IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
adi,ad7949
* Fix a wrong bitmask that could lead to an undefined bit being included.
adi,adi-axi-adc
* Add missing Kconfig dependencies
adi,adis16400
* Wrong error code handling in adis16400 that could lead to failed probe.
hid-sensor-humidity, temperature
* Fix alignment and space for timestamp channel.
hid-sensor-prox
* Fix an issue with handling of exponent on the channel scaling.
invensense,mpu3050
* Fix a hole in error handling.
qcom,spi-vadc
* Correct scaling
st,ab8500-adc
* Fix wrong scaling (by factor of 1000)
st,stm32-adc
* Add missing HAS_IOMEM dependency
st,stm32-timer-cnt
* Report count when running off internal clock
* Fix issue with not checking ceiling before trying to write to hardware
* Ensure driver doesn't have stashed state which doesn't match hardware by
rereading from hardware in a slow path.
-----BEGIN PGP SIGNATURE-----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=L5Yl
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.12a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO and counter fixes for the 5.12 cycle
adi,ad7949
* Fix a wrong bitmask that could lead to an undefined bit being included.
adi,adi-axi-adc
* Add missing Kconfig dependencies
adi,adis16400
* Wrong error code handling in adis16400 that could lead to failed probe.
hid-sensor-humidity, temperature
* Fix alignment and space for timestamp channel.
hid-sensor-prox
* Fix an issue with handling of exponent on the channel scaling.
invensense,mpu3050
* Fix a hole in error handling.
qcom,spi-vadc
* Correct scaling
st,ab8500-adc
* Fix wrong scaling (by factor of 1000)
st,stm32-adc
* Add missing HAS_IOMEM dependency
st,stm32-timer-cnt
* Report count when running off internal clock
* Fix issue with not checking ceiling before trying to write to hardware
* Ensure driver doesn't have stashed state which doesn't match hardware by
rereading from hardware in a slow path.
* tag 'iio-fixes-for-5.12a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: hid-sensor-temperature: Fix issues of timestamp channel
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: hid-sensor-prox: Fix scale not correct issue
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
Fix an off by three orders of magnitude error in the AB8500
GPADC driver. Luckily it showed up quite quickly when trying
to make use of it. The processed reads were returning
microvolts, microamperes and microcelsius instead of millivolts,
milliamperes and millicelsius as advertised.
Cc: stable@vger.kernel.org
Fixes: 07063bbfa98e ("iio: adc: New driver for the AB8500 GPADC")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201224011700.1059659-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The hardware conversion mode only exists in the AB8500
version of the chip, as it is lacking in the AB8505 it
will not be in the device tree and we should just not
even try to obtain it.
The driver already contains code to avoid using a
non-existing hardware conversion IRQ at conversion time.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201218222013.383704-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If a driver does not assign an of_node to a IIO device to IIO core will
automatically assign the of_node of the parent device. This automatic
assignment is done in the iio_device_register() function.
There is a fair amount of drivers that currently manually assign the
of_node of the IIO device. All but 4 of them can make use of the automatic
assignment though.
The exceptions are:
* mxs-lradc-adc: Which uses the of_node of the parent of the parent.
* stm32-dfsdm-adc, stm32-adc and stm32-dac: Which reference the of_node
assigned to the IIO device before iio_device_register() is called.
All other drivers are updated to use automatic assignment. This reduces
the amount of boilerplate code involved in setting up the IIO device.
The patch has mostly been auto-generated with the following semantic patch
// <smpl>
@exists@
expression indio_dev;
expression parent;
@@
indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(&parent, ...)
...
-indio_dev->dev.of_node = parent.of_node;
@exists@
expression indio_dev;
expression parent;
@@
indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(parent, ...)
...
-indio_dev->dev.of_node = parent->of_node;
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
I = devm_iio_device_alloc(P, SP);
...
- I->dev.parent = P;
It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'
But this is is only done in case where the block is left empty.
The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.
However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a new driver for the ST-Ericsson AB8500 GPADC, which
replaces the old driver in drivers/mfd/ab8500-gpadc.c and
thus gets rid of another necessarily different custom driver
from the times before IIO existed.
The AB8500 GPADC can convert 10 different channels and these
are used for monitoring voltages in the U8500 chipset, some
are used for battery charging, some for temperature
monitoring.
As this is very core functionality that a lot of drivers
depend on and was formerly compiled in with the AB8500 core
driver, we deafault it to 'y' in Kconfig: it can be compiled
out but it is really not advisible: the platform can
for example overheat if we do.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
