IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On PPC64 with KUAP enabled, any kernel code which wants to
access userspace needs to be surrounded by disable-enable KUAP.
But that is not happening for BPF_PROBE_MEM load instruction.
So, when BPF program tries to access invalid userspace address,
page-fault handler considers it as bad KUAP fault:
Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0)
Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM
mode) could either be a valid kernel pointer or NULL but should
never be a pointer to userspace address, execute BPF_PROBE_MEM load
only if addr is kernel address, otherwise set dst_reg=0 and move on.
This will catch NULL, valid or invalid userspace pointers. Only bad
kernel pointer will be handled by BPF exception table.
[Alexei suggested for x86]
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-7-hbathini@linux.ibm.com
BPF load instruction with BPF_PROBE_MEM mode can cause a fault
inside kernel. Append exception table for such instructions
within BPF program.
Unlike other archs which uses extable 'fixup' field to pass dest_reg
and nip, BPF exception table on PowerPC follows the generic PowerPC
exception table design, where it populates both fixup and extable
sections within BPF program. fixup section contains two instructions,
first instruction clears dest_reg and 2nd jumps to next instruction
in the BPF code. extable 'insn' field contains relative offset of
the instruction and 'fixup' field contains relative offset of the
fixup entry. Example layout of BPF program with extable present:
+------------------+
| |
| |
0x4020 -->| ld r27,4(r3) |
| |
| |
0x40ac -->| lwz r3,0(r4) |
| |
| |
|------------------|
0x4280 -->| li r27,0 | \ fixup entry
| b 0x4024 | /
0x4288 -->| li r3,0 |
| b 0x40b0 |
|------------------|
0x4290 -->| insn=0xfffffd90 | \ extable entry
| fixup=0xffffffec | /
0x4298 -->| insn=0xfffffe14 |
| fixup=0xffffffec |
+------------------+
(Addresses shown here are chosen random, not real)
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-6-hbathini@linux.ibm.com
Define and use PPC_RAW_BRANCH() macro instead of open coding it. This
macro is used while adding BPF_PROBE_MEM support.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-5-hbathini@linux.ibm.com
In case of extra_pass, usual JIT passes are always skipped. So,
extra_pass is always false while calling bpf_jit_build_body() and
can be removed.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-3-hbathini@linux.ibm.com
SEEN_STACK is unused on PowerPC. Remove it. Also, have
SEEN_TAILCALL use 0x40000000.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-2-hbathini@linux.ibm.com
The EEH recovery logic in eeh_handle_normal_event() has some pretty strange
flow control. If we remove all the actual recovery logic we're left with
the following skeleton:
if (result != PCI_ERS_RESULT_DISCONNECT) {
...
}
if (result != PCI_ERS_RESULT_DISCONNECT) {
...
}
if (result == PCI_ERS_RESULT_NONE) {
...
}
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
...
}
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
...
}
if (result == PCI_ERS_RESULT_NEED_RESET) {
...
}
if ((result == PCI_ERS_RESULT_RECOVERED) ||
(result == PCI_ERS_RESULT_NONE)) {
...
goto out;
}
/*
* unsuccessful recovery / PCI_ERS_RESULT_DISCONECTED
* handling is here.
*/
...
out:
...
Most of the "if () { ... }" blocks above change "result" to
PCI_ERS_RESULT_DISCONNECTED if an error occurs in that recovery step. This
makes the control flow a bit confusing since it breaks the early-exit
pattern that is generally used in Linux. In any case we end up handling the
error in the final else block so why not just jump there directly? Doing so
also allows us to de-indent a bunch of code.
No functional changes.
[dja: rebase on top of linux-next + my preceeding refactor,
move clearing the EEH_DEV_NO_HANDLER bit above the first goto so that
it is always clear in the error handler code as it was before.]
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015070628.1331635-2-dja@axtens.net
The control flow of eeh_handle_normal_event() is a bit tricky.
Break out one of the error handling paths - rather than be in an else
block, we'll make it part of the regular body of the function and put a
'goto out;' in the true limb of the if.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015070628.1331635-1-dja@axtens.net
On POWER10, the automatic "save & restore" of interrupt context is
always available. Provide a way to deactivate it for tests or
performance.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-11-clg@kaod.org
StoreEOI is activated by default on platforms supporting the feature
(POWER10) and will be used as soon as firmware advertises its
availability. The kernel parameter provides a way to deactivate its
use. It can be still be reactivated through debugfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-10-clg@kaod.org
It can be used to deactivate temporarily StoreEOI for tests or
performance on platforms supporting the feature (POWER10)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-9-clg@kaod.org
The XIVE driver under Linux uses a single interrupt priority and only
one event queue is configured per CPU. Expose the contents under
a 'xive/eqs/cpuX' debugfs file.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-8-clg@kaod.org
and remove the EQ entries output which is not very useful since only
the next two events of the queue are taken into account. We will
improve the dump of the EQ in the next patches.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-7-clg@kaod.org
and fix some compile issues when !CONFIG_DEBUG_FS.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[mpe: Add empty stub to fix !CONFIG_DEBUG_FS build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-5-clg@kaod.org
StoreEOI (the capability to EOI with a store) requires load-after-store
ordering in some cases to be reliable. P10 introduced a new offset for
load operations to enforce correct ordering and the XIVE driver has
the required support since kernel 5.8, commit b1f9be9392
("powerpc/xive: Enforce load-after-store ordering when StoreEOI is active")
Since skiboot v7, StoreEOI support is advertised on P10 with a new flag
on the PowerNV platform. See skiboot commit 4bd7d84afe46 ("xive/p10:
Introduce a new OPAL_XIVE_IRQ_STORE_EOI2 flag"). When detected,
activate the feature.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-4-clg@kaod.org
and extend output of debugfs and xmon with addresses of the ESB
management and trigger pages.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-3-clg@kaod.org
These routines are not on hot code paths and pr_debug() is easier to
activate. Also add a '0x' prefix to hex printed values (HW IRQ number).
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-2-clg@kaod.org
These aren't necessarily POWER9 only, and it's not to say some new
vulnerability may not get discovered on other processors for which
we would like the flexibility of having the workaround enabled by
firmware.
Remove the restriction that the workarounds only apply to POWER9.
However POWER7 and POWER8 are not affected, and they may not have
older firmware that does not advertise this, so clear these workarounds
manually.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[mpe: Incorporate changes from Nick, reword comment slightly.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210503130243.891868-5-npiggin@gmail.com
for_each_node_by_type performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_node_by_type(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-6-git-send-email-Julia.Lawall@lip6.fr
for_each_node_by_name performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e,e1;
local idexpression n;
@@
for_each_node_by_name(n, e1) {
... when != of_node_put(n)
when != e = n
(
return n;
|
+ of_node_put(n);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-7-git-send-email-Julia.Lawall@lip6.fr
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-4-git-send-email-Julia.Lawall@lip6.fr
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e;
local idexpression n;
@@
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr
On POWER9 and newer, rather than the complex HMI synchronisation and
subcore state, have each thread un-apply the guest TB offset before
calling into the early HMI handler.
This allows the subcore state to be avoided, including subcore enter
/ exit guest, which includes an expensive divide that shows up
slightly in profiles.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-54-npiggin@gmail.com
The P9 path uses vc->dpdes only for msgsndp / SMT emulation. This adds
an ordering requirement between vcpu->doorbell_request and vc->dpdes for
no real benefit. Use vcpu->doorbell_request directly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-53-npiggin@gmail.com
This goes further to removing vcores from the P9 path. Also avoid the
memset in favour of explicitly initialising all fields.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-52-npiggin@gmail.com
The P9 path always uses one vcpu per vcore, so none of the vcore, locks,
stolen time, blocking logic, shared waitq, etc., is required.
Remove most of it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-51-npiggin@gmail.com
cpu_in_guest is set to determine if a CPU needs to be IPI'ed to exit
the guest and notice the need_tlb_flush bit.
This can be implemented as a global per-CPU pointer to the currently
running guest instead of per-guest cpumasks, saving 2 atomics per
entry/exit. P7/8 doesn't require cpu_in_guest, nor does a nested HV
(only the L0 does), so move it to the P9 HV path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-50-npiggin@gmail.com
kvm_hstate.in_guest provides the equivalent of MSR[RI]=0 protection,
and it covers the existing MSR[RI]=0 section in late entry and early
exit, so clearing and setting MSR[RI] in those cases does not
actually do anything useful.
Remove the RI manipulation and replace it with comments. Make the
in_guest memory accesses a bit closer to a proper critical section
pattern. This speeds up guest entry/exit performance.
This also removes the MSR[RI] warnings which aren't very interesting
and would cause crashes if they hit due to causing an interrupt in
non-recoverable code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-48-npiggin@gmail.com
slbmfee/slbmfev instructions are very expensive, moreso than a regular
mfspr instruction, so minimising them significantly improves hash guest
exit performance. The slbmfev is only required if slbmfee found a valid
SLB entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-47-npiggin@gmail.com
Rearrange the MSR saving on entry so it does not follow the mtmsrd to
disable interrupts, avoiding a possible RAW scoreboard stall.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-46-npiggin@gmail.com
mftb() is expensive and one can be avoided on nested guest dispatch.
If the time checking code distinguishes between the L0 timer and the
nested HV timer, then both can be tested in the same place with the
same mftb() value.
This also nicely illustrates the relationship between the L0 and nested
HV timers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-45-npiggin@gmail.com
Use the existing TLB flushing logic to IPI the previous CPU and run the
necessary barriers before running a guest vCPU on a new physical CPU,
to do the necessary radix GTSE barriers for handling the case of an
interrupted guest tlbie sequence.
This requires the vCPU TLB flush sequence that is currently just done
on one thread, to be expanded to ensure the other threads execute a
ptesync, because causing them to exit the guest will no longer cause a
ptesync by itself.
This results in more IPIs than the TLB flush logic requires, but it's
a significant win for common case scheduling when the vCPU remains on
the same physical CPU.
This saves about 520 cycles (nearly 10%) on a guest entry+exit micro
benchmark on a POWER9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-44-npiggin@gmail.com
This creates separate functions for old and new paths for vCPU TLB
flushing, which will reduce complexity of the next change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-43-npiggin@gmail.com
Some of the DAWR SPR access is already predicated on dawr_enabled(),
apply this to the remainder of the accesses.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-41-npiggin@gmail.com
Tighten up partition switching code synchronisation and comments.
In particular, hwsync ; isync is required after the last access that is
performed in the context of a partition, before the partition is
switched away from.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-40-npiggin@gmail.com
Linux implements SPR save/restore including storage space for registers
in the task struct for process context switching. Make use of this
similarly to the way we make use of the context switching fp/vec save
restore.
This improves code reuse, allows some stack space to be saved, and helps
with avoiding VRSAVE updates if they are not required.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-39-npiggin@gmail.com
Use HFSCR facility disabling to implement demand faulting for TM, with
a hysteresis counter similar to the load_fp etc counters in context
switching that implement the equivalent demand faulting for userspace
facilities.
This speeds up guest entry/exit by avoiding the register save/restore
when a guest is not frequently using them. When a guest does use them
often, there will be some additional demand fault overhead, but these
are not commonly used facilities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-38-npiggin@gmail.com
Use HFSCR facility disabling to implement demand faulting for EBB, with
a hysteresis counter similar to the load_fp etc counters in context
switching that implement the equivalent demand faulting for userspace
facilities.
This speeds up guest entry/exit by avoiding the register save/restore
when a guest is not frequently using them. When a guest does use them
often, there will be some additional demand fault overhead, but these
are not commonly used facilities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-37-npiggin@gmail.com
Use CPU_FTR_P9_RADIX_PREFETCH_BUG to apply the workaround, to test for
DD2.1 and below processors. This saves a mtSPR in guest entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-35-npiggin@gmail.com
This moves PMU switch to guest as late as possible in entry, and switch
back to host as early as possible at exit. This helps the host get the
most perf coverage of KVM entry/exit code as possible.
This is slightly suboptimal for SPR scheduling point of view when the
PMU is enabled, but when perf is disabled there is no real difference.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-34-npiggin@gmail.com
If TM is not active, only TM register state needs to be saved and
restored, avoiding several mfmsr/mtmsrd instructions and improving
performance.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-33-npiggin@gmail.com
Move register saving and loading from kvmhv_p9_guest_entry() into the HV
and nested entry handlers.
Accesses are scheduled to reduce mtSPR / mfSPR interleaving which
reduces SPR scoreboard stalls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-32-npiggin@gmail.com
Move the part of the guest entry which is specific to nested HV into its
own function. This is just refactoring.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-31-npiggin@gmail.com
Move the P9 guest/host register switching functions to the built-in
P9 entry code, and export it for nested to use as well.
This allows more flexibility in scheduling these supervisor privileged
SPR accesses with the HV privileged and PR SPR accesses in the low level
entry code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-30-npiggin@gmail.com
This juggles SPR switching on the entry and exit sides to be more
symmetric, which makes the next refactoring patch possible with no
functional change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-28-npiggin@gmail.com
Keep better track of the current SPR value in places where
they are to be loaded with a new context, to reduce expensive
mtSPR operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-27-npiggin@gmail.com
Reduce the number of mfTB executed by passing the current timebase
around entry and exit code rather than read it multiple times.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-25-npiggin@gmail.com
Move the TB updates between saving and loading guest and host SPRs,
to improve scheduling by keeping issue-NTC operations together as
much as possible.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-24-npiggin@gmail.com
Change dec_expires to be relative to the guest timebase, and allow
it to be moved into low level P9 guest entry functions, to improve
SPR access scheduling.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-23-npiggin@gmail.com
Small cleanup makes it a bit easier to match up entry and exit
operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-22-npiggin@gmail.com
Moving the mtmsrd after the host SPRs are saved and before the guest
SPRs start to be loaded can prevent an SPR scoreboard stall (because
the mtmsrd is L=1 type which does not cause context synchronisation.
This is also now more convenient to combined with the mtmsrd L=0
instruction to enable facilities just below, but that is not done yet.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-21-npiggin@gmail.com
This reduces the number of mtmsrd required to enable facility bits when
saving/restoring registers, by having the KVM code set all bits up front
rather than using individual facility functions that set their particular
MSR bits.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-20-npiggin@gmail.com
Move the SPR update into its relevant helper function. This will
help with SPR scheduling improvements in later changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-19-npiggin@gmail.com
Processors that support KVM HV do not require read-modify-write of
the CTRL SPR to set/clear their thread's runlatch. Just write 1 or 0
to it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-18-npiggin@gmail.com
The pmcregs_in_use field in the guest VPA can not be trusted to reflect
what the guest is doing with PMU SPRs, so the PMU must always be managed
(stopped) when exiting the guest, and SPR values set when entering the
guest to ensure it can't cause a covert channel or otherwise cause other
guests or the host to misbehave.
So prevent guest access to the PMU with HFSCR[PM] if pmcregs_in_use is
clear, and avoid the PMU SPR access on every partition switch. Guests
that set pmcregs_in_use incorrectly or when first setting it and using
the PMU will take a hypervisor facility unavailable interrupt that will
bring in the PMU SPRs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-16-npiggin@gmail.com
Rather than guest/host save/retsore functions, implement context switch
functions that take care of details like the VPA update for nested.
The reason to split these kind of helpers into explicit save/load
functions is mainly to schedule SPR access nicely, but PMU is a special
case where the load requires mtSPR (to stop counters) and other
difficulties, so there's less possibility to schedule those nicely. The
SPR accesses also have side-effects if the PMU is running, and in later
changes we keep the host PMU running as long as possible so this code
can be better profiled, which also complicates scheduling.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-15-npiggin@gmail.com
Implement the P9 path PMU save/restore code in C, and remove the
POWER9/10 code from the P7/8 path assembly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-14-npiggin@gmail.com
It can be useful in simulators (with very constrained environments)
to allow some PMCs to run from boot so they can be sampled directly
by a test harness, rather than having to run perf.
A previous change freezes counters at boot by default, so provide
a boot time option to un-freeze (plus a bit more flexibility).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-13-npiggin@gmail.com
KVM PMU management code looks for particular frozen/disabled bits in
the PMU registers so it knows whether it must clear them when coming
out of a guest or not. Setting this up helps KVM make these optimisations
without getting confused. Longer term the better approach might be to
move guest/host PMU switching to the perf subsystem.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-12-npiggin@gmail.com
Provide a config option that controls the workaround added by commit
63279eeb7f ("KVM: PPC: Book3S HV: Always save guest pmu for guest
capable of nesting"). The option defaults to y for now, but is expected
to go away within a few releases.
Nested capable guests running with the earlier commit 1782663897
("KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest
SPRs are live") will now indicate the PMU in-use status of their guests,
which means the parent does not need to unconditionally save the PMU for
nested capable guests.
After this latest round of performance optimisations, this option costs
about 540 cycles or 10% entry/exit performance on a POWER9 nested-capable
guest.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
References: 1782663897 ("KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest SPRs are live")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-11-npiggin@gmail.com
This register controls supervisor SPR modifications, and as such is only
relevant for KVM. KVM always sets AMOR to ~0 on guest entry, and never
restores it coming back out to the host, so it can be kept constant and
avoid the mtSPR in KVM guest entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-10-npiggin@gmail.com
HV interrupts may be taken with the MMU enabled when radix guests are
running. Enable LPCR[HAIL] on ISA v3.1 processors for radix guests.
Make this depend on the host LPCR[HAIL] being enabled. Currently that is
always enabled, but having this test means any issue that might require
LPCR[HAIL] to be disabled in the host will not have to be duplicated in
KVM.
This optimisation takes 1380 cycles off a NULL hcall entry+exit micro
benchmark on a POWER10.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-9-npiggin@gmail.com
Rather than have KVM look up the host timer and fiddle with the
irq-work internal details, have the powerpc/time.c code provide a
function for KVM to re-arm the Linux timer code when exiting a
guest.
This is implementation has an improvement over existing code of
marking a decrementer interrupt as soft-pending if a timer has
expired, rather than setting DEC to a -ve value, which tended to
cause host timers to take two interrupts (first hdec to exit the
guest, then the immediate dec).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-8-npiggin@gmail.com
mftb is serialising (dispatch next-to-complete) so it is heavy weight
for a mfspr. Avoid reading it multiple times in the entry or exit paths.
A small number of cycles delay to timers is tolerable.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-7-npiggin@gmail.com
On processors that don't suppress the HDEC exceptions when LPCR[HDICE]=0,
this could help reduce needless guest exits due to leftover exceptions on
entering the guest.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-6-npiggin@gmail.com
There is no need to save away the host DEC value, as it is derived
from the host timer subsystem which maintains the next timer time,
so it can be restored from there.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-5-npiggin@gmail.com
The host Linux timer code arms the decrementer with the value
'decrementers_next_tb - current_tb' using set_dec(), which stores
val - 1 on Book3S-64, which is not quite the same as what KVM does
to re-arm the host decrementer when exiting the guest.
This shouldn't be a significant change, but it makes the logic match
and avoids this small extra change being brought into the next patch.
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-4-npiggin@gmail.com
The TIDR SPR only exists on POWER9. Avoid accessing it when the
feature bit for it is not set.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211123095231.1036501-3-npiggin@gmail.com
Since the commit c118c7303a ("powerpc/32: Fix vmap stack - Do not
activate MMU before reading task struct") a vmap stack overflow
results in a hard lockup. This is because emergency_ctx is still
addressed with its virtual address allthough data MMU is not active
anymore at that time.
Fix it by using a physical address instead.
Fixes: c118c7303a ("powerpc/32: Fix vmap stack - Do not activate MMU before reading task struct")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce30364fb7ccda489272af4a1612b6aa147e1d23.1637227521.git.christophe.leroy@csgroup.eu
The POWER9 ERAT flush instruction is a SLBIA with IH=7, which is a
reserved value on POWER7/8. On POWER8 this invalidates the SLB entries
above index 0, similarly to SLBIA IH=0.
If the SLB entries are invalidated, and then the guest is bypassed, the
host SLB does not get re-loaded, so the bolted entries above 0 will be
lost. This can result in kernel stack access causing a SLB fault.
Kernel stack access causing a SLB fault was responsible for the infamous
mega bug (search "Fix SLB reload bug"). Although since commit
48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C") that
starts using the kernel stack in the SLB miss handler, it might only
result in an infinite loop of SLB faults. In any case it's a bug.
Fix this by only executing the instruction on >= POWER9 where IH=7 is
defined not to invalidate the SLB. POWER7/8 don't require this ERAT
flush.
Fixes: 5008711259 ("KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211119031627.577853-1-npiggin@gmail.com
Fix a bug in copying of sigset_t for 32-bit systems, which caused X to not start.
Fix handling of shared LSIs (rare) with the xive interrupt controller (Power9/10).
Fix missing TOC setup in some KVM code, which could result in oopses depending on kernel
data layout.
Fix DMA mapping when we have persistent memory and only one DMA window available.
Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a recent fix.
A couple of other minor fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater, Christian Zigotzky,
Christophe Leroy, Daniel Axtens, Finn Thain, Greg Kurz, Masahiro Yamada, Nicholas Piggin,
Uwe Kleine-König.
-----BEGIN PGP SIGNATURE-----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=Ss4y
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
- Fix a bug in copying of sigset_t for 32-bit systems, which caused X
to not start.
- Fix handling of shared LSIs (rare) with the xive interrupt controller
(Power9/10).
- Fix missing TOC setup in some KVM code, which could result in oopses
depending on kernel data layout.
- Fix DMA mapping when we have persistent memory and only one DMA
window available.
- Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a
recent fix.
- A couple of other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater,
Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg
Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König.
* tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Change IRQ domain to a tree domain
powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
powerpc/signal32: Fix sigset_t copy
powerpc/book3e: Fix TLBCAM preset at boot
powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window
powerpc/pseries/ddw: simplify enable_ddw()
powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"
powerpc/pseries: Fix numa FORM2 parsing fallback code
powerpc/pseries: rename numa_dist_table to form2_distances
powerpc: clean vdso32 and vdso64 directories
powerpc/83xx/mpc8349emitx: Drop unused variable
KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29c ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c02 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad7 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf07 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f8 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d5 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf1 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* Cleanups for the perf test infrastructure and mapping hugepages
* Avoid contention on mmap_sem when the guests start to run
* Add event channel upcall support to xen_shinfo_test
x86 changes:
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
Generic:
* Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of the two.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGV/PAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMrogf/eAyilGRQL7lLETn3DTVlgLVv82+z
giX11HlUhUmATHIDluj/wVQUjVcY6AO4SnvFaudX7B+mibndkw4L19IubP/koQZu
xnKSJTn+mVANdzz3UdsHl0ujbPdQJaFCIPW6iewbn2GRRZMwA5F3vMK/H09XRApL
I7kq8CPA6sC0I3TPzPN3ROxigexzYunZmGQ4qQe0GUdtxHrJOYQN++ddmWbQoEIC
gdFTyF7CUQ+lmJe0b/Y88yhISFAJCEBuKFlg9tOTuxSfwvPX6lUu+pi+utEx9M+O
ckTSQli/apZ4RVcSzxMIwX/BciYqhqOz5uMG+w4DRlJixtGSHtjiEVxGxw==
=Iij4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
-----BEGIN PGP SIGNATURE-----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=wbBy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 4f86a06e2d ("irqdomain: Make normal and nomap irqdomains
exclusive") introduced an IRQ_DOMAIN_FLAG_NO_MAP flag to isolate the
'nomap' domains still in use under the powerpc arch. With this new
flag, the revmap_tree of the IRQ domain is not used anymore. This
change broke the support of shared LSIs [1] in the XIVE driver because
it was relying on a lookup in the revmap_tree to query previously
mapped interrupts. Linux now creates two distinct IRQ mappings on the
same HW IRQ which can lead to unexpected behavior in the drivers.
The XIVE IRQ domain is not a direct mapping domain and its HW IRQ
interrupt number space is rather large : 1M/socket on POWER9 and
POWER10, change the XIVE driver to use a 'tree' domain type instead.
[1] For instance, a linux KVM guest with virtio-rng and virtio-balloon
devices.
Fixes: 4f86a06e2d ("irqdomain: Make normal and nomap irqdomains exclusive")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116134022.420412-1-clg@kaod.org
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36 ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f52 ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
As spotted and explained in commit c12ab8dbc4 ("powerpc/8xx: Fix
Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST"), the selection
of STRICT_KERNEL_RWX without selecting DEBUG_RODATA_TEST has spotted
the lack of the DIRTY bit in the pinned kernel data TLBs.
This problem should have been detected a lot earlier if things had
been working as expected. But due to an incredible level of chance or
mishap, this went undetected because of a set of bugs: In fact the
DTLBs were not pinned, because instead of setting the reserve bit
in MD_CTR, it was set in MI_CTR that is the register for ITLBs.
But then, another huge bug was there: the physical address was
reset to 0 at the boundary between RO and RW areas, leading to the
same physical space being mapped at both 0xc0000000 and 0xc8000000.
This had by miracle no consequence until now because the entry was
not really pinned so it was overwritten soon enough to go undetected.
Of course, now that we really pin the DTLBs, it must be fixed as well.
Fixes: f76c8f6d25 ("powerpc/8xx: Add function to set pinned TLBs")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Depends-on: c12ab8dbc4 ("powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a21e9a057fe2d247a535aff0d157a54eefee017a.1636963688.git.christophe.leroy@csgroup.eu
The conversion from __copy_from_user() to __get_user() by
commit d3ccc97815 ("powerpc/signal: Use __get_user() to copy
sigset_t") introduced a regression in __get_user_sigset() for
powerpc/32. The bug was subsequently moved into
unsafe_get_user_sigset().
The bug is due to the copied 64 bit value being truncated to
32 bits while being assigned to dst->sig[0]
The regression was reported by users of the Xorg packages distributed in
Debian/powerpc --
"The symptoms are that the fb screen goes blank, with the backlight
remaining on and no errors logged in /var/log; wdm (or startx) run
with no effect (I tried logging in in the blind, with no effect).
And they are hard to kill, requiring 'kill -KILL ...'"
Fix the regression by copying each word of the sigset, not only the
first one.
__get_user_sigset() was tentatively optimised to copy 64 bits at once
in order to minimise KUAP unlock/lock impact, but the unsafe variant
doesn't suffer that, so it can just copy words.
Fixes: 887f3ceb51 ("powerpc/signal32: Convert do_setcontext[_tm]() to user access block")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: Finn Thain <fthain@linux-m68k.org>
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99ef38d61c0eb3f79c68942deb0c35995a93a777.1636966353.git.christophe.leroy@csgroup.eu
Commit 52bda69ae8 ("powerpc/fsl_booke: Tell map_mem_in_cams() if
init is done") was supposed to just add an additional parameter to
map_mem_in_cams() and always set it to 'true' at that time.
But a few call sites were messed up. Fix them.
Fixes: 52bda69ae8 ("powerpc/fsl_booke: Tell map_mem_in_cams() if init is done")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d319f2a9367d4d08fd2154e506101bd5f100feeb.1636967119.git.christophe.leroy@csgroup.eu
There is a possibility of having just one DMA window available with
a limited capacity which the existing code does not handle that well.
If the window is big enough for the system RAM but less than
MAX_PHYSMEM_BITS (which we want when persistent memory is present),
we create 1:1 window and leave persistent memory without DMA.
This disables 1:1 mapping entirely if there is persistent memory and
either:
- the huge DMA window does not cover the entire address space;
- the default DMA window is removed.
This relies on reverted 54fc3c681d
("powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory")
to return the actual amount RAM in ddw_memory_hotplug_max() (posted
separately).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211108040320.3857636-4-aik@ozlabs.ru
This drops rather useless ddw_enabled flag as direct_mapping implies
it anyway.
While at this, fix indents in enable_ddw().
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211108040320.3857636-3-aik@ozlabs.ru
In case the FORM2 distance table from firmware is not the expected size,
there is fallback code that just populates the lookup table as local vs
remote.
However it then continues on to use the distance table. Fix.
Fixes: 1c6b5a7e74 ("powerpc/pseries: Add support for FORM2 associativity")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211109064900.2041386-2-npiggin@gmail.com
The name of the local variable holding the "form2" property address
conflicts with the numa_distance_table global.
This patch does 's/numa_dist_table/form2_distances/g' over the function,
which also renames numa_dist_table_length to form2_distances_length.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211109064900.2041386-1-npiggin@gmail.com
Since commit bce74491c3 ("powerpc/vdso: fix unnecessary rebuilds of
vgettimeofday.o"), "make ARCH=powerpc clean" does not clean up the
arch/powerpc/kernel/{vdso32,vdso64} directories.
Use the subdir- trick to let "make clean" descend into them.
Fixes: bce74491c3 ("powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211109185015.615517-1-masahiroy@kernel.org
Commit 5d354dc35e ("powerpc/83xx/mpc8349emitx: Make
mcu_gpiochip_remove() return void") removed the usage of the variable
ret, but failed to remove the variable itself, resulting in:
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c: In function ‘mcu_remove’:
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c:189:6: error: unused variable ‘ret’ [-Werror=unused-variable]
189 | int ret;
| ^~~
So remove the variable now.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110110739.1072634-1-u.kleine-koenig@pengutronix.de
kvmppc_h_set_dabr(), and kvmppc_h_set_xdabr() which jumps into
it, need to use _GLOBAL_TOC to setup the kernel TOC pointer, because
kvmppc_h_set_dabr() uses LOAD_REG_ADDR() to load dawr_force_enable.
When called from hcall_try_real_mode() we have the kernel TOC in r2,
established near the start of kvmppc_interrupt_hv(), so there is no
issue.
But they can also be called from kvmppc_pseries_do_hcall() which is
module code, so the access ends up happening with the kvm-hv module's
r2, which will not point at dawr_force_enable and could even cause a
fault.
With the current code layout and compilers we haven't observed a fault
in practice, the load hits somewhere in kvm-hv.ko and silently returns
some bogus value.
Note that we we expect p8/p9 guests to use the DAWR, but SLOF uses
h_set_dabr() to test if sc1 works correctly, see SLOF's
lib/libhvcall/brokensc1.c.
Fixes: c1fe190c06 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210923151031.72408-1-mpe@ellerman.id.au
MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a
source page was already locked during migrate_vma_collect(). If it
wasn't then the a second attempt is made to lock the page. However if
the first attempt failed it's unlikely a second attempt will succeed,
and the retry adds complexity. So clean this up by removing the retry
and MIGRATE_PFN_LOCKED flag.
Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag
set, but nothing actually checks that.
Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
This is a single cleanup from Peter Collingbourne, removing
some dead code.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGKm+kACgkQmmx57+YA
GNkksg/7BUxJrWFrQmLA3fhzh4wG3KswdrKTGQMf0jRVI1n77vmdfig3hEJmMekH
0SZoIYmPztOSj34+6p4NxuqY/Sk62oYLr8Awo8ZLDhIBWNUJE8UWC07Qb/3DpGbp
JfD7/8mXu10htgM85aGlhaVLnHvvqUBR8PlkJUGNxuY5Gy2L+eCkpwCAYlZpSOqr
vs0BJWFY1LzO1POcjIq4/IM0PvcU2ncLB5XoxDjjIIWnWKyHzWY21ZvoeaNumvou
xqQ/Hj8Sc+ufS0yNlSgIC+bJP0bp1bSw/dALKr8oYxLt7X9LELVY3WXyRH+It4nS
b6HPYmga26NVq/u7RrylBA+2fRCDB8E6z73gHt4SeHrRDEvFjhNzIyV+aXPae/dY
XI/pjiwpG6k6FpSnF69YZJ/Y+GmUA90V/Jq8aLFZhGz8SgpjRl+2foEUSDhRVXCA
jGB1Y388m0e6jPlVJROB7ORzXMd8K5iciyUGqtAI87QCOtPozn10ruh5RdziguKm
kDW5IKy9E4l1ch8WRprVbgV5Ew+QWKS1JIbyjDaX3jN0lUPCqgwkwvRxxtgdFnVA
Lq5BiUdraSWFUr84rLU3gCRU0+VoEdyZYI+bQGGNlQ4ovmLYU1nLmCU/azMvSEgz
ZsoM5YdffShxUtfwMg+W67RpYOjSnV55ZzwN0+d1C2oqz9xECXc=
=8EFP
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanup from Arnd Bergmann:
"This is a single cleanup from Peter Collingbourne, removing some dead
code"
* tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: remove unused function syscall_set_arguments()
printk from NMI context relies on irq work being raised on the local CPU
to print to console. This can be a problem if the NMI was raised by a
lockup detector to print lockup stack and regs, because the CPU may not
enable irqs (because it is locked up).
Introduce printk_trigger_flush() that can be called another CPU to try
to get those messages to the console, call that where printk_safe_flush
was previously called.
Fixes: 93d102f094 ("printk: remove safe buffers")
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211107045116.1754411-1-npiggin@gmail.com
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up open
coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs. 'cxl_test'
is a module built from tools/testing/cxl/ that mocks up a CXL topology
to augment the nascent support for emulation of CXL devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver and
core-infrastructure buckets. For example, mailbox handling is now a
generic core capability consumed by the PCI and cxl_test drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYYRtyQAKCRDfioYZHlFs
Z7UsAP9DzUN6IWWnYk1R95YXYVxFriRtRsBjujAqTg49EMghawEAoHaA9lxO3Hho
l25TLYUOmB/zFTlUbe6YQptMJZ5YLwY=
=im9j
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"More preparation and plumbing work in the CXL subsystem.
From an end user perspective the highlight here is lighting up the CXL
Persistent Memory related commands (label read / write) with the
generic ioctl() front-end in LIBNVDIMM.
Otherwise, the ability to instantiate new persistent and volatile
memory regions is still on track for v5.17.
Summary:
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up
open coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs.
'cxl_test' is a module built from tools/testing/cxl/ that mocks up
a CXL topology to augment the nascent support for emulation of CXL
devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver
and core-infrastructure buckets. For example, mailbox handling is
now a generic core capability consumed by the PCI and cxl_test
drivers"
* tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
ocxl: Use pci core's DVSEC functionality
cxl/pci: Use pci core's DVSEC functionality
PCI: Add pci_find_dvsec_capability to find designated VSEC
cxl/pci: Split cxl_pci_setup_regs()
cxl/pci: Add @base to cxl_register_map
cxl/pci: Make more use of cxl_register_map
cxl/pci: Remove pci request/release regions
cxl/pci: Fix NULL vs ERR_PTR confusion
cxl/pci: Remove dev_dbg for unknown register blocks
cxl/pci: Convert register block identifiers to an enum
cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS
cxl/pci: Disambiguate cxl_pci further from cxl_mem
Documentation/cxl: Add bus internal docs
cxl/core: Split decoder setup into alloc + add
tools/testing/cxl: Introduce a mock memory device + driver
cxl/mbox: Move command definitions to common location
cxl/bus: Populate the target list at decoder create
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy
cxl/pmem: Add support for multiple nvdimm-bridge objects
cxl/pmem: Translate NVDIMM label commands to CXL label commands
...
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmGGkysVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGgZkQAIX4i9Tt6pyl/2xGDGkzUqjprfoH
QUIo1DoUclLUygoakrrrX3EnZLWrslgPTKjQxdiV6RA6xHfe4cYgNTSq8zM9lsPT
lu+B4nEDqoXQ5gyLxMlnjS3FRQTNYIeBZEhSAIiW8TENdLKlKc+NYdoj7th50dO0
SkXRa2dpWHa6t7ZRqHIHMpUWA7gm0w22ZbgQmyUv1CDGO4IHPLqe2b2PMsrzhSZ1
yypP1l6aQVKuP0hN9aytbTRqDxUd0uOzBf00PK5zx23hjdwZ9wmZrFTKDf9fAu/+
nR7gBsa5YoYNQh3UkayZXjR5dClmgsCXZ25OXI7YucQp/8OJ5fadfn1NFpJHsw56
n5cckbHIXgnFUcel5YlkR6qTHjpzdr9vHm90MmiuX99b3oy9czl6pY3qkNfRkllQ
v7ME5L1qlw3P3ia1KA+H4zW/LIJ8p5cbKBwaY22m3kY3bTx7PiOfMlep4UVqxXSb
0/OqxSsmYg5LlmwEQ0SSsx45hE0o9nG/cdjkHu1jUOUHxYfpt1T4MTILeGUwmjzd
TydJym5MZyXBawu4NVB3QLoKm5Jt2BXtyaWOtq74VSrs77roNCdYuQWJ+1aBf2Pg
0s4CVC2cC7KlxJDImoqswZATGXPMfbiVDcuVSSukYRgBMeCBPUzRhB8YP36BZyD3
9vFYmqSujtUU7nWb
=ATFN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
-----BEGIN PGP SIGNATURE-----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=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
This has served its purpose and is no longer used. All usercopy
violations appear to have been handled by now, any remaining instances
(or new bugs) will cause copies to be rejected.
This isn't a direct revert of commit 2d891fbc3b ("usercopy: Allow
strict enforcement of whitelists"); since usercopy_fallback is
effectively 0, the fallback handling is removed too.
This also removes the usercopy_fallback module parameter on slab_common.
Link: https://github.com/KSPP/linux/issues/153
Link: https://lkml.kernel.org/r/20210921061149.1091163-1-steve@sk2.org
Signed-off-by: Stephen Kitt <steve@sk2.org>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Stanley <joel@jms.id.au> [defconfig change]
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E . Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for
CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use
CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE.
Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can specify the number of hugepages to allocate at boot. But the
hugepages is balanced in all nodes at present. In some scenarios, we
only need hugepages in one node. For example: DPDK needs hugepages
which are in the same node as NIC.
If DPDK needs four hugepages of 1G size in node1 and system has 16 numa
nodes we must reserve 64 hugepages on the kernel cmdline. But only four
hugepages are used. The others should be free after boot. If the
system memory is low(for example: 64G), it will be an impossible task.
So extend the hugepages parameter to support specifying hugepages on a
specific node. For example add following parameter:
hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zhenguo Yao <yaozhenguo1@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().
Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().
Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generic version of arch_is_kernel_initmem_freed() now does the same
as powerpc version.
Remove the powerpc version.
Link: https://lkml.kernel.org/r/c53764eb45d41491e2b21da2e7812239897dbebb.1633001016.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Drop the struct pci_dev.driver pointer, which is redundant with the
struct device.driver pointer (Uwe Kleine-König)
* pci/driver:
PCI: Remove struct pci_dev->driver
PCI: Use to_pci_driver() instead of pci_dev->driver
x86/pci/probe_roms: Use to_pci_driver() instead of pci_dev->driver
perf/x86/intel/uncore: Use to_pci_driver() instead of pci_dev->driver
powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver
usb: xhci: Use to_pci_driver() instead of pci_dev->driver
cxl: Use to_pci_driver() instead of pci_dev->driver
cxl: Factor out common dev->driver expressions
xen/pcifront: Use to_pci_driver() instead of pci_dev->driver
xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv
nfp: use dev_driver_string() instead of pci_dev->driver->name
mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->name
net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->name
net: hns3: use dev_driver_string() instead of pci_dev->driver->name
crypto: hisilicon - use dev_driver_string() instead of pci_dev->driver->name
powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->name
ssb: Use dev_driver_string() instead of pci_dev->driver->name
bcma: simplify reference to driver name
crypto: qat - simplify adf_enable_aer()
scsi: message: fusion: Remove unused mpt_pci driver .probe() 'id' parameter
PCI/ERR: Factor out common dev->driver expressions
PCI: Drop pci_device_probe() test of !pci_dev->driver
PCI: Drop pci_device_remove() test of pci_dev->driver
PCI: Return NULL for to_pci_driver(NULL)
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault().
- Fix several bugs on pseries in handling of device tree cache information for hotplugged
CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan,
Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel
Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo
A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring,
Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, Xiaoming Ni,
-----BEGIN PGP SIGNATURE-----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=f7HE
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.
- Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it
to be disabled.
- Add support for out-of-line static calls on 32-bit.
- Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.
- Fix boot hangs on e5500 due to stale value in ESR passed to
do_page_fault().
- Fix several bugs on pseries in handling of device tree cache
information for hotplugged CPUs, and/or during partition migration.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin,
Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le
Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis
Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari
Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas
Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar
Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, and Xiaoming Ni,
* tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits)
powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
powerpc/32e: Ignore ESR in instruction storage interrupt handler
powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload
powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC
MAINTAINERS: Update powerpc KVM entry
powerpc/xmon: fix task state output
powerpc/44x/fsp2: add missing of_node_put
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling
powerpc/security: Use a mutex for interrupt exit code patching
powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void
powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs
powerpc/book3e: Fix set_memory_x() and set_memory_nx()
powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
powerpc/bpf: Fix write protecting JIT code
selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh
powerpc/64s/interrupt: Fix check_return_regs_valid() false positive
powerpc/boot: Set LC_ALL=C in wrapper script
powerpc/64s: Default to 64K pages for 64 bit book3s
Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"
...
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089,
tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards,
and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
-----BEGIN PGP SIGNATURE-----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=dQa6
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock. In the most basic scenario, that buffer will not be
resident and it will be mapped to the same file. Accessing the buffer
will trigger a page fault, and gfs2 will deadlock trying to take the
same inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled.
-----BEGIN PGP SIGNATURE-----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=WeNd
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
-----BEGIN PGP SIGNATURE-----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=WrEw
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Add some additional audit logging to capture the openat2() syscall
open_how struct info.
Previous variations of the open()/openat() syscalls allowed audit
admins to inspect the syscall args to get the information contained in
the new open_how struct used in openat2()"
* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: return early if the filter rule has a lower priority
audit: add OPENAT2 record to list "how" info
audit: add support for the openat2 syscall
audit: replace magic audit syscall class numbers with macros
lsm_audit: avoid overloading the "key" audit field
audit: Convert to SPDX identifier
audit: rename struct node to struct audit_node to prevent future name collisions
- kprobes: Restructured stack unwinder to show properly on x86 when a stack
dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only denying
others). There's been pressure to allow non root to tracefs in a
controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function tracer
instead of having its own trampoline (this change will happen on an arch
by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform calculations
against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent warnings
from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over if
branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki
Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4=
=Loz8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
Hi Linus,
Please, pull the following hardening fixes and cleanups that I've
been collecting during the last development cycle. All of them have
been baking in linux-next.
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments (Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic (Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmGAWzsACgkQRwW0y0cG
2zF55A/+PTBZKg0XLQkPZ7HFipobeZpfvM0dU4JutwN6Kts1RmMRftPn6ootY18v
4tWR4jXcnblvEr7UTgYAl6QQdytFXZKOK+JKMWV8LXLqyNGF6sS2PmA6zk/iQoa5
1q0IKUaaqLIXwmm3xoz+/uNHsb+kfjYOHZpHA6HhYZQFDyShW7+hhIeS1NauJo2X
op3IWasMumrawPkCJZ0ZJJQLELtZNGt4gHnOjB1MAYhOTAokowgeeDNtyfoJ9j1L
iL8kimphVLI35H/GERBozmqdqRGIIZLlQF4P66VfNNEXSDoKOemAKDSFrfmYoVwE
kdh6fqeKPV/aRImrCtNthfpiEjqEpm8afQGMC5H5uPnZontUX9tcU1Qagg0vwYx0
fLZ8mMuNQK5AZfugK+1+2ShfBYUlhvWRhQdtjC9nIAoO80NqouWB7QD0zIHC2WV7
durdlhzxik70ISnXqKmTR6bQNcXB6kFLPR30RpcA3E6+AgwlkP0FmaD3e+sDttJ0
vtxDMHqMMNNzOWlLW2eqEdKMEfoU0gLyRt5iM7EN6R8HUXwup5f9bu7V4LuCnR6y
FAX4tEa8b5wg01zNfyWClCccU6tetSeXjdrhdIk7szQVsOsYXc4zxDrp6xvqsAh2
B7GbGk5qeUzM/O7QWNIl+5s/NhUjEzQ3QiQebRDdjVyINU2OKsI=
=Jk0U
-----END PGP SIGNATURE-----
Merge tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull hardening fixes and cleanups from Gustavo A. R. Silva:
"Various hardening fixes and cleanups that I've been collecting during
the last development cycle:
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic
helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments
(Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len
Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
(Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len
Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"
* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
firewire: Remove function callback casts
nouveau/svm: Use kvcalloc() instead of kvzalloc()
firmware/psci: fix application of sizeof to pointer
dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
KVM: PPC: Replace zero-length array with flexible array member
aio: Prefer struct_size over open coded arithmetic
writeback: prefer struct_size over open coded arithmetic
xfs: Use kvcalloc() instead of kvzalloc()
assoc_array: Avoid open coded arithmetic in allocator arguments
Cross-architecture update to move task_struct::cpu back into thread_info
on arm64, x86, s390, powerpc, and riscv. All Acked by arch maintainers.
Quoting Ard Biesheuvel:
"Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that define
raw_smp_processor_id() in terms of this field, as it requires
linux/sched.h to be included, which causes a lot of pain in terms of
circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from) for all
architectures that enable THREAD_INFO_IN_TASK, addressing the header
soup issue as well as some pointless differences in the implementations
of task_cpu() and set_task_cpu()."
-----BEGIN PGP SIGNATURE-----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=PzvV
-----END PGP SIGNATURE-----
Merge tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull thread_info update to move 'cpu' back from task_struct from Kees Cook:
"Cross-architecture update to move task_struct::cpu back into
thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch
maintainers.
Quoting Ard Biesheuvel:
'Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that
define raw_smp_processor_id() in terms of this field, as it
requires linux/sched.h to be included, which causes a lot of pain
in terms of circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from)
for all architectures that enable THREAD_INFO_IN_TASK, addressing
the header soup issue as well as some pointless differences in the
implementations of task_cpu() and set_task_cpu()'"
* tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
riscv: rely on core code to keep thread_info::cpu updated
powerpc: smp: remove hack to obtain offset of task_struct::cpu
sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y
powerpc: add CPU field to struct thread_info
s390: add CPU field to struct thread_info
x86: add CPU field to struct thread_info
arm64: add CPU field to struct thread_info
by confidential computing solutions to query different aspects of the
system. The intent behind it is to unify testing of such aspects instead
of having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess.
-----BEGIN PGP SIGNATURE-----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=Na0U
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov:
"Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the
system.
The intent behind it is to unify testing of such aspects instead of
having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess"
* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_active() with cc_platform_has()
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
x86/sev: Add an x86 version of cc_platform_has()
arch/cc: Introduce a function to check for confidential computing features
x86/ioremap: Selectively build arch override encryption functions
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes. The main use case is emulating Windows' WaitForMultipleObjects
which allows Wine to improve the performance of Windows Games. Also
native Linux games can benefit from this interface as this is a common
wait pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to rework
their eviction code step by step without making lockdep upset until the
final steps of rework are completed. It's also useful for regulator and
TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
-----BEGIN PGP SIGNATURE-----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=RZ4x
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
core:
- Allow ftrace to instrument parts of the perf core code
- Add a new mem_hops field to perf_mem_data_src which allows to represent
intra-node/package or inter-node/off-package details to prepare for
next generation systems which have more hieararchy within the
node/pacakge level.
tools:
- Update for the new mem_hops field in perf_mem_data_src
arch:
- A set of constraints fixes for the Intel uncore PMU
- The usual set of small fixes and improvements for x86 and PPC
-----BEGIN PGP SIGNATURE-----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=Oj0G
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Core:
- Allow ftrace to instrument parts of the perf core code
- Add a new mem_hops field to perf_mem_data_src which allows to
represent intra-node/package or inter-node/off-package details to
prepare for next generation systems which have more hieararchy
within the node/pacakge level.
Tools:
- Update for the new mem_hops field in perf_mem_data_src
Arch:
- A set of constraints fixes for the Intel uncore PMU
- The usual set of small fixes and improvements for x86 and PPC"
* tag 'perf-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings
powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
tools/perf: Add mem_hops field in perf_mem_data_src structure
perf: Add mem_hops field in perf_mem_data_src structure
perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line
perf/core: Allow ftrace for functions in kernel/event/core.c
perf/x86: Add new event for AUX output counter index
perf/x86: Add compiler barrier after updating BTS
perf/x86/intel/uncore: Fix Intel SPR M3UPI event constraints
perf/x86/intel/uncore: Fix Intel SPR M2PCIE event constraints
perf/x86/intel/uncore: Fix Intel SPR IIO event constraints
perf/x86/intel/uncore: Fix Intel SPR CHA event constraints
perf/x86/intel/uncore: Fix Intel ICX IIO event constraints
perf/x86/intel/uncore: Fix invalid unit check
perf/x86/intel/uncore: Support extra IMC channel on Ice Lake server
-----BEGIN PGP SIGNATURE-----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=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
parisc, ia64 and powerpc32 are the only remaining architectures that
provide custom arch_{spin,read,write}_lock_flags() functions, which are
meant to re-enable interrupts while waiting for a spinlock.
However, none of these can actually run into this codepath, because
it is only called on architectures without CONFIG_GENERIC_LOCKBREAK,
or when CONFIG_DEBUG_LOCK_ALLOC is set without CONFIG_LOCKDEP, and none
of those combinations are possible on the three architectures.
Going back in the git history, it appears that arch/mn10300 may have
been able to run into this code path, but there is a good chance that
it never worked. On the architectures that still exist, it was
already impossible to hit back in 2008 after the introduction of
CONFIG_GENERIC_LOCKBREAK, and possibly earlier.
As this is all dead code, just remove it and the helper functions built
around it. For arch/ia64, the inline asm could be cleaned up, but
it seems safer to leave it untouched.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20211022120058.1031690-1-arnd@kernel.org
Three commits fixing some issues introduced with the recent IOMMU changes we merged.
Thanks to: Alexey Kardashevskiy
-----BEGIN PGP SIGNATURE-----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=R9Yq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three commits fixing some issues introduced with the recent IOMMU
changes we merged.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present
powerpc/pseries/iommu: Check if the default window in use before removing it
powerpc/pseries/iommu: Use correct vfree for it_map
Now that force_fatal_sig exists it is unnecessary and a bit confusing
to use force_sigsegv in cases where the simpler force_fatal_sig is
wanted. So change every instance we can to make the code clearer.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reduce maintenance burden of DVSEC query implementation by using the
centralized PCI core implementation.
There are two obvious places to simply drop in the new core
implementation. There remains find_dvsec_from_pos() which would benefit
from using a core implementation. As that change is less trivial it is
reserved for later.
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> (v1)
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/163379789065.692348.7117946955275586530.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A e5500 machine running a 32-bit kernel sometimes hangs at boot,
seemingly going into an infinite loop of instruction storage interrupts.
The ESR (Exception Syndrome Register) has a value of 0x800000 (store)
when this happens, which is likely set by a previous store. An
instruction TLB miss interrupt would then leave ESR unchanged, and if no
PTE exists it calls directly to the instruction storage interrupt
handler without changing ESR.
access_error() does not cause a segfault due to a store to a read-only
vma because is_exec is true. Most subsequent fault handling does not
check for a write fault on a read-only vma, and might do strange things
like create a writeable PTE or call page_mkwrite on a read only vma or
file. It's not clear what happens here to cause the infinite faulting in
this case, a fault handler failure or low level PTE or TLB handling.
In any case this can be fixed by having the instruction storage
interrupt zero regs->dsisr rather than storing the ESR value to it.
Fixes: a01a3f2ddb ("powerpc: remove arguments from fault handler functions")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Jacques de Laval <jacques.delaval@protonmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Jacques de Laval <jacques.delaval@protonmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211028133043.4159501-1-npiggin@gmail.com
When ARCH_SUPPORTS_DEBUG_PAGEALLOC is not selected, the user can
still select CONFIG_DEBUG_PAGEALLOC in which case __kernel_map_pages()
is provided by mm/page_poison.c
So only define __kernel_map_pages() when both
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC and CONFIG_DEBUG_PAGEALLOC
are defined.
Fixes: 68b44f94d6 ("powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/971b69739ff4746252e711a9845210465c023a9e.1635425947.git.christophe.leroy@csgroup.eu
Early exits from for_each_compatible_node() should decrement the
node reference counter. Reported by Coccinelle:
./arch/powerpc/platforms/44x/fsp2.c:206:1-25: WARNING: Function
"for_each_compatible_node" should have of_node_put() before return
around line 218.
Fixes: 7813043e1b ("powerpc/44x/fsp2: Add irq error handlers")
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1635406102-88719-1-git-send-email-cuibixuan@linux.alibaba.com
In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:
cmpli cr0,r3,1024
This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.
It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.
dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.
Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:
arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
cmpli 0,%r3,1024; ...
^
Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Commit 112665286d ("KVM: PPC: Book3S HV: Context tracking exit guest
context before enabling irqs") moved guest_exit() into the interrupt
protected area to avoid wrong context warning (or worse). The problem is
that tick-based time accounting has not yet been updated at this point
(because it depends on the timer interrupt firing), so the guest time
gets incorrectly accounted to system time.
To fix the problem, follow the x86 fix in commit 1604571401 ("Defer
vtime accounting 'til after IRQ handling"), and allow host IRQs to run
before accounting the guest exit time.
In the case vtime accounting is enabled, this is not required because TB
is used directly for accounting.
Before this patch, with CONFIG_TICK_CPU_ACCOUNTING=y in the host and a
guest running a kernel compile, the 'guest' fields of /proc/stat are
stuck at zero. With the patch they can be observed increasing roughly as
expected.
Fixes: e233d54d4d ("KVM: booke: use __kvm_guest_exit")
Fixes: 112665286d ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs")
Cc: stable@vger.kernel.org # 5.12+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
[np: only required for tick accounting, add Book3E fix, tweak changelog]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211027142150.3711582-1-npiggin@gmail.com
The mitigation-patching.sh script in the powerpc selftests toggles
all mitigations on and off simultaneously, revealing that rfi_flush
and stf_barrier cannot safely operate at the same time due to races
in updating the static key.
On some systems, the static key code throws a warning and the kernel
remains functional. On others, the kernel will hang or crash.
Fix this by slapping on a mutex.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211027072410.40950-1-ruscur@russell.cc
As the documentation explained, ftrace_test_recursion_trylock()
and ftrace_test_recursion_unlock() were supposed to disable and
enable preemption properly, however currently this work is done
outside of the function, which could be missing by mistake.
And since the internal using of trace_test_and_set_recursion()
and trace_clear_recursion() also require preemption disabled, we
can just merge the logical.
This patch will make sure the preemption has been disabled when
trace_test_and_set_recursion() return bit >= 0, and
trace_clear_recursion() will enable the preemption if previously
enabled.
Link: https://lkml.kernel.org/r/13bde807-779c-aa4c-0672-20515ae365ea@linux.alibaba.com
CC: Petr Mladek <pmladek@suse.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Miroslav Benes <mbenes@suse.cz>
Reported-by: Abaci <abaci@linux.alibaba.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
[ Removed extra line in comment - SDR ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Up to now mcu_gpiochip_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211021105657.72572-1-u.kleine-koenig@pengutronix.de
Building tqm8541_defconfig results in:
arch/powerpc/mm/nohash/fsl_book3e.c: In function 'settlbcam':
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: error: '_PAGE_BAP_SX' undeclared (first use in this function)
126 | TLBCAM[index].MAS3 |= (flags & _PAGE_BAP_SX) ? MAS3_SX : 0;
| ^~~~~~~~~~~~
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [scripts/Makefile.build:277: arch/powerpc/mm/nohash/fsl_book3e.o] Error 1
make[2]: *** [scripts/Makefile.build:540: arch/powerpc/mm/nohash] Error 2
make[1]: *** [scripts/Makefile.build:540: arch/powerpc/mm] Error 2
make: *** [Makefile:1868: arch/powerpc] Error 2
This is because _PAGE_BAP_SX is not defined when using 32 bits PTE.
Now that _PAGE_EXEC contains both _PAGE_BAP_SX and _PAGE_BAP_UX, it can be used instead.
Fixes: 01116e6e98 ("powerpc/fsl_booke: Take exec flag into account when setting TLBCAMs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91a0235e7f2a85308b84aa5b9efd8d022e2b899a.1635226743.git.christophe.leroy@csgroup.eu
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c41100f9c144dc5b62e5a751b810190c6b5d42fd.1635226743.git.christophe.leroy@csgroup.eu
Commit 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
changed those two functions to use pte helpers to determine which
bits to clear and which bits to set.
This change was based on the assumption that bits to be set/cleared
are always the same and can be determined by applying the pte
manipulation helpers on __pte(0).
But on platforms like book3e, the bits depend on whether the page
is a user page or not.
For the time being it more or less works because of _PAGE_EXEC being
used for user pages only and exec right being set at all time on
kernel page. But following patch will clean that and output of
pte_mkexec() will depend on the page being a user or kernel page.
Instead of trying to make an even more complicated helper where bits
would become dependent on the final pte value, come back to a more
static situation like before commit 26973fa5ac ("powerpc/mm: use
pte helpers in generic code"), by introducing an 8xx specific
version of __ptep_set_access_flags() and ptep_set_wrprotect().
Fixes: 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/922bdab3a220781bae2360ff3dd5adb7fe4d34f1.1635226743.git.christophe.leroy@csgroup.eu
Running program with bpf-to-bpf function calls results in data access
exception (0x300) with the below call trace:
bpf_int_jit_compile+0x238/0x750 (unreliable)
bpf_check+0x2008/0x2710
bpf_prog_load+0xb00/0x13a0
__sys_bpf+0x6f4/0x27c0
sys_bpf+0x2c/0x40
system_call_exception+0x164/0x330
system_call_vectored_common+0xe8/0x278
as bpf_int_jit_compile() tries writing to write protected JIT code
location during the extra pass.
Fix it by holding off write protection of JIT code until the extra
pass, where branch target addresses fixup happens.
Fixes: 62e3d4210a ("powerpc/bpf: Write protect JIT code")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211025055649.114728-1-hbathini@linux.ibm.com
The check_return_regs_valid() can cause a false positive if the return
regs are marked as norestart and they are an HSRR type interrupt,
because the low bit in the bottom of regs->trap causes interrupt type
matching to fail.
This can occcur for example on bare metal with a HV privileged doorbell
interrupt that causes a signal, but do_signal returns early because
get_signal() fails, and takes the "No signal to deliver" path. In this
case no signal was delivered so the return location is not changed so
return SRRs are not invalidated, yet set_trap_norestart is called, which
messes up the match. Building go-1.16.6 is known to reproduce this.
Fix it by using the TRAP() accessor which masks out the low bit.
Fixes: 6eaaf9de35 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211026122531.3599918-1-npiggin@gmail.com
While trying to build a simple Image for ACADIA platform, I got the
following error:
WRAP arch/powerpc/boot/simpleImage.acadia
INFO: Uncompressed kernel (size 0x6ae7d0) overlaps the address of the wrapper(0x400000)
INFO: Fixing the link_address of wrapper to (0x700000)
powerpc64-linux-gnu-ld : mode d'émulation non reconnu : -T
Émulations prises en charge : elf64ppc elf32ppc elf32ppclinux elf32ppcsim elf64lppc elf32lppc elf32lppclinux elf32lppcsim
make[1]: *** [arch/powerpc/boot/Makefile:424 : arch/powerpc/boot/simpleImage.acadia] Erreur 1
make: *** [arch/powerpc/Makefile:285 : simpleImage.acadia] Erreur 2
Trying again with V=1 shows the following command
powerpc64-linux-gnu-ld -m -T arch/powerpc/boot/zImage.lds -Ttext 0x700000 --no-dynamic-linker -o arch/powerpc/boot/simpleImage.acadia -Map wrapper.map arch/powerpc/boot/fixed-head.o arch/powerpc/boot/simpleboot.o ./zImage.3278022.o arch/powerpc/boot/wrapper.a
The argument of '-m' is missing.
This is due to the wrapper script calling 'objdump -p vmlinux' and
looking for 'file format', whereas the output of objdump is:
vmlinux: format de fichier elf32-powerpc
En-tête de programme:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Add LC_ALL=C at the beginning of the wrapper script in order to get the
output expected by the script:
vmlinux: file format elf32-powerpc
Program Header:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9ff3bc98035f63b122c051f02dc47c7aed10430.1635256089.git.christophe.leroy@csgroup.eu
For 64-bit book3s the default should be 64K as that's what modern CPUs
are designed for.
The following defconfigs already set CONFIG_PPC_64K_PAGES:
cell_defconfig
pasemi_defconfig
powernv_defconfig
ppc64_defconfig
pseries_defconfig
skiroot_defconfig
The have the option removed from the defconfig, as it is now the
default.
The defconfigs that now need to set CONFIG_PPC_4K_PAGES to maintain
their existing behaviour are:
g5_defconfig
maple_defconfig
microwatt_defconfig
ps3_defconfig
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/109
Link: https://lore.kernel.org/r/20211015001649.45591-1-joel@jms.id.au
This reverts commit 566af8cda3.
This caused some conflicts vs the audit tree, and the audit maintainers
would prefer we postpone this to the next merge window so we have more
time for testing.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the register state may be partial and corrupted instead of calling
do_exit, call force_sigsegv(SIGSEGV). Which properly kills the
process with SIGSEGV and does not let any more userspace code execute,
instead of just killing one thread of the process and potentially
confusing everything.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: 756f1ae8a44e ("PPC32: Rework signal code and add a swapcontext system call.")
Fixes: 04879b04bf50 ("[PATCH] ppc64: VMX (Altivec) support & signal32 rework, from Ben Herrenschmidt")
Link: https://lkml.kernel.org/r/20211020174406.17889-7-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The iommu_init_table() helper takes an address range to reserve in
the IOMMU table being initialized to exclude MMIO addresses, this is
useful if the window stretches far beyond 4GB (although wastes some TCEs).
At the moment the code searches for such MMIO32 range and fails if none
found which is considered a problem while it really is not: it is actually
better as this says there is no MMIO32 to reserve and we can use
usually wasted TCEs. Furthermore PHYP never actually allows creating
windows starting at busaddress=0 so this MMIO32 range is never useful.
This removes error exit and initializes the table with zero range if
no MMIO32 is detected.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-5-aik@ozlabs.ru
At the moment this check is performed after we remove the default window
which is late and disallows to revert whatever changes enable_ddw()
has made to DMA windows.
This moves the check and error exit before removing the window.
This raised the message severity from "debug" to "warning" as this
should not happen in practice and cannot be triggered by the userspace.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-4-aik@ozlabs.ru
The it_map array is vzalloc'ed so use vfree() for it when creating
a huge DMA window failed for whatever reason.
While at this, write zero to it_map.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-3-aik@ozlabs.ru
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d516 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
On VMs with NX encryption, compression, and/or RNG offload, these
capabilities are described by nodes in the ibm,platform-facilities device
tree hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
├── ibm,compression-v1
├── ibm,random-v1
└── ibm,sym-encryption-v1
3 directories
The acceleration functions that these nodes describe are not disrupted by
live migration, not even temporarily.
But the post-migration ibm,update-nodes sequence firmware always sends
"delete" messages for this hierarchy, followed by an "add" directive to
reconstruct it via ibm,configure-connector (log with debugging statements
enabled in mobility.c):
mobility: removing node /ibm,platform-facilities/ibm,random-v1:4294967285
mobility: removing node /ibm,platform-facilities/ibm,compression-v1:4294967284
mobility: removing node /ibm,platform-facilities/ibm,sym-encryption-v1:4294967283
mobility: removing node /ibm,platform-facilities:4294967286
...
mobility: added node /ibm,platform-facilities:4294967286
Note we receive a single "add" message for the entire hierarchy, and what
we receive from the ibm,configure-connector sequence is the top-level
platform-facilities node along with its three children. The debug message
simply reports the parent node and not the whole subtree.
Also, significantly, the nodes added are almost completely equivalent to
the ones removed; even phandles are unchanged. ibm,shared-interrupt-pool in
the leaf nodes is the only property I've observed to differ, and Linux does
not use that. So in practice, the sum of update messages Linux receives for
this hierarchy is equivalent to minor property updates.
We succeed in removing the original hierarchy from the device tree. But the
vio bus code is ignorant of this, and does not unbind or relinquish its
references. The leaf nodes, still reachable through sysfs, of course still
refer to the now-freed ibm,platform-facilities parent node, which makes
use-after-free possible:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 1706 at lib/refcount.c:25 refcount_warn_saturate+0x164/0x1f0
refcount_warn_saturate+0x160/0x1f0 (unreliable)
kobject_get+0xf0/0x100
of_node_get+0x30/0x50
of_get_parent+0x50/0xb0
of_fwnode_get_parent+0x54/0x90
fwnode_count_parents+0x50/0x150
fwnode_full_name_string+0x30/0x110
device_node_string+0x49c/0x790
vsnprintf+0x1c0/0x4c0
sprintf+0x44/0x60
devspec_show+0x34/0x50
dev_attr_show+0x40/0xa0
sysfs_kf_seq_show+0xbc/0x200
kernfs_seq_show+0x44/0x60
seq_read_iter+0x2a4/0x740
kernfs_fop_read_iter+0x254/0x2e0
new_sync_read+0x120/0x190
vfs_read+0x1d0/0x240
Moreover, the "new" replacement subtree is not correctly added to the
device tree, resulting in ibm,platform-facilities parent node without the
appropriate leaf nodes, and broken symlinks in the sysfs device hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
0 directories
$ cd /sys/devices/vio ; find . -xtype l -exec file {} +
./ibm,sym-encryption-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,sym-encryption-v1
./ibm,random-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,random-v1
./ibm,compression-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,compression-v1
This is because add_dt_node() -> dlpar_attach_node() attaches only the
parent node returned from configure-connector, ignoring any children. This
should be corrected for the general case, but fixing that won't help with
the stale OF node references, which is the more urgent problem.
One way to address that would be to make the drivers respond to node
removal notifications, so that node references can be dropped
appropriately. But this would likely force the drivers to disrupt active
clients for no useful purpose: equivalent nodes are immediately re-added.
And recall that the acceleration capabilities described by the nodes remain
available throughout the whole process.
The solution I believe to be robust for this situation is to convert
remove+add of a node with an unchanged phandle to an update of the node's
properties in the Linux device tree structure. That would involve changing
and adding a fair amount of code, and may take several iterations to land.
Until that can be realized we have a confirmed use-after-free and the
possibility of memory corruption. So add a limited workaround that
discriminates on the node type, ignoring adds and removes. This should be
amenable to backporting in the meantime.
Fixes: 410bccf978 ("powerpc/pseries: Partition migration in the kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020194703.2613093-1-nathanl@linux.ibm.com
Long time ago we had a config item called STRICT_MM_TYPECHECKS
to build the kernel with pte_t defined as a structure in order
to perform additional build checks or build it with pte_t
defined as a simple type in order to get simpler generated code.
Commit 670eea9241 ("powerpc/mm: Always use STRICT_MM_TYPECHECKS")
made the struct based definition the only one, considering that the
generated code was similar in both cases.
That's right on ppc64 because the ABI is such that the content of a
struct having a single simple type element is passed as register,
but on ppc32 such a structure is passed via the stack like any
structure.
Simple test function:
pte_t test(pte_t pte)
{
return pte;
}
Before this patch we get
c00108ec <test>:
c00108ec: 81 24 00 00 lwz r9,0(r4)
c00108f0: 91 23 00 00 stw r9,0(r3)
c00108f4: 4e 80 00 20 blr
So, for PPC32, restore the simple type behaviour we got before
commit 670eea9241, but instead of adding a config option to
activate type check, do it when __CHECKER__ is set so that type
checking is performed by 'sparse' and provides feedback like:
arch/powerpc/mm/pgtable.c:466:16: warning: incorrect type in return expression (different base types)
arch/powerpc/mm/pgtable.c:466:16: expected unsigned long
arch/powerpc/mm/pgtable.c:466:16: got struct pte_t [usertype] x
With this patch we now get
c0010890 <test>:
c0010890: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Define STRICT_MM_TYPECHECKS rather than repeating the condition]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c904599f33aaf6bb7ee2836a9ff8368509e0d78d.1631887042.git.christophe.leroy@csgroup.eu
CONFIG_STRICT_KERNEL_RWX should be set by default on every
architectures (See https://github.com/KSPP/linux/issues/4)
On PPC32 we have to find a compromise between performance and/or
memory wasting and selection of strict_kernel_rwx, because it implies
either smaller memory chunks or larger alignment between RO memory
and RW memory.
For instance the 8xx maps memory with 8M pages. So either the limit
between RO and RW must be 8M aligned or it falls back or 512k pages
which implies more pressure on the TLB.
book3s/32 maps memory with BATs as much as possible. BATS can have
any power-of-two size between 128k and 256M but we have only 4 to 8
BATs so the alignment must be good enough to allow efficient use of
the BATs and avoid falling back on standard page mapping which would
kill performance.
So let's go one step forward and make it the default but still allow
users to unset it when wanted.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/057c40164084bfc7d77c0b2ff78d95dbf6a2a21b.1632503622.git.christophe.leroy@csgroup.eu
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() and put_user() are granting userspace access and
are exclusively for userspace access.
Convert single step emulation functions to user_access_begin() and
friends and use unsafe_get_user() and unsafe_put_user().
When addressing kernel addresses, there is no need to open userspace
access. And for book3s/32 it is particularly important to no try and
open userspace access on kernel address, because that would break the
content of kernel space segment registers. No guard has been put
against that risk in order to avoid degrading performance.
copy_from_kernel_nofault() and copy_to_kernel_nofault() should
be used but they are out-of-line functions which would degrade
performance. Those two functions are making use of
__get_kernel_nofault() and __put_kernel_nofault() macros.
Those two macros are just wrappers behind __get_user_size_goto() and
__put_user_size_goto().
unsafe_get_user() and unsafe_put_user() are also wrappers of
__get_user_size_goto() and __put_user_size_goto(). Use them to
access kernel space. That allows refactoring userspace and
kernelspace access.
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Depends-on: 4fe5cda9f8 ("powerpc/uaccess: Implement user_read_access_begin and user_write_access_begin")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/22831c9d17f948680a12c5292e7627288b15f713.1631817805.git.christophe.leroy@csgroup.eu
dcbz instruction shouldn't be used on non-cached memory. Using
it on non-cached memory can result in alignment exception and
implies a heavy handling.
Instead of silentely emulating the instruction and resulting in high
performance degradation, warn whenever an alignment exception is
taken in kernel mode due to dcbz, so that the user is made aware that
dcbz instruction has been used unexpectedly by the kernel.
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2e3acfe63d289c6fba366e16973c9ab8369e8b75.1631803922.git.christophe.leroy@csgroup.eu
Add support for out-of-line static calls on PPC32. This change
improve performance of calls to global function pointers by
using direct calls instead of indirect calls.
The trampoline is initialy populated with a 'blr' or branch to target,
followed by an unreachable long jump sequence.
In order to cater with parallele execution, the trampoline needs to
be updated in a way that ensures it remains consistent at all time.
This means we can't use the traditional lis/addi to load r12 with
the target address, otherwise there would be a window during which
the first instruction contains the upper part of the new target
address while the second instruction still contains the lower part of
the old target address. To avoid that the target address is stored
just after the 'bctr' and loaded from there with a single instruction.
Then, depending on the target distance, arch_static_call_transform()
will either replace the first instruction by a direct 'bl <target>' or
'nop' in order to have the trampoline fall through the long jump
sequence.
For the special case of __static_call_return0(), to avoid the risk of
a far branch, a version of it is inlined at the end of the trampoline.
Performancewise the long jump sequence is probably not better than
the indirect calls set by GCC when we don't use static calls, but
such calls are unlikely to be required on powerpc32: With most
configurations the kernel size is far below 32 Mbytes so only
modules may happen to be too far. And even modules are likely to
be close enough as they are allocated below the kernel core and
as close as possible of the kernel text.
static_call selftest is running successfully with this change.
With this patch, __do_irq() has the following sequence to trace
irq entries:
c0004a00 <__SCT__tp_func_irq_entry>:
c0004a00: 48 00 00 e0 b c0004ae0 <__traceiter_irq_entry>
c0004a04: 3d 80 c0 00 lis r12,-16384
c0004a08: 81 8c 4a 1c lwz r12,18972(r12)
c0004a0c: 7d 89 03 a6 mtctr r12
c0004a10: 4e 80 04 20 bctr
c0004a14: 38 60 00 00 li r3,0
c0004a18: 4e 80 00 20 blr
c0004a1c: 00 00 00 00 .long 0x0
...
c0005654 <__do_irq>:
...
c0005664: 7c 7f 1b 78 mr r31,r3
...
c00056a0: 81 22 00 00 lwz r9,0(r2)
c00056a4: 39 29 00 01 addi r9,r9,1
c00056a8: 91 22 00 00 stw r9,0(r2)
c00056ac: 3d 20 c0 af lis r9,-16209
c00056b0: 81 29 74 cc lwz r9,29900(r9)
c00056b4: 2c 09 00 00 cmpwi r9,0
c00056b8: 41 82 00 10 beq c00056c8 <__do_irq+0x74>
c00056bc: 80 69 00 04 lwz r3,4(r9)
c00056c0: 7f e4 fb 78 mr r4,r31
c00056c4: 4b ff f3 3d bl c0004a00 <__SCT__tp_func_irq_entry>
Before this patch, __do_irq() was doing the following to trace irq
entries:
c0005700 <__do_irq>:
...
c0005710: 7c 7e 1b 78 mr r30,r3
...
c000574c: 93 e1 00 0c stw r31,12(r1)
c0005750: 81 22 00 00 lwz r9,0(r2)
c0005754: 39 29 00 01 addi r9,r9,1
c0005758: 91 22 00 00 stw r9,0(r2)
c000575c: 3d 20 c0 af lis r9,-16209
c0005760: 83 e9 f4 cc lwz r31,-2868(r9)
c0005764: 2c 1f 00 00 cmpwi r31,0
c0005768: 41 82 00 24 beq c000578c <__do_irq+0x8c>
c000576c: 81 3f 00 00 lwz r9,0(r31)
c0005770: 80 7f 00 04 lwz r3,4(r31)
c0005774: 7d 29 03 a6 mtctr r9
c0005778: 7f c4 f3 78 mr r4,r30
c000577c: 4e 80 04 21 bctrl
c0005780: 85 3f 00 0c lwzu r9,12(r31)
c0005784: 2c 09 00 00 cmpwi r9,0
c0005788: 40 82 ff e4 bne c000576c <__do_irq+0x6c>
Behind the fact of now using a direct 'bl' instead of a
'load/mtctr/bctr' sequence, we can also see that we get one less
register on the stack.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6ec2a7865ed6a5ec54ab46d026785bafe1d837ea.1630484892.git.christophe.leroy@csgroup.eu
ppc_md.iommu_save() is not set anymore by any platform after
commit c40785ad30 ("powerpc/dart: Use a cachable DART").
So iommu_save() has become a nop and can be removed.
ppc_md.show_percpuinfo() is not set anymore by any platform after
commit 4350147a81 ("[PATCH] ppc64: SMU based macs cpufreq support").
Last users of ppc_md.rtc_read_val() and ppc_md.rtc_write_val() were
removed by commit 0f03a43b8f ("[POWERPC] Remove todc code from
ARCH=powerpc")
Last user of kgdb_map_scc() was removed by commit 17ce452f7e ("kgdb,
powerpc: arch specific powerpc kgdb support").
ppc.machine_kexec_prepare() has not been used since
commit 8ee3e0d696 ("powerpc: Remove the main legacy iSerie platform
code"). This allows the removal of machine_kexec_prepare() and the
rename of default_machine_kexec_prepare() into machine_kexec_prepare()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
[mpe: Drop prototype for default_machine_kexec_prepare() as noted by dja]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24d4ca0ada683c9436a5f812a7aeb0a1362afa2b.1630398606.git.christophe.leroy@csgroup.eu
Commit d75d68cfef ("powerpc: Clean up obsolete code relating to
decrementer and timebase") made generic_suspend_enable_irqs() and
generic_suspend_disable_irqs() static.
Fold them into their only caller.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c3f9ec9950394ef939014f7934268e6ee30ca04f.1630398566.git.christophe.leroy@csgroup.eu
Commit e65e1fc2d2 ("[PATCH] syscall class hookup for all normal
targets") added generic support for AUDIT but that didn't include
support for bi-arch like powerpc.
Commit 4b58841149 ("audit: Add generic compat syscall support")
added generic support for bi-arch.
Convert powerpc to that bi-arch generic audit support.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b3951d1191d4183d92a07a6097566bde60d00a.1629812058.git.christophe.leroy@csgroup.eu
Instructions lmw/stmw are interesting for functions that are rarely
used and not in the cache, because only one instruction is to be
copied into the instruction cache instead of 19. However those
instruction are less performant than 19x raw lwz/stw as they require
synchronisation plus one additional cycle.
SAVE_NVGPRS / REST_NVGPRS are used in only a few places which are
mostly in interrupts entries/exits and in task switch so they are
likely already in the cache.
Using standard lwz improves null_syscall selftest by:
- 10 cycles on mpc832x.
- 2 cycles on mpc8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/316c543b8906712c108985c8463eec09c8db577b.1629732542.git.christophe.leroy@csgroup.eu
Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
(!ptr && !ptr->foo) strikes again. :)
The expression (!ptr && !ptr->foo) is bogus and in case ptr is NULL,
it leads to a NULL pointer dereference: ptr->foo.
Fix this by converting && to ||
This issue was detected with the help of Coccinelle, and audited and
fixed manually.
Fixes: 1a0d0d5ed5 ("powerpc/vas: Add platform specific user window operations")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015050345.GA1161918@embeddedor
Enable STRICT_KERNEL_RWX on fsl_booke.
For that, we need additional TLBCAMs dedicated to linear mapping,
based on the alignment of _sinittext.
By default, up to 768 Mbytes of memory are mapped.
It uses 3 TLBCAMs of size 256 Mbytes.
With a data alignment of 16, we need up to 9 TLBCAMs:
16/16/16/16/64/64/64/256/256
With a data alignment of 4, we need up to 12 TLBCAMs:
4/4/4/4/16/16/16/64/64/64/256/256
With a data alignment of 1, we need up to 15 TLBCAMs:
1/1/1/1/4/4/4/16/16/16/64/64/64/256/256
By default, set a 16 Mbytes alignment as a compromise between memory
usage and number of TLBCAMs. This can be adjusted manually when needed.
For the time being, it doens't work when the base is randomised.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/29f9e5d2bbbc83ae9ca879265426a6278bf4d5bb.1634292136.git.christophe.leroy@csgroup.eu
Reorganise TLBCAM allocation so that when STRICT_KERNEL_RWX is
enabled, TLBCAMs are allocated such that readonly memory uses
different TLBCAMs.
This results in an allocation looking like:
Memory CAM mapping: 4/4/4/1/1/1/1/16/16/16/64/64/64/256/256 Mb, residual: 256Mb
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ca169bc288261a0e0558712f979023c3a960ebb.1634292136.git.christophe.leroy@csgroup.eu
Avoid switching to AS1 when reloading TLBCAM after init for
STRICT_KERNEL_RWX.
When we setup AS1 we expect the entire accessible memory to be mapped
through one entry, this is not the case anymore at the end of init.
We are not changing the size of TLBCAMs, only flags, so no need to
switch to AS1.
So change loadcam_multi() to not switch to AS1 when the given
temporary tlb entry in 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9d517fbfbc940f56103c46b323f6eb8f4485571.1634292136.git.christophe.leroy@csgroup.eu
Don't force MAS3_SX and MAS3_UX at all time. Take into account the
exec flag.
While at it, fix a couple of closeby style problems (indent with space
and unnecessary parenthesis), it keeps more readability.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5467044e59f27f9fcf709b9661779e3ce5f784f6.1634292136.git.christophe.leroy@csgroup.eu
We have a myriad of CONFIG symbols around different variants
of BOOKEs, which would be worth tidying up one day.
But at least, make file names and CONFIG option match:
We have CONFIG_FSL_BOOKE and CONFIG_PPC_FSL_BOOK3E.
fsl_booke.c is selected by and only by CONFIG_PPC_FSL_BOOK3E.
So rename it fsl_book3e to reduce confusion.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5dc871db1f67739319bec11f049ca450da1c13a2.1634292136.git.christophe.leroy@csgroup.eu
fsl_booke and 44x are not able to map kernel linear memory with
pages, so they can't support DEBUG_PAGEALLOC and KFENCE, and
STRICT_KERNEL_RWX is also a problem for now.
Enable those only on book3s (both 32 and 64 except KFENCE), 8xx and 40x.
Fixes: 88df6e90fa ("[POWERPC] DEBUG_PAGEALLOC for 32-bit")
Fixes: 95902e6c88 ("powerpc/mm: Implement STRICT_KERNEL_RWX on PPC32")
Fixes: 90cbac0e99 ("powerpc: Enable KFENCE for PPC32")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1ad9fdd9b27da3fdfa16510bb542ed51fa6e134.1634292136.git.christophe.leroy@csgroup.eu
Fix following coccicheck warning:
./arch/powerpc/kexec/file_load_64.c:698:1-22: WARNING: Function
for_each_node_by_type should have of_node_put() before goto
Early exits from for_each_node_by_type should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211018015418.10182-1-wanjiabing@vivo.com
Fix following coccicheck warning:
./arch/powerpc/platforms/pseries/iommu.c:924:1-28: WARNING: Function
for_each_node_with_property should have of_node_put() before break
Early exits from for_each_node_with_property should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211014075624.16344-1-wanjiabing@vivo.com
The page_alloc.c code will call into __kernel_map_pages() when
DEBUG_PAGEALLOC is configured and enabled.
As the implementation assumes hash, this should crash spectacularly if
not for a bit of luck in __kernel_map_pages(). In this function
linear_map_hash_count is always zero, the for loop exits without doing
any damage.
There are no other platforms that determine if they support
debug_pagealloc at runtime. Instead of adding code to mm/page_alloc.c to
do that, this change turns the map/unmap into a noop when in radix
mode and prints a warning once.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Reformat if per Christophe's suggestion]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013213438.675095-1-joel@jms.id.au
Fix a bug exposed by a previous fix, where running guests with certain SMT topologies
could crash the host on Power8.
Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled.
Thanks to: Nathan Lynch, Srikar Dronamraju, Valentin Schneider.
-----BEGIN PGP SIGNATURE-----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=572c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug exposed by a previous fix, where running guests with
certain SMT topologies could crash the host on Power8.
- Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is
enabled.
Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider.
* tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/smp: do not decrement idle task preempt count in CPU offline
powerpc/idle: Don't corrupt back chain when going idle
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" [1] for these cases. The
older style of one-element or zero-length arrays should no longer be
used[2].
Also, make use of the struct_size() helper in kzalloc().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Replace open coded parsing of CPU nodes' 'reg' property with
of_get_cpu_hwid().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006164332.1981454-8-robh@kernel.org
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we
get:
BUG: scheduling while atomic: swapper/1/0/0x00000000
no locks held by swapper/1/0.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100
Call Trace:
dump_stack_lvl+0xac/0x108
__schedule_bug+0xac/0xe0
__schedule+0xcf8/0x10d0
schedule_idle+0x3c/0x70
do_idle+0x2d8/0x4a0
cpu_startup_entry+0x38/0x40
start_secondary+0x2ec/0x3a0
start_secondary_prolog+0x10/0x14
This is because powerpc's arch_cpu_idle_dead() decrements the idle task's
preempt count, for reasons explained in commit a7c2bb8279 ("powerpc:
Re-enable preemption before cpu_die()"), specifically "start_secondary()
expects a preempt_count() of 0."
However, since commit 2c669ef697 ("powerpc/preempt: Don't touch the idle
task's preempt_count during hotplug") and commit f1a0a376ca ("sched/core:
Initialize the idle task with preemption disabled"), that justification no
longer holds.
The idle task isn't supposed to re-enable preemption, so remove the
vestigial preempt_enable() from the CPU offline path.
Tested with pseries and powernv in qemu, and pseries on PowerVM.
Fixes: 2c669ef697 ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
In isa206_idle_insn_mayloss() we store various registers into the stack
red zone, which is allowed.
However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again,
to 0(r1), which corrupts the stack back chain.
We used to do the same in isa206_idle_insn_mayloss() itself, but we
fixed that in 73287caa92 ("powerpc64/idle: Fix SP offsets when saving
GPRs"), however we missed that the macro also corrupts the back chain.
Corrupting the back chain is bad for debuggability but doesn't
necessarily cause a bug.
However we recently changed the stack handling in some KVM code, and it
now relies on the stack back chain being valid when it returns. The
corruption causes that code to return with r1 pointing somewhere in
kernel data, at some point LR is restored from the stack and we branch
to NULL or somewhere else invalid.
Only affects Power8 hosts running KVM guests, with dynamic_mt_modes
enabled (which it is by default).
The fixes tag below points to the commit that changed the KVM stack
handling, exposing this bug. The actual corruption of the back chain has
always existed since 948cf67c47 ("powerpc: Add NAP mode support on
Power7 in HV mode").
Fixes: 9b4416c509 ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au
Fix the data source encodings to represent L2.1/L3.1(another core's
L2/L3 on the same node) accesses properly for power10 and older
plaforms.
Add new macros(LEVEL/REM) which can be used to add mem_lvl_num and remote
field data inside perf_mem_data_src structure.
Result in power9 system with patch changes:
localhost:~/linux/tools/perf # ./perf mem report | grep Remote
0.01% 1 252 Remote core, same node L3 or L3 hit [.] 0x0000000000002dd0 producer_consumer [.] 0x00007fff7f25eb90
anon HitM N/A No N/A 0 0
0.01% 1 220 Remote core, same node L3 or L3 hit [.] 0x0000000000002dd0 producer_consumer [.] 0x00007fff77776d90
anon HitM N/A No N/A 0 0
0.01% 1 220 Remote core, same node L3 or L3 hit [.] 0x0000000000002dd0 producer_consumer [.] 0x00007fff817d9410
anon HitM N/A No N/A 0 0
Fixes: 79e96f8f93 ("powerpc/perf: Export memory hierarchy info to user space")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006140654.298352-5-kjain@linux.ibm.com
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
There is no need to pull blk-cgroup.h and thus blkdev.h in here, so
break the include chain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a bug where guests on P9 with interrupts passed through could get stuck in
synchronize_irq().
Fix a bug in KVM on P8 where secondary threads entering a guest would write outside their
allocated stack.
Fix a bug in KVM on P8 where secondary threads could confuse the host offline code and
cause the guest or host to crash.
Thanks to: Cédric Le Goater
-----BEGIN PGP SIGNATURE-----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=fPMr
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where guests on P9 with interrupts passed through could get
stuck in synchronize_irq().
- Fix a bug in KVM on P8 where secondary threads entering a guest would
write outside their allocated stack.
- Fix a bug in KVM on P8 where secondary threads could confuse the host
offline code and cause the guest or host to crash.
Thanks to Cédric Le Goater.
* tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest
KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
We call idle_kvm_start_guest() from power7_offline() if the thread has
been requested to enter KVM. We pass it the SRR1 value that was returned
from power7_idle_insn() which tells us what sort of wakeup we're
processing.
Depending on the SRR1 value we pass in, the KVM code might enter the
guest, or it might return to us to do some host action if the wakeup
requires it.
If idle_kvm_start_guest() is able to handle the wakeup, and enter the
guest it is supposed to indicate that by returning a zero SRR1 value to
us.
That was the behaviour prior to commit 10d91611f4 ("powerpc/64s:
Reimplement book3s idle code in C"), however in that commit the
handling of SRR1 was reworked, and the zeroing behaviour was lost.
Returning from idle_kvm_start_guest() without zeroing the SRR1 value can
confuse the host offline code, causing the guest to crash and other
weirdness.
Fixes: 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015133929.832061-2-mpe@ellerman.id.au
In commit 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in
C") kvm_start_guest() became idle_kvm_start_guest(). The old code
allocated a stack frame on the emergency stack, but didn't use the
frame to store anything, and also didn't store anything in its caller's
frame.
idle_kvm_start_guest() on the other hand is written more like a normal C
function, it creates a frame on entry, and also stores CR/LR into its
callers frame (per the ABI). The problem is that there is no caller
frame on the emergency stack.
The emergency stack for a given CPU is allocated with:
paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE;
So emergency_sp actually points to the first address above the emergency
stack allocation for a given CPU, we must not store above it without
first decrementing it to create a frame. This is different to the
regular kernel stack, paca->kstack, which is initialised to point at an
initial frame that is ready to use.
idle_kvm_start_guest() stores the backchain, CR and LR all of which
write outside the allocation for the emergency stack. It then creates a
stack frame and saves the non-volatile registers. Unfortunately the
frame it creates is not large enough to fit the non-volatiles, and so
the saving of the non-volatile registers also writes outside the
emergency stack allocation.
The end result is that we corrupt whatever is at 0-24 bytes, and 112-248
bytes above the emergency stack allocation.
In practice this has gone unnoticed because the memory immediately above
the emergency stack happens to be used for other stack allocations,
either another CPUs mc_emergency_sp or an IRQ stack. See the order of
calls to irqstack_early_init() and emergency_stack_init().
The low addresses of another stack are the top of that stack, and so are
only used if that stack is under extreme pressue, which essentially
never happens in practice - and if it did there's a high likelyhood we'd
crash due to that stack overflowing.
Still, we shouldn't be corrupting someone else's stack, and it is purely
luck that we aren't corrupting something else.
To fix it we save CR/LR into the caller's frame using the existing r1 on
entry, we then create a SWITCH_FRAME_SIZE frame (which has space for
pt_regs) on the emergency stack with the backchain pointing to the
existing stack, and then finally we switch to the new frame on the
emergency stack.
Fixes: 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015133929.832061-1-mpe@ellerman.id.au
Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm]
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
.opd section contains function descriptors used to locate
functions in the kernel. If someone is able to modify a
function descriptor he will be able to run arbitrary
kernel function instead of another.
To avoid that, move .opd section inside read-only memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3cd40b682fb6f75bb40947b55ca0bac20cb3f995.1634136222.git.christophe.leroy@csgroup.eu
On power9 and earlier platforms, the default event used for cyles and
instructions is PM_CYC (0x0001e) and PM_INST_CMPL (0x00002)
respectively. These events use two programmable PMCs and by default will
count irrespective of the run latch state (idle state). But since they
use programmable PMCs, these events can lead to multiplexing with other
events, because there are only 4 programmable PMCs. Hence in power10,
performance monitoring unit (PMU) driver uses performance monitor
counter 5 (PMC5) and performance monitor counter6 (PMC6) for counting
instructions and cycles.
Currently on power10, the event used for cycles is PM_RUN_CYC (0x600F4)
and instructions uses PM_RUN_INST_CMPL (0x500fa). But counting of these
events in idle state is controlled by the CC56RUN bit setting in Monitor
Mode Control Register0 (MMCR0). If the CC56RUN bit is zero, PMC5/6 will
not count when CTRL[RUN] (run latch) is zero. This could lead to missing
some counts if a thread is in idle state during system wide profiling.
To fix it, set the CC56RUN bit in MMCR0 for power10, which makes PMC5
and PMC6 count instructions and cycles regardless of the run latch
state. Since this change make PMC5/6 count as PM_INST_CMPL/PM_CYC,
rename the event code 0x600f4 as PM_CYC instead of PM_RUN_CYC and event
code 0x500fa as PM_INST_CMPL instead of PM_RUN_INST_CMPL. The changes
are only for PMC5/6 event codes and will not affect the behaviour of
PM_RUN_CYC/PM_RUN_INST_CMPL if progammed in other PMC's.
Fixes: a64e697cef ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.cm>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Tweak change log wording for style and consistency]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007075121.28497-1-atrajeev@linux.vnet.ibm.com
We fix the following warnings when building kernel with W=1:
arch/powerpc/kernel/eeh.c:598: warning: Function parameter or member 'function' not described in 'eeh_pci_enable'
arch/powerpc/kernel/eeh.c:774: warning: Function parameter or member 'edev' not described in 'eeh_set_dev_freset'
arch/powerpc/kernel/eeh.c:774: warning: expecting prototype for eeh_set_pe_freset(). Prototype was for eeh_set_dev_freset() instead
arch/powerpc/kernel/eeh.c:814: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset_full'
arch/powerpc/kernel/eeh.c:944: warning: Function parameter or member 'ops' not described in 'eeh_init'
arch/powerpc/kernel/eeh.c:1451: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset'
arch/powerpc/kernel/eeh.c:1526: warning: Function parameter or member 'func' not described in 'eeh_pe_inject_err'
arch/powerpc/kernel/eeh.c:1526: warning: Excess function parameter 'function' described in 'eeh_pe_inject_err'
Signed-off-by: Kai Song <songkai01@inspur.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211009041630.4135-1-songkai01@inspur.com
CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is
used to compile support for other platforms such as Microwatt. There
is no need for OPAL calls on these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070356.99952-1-clg@kaod.org
When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.
On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.
Fix that by discarding disabled interrupts in get_irqchip_state().
Fixes: da15c03b04 ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org #v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: seeteena <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org
max_mapnr is used by virt_addr_valid() to check if a linear
address is valid.
It must only include lowmem PFNs, like other architectures.
Problem detected on a system with 1G mem (Only 768M are mapped), with
CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report
virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77d99037782ac4b3c3b0124fc4ae80ce7b760b05.1634035228.git.christophe.leroy@csgroup.eu
The HPTE B field is a 2-bit field with values 0b10 and 0b11 reserved.
This field is also taken from the HPTE and used when KVM executes
TLBIEs to set the B field of those instructions.
Disallow the guest setting B to a reserved value with H_ENTER by
rejecting it. This is the same approach already taken for rejecting
reserved (unsupported) LLP values. This prevents the guest from being
able to induce the host to execute TLBIE with reserved values, which
is not known to be a problem with current processors but in theory it
could prevent the TLBIE from working correctly in a future processor.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145749.1331331-1-npiggin@gmail.com
Replace pdev->driver->name by dev_driver_string() for the corresponding
struct device. This is a step toward removing pci_dev->driver.
Move the function nearer its only user and instead of the ?: operator use a
normal "if" which is more readable.
Link: https://lore.kernel.org/r/20211004125935.2300113-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Patch adds support to include Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers. Update the definition of PERF_REG_PMU_MASK_300/31 and
PERF_REG_EXTENDED_MAX to include these SPR's.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-4-atrajeev@linux.vnet.ibm.com
PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask
value for extended registers. Current definition of these mask values
uses hex constant and does not use registers by name, making it less
readable. Patch refactor the macro values by or'ing together the actual
register value constants. Also include PERF_REG_EXTENDED_MAX as
part of enum definition.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-2-atrajeev@linux.vnet.ibm.com
Fix a regression hit by the IPR SCSI driver, introduced by the recent addition of MSI
domains on pseries.
A big series including 8 BPF fixes, some with potential security impact and the rest
various code generation issues.
Fix our program check assembler entry path, which was accidentally jumping into a gas
macro and generating strange stack frames, which could confuse find_bug().
A couple of fixes, and related changes, to fix corner cases in our machine check handling.
Fix our DMA IOMMU ops, which were not always returning the optimal DMA mask, leading to
at least one device falling back to 32-bit DMA when it shouldn't.
A fix for KUAP handling on 32-bit Book3S.
Fix crashes seen when kdumping on some pseries systems.
Thanks to: Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric Le Goater,
Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem, Christoph Hellwig, Johan Almbladh, Stan
Johnson.
-----BEGIN PGP SIGNATURE-----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=q+1t
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bit of a big batch, partly because I didn't send any last week, and
also just because the BPF fixes happened to land this week.
Summary:
- Fix a regression hit by the IPR SCSI driver, introduced by the
recent addition of MSI domains on pseries.
- A big series including 8 BPF fixes, some with potential security
impact and the rest various code generation issues.
- Fix our program check assembler entry path, which was accidentally
jumping into a gas macro and generating strange stack frames, which
could confuse find_bug().
- A couple of fixes, and related changes, to fix corner cases in our
machine check handling.
- Fix our DMA IOMMU ops, which were not always returning the optimal
DMA mask, leading to at least one device falling back to 32-bit DMA
when it shouldn't.
- A fix for KUAP handling on 32-bit Book3S.
- Fix crashes seen when kdumping on some pseries systems.
Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
Christoph Hellwig, Johan Almbladh, Stan Johnson"
* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
powerpc/32s: Fix kuap_kernel_restore()
powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
powerpc/64: warn if local irqs are enabled in NMI or hardirq context
powerpc/traps: do not enable irqs in _exception
powerpc/64s: fix program check interrupt emergency stack path
powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
powerpc/bpf ppc32: Fix JMP32_JSET_K
powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
powerpc/security: Add a helper to query stf_barrier type
powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf: Fix BPF_MOD when imm == 1
powerpc/bpf: Validate branch ranges
powerpc/lib: Add helper to check if offset is within conditional branch range
powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
This comment likely refers to the obsolete DLPAR workflow where some
resource state transitions were driven more directly from user space
utilities, but it also seems to contradict itself: "Change isolate state to
Isolate [...]" is at odds with the preceding sentences, and it does not
relate at all to the code that follows.
Remove it to prevent confusion.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-5-nathanl@linux.ibm.com
The core DLPAR code supports two actions (add and remove) and three
subtypes of action:
* By DRC index: the action is attempted on a single specified resource.
This is the usual case for processors.
* By indexed count: the action is attempted on a range of resources
beginning at the specified index. This is implemented only by the memory
DLPAR code.
* By count: the lower layer (CPU or memory) is responsible for locating the
specified number of resources to which the action can be applied.
I cannot find any evidence of the "by count" subtype being used by drmgr or
qemu for processors. And when I try to exercise this code, the add case
does not work:
$ ppc64_cpu --smt ; nproc
SMT=8
24
$ printf "cpu remove count 2" > /sys/kernel/dlpar
$ nproc
8
$ printf "cpu add count 2" > /sys/kernel/dlpar
-bash: printf: write error: Invalid argument
$ dmesg | tail -2
pseries-hotplug-cpu: Failed to find enough CPUs (1 of 2) to add
dlpar: Could not handle DLPAR request "cpu add count 2"
$ nproc
8
$ drmgr -c cpu -a -q 2 # this uses the by-index method
Validating CPU DLPAR capability...yes.
CPU 1
CPU 17
$ nproc
24
This is because find_drc_info_cpus_to_add() does not increment drc_index
appropriately during its search.
This is not hard to fix. But the _by_count() functions also have the
property that they attempt to roll back all prior operations if the entire
request cannot be satisfied, even though the rollback itself can encounter
errors. It's not possible to provide transaction-like behavior at this
level, and it's undesirable to have code that can only pretend to do that.
Any users of these functions cannot know what the state of the system is in
the error case. And the error paths are, to my knowledge, impossible to
test without adding custom error injection code.
Summary:
* This code has not worked reliably since its introduction.
* There is no evidence that it is used.
* It contains questionable rollback behaviors in error paths which are
difficult to test.
So let's remove it.
Fixes: ac71380071 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9 ("powerpc/pseries: Add CPU dlpar add functionality")
Fixes: b015f6bc95 ("powerpc/pseries: Add cpu DLPAR support for drc-info property")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-4-nathanl@linux.ibm.com
If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU
that isn't marked hotpluggable, we can emit a warning and return an
appropriate error instead of crashing.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-3-nathanl@linux.ibm.com
On pseries, cache nodes in the device tree can be added and removed by the
CPU DLPAR code as well as the partition migration (mobility) code. PowerVM
partitions in dedicated processor mode typically have L2 and L3 cache
nodes.
The CPU DLPAR code has the following shortcomings:
* Cache nodes returned as siblings of a new CPU node by
ibm,configure-connector are silently discarded; only the CPU node is
added to the device tree.
* Cache nodes which become unreferenced in the processor removal path are
not removed from the device tree. This can lead to duplicate nodes when
the post-migration device tree update code replaces cache nodes.
This is long-standing behavior. Presumably it has gone mostly unnoticed
because the two bugs have the property of obscuring each other in common
simple scenarios (e.g. remove a CPU and add it back). Likely you'd notice
only if you cared to inspect the device tree or the sysfs cacheinfo
information.
Booted with two processors:
$ pwd
/sys/firmware/devicetree/base/cpus
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@8/
$ lsprop */l2-cache
l2-cache@2010/l2-cache
00003110 (12560)
l2-cache@2011/l2-cache
00003111 (12561)
PowerPC,POWER9@0/l2-cache
00002010 (8208)
PowerPC,POWER9@8/l2-cache
00002011 (8209)
$ ls /sys/devices/system/cpu/cpu0/cache/
index0 index1 index2 index3
After DLPAR-adding PowerPC,POWER9@10, we see that its associated cache
nodes are absent, its threads' L2+L3 cacheinfo is unpopulated, and it is
missing a cache level in its sched domain hierarchy:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@10/
PowerPC,POWER9@8/
$ lsprop PowerPC\,POWER9@10/l2-cache
PowerPC,POWER9@10/l2-cache
00002012 (8210)
$ ls /sys/devices/system/cpu/cpu16/cache/
index0 index1
$ grep . /sys/kernel/debug/sched/domains/cpu{0,8,16}/domain*/name
/sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu8/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu8/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu8/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu16/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu16/domain1/name:DIE
When removing PowerPC,POWER9@8, we see that its cache nodes are left
behind:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
When DLPAR is combined with VM migration, we can get duplicate nodes. E.g.
removing one processor, then migrating, adding a processor, and then
migrating again can result in warnings from the OF core during
post-migration device tree updates:
Duplicate name in cpus, renamed to "l2-cache@2011#1"
Duplicate name in cpus, renamed to "l3-cache@3111#1"
and nodes with duplicated phandles in the tree, making lookup behavior
unpredictable:
$ lsprop l[23]-cache@*/ibm,phandle
l2-cache@2010/ibm,phandle
00002010 (8208)
l2-cache@2011#1/ibm,phandle
00002011 (8209)
l2-cache@2011/ibm,phandle
00002011 (8209)
l3-cache@3110/ibm,phandle
00003110 (12560)
l3-cache@3111#1/ibm,phandle
00003111 (12561)
l3-cache@3111/ibm,phandle
00003111 (12561)
Address these issues by:
* Correctly processing siblings of the node returned from
dlpar_configure_connector().
* Removing cache nodes in the CPU remove path when it can be determined
that they are not associated with other CPUs or caches.
Use the of_changeset API in both cases, which allows us to keep the error
handling in this code from becoming more complex while ensuring that the
device tree cannot become inconsistent.
Fixes: ac71380071 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9 ("powerpc/pseries: Add CPU dlpar add functionality")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-2-nathanl@linux.ibm.com
vcpu_is_preempted() can be used outside of preempt-disabled critical
sections, yielding warnings such as:
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/185
caller is rwsem_spin_on_owner+0x1cc/0x2d0
CPU: 1 PID: 185 Comm: systemd-udevd Not tainted 5.15.0-rc2+ #33
Call Trace:
[c000000012907ac0] [c000000000aa30a8] dump_stack_lvl+0xac/0x108 (unreliable)
[c000000012907b00] [c000000001371f70] check_preemption_disabled+0x150/0x160
[c000000012907b90] [c0000000001e0e8c] rwsem_spin_on_owner+0x1cc/0x2d0
[c000000012907be0] [c0000000001e1408] rwsem_down_write_slowpath+0x478/0x9a0
[c000000012907ca0] [c000000000576cf4] filename_create+0x94/0x1e0
[c000000012907d10] [c00000000057ac08] do_symlinkat+0x68/0x1a0
[c000000012907d70] [c00000000057ae18] sys_symlink+0x58/0x70
[c000000012907da0] [c00000000002e448] system_call_exception+0x198/0x3c0
[c000000012907e10] [c00000000000c54c] system_call_common+0xec/0x250
The result of vcpu_is_preempted() is always used speculatively, and the
function does not access per-cpu resources in a (Linux) preempt-unsafe way.
Use raw_smp_processor_id() to avoid such warnings, adding explanatory
comments.
Fixes: ca3f969dcb ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-3-nathanl@linux.ibm.com
Add comments more clearly documenting that this function determines whether
hypervisor-level preemption of the VM has occurred.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-2-nathanl@linux.ibm.com
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.
Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.
Fixes: 107c55005f ("powerpc/pseries: Add KVM guest doorbell restrictions")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928124550.132020-1-nathanl@linux.ibm.com
UPD_CONSTR was previously a preprocessor define for an old GCC 4.9
inline asm bug with m<> constraints.
Fixes: 6563139d90 ("powerpc: remove GCC version check for UPD_CONSTR")
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210914161712.2463458-1-ndesaulniers@google.com
Commit 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6ba9 ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h
Fixes: 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no previous prototype' error")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu
On powerpc, pci_dev_is_added() is called as part of SR-IOV fixups
that are done under pcibios_add_device() which in turn is only called in
pci_device_add() whih is called when a PCI device is scanned.
pci_dev_assign_added() is called in pci_bus_add_device() which is only
called after scanning the device. Thus pci_dev_is_added() is always
false and can be dropped.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log slightly to reflect Oliver's comments]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210910141940.2598035-2-schnelle@linux.ibm.com
commit 6d7f58b04d ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
removed of_show_percpuinfo but didn't remove the prototype.
Remove it.
Fixes: 6d7f58b04d ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210903063246.70691-1-dja@axtens.net
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-2-nixiaoming@huawei.com
The upcoming PAPR spec adds a 2M page size, bit 23 right after 16G page
size in the "ibm,query-pe-dma-window" call.
This adds support for the new page size. Since the new page size is out
of sorted order, this changes the loop to not assume that shift[] is
sorted.
This has now been tested and is known to work on a pre-release version
of phyp.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006044735.1114669-1-aik@ozlabs.ru
On pseries LPAR when an empty slot is assigned to partition OR in single
LPAR mode, kdump kernel crashes during issuing PHB reset.
In the kdump scenario, we traverse all PHBs and issue reset using the
pe_config_addr of the first child device present under each PHB. However
the code assumes that none of the PHB slots can be empty and uses
list_first_entry() to get the first child device under the PHB. Since
list_first_entry() expects the list to be non-empty, it returns an
invalid pci_dn entry and ends up accessing NULL phb pointer under
pci_dn->phb causing kdump kernel crash.
This patch fixes the below kdump kernel crash by skipping empty slots:
audit: initializing netlink subsys (disabled)
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
pstore: Registered nvram as persistent store backend
Issue PHB reset ...
audit: type=2000 audit(1631267818.000:1): state=initialized audit_enabled=0 res=1
BUG: Kernel NULL pointer dereference on read at 0x00000268
Faulting instruction address: 0xc000000008101fb0
Oops: Kernel access of bad area, sig: 7 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/7 Not tainted 5.14.0 #1
NIP: c000000008101fb0 LR: c000000009284ccc CTR: c000000008029d70
REGS: c00000001161b840 TRAP: 0300 Not tainted (5.14.0)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000224 XER: 20040002
CFAR: c000000008101f0c DAR: 0000000000000268 DSISR: 00080000 IRQMASK: 0
...
NIP pseries_eeh_get_pe_config_addr+0x100/0x1b0
LR __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
Call Trace:
0xc00000001161bb80 (unreliable)
__machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
do_one_initcall+0x60/0x2d0
kernel_init_freeable+0x350/0x3f8
kernel_init+0x3c/0x17c
ret_from_kernel_thread+0x5c/0x64
Fixes: 5a090f7c36 ("powerpc/pseries: PCIE PHB reset")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
[mpe: Tweak wording and trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/163215558252.413351.8600189949820258982.stgit@jupiter
At interrupt exit, kuap_kernel_restore() calls kuap_unlock() with the
value contained in regs->kuap. However, when regs->kuap contains
0xffffffff it means that KUAP was not unlocked so calling kuap_unlock()
is unrelevant and results in jeopardising the contents of kernel space
segment registers.
So check that regs->kuap doesn't contain KUAP_NONE before calling
kuap_unlock(). In the meantime it also means that if KUAP has not
been correcly locked back at interrupt exit, it must be locked
before continuing. This is done by checking the content of
current->thread.kuap which was returned by kuap_get_and_assert_locked()
Fixes: 16132529ce ("powerpc/32s: Rework Kernel Userspace Access Protection")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d0c4d0f050a637052287c09ba521bad960a2790.1631715131.git.christophe.leroy@csgroup.eu
The IPR drivers tests for MSI support at probe time with MSI vector 0
and when done, frees the IRQ with free_irq(). This test was introduced
by 95fecd9039 ("ipr: add test for MSI interrupt support") as an
improvement of commit 5a9ef25b14 ("[SCSI] ipr: add MSI support")
because a boot failure was reported on a Bimini PowerPC system:
https://lore.kernel.org/r/1242926159.3007.5.camel@localhost.localdomain
It was finally decided to remove MSI support on Bimini systems in
6eb0ac0389 ("powerpc/maple: Add a quirk to disable MSI for IPR on
Bimini").
Linux 5.15-rc1 added MSI domain support to the pseries machine and
when free_irq is called() in the driver, msi_domain_deactivate() also
is. This resets the MSI table entry of the associate vector by calling
__pci_write_msi_msg() with an empty message and breaks any further
activation of the same vector. In the case of the IPR driver, it
breaks the initialization sequence of the IOA.
Introduce an empty irq_write_msi_msg() handler in the MSI domain of
the pseries machine to avoid clearing the MSI vector entry. Updating
the entry is not strictly necessary since it is initialized by the
underlying hypervisor, PowerVM or QEMU/KVM.
Fixes: a5f3d2c17b ("powerpc/pseries/pci: Add MSI domains")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
[mpe: Tweak comment wording and formatting slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210930102535.1047230-1-clg@kaod.org
The machine check handler is not considered NMI on 64s. The early
handler is the true NMI handler, and then it schedules the
machine_check_exception handler to run when interrupts are enabled.
This works fine except the case of an unrecoverable MCE, where the true
NMI is taken when MSR[RI] is clear, it can not recover, so it calls
machine_check_exception directly so something might be done about it.
Calling an async handler from NMI context can result in irq state and
other things getting corrupted. This can also trigger the BUG at
arch/powerpc/include/asm/interrupt.h:168
BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE));
Fix this by making an _async version of the handler which is called
in the normal case, and a NMI version that is called for unrecoverable
interrupts.
Fixes: 2b43dd7653 ("powerpc/64: enable MSR[EE] in irq replay pt_regs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-6-npiggin@gmail.com
If a NMI hits early in an interrupt handler before the irq soft-mask
state is reconciled, that can cause a false-positive BUG with a
CONFIG_PPC_IRQ_SOFT_MASK_DEBUG assertion.
Remove that assertion and instead check the case that if regs->msr has
EE clear, then regs->softe should be marked as disabled so the irq state
looks correct to NMI handlers, the same as how it's fixed up in the
case it was implicit soft-masked.
This doesn't fix a known problem -- the change that was fixed by commit
4ec5feec1a ("powerpc/64s: Make NMI record implicitly soft-masked code
as irqs disabled") was the addition of a warning in the soft-nmi
watchdog interrupt which can never actually fire when MSR[EE]=0. However
it may be important if NMI handlers grow more code, and it's less
surprising to anything using 'regs' - (I tripped over this when working
in the area).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-5-npiggin@gmail.com
This can help catch bugs such as the one fixed by the previous change
to prevent _exception() from enabling irqs.
ppc32 could have a similar warning but it has no good config option to
debug this stuff (the test may be overkill to add for production
kernels).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-4-npiggin@gmail.com
_exception can be called by machine check handlers when the MCE hits
user code (e.g., pseries and powernv). This will enable local irqs
because, which is a dicey thing to do in NMI or hard irq context.
This seemed to worked out okay because a userspace MCE can basically be
treated like a synchronous interrupt (after async / imprecise MCEs are
filtered out). Since NMI and hard irq handlers have started growing
nmi_enter / irq_enter, and more irq state sanity checks, this has
started to cause problems (or at least trigger warnings).
The Fixes tag to the commit which introduced this rather than try to
work out exactly which commit was the first that could possibly cause a
problem because that may be difficult to prove.
Fixes: 9f2f79e3a3 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-3-npiggin@gmail.com
Emit similar instruction sequences to commit a048a07d7f
("powerpc/64s: Add support for a store forwarding barrier at kernel
entry/exit") when encountering BPF_NOSPEC.
Mitigations are enabled depending on what the firmware advertises. In
particular, we do not gate these mitigations based on current settings,
just like in x86. Due to this, we don't need to take any action if
mitigations are enabled or disabled at runtime.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
We aren't handling subtraction involving an immediate value of
0x80000000 properly. Fix the same.
Fixes: 156d0e290e ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fold in fix from Naveen to use imm <= 32768]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fc4b1276eb10761fd7ce0814c8dd089da2815251.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Only ignore the operation if dividing by 1.
Fixes: 156d0e290e ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Add checks to ensure that we never emit branch instructions with
truncated branch offsets.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
Introduce a powerpc version of the cc_platform_has() function. This will
be used to replace the powerpc mem_encrypt_active() implementation, so
the implementation will initially only support the CC_ATTR_MEM_ENCRYPT
attribute.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lkml.kernel.org/r/20210928191009.32551-5-bp@alien8.de
Property phy-connection-type contains invalid value "sgmii-2500" per scheme
defined in file ethernet-controller.yaml.
Correct phy-connection-type value should be "2500base-x".
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 84e0f1c138 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)")
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace audit syscall class magic numbers with macros.
This required putting the macros into new header file
include/linux/audit_arch.h since the syscall macros were
included for both 64 bit and 32 bit in any compat code, causing
redefinition warnings.
Link: https://lore.kernel.org/r/2300b1083a32aade7ae7efb95826e8f3f260b1df.1621363275.git.rgb@redhat.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
[PM: renamed header to audit_arch.h after consulting with Richard]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to access
kretprobe_trampoline directly.
Make it harder to refer by renaming it to __kretprobe_trampoline().
Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The __kretprobe_trampoline_handler() callback, called from low level
arch kprobes methods, has the 'trampoline_address' parameter, which is
entirely superfluous as it basically just replicates:
dereference_kernel_function_descriptor(kretprobe_trampoline)
In fact we had bugs in arch code where it wasn't replicated correctly.
So remove this superfluous parameter and use kretprobe_trampoline_addr()
instead.
Link: https://lkml.kernel.org/r/163163044546.489837.13505751885476015002.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
~15 years ago kprobes grew the 'arch_deref_entry_point()' __weak function:
3d7e33825d: ("jprobes: make jprobes a little safer for users")
But this is just open-coded dereference_symbol_descriptor() in essence, and
its obscure nature was causing bugs.
Just use the real thing and remove arch_deref_entry_point().
Link: https://lkml.kernel.org/r/163163043630.489837.7924988885652708696.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since get_optimized_kprobe() is only used inside kprobes,
it doesn't need to use 'unsigned long' type for 'addr' parameter.
Make it use 'kprobe_opcode_t *' for the 'addr' parameter and
subsequent call of arch_within_optimized_kprobe() also should use
'kprobe_opcode_t *'.
Note that MAX_OPTIMIZED_LENGTH and RELATIVEJUMP_SIZE are defined
by byte-size, but the size of 'kprobe_opcode_t' depends on the
architecture. Therefore, we must be careful when calculating
addresses using those macros.
Link: https://lkml.kernel.org/r/163163040680.489837.12133032364499833736.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of relying on awful hacks to obtain the offset of the cpu field
in struct task_struct, move it back into struct thread_info, which does
not create the same level of circular dependency hell when trying to
include the header file that defines it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
THREAD_INFO_IN_TASK moved the CPU field out of thread_info, but this
causes some issues on architectures that define raw_smp_processor_id()
in terms of this field, due to the fact that #include'ing linux/sched.h
to get at struct task_struct is problematic in terms of circular
dependencies.
Given that thread_info and task_struct are the same data structure
anyway when THREAD_INFO_IN_TASK=y, let's move it back so that having
access to the type definition of struct thread_info is sufficient to
reference the CPU number of the current task.
Note that this requires THREAD_INFO_IN_TASK's definition of the
task_thread_info() helper to be updated, as task_cpu() takes a
pointer-to-const, whereas task_thread_info() (which is used to generate
lvalues as well), needs a non-const pointer. So make it a macro instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
The CPU field will be moved back into thread_info even when
THREAD_INFO_IN_TASK is enabled, so add it back to powerpc's definition
of struct thread_info.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
KVM_MAX_VCPU_ID is not specifying the highest allowed vcpu-id, but the
number of allowed vcpu-ids. This has already led to confusion, so
rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDS to make its semantics more
clear
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210913135745.13944-3-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to dma-api.rst, the dma_get_required_mask() helper should return
"the mask that the platform requires to operate efficiently". Which in
the case of PPC64 means the bypass mask and not a mask from an IOMMU table
which is shorter and slower to use due to map/unmap operations (especially
expensive on "pseries").
However the existing implementation ignores the possibility of bypassing
and returns the IOMMU table mask on the pseries platform which makes some
drivers (mpt3sas is one example) choose 32bit DMA even though bypass is
supported. The powernv platform sort of handles it by having a bigger
default window with a mask >=40 but it only works as drivers choose
63/64bit if the required mask is >32 which is rather pointless.
This reintroduces the bypass capability check to let drivers make
a better choice of the DMA mask.
Fixes: f1565c24b5 ("powerpc: use the generic dma_ops_bypass mode")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210930034454.95794-1-aik@ozlabs.ru
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now
that the two function are always called back-to-back by architectures
that have rseq. The rseq helper is stubbed out for architectures that
don't support rseq, i.e. this is a nop across the board.
Note, tracehook_notify_resume() is horribly named and arguably does not
belong in tracehook.h as literally every line of code in it has nothing
to do with tracing. But, that's been true since commit a42c6ded82
("move key_repace_session_keyring() into tracehook_notify_resume()")
first usurped tracehook_notify_resume() back in 2012. Punt cleaning that
mess up to future patches.
No functional change intended.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The general convention for pcibios_* hooks is that they're named after the
corresponding pci_* function they provide a hook for. The exception is
pcibios_add_device() which provides a hook for pci_device_add().
Rename pcibios_add_device() to pcibios_device_add() so it matches
pci_device_add().
Also, remove the export of the microblaze version. The only caller must be
compiled as a built-in so there's no reason for the export.
Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction
is active, on Power9 or later.
Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode.
Fix crashes when handling machine checks in LPARs using the Hash MMU.
Partly revert a recent change to our XICS interrupt controller code, which broke the
recently added Microwatt support.
Thanks to: Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=yC9U
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes when scv (System Call Vectored) is used to make a syscall
when a transaction is active, on Power9 or later.
- Fix bad interactions between rfscv (Return-from scv) and Power9
fake-suspend mode.
- Fix crashes when handling machine checks in LPARs using the Hash MMU.
- Partly revert a recent change to our XICS interrupt controller code,
which broke the recently added Microwatt support.
Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.
* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xics: Set the IRQ chip data for the ICS native backend
powerpc/mce: Fix access error in mce handler
KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
powerpc/64s: system call rfscv workaround for TM bugs
selftests/powerpc: Add scv versions of the basic TM syscall tests
powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
The ICS native driver relies on the IRQ chip data to find the struct
'ics_native' describing the ICS controller but it was removed by commit
248af248a8 ("powerpc/xics: Rename the map handler in a check handler").
Revert this change to fix the Microwatt SoC platform.
Fixes: 248af248a8 ("powerpc/xics: Rename the map handler in a check handler")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210913134056.3761960-1-clg@kaod.org
Stephen reported that the build was broken since commit
6d2ef226f2 ("compiler_attributes.h: drop __has_attribute() support for
gcc4"), with errors such as:
include/linux/compiler_attributes.h:296:5: warning: "__has_attribute" is not defined, evaluates to 0 [-Wundef]
296 | #if __has_attribute(__warning__)
| ^~~~~~~~~~~~~~~
make[2]: *** [arch/powerpc/boot/Makefile:225: arch/powerpc/boot/crt0.o] Error 1
But we expect __has_attribute() to always be defined now that we've
stopped using GCC 4.
Linus debugged it to the point of reading the GCC sources, and noticing
that the problem is that __has_attribute() is not defined when
preprocessing assembly files, which is what we're doing here.
Our assembly files don't include, or need, compiler_attributes.h, but
they are getting it unconditionally from the -include in BOOT_CFLAGS,
which is then added in its entirety to BOOT_AFLAGS.
That -include was added in commit 77433830ed ("powerpc: boot: include
compiler_attributes.h") so that we'd have "fallthrough" and other
attributes defined for the C files in arch/powerpc/boot. But it's not
needed for assembly files.
The minimal fix is to move the addition to BOOT_CFLAGS of -include
compiler_attributes.h until after we've copied BOOT_CFLAGS into
BOOT_AFLAGS. That avoids including compiler_attributes.h for asm files,
but makes no other change to BOOT_CFLAGS or BOOT_AFLAGS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge patch series from Nick Desaulniers to update the minimum gcc
version to 5.1.
This is some of the left-overs from the merge window that I didn't want
to deal with yesterday, so it comes in after -rc1 but was sent before.
Gcc-4.9 support has been an annoyance for some time, and with -Werror I
had the choice of applying a fairly big patch from Kees Cook to remove a
fair number of initializer warnings (still leaving some), or this patch
series from Nick that just removes the source of the problem.
The initializer cleanups might still be worth it regardless, but
honestly, I preferred just tackling the problem with gcc-4.9 head-on.
We've been more aggressiuve about no longer having to care about
compilers that were released a long time ago, and I think it's been a
good thing.
I added a couple of patches on top to sort out a few left-overs now that
we no longer support gcc-4.x.
As noted by Arnd, as a result of this minimum compiler version upgrade
we can probably change our use of '--std=gnu89' to '--std=gnu11', and
finally start using local loop declarations etc. But this series does
_not_ yet do that.
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/lkml/CAK7LNASs6dvU6D3jL2GG3jW58fXfaj6VNOe55NJnTB8UPuk2pA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
* emailed patches from Nick Desaulniers <ndesaulniers@google.com>:
Drop some straggling mentions of gcc-4.9 as being stale
compiler_attributes.h: drop __has_attribute() support for gcc4
vmlinux.lds.h: remove old check for GCC 4.9
compiler-gcc.h: drop checks for older GCC versions
Makefile: drop GCC < 5 -fno-var-tracking-assignments workaround
arm64: remove GCC version check for ARCH_SUPPORTS_INT128
powerpc: remove GCC version check for UPD_CONSTR
riscv: remove Kconfig check for GCC version for ARCH_RV64I
Kconfig.debug: drop GCC 5+ version check for DWARF5
mm/ksm: remove old GCC 4.9+ check
compiler.h: drop fallback overflow checkers
Documentation: raise minimum supported version of GCC to 5.1
Now that GCC 5.1 is the minimum supported version, we can drop this
workaround for older versions of GCC. This adversely affected clang,
too.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We queue an irq work for deferred processing of mce event in realmode
mce handler, where translation is disabled. Queuing of the work may
result in accessing memory outside RMO region, such access needs the
translation to be enabled for an LPAR running with hash mmu else the
kernel crashes.
After enabling translation in mce_handle_error() we used to leave it
enabled to avoid crashing here, but now with the commit
74c3354bc1 ("powerpc/pseries/mce: restore msr before returning from
handler") we are restoring the MSR to disable translation.
Hence to fix this enable the translation before queuing the work.
Without this change following trace is seen on injecting SLB multihit in
an LPAR running with hash mmu.
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 5 PID: 1883 Comm: insmod Tainted: G OE 5.14.0-mce+ #137
NIP: c000000000735d60 LR: c000000000318640 CTR: 0000000000000000
REGS: c00000001ebff9a0 TRAP: 0300 Tainted: G OE (5.14.0-mce+)
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008228 XER: 00000001
CFAR: c00000000031863c DAR: c00000027fa8fe08 DSISR: 40000000 IRQMASK: 0
...
NIP llist_add_batch+0x0/0x40
LR __irq_work_queue_local+0x70/0xc0
Call Trace:
0xc00000001ebffc0c (unreliable)
irq_work_queue+0x40/0x70
machine_check_queue_event+0xbc/0xd0
machine_check_early_common+0x16c/0x1f4
Fixes: 74c3354bc1 ("powerpc/pseries/mce: restore msr before returning from handler")
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
[mpe: Fix comment formatting, trim oops in change log for readability]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210909064330.312432-1-ganeshgr@linux.ibm.com
POWER9 DD2.2 and 2.3 hardware implements a "fake-suspend" mode where
certain TM instructions executed in HV=0 mode cause softpatch interrupts
so the hypervisor can emulate them and prevent problematic processor
conditions. In this fake-suspend mode, the treclaim. instruction does
not modify registers.
Unfortunately the rfscv instruction executed by the guest do not
generate softpatch interrupts, which can cause the hypervisor to lose
track of the fake-suspend mode, and it can execute this treclaim. while
not in fake-suspend mode. This modifies GPRs and crashes the hypervisor.
It's not trivial to disable scv in the guest with HFSCR now, because
they assume a POWER9 has scv available. So this fix saves and restores
checkpointed registers across the treclaim.
Fixes: 7854f7545b ("KVM: PPC: Book3S: Rework TM save/restore code and make it C-callable")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210908101718.118522-2-npiggin@gmail.com
The rfscv instruction does not work correctly with the fake-suspend mode
in POWER9, which can end up with the hypervisor restoring an incorrect
checkpoint.
Work around this by setting the _TIF_RESTOREALL flag if a system call
returns to a transaction active state, causing rfid to be used instead
of rfscv to return, which will do the right thing. The contents of the
registers are irrelevant because they will be overwritten in this case
anyway.
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Reported-by: Eirik Fuller <efuller@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210908101718.118522-1-npiggin@gmail.com
If a system call is made with a transaction active, the kernel
immediately aborts it and returns. scv system calls disable irqs even
earlier in their interrupt handler, and tabort_syscall does not fix this
up.
This can result in irq soft-mask state being messed up on the next
kernel entry, and crashing at BUG_ON(arch_irq_disabled_regs(regs)) in
the kernel exit handlers, or possibly worse.
This can't easily be fixed in asm because at this point an async irq may
have hit, which is soft-masked and marked pending. The pending interrupt
has to be replayed before returning to userspace. The fix is to move the
tabort_syscall code to C in the main syscall handler, and just skip the
system call but otherwise return as usual, which will take care of the
pending irqs. This also does a bunch of other things including possible
signal delivery to the process, but the doomed transaction should still
be aborted when it is eventually returned to.
The sc system call path is changed to use the new C function as well to
reduce code and path differences. This slows down how quickly system
calls are aborted when called while a transaction is active, which could
potentially impact TM performance. But making any system call is already
bad for performance, and TM is on the way out, so go with simpler over
faster.
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Reported-by: Eirik Fuller <efuller@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use #ifdef rather than IS_ENABLED() to fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210903125707.1601269-1-npiggin@gmail.com
All users of compat_alloc_user_space() and copy_in_user() have been
removed from the kernel, only a few functions in sparc remain that can be
changed to calling arch_copy_in_user() instead.
Link: https://lkml.kernel.org/r/20210727144859.4150043-7-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are all handled correctly when calling the native system call entry
point, so remove the special cases.
Link: https://lkml.kernel.org/r/20210727144859.4150043-6-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
There are some empty trap_init() definitions in different ARCHs, Introduce
a new weak trap_init() function to clean them up.
Link: https://lkml.kernel.org/r/20210812123602.76356-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm32]
Acked-by: Vineet Gupta [arc]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <palmerdabbelt@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only a single user remaining. We can simply lookup the nid only
used for node offlining purposes when walking our memory blocks. We don't
expect to remove multi-nid ranges; and if we'd ever do, we most probably
don't care about removing multi-nid ranges that actually result in empty
nodes.
If ever required, we can detect the "multi-nid" scenario and simply try
offlining all online nodes.
Link: https://lkml.kernel.org/r/20210712124052.26491-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@ionos.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=LuHM
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
- Simplifying the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig now can start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- Introduction of "event probes" that attach to other events and
can retrieve data from pointers of fields, or record fields
as different types (a pointer to a string as a string instead
of just a hex number)
- Various fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYTJDixQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnPLAP9XviWrZD27uFj6LU/Vp2umbq8la1aC
oW8o9itUGpLoHQD+OtsMpQXsWrxoNw/JD1OWCH4J0YN+TnZAUUG2E9e0twA=
=OZXG
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmEyHTYTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDo3D/9aXMVP2wsEMNB0XhTiJ1UUdi311Uq9
PvkAaGZH14ZqZLVigeiD3gt6YzTH0cEuGj6qgwsJrPDjF8FESnMbBsprMLr5/qE1
itWRGMAMCFaeTcB9ogYVJkzwg6RN2ZgIqoq4NVswNSXoAQGWb+1bvXq3RnXXNuGR
TQmLL02poNC6nX0YbRaQoT1Xx4nfUTiKHhU+Aok9uOCMJIyYZVATR6Qafb7/j7tO
UvjwOHztbu84lcJOGmSnw4LcmwNORLuP9IwR0r+O1M3ijEZqDo9TPkvtSz8HZwjU
mxdJwhrUmN0euMcghuiFxW+1XG2eM49ugsdJugiezG2RaIijbIp0nAIvdeaKAgT1
OSSwvWCQ0fkTPyLXE+O6tVqMhlUMdqQlRcyNwmN9svIip9VnwGNq3vA4ePlJm6Fi
i0i/tLqVNlJwFokZ7blW5g8SRgGRuFfXd5XUYLFvy5Teez+/7b1mW95gPQZSJ8kV
Tbx2e0nHAPX4hCAxJ1AB3/zTlnjY+4+WJ9bD5XdgXkeVE8PPh1BEkulhMi1R1OMj
57D1W6OgsBu/Pze78wjAvwO8+NAb1T/2mv2Bd/LY6Q+7hNDqOOhuajyBTxbH41FG
sqx5bKjKOwgTybfV9A0Eo0e4FQBX07yXltBFHaPlyA4sOsIhM59+PxNrEwN1eZrQ
LVVsdBXg8pHxrw==
=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20210809185259.405936-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With CONFIG_SPARSEMEM_EXTREME enabled, __section_nr() which converts
mem_section to section_nr could be costly since it iterates all section
roots to check if the given mem_section is in its range.
On the other hand, __nr_to_section() which converts section_nr to
mem_section can be done in O(1).
Let's pass section_nr instead of mem_section ptr to find_memory_block() in
order to reduce needless iterations.
Link: https://lkml.kernel.org/r/20210707150212.855-3-ohoono.kwon@samsung.com
Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge our fixes branch into next.
That lets us resolve a conflict in arch/powerpc/sysdev/xive/common.c.
Between cbc06f051c ("powerpc/xive: Do not skip CPU-less nodes when
creating the IPIs"), which moved request_irq() out of xive_init_ipis(),
and 17df41fec5 ("powerpc: use IRQF_NO_DEBUG for IPIs") which added
IRQF_NO_DEBUG to that request_irq() call, which has now moved.
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg
(Logan Gunthorpe, Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
-----BEGIN PGP SIGNATURE-----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=spje
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
-----BEGIN PGP SIGNATURE-----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=yEVq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Optionally, provide an index of possible printk messages via
<debugfs>/printk/index/. It can be used when monitoring important
kernel messages on a farm of various hosts. The monitor has to be
updated when some messages has changed or are not longer available by
a newly deployed kernel.
- Add printk.console_no_auto_verbose boot parameter. It allows to
generate crash dump even with slow consoles in a reasonable time
frame.
- Remove printk_safe buffers. The messages are always stored directly
to the main logbuffer, even in NMI or recursive context. Also it
allows to serialize syslog operations by a mutex instead of a spin
lock.
- Misc clean up and build fixes.
* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/index: Fix -Wunused-function warning
lib/nmi_backtrace: Serialize even messages about idle CPUs
printk: Add printk.console_no_auto_verbose boot parameter
printk: Remove console_silent()
lib/test_scanf: Handle n_bits == 0 in random tests
printk: syslog: close window between wait and read
printk: convert @syslog_lock to mutex
printk: remove NMI tracking
printk: remove safe buffers
printk: track/limit recursion
lib/nmi_backtrace: explicitly serialize banner and regs
printk: Move the printk() kerneldoc comment to its new home
printk/index: Fix warning about missing prototypes
MIPS/asm/printk: Fix build failure caused by printk
printk: index: Add indexing support to dev_printk
printk: Userspace format indexing support
printk: Rework parse_prefix into printk_parse_prefix
printk: Straighten out log_flags into printk_info_flags
string_helpers: Escape double quotes in escape_special
printk/console: Check consistent sequence number when handling race in console_unlock()
The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers
that implement these correctly and more efficiently.
The only architectures that retain a private version now are
mips, ia64, um and parisc. I had offered to convert those at all,
but Thomas Bogendoerfer wanted to keep the mips version for the
moment until he had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NB0a
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers that
implement these correctly and more efficiently.
The only architectures that retain a private version now are mips,
ia64, um and parisc. I had offered to convert those at all, but Thomas
Bogendoerfer wanted to keep the mips version for the moment until he
had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs()"
* tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
bitops/non-atomic: make @nr unsigned to avoid any DIV
asm-generic: ffs: Drop bogus reference to ffz location
asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols
asm-generic: remove extra strn{cpy_from,len}_user declarations
asm-generic: uaccess: remove inline strncpy_from_user/strnlen_user
s390: use generic strncpy/strnlen from_user
microblaze: use generic strncpy/strnlen from_user
csky: use generic strncpy/strnlen from_user
arc: use generic strncpy/strnlen from_user
hexagon: use generic strncpy/strnlen from_user
h8300: remove stale strncpy_from_user
asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_user
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
In commit 1e688dd2a3 ("powerpc/bug: Provide better flexibility to
WARN_ON/__WARN_FLAGS() with asm goto") we changed WARN_ON(). Previously
it would take the warning condition, x, and double negate it before
converting the result to int, and passing that int to the underlying
inline asm. ie:
#define WARN_ON(x) ({
int __ret_warn_on = !!(x);
if (__builtin_constant_p(__ret_warn_on)) {
...
} else {
BUG_ENTRY(PPC_TLNEI " %4, 0",
BUGFLAG_WARNING | BUGFLAG_TAINT(TAINT_WARN),
"r" (__ret_warn_on));
The asm then does a full register width comparison with zero and traps
if it is non-zero (PPC_TLNEI).
The new code instead passes the full expression, x, with some arbitrary
type, to the inline asm:
#define WARN_ON(x) ({
...
do {
if (__builtin_constant_p((x))) {
...
} else {
...
WARN_ENTRY(PPC_TLNEI " %4, 0",
BUGFLAG_WARNING | BUGFLAG_TAINT(TAINT_WARN),
__label_warn_on, "r" (x));
As reported[1] by Nathan, when building with clang this can cause
spurious warnings to fire repeatedly at boot:
WARNING: CPU: 0 PID: 1 at lib/klist.c:62 .klist_add_tail+0x3c/0x110
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.14.0-rc7-next-20210825 #1
NIP: c0000000007ff81c LR: c00000000090a038 CTR: 0000000000000000
REGS: c0000000073c32a0 TRAP: 0700 Tainted: G W (5.14.0-rc7-next-20210825)
MSR: 8000000002029032 <SF,VEC,EE,ME,IR,DR,RI> CR: 22000a40 XER: 00000000
CFAR: c00000000090a034 IRQMASK: 0
GPR00: c00000000090a038 c0000000073c3540 c000000001be3200 0000000000000001
GPR04: c0000000072d65c0 0000000000000000 c0000000091ba798 c0000000091bb0a0
GPR08: 0000000000000001 0000000000000000 c000000008581918 fffffffffffffc00
GPR12: 0000000044000240 c000000001dd0000 c000000000012300 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 c0000000017e3200 0000000000000000 c000000001a0e778
GPR28: c0000000072d65b0 c0000000072d65a8 c000000007de72c8 c0000000073c35d0
NIP .klist_add_tail+0x3c/0x110
LR .bus_add_driver+0x148/0x290
Call Trace:
0xc0000000073c35d0 (unreliable)
.bus_add_driver+0x148/0x290
.driver_register+0xb8/0x190
.__hid_register_driver+0x70/0xd0
.redragon_driver_init+0x34/0x58
.do_one_initcall+0x130/0x3b0
.do_initcall_level+0xd8/0x188
.do_initcalls+0x7c/0xdc
.kernel_init_freeable+0x178/0x21c
.kernel_init+0x34/0x220
.ret_from_kernel_thread+0x58/0x60
Instruction dump:
fba10078 7c7d1b78 38600001 fb810070 3b9d0008 fbc10080 7c9e2378 389d0018
fb9d0008 fb9d0010 90640000 fbdd0000 <0b1e0000> e87e0018 28230000 41820024
The instruction dump shows that we are trapping because r30 is not zero:
tdnei r30,0
Where r30 = c000000007de72c8
The WARN_ON() comes from:
static void knode_set_klist(struct klist_node *knode, struct klist *klist)
{
knode->n_klist = klist;
/* no knode deserves to start its life dead */
WARN_ON(knode_dead(knode));
^^^^^^^^^^^^^^^^^
Where:
#define KNODE_DEAD 1LU
static bool knode_dead(struct klist_node *knode)
{
return (unsigned long)knode->n_klist & KNODE_DEAD;
}
The full disassembly shows that clang has not generated any code to
apply the "& KNODE_DEAD" to the n_klist pointer, which is surprising.
Nathan filed an LLVM bug [2], in which Eli Friedman explained that clang
believes it is only passing a single bit to the asm (ie. a bool) and so
the mask of bit 0 with 1 can be omitted, and suggested that if we want
the full 64-bit value passed to the inline asm we should cast to a
64-bit type (or 32-bit on 32-bits).
In fact we already do that for BUG_ENTRY(), which was added to fix a
possibly similar bug in 2005 in commit 32818c2eb6 ("[PATCH] ppc64: Fix
issue with gcc 4.0 compiled kernels").
So cast the value we pass to the inline asm to long.
For GCC this appears to have no effect on code generation, other than
causing sign extension in some cases.
[1]: http://lore.kernel.org/r/YSa1O4fcX1nNKqN/@Ryzen-9-3900X.localdomain
[2]: https://bugs.llvm.org/show_bug.cgi?id=51634
Fixes: 1e688dd2a3 ("powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210901112522.1085134-1-mpe@ellerman.id.au
Since the conversion to generic ptdump we see crashes on 64-bit:
BUG: Unable to handle kernel data access on read at 0xc0eeff7f00000000
Faulting instruction address: 0xc00000000045e5fc
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP __walk_page_range+0x2bc/0xce0
LR __walk_page_range+0x240/0xce0
Call Trace:
__walk_page_range+0x240/0xce0 (unreliable)
walk_page_range_novma+0x74/0xb0
ptdump_walk_pgd+0x98/0x170
ptdump_check_wx+0x88/0xd0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x1a0
ret_from_kernel_thread+0x5c/0x64
What's happening is that have walked off the end of the kernel page
tables, and started dereferencing junk values.
That happens because we initialised the ptdump_range to span all the way
up to 0xffffffffffffffff:
static struct ptdump_range ptdump_range[] __ro_after_init = {
{TASK_SIZE_MAX, ~0UL},
But the kernel page tables don't span that far. So on 64-bit set the end
of the range to be the address immediately past the end of the kernel
page tables, to limit the page table walk to valid addresses.
Fixes: e084728393 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210831135151.886620-1-mpe@ellerman.id.au
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
Core changes:
- The usual set of small fixes and improvements all over the place, but nothing
outstanding
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts
of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=qyll
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
Since commit e1a1ef84cd ("KVM: PPC: Book3S: Allocate guest TCEs on
demand too"), pages for TCE tables for KVM guests are allocated only
when needed. This allows skipping any update when clearing TCEs. This
works mostly fine as TCE updates are handled when the MMU is enabled.
The realmode handlers fail with H_TOO_HARD when pages are not yet
allocated, except when clearing a TCE in which case KVM prints a warning
and proceeds to dereference a NULL pointer, which crashes the host OS.
This has not been caught so far as the change in commit e1a1ef84cd is
reasonably new, and POWER9 runs mostly radix which does not use realmode
handlers. With hash, the default TCE table is memset() by QEMU when the
machine is reset which triggers page faults and the KVM TCE device's
kvm_spapr_tce_fault() handles those with MMU on. And the huge DMA
windows are not cleared by VMs which instead successfully create a DMA
window big enough to map the VM memory 1:1 and then VMs just map
everything without clearing.
This started crashing now as commit 381ceda88c ("powerpc/pseries/iommu:
Make use of DDW for indirect mapping") added a mode when a dymanic DMA
window not big enough to map the VM memory 1:1 but it is used anyway,
and the VM now is the first (i.e. not QEMU) to clear a just created
table. Note that upstream QEMU needs to be modified to trigger the VM to
trigger the host OS crash.
This replaces WARN_ON_ONCE_RM() with a check and return, and adds
another warning if TCE is not being cleared.
Fixes: e1a1ef84cd ("KVM: PPC: Book3S: Allocate guest TCEs on demand too")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210827040706.517652-1-aik@ozlabs.ru
API updates:
- Treewide conversion to generic_handle_domain_irq() for anything
that looks like a chained interrupt controller
- Update the irqdomain documentation
- Use of bitmap_zalloc() throughout the tree
New functionalities:
- Support for GICv3 EPPI partitions
Fixes:
- Qualcomm PDC hierarchy fixes
- Yet another priority decoding fix for the GICv3 pseudo-NMIs
- Fix the apple-aic driver irq_eoi() callback to always unmask
the interrupt
- Properly handle edge interrupts on loongson-pch-pic
- Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE
-----BEGIN PGP SIGNATURE-----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=bdm2
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- API updates:
- Treewide conversion to generic_handle_domain_irq() for anything
that looks like a chained interrupt controller
- Update the irqdomain documentation
- Use of bitmap_zalloc() throughout the tree
- New functionalities:
- Support for GICv3 EPPI partitions
- Fixes:
- Qualcomm PDC hierarchy fixes
- Yet another priority decoding fix for the GICv3 pseudo-NMIs
- Fix the apple-aic driver irq_eoi() callback to always unmask
the interrupt
- Properly handle edge interrupts on loongson-pch-pic
- Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE
Link: https://lore.kernel.org/r/20210828121013.2647964-1-maz@kernel.org
