IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Enable uverbs_destroy_def_handler to be used by drivers and replace
current code to use it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend the existing grh_required flag to check when AV's are handled that
a GRH is present.
Since we don't want to do query_port during the AV checks for performance
reasons move the flag into the immutable_data.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The internal flag IP_BASED_GIDS was added to a field that was being used
to hold the port Info CapabilityMask without considering the effects this
will have. Since most drivers just use the value from the HW MAD it means
IP_BASED_GIDS will also become set on any HW that sets the IBA flag
IsOtherLocalChangesNoticeSupported - which is not intended.
Fix this by keeping port_cap_flags only for the IBA CapabilityMask value
and store unrelated flags externally. Move the bit definitions for this to
ib_mad.h to make it clear what is happening.
To keep the uAPI unchanged define a new set of flags in the uapi header
that are only used by ib_uverbs_query_port_resp.port_cap_flags which match
the current flags supported in rdma-core, and the values exposed by the
current kernel.
Fixes: b4a26a2728 ("IB: Report using RoCE IP based gids in port caps")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The only purpose for this structure was to hold the ib_uobject_file
pointer, but now that is part of the standard ib_uobject the structure
no longer makes any sense, so get rid of it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The ucontext isn't needed any more, just pass the uverbs_file directly.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The correct handle to refer to the idr/etc is ib_uverbs_file, revise all
the core APIs to use this instead. The user API are left as wrappers
that automatically convert a ucontext to a ufile for now.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The IDR is part of the ib_ufile so all the machinery to lock it, handle
closing and disassociation rightly belongs to the ufile not the ucontext.
This changes the lifetime of that data to match the lifetime of the file
descriptor which is always strictly longer than the lifetime of the
ucontext.
We need the entire locking machinery to continue to exist after ucontext
destruction to allow us to return the destroy data after a device has been
disassociated.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This consolidates a bunch of repeated code patterns into a helper.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
After all the rework is done it is now possible to include single flags in
the type macros. Any user of UVERBS_ATTR_STRUCT needs to zero check data
past the end of the known struct to be correct, so make this mandatory,
and get rid of MIN_SZ_OR_ZERO as a user flag.
This changes UVERBS_ATTR_TYPE to refer to a struct of exact size with not
possibility of extension, convert the few users of UVERBS_ATTR_TYPE and
MIN_SZ_OR_ZERO to use UVERBS_ATTR_STRUCT.
The one user of UVERBS_ATTR_STRUCT without MIN_SZ_OR_ZERO is just
confused. There is some padding at the end of that struct, but userspace
always provides it with the padding. The construction doesn't test if the
padding is zero, so it is pointless. Just use UVERBS_ATTR_TYPE.
Finally, rename min_sz_or_zero to zero_trailing to better reflect what it
does and hopefully avoid such mis-uses in the future.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This newer macro allows specifying a lower bound on the accepted size, and
has an 'unlimited' upper bound. Due to this it never checks for trailing
zeroing so it doesn't make any sense to combine it with MIN_SZ_OR_ZERO, so
drop MIN_SZ_OR_ZERO when they are used together
There were a couple of places that open coded this pattern, switch them to
use the clearer UVERBS_ATTR_MIN_SIZE for clarity.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This bit of boilerplate isn't really necessary, we can use bitfields
instead of a flags enum and the macros can then individually initialize
them through the __VA_ARGS__ like everything else.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Hide it inside the macros. The & is confusing and interferes with using
this as a generic DSL in later patches.
Since this also touches almost every line, also run the specs through
clang-format (with 'BinPackParameters: false') to make the maintenance
easier.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Instead of the large set of indirecting macros, define the few needed
macros to directly instantiate the struct uverbs_oject_tree_def and
associated objects list.
This is small amount of code duplication but the readability is far
better.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Instead of the large set of indirecting macros, define the few needed
macros to directly instantiate the struct uverbs_method_def and associated
attributes list.
This is small amount of code duplication but the readability is far
better.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Instead of using a complex cascade of macros, just directly provide the
initializer list each of the declarations is trying to create.
Now that the macros are simplified this also reworks the uverbs_attr_spec
to be friendly to older compilers by eliminating any unnamed
structures/unions inside, and removing the duplication of some fields. The
structure size remains at 16 bytes which was the original motivation for
some of this oddness.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The specs are required to operate the uverbs file, so they belong inside
the ib_uverbs_device, not inside the ib_device. The spec passed in the
ib_device is just a communication from the driver and should not be used
during runtime.
This also changes the lifetime of the spec memory to match the
ib_uverbs_device, however at this time the spec_root can still contain
driver pointers after disassociation, so it cannot be used if ib_dev is
NULL. This is preparation for another series.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
IB_MULTICAST_LID_BASE is defined as follows:
#define IB_MULTICAST_LID_BASE cpu_to_be16(0xC000)
Hence use be16_to_cpu() to convert it to CPU endianness. Compile-tested
only.
Fixes: af808ece5c ("IB/SA: Check dlid before SA agent queries for ClassPortInfo")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Improve uverbs_cleanup_ucontext algorithm to work properly when the
topology graph of the objects cannot be determined at compile time. This
is the case with objects created via the devx interface in mlx5.
Typically uverbs objects must be created in a strict topologically sorted
order, so that LIFO ordering will generally cause them to be freed
properly. There are only a few cases (eg memory windows) where objects can
point to things out of the strict LIFO order.
Instead of using an explicit ordering scheme where the HW destroy is not
allowed to fail, go over the list multiple times and allow the destroy
function to fail. If progress halts then a final, desperate, cleanup is
done before leaking the memory. This indicates a driver bug.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following the removal of ib_create_flow(), adjust the code to get rid of
ib_destroy_flow() too.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are no kernel users of this interface so lets drop it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that all users have been converted to use the version of these APIs
that returns a gid_attr pointer we can delete the old entry points.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
While processing a path record entry in CM messages the associated GID
attribute is now also supplied.
Currently for RoCE a netdevice's net namespace pointer and ifindex are
stored in path record entry. Both of these fields of the netdev can change
anytime while processing CM messages. Additionally storing net namespace
without holding reference will lead to use-after-free crash. Therefore it
is removed. Netdevice information for RoCE is instead provided via
referenced gid attribute in ib_cm requests.
Such a design leads to a situation where the kernel can crash when the net
pointer becomes invalid. However today it is always initialized to
init_net, which cannot become invalid. In order to support processing
packets in any arbitrary namespace of the received packet, it is necessary
to avoid such conditions.
This patch removes the dependency on the net pointer and ifindex; instead
it will rely on SGID attribute which contains a pointer to netdev.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Make the sgid_attr available along with path information to the event
consumer, this allows the consumer to keep using the same GID table entry
as the event is related to.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Hold reference to the the sgid_attr which is used in a cm_id until the
cm_id is destroyed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The work completion is inspected to determine what dgid table entry was
used to receieve the packet, produces a sgid_attr that matches and sticks
it in the ah_attr.
All callers of this function are now required to release the ah_attr on
success.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
In this context the uobject is not allowed to be NULL, so type is the same
as uobject->type, and at least for IDR, id is the same as uobject->id.
FD objects should never handle the FD number outside the uAPI boundary
code.
Suggested-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move some s_flags defines out of rdmavt and into hfi1 because they are
hfi1 specific and therefore should remain in the driver instead of
bubbling up to rdmavt.
Document device specific ranges in rdmavt and remap
those in hfi1.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Drivers that use the IOCTL API may have the ib_uverbs_file and need a
way to get the related ib_ucontext from it, this is enabled by this
patch.
Downstream patches from this series will use it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a new macro to be used for global methods on a singleton
object.
This macros sets internally the type_attrs to be NULL as such an object
can't be created.
Downstream patches from this series will use this macro.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Sometimes the uverbs uAPI doesn't really care about the structure it gets
from user-space. All it wants to do is to allocate enough space and send
it to the hardware/provider driver. Adding a UVERBS_ATTR_MIN_SIZE that
could be used for this scenarios. We use USHRT_MAX as the kernel known
size to bypass any zero validations.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding UVERBS_ATTR_SPEC_F_ALLOC_AND_COPY flag to PTR_IN attributes.
By using this flag, the parse automatically allocates and copies the
user-space data. This data is accessible by using uverbs_attr_get_len
and uverbs_attr_get_alloced_ptr inline accessor functions from the
handler.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths. For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16. Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the AH has a GRH then hold a reference to the sgid_attr inside the
common struct.
If the QP is modified with an AV that includes a GRH then also hold a
reference to the sgid_attr inside the common struct.
This informs the cache that the sgid_index is in-use so long as the AH or
QP using it exists.
This also means that all drivers can access the sgid_attr directly from
the ah_attr instead of querying the cache during their UD post-send paths.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.
Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Introduce AH attribute copy, move and replace APIs to be used by core and
provider drivers.
In CM code flow when ah attribute might be re-initialized twice while
processing incoming request, or initialized once while from path record
while sending out CM requests. Therefore use rdma_move_ah_attr API to
handle such scenarios instead of memcpy().
Provider drivers keeps a copy ah_attr during the lifetime of the ah.
Therefore, use rdma_replace_ah_attr() which conditionally release
reference to old ah_attr and holds reference to new attribute whose
referrence is released when the AH is freed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The sgid_attr will ultimately replace the sgid_index in the ah_attr.
This will allow for all layers to have a consistent view of what
gid table entry was selected as processing runs through all stages of the
stack.
This commit introduces the pointer and ensures it is set before calling
any driver callback that includes a struct ah_attr callback, allowing
future patches to adjust both the drivers and the callers to use
sgid_attr instead of sgid_index.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
If the gid_attr argument is NULL then the functions behave identically to
rdma_query_gid. ib_query_gid just calls ib_get_cached_gid, so everything
can be consolidated to one function.
Now that all callers either use rdma_query_gid() or ib_get_cached_gid(),
ib_query_gid() API is removed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These versions are functionally similar but all return gid_attrs and
related information via reference instead of via copy.
The old API is preserved, implemented as wrappers around the new, until
all callers can be converted.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch introduces three APIs, rdma_get_gid_attr(),
rdma_put_gid_attr(), and rdma_hold_gid_attr() which expose the reference
counting for GID table entries to the entire stack. The kref counting is
based on the struct ib_gid_attr pointer
Later patches will convert more cache query function to return struct
ib_gid_attrs.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that ib_gid_attr contains the GID, make use of that in the add_gid()
callback functions for the provider drivers to simplify the add_gid()
implementations.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to be able to expose pointers to the ib_gid_attrs in the GID
table we need to make it so the value of the pointer cannot be
changed. Thus each GID table entry gets a unique piece of kref'd memory
that is written only during initialization and remains constant for its
lifetime.
This eventually will allow the struct ib_gid_attrs to be returned without
copy from many of query the APIs, but it also provides a way to track when
all users of a HW table index go away.
For roce we no longer allow an in-use HW table index to be re-used for a
new an different entry. When a GID table entry needs to be removed it is
hidden from the find API, but remains as a valid HW index and all
ib_gid_attr points remain valid. The HW index is not relased until all
users put the kref.
Later patches will broadly replace the use of the sgid_index integer with
the kref'd structure.
Ultimately this will prevent security problems where the OS changes the
properties of a HW GID table entry while an active user object is still
using the entry.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flows were hidden from the C compiler; expose them as a zero-length
array to allow struct_size to work.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Resource tracking is supposed to be dual licensed: GPL-2.0 and
OpenIB, but the SPDX tag was not compliant to it. Update the tag to
properly reflect license.
Fixes: 02d8883f52 ("RDMA/restrack: Add general infrastructure to track RDMA resources")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
T10-PI offload capability is currently supported in iSER protocol only,
and the definition of the HCA protection information checks are missing
from the core layer. Add those definition to avoid code duplication in
other drivers (such iSER target and NVMeoF).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.:
ibv_qp, ibv_wq, ibv_flow.
This API enables generic counters creation and define mapping
to association with a verbs object, current mlx5 driver using
this API for flow counters.
With this API, an application can monitor the entire life cycle of
object activity, defined here as a static counters attachment.
This API also allows dynamic counters monitoring of measurement points
for a partial period in the verbs object life cycle.
In addition it presents the implementation of the generic counters interface.
This will be achieved by extending flow creation by adding a new flow count
specification type which allows the user to associate a previously created
flow counters using the generic verbs counters interface to the created flow,
once associated the user could read statistics by using the read function of
the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per objects
is a user space only API and this data is passed to kernel when the counted
object (e.g. flow) is created with the counters object.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCWxIiqQAKCRAp8NhrnBAZ
sWJRAPYl06nEfQjRlW//ZE/pO2oKXbfEevg7nnbpe80ERlxLAQDA2LHAcU7ma/NC
hS5yxIq1gLSA27N+5qAoFVK8vJ5ZCg==
=EiAV
-----END PGP SIGNATURE-----
Merge tag 'verbs_flow_counters' of git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git into for-next
Pull verbs counters series from Leon Romanovsky:
====================
Verbs flow counters support
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.: ibv_qp,
ibv_wq, ibv_flow.
The API enables generic counters creation and define mapping to
association with a verbs object, the current mlx5 driver is using this API
for flow counters.
With this API, an application can monitor the entire life cycle of object
activity, defined here as a static counters attachment. This API also
allows dynamic counters monitoring of measurement points for a partial
period in the verbs object life cycle.
In addition it presents the implementation of the generic counters
interface.
This will be achieved by extending flow creation by adding a new flow
count specification type which allows the user to associate a previously
created flow counters using the generic verbs counters interface to the
created flow, once associated the user could read statistics by using the
read function of the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per
objects is a user space only API and this data is passed to kernel when
the counted object (e.g. flow) is created with the counters object.
===================
* tag 'verbs_flow_counters':
IB/mlx5: Add counters read support
IB/mlx5: Add flow counters read support
IB/mlx5: Add flow counters binding support
IB/mlx5: Add counters create and destroy support
IB/uverbs: Add support for flow counters
IB/core: Add support for flow counters
IB/core: Support passing uhw for create_flow
IB/uverbs: Add read counters support
IB/core: Introduce counters read verb
IB/uverbs: Add create/destroy counters support
IB/core: Introduce counters object and its create/destroy
IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure
net/mlx5: Export flow counter related API
net/mlx5: Use flow counter pointer as input to the query function
A counters object could be attached to flow on creation by providing the
counter specification action.
General counters description which count packets and bytes are introduced,
downstream patches from this series will use them as part of flow counters
binding.
In addition, increase number of flow specifications supported layers to 10
upon adding count specification and for the previously added drop
specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is required when user-space drivers need to pass extra information
regarding how to handle this flow steering specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The user supplies counters instance and a reference to an output array of
uint64_t. The driver reads the hardware counters values and writes them
to the output index location in the user supplied array. All counters
values are represented as uint64_t types.
To be able to successfully read the data the counters must be first bound
to an IB object.
Downstream patches will present binding method for flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A verbs application may need to get statistics and info on various aspects
of a verb object (e.g. Flow, QP, ...), in general case the application
will state which object's counters its interested in (we refer to this
action as attach), bind this new counters object to the appropriate verb
object and on later stage read their values using the counters object.
This series introduces a general API for counters object that may
accumulate any ib object counters type, bound and read on demand.
Counters instance is allocated on an IB context and belongs to that
context. Upon successful creation the counters can be bound to a verbs
object so that hardware counter instances can be created and read.
Downstream patches in this series will introduce the attach, bind and the
read functionality.
Counters instance can be de-allocated, upon successful destruction the
related hardware resources are released.
Prior to destroy call the user must first make sure that the counters is
not being used by any IB object, e.g. not attached to any of its counted
type otherwise an EBUSY error is invoked.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Previously, the user had to dig inside the attribute to get the uobject.
Add a helper function that correctly extract it (and do the required
checks) for him/her.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
