IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209103531.469809-1-brgl@bgdev.pl
The interconnect property is already present in the qce node, which
is the consumer of the cryptobam, so no need for an interconnect property
as documented by the bindings.
Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Suggested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209-topic-sm8550-upstream-cryptobam-remove-interconnect-v1-1-84587c7bad0f@linaro.org
Tune the PWM to solve screen flashing issue and high frequency noise.
While at it, the comment for the PWM settings incorrectly said we were
using a 5kHz duty cycle. It should have said "period", not "duty cycle".
Correct this while updating the values.
Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213105803.v2.1.I610cef0ead2d5df1f7bd18bc0e0ae040b03725d0@changeid
Nodes like pwrkey, resin, iadc, adc-tm, temp-alarm which are the grand
children of spmi_bus node represent the interrupt generating devices but
don't have "interrupt-parent" property.
As per the devicetree spec v0.3, section 2.4:
"The physical wiring of an interrupt source to an interrupt controller is
represented in the devicetree with the interrupt-parent property. Nodes
that represent interrupt-generating devices contain an interrupt-parent
property which has a phandle value that points to the device to which the
device’s interrupts are routed, typically an interrupt controller. If an
interrupt-generating device does not have an interrupt-parent property,
its interrupt parent is assumed to be its devicetree parent."
This clearly says that if the "interrupt-parent" property is absent, then
the immediate devicetree parent will be assumed as the interrupt parent.
But the immediate parents of these nodes are not interrupt controllers
themselves.
This may lead to failure while wiring the interrupt for these nodes by an
operating system. But a few operating systems like Linux, workaround this
issue by walking up the parent nodes until it finds the "interrupt-cells"
property. Then the node that has the "interrupt-cells" property will be
used as the interrupt parent.
But this workaround is not as per the DT spec and is not being implemented
by other operating systems such as OpenBSD.
Hence, fix this issue by adding the "interrupts-extended" property that
explicitly specifies the spmi_bus node as the interrupt parent. Note that
the "interrupts-extended" property is chosen over "interrupt-parent" as it
allows specifying both interrupt parent phandle and interrupt specifiers in
a single property.
Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213090118.11527-1-manivannan.sadhasivam@linaro.org
Enable all i2c busses where something is connected on this phone. Add
comments as placeholders for which components are still missing.
Also enable gpi_dma and the other qupv3 for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-2-1c459c572f80@fairphone.com
Currently the dts contains a mix of status-as-first-property (old qcom
style) and status-as-last-property (new style).
Move all status properties down to the bottom once and for all so that
the style is consistent between different nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-1-1c459c572f80@fairphone.com
A special compatible was introduced for PMK8350 both in the driver and
the bindings to facilitate for 2 base registers (PBS & HLOS). Use it.
Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213212930.2115182-1-konrad.dybcio@linaro.org
The QCOM_PMIC_GLINK implements the parts of a TCPM necessary for
negotiating DP altmode and the TYPEC_MUX_GPIO_SBU driver is used for
controlling connection and orientation switching of the SBU lanes in the
USB-C connector Enable these to enable USB Type-C DisplayPort on
SC8280XP laptops.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-5-quic_bjorande@quicinc.com
Like on the CRD, add the necessary nodes to enable USB Type-C
altmode-based external display on the Lenovo ThinkPad X13s.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-4-quic_bjorande@quicinc.com
The SC8280XP CRD control over battery management and its two USB Type-C
port using pmic_glink and two GPIO-based SBU muxes.
Enable the two DisplayPort instances, GPIO SBU mux instance and
pmic_glink with the two connectors on the CRD.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-3-quic_bjorande@quicinc.com
Add the two DisplayPort controllers that are attached to QMP phys for
providing display output on USB Type-C.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-2-quic_bjorande@quicinc.com
Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
the GPU to function properly.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-7-dmitry.baryshkov@linaro.org
Continue ordering DT nodes by their address. Move RNG, UFS, system NoC
and SLPI nodes to the proper position.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-4-dmitry.baryshkov@linaro.org
Somehow sm8350 got its device nodes not fully sorted. Start reordering
DT nodes by their address. Move apps SMMU, GIC, timer, apps RSC, cpufreq
ADSP and cDSP nodes to the end to the proper position at the end of
/soc/.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-3-dmitry.baryshkov@linaro.org
Provide a slimline configuration intended to be booted on virtual
machines, with the goal of providing a light configuration which will
boot on and enable features available in mach-virt. This is defined in
terms of the standard defconfig, with an additional virt.config fragment
which disables options unneeded in a virtual configuration.
As a first step we just disable all the ARCH_ configuration options,
disabling the build of all the SoC specific drivers. This results in a
kernel that builds about 25% faster in my testing, if this approach
works for people we can add further options.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-3-cd0694a05f13@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are two more defconfig updates for 6.3, enabling the SM8450 Display
clock controller driver, as well as the SDAM driver, a driver exposing
SRAM on newer Qualcomm PMICs to other devices.
-----BEGIN PGP SIGNATURE-----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=b8rp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QLZQ
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
More ARM64 defconfig updates for v6.3
Here are two more defconfig updates for 6.3, enabling the SM8450 Display
clock controller driver, as well as the SDAM driver, a driver exposing
SRAM on newer Qualcomm PMICs to other devices.
* tag 'qcom-arm64-defconfig-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
arm64: defconfig: enable the clock driver for Qualcomm SA8775P platforms
arm64: defconfig: enable Visionox VTDR6130 DSI Panel driver
arm64: defconfig: enable SM8550 DISPCC clock driver
arm64: defconfig: enable Qualcomm PCIe modem drivers
arm64: defconfig: Enable SC8280XP Display Clock Controller
arm64: defconfig: Enable GCC, TCSRCC, pinctrl and interconnect for SM8550
arm64: defconfig: enable crypto userspace API
arm64: defconfig: build SDM_LPASSCC_845 as a module
arm64: defconfig: enable camera on Thundercomm RB5 platform
arm64: defconfig: build PINCTRL_SM8250_LPASS_LPI as module
arm64: defconfig: Enable Qualcomm EUD
Link: https://lore.kernel.org/r/20230210181516.2021902-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
-----BEGIN PGP SIGNATURE-----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=wSbI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nzqV
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 6.3
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
arm64: dts: qcom: pmk8550: fix PON compatible
arm64: dts: qcom: sm8550: fix DSI controller compatible
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
arm64: dts: qcom: sm6115: Add smp2p nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm6350: Add camera clock controller
dt-bindings: clock: add QCOM SM6350 camera clock bindings
...
Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Avoid open-coding and just use the helper to encode the ID from the
sysreg table entry.
No functional change intended.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230211190742.49843-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
So far we were flushing almost the entire universe whenever a VM would
load/unload the SCTLR_EL1 and the two versions of that register had
different MMU enabled settings. This turned out to be so slow that it
prevented forward progress for a nested VM, because a scheduler timer
tick interrupt would always be pending when we reached the nested VM.
To avoid this problem, we consider the SCTLR_EL2 when evaluating if
caches are on or off when entering virtual EL2 (because this is the
value that we end up shadowing onto the hardware EL1 register).
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-19-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As there is a number of features that we either can't support,
or don't want to support right away with NV, let's add some
basic filtering so that we don't advertize silly things to the
EL2 guest.
Whilst we are at it, advertize FEAT_TTL as well as FEAT_GTG, which
the NV implementation will implement.
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-18-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
With HCR_EL2.NV bit set, accesses to EL12 registers in the virtual EL2
trap to EL2. Handle those traps just like we do for EL1 registers.
One exception is CNTKCTL_EL12. We don't trap on CNTKCTL_EL1 for non-VHE
virtual EL2 because we don't have to. However, accessing CNTKCTL_EL12
will trap since it's one of the EL12 registers controlled by HCR_EL2.NV
bit. Therefore, add a handler for it and don't treat it as a
non-trap-registers when preparing a shadow context.
These registers, being only a view on their EL1 counterpart, are
permanently hidden from userspace.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
[maz: EL12_REG(), register visibility]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-17-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
So far, we never needed to distinguish between registers hidden
from userspace and being hidden from a guest (they are always
either visible to both, or hidden from both).
With NV, we have the ugly case of the EL02 and EL12 registers,
which are only a view on the EL0 and EL1 registers. It makes
absolutely no sense to expose them to userspace, since it
already has the canonical view.
Add a new visibility flag (REG_HIDDEN_USER) and a new helper that
checks for it and REG_HIDDEN when checking whether to expose
a sysreg to userspace. Subsequent patches will make use of it.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-16-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We can no longer blindly copy the VCPU's PSTATE into SPSR_EL2 and return
to the guest and vice versa when taking an exception to the hypervisor,
because we emulate virtual EL2 in EL1 and therefore have to translate
the mode field from EL2 to EL1 and vice versa.
This requires keeping track of the state we enter the guest, for which
we transiently use a dedicated flag.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
For the same reason we trap virtual memory register accesses at virtual
EL2, we need to trap SPSR_EL1, ELR_EL1 and VBAR_EL1 accesses. ARM v8.3
introduces the HCR_EL2.NV1 bit to be able to trap on those register
accesses in EL1. Do not set this bit until the whole nesting support is
completed, which happens further down the line...
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Non-nested guests have used the hvc instruction to initiate SMCCC
calls into KVM. This is quite a poor fit for NV as hvc exceptions are
always taken to EL2. In other words, KVM needs to unconditionally
forward the hvc exception back into vEL2 to uphold the architecture.
Instead, treat the smc instruction from vEL2 as we would a guest
hypercall, thereby allowing the vEL2 to interact with KVM's hypercall
surface. Note that on NV-capable hardware HCR_EL2.TSC causes smc
instructions executed in non-secure EL1 to trap to EL2, even if EL3 is
not implemented.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-13-maz@kernel.org
[Oliver: redo commit message, only handle smc from vEL2]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When a guest hypervisor running virtual EL2 in EL1 executes an ERET
instruction, we will have set HCR_EL2.NV which traps ERET to EL2, so
that we can emulate the exception return in software.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As we expect all PSCI calls from the L1 hypervisor to be performed
using SMC when nested virtualization is enabled, it is clear that
all HVC instruction from the VM (including from the virtual EL2)
are supposed to handled in the virtual EL2.
Forward these to EL2 as required.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
[maz: add handling of HCR_EL2.HCD]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Support injecting exceptions and performing exception returns to and
from virtual EL2. This must be done entirely in software except when
taking an exception from vEL0 to vEL2 when the virtual HCR_EL2.{E2H,TGE}
== {1,1} (a VHE guest hypervisor).
[maz: switch to common exception injection framework, illegal exeption
return handling]
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
ARM v8.3 introduces a new bit in the HCR_EL2, which is the NV bit. When
this bit is set, accessing EL2 registers in EL1 traps to EL2. In
addition, executing the following instructions in EL1 will trap to EL2:
tlbi, at, eret, and msr/mrs instructions to access SP_EL1. Most of the
instructions that trap to EL2 with the NV bit were undef at EL1 prior to
ARM v8.3. The only instruction that was not undef is eret.
This patch sets up a handler for EL2 registers and SP_EL1 register
accesses at EL1. The host hypervisor keeps those register values in
memory, and will emulate their behavior.
This patch doesn't set the NV bit yet. It will be set in a later patch
once nested virtualization support is completed.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
[maz: EL2_REG() macros]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When running a nested hypervisor we commonly have to figure out if
the VCPU mode is running in the context of a guest hypervisor or guest
guest, or just a normal guest.
Add convenient primitives for this.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add the minimal set of EL2 system registers to the vcpu context.
Nothing uses them just yet.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We were not allowing userspace to set a more privileged mode for the VCPU
than EL1, but we should allow this when nested virtualization is enabled
for the VCPU.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reset the VCPU with PSTATE.M = EL2h when the nested virtualization
feature is enabled on the VCPU.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: rework register reset not to use empty data structures]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Introduce the feature bit and a primitive that checks if the feature is
set behind a static key check based on the cpus_have_const_cap check.
Checking vcpu_has_nv() on systems without nested virt enabled
should have negligible overhead.
We don't yet allow userspace to actually set this feature.
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Most of our S2 helpers take a kvm_s2_mmu pointer, but quickly
revert back to using the kvm structure. By doing so, we lose
track of which S2 MMU context we were initially using, and fallback
to the "canonical" context.
If we were trying to unmap a S2 context managed by a guest hypervisor,
we end-up parsing the wrong set of page tables, and bad stuff happens
(as this is often happening on the back of a trapped TLBI from the
guest hypervisor).
Instead, make sure we always use the provided MMU context all the way.
This has no impact on non-NV, as we always pass the canonical MMU
context.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230209175820.1939006-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a new ARM64_HAS_NESTED_VIRT feature to indicate that the
CPU has the ARMv8.3 nested virtualization capability, together
with the 'kvm-arm.mode=nested' command line option.
This will be used to support nested virtualization in KVM.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: moved the command-line option to kvm-arm.mode]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* for-next/signal:
: Signal handling cleanups
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
* for-next/sysreg-hwcaps:
: Make use of sysreg helpers for hwcaps
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
arm64/sysreg: Allow enumerations to be declared as signed or unsigned
* arm64/for-next/perf:
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event
perf: arm_spe: Use new PMSIDR_EL1 register enums
perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors
arm64/sysreg: Convert SPE registers to automatic generation
arm64: Drop SYS_ from SPE register defines
perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines
perf/marvell: Add ACPI support to TAD uncore driver
perf/marvell: Add ACPI support to DDR uncore driver
perf/arm-cmn: Reset DTM_PMU_CONFIG at probe
drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu"
drivers/perf: hisi: Simplify the parameters of hisi_pmu_init()
drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability
* for-next/sysreg:
: arm64 sysreg and cpufeature fixes/updates
KVM: arm64: Use symbolic definition for ISR_EL1.A
arm64/sysreg: Add definition of ISR_EL1
arm64/sysreg: Add definition for ICC_NMIAR1_EL1
arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK()
arm64/sysreg: Fix errors in 32 bit enumeration values
arm64/cpufeature: Fix field sign for DIT hwcap detection
* for-next/sme:
: SME-related updates
arm64/sme: Optimise SME exit on syscall entry
arm64/sme: Don't use streaming mode to probe the maximum SME VL
arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support
* for-next/kselftest: (23 commits)
: arm64 kselftest fixes and improvements
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA
kselftest/arm64: Fix enumeration of systems without 128 bit SME
kselftest/arm64: Don't require FA64 for streaming SVE tests
kselftest/arm64: Limit the maximum VL we try to set via ptrace
kselftest/arm64: Correct buffer size for SME ZA storage
kselftest/arm64: Remove the local NUM_VL definition
kselftest/arm64: Verify simultaneous SSVE and ZA context generation
kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set
kselftest/arm64: Remove spurious comment from MTE test Makefile
kselftest/arm64: Support build of MTE tests with clang
kselftest/arm64: Initialise current at build time in signal tests
kselftest/arm64: Don't pass headers to the compiler as source
kselftest/arm64: Remove redundant _start labels from FP tests
kselftest/arm64: Fix .pushsection for strings in FP tests
kselftest/arm64: Run BTI selftests on systems without BTI
kselftest/arm64: Fix test numbering when skipping tests
kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress
kselftest/arm64: Only enumerate power of two VLs in syscall-abi
...
* for-next/misc:
: Miscellaneous arm64 updates
arm64/mm: Intercept pfn changes in set_pte_at()
Documentation: arm64: correct spelling
arm64: traps: attempt to dump all instructions
arm64: Apply dynamic shadow call stack patching in two passes
arm64: el2_setup.h: fix spelling typo in comments
arm64: Kconfig: fix spelling
arm64: cpufeature: Use kstrtobool() instead of strtobool()
arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path
arm64: make ARCH_FORCE_MAX_ORDER selectable
* for-next/sme2: (23 commits)
: Support for arm64 SME 2 and 2.1
arm64/sme: Fix __finalise_el2 SMEver check
kselftest/arm64: Remove redundant _start labels from zt-test
kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps
kselftest/arm64: Add coverage of the ZT ptrace regset
kselftest/arm64: Add SME2 coverage to syscall-abi
kselftest/arm64: Add test coverage for ZT register signal frames
kselftest/arm64: Teach the generic signal context validation about ZT
kselftest/arm64: Enumerate SME2 in the signal test utility code
kselftest/arm64: Cover ZT in the FP stress test
kselftest/arm64: Add a stress test program for ZT0
arm64/sme: Add hwcaps for SME 2 and 2.1 features
arm64/sme: Implement ZT0 ptrace support
arm64/sme: Implement signal handling for ZT
arm64/sme: Implement context switching for ZT0
arm64/sme: Provide storage for ZT0
arm64/sme: Add basic enumeration for SME2
arm64/sme: Enable host kernel to access ZT0
arm64/sme: Manually encode ZT0 load and store instructions
arm64/esr: Document ISS for ZT0 being disabled
arm64/sme: Document SME 2 and SME 2.1 ABI
...
* for-next/tpidr2:
: Include TPIDR2 in the signal context
kselftest/arm64: Add test case for TPIDR2 signal frame records
kselftest/arm64: Add TPIDR2 to the set of known signal context records
arm64/signal: Include TPIDR2 in the signal context
arm64/sme: Document ABI for TPIDR2 signal information
* for-next/scs:
: arm64: harden shadow call stack pointer handling
arm64: Stash shadow stack pointer in the task struct on interrupt
arm64: Always load shadow stack pointer directly from the task struct
* for-next/compat-hwcap:
: arm64: Expose compat ARMv8 AArch32 features (HWCAPs)
arm64: Add compat hwcap SSBS
arm64: Add compat hwcap SB
arm64: Add compat hwcap I8MM
arm64: Add compat hwcap ASIMDBF16
arm64: Add compat hwcap ASIMDFHM
arm64: Add compat hwcap ASIMDDP
arm64: Add compat hwcap FPHP and ASIMDHP
* for-next/ftrace:
: Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS
arm64: avoid executing padding bytes during kexec / hibernation
arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
arm64: ftrace: Update stale comment
arm64: patching: Add aarch64_insn_write_literal_u64()
arm64: insn: Add helpers for BTI
arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT
ACPI: Don't build ACPICA with '-Os'
Compiler attributes: GCC cold function alignment workarounds
ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS
* for-next/efi-boot-mmu-on:
: Permit arm64 EFI boot with MMU and caches on
arm64: kprobes: Drop ID map text from kprobes blacklist
arm64: head: Switch endianness before populating the ID map
efi: arm64: enter with MMU and caches enabled
arm64: head: Clean the ID map and the HYP text to the PoC if needed
arm64: head: avoid cache invalidation when entering with the MMU on
arm64: head: record the MMU state at primary entry
arm64: kernel: move identity map out of .text mapping
arm64: head: Move all finalise_el2 calls to after __enable_mmu
* for-next/ptrauth:
: arm64 pointer authentication cleanup
arm64: pauth: don't sign leaf functions
arm64: unify asm-arch manipulation
* for-next/pseudo-nmi:
: Pseudo-NMI code generation optimisations
arm64: irqflags: use alternative branches for pseudo-NMI logic
arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap
arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS
arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING
arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS
All the changes this time are minor devicetree corrections, the majority
being for 64-bit Rockchip SoC support. These are a couple of corrections
for properties that are in violation of the binding, some that put the
machine into safer operating points for the eMMC and thermal settings,
and missing properties that prevented rk356x PCIe and ethernet from
working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support
on various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner
to allow this to be used correctly after a futre driver change,
though it has no effect on older kernels.
-----BEGIN PGP SIGNATURE-----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=23z6
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"All the changes this time are minor devicetree corrections, the
majority being for 64-bit Rockchip SoC support. These are a couple of
corrections for properties that are in violation of the binding, some
that put the machine into safer operating points for the eMMC and
thermal settings, and missing properties that prevented rk356x PCIe
and ethernet from working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support on
various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner to
allow this to be used correctly after a futre driver change, though it
has no effect on older kernels"
* tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
Some Kconfig options has moved around after a 'make savedefconfig' run,
so move them to their new location to make it easier to see what other
options got removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
An often overlooked aspect of the skcipher walker API is that an
error is not just indicated by a non-zero return value, but by the
fact that walk->nbytes is zero.
Thus it is an error to call skcipher_walk_done after getting back
walk->nbytes == 0 from the previous interaction with the walker.
This is because when walk->nbytes is zero the walker is left in
an undefined state and any further calls to it may try to free
uninitialised stack memory.
The sm4 arm64 ccm code gets this wrong and ends up calling
skcipher_walk_done even when walk->nbytes is zero.
This patch rewrites the loop in a form that resembles other callers.
Reported-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Fixes: ae1b83c7d572 ("crypto: arm64/sm4 - add CE implementation for GCM mode")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fact that an error in the skcipher walker API are indicated
not only by a non-zero return value, but also by the fact that
walk->nbytes is zero, causes the layout of the skcipher walker
loop to be sufficiently different from the usual layout, which
is not a problem in itself, but it is likely to cause reading
confusion and difficulty in code maintenance.
This patch rewrites skcipher walker loop, and separates the
last chunk cryption from the loop to avoid wrong calls to the
skcipher walker API. In addition to following the usual convention
of checking walk->nbytes, it also makes the loop execute logic
clearer and easier to understand.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
An often overlooked aspect of the skcipher walker API is that an
error is not just indicated by a non-zero return value, but by the
fact that walk->nbytes is zero.
Thus it is an error to call skcipher_walk_done after getting back
walk->nbytes == 0 from the previous interaction with the walker.
This is because when walk->nbytes is zero the walker is left in
an undefined state and any further calls to it may try to free
uninitialised stack memory.
The arm64 ccm code has to deal with zero-length messages, and
it needs to process data even when walk->nbytes == 0 is returned.
It doesn't have this bug because there is an explicit check for
walk->nbytes != 0 prior to the skcipher_walk_done call.
However, the loop is still sufficiently different from the usual
layout and it appears to have been copied into other code which
then ended up with this bug. This patch rewrites it to follow the
usual convention of checking walk->nbytes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 4759fd87b928 ("arm64: dts: meson: g12a: add mmc nodes")
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/27d89baa-b8fa-baca-541b-ef17a97cde3c@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller")
Reported-by: Peter Suti <peter.suti@streamunlimited.com>
Tested-by: Vyacheslav Bocharov <adeep@lexina.in>
Tested-by: Peter Suti <peter.suti@streamunlimited.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
