-Wstringop-truncation]
reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view, Cometlake is like Kabylake.
Suggested-by: Rui Zhang <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Sync msr-index.h to pull in recent renames of the IA32_FEATURE_CONTROL
MSR definitions. Update KVM's VMX selftest and turbostat accordingly.
Keep the full name in turbostat's output to avoid breaking someone's
workflow, e.g. if a script is looking for the full name.
While using the renamed defines is by no means necessary, do the sync
now to avoid leaving a landmine that will get stepped on the next time
msr-index.h needs to be refreshed for some other reason.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-4-sean.j.christopherson@intel.com
Conflicts:
tools/power/x86/turbostat/turbostat.c
Recent turbostat changes conflicted with a pending rename of x86 model names in tip:x86/cpu,
sort it out.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD
Fam 17h (Zen) RAPL") and the commit 3316f99a9f1b68c578c5 ("tools/power
turbostat: Also read package power on AMD F17h (Zen)") add AMD Fam 17h
RAPL support.
Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX,
and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon
Dhyana Family 18h support for RAPL.
Already tested on Hygon multi-node systems and it shows correct per-core
energy usage and the total package power.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD
Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU
family. But the rapl_probe_amd() function use wrong model parameter.
Fix the wrong caller parameter of get_tdp_amd() to use family.
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Pu Wen <puwen@hygon.cn>
Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
In some case C1% will be wrong value, when platform doesn't have MSR for
C1 residency.
For example:
Core CPU CPU%c1
- - 100.00
0 0 100.00
0 2 100.00
1 1 100.00
1 3 100.00
But adding Busy% will fix this
Core CPU Busy% CPU%c1
- - 99.77 0.23
0 0 99.77 0.23
0 2 99.77 0.23
1 1 99.77 0.23
1 3 99.77 0.23
This issue can be reproduced on most of the recent systems including
Broadwell, Skylake and later.
This is because if we don't select Busy% or Avg_MHz or Bzy_MHz then
mperf value will not be read from MSR, so it will be 0. But this
is required for C1% calculation when MSR for C1 residency is not present.
Same is true for C3, C6 and C7 column selection.
So add another define DO_BIC_READ(), which doesn't depend on user
column selection and use for mperf, C3, C6 and C7 related counters.
So when there is no platform support for C1 residency counters,
we still read these counters, if the CPU has support and user selected
display of CPU%c1.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
