IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Test 2141: Add rsvp filter with tcp proto and specific IP address
Test 5267: Add rsvp filter with udp proto and specific IP address
Test 2819: Add rsvp filter with src ip and src port
Test c967: Add rsvp filter with tunnelid and continue action
Test 5463: Add rsvp filter with tunnel and pipe action
Test 2332: Add rsvp filter with miltiple actions
Test 8879: Add rsvp filter with tunnel and skp flag
Test 8261: List rsvp filters
Test 8989: Delete rsvp filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test e122: Add route filter with from and to tag
Test 6573: Add route filter with fromif and to tag
Test 1362: Add route filter with to flag and reclassify action
Test 4720: Add route filter with from flag and continue actions
Test 2812: Add route filter with form tag and pipe action
Test 7994: Add route filter with miltiple actions
Test 4312: List route filters
Test 2634: Delete route filter with pipe action
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 5294: Add flow filter with map key and ops
Test 3514: Add flow filter with map key or ops
Test 7534: Add flow filter with map key xor ops
Test 4524: Add flow filter with map key rshift ops
Test 0230: Add flow filter with map key addend ops
Test 2344: Add flow filter with src map key
Test 9304: Add flow filter with proto map key
Test 9038: Add flow filter with proto-src map key
Test 2a03: Add flow filter with proto-dst map key
Test a073: Add flow filter with iif map key
Test 3b20: Add flow filter with priority map key
Test 8945: Add flow filter with mark map key
Test c034: Add flow filter with nfct map key
Test 0205: Add flow filter with nfct-src map key
Test 5315: Add flow filter with nfct-src map key
Test 7849: Add flow filter with nfct-proto-src map key
Test 9902: Add flow filter with nfct-proto-dst map key
Test 6742: Add flow filter with rt-classid map key
Test 5432: Add flow filter with sk-uid map key
Test 4134: Add flow filter with sk-gid map key
Test 4522: Add flow filter with vlan-tag map key
Test 4253: Add flow filter with rxhash map key
Test 4452: Add flow filter with hash key list
Test 4341: Add flow filter with muliple ops
Test 4392: List flow filters
Test 4322: Change flow filter with map key num
Test 2320: Replace flow filter with map key num
Test 3213: Delete flow filter with map key num
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 6273: Add cgroup filter with cmp ematch u8/link layer and drop action
Test 4721: Add cgroup filter with cmp ematch u8/link layer with trans
flag and pass action
Test d392: Add cgroup filter with cmp ematch u16/link layer and pipe action
Test 0234: Add cgroup filter with cmp ematch u32/link layer and miltiple
actions
Test 8499: Add cgroup filter with cmp ematch u8/network layer and pass
action
Test b273: Add cgroup filter with cmp ematch u8/network layer with trans
flag and drop action
Test 1934: Add cgroup filter with cmp ematch u16/network layer and pipe
action
Test 2733: Add cgroup filter with cmp ematch u32/network layer and
miltiple actions
Test 3271: Add cgroup filter with NOT cmp ematch rule and pass action
Test 2362: Add cgroup filter with two ANDed cmp ematch rules and single
action
Test 9993: Add cgroup filter with two ORed cmp ematch rules and single
action
Test 2331: Add cgroup filter with two ANDed cmp ematch rules and one ORed
ematch rule and single action
Test 3645: Add cgroup filter with two ANDed cmp ematch rules and one NOT
ORed ematch rule and single action
Test b124: Add cgroup filter with u32 ematch u8/zero offset and drop
action
Test 7381: Add cgroup filter with u32 ematch u8/zero offset and invalid
value >0xFF
Test 2231: Add cgroup filter with u32 ematch u8/positive offset and drop
action
Test 1882: Add cgroup filter with u32 ematch u8/invalid mask >0xFF
Test 1237: Add cgroup filter with u32 ematch u8/missing offset
Test 3812: Add cgroup filter with u32 ematch u8/missing AT keyword
Test 1112: Add cgroup filter with u32 ematch u8/missing value
Test 3241: Add cgroup filter with u32 ematch u8/non-numeric value
Test e231: Add cgroup filter with u32 ematch u8/non-numeric mask
Test 4652: Add cgroup filter with u32 ematch u8/negative offset and pass
Test 1331: Add cgroup filter with u32 ematch u16/zero offset and pipe
action
Test e354: Add cgroup filter with u32 ematch u16/zero offset and invalid
value >0xFFFF
Test 3538: Add cgroup filter with u32 ematch u16/positive offset and drop
action
Test 4576: Add cgroup filter with u32 ematch u16/invalid mask >0xFFFF
Test b842: Add cgroup filter with u32 ematch u16/missing offset
Test c924: Add cgroup filter with u32 ematch u16/missing AT keyword
Test cc93: Add cgroup filter with u32 ematch u16/missing value
Test 123c: Add cgroup filter with u32 ematch u16/non-numeric value
Test 3675: Add cgroup filter with u32 ematch u16/non-numeric mask
Test 1123: Add cgroup filter with u32 ematch u16/negative offset and drop
action
Test 4234: Add cgroup filter with u32 ematch u16/nexthdr+ offset and pass
action
Test e912: Add cgroup filter with u32 ematch u32/zero offset and pipe
action
Test 1435: Add cgroup filter with u32 ematch u32/positive offset and drop
action
Test 1282: Add cgroup filter with u32 ematch u32/missing offset
Test 6456: Add cgroup filter with u32 ematch u32/missing AT keyword
Test 4231: Add cgroup filter with u32 ematch u32/missing value
Test 2131: Add cgroup filter with u32 ematch u32/non-numeric value
Test f125: Add cgroup filter with u32 ematch u32/non-numeric mask
Test 4316: Add cgroup filter with u32 ematch u32/negative offset and drop
action
Test 23ae: Add cgroup filter with u32 ematch u32/nexthdr+ offset and pipe
action
Test 23a1: Add cgroup filter with canid ematch and single SFF
Test 324f: Add cgroup filter with canid ematch and single SFF with mask
Test 2576: Add cgroup filter with canid ematch and multiple SFF
Test 4839: Add cgroup filter with canid ematch and multiple SFF with masks
Test 6713: Add cgroup filter with canid ematch and single EFF
Test ab9d: Add cgroup filter with canid ematch and multiple EFF with masks
Test 5349: Add cgroup filter with canid ematch and a combination of
SFF/EFF
Test c934: Add cgroup filter with canid ematch and a combination of
SFF/EFF with masks
Test 4319: Replace cgroup filter with diffferent match
Test 4636: Delete cgroup filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 23c3: Add cBPF filter with valid bytecode
Test 1563: Add cBPF filter with invalid bytecode
Test 2334: Add eBPF filter with valid object-file
Test 2373: Add eBPF filter with invalid object-file
Test 4423: Replace cBPF bytecode
Test 5122: Delete cBPF filter
Test e0a9: List cBPF filters
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 1b620d539ccc ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.
Fixes: b438b3b8d6e6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a regression test for commit 592335a4164c ("bonding: accept
unsolicited NA message") and commit b7f14132bf58 ("bonding: use unspecified
address if no available link local address"). When the bond interface
up and no available link local address, unspecified address(::) is used to
send the NS message. The unsolicited NA message should also be accepted
for validation.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220920033047.173244-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Remove the recent "unshare time namespace on vfork+exec" feature (Andrei Vagin)
-----BEGIN PGP SIGNATURE-----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=yFGx
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve reverts from Kees Cook:
"The recent work to support time namespace unsharing turns out to have
some undesirable corner cases, so rather than allowing the API to stay
exposed for another release, it'd be best to remove it ASAP, with the
replacement getting another cycle of testing. Nothing is known to use
this yet, so no userspace breakage is expected.
For more details, see:
https://lore.kernel.org/lkml/ed418e43ad28b8688cfea2b7c90fce1c@ispras.ru
Summary:
- Remove the recent 'unshare time namespace on vfork+exec' feature
(Andrei Vagin)"
* tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "fs/exec: allow to unshare a time namespace on vfork+exec"
Revert "selftests/timens: add a test for vfork+exit"
Add IPv4 and IPv6 test cases for unresolved multicast routes, testing
that queued packets are forwarded after installing a matching (S, G)
route.
The test cases can be used to reproduce the bugs fixed in "ipmr: Always
call ip{,6}_mr_forward() from RCU read-side critical section".
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous patch added a test which can be used instead of qos_burst.sh.
Remove this test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an equivalent test to qos_burst, the test's purpose is same, but the
new test uses simpler topology and does not require forcing low speed.
In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea
is to use a shaper in order to limit the traffic and create congestion.
qos_burst test uses small pool, sends many small packets, and verify that
packets are not dropped, which means that many descriptors can be handled.
This test should check the change that commit c864769add96
("mlxsw: Configure descriptor buffers") pushed.
Instead, the new test tries to use more than 85% of maximum supported
descriptors. The idea is to use big pool (as much as the ASIC supports),
such that the pool size does not limit the traffic, then send many small
packets, which means that many descriptors are used, and check how many
packets the switch can handle.
The usage of shaper allows to run the test in all ASICs, regardless of
the CPU abilities, as it is able to create the congestion with low rate
of packets.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The maximum pool size is exposed via 'devlink sb' command. The next
patch will add a test which increases some pools to the maximum size.
Add a function to query the value.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run the tests there, some adjustments are required. Use shapers to limit
the traffic instead of forcing speed. Note that for several ports, the
speed configuration is just for autoneg issues, so shaper is not needed
instead.
The tests already use ETS qdisc as a root and RED qdiscs as children. Add
a new TBF shaper to limit the rate of traffic, and use it as a root qdisc,
then save the previous hierarchy of qdiscs under the new TBF root.
In some ASICs, the shapers do not limit the traffic as accurately as
forcing speed. To make the tests stable, allow the backlog size to be up to
+-10% of the threshold. The aim of the tests is to make sure that with
backlog << threshold, there are no drops, and that packets are dropped
somewhere in vicinity of the configured threshold.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run QOS tests there, some adjustments are required. Use shapers to
limit the traffic instead of forcing speed. Note that for several ports,
the speed configuration is just for autoneg issues, so shaper is not needed
instead.
In tests that already use shapers, set the existing shaper to be a child of
a new TBF shaper which is added as a root qdisc and acts as a port shaper.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Allow to configure for 64-bit kernel with ARCH=parisc
* Fix asm/errno.h includes in tools directory for parisc and xtensa
* Clean up iosapic memory allocation
* Minor typo and spelling fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYydbwQAKCRD3ErUQojoP
X0JNAQD050ybcW5iTIs1Hns/20BmpPyI+ph75iNE5jRX/85i/wD8DdfUkI06sfzq
vIshpSaXY5AuBNQsblXJpiFCjbU4/Q4=
=TCpO
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some small parisc architecture fixes for 6.0-rc6:
One patch lightens up a previous commit and thus unbreaks building the
debian kernel, which tries to configure a 64-bit kernel with the
ARCH=parisc environment variable set.
The other patches fixes asm/errno.h includes in the tools directory
and cleans up memory allocation in the iosapic driver.
Summary:
- Allow configuring 64-bit kernel with ARCH=parisc
- Fix asm/errno.h includes in tools directory for parisc and xtensa
- Clean up iosapic memory allocation
- Minor typo and spelling fixes"
* tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Allow CONFIG_64BIT with ARCH=parisc
parisc: remove obsolete manual allocation aligning in iosapic
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
Input: hp_sdc: fix spelling typo in comment
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 2029: Add xt action with log-prefix
Test 3562: Replace xt action log-prefix
Test 8291: Delete xt action with valid index
Test 5169: Delete xt action with invalid index
Test 7284: List xt actions
Test 5010: Flush xt actions
Test 8437: Add xt action with duplicate index
Test 2837: Add xt action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 5153: Add gate action with priority and sched-entry
Test 7189: Add gate action with base-time
Test a721: Add gate action with cycle-time
Test c029: Add gate action with cycle-time-ext
Test 3719: Replace gate base-time action
Test d821: Delete gate action with valid index
Test 3128: Delete gate action with invalid index
Test 7837: List gate actions
Test 9273: Flush gate actions
Test c829: Add gate action with duplicate index
Test 3043: Add gate action with invalid index
Test 2930: Add gate action with cookie
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test c826: Add ctinfo action with default setting
Test 0286: Add ctinfo action with dscp
Test 4938: Add ctinfo action with valid cpmark and zone
Test 7593: Add ctinfo action with drop control
Test 2961: Replace ctinfo action zone and action control
Test e567: Delete ctinfo action with valid index
Test 6a91: Delete ctinfo action with invalid index
Test 5232: List ctinfo actions
Test 7702: Flush ctinfo actions
Test 3201: Add ctinfo action with duplicate index
Test 8295: Add ctinfo action with invalid index
Test 3964: Replace ctinfo action with invalid goto_chain control
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the fullmesh prefix test of addr_nr_ns2 together with its other
prefix tests.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch reverts the code that this test verified.
This reverts commit 6342140db6609a0c7d34f68c52b2947468e0e630.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220913102551.1121611-2-avagin@google.com
tools/include/uapi/asm/errno.h currently attempts to include
non-existent arch-specific errno.h header for xtensa.
Remove this case so that <asm-generic/errno.h> is used instead,
and add the missing arch-specific header for parisc.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=ia64&ver=5.8.3-1%7Eexp1&stamp=1598340829&raw=1
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
This KUnit fixes update for Linux 6.0-rc5 consists of 2 fixes to test
build and a fix to incorrect taint reason reporting.
-----BEGIN PGP SIGNATURE-----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=xA12
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to test build and a fix for incorrect taint reason reporting"
* tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: Add new "test" taint to kernel-chktaint
kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves
kunit: fix assert_type for comparison macros
- Fix per-thread mmaps for multi-threaded targets, noticed with 'perf top --pid' with
multithreaded targets.
- Fix synthesis failure warnings in 'perf record'.
- Fix L2 Topdown metrics disappearance for raw events in 'perf stat'.
- Fix out of bound access in some CPU masks.
- Fix segfault if there is no CPU PMU table and a metric is sought, noticed when
building with NO_JEVENTS=1.
- Skip dummy event attr check in 'perf script' fixing nonsensical warning about
UREGS attribute not set, as 'dummy' events have no samples.
- Fix 'iregs' field handling with dummy events on hybrid systems in 'perf script'.
- Prevent potential memory leak in c2c_he_zalloc() in 'perf c2c'.
- Don't install data files with x permissions.
- Fix types for print format in dlfilter-show-cycles.
- Switch deprecated openssl MD5_* functions to new EVP API in 'genelf'.
- Remove redundant word 'contention' in 'perf lock' help message.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYxqBaAAKCRCyPKLppCJ+
J6euAP0Rmztl5DUU7gCI939JHuVuC6ry68FgMPtpAKlD7QHgFQD7BwrhfVkvvLCH
wWNf69a47ZJwriZ2pLOhfYDQWk7SMQU=
=NiL3
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.0-2022-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix per-thread mmaps for multi-threaded targets, noticed with
'perf top --pid' with multithreaded targets
- Fix synthesis failure warnings in 'perf record'
- Fix L2 Topdown metrics disappearance for raw events in 'perf stat'
- Fix out of bound access in some CPU masks
- Fix segfault if there is no CPU PMU table and a metric is sought,
noticed when building with NO_JEVENTS=1
- Skip dummy event attr check in 'perf script' fixing nonsensical
warning about UREGS attribute not set, as 'dummy' events have no
samples
- Fix 'iregs' field handling with dummy events on hybrid systems in
'perf script'
- Prevent potential memory leak in c2c_he_zalloc() in 'perf c2c'
- Don't install data files with x permissions
- Fix types for print format in dlfilter-show-cycles
- Switch deprecated openssl MD5_* functions to new EVP API in 'genelf'
- Remove redundant word 'contention' in 'perf lock' help message
* tag 'perf-tools-fixes-for-v6.0-2022-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf record: Fix synthesis failure warnings
perf tools: Don't install data files with x permissions
perf script: Fix Cannot print 'iregs' field for hybrid systems
perf lock: Remove redundant word 'contention' in help message
perf dlfilter dlfilter-show-cycles: Fix types for print format
libperf evlist: Fix per-thread mmaps for multi-threaded targets
perf c2c: Prevent potential memory leak in c2c_he_zalloc()
perf genelf: Switch deprecated openssl MD5_* functions to new EVP API
tools/perf: Fix out of bound access to cpu mask array
perf affinity: Fix out of bound access to "sched_cpus" mask
perf stat: Fix L2 Topdown metrics disappear for raw events
perf script: Skip dummy event attr check
perf metric: Return early if no CPU PMU table exists
Florian Westhal says:
====================
netfilter: bugfixes for net
The following set contains four netfilter patches for your *net* tree.
When there are multiple Contact headers in a SIP message its possible
the next headers won't be found because the SIP helper confuses relative
and absolute offsets in the message. From Igor Ryzhov.
Make the nft_concat_range self-test support socat, this makes the
selftest pass on my test VM, from myself.
nf_conntrack_irc helper can be tricked into opening a local port forward
that the client never requested by embedding a DCC message in a PING
request sent to the client. Fix from David Leadbeater.
Both have been broken since the kernel 2.6.x days.
The 'osf' match might indicate success while it could not find
anything, broken since 5.2 . Fix from Pablo Neira.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some calls to synthesis functions set err < 0 but only warn about the
failure and continue. However they do not set err back to zero, relying
on subsequent code to do that.
That changed with the introduction of option --synth. When --synth=no
subsequent functions that set err back to zero are not called.
Fix by setting err = 0 in those cases.
Example:
Before:
$ perf record --no-bpf-event --synth=all -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
After:
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
Fixes: 41b740b6e8a994e5 ("perf record: Add --synth option")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
install(1), by default, installs with rwxr-xr-x permissions. Modify
perf's Makefile to pass '-m 644' when installing:
* Documentation/tips.txt
* examples/bpf/*
* perf-completion.sh
* perf_dlfilter.h header
* scripts/perl/Perf-Trace-Util/lib/Perf/Trace/*
* scripts/perl/*.pl
* tests/attr/*
* tests/attr.py
* tests/shell/lib/*.sh
* trace/strace/groups/*
All those are supposed to be non-executable. Either they are not scripts
at all, or they don't have shebang.
Signed-off-by: <jslaby@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908060426.9619-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid
systems to collect metadata records") adds a dummy event on hybrid
systems to fix the symbol "unknown" issue when the workload is created
in a P-core but runs on an E-core. The added dummy event will cause
"perf script -F iregs" to fail. Dummy events do not have "iregs"
attribute set, so when we do evsel__check_attr, the "iregs" attribute
check will fail, so the issue happened.
The following commit [1] has fixed a similar issue by skipping the attr
check for the dummy event because it does not have any samples anyway. It
works okay for the normal mode, but the issue still happened when running
the test in the pipe mode. In the pipe mode, it calls process_attr() which
still checks the attr for the dummy event. This commit fixed the issue by
skipping the attr check for the dummy event in the API evsel__check_attr,
Otherwise, we have to patch everywhere when evsel__check_attr() is called.
Before:
#./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field.
0x120 [0x90]: failed to process type: 64
#
After:
# ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
ABI:2 CX:0x55b8efa87000 DX:0x55b8efa7e000 DI:0xffffba5e625efbb0 R8:0xffff90e51f8ae100
ABI:2 CX:0x7f1dae1e4000 DX:0xd0 DI:0xffff90e18c675ac0 R8:0x71
ABI:2 CX:0xcc0 DX:0x1 DI:0xffff90e199880240 R8:0x0
ABI:2 CX:0xffff90e180dd7500 DX:0xffff90e180dd7500 DI:0xffff90e180043500 R8:0x1
ABI:2 CX:0x50 DX:0xffff90e18c583bd0 DI:0xffff90e1998803c0 R8:0x58
#
[1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/
Fixes: b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
drivers/net/ethernet/freescale/fec.h
7d650df99d52 ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Avoid compiler warning about format %llu that expects long long unsigned
int but argument has type __u64.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: c3afd6e50fce824f ("perf dlfilter: Add dlfilter-show-cycles")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220905074735.4513-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The offending commit removed mmap_per_thread(), which did not consider
the different set-output rules for per-thread mmaps i.e. in the per-thread
case set-output is used for file descriptors of the same thread not the
same cpu.
This was not immediately noticed because it only happens with
multi-threaded targets and we do not have a test for that yet.
Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu
events i.e. to continue to allow the mixing of per-thread and per-cpu
mmaps.
Debug messages (with -vv) show the file descriptors that are opened with
sys_perf_event_open. New debug messages are added (needs -vvv) that show
also which file descriptors are mmapped and which are redirected with
set-output.
In the per-cpu case (cpu != -1) file descriptors for the same CPU are
set-output to the first file descriptor for that CPU.
In the per-thread case (cpu == -1) file descriptors for the same thread are
set-output to the first file descriptor for that thread.
Example (process 17489 has 2 threads):
Before (but with new debug prints):
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
failed to mmap with 22 (Invalid argument)
After:
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 1: mmapping fd 6
<SNIP>
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ]
Per-cpu example (process 20341 has 2 threads, same as above):
$ perf record --no-bpf-event -vvv -p 20341
<SNIP>
sys_perf_event_open: pid 20341 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 20342 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 20341 cpu 1 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 20342 cpu 1 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid 20341 cpu 2 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 20342 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 20341 cpu 3 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 20342 cpu 3 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 20341 cpu 4 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid 20342 cpu 4 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 20341 cpu 5 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 20342 cpu 5 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 20341 cpu 6 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 20342 cpu 6 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 20341 cpu 7 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 20342 cpu 7 group_fd -1 flags 0x8 = 20
<SNIP>
libperf: mmap_per_cpu: nr cpu values 8 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
libperf: idx 1: mmapping fd 7
libperf: idx 1: set output fd 8 -> 7
libperf: idx 2: mmapping fd 9
libperf: idx 2: set output fd 10 -> 9
libperf: idx 3: mmapping fd 11
libperf: idx 3: set output fd 12 -> 11
libperf: idx 4: mmapping fd 13
libperf: idx 4: set output fd 14 -> 13
libperf: idx 5: mmapping fd 15
libperf: idx 5: set output fd 16 -> 15
libperf: idx 6: mmapping fd 17
libperf: idx 6: set output fd 18 -> 17
libperf: idx 7: mmapping fd 19
libperf: idx 7: set output fd 20 -> 19
<SNIP>
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ]
Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Reported-by: Tomáš Trnka <trnka@scm.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220905114209.8389-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
wireless and bluetooth subtrees
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=DeAB
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
subtrees.
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for
of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after
enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in
rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N"
* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
sch_sfb: Also store skb len before calling child enqueue
net: phy: lan87xx: change interrupt src of link_up to comm_ready
net/smc: Fix possible access to freed memory in link clear
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
net: usb: qmi_wwan: add Quectel RM520N
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
stmmac: intel: Simplify intel_eth_pci_remove()
net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
ipv6: sr: fix out-of-bounds read when setting HMAC data.
bonding: accept unsolicited NA message
bonding: add all node mcast address when slave up
bonding: use unspecified address if no available link local address
wifi: use struct_group to copy addresses
wifi: mac80211_hwsim: check length for virtio packets
...
Commit c272612cb4a2 ("kunit: Taint the kernel when KUnit tests are run")
added a new taint flag for when in-kernel tests run. This commit adds
recognition of this new flag in kernel-chktaint.
With this change the correct reason will be reported if the kernel is
tainted because of a test run.
Amended Commit log: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Joe Fradley <joefradley@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are different flavors of 'nc' around, this script fails on
my test vm because 'nc' is 'nmap-ncat' which isn't 100% compatible.
Add socat support and use it if available.
Signed-off-by: Florian Westphal <fw@strlen.de>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Free allocated resources when zalloc() fails for members in c2c_he, to
prevent potential memory leak in c2c_he_zalloc().
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220906032906.21395-4-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to the flavored EVP API like in test-libcrypto.c, and remove the
bad gcc #pragma.
Inspired-by: 5b245985a6de5ac1 ("tools build: Switch to new openssl API for test-libcrypto")
Signed-off-by: Zixuan Tan <tanzixuan.me@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/CABwm_eTnARC1GwMD-JF176k8WXU1Z0+H190mvXn61yr369qt6g@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cpu mask init code in "record__mmap_cpu_mask_init" function access
"bits" array part of "struct mmap_cpu_mask". The size of this array is
the value from cpu__max_cpu().cpu. This array is used to contain the
cpumask value for each cpu. While setting bit for each cpu, it calls
"set_bit" function which access index in "bits" array.
If we provide a command line option to -C which is greater than the
number of CPU's present in the system, the set_bit could access an array
member which is out-of the array size. This is because currently, there
is no boundary check for the CPU. This will result in seg fault:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Segmentation fault (core dumped)
<<>>
Debugging with gdb, points to function flow as below:
<<>>
set_bit
record__mmap_cpu_mask_init
record__init_thread_default_masks
record__init_thread_masks
cmd_record
<<>>
Fix this by adding boundary check for the array.
After the patch:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Failed to initialize parallel data streaming masks
<<>>
With this fix, if -C is given a non-exsiting CPU, perf
record will fail with:
<<>>
./perf record -C 50 ls
Failed to initialize parallel data streaming masks
<<>>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220905141929.7171-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The affinity code in "affinity_set" function access array named
"sched_cpus". The size for this array is allocated in affinity_setup
function which is nothing but value from get_cpu_set_size. This is used
to contain the cpumask value for each cpu.
While setting bit for each cpu, it calls "set_bit" function which access
index in sched_cpus array. If we provide a command-line option to -C
which is more than the number of CPU's present in the system, the
set_bit could access an array member which is out-of the array size.
This is because currently, there is no boundary check for the CPU. This
will result in seg fault:
<<>>
./perf stat -C 12323431 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Segmentation fault (core dumped)
<<>>
Fix this by adding boundary check for the array.
After the fix from powerpc system:
<<>>
./perf stat -C 12323431 ls 1>out
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Performance counter stats for 'CPU(s) 12323431':
<not supported> msec cpu-clock
<not supported> context-switches
<not supported> cpu-migrations
<not supported> page-faults
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
0.001192373 seconds time elapsed
<<>>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220905141929.7171-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Doing call_rcu() million times a second becomes a bottle neck.
Convert non-preallocated hash map from call_rcu to SLAB_TYPESAFE_BY_RCU.
The rcu critical section is no longer observed for one htab element
which makes non-preallocated hash map behave just like preallocated hash map.
The map elements are released back to kernel memory after observing
rcu critical section.
This improves 'map_perf_test 4' performance from 100k events per second
to 250k events per second.
bpf_mem_alloc + percpu_counter + typesafe_by_rcu provide 10x performance
boost to non-preallocated hash map and make it within few % of preallocated map
while consuming fraction of memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-8-alexei.starovoitov@gmail.com
Make test_maps more stressful with more parallelism in
update/delete/lookup/walk including different value sizes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-4-alexei.starovoitov@gmail.com
