674e318089
682 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
4bbdb725a3 |
IOMMU Updates for Linux v6.7
Including:
- Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate
drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
- ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to
move the CD table into the master, paving the way
for '->set_dev_pasid()' support on non-SVA domains
- Minor cleanups to the SVA code
- Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function.
- AMD IOMMU:
- Initial patches for SVA support (not complete yet)
- S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
- Some smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmVJFcEACgkQK/BELZcB
GuMgDxAAsnYVQjQ7wRkwR0rHARuEaJ+Lz2vkLNH+uYXjBzhFe2bT+ykMcZysAkdK
A5PMLOFT5Etf+PAqOM0CoIGQFOefAId6uGl7S61Fp9ZWDKhMrOBFWhxGOaufA1Du
tNvt3i66hwPSDZa82kY3wRCluYtj0aBBzmM6ZTwBwFZdQ7LABMtE8OxisqncVvq0
H6vhV213fqvhCFSQJ6PnTAEiv70WvWBWygA+Z/gwYf9hypZQae91PNXdK9313a9z
OvCzGBkL/R5/3KkJd88UhFwyYzyNGxq/DmH1etawYR5gYZ8UT/Z/sYpcx9hlO7qr
eENPqeQc+YHZXpKqkaq66HBA1FSnXUqRZLl4cVaZahRRMe/yArsBM6R0W1AfkMAR
rZxwHKoHUWeuHQLMVvmSDNL57h/GJJpTXjRc8HMxLZkVp+ScvnT5XCYHWWzRdCdx
TcC/pJ1tet0FQ8rw09ovlwpGVA6eojWvcpVbLVLfGN8ZWViSVfvNFoPNb7HsGK6M
iRi+L41Y7s63cyogC/Gsae2RAvYv29ZpvE91lmon2u+VBlTpMdOFX9EhWS6RqOBF
cV30bhsw0dyCB7v5jDPtABYEOaR6l1mPLhn1gX3u0Ue/tmPhLX69k4bVWBY6wP3p
gmmJD9ub8FuPQtFCGPE7/8ZINjGGrfiKO24DNI2Ty3XEeq21hU4=
=UyWC
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
|
||
|
Linus Torvalds
|
babe393974 |
The number of commits for documentation is not huge this time around, but
there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations.
- The much-discussed documentation of the confidential-computing threat
model.
- Powerpc and RISCV documentation move under Documentation/arch - these
complete this particular bit of documentation churn.
- A large traditional-Chinese documentation update.
- A new document on backporting and conflict resolution.
- Some kernel-doc and Sphinx fixes.
Plus the usual smattering of smaller updates and typo fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmVBNv8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y0JkH/36MOpkaDnsY69/dMRKSuD4mAAP2H6LS8V63
SsMgH5VCj8lcy/Tz1+J89t14pbcX8l0viKxSo4UxvzoJ5snrz8A8gZ9oqY7NCcNs
nMtolnN5IwdbgGnEGqASSLsl07lnabhRK0VYv9ZO7lHjYQp97VsJ/qrjJn385HFE
vYW8iRcxcKdwtuuwOtbPcdAMjP54saJdNC5wMLsfMR0csKcGbzaSNpqpiGovzT7l
phG2DSxrJH0gUZyeGPryroNppaf+mVKSDSiwRdI8mzm0J67p6dZYYwBS1Iw6Awbf
8iYoj6W63/FVQbXffPx5d6ffOSQh4JkAskxgBUOzluSGusSDc+4=
=9HU5
-----END PGP SIGNATURE-----
Merge tag 'docs-6.7' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
||
|
Linus Torvalds
|
385903a7ec |
SoC driver updates for 6.7
The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware drivers.
- Arm FF-A firmware support gains support for v1.1 specification features,
in particular notification and memory transaction descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic,
atmel, tegra, aspeed, vexpress, mediatek, samsung and more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper.
-----BEGIN PGP SIGNATURE-----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=QIut
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
||
Sascha Hauer
|
481d97ba61 |
PM / devfreq: rockchip-dfi: add support for RK3588
Add support for the RK3588 to the driver. The RK3588 has four DDR channels with a register stride of 0x4000 between the channel registers, also it has a DDRMON_CTRL register per channel. Link: https://lore.kernel.org/all/20231018061714.3553817-20-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
|
Sascha Hauer
|
4d586b5724 |
PM / devfreq: rockchip-dfi: Add perf support
The DFI is a unit which is suitable for measuring DDR utilization, but
so far it could only be used as an event driver for the DDR frequency
scaling driver. This adds perf support to the DFI driver.
Usage with the 'perf' tool can look like:
perf stat -a -e rockchip_ddr/cycles/,\
rockchip_ddr/read-bytes/,\
rockchip_ddr/write-bytes/,\
rockchip_ddr/bytes/ sleep 1
Performance counter stats for 'system wide':
1582524826 rockchip_ddr/cycles/
1802.25 MB rockchip_ddr/read-bytes/
1793.72 MB rockchip_ddr/write-bytes/
3595.90 MB rockchip_ddr/bytes/
1.014369709 seconds time elapsed
perf support has been tested on a RK3568 and a RK3399, the latter with
dual channel DDR.
Link: https://lore.kernel.org/all/20231019064819.3496740-1-s.hauer@pengutronix.de/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[cw00.choi: Fix typo from 'write_acccess' to 'write_access']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
||
|
Sascha Hauer
|
d8c6e337e7 |
PM / devfreq: rockchip-dfi: Handle LPDDR4X
In the DFI driver LPDDR4X can be handled in the same way as LPDDR4. Add the missing case. Link: https://lore.kernel.org/all/20231018061714.3553817-13-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
|
Sascha Hauer
|
076b0597f5 |
PM / devfreq: rockchip-dfi: Add RK3568 support
This adds RK3568 support to the DFI driver. Only iniitialization differs from the currently supported RK3399. Link: https://lore.kernel.org/all/20231018061714.3553817-11-s.hauer@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
|
Sascha Hauer
|
74002e668d |
PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines
The DDRTYPE defines are named to be RK3399 specific, but they can be used for other Rockchip SoCs as well, so replace the RK3399_PMUGRF_ prefix with ROCKCHIP_. They are defined in a SoC specific header file, so when generalizing the prefix also move the new defines to a SoC agnostic header file. While at it use GENMASK to define the DDRTYPE bitfield and give it a name including the full register name. Link: https://lore.kernel.org/all/20231018061714.3553817-9-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
Sumit Gupta
|
ea608a01d4 |
firmware: tegra: Add suspend hook and reset BPMP IPC early on resume
Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.
One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.
The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.
Fixes:
|
||
Deming Wang
|
bde3ce7257 |
firmware: tegra: Fix a typo
successfully, not 'succesfully' Signed-off-by: Deming Wang <wangdeming@inspur.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Costa Shulyupin
|
17e02586ed |
docs: move powerpc under arch
and fix all in-tree references. Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20230826165737.2101199-1-costa.shul@redhat.com |
||
Jason Gunthorpe
|
c462944901 |
iommu/tegra-gart: Remove tegra-gart
Thierry says this is not used anymore, and doesn't think it makes sense as
an iommu driver. The HW it supports is about 10 years old now and newer HW
uses different IOMMU drivers.
As this is the only driver with a GART approach, and it doesn't really
meet the driver expectations from the IOMMU core, let's just remove it
so we don't have to think about how to make it fit in.
It has a number of identified problems:
- The assignment of iommu_groups doesn't match the HW behavior
- It claims to have an UNMANAGED domain but it is really an IDENTITY
domain with a translation aperture. This is inconsistent with the core
expectation for security sensitive operations
- It doesn't implement a SW page table under struct iommu_domain so
* It can't accept a map until the domain is attached
* It forgets about all maps after the domain is detached
* It doesn't clear the HW of maps once the domain is detached
(made worse by having the wrong groups)
Cc: Thierry Reding <treding@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
||
|
Linus Torvalds
|
0468be89b3 |
IOMMU Updates for Linux v6.6
Including:
- Core changes:
- Consolidate probe_device path
- Make the PCI-SAC IOVA allocation trick PCI-only
- AMD IOMMU:
- Consolidate PPR log handling
- Interrupt handling improvements
- Refcount fixes for amd_iommu_v2 driver
- Intel VT-d driver:
- Enable idxd device DMA with pasid through iommu dma ops.
- Lift RESV_DIRECT check from VT-d driver to core.
- Miscellaneous cleanups and fixes.
- ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
- Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
- Support for Qualcomm's legacy firmware implementation featured on
at least MSM8956 and MSM8976.
- Match compatible strings for Qualcomm SM6350 and SM6375 SoC variants
- SMMUv3:
- Use 'ida' instead of a bitmap for VMID allocation
- Rockchip IOMMU:
- Lift page-table allocation restrictions on newer hardware
- Mediatek IOMMU:
- Add MT8188 IOMMU Support
- Renesas IOMMU:
- Allow PCIe devices
- Usual set of cleanups an smaller fixes
-----BEGIN PGP SIGNATURE-----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=RV+G
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Consolidate probe_device path
- Make the PCI-SAC IOVA allocation trick PCI-only
AMD IOMMU:
- Consolidate PPR log handling
- Interrupt handling improvements
- Refcount fixes for amd_iommu_v2 driver
Intel VT-d driver:
- Enable idxd device DMA with pasid through iommu dma ops
- Lift RESV_DIRECT check from VT-d driver to core
- Miscellaneous cleanups and fixes
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Allow ASIDs to be configured in the DT to work around Qualcomm's
broken hypervisor
- Fix clocks for Qualcomm's MSM8998 SoC
- SMMUv2:
- Support for Qualcomm's legacy firmware implementation featured
on at least MSM8956 and MSM8976
- Match compatible strings for Qualcomm SM6350 and SM6375 SoC
variants
- SMMUv3:
- Use 'ida' instead of a bitmap for VMID allocation
- Rockchip IOMMU:
- Lift page-table allocation restrictions on newer hardware
- Mediatek IOMMU:
- Add MT8188 IOMMU Support
- Renesas IOMMU:
- Allow PCIe devices
.. and the usual set of cleanups an smaller fixes"
* tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits)
iommu: Explicitly include correct DT includes
iommu/amd: Remove unused declarations
iommu/arm-smmu-qcom: Add SM6375 SMMUv2
iommu/arm-smmu-qcom: Add SM6350 DPU compatible
iommu/arm-smmu-qcom: Add SM6375 DPU compatible
iommu/arm-smmu-qcom: Sort the compatible list alphabetically
dt-bindings: arm-smmu: Fix MSM8998 clocks description
iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope()
iommu/vt-d: Fix to convert mm pfn to dma pfn
iommu/vt-d: Fix to flush cache of PASID directory table
iommu/vt-d: Remove rmrr check in domain attaching device path
iommu: Prevent RESV_DIRECT devices from blocking domains
dmaengine/idxd: Re-enable kernel workqueue under DMA API
iommu/vt-d: Add set_dev_pasid callback for dma domain
iommu/vt-d: Prepare for set_dev_pasid callback
iommu/vt-d: Make prq draining code generic
iommu/vt-d: Remove pasid_mutex
iommu/vt-d: Add domain_flush_pasid_iotlb()
iommu: Move global PASID allocation from SVA to core
iommu: Generalize PASID 0 for normal DMA w/o PASID
...
|
||
|
Linus Torvalds
|
f8fd5c2483 |
This pull request is full of clk driver changes. In fact, there aren't any
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
||
|
Linus Torvalds
|
a1c19328a1 |
ARM: SoC cleanups for 6.6
These are all minor cleanups for platform specific code in arch/arm/ and some of the associated drivers. The majority of these are work done by Rob Herring to improve the way devicetreee header files are handled. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTuaDEACgkQYKtH/8kJ UicmKQ/6A506T45KbbCLsqMuJsGdjMdOKdBecssLWhFNhRoJhJB6YilQVjBUAK4D vDqc425IcxXwaW+4OVBFCgVpKKMlrLSpHVJHl6QaGsxAZt5xdhwcA4ttQcFvoQtK csuwOadO9g1K4Px29J8GFR/FvFNt8kHRxbRC3xcGfFsFvgXISAiLUv8w6Z5O8Z5W /sp+EsOkJWTTKu+vtcMXccGqM9eGNOfPK1bCUElJ1+HW3jZrbRw0zZrQ2QS72N2P wpO2f6JUTpiiMH8XhQd3REi3Kli+g0GxVlCStZc/0qf/uW70YanF4CPDdSOVJ5OL l05Qfx+/XsGyqt3el03UoIXfM1YzvWn5BeqNG/QGHkai7Lp/c8LvSk1NiwaS0dzi QcPCEK67wjoaBCdSAMKGYM/qlmffuLh9/NJM5dzdBE8zQ5rC1XorR2aHGyISQJt6 tDlDXy14zyR3KRxOoqP6cWp+PFDcBksd44cxGbp/Lcc389UKxX8j4fM8yUNT+4Rh gZ5OtUMs5QhFJBhBbBxW6O3TMuhwjSdW7IEQafKiiHEOFucf6Zcxd9u9B2yzsdtU za6mpA/NEBIc3olv6IFIdT24+M3PLhqCbu6YL5YI4jBf0QNpXjRBr+EOtvt2mvC9 JkoggyCf5LdDt833G/TBPpx0VYi8h0m7cQnMw4JjOIA8FvCwIdc= =c9NM -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC cleanups from Arnd Bergmann: "These are all minor cleanups for platform specific code in arch/arm/ and some of the associated drivers. The majority of these are work done by Rob Herring to improve the way devicetreee header files are handled" * tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) ARM: davinci: Drop unused includes ARM: s5pv210: Explicitly include correct DT includes ARM: dove: Drop unused includes ARM: mvebu: Explicitly include correct DT includes Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung MAINTAINER: samsung: document dtbs_check requirement for Samsung Documentation/process: maintainer-soc: add clean platforms profile MAINTAINERS: soc: reference maintainer profile ARM: nspire: Remove unused header file mmio.h ARM: nspire: Use syscon-reboot to handle restart soc: fsl: Explicitly include correct DT includes soc: xilinx: Explicitly include correct DT includes soc: sunxi: Explicitly include correct DT includes soc: rockchip: Explicitly include correct DT includes soc: mediatek: Explicitly include correct DT includes soc: aspeed: Explicitly include correct DT includes firmware: Explicitly include correct DT includes bus: Explicitly include correct DT includes ARM: spear: Explicitly include correct DT includes ARM: mvebu: Explicitly include correct DT includes ... |
||
Yue Haibing
|
49e62a0462 |
net: mscc: ocelot: Remove unused declarations
Commit |
||
Joerg Roedel
|
d8fe59f110 | Merge branches 'apple/dart', 'arm/mediatek', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next | ||
Martin Kaiser
|
b8a06b125c |
clk: imx25: print silicon revision during init
Print the imx25 silicon revision when the clocks are initialised. Use the same mechanism as for imx27, i.e. call mx25_revision. This function is unused at the moment. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230802184046.153394-2-martin@kaiser.cx Signed-off-by: Abel Vesa <abel.vesa@linaro.org> |
||
Arnd Bergmann
|
61029e2b37 |
AT91 SoC updates for 6.6:
It contains: - explicitly include correct DT includes from Rob - one cleanup which removes unused extern declaration on atmel_tcb.h -----BEGIN PGP SIGNATURE----- iI8EABYIADcWIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZMx+PxkcY2xhdWRpdS5i ZXpuZWFAZ21haWwuY29tAAoJEJ6OuD83Zfv9RHAA/jMPJ6uQKDDP9iYzJD4moCC2 H614pQHGJx8PLnxt7kPaAP4xrN1l9+Yo0+31r8bDSjGBksmOK0g262shKXgsY79G AA== =ab+a -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTXQ7MACgkQYKtH/8kJ Uidn1BAAuEEA+N3YAf6gRBQ7xJ1y+UuZr945SjKWZtU4gvKB04a8N1VdIGMUCP5Z QlmaXbMwrALPfs4oqu4NmjI5MsB9IZNLKb35C5LUAltHTfaG36FLmbrs0kIbQ6I9 ES3Sr5rHM+ec7RewbuVqx3DK4VzJJQN++CECTkRH9j6cGkGIGRyCtD3jHp+LROv0 73UJ0Iv7FBkDNprhhCjhSQwUiTb0kHiRORhOnvle6JcnIYHaN41/qL1M0VRVBmsb HQAT2KH7c2Br9hSTNYBJG77RXNt50CNIM5fviGFTQw+d6OugDjNwsrRzKFrM4uR+ XDHAAL9GK/QEZ2UClCuYY8q1oezoVeUjUZw70PzU8I6lXDi9373pY1E/K3HIG7WZ y7NrWLGCzxpc2/OBBNl57hiMbqdnV+a+53VMpKLtjobt3xHVMzpoluf1KRKcqf9Z SmOYV8wZs+pCAtTYBj5+RfQuLfTmJHRbSB42DHMWncHt5hRbGmAvTLMEPFy7Gyyw ogKN2VsqViQS0C5pI0EO4119Pv4OPJzJP1qvmtZgZbwMj7WVLaOq3tri6fNuIIsy Uy+uuEFyppAsegJ7VQmpsk8ql+R0XAc0fk8hw+iob+S0hPPBoSEtemL8mkYurTuN WeKTk1AHPtl5Ty7Fvo32G38SDxwuuBbc67IbiPzN44UZ6gATa+g= =8ksf -----END PGP SIGNATURE----- Merge tag 'at91-soc-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm AT91 SoC updates for 6.6: It contains: - explicitly include correct DT includes from Rob - one cleanup which removes unused extern declaration on atmel_tcb.h * tag 'at91-soc-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: Remove unused extern declarations ARM: at91: Explicitly include correct DT includes soc: microchip: Explicitly include correct DT includes Link: https://lore.kernel.org/r/20230804044118.231478-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Chengci.Xu
|
946e719ce6 |
iommu/mediatek: Add enable IOMMU SMC command for INFRA masters
Prepare for MT8188. In MT8188, the register which enables IOMMU for INFRA masters are in the secure world for security concerns, therefore we add a SMC command for INFRA masters to enable IOMMU in ATF. Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230602090227.7264-5-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
YueHaibing
|
96a49448c4 |
ARM: at91: Remove unused extern declarations
commit
|
||
|
Arnd Bergmann
|
b1e052903c |
Memory controller drivers - fixes for v6.5
Two fixes are needed for Tegra194 memory controllers caused by the same Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now interconnect from the memory controller, which was set only for Tegra234, but not for Tegra194, causing probe deferrals. Expose some dummy interconnect provider for Tegra194, to satisfy PCI driver needs. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmTA3VAQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD1zj9D/4peXLyTUWFArNLAaq3PbOHQRuPbC1MMdWN VRCqjDVGNXEYPnbh1b2kMhi2iwoBk9HeAt6HFYHgABdNZBK5VBUMDuJnT1ocNExD 8OBV3qAM+ia3TqOlhE5PVGiMudhd1R020/tIrzHB+YaiT2JpqKXo8nlXVfhwti1c yyZmIAmi9uQkC3Zn7R+5I0A5atNLa7BXAmpy8A/l7K8ojwnAxiJLXAI/+YHs0moW GPB9Nk4oYzEJDyQESKNK0ddvggwaZNCbK+wIBcEBFXXvybVr72pMYSeIG+UNpTf+ uwc5nxgHwhqNTxO4WtGYpVuAA8uPelJ4YIbcEdoJoNn5/dfzdiBYhetWPquOBMxN p1BIVx/pFujzAAjY2VvPAEbSxctMUKmLmRRAbJC3II633JxjwKahVMTOCslvtuSr /jbChJ4Ih2RL15qMmj2O/mP2qjivG/HoywtG3Rp4w5E6CfWXs3b6ytEKdifW9IEk GjctklZm1E8Jz+nVhmPfm1A+pLxG80RMEgV9kp5bEjdeNjE/SQByTlhCxP/1SSHA yT4RO3GFdBFKjpfl2xK1f74ml/ZA9KOu8WO+laD0gZVfMzX68wQWc2jIpJYtPhtO p8n8zzC2fEbzvY1Adth7XR79P1e/3yp2NZv1vTRIP6T4y+d8e2v2mqNxZxH/SFRj PS2KDX7VMw== =1ARR -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTCc+YACgkQYKtH/8kJ UifQjQ//bIgDWLc6LsU0wnF8CEScqAxvTmXMXq0tp8o55uvUjdCjdNHRkrxQuPff /vfXJAhzvLlsovR/DghTeex8V1O1285TDt20J0UXXA7PdGTzvpjjW/+qH8OmmRDV IvP8WUWHHbgazJZaayYMLn5uAf1Ofz8ZzTkbrdYKQ9eORhwdMWC6bDNJHZF2cxEa X82FGvYL270x4IhIQpt5yg5aDFKCX6n/SEYb8H3kX61qb1TIQ1Yo3Fsr0Wr7L/1Y 6esl0zmMo7k0Jv9+9wA3u6AhYoYq6F9EvaQk9MdizG2h44o7MiO7SrSoEHuFbMbp NAyah59WSSiFV3GL9oKchgKFVqXwqiF0YZJyNTetbg70AK3Q9Yu0CDVuQFKvLtkN jh3t3XxBkX8YizDQQCCkxULEaqR2UpamoHXnnt84L4g92hYRLv0wXGWLQrAxKzIP jU+foYfkAfglfpdGI9pvz0gqdsvTfmFKKoLdlkCwgckWkydq9ZuVkAmuYFN17v2o /ihwqgZHFBZeXbLGmplb0uAHOJ7NymyNjVOSK+1C7m1WOcX4k43/MGk8KVYTuWXF V7PwiG2miUbUwkqRTUTsu+S4G7rF5MM8NoT8jLWHvlVqdig8Z5hbyvV2jPaLgEbT Z0lpoRNhBa5UP1Wgu0LNkuHPPCA7J0VVqnTCf1Wj7HrS7/rn57M= =NC+w -----END PGP SIGNATURE----- Merge tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes Memory controller drivers - fixes for v6.5 Two fixes are needed for Tegra194 memory controllers caused by the same Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now interconnect from the memory controller, which was set only for Tegra234, but not for Tegra194, causing probe deferrals. Expose some dummy interconnect provider for Tegra194, to satisfy PCI driver needs. * tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: tegra: make icc_set_bw return zero if BWMGR not supported memory: tegra: Add dummy implementation on Tegra194 Link: https://lore.kernel.org/r/20230726084811.124038-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Thierry Reding
|
d1478aea64 |
memory: tegra: Add dummy implementation on Tegra194
With the introduction of commit |
||
Vladimir Oltean
|
c60819149b |
net: dsa: felix: make vsc9959_tas_guard_bands_update() visible to ocelot->ops
In a future change we will need to make ocelot_port_update_active_preemptible_tcs() call vsc9959_tas_guard_bands_update(), but that is currently not possible, since the ocelot switch lib does not have access to functions private to the DSA wrapper. Move the pointer to vsc9959_tas_guard_bands_update() from felix->info (which is private to the DSA driver) to ocelot->ops (which is also visible to the ocelot switch lib). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-3-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
009d30f1a7 |
net: mscc: ocelot: extend ocelot->fwd_domain_lock to cover ocelot->tas_lock
In a future commit we will have to call vsc9959_tas_guard_bands_update()
from ocelot_port_update_active_preemptible_tcs(), and that will be
impossible due to the AB/BA locking dependencies between
ocelot->tas_lock and ocelot->fwd_domain_lock.
Just like we did in commit
|
||
|
Linus Torvalds
|
6843306689 |
Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9yzk
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
|
||
|
Linus Torvalds
|
e4c8d01865 |
ARM: SoC drivers for 6.5
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSdmbIACgkQYKtH/8kJ
UicewQ/6Aq8j5pBFYBimZoyQ0bi9z+prGrHoDDYLew2vKjtOXJl5z7ZnM3J1oyPt
Zvis3IaGkHJCuuqotPdsquZrzHq8slzXzwkHPfHORJBC4gV0V/vMS8w32tO5FfTq
ULrMyWnbsU7Udeywc2xuEpAoC9+bXX9brnCpa3H41peIGZKM+0g7EE6FASt3YaOk
O+ZMSGqF8QbCqSQrUH3GudFlFMy/VxIvwuUsbLt8aNkRACunQZXVgUdArvLV49nX
SElFN7hOVRoVDv0rgYMxlwElymrta/kMyjLba8GU1GIhzyDGozVqIJQAnsQ3f6CC
yyzaJm27zzJH0mx9jx4W+JLBdjqDL4ctE2WyllRVIpTGYMHiMQtutHNwtNupIuD5
j9j/fIVQWZqOdWXnA6V/CHYN1MZBRTH3KQcnLlYPC01dWKThPDnrHGfwOkfsrwtN
zuERJJ+gd5b8KW4dmy1ueDOSB8162LxbS7iHxpOBGySmqVOYj3XUqACZhKRfXfIQ
BVj9punCE/gO2fMb9IZByjeOzgtV+PBRmPxoglyaGkT4fVfL06kEbpKFYbXXq9b/
aAS/U84gGr8ebWsOXszwDnBzTZRzjMVv/T9KDTTJuWbBEPNyCR7fUG0cZ50rSKnJ
2cTPe3a0sS6LaBt71qfExCIfxG+cJ2c3N1U5/jb2C49Aob45obs=
=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
||
|
Vladimir Oltean
|
45d0fcb5bc |
net: mscc: ocelot: don't keep PTP configuration of all ports in single structure
In a future change, the driver will need to determine whether PTP RX timestamping is enabled on a port (including whether traps were set up on that port in particular) and that is currently not possible. The driver supports different RX filters (L2, L4) and kinds of TX timestamping (one-step, two-step) on its ports, but it saves all configuration in a single struct hwtstamp_config that is global to the switch. So, the latest timestamping configuration on one port (including a request to disable timestamping) affects what gets reported for all ports, even though the configuration itself is still individual to each port. The port timestamping configurations are only coupled because of the common structure, so replace the hwtstamp_config with a mask of trapped protocols saved per port. We also have the ptp_cmd to distinguish between one-step and two-step PTP timestamping, so with those 2 bits of information we can fully reconstruct a descriptive struct hwtstamp_config for each port, during the SIOCGHWTSTAMP ioctl. Fixes: |
||
Uwe Kleine-König
|
281bf6b94a |
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
Only the imx-gpt timer driver makes use of enum imx_gpt_type that is otherwise unused. Move its definition into the timer-imx-gpt driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230328100531.879485-3-u.kleine-koenig@pengutronix.de |
||
|
Arnd Bergmann
|
095ee35a33 |
memory: tegra: Changes for v6.5-rc1
This introduces an interconnect provider for the memory controller and external memory controller found on Tegra234 chips that will eventually be used to dynamically scale the EMC frequency based on a device's bandwidth needs. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmSDRTcTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoaKyD/4sjVTfnZ9YoXkcPFd6zr1I8pNMC2pk yyDtSHN0EGcw5goSHF+Akqv5O0JEh8YAW0pQ+fxO3KdEGlZEYNBlC9rgjpz7TzHE 6zsajiIvLYOwSTbjVVlFn2U4H6ihFdawzag/vRDqu1b3wExus9VigWnEgHtj/RJT q1ODZXkwZrOBR3Z034ji6jJIQXVg54sEvt/Zlq7iYXabLXg8u5NDEbSd4GVBNwPB SwBUfc9ja/Y5xUKaXA/hqQ7gIfm4Hs5XVyCbLT75j259qVantbxtlURB3cme080m rRdyScngYFxuyBzQtQzLq+6u5tYJN6q3WUlXWvxI/gMw2IezFH6p0jXfCByriSMD 6d7h6Jk2d6bub3RUWLsurruHYSPqqvM9tI5sN6ZY4nq4uo0MplFEcrQBFXIJAJhy X/JaO9166K0mX73wNFoEmmay5ZTd8wLKvGdlfaHUdUKJcldhh3Ivhl2r0w9Ij6qE w1+QjUxtgabSb/69+3o2m4iil2I5Scc8jr3Vu1riW1yemKSQX7xS0PZ4a6k5/78O 2NGaFZqvs7Uo1EYGz91f50Go1hGLZOH0MMMjd+NSj3pZQvpB+BZ8rlGG7umbjIUF aTBj5hcXN3bBx4VQGnLFwUEbEd6GIog+d6COtpmQzixwdXxw8aUB/m7ouFSegz34 MMEoE0i11HMlyg== =OJYg -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSTVC0ACgkQYKtH/8kJ UieyxRAAiJKwY9bILWnKTPIJ+AlTDzp5ramSVsjD7KzlH6/pgWydgzRRhP/9zz87 f1/wnmMJ2vgWWa1g1NfeX4P8vZyHYsGiuBvQrevzP6Ekc0q19j6CI5tu5zDTy1aF dqZtkpOTqO5+ioTL5bTem2XISvWNnK1TyaWzSHnvbNgfvrWtMiqij9mJyeaF3hdm yCN0XbO8UaChbUobjgjzwg09BvrsN2CtG/2DATIgHUWDrkW0vER0QZRCF0V9mg3O 5kszkfLAsm/7TcQiPAeHEc2IXNRnYl1f4Gkjg7e47Itxkv5+rm/liejdYMZfIQmc Kj0eQerTB974qrcBsrwVE12lNwDK4+3FbAWOZjbXaLtYf27+pSjoG0YVduv8VUNi H81ehi+pHma7Boekf2i9XMVC1+EBBlpPBjxCpaDN5ck7kIkO2bBMX9avTGE9qfn5 9lpU64z6xHv/3YEcnOty4Ggs0V3ZLz4iRkFfWUDtYYsXnFyes1K9ooaDzHojisk0 /vE0KqImlZdlBuBUYpgEBcM/s4V1PtpN3nQtVpUUb77M90GmTLGwLjM8+Y1+JuXV N9eGiPR8YhuMzy4eQR4YEfIqPqwEstRqkOicctJaCDi3Hg4OXmUdUDS66vV9wm+V ntfdphilxBp2EHG42IhKkVH5LdSm/17xbxd2t1RwZ7cMZ7Q5hpw= =7PpG -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.5-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers memory: tegra: Changes for v6.5-rc1 This introduces an interconnect provider for the memory controller and external memory controller found on Tegra234 chips that will eventually be used to dynamically scale the EMC frequency based on a device's bandwidth needs. * tag 'tegra-for-6.5-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: Make CPU cluster BW request a multiple of MC channels memory: tegra: Add software memory clients in Tegra234 memory: tegra: Add memory clients for Tegra234 memory: tegra: Add interconnect support for DRAM scaling in Tegra234 dt-bindings: tegra: Add ICC IDs for dummy memory clients dt-bindings: tegra: Document compatible for IGX Link: https://lore.kernel.org/r/20230609193620.2275240-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Sumit Gupta
|
e852af72a7 |
memory: tegra: Make CPU cluster BW request a multiple of MC channels
Make CPU cluster's bandwidth (BW) request a multiple of MC channels. CPU OPP tables have BW info per MC channel. But, the actual BW depends on the number of MC channels which can change as per the boot config. Get the number of MC channels which are actually enabled in current boot configuration and multiply the BW request from a CPU cluster with the number of enabled MC channels. This is not required to be done for other MC clients. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Sumit Gupta
|
9a38cb2766 |
memory: tegra: Add interconnect support for DRAM scaling in Tegra234
Add Interconnect framework support to dynamically set the DRAM bandwidth from different clients. Both the MC and EMC drivers are added as ICC providers. The path for any request is: MC-Client[1-n] -> MC -> EMC -> EMEM/DRAM MC client's request for bandwidth will go to the MC driver which passes the client request info like BPMP Client ID, Client type and the Bandwidth to the BPMP-FW. The final DRAM freq to achieve the requested bandwidth is set by the BPMP-FW based on the passed parameters. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Stefan Kristiansson
|
d944364651 |
soc/tegra: fuse: Add support for Tegra264
Add support for Tegra264 to the fuse handling code. Signed-off-by: Stefan Kristiansson <stefank@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Linus Torvalds
|
e81507acdc |
Nothing looks out of the ordinary in this batch of clk driver updates. There
are a couple patches to the core clk framework, but they're all basically
cleanups or debugging aids. The driver updates and new additions are dominated
in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of
new drivers for various SoCs, and MediaTek gained a bunch of drivers for
MT8188. The MediaTek drivers are being modernized as well, so there are
updates all over that vendor's clk drivers. There's also a couple other new clk
drivers in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual collection of
non-critical fixes and cleanups to various clk drivers. It's good to see that
we're getting more cleanups and modernization patches. Maybe one day we'll be
able to properly split clk providers from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to
get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code to
common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm SM6375,
MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588
-----BEGIN PGP SIGNATURE-----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=bTtL
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
|
||
|
Linus Torvalds
|
7d8d20191c |
Timekeeping and clocksource/event driver updates the second batch:
- A trivial documentation fix in the timekeeping core
- A really boring set of small fixes, enhancements and cleanups in the
drivers code. No new clocksource/clockevent drivers for a change.
-----BEGIN PGP SIGNATURE-----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=LWO6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"Timekeeping and clocksource/event driver updates the second batch:
- A trivial documentation fix in the timekeeping core
- A really boring set of small fixes, enhancements and cleanups in
the drivers code. No new clocksource/clockevent drivers for a
change"
* tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix references to nonexistent ktime_get_fast_ns()
dt-bindings: timer: rockchip: Add rk3588 compatible
dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible
clocksource/drivers/ti: Use of_property_read_bool() for boolean properties
clocksource/drivers/timer-ti-dm: Fix finding alwon timer
clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table
clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void
clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void
clocksource/drivers/timer-ti-dm: Improve error message in .remove
clocksource/drivers/timer-stm32-lp: Mark driver as non-removable
clocksource/drivers/sh_mtu2: Mark driver as non-removable
clocksource/drivers/timer-ti-dm: Use of_address_to_resource()
clocksource/drivers/timer-imx-gpt: Remove non-DT function
clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer
|
||
|
Linus Torvalds
|
1c15ca4e4e |
sound updates for 6.4-rc1
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
|
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
Fabio Estevam
|
f68a40ee47 |
clocksource/drivers/timer-imx-gpt: Remove non-DT function
mxc_timer_init() was originally only used by non-DT i.MX platforms. i.MX has already been converted to be a DT-only platform. Remove the unused mxc_timer_init() function. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230307124313.708255-1-festevam@denx.de |
||
|
Vladimir Oltean
|
403ffc2c34 |
net: mscc: ocelot: add support for preemptible traffic classes
In order to not transmit (preemptible) frames which will be received by the link partner as corrupted (because it doesn't support FP), the hardware requires the driver to program the QSYS_PREEMPTION_CFG_P_QUEUES register only after the MAC Merge layer becomes active (verification succeeds, or was disabled). There are some cases when FP is known (through experimentation) to be broken. Give priority to FP over cut-through switching, and disable FP for known broken link modes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
aac80140dc |
net: mscc: ocelot: add support for mqprio offload
This doesn't apply anything to hardware and in general doesn't do anything that the software variant doesn't do, except for checking that there isn't more than 1 TXQ per TC (TXQs for a DSA switch are a dubious concept anyway). The reason we add this is to be able to parse one more field added to struct tc_mqprio_qopt_offload, namely preemptible_tcs. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
7bf4a5b071 |
net: mscc: ocelot: optimize ocelot_mm_irq()
The MAC Merge IRQ of all ports is shared with the PTP TX timestamp IRQ of all ports, which means that currently, when a PTP TX timestamp is generated, felix_irq_handler() also polls for the MAC Merge layer status of all ports, looking for changes. This makes the kernel do more work, and under certain circumstances may make ptp4l require a tx_timestamp_timeout argument higher than before. Changes to the MAC Merge layer status are only to be expected under certain conditions - its TX direction needs to be enabled - so we can check early if that is the case, and omit register access otherwise. Make ocelot_mm_update_port_status() skip register access if mm->tx_enabled is unset, and also call it once more, outside IRQ context, from ocelot_port_set_mm(), when mm->tx_enabled transitions from true to false, because an IRQ is also expected in that case. Also, a port may have its MAC Merge layer enabled but it may not have generated the interrupt. In that case, there's no point in writing to DEV_MM_STATUS to acknowledge that IRQ. We can reduce the number of register writes per port with MM enabled by keeping an "ack" variable which writes the "write-one-to-clear" bits. Those are 3 in number: PRMPT_ACTIVE_STICKY, UNEXP_RX_PFRM_STICKY and UNEXP_TX_PFRM_STICKY. The other fields in DEV_MM_STATUS are read-only and it doesn't matter what is written to them, so writing zero is just fine. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
3ff468ef98 |
net: mscc: ocelot: remove struct ocelot_mm_state :: lock
Unfortunately, the workarounds for the hardware bugs make it pointless to keep fine-grained locking for the MAC Merge state of each port. Our vsc9959_cut_through_fwd() implementation requires ocelot->fwd_domain_lock to be held, in order to serialize with changes to the bridging domains and to port speed changes (which affect which ports can be cut-through). Simultaneously, the traffic classes which can be cut-through cannot be preemptible at the same time, and this will depend on the MAC Merge layer state (which changes from threaded interrupt context). Since vsc9959_cut_through_fwd() would have to hold the mm->lock of all ports for a correct and race-free implementation with respect to ocelot_mm_irq(), in practice it means that any time a port's mm->lock is held, it would potentially block holders of ocelot->fwd_domain_lock. In the interest of simple locking rules, make all MAC Merge layer state changes (and preemptible traffic class changes) be serialized by the ocelot->fwd_domain_lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
15f93f46f3 |
net: mscc: ocelot: export a single ocelot_mm_irq()
When the switch emits an IRQ, we don't know what caused it, and we iterate through all ports to check the MAC Merge status. Move that iteration inside the ocelot lib; we will change the locking in a future change and it would be good to encapsulate that lock completely within the ocelot lib. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
9ecd05794b |
net: mscc: ocelot: strengthen type of "u32 reg" in I/O accessors
The "u32 reg" argument that is passed to these functions is not a plain address, but rather a driver-specific encoding of another enum ocelot_target target in the upper bits, and an index into the u32 ocelot->map[target][] array in the lower bits. That encoded value takes the type "enum ocelot_reg" and is what is passed to these I/O functions, so let's actually use that to prevent type confusion. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Stephen Boyd
|
d1aae06630 |
clk: starfive: Avoid casting iomem pointers
Let's use a wrapper struct for the auxiliary_device made in
jh7110_reset_controller_register() so that we can stop casting iomem
pointers. The casts trip up tools like sparse, and make for some awkward
casts that are largely unnecessary. While we're here, change the
allocation from devm and actually free the auxiliary_device memory in
the release function. This avoids any use after free problems where the
parent device driver is unbound from the device but the
auxiliuary_device is still in use accessing devm freed memory.
Cc: Tommaso Merciai <tomm.merciai@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Hal Feng <hal.feng@starfivetech.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes:
|
||
Abel Vesa
|
2afbf43a4a |
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
This takes the already existing duplicated support in both ufs-qcom and sdhci-msm drivers and makes it a dedicated driver that can be used by both mentioned drivers. The reason for this is because, staring with SM8550, the ICE IP block is shared between UFS and SDCC, which means we need to probe a dedicated device and share it between those two consumers. So let's add the ICE dedicated driver as a soc driver. Platforms that already have ICE supported, will use it as a library as the of_qcom_ice_get will return an ICE instance created for the consumer device. This allows the backwards compatibility with old-style devicetree approach. Also, add support to HW version 4.x since it works out-of-the-box with the current driver. The 4.x HW version is found on SM8550 platform. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407105029.2274111-4-abel.vesa@linaro.org |
||
Colin Foster
|
dfca93ed51 |
net: mscc: ocelot: expose serdes configuration function
During chip initialization, ports that use SGMII / QSGMII to interface to external phys need to be configured on the VSC7513 and VSC7514. Expose this configuration routine, so it can be used by DSA drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Colin Foster
|
69f7f89c0d |
net: mscc: ocelot: expose generic phylink_mac_config routine
The ocelot-switch driver can utilize the phylink_mac_config routine. Move this to the ocelot library location and export the symbol to make this possible. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Colin Foster
|
fec53f4494 |
net: mscc: ocelot: expose ocelot_pll5_init routine
Ocelot chips have an internal PLL that must be used when communicating through external phys. Expose the init routine, so it can be used by other drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Herve Codina
|
3178d58e0b
|
soc: fsl: cpm1: Add support for QMC
The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one serial controller using the same TDM physical interface routed from the TSA. It is available in some PowerQUICC SoC such as the MPC885 or MPC866. It is also available on some Quicc Engine SoCs. This current version support CPM1 SoCs only and some enhancement are needed to support Quicc Engine SoCs. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Acked-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20230217145645.1768659-7-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> |