IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since all scsi_cmnd.request users are gone, remove the request pointer
from struct scsi_cmnd.
Link: https://lore.kernel.org/r/20210809230355.8186-53-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. Cast away constness where necessary when passing a SCSI command
pointer to scsi_cmd_to_rq(). This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'request' member of struct scsi_cmnd is superfluous. The struct request
and struct scsi_cmnd data structures are adjacent and hence the request
pointer can be derived easily from a scsi_cmnd pointer. Introduce a helper
function that performs that conversion in a type-safe way. This patch is
the first step towards removing the request member from struct
scsi_cmnd. Making that change has the following advantages:
- This is a performance optimization since adding an offset to a pointer
takes less time than dereferencing a pointer.
- struct scsi_cmnd becomes smaller.
Link: https://lore.kernel.org/r/20210809230355.8186-2-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the sg_timeout and sg_reserved_size fields into the bsg_device and
scsi_device structures as they have nothing to do with generic block I/O.
Note that these values are now separate for bsg vs. SCSI device node
access, but that just matches how /dev/sg vs the other nodes has always
behaved.
Link: https://lore.kernel.org/r/20210729064845.1044147-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the per-device cdev_device_interface to store the bsg data in the char
device inode, and thus remove the need to embedd the bsg_class_device
structure in the request_queue.
Link: https://lore.kernel.org/r/20210729064845.1044147-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the ioctl handling in block/scsi_ioctl.c into its only caller in
drivers/scsi/scsi_ioctl.c.
Link: https://lore.kernel.org/r/20210724072033.1284840-19-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ensure SCSI ULD only has to call a single ioctl helper. This also adds a
bunch of missing ioctls to the ch driver, and removes the need for a
duplicate implementation of SCSI_IOCTL_SEND_COMMAND command.
Link: https://lore.kernel.org/r/20210724072033.1284840-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just handle the compat case in scsi_ioctl() using in_compat_syscall().
Link: https://lore.kernel.org/r/20210724072033.1284840-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new flag for devices that erroneously establish MEDIUM MAY HAVE
CHANGED unit attentions. Drivers can set this flag to make the SCSI
layer ignore media change events during resume.
[mkp: add "ignore" and add corresponding flag to struct scsi_device]
Link: https://lore.kernel.org/r/20210704075403.147114-2-martin.kepplinger@puri.sm
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_get_lba() confusingly returned the block layer sector number expressed
in units of 512 bytes. Now that we have a more aptly named
scsi_get_sector() function, make scsi_get_lba() return the actual LBA.
Link: https://lore.kernel.org/r/20210609033929.3815-13-martin.petersen@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-13-martin.petersen@oracle.com>
Since scsi_get_lba() returns a sector_t value instead of the LBA, the name
of that function is confusing. Introduce an identical function
scsi_get_sector().
Link: https://lore.kernel.org/r/20210513223757.3938-2-bvanassche@acm.org
Link: https://lore.kernel.org/r/20210609033929.3815-11-martin.petersen@oracle.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-11-martin.petersen@oracle.com>
We are about to remove the request pointer from struct scsi_cmnd and that
will complicate getting to the ref_tag via t10_pi_ref_tag() in the various
drivers. Introduce a helper function to retrieve the reference tag so
drivers will not have to worry about the details.
Link: https://lore.kernel.org/r/20210609033929.3815-2-martin.petersen@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message-Id: <20210609033929.3815-2-martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers. The major core change is a rework
to drop the status byte handling macros and the old bit shifted
definitions and the rest of the updates are minor fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYN7I6iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpRAQCkngYZ
35yQrqOxgOk2pfrysE95tHrV1MfJm2U49NFTwAEAuZutEvBUTfBF+sbcJ06r6q7i
H0hkJN/Io7enFs5v3WA=
=zwIa
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
Added RHBA and RPA attributes type and length.
As per FC_GC_7 document section "Table 400 – Attribute Entry Types and
associated Values" ASCII type attributes length can be vary from "4 to 256
byte". If we keep all RHBA ASCII attributes length 256 then total length
is going upto 2750, which is far more than 2048 (max frame size).
In libfc we do have logic to split FCP commands but not for CT commands.
Practically all version/names get covered with in 64 bytes except OS name,
for that we need 128 bytes. Hence length of all RBHA ASCII attributes
is reduced to 64 bytes and 128 bytes in case of OS name.
RPA attributes total length is within frame size.
Link: https://lore.kernel.org/r/20210603121623.10084-6-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add all attributes for RHBA and RPA registration.
Fallback mechanism is added between RBHA V2 and RHBA V1 attributes. In case
RHBA get fails for V2 attributes we fall back to V1 attribute registration.
Link: https://lore.kernel.org/r/20210603121623.10084-4-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As per the FC-GS-5 specification, attribute lengths of node_name and
manufacturer should in range of "4 to 64 Bytes" only.
Link: https://lore.kernel.org/r/20210603101404.7841-2-jhasan@marvell.com
Fixes: e721eb0616 ("scsi: scsi_transport_fc: Match HBA Attribute Length with HBAAPI V2.0 definitions")
CC: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow the compiler to verify the type of the second argument passed to
scsi_host_complete_all_commands().
Link: https://lore.kernel.org/r/20210524025457.11299-4-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it possible for the compiler to verify whether SAM and host
status codes are used correctly.
[mkp: resolve conflicts with Hannes' SCSI result series]
Link: https://lore.kernel.org/r/20210524025457.11299-3-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch prepares for converting SAM status codes into an enum. Without
this patch converting SAM status codes into an enumeration type would
trigger complaints about enum type mismatches for the SAS code.
Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For aborts, qedi needs to cleanup the FW then send the TMF from a worker
thread. While it's doing these the cmd could complete normally and the TMF
could time out. libiscsi would then complete the iscsi_task which will call
into the driver to cleanup the driver level resources while it still might
be accessing them for the cleanup/abort.
This has iscsi_eh_abort keep the iscsi_task ref if the TMF times out, so
qedi does not have to worry about if the task is being freed while in use
and does not need to get its own ref.
Link: https://lore.kernel.org/r/20210525181821.7617-18-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we haven't done a unbind target call we can race where
iscsi_conn_teardown wakes up the EH thread and then frees the conn while
those threads are still accessing the conn ehwait.
We can only do one TMF per session so this just moves the TMF fields from
the conn to the session. We can then rely on the
iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call
to remove the target and it's devices, and know after that point there is
no device or scsi-ml callout trying to access the session.
Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are a couple places where we could free the iscsi_cls_conn while it's
still in use. This adds some helpers to get/put a refcount on the struct
and converts an exiting user. Subsequent commits will then use the helpers
to fix 2 bugs in the eh code.
Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 0ab710458d ("scsi: iscsi: Perform connection failure entirely in
kernel space") has the following regressions/bugs that this patch fixes:
1. It can return cmds to upper layers like dm-multipath where that can
retry them. After they are successful the fs/app can send new I/O to the
same sectors, but we've left the cmds running in FW or in the net layer.
We need to be calling ep_disconnect if userspace is not up.
This patch only fixes the issue for offload drivers. iscsi_tcp will be
fixed in separate commit because it doesn't have a ep_disconnect call.
2. The drivers that implement ep_disconnect expect that it's called before
conn_stop. Besides crashes, if the cleanup_task callout is called before
ep_disconnect it might free up driver/card resources for session1 then they
could be allocated for session2. But because the driver's ep_disconnect is
not called it has not cleaned up the firmware so the card is still using
the resources for the original cmd.
3. The stop_conn_work_fn can run after userspace has done its recovery and
we are happily using the session. We will then end up with various bugs
depending on what is going on at the time.
We may also run stop_conn_work_fn late after userspace has called stop_conn
and ep_disconnect and is now going to call start/bind conn. If
stop_conn_work_fn runs after bind but before start, we would leave the conn
in a unbound but sort of started state where IO might be allowed even
though the drivers have been set in a state where they no longer expect
I/O.
4. Returning -EAGAIN in iscsi_if_destroy_conn if we haven't yet run the in
kernel stop_conn function is breaking userspace. We should have been doing
this for the caller.
Link: https://lore.kernel.org/r/20210525181821.7617-8-michael.christie@oracle.com
Fixes: 0ab710458d ("scsi: iscsi: Perform connection failure entirely in kernel space")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Subsequent commits allow the kernel to do ep_disconnect. In that case we
will have to get a proper refcount on the ep so one thread does not delete
it from under another.
Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new
I/O but every driver except cxgbi and iscsi_tcp can still get I/O from
__iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before
ep_disconnect. This could happen if we were terminating the session, and
the logout timed out before it was even sent to libiscsi.
Fix the issue by adding a helper which reverses the bind_conn call that
allows new I/O to be queued. Drivers implementing ep_disconnect can use this
to make sure new I/O is not queued to them when handling the disconnect.
Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This adds a helper to detect if a cmd has completed but is not yet freed.
Link: https://lore.kernel.org/r/20210525181821.7617-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Originally the SCSI subsystem has been using 'special' SCSI status codes,
which were the SAM-specified ones but shifted by 1. As most drivers have
now been modified to use the SAM-specified ones, having two nearly
identical sets of definitions only causes confusion.
The Linux-specifed SCSI status codes have been marked obsolete for several
years so drop them and use the SAM-specified status codes throughout.
Link: https://lore.kernel.org/r/20210427083046.31620-41-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The message byte is now unused, so we can drop the helper to set the
message byte and the check for message bytes during error recovery.
Link: https://lore.kernel.org/r/20210427083046.31620-38-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add helper to convert message byte into a host byte code.
Link: https://lore.kernel.org/r/20210427083046.31620-18-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add accessor functions for the host and status byte.
Link: https://lore.kernel.org/r/20210427083046.31620-17-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver_byte field in the result is now unused, so we can drop the
definitions.
Link: https://lore.kernel.org/r/20210427083046.31620-15-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().
Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.
[mkp: fix zeroday srp warning]
Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fix
Add a helper function scsi_status_is_check_condition() to encapsulate the
frequent checks for SAM_STAT_CHECK_CONDITION.
Link: https://lore.kernel.org/r/20210427083046.31620-9-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.
Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return the actual error code in __scsi_execute() (which, according to the
documentation, should have happened anyway). And audit all callers to cope
with negative return values from __scsi_execute() and friends.
[mkp: resolve conflict and return bool]
Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Applying the __packed attribute to an entire data structure results in
suboptimal code on architectures that do not support unaligned accesses.
Hence apply the __packed attribute only to those data members that are
not naturally aligned.
Link: https://lore.kernel.org/r/20210524041211.9480-4-bvanassche@acm.org
Cc: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend the standard INQUIRY data to 96 bytes and fill in the VERSION
DESCRIPTOR fields.
The layout follows SPC-4:
- SCSI architecture standard
- SCSI transport protocol standard
- SCSI primary command set standard
- SCSI device type command set standard
All version descriptor values are defined as "no version claimed" because
some initiators fail to recognize anything else.
[mkp: whitespace]
Link: https://lore.kernel.org/r/20210513192804.1252142-3-k.shelekhin@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a SCSI device is offline a MODE SENSE command will return a result
with only DID_NO_CONNECT set. In sd_read_write_protect_flag() only the
status byte of the result is checked. Despite a returned status of
DID_NO_CONNECT the command is considered successful and we read
sdkp->write_prot from a buffer containing garbage.
Modify scsi_status_is_good() to treat DID_NO_CONNECT as a failure case.
Link: https://lore.kernel.org/r/20210330114727.234467-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core
change is using a sbitmap instead of an atomic for queue tracking.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYInvqCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYh2AP0SgqqL
WYZRT2oiyBOKD28v+ceOSiXvgjPlqABwVMC0BAEAn29/wNCxyvzZ1k/b0iPJ4M+S
klkSxLzXKQLzJBgdK5w=
=p5B/
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Improve readability of the code in the SCSI core by introducing an
enumeration type for the values used internally that decide how to continue
processing a SCSI command. The eh_*_handler return values have not been
changed because that would involve modifying all SCSI drivers.
The output of the following command has been inspected to verify that no
out-of-range values are assigned to a variable of type enum
scsi_disposition:
KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/
Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_device.sdev_target is used in more code than the single_lun code,
hence remove the comment next to the definition of the sdev_target member.
Link: https://lore.kernel.org/r/20210415220826.29438-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the unchecked_isa_dma now that all users are gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
