IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's been invariant since
commit ccbc1b97948ab671335e950271e39766729736c3
Author: Jason Ekstrand <jason@jlekstrand.net>
Date: Thu Jul 8 10:48:30 2021 -0500
drm/i915/gem: Don't allow changing the VM on running contexts (v4)
this just completes the deed. I've tried to split out prep work for
more careful review as much as possible, this is what's left:
- get_ppgtt gets simplified since we don't need to grab a temporary
reference - we can rely on the temporary reference for the gem_ctx
while we inspect the vm. The new vm_id still needs a full
i915_vm_open ofc. This also removes the final caller of context_get_vm_rcu
- A pile of selftests can now just look at ctx->vm instead of
rcu_dereference_protected( , true) or similar things.
- All callers of i915_gem_context_vm also disappear.
- I've changed the hugepage selftest to set scrub_64K without any
locking, because when we inspect that setting we're also not taking
any locks either. It works because it's a selftests that's careful
(single threaded gives you nice ordering) and not a live driver
where races can happen from anywhere.
These can only be split up further if we have some intermediate state
with a bunch more rcu_dereference_protected(ctx->vm, true), just to
shut up lockdep and sparse.
The conversion to __rcu happened in
commit a4e7ccdac38ec8335d9e4e2656c1a041c77feae1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 4 14:40:09 2019 +0100
drm/i915: Move context management under GEM
Note that we're not breaking the actual bugfix in there: The real
bugfix is pushing the i915_vm_relase onto a separate worker, to avoid
locking inversion issues. The rcu conversion was just thrown in for
entertainment value on top (no vm lookup isn't even close to anything
that's a hotpath where removing the single spinlock can be measured).
v2: Rebase over the change to move the i915_vm_put() into
i915_gem_context_release().
v3: Trivial conflict against repainted shed.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-9-daniel.vetter@ffwll.ch
And use it anywhere we have open-coded checks for ctx->vm that really
only check for full ppgtt.
Plus for paranoia add a GEM_BUG_ON that checks it's really only set
when we have full ppgtt, just in case. gem_context->vm is different
since it's NULL in ggtt mode, unlike intel_context->vm or gt->vm,
which is always set.
v2: 0day found a testcase that I missed.
v3: Repaint shed (Jon, Tvrtko)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-7-daniel.vetter@ffwll.ch
The important part isn't so much that this does an rcu lookup - that's
more an implementation detail, which will also be removed.
The thing that makes this different from other functions is that it's
gettting you the vm that batchbuffers will run in for that gem
context, which is either a full ppgtt stored in gem->ctx, or the ggtt.
We'll make more use of this function later on.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-5-daniel.vetter@ffwll.ch
Like in the case of several other selftests, generating lots of requests
in a loop takes a bit longer with GuC submission. Increase a timeout in
i915_gem_contexts selftest to take this into account.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727031703.40395-2-matthew.brost@intel.com
We want to delete __assign_ppgtt and, generally, stop setting the VM
after context creation. This is the one place I could find in the
selftests where we set a VM after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-29-jason@jlekstrand.net
This better models where we want to go with contexts in general where
things like the VM and engine set are create parameters instead of being
set after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-28-jason@jlekstrand.net
When the APIs were added to manage VMs more directly from userspace, the
questionable choice was made to allow changing out the VM on a context
at any time. This is horribly racy and there's absolutely no reason why
any userspace would want to do this outside of testing that exact race.
By removing support for CONTEXT_PARAM_VM from ctx_setparam, we make it
impossible to change out the VM after the context has been fully
created. This lets us delete a bunch of deferred task code as well as a
duplicated (and slightly different) copy of the code which programs the
PPGTT registers.
v2 (Jason Ekstrand):
- Expand the commit message
v3 (Daniel Vetter):
- Don't drop the __rcu on the vm pointer
v4 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_VM returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-26-jason@jlekstrand.net
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-4-lucas.demarchi@intel.com
We need to generalise our accessor for the page directories and tables from
using the simple kmap_atomic to support local memory, and this setup
must be done on acquisition of the backing storage prior to entering
fence execution contexts. Here we replace the kmap with the object
mapping code that for simple single page shmemfs object will return a
plain kmap, that is then kept for the lifetime of the page directory.
Note that keeping the mapping around is a potential concern here, since
while the vma is pinned the mapping remains there for the PDs
underneath, or at least until the used_count reaches zero, at which
point we can safely destroy the mapping. For 32b this will be even worse
since the address space is more limited, but since this change mostly
impacts full ppGTT platforms, the justification is that for modern
platforms we shouldn't care too much about 32b.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-3-matthew.auld@intel.com
Just some prep work before we rework the lifetime handling, which
requires replacing all the drm_dev_put in selftests by something else.
v2: Don't go with a static inline, upsets the header tests and
separation.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-2-daniel.vetter@ffwll.ch
Make sure vma_lock is not used as inner lock when kernel context is used,
and add ww handling where appropriate.
Ensure that execbuf selftests keep passing by using ww handling.
Changes since v2:
- Fix i915_gem_context finally.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-22-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Execbuffer submission will perform its own WW locking, and we
cannot rely on the implicit lock there.
This also makes it clear that the GVT code will get a lockdep splat when
multiple batchbuffer shadows need to be performed in the same instance,
fix that up.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-7-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
i915_gem_ww_ctx is used to lock all gem bo's for pinning and memory
eviction. We don't use it yet, but lets start adding the definition
first.
To use it, we have to pass a non-NULL ww to gem_object_lock, and don't
unlock directly. It is done in i915_gem_ww_ctx_fini.
Changes since v1:
- Change ww_ctx and obj order in locking functions (Jonas Lahtinen)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-6-maarten.lankhorst@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The GEM object is grossly overweight for the practicality of tracking
large numbers of individual pages, yet it is currently our only
abstraction for tracking DMA allocations. Since those allocations need
to be reserved upfront before an operation, and that we need to break
away from simple system memory, we need to ditch using plain struct page
wrappers.
In the process, we drop the WC mapping as we ended up clflushing
everything anyway due to various issues across a wider range of
platforms. Though in a future step, we need to drop the kmap_atomic
approach which suggests we need to pre-map all the pages and keep them
mapped.
v2: Verify our large scratch page is suitably DMA aligned; and manually
clear the scratch since we are allocating plain struct pages full of
prior content.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729164219.5737-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
SSEUs are a GT capability, so track them under gt_info.
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-8-daniele.ceraolospurio@intel.com
Be consistent and ensure that we always emit the asynchronous waits
prior to issuing instructions that use the address. This ensures that if
we do emit GPU commands to do the await, they are before our use!
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200510102431.21959-1-chris@chris-wilson.co.uk
The history of i915_vma_close() is confusing, as is its use. As the
lifetime of the i915_vma is currently bounded by the object it is
attached to, we needed a means of identify when a vma was no longer in
use by userspace (via the user's fd). This is further complicated by
that only ppgtt vma should be closed at the user's behest, as the ggtt
were always shared.
Now that we attach the vma to a lut on the user's context, the open
count does indicate how many unique and open context/vm are referencing
this vma from the user. As such, we can and should just use the
open_count to track when the vma is still in use by userspace.
It's a poor man's replacement for reference counting.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1193
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422190558.30509-1-chris@chris-wilson.co.uk
We've migrated all the heavy users over to the intel_gt, and can finally
drop the last few users and with that the mirror in dev_priv->engine[].
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325234803.6175-1-chris@chris-wilson.co.uk
Trying to use i915_request_skip() prior to i915_request_add() causes us
to try and fill the ring upto request->postfix, which has not yet been
set, and so may cause us to memset() past the end of the ring.
Instead of skipping the request immediately, just flag the error on the
request (only accepting the first fatal error we see) and then clear the
request upon submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304121849.2448028-1-chris@chris-wilson.co.uk
Using a clear page for scratch means that we have relatively benign
errors in case it is accidentally used, but that can be rather too
benign for debugging. If we poison the scratch, ideally it quickly
results in an obvious error.
v2: Set each page individually just in case we are using highmem for our
scratch page.
v3: Pick a new scratch register as MI_STORE_REGISTER_MEM does not work
with GPR0 on gen7, unbelievably.
v4: Haswell still considers 3DPRIM a privileged register!
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124115133.53360-1-chris@chris-wilson.co.uk
Allocate only an internal intel_context for the kernel_context, forgoing
a global GEM context for internal use as we only require a separate
address space (for our own protection).
Now having weaned GT from requiring ce->gem_context, we can stop
referencing it entirely. This also means we no longer have to create random
and unnecessary GEM contexts for internal use.
GEM contexts are now entirely for tracking GEM clients, and intel_context
the execution environment on the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191221160324.1073045-1-chris@chris-wilson.co.uk
As the engine->kernel_context is used within the engine-pm barrier, we
have to be careful when emitting requests outside of the barrier, as the
strict timeline locking rules do not apply. Instead, we must ensure the
engine_park() cannot be entered as we build the request, which is
simplest by taking an explicit engine-pm wakeref around the request
construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-1-chris@chris-wilson.co.uk
Use our more regular igt_flush_test() to bind the wait-for-idle and
error out instead of waiting around forever on critical failure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121233021.507400-1-chris@chris-wilson.co.uk
i915_request_add() consumes the passed in reference to the i915_request,
so if the selftest caller wishes to wait upon it afterwards, it needs to
take a reference for itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120102741.3734346-1-chris@chris-wilson.co.uk
In the selftests, where we are accessing a private ctx from within the
confines of a single test, we know that the ctx->vm pointer is static
and bounded by the lifetime of the test. We can use a simple helper to
provide the RCU annotations to keep sparse happy.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107221201.30497-1-chris@chris-wilson.co.uk
Since drm provided us with a real struct file we can use for our
anonymous internal clients (mock_file), complete our transition to using
that as the primary interface (and not the mocked up struct drm_file we
previous were using).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107213929.23286-1-chris@chris-wilson.co.uk
As drm now exports a method to create an anonymous struct file around a
drm_device for internal use, make use of it to avoid our horrible hacks.
Danial suggested that the mock_file_put() wrapper was suitable for
drm-core, along with the mock_drm_getfile() [and that the vestigal
mock_drm_file() in this patch should perhaps be the drm interface
itself]. However, the eventual goal is to remove the mock_drm_file() and
use the struct file and fput() directly, in this patch we take a simple
transition in that direction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-3-chris@chris-wilson.co.uk
An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() before the
kthreads were spawned. If this happens, the kthread is never run at all;
completely bypassing the test.
A simple yield() from the parent will ensure that all children have the
opportunity to start before we reap them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101084940.31838-1-chris@chris-wilson.co.uk
Keep smatch quiet,
drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1268 __igt_ctx_sseu() error: uninitialized symbol 'ret'.
drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1280 __igt_ctx_sseu() error: uninitialized symbol 'ret'.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028142652.1987-1-chris@chris-wilson.co.uk
The parallel switch test has an underlying assumption that its requests
are executed in order of submission, which is only true if the backend
manages to keep up. Ensure the order of execution matches the submission
order by explicit dependencies and so when we wait on the last request,
we know we wait on completion of the entire queue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016225730.29447-1-chris@chris-wilson.co.uk
In the case where data fails to be allocated the error exit path is
via label 'out' where data is dereferenced in a for-loop. Fix this
by exiting via the label 'out_file' instead to avoid the null pointer
dereference.
Addresses-Coverity: ("Dereference after null check")
Fixes: 50d16d44cce4 ("drm/i915/selftests: Exercise context switching in parallel")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009100024.23077-1-colin.king@canonical.com
Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.
v2: Focus on lock tracking; ctx->vm is protected by ctx->mutex
v3: Correct split with removal of logical HW ID
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-15-chris@chris-wilson.co.uk
With the introduction of ctx->engines[] we allow multiple logical
contexts to be used on the same engine (e.g. with virtual engines).
According to bspec, aach logical context requires a unique tag in order
for context-switching to occur correctly between them. [Simple
experiments show that it is not so easy to trick the HW into performing
a lite-restore with matching logical IDs, though my memory from early
Broadwell experiments do suggest that it should be generating
lite-restores.]
We only need to keep a unique tag for the active lifetime of the
context, and for as long as we need to identify that context. The HW
uses the tag to determine if it should use a lite-restore (why not the
LRCA?) and passes the tag back for various status identifies. The only
status we need to track is for OA, so when using perf, we assign the
specific context a unique tag.
v2: Calculate required number of tags to fill ELSP.
Fixes: 976b55f0e1db ("drm/i915: Allow a context to define its set of engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111895
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-14-chris@chris-wilson.co.uk
wait_for_timelines is essentially the same loop as retiring requests
(with an extra timeout), so merge the two into one routine.
v2: i915_retire_requests_timeout and keep VT'd w/a as !interruptible
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-10-chris@chris-wilson.co.uk
We don't need to hold struct_mutex now for retiring requests, so drop it
from i915_retire_requests() and i915_gem_wait_for_idle(), finally
removing I915_WAIT_LOCKED for good.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-8-chris@chris-wilson.co.uk
Replace the struct_mutex requirement for pinning the i915_vma with the
local vm->mutex instead. Note that the vm->mutex is tainted by the
shrinker (we require unbinding from inside fs-reclaim) and so we cannot
allocate while holding that mutex. Instead we have to preallocate
workers to do allocate and apply the PTE updates after we have we
reserved their slot in the drm_mm (using fences to order the PTE writes
with the GPU work and with later unbind).
In adding the asynchronous vma binding, one subtle requirement is to
avoid coupling the binding fence into the backing object->resv. That is
the asynchronous binding only applies to the vma timeline itself and not
to the pages as that is a more global timeline (the binding of one vma
does not need to be ordered with another vma, nor does the implicit GEM
fencing depend on a vma, only on writes to the backing store). Keeping
the vma binding distinct from the backing store timelines is verified by
a number of async gem_exec_fence and gem_exec_schedule tests. The way we
do this is quite simple, we keep the fence for the vma binding separate
and only wait on it as required, and never add it to the obj->resv
itself.
Another consequence in reducing the locking around the vma is the
destruction of the vma is no longer globally serialised by struct_mutex.
A natural solution would be to add a kref to i915_vma, but that requires
decoupling the reference cycles, possibly by introducing a new
i915_mm_pages object that is own by both obj->mm and vma->pages.
However, we have not taken that route due to the overshadowing lmem/ttm
discussions, and instead play a series of complicated games with
trylocks to (hopefully) ensure that only one destruction path is called!
v2: Add some commentary, and some helpers to reduce patch churn.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-4-chris@chris-wilson.co.uk
We currently test context switching on each engine as a basic stress
test (just verifying that nothing explodes if we execute 2 requests from
different contexts sequentially). What we have not tested is what
happens if we try and do so on all available engines simultaneously,
putting our SW and the HW under the maximal stress.
v2: Clone the set of engines from the first context into the secondary
contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930144919.27992-1-chris@chris-wilson.co.uk
igt_ctx_exec allocates a new context for each iteration, keeping them
all allocated until the end. Instead, release the local ctx reference at
the end of each iteration, allowing ourselves to reap those if under
mempressure.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827161726.3640-2-chris@chris-wilson.co.uk
Upon object creation for live_gem_contexts, we fill the object with
known scratch and flush it out of the CPU cache. Before performing the
GPU fill, we don't need to flush it again and so avoid serialising with
previous fills.
However, we do need some throttling on the internal interfaces if we do
not want to run out of memory!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827161726.3640-1-chris@chris-wilson.co.uk
