IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit f67a90a0c8 ]
Lately, an additional locking was added by commit c0a40097f0
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c44000b653 ]
The imc perf fd close() calls are missing from all error paths. In
addition, get_mem_bw_imc() handles fds in a for loop but close() is
based on two fixed indexes READ and WRITE.
Open code inner for loops to READ+WRITE entries for clarity and add a
function to close() IMC fds properly in all cases.
Fixes: 7f4d257e3a ("selftests/resctrl: Add callback to start a benchmark")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8ff7f5c8 ]
The resctrl selftest code contains a number of perror() calls. Some of
them come with hash character and some don't. The kselftest framework
provides ksft_perror() that is compatible with test output formatting
so it should be used instead of adding custom hash signs.
Some perror() calls are too far away from anything that sets error.
For those call sites, ksft_print_msg() must be used instead.
Convert perror() to ksft_perror() or ksft_print_msg().
Other related changes:
- Remove hash signs
- Remove trailing stops & newlines from ksft_perror()
- Add terminating newlines for converted ksft_print_msg()
- Use consistent capitalization
- Small fixes/tweaks to typos & grammar of the messages
- Extract error printing out of PARENT_EXIT() to be able to
differentiate
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: c44000b653 ("selftests/resctrl: Fix closing IMC fds on error and open-code R+W instead of loops")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 508934b5d1 ]
resctrlfs.c contains mostly functions that interact in some way with
resctrl FS entries while functions inside resctrl_val.c deal with
measurements and benchmarking.
run_benchmark() is located in resctrlfs.c even though it's purpose
is not interacting with the resctrl FS but to execute cache checking
logic.
Move run_benchmark() to resctrl_val.c just before resctrl_val() that
makes use of run_benchmark(). Make run_benchmark() static since it's
not used between multiple files anymore.
Remove return comment from kernel-doc since the function is type void.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: c44000b653 ("selftests/resctrl: Fix closing IMC fds on error and open-code R+W instead of loops")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eef0532e90 ]
Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch
platform, some "Segmentation fault" errors occur:
'''
test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec
test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/1 bpf_tcp_ca/dctcp:FAIL
test_cubic:PASS:bpf_cubic__open_and_load 0 nsec
test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/2 bpf_tcp_ca/cubic:FAIL
test_dctcp_fallback:PASS:dctcp_skel 0 nsec
test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec
test_dctcp_fallback:FAIL:dctcp link unexpected error: -524
#29/4 bpf_tcp_ca/dctcp_fallback:FAIL
test_write_sk_pacing:PASS:open_and_load 0 nsec
test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524
#29/6 bpf_tcp_ca/write_sk_pacing:FAIL
test_update_ca:PASS:open 0 nsec
test_update_ca:FAIL:attach_struct_ops unexpected error: -524
settcpca:FAIL:setsockopt unexpected setsockopt: \
actual -1 == expected -1
(network_helpers.c:99: errno: No such file or directory) \
Failed to call post_socket_cb
start_test:FAIL:start_server_str unexpected start_server_str: \
actual -1 == expected -1
test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \
actual 0 <= expected 0
#29/9 bpf_tcp_ca/update_ca:FAIL
#29 bpf_tcp_ca:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x28)[0x5555567ed91c]
linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0]
./test_progs(bpf_link__update_map+0x80)[0x555556824a78]
./test_progs(+0x94d68)[0x5555564c4d68]
./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88]
./test_progs(+0x3bde54)[0x5555567ede54]
./test_progs(main+0x61c)[0x5555567efd54]
/usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208]
/usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c]
./test_progs(_start+0x48)[0x55555646bca8]
Segmentation fault
'''
This is because BPF trampoline is not implemented on Loongarch yet,
"link" returned by bpf_map__attach_struct_ops() is NULL. test_progs
crashs when this NULL link passes to bpf_link__update_map(). This
patch adds NULL checks for all links in bpf_tcp_ca to fix these errors.
If "link" is NULL, goto the newly added label "out" to destroy the skel.
v2:
- use "goto out" instead of "return" as Eduard suggested.
Fixes: 06da9f3bd6 ("selftests/bpf: Test switching TCP Congestion Control algorithms.")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75d8d7a630 ]
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c8d7598df ]
bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in
commit d79a32129b ("bpf: Selftests, remove prints from sockmap tests"),
now there are only 9 progs in it, not 11:
SEC("sk_skb1")
int bpf_prog1(struct __sk_buff *skb)
SEC("sk_skb2")
int bpf_prog2(struct __sk_buff *skb)
SEC("sk_skb3")
int bpf_prog3(struct __sk_buff *skb)
SEC("sockops")
int bpf_sockmap(struct bpf_sock_ops *skops)
SEC("sk_msg1")
int bpf_prog4(struct sk_msg_md *msg)
SEC("sk_msg2")
int bpf_prog6(struct sk_msg_md *msg)
SEC("sk_msg3")
int bpf_prog8(struct sk_msg_md *msg)
SEC("sk_msg4")
int bpf_prog9(struct sk_msg_md *msg)
SEC("sk_msg5")
int bpf_prog10(struct sk_msg_md *msg)
This patch updates the array sizes of prog_fd[], prog_attach_type[] and
prog_type[] from 11 to 9 accordingly.
Fixes: d79a32129b ("bpf: Selftests, remove prints from sockmap tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9c10d9f974f07fcb354a43a8eca67acb2fafc587.1715926605.git.tanggeliang@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73810cd45b ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f76f9bc616 ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang warns about mismatches between the expected and required
integer length being supplied to abs(3).
Fix this by using the correct variant of abs(3): labs(3) or llabs(3), in
these cases.
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a876346666 ]
Netlink flags, although they don't have payload at the netlink level,
are represented as having "True" as value in pyroute2.
Without it, trying to add a flow with a flag-type action (e.g: pop_vlan)
fails with the following traceback:
Traceback (most recent call last):
File "[...]/ovs-dpctl.py", line 2498, in <module>
sys.exit(main(sys.argv))
^^^^^^^^^^^^^^
File "[...]/ovs-dpctl.py", line 2487, in main
ovsflow.add_flow(rep["dpifindex"], flow)
File "[...]/ovs-dpctl.py", line 2136, in add_flow
reply = self.nlm_request(
^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 822, in nlm_request
return tuple(self._genlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/generic/__init__.py", line 126, in
nlm_request
return tuple(super().nlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 1124, in nlm_request
self.put(msg, msg_type, msg_flags, msg_seq=msg_seq)
File "[...]/pyroute2/netlink/nlsocket.py", line 389, in put
self.sendto_gate(msg, addr)
File "[...]/pyroute2/netlink/nlsocket.py", line 1056, in sendto_gate
msg.encode()
File "[...]/pyroute2/netlink/__init__.py", line 1245, in encode
offset = self.encode_nlas(offset)
^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/__init__.py", line 1560, in encode_nlas
nla_instance.setvalue(cell[1])
File "[...]/pyroute2/netlink/__init__.py", line 1265, in setvalue
nlv.setvalue(nla_tuple[1])
~~~~~~~~~^^^
IndexError: list index out of range
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb708ab9f5 ]
It's slightly better to set _GNU_SOURCE in the source code, but if one
must do it via the compiler invocation, then the best way to do so is
this:
$(CC) -D_GNU_SOURCE=
...because otherwise, if this form is used:
$(CC) -D_GNU_SOURCE
...then that leads the compiler to set a value, as if you had passed in:
$(CC) -D_GNU_SOURCE=1
That, in turn, leads to warnings under both gcc and clang, like this:
futex_requeue_pi.c:20: warning: "_GNU_SOURCE" redefined
Fix this by using the "-D_GNU_SOURCE=" form.
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b6df4c49 ]
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’:
openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4d5f5d2d ]
Fix warnings like:
test_cachestat.c: In function ‘print_cachestat’:
test_cachestat.c:30:38: warning: format ‘%llu’ expects argument of
type ‘long long unsigned int’, but argument 2 has type ‘__u64’ {aka
‘long unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af2b7e5b74 ]
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb709b5f65 ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about three variables that are not initialized in all
cases:
1) The opt_ipproto_off variable is used uninitialized if "testname" is
not "ip". Willem de Bruijn pointed out that this is an actual bug, and
suggested the fix that I'm using here (thanks!).
2) The addr_len is used uninitialized, but only in the assert case,
which bails out, so this is harmless.
3) The family variable in add_listener() is only used uninitialized in
the error case (neither IPv4 nor IPv6 is specified), so it's also
harmless.
Fix by initializing each variable.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240506190204.28497-1-jhubbard@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b3b84aacb ]
As reported by Jose E. Marchesi in off-list discussion, GCC and LLVM
generate slightly different code for dummy_st_ops_success/test_1():
SEC("struct_ops/test_1")
int BPF_PROG(test_1, struct bpf_dummy_ops_state *state)
{
int ret;
if (!state)
return 0xf2f3f4f5;
ret = state->val;
state->val = 0x5a;
return ret;
}
GCC-generated LLVM-generated
---------------------------- ---------------------------
0: r1 = *(u64 *)(r1 + 0x0) 0: w0 = -0xd0c0b0b
1: if r1 == 0x0 goto 5f 1: r1 = *(u64 *)(r1 + 0x0)
2: r0 = *(s32 *)(r1 + 0x0) 2: if r1 == 0x0 goto 6f
3: *(u32 *)(r1 + 0x0) = 0x5a 3: r0 = *(u32 *)(r1 + 0x0)
4: exit 4: w2 = 0x5a
5: r0 = -0xd0c0b0b 5: *(u32 *)(r1 + 0x0) = r2
6: exit 6: exit
If the 'state' argument is not marked as nullable in
net/bpf/bpf_dummy_struct_ops.c, the verifier would assume that
'r1 == 0x0' is never true:
- for the GCC version, this means that instructions #5-6 would be
marked as dead and removed;
- for the LLVM version, all instructions would be marked as live.
The test dummy_st_ops/dummy_init_ret_value actually sets the 'state'
parameter to NULL.
Therefore, when the 'state' argument is not marked as nullable,
the GCC-generated version of the code would trigger a NULL pointer
dereference at instruction #3.
This patch updates the test_1() test case to always follow a shape
similar to the GCC-generated version above, in order to verify whether
the 'state' nullability is marked correctly.
Reported-by: Jose E. Marchesi <jemarch@gnu.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240424012821.595216-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84328c5ace ]
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb2 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e874557fce ]
It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.
Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.
Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.
Fixes: f589234e1a ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2b447c9a1 ]
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.
# dash -c 'ns=client; echo "${ns:0:1}"' 2>error
# cat error
dash: 1: Bad substitution
# bash -c 'ns=client; echo "${ns:0:1}"' 2>error
c
# cat error
This leads to tests that neither pass nor fail.
F.e.
TEST: arp_ping [START]
adding sandbox 'test_arp_ping'
Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
create namespaces
./openvswitch.sh: 282: eval: Bad substitution
TEST: ct_connect_v4 [START]
adding sandbox 'test_ct_connect_v4'
Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
./openvswitch.sh: 322: eval: Bad substitution
create namespaces
Resolve this by making openvswitch.sh a bash script.
Fixes: 918423fda9 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14bb1e8c8d ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f803bcf920 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2114e83381 upstream.
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit
25ae948b44 ("selftests/net: add lib.sh") does not work for tests outside
net/forwarding which source net/forwarding/lib.sh (1). It also does not
work in some cases where only a subset of tests are exported (2).
Avoid the problems mentioned above by replacing the faulty expression with
a copy of the content from net/lib.sh which is used by files under
net/forwarding.
A more thorough solution which avoids duplicating content between
net/lib.sh and net/forwarding/lib.sh has been posted here:
https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/
The approach in the current patch is a stopgap solution to avoid submitting
large changes at the eleventh hour of this development cycle.
Example of problem 1)
tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh
./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory
TEST: bonding cleanup mode active-backup [ OK ]
TEST: bonding cleanup mode 802.3ad [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ]
An error message is printed but since the test does not use functions from
net/lib.sh, the test results are not affected.
Example of problem 2)
tools/testing/selftests$ make install TARGETS="net/forwarding"
tools/testing/selftests$ cd kselftest_install/net/forwarding/
tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3}
lib.sh: line 41: ../lib.sh: No such file or directory
TEST: ping [ OK ]
TEST: ping6 [ OK ]
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
In this case, the test results are affected.
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25ae948b44 upstream.
Add a lib.sh for net selftests. This file can be used to define commonly
used variables and functions. Some commonly used functions can be moved
from forwarding/lib.sh to this lib file. e.g. busywait().
Add function setup_ns() for user to create unique namespaces with given
prefix name.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[PHLin: add lib.sh to TEST_FILES directly as we already have upstream
commit 06efafd8 landed in 6.6.y]
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23a4b108ac upstream.
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e354823 ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40eec1795c upstream.
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a09788c1a upstream.
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f42bdf59b ]
Commit eb50d0f250 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c3c83db1 ]
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d555105271 ]
tools/testing/cxl/test/mem.c uses vmalloc() and vfree() but does not
include linux/vmalloc.h. Kernel v6.10 made changes that causes the
currently included headers not depend on vmalloc.h and therefore
mem.c can no longer compile. Add linux/vmalloc.h to fix compile
issue.
CC [M] tools/testing/cxl/test/mem.o
tools/testing/cxl/test/mem.c: In function ‘label_area_release’:
tools/testing/cxl/test/mem.c:1428:9: error: implicit declaration of function ‘vfree’; did you mean ‘kvfree’? [-Werror=implicit-function-declaration]
1428 | vfree(lsa);
| ^~~~~
| kvfree
tools/testing/cxl/test/mem.c: In function ‘cxl_mock_mem_probe’:
tools/testing/cxl/test/mem.c:1466:22: error: implicit declaration of function ‘vmalloc’; did you mean ‘kmalloc’? [-Werror=implicit-function-declaration]
1466 | mdata->lsa = vmalloc(LSA_SIZE);
| ^~~~~~~
| kmalloc
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20240528225551.1025977-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4202e66a4 ]
Patch series "Fixes for compaction_test", v2.
The compaction_test memory selftest introduces fragmentation in memory
and then tries to allocate as many hugepages as possible. This series
addresses some problems.
On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since
compaction_index becomes 0, which is less than 3, due to no division by
zero exception being raised. We fix that by checking for division by
zero.
Secondly, correctly set the number of hugepages to zero before trying
to set a large number of them.
Now, consider a situation in which, at the start of the test, a non-zero
number of hugepages have been already set (while running the entire
selftests/mm suite, or manually by the admin). The test operates on 80%
of memory to avoid OOM-killer invocation, and because some memory is
already blocked by hugepages, it would increase the chance of OOM-killing.
Also, since mem_free used in check_compaction() is the value before we
set nr_hugepages to zero, the chance that the compaction_index will
be small is very high if the preset nr_hugepages was high, leading to a
bogus test success.
This patch (of 3):
Currently, if at runtime we are not able to allocate a huge page, the test
will trivially pass on Aarch64 due to no exception being raised on
division by zero while computing compaction_index. Fix that by checking
for nr_hugepages == 0. Anyways, in general, avoid a division by zero by
exiting the program beforehand. While at it, fix a typo, and handle the
case where the number of hugepages may overflow an integer.
Link: https://lkml.kernel.org/r/20240521074358.675031-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20240521074358.675031-2-dev.jain@arm.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b7568c49 ]
Every test result report in the compaction test prints a distinct log
messae, and some of the reports print a name that varies at runtime. This
causes problems for automation since a lot of automation software uses the
printed string as the name of the test, if the name varies from run to run
and from pass to fail then the automation software can't identify that a
test changed result or that the same tests are being run.
Refactor the logging to use a consistent name when printing the result of
the test, printing the existing messages as diagnostic information instead
so they are still available for people trying to interpret the results.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-2-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d4202e66a4 ("selftests/mm: compaction_test: fix bogus test success on Aarch64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a71d0908e3 upstream.
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
