IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There's a lot of inconsistent spacing and indentation in our register
definitions. Let's clean things up a bit and follow some consistent
rules:
* "#define" always starts in column 0
* There's exactly one space between '#define' and the name of a
register.
* There's exactly three spaces between '#define' and the name of a
bit/bitfield.
* Tabs (no spaces) are used between a definition name and its value;
the value starts on column 48 unless the name is too long, in which
case a single tab is used.
Final diff for this patch is empty if whitespace is ignored:
$ git diff -w
$
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-5-matthew.d.roper@intel.com
These SFC registers were defined in an unusual way, taking an engine as
a parameter rather than an engine MMIO base offset. Let's adjust them
to match the style used by other per-engine registers and move them to
intel_engine_regs.h.
While doing this move, we can drop GEN12_HCP_SFC_FORCED_LOCK completely;
it was intended for use in an early version of a hardware workaround,
but was no longer necessary by the time the workaround was finalized.
It is not used anywhere in the driver.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-3-matthew.d.roper@intel.com
Due to some mistaken merge conflict resolution, we wound up with a copy
of VDBOX_CGCTL3F18 in both intel_engine_regs.h and intel_gt_regs.h.
Since this is a per-engine register, referenced relative to an engine's
base offset, drop the copy from intel_gt_regs.h
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-2-matthew.d.roper@intel.com
intel_sagv_{pre,post}_plane_update() can accidentally forget
to bail out early on pre-icl and proceed down the icl+ codepath
at the end of the function. Fortunately it'll bail out before
it gets too far due to old_qgv_mask==new_qgv_mask==0 so no real
bug here. But lets make the code less confusing anyway.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
adlp+ adds some extra bits to the QGV point mask. The code attempts
to handle that but forgot to actually make sure we can store those
bits in the bw state. Fix it.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Use the {active,scaled}_planes bitmasks from the crtc state
rather than poking at the plane state directly. One step
towards eliminating the last use of the somewhat questionble
intel_atomic_crtc_state_for_each_plane_state() macro which
peeks into the plane state without actually holding the plane
mutex.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211090629.15555-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Exfiltrate intel_plane_atomic_calc_changes() and its friends from
intel_display.c to intel_atomic_plane.c since that is a much better
fit.
While at it also nuke the official looking kernel docs for
intel_wm_need_update() and flag it for eventual destruction so
that people don't get any wrong ideas about using it in new code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211090629.15555-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.
It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.
Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Often using pipes is more convenient than crtc indices.
Convert the current for_each_intel_crtc_mask() to take a
pipe mask instead of a crtc index mask, and rename it to
for_each_intel_crtc_in_pipe_mask() to make it clear what
it does.
The current users of for_each_intel_crtc_mask() don't really
care which kind of mask we use, but for other uses a pipe
mask if better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-8-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Current DMC_DEBUG3(_MMIO(0x101090)) address is for TGL,
it is wrong for DG1. Just like commit 5bcc95ca382e
("drm/i915/dg1: Update DMC_DEBUG register"), correct
this issue for DG1 platform to avoid wrong register
being read.
BSpec: 49788
v2: fix "not wrong" typo. (Jani)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211002933.84240-1-chuansheng.liu@intel.com
It's fairly difficult to ensure these are actually not needed due to
indirect includes via other files. However, it's easier to add them back
as needed and, most importantly, where needed instead of exhaustively
proving they're unnecessary.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc2bbcd46b66e44e98e1ef76980dfabcfac700d5.1644507885.git.jani.nikula@intel.com
Include drm_fourcc.h, drm_plane.h, and drm_color_mgmt.h where needed, so
we can drop the includes for drm_atomic.h and drm_fourcc.h from
i915_drv.h, reducing the build dependencies.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b03711b2286396b2e9d5822f6adef4e7a6dc0f7b.1644507885.git.jani.nikula@intel.com
Currently the bigjoiner state copy logic is kind of
a byzantine mess.
Clean it up to operate in the following manner during a full
modeset:
1) master uapi -> hw state copy
2) master hw -> slave hw state copy
And during a non-modeset update we do:
1) master uapi -> hw state light copy
2) master hw -> slave hw state light copy
I think that is now easier to reason about since we never do
any kind of master uapi -> slave hw state copy short circuit
that could happen previously.
Obviously this does now depend on the master uapi->hw copy
always happening before the master hw -> slave hw copy, but
that is guaranteed by the fact that we always add both crtcs
to the state early, the crtcs are registered in pipe
order (so the compute_config loop happens in pipe order),
and the hardware requires the master pipe has to be lower
than the slave pipe as well. And for good measure we shall
add a check+WARN for this before doing the bigjoiner crtc
assignment.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072049.1610-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
There's some weird junk in intel_atomic_check_bigjoiner()
that's trying to look at the old crtc state's bigjoiner
usage for some reason. That code is totally unnecessary,
and maybe even actively harmful. Not entirely sure which
since it's such a mess that I can't actually wrap my brain
around what it ends up doing.
Either way, thanks to intel_bigjoiner_add_affected_crtcs()
all of the old bigjoiner crtcs are guaranteed to be in the
state already if any one of them is in the state. Also if
any one of those crtcs got flagged for a modeset, then all
of them will have been flagged, and the bigjoiner links
will have been detached via kill_bigjoiner_slave().
So there is no need to look examing any old bigjoiner
usage in intel_atomic_check_bigjoiner(). All we have to care
about is whether bigjoiner is needed for the new state,
and whether we can get the slave crtc we need.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
We seem to be missing a few things from the bigjoiner state copy.
Namely hw.mode isn't getting copied (which probably causes PIPESRC
to be misconfigured), CTM/LUTs aren't getting copied (which could
cause the pipe to produced incorrect output), and we also forgot
to copy over the color_mgmt_changed flag so potentially we fail
to do the actual CTM/LUT programming (assuming we aren't doing
a full modeset or fastset). Fix it all.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072009.1546-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
The core doesn't flag scaling_filter prop changes as needing
a modeset. That doesn't work for us since we only reprogram the
pipe scaler during full modesets and fastsets. So we need to
flag the prop change as a modeset ourselves. Assuming nothing else
has changed the operation will get promoted (demoted?) to a fastset
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Just loop over the possible bpc values instead of
using an ugly if construct.
A slight change in behaviour is that we now call
intel_hdmi_{source,sink}_bpc_possible() even for 8bpc,
but that is fine since 8bpc is always supported.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-8-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
We are currently computing the relative data rates as
src_size * scale_factor where scale_factor is src_size / dst_size.
Thus relative data rate is src_size * src_size / dst_size,
which is just utter nonsense. What we really seem to want is
just a reasonable estimate on how much data will be fetched
which is just src_size. So let's do that instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118092354.11631-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
commit c50df701d49e ("drm/i915: Enable rpm wakeref tracking
whether runtime pm is enabled or not") enabled wakeref tracking
even for the mock device. Turns out that has somewhat significant
overhead, and on the glacial Core m3's we have in CI the vma
selftests are now exceeding the allotted time budget.
So let's disable the wakeref tracking once again for the mock
device in order to avoid blowing up the selftest runtime.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204171053.18409-1-ville.syrjala@linux.intel.com
128b/132b supports using 64 slots starting from 0, while 8b/10b reserves
slot 0 for metadata.
Commit d6c6a76f80a1 ("drm: Update MST First Link Slot Information Based
on Encoding Format") added support for updating the topology state
accordingly, and commit 41724ea273cd ("drm/amd/display: Add DP 2.0 MST
DM Support") started using it in the amd driver.
This feels more than a little cumbersome, especially updating the
information in atomic check. For i915, add the update to MST connector
.compute_config hook rather than iterating over all MST managers and
connectors in global mode config .atomic_check. Fingers crossed.
v3:
- Propagate errors from intel_dp_mst_update_slots() (Ville)
v2:
- Update in .compute_config() not .atomic_check (Ville)
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220208152317.3019070-1-jani.nikula@intel.com
The DP 2.0 errata completely overhauls the 128b/132b link training, with
no provisions for backward compatibility with the original DP 2.0
specification.
The changes are too intrusive to consider reusing the same code for both
8b/10b and 128b/132b, mainly because the LTTPR channel equalisation is
done concurrently instead of serialized.
NOTES:
* It's a bit unclear when to wait for DP_INTERLANE_ALIGN_DONE and
per-lane DP_LANE_SYMBOL_LOCKED. Figure xx4 in the SCR implies the
LANEx_CHANNEL_EQ_DONE sequence may end with either 0x77,0x77,0x85 *or*
0x33,0x33,0x84 (for four lane configuration in DPCD 0x202..0x204)
i.e. without the above bits set. Text elsewhere seems contradictory or
incomplete.
* We read entire link status (6 bytes) everywhere instead of individual
DPCD addresses.
* There are some subtle ambiguities or contradictions in the order of
some DPCD access and TPS signal enables/disables. It's also not clear
whether these are significant.
v4:
- Wait for intra-hop clear after link training end (Ville)
- Wait instead of single check for intra-hop clear before link train
v3:
- Use msecs_to_jiffies_timeout() (Ville)
- Read status at the beginning of interlane align done loop (Ville)
- Try to simplify timeout flag use where possible (Ville)
v2:
- Always try one last time after timeouts to avoid races (Ville)
- Extend timeout to cover the entire LANEx_EQ_DONE sequence (Ville)
- Also check for eq interlane align done in LANEx_CDS_DONE Sequence (Ville)
- Check for Intra-hop status before link training
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220208143209.2997337-1-jani.nikula@intel.com
The DP 2.0 errata redefines link training. There are some new status
bits, and some of the old ones need to be checked independently. Add
helpers to do this.
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/5a46260d1f171fed46d0ab8fe4b6499abd65ce24.1643878928.git.jani.nikula@intel.com
The DP 2.0 errata changes DP_128B132B_TRAINING_AUX_RD_INTERVAL (DPCD
0x2216) completely. Add a new function to read that. Follow-up will need
to clean up existing functions.
v2: fix reversed interpretation of bit 7 meaning (Uma)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/22f6637194c9edb22b6a84be82dd385550dbb958.1643878928.git.jani.nikula@intel.com
