IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We need to keep track of the type for a given transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that we fix the XPRT_CONGESTED starvation issue for RDMA as well
as socket based transports.
Ensure we always initialise the request after waking up from the backlog
list.
Fixes: e877a88d1f ("SUNRPC in case of backlog, hand free slots directly to waiting task")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
I've hit some crashes that occur in the xprt_rdma_inject_disconnect
path. It appears that, for some provides, rdma_disconnect() can
take so long that the transport can disconnect and release its
hardware resources while rdma_disconnect() is still running,
resulting in a UAF in the provider.
The transport's fault injection method may depend on the stability
of transport data structures. That means it needs to be invoked
only from contexts that hold the transport write lock.
Fixes: 4a06825839 ("SUNRPC: Transport fault injection")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5eb ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
->buf_free is called nearly once per RPC. Only rarely does
xprt_rdma_free() have to do anything, thus tracing every one of
these calls seems unnecessary. Instead, just throw a trace event
when that one occasional RPC still has MRs that need to be
released.
xprt_rdma_free() is further micro-optimized to reduce the amount of
work done in the common case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These instruments don't appear to add any substantial value.
We already have this at the termination of each RPC:
iozone-2617 [002] 975.713126: rpc_stats_latency: task:418@5 xid=0x260eab5d nfsv3 LOOKUP backlog=15 rtt=32 execute=58
iozone-2617 [002] 975.713127: xprt_release_cong: task:418@5 snd_task:4294967295 cong=256 cwnd=16384
iozone-2617 [002] 975.713127: xprt_put_cong: task:418@5 snd_task:4294967295 cong=0 cwnd=16384
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Introduce a tracepoint in call_allocate that reports the exact
sizes in the RPC buffer allocation request and the status of the
result. This helps catch problems with XDR buffer provisioning,
and replaces transport-specific debugging instrumentation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Both Dan and I have observed two processes invoking
rpcrdma_xprt_disconnect() concurrently. In my case:
1. The connect worker invokes rpcrdma_xprt_disconnect(), which
drains the QP and waits for the final completion
2. This causes the newly posted Receive to flush and invoke
xprt_force_disconnect()
3. xprt_force_disconnect() sets CLOSE_WAIT and wakes up the RPC task
that is holding the transport lock
4. The RPC task invokes xprt_connect(), which calls ->ops->close
5. xprt_rdma_close() invokes rpcrdma_xprt_disconnect(), which tries
to destroy the QP.
Deadlock.
To prevent xprt_force_disconnect() from waking anything, handle the
clean up after a failed connection attempt in the xprt's sndtask.
The retry loop is removed from rpcrdma_xprt_connect() to ensure
that the newly allocated ep and id are properly released before
a REJECTED connection attempt can be retried.
Reported-by: Dan Aloni <dan@kernelim.com>
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Sometimes creating a fresh rpcrdma_ep can fail. That's why
xprt_rdma_connect() always checks if the r_xprt->rx_ep pointer is
valid before dereferencing it. Instead, xprt_rdma_connect() can
simply check rpcrdma_xprt_connect()'s return value.
Also, there's no need to set re_connect_status to zero just after
the rpcrdma_ep is created, since it is allocated with kzalloc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix the following sparse warning:
net/sunrpc/xprtrdma/transport.c:71:14: warning: symbol 'xprt_rdma_slot_table_entries'
was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Hoist create/destroy/disconnect tracepoints out of
xprtrdma and into the generic RPC client. Some benefits include:
- Enable tracing of xprt lifetime events for the socket transport
types
- Expose the different types of disconnect to help run down
issues with lingering connections
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Change the rpcrdma_xprt_disconnect() function so that it no longer
waits for the DISCONNECTED event. This prevents blocking if the
remote is unresponsive.
In rpcrdma_xprt_disconnect(), the transport's rpcrdma_ep is
detached. Upon return from rpcrdma_xprt_disconnect(), the transport
(r_xprt) is ready immediately for a new connection.
The RDMA_CM_DEVICE_REMOVAL and RDMA_CM_DISCONNECTED events are now
handled almost identically.
However, because the lifetimes of rpcrdma_xprt structures and
rpcrdma_ep structures are now independent, creating an rpcrdma_ep
needs to take a module ref count. The ep now owns most of the
hardware resources for a transport.
Also, a kref is needed to ensure that rpcrdma_ep sticks around
long enough for the cm_event_handler to finish.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I eventually want to allocate rpcrdma_ep separately from struct
rpcrdma_xprt so that on occasion there can be more than one ep per
xprt.
The new struct rpcrdma_ep will contain all the fields currently in
rpcrdma_ia and in rpcrdma_ep. This is all the device and CM settings
for the connection, in addition to per-connection settings
negotiated with the remote.
Take this opportunity to rename the existing ep fields from rep_* to
re_* to disambiguate these from struct rpcrdma_rep.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up:
The upper layer serializes calls to xprt_rdma_close, so there is no
need for an atomic bit operation, saving 8 bytes in rpcrdma_ia.
This enables merging rpcrdma_ia_remove directly into the disconnect
logic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move rdma_cm_id creation into rpcrdma_ep_create() so that it is now
responsible for allocating all per-connection hardware resources.
With this clean-up, all three arms of the switch statement in
rpcrdma_ep_connect are exactly the same now, thus the switch can be
removed.
Because device removal behaves a little differently than
disconnection, there is a little more work to be done before
rpcrdma_ep_destroy() can release the connection's rdma_cm_id. So
it is not quite symmetrical with rpcrdma_ep_create() yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Simplify the synopses of functions in the connect and
disconnect paths in preparation for combining the rpcrdma_ia and
struct rpcrdma_ep structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Simplify the synopses of functions in the post_send path
by combining the struct rpcrdma_ia and struct rpcrdma_ep arguments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor rpcrdma_ep_create(), rpcrdma_ep_disconnect(), and
rpcrdma_ep_destroy().
rpcrdma_ep_create will be invoked at connect time instead of at
transport set-up time. It will be responsible for allocating per-
connection resources. In this patch it allocates the CQs and
creates a QP. More to come.
rpcrdma_ep_destroy() is the inverse functionality that is
invoked at disconnect time. It will be responsible for releasing
the CQs and QP.
These changes should be safe to do because both connect and
disconnect is guaranteed to be serialized by the transport send
lock.
This takes us another step closer to resolving the address and route
only at connect time so that connection failover to another device
will work correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To support device hotplug and migrating a connection between devices
of different capabilities, we have to guarantee that all in-kernel
devices can support the same max NFS payload size (1 megabyte).
This means that possibly one or two in-tree devices are no longer
supported for NFS/RDMA because they cannot support 1MB rsize/wsize.
The only one I confirmed was cxgb3, but it has already been removed
from the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: there is no need to keep two copies of the same value.
Also, in subsequent patches, rpcrdma_ep_create() will be called in
the connect worker rather than at set-up time.
Minor fix: Initialize the transport's sendctx to the value based on
the capabilities of the underlying device, not the maximum setting.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For debugging, the op_connect trace point should report the computed
connect delay. We can then ensure that the delay is computed at the
proper times, for example.
As a further clean-up, remove a few low-value "heartbeat" trace
points in the connect path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pending tasks are currently never awoken when the connect worker
fails. The reason is that XPRT_CONNECTED is always clear after a
failure return of rpcrdma_ep_connect, thus the
xprt_test_and_clear_connected() check in xprt_rdma_connect_worker()
always fails.
- xprt_rdma_close always clears XPRT_CONNECTED.
- rpcrdma_ep_connect always clears XPRT_CONNECTED.
After reviewing the TCP connect worker, it appears that there's no
need for extra test_and_set paranoia in xprt_rdma_connect_worker.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up/code de-duplication.
Nit: RPC_CWNDSHIFT is incorrect as the initial value for xprt->cwnd.
This mistake does not appear to have operational consequences, since
the cwnd value is replaced with a valid value upon the first Receive
completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This is because xprt_request_get_cong() is allowing more than one
RPC Call to be transmitted before the first Receive on the new
connection. The first Receive fills the Receive Queue based on the
server's credit grant. Before that Receive, there is only a single
Receive WR posted because the client doesn't know the server's
credit grant.
Solution is to clear rq_cong on all outstanding rpc_rqsts when the
the cwnd is reset. This is because an RPC/RDMA credit is good for
one connection instance only.
Fixes: 75891f502f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that the re-establishment delay does not grow exponentially
on each good reconnect. This probably should have been part of
commit 675dd90ad0 ("xprtrdma: Modernize ops->connect").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The function name should match the documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 48be539dd4 ("xprtrdma: Introduce ->alloc_slot call-out for
xprtrdma") added a separate alloc_slot and free_slot to the RPC/RDMA
transport. Later, commit 75891f502f ("SUNRPC: Support for
congestion control when queuing is enabled") modified the generic
alloc/free_slot methods, but neglected the methods in xprtrdma.
Found via code review.
Fixes: 75891f502f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Merge yet more updates from Andrew Morton:
"The rest of MM and a kernel-wide procfs cleanup.
Summary of the more significant patches:
- Patch series "mm/memory_hotplug: Factor out memory block
devicehandling", v3. David Hildenbrand.
Some spring-cleaning of the memory hotplug code, notably in
drivers/base/memory.c
- "mm: thp: fix false negative of shmem vma's THP eligibility". Yang
Shi.
Fix /proc/pid/smaps output for THP pages used in shmem.
- "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit.
Bugfix and speedup for kernel/resource.c
- Patch series "mm: Further memory block device cleanups", David
Hildenbrand.
More spring-cleaning of the memory hotplug code.
- Patch series "mm: Sub-section memory hotplug support". Dan
Williams.
Generalise the memory hotplug code so that pmem can use it more
completely. Then remove the hacks from the libnvdimm code which
were there to work around the memory-hotplug code's constraints.
- "proc/sysctl: add shared variables for range check", Matteo Croce.
We have about 250 instances of
int zero;
...
.extra1 = &zero,
in the tree. This is a tree-wide sweep to make all those private
"zero"s and "one"s use global variables.
Alas, it isn't practical to make those two global integers const"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits)
proc/sysctl: add shared variables for range check
mm: migrate: remove unused mode argument
mm/sparsemem: cleanup 'section number' data types
libnvdimm/pfn: stop padding pmem namespaces to section alignment
libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields
mm/devm_memremap_pages: enable sub-section remap
mm: document ZONE_DEVICE memory-model implications
mm/sparsemem: support sub-section hotplug
mm/sparsemem: prepare for sub-section ranges
mm: kill is_dev_zone() helper
mm/hotplug: kill is_dev_zone() usage in __remove_pages()
mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap()
mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal
mm/sparsemem: add helpers track active portions of a section at boot
mm/sparsemem: introduce a SECTION_IS_EARLY flag
mm/sparsemem: introduce struct mem_section_usage
drivers/base/memory.c: get rid of find_memory_block_hinted()
mm/memory_hotplug: move and simplify walk_memory_blocks()
mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns
mm: make register_mem_sect_under_node() static
...
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.
On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.
The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:
$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248
Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.
This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:
# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%
[mcroce@redhat.com: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a per-transport maximum limit in the socket case, and add
helpers to allow the NFSv4 code to discover that limit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Adapt and apply changes that were made to the TCP socket connect
code. See the following commits for details on the purpose of
these changes:
Commit 7196dbb02e ("SUNRPC: Allow changing of the TCP timeout parameters on the fly")
Commit 3851f1cdb2 ("SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout")
Commit 02910177ae ("SUNRPC: Fix reconnection timeouts")
Some common transport code is moved to xprt.c to satisfy the code
duplication police.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
There is only one remaining function, rpcrdma_buffer_put(), that
uses this field. Its caller can supply a pointer to the correct
rpcrdma_buffer, enabling the removal of an 8-byte pointer field
from a frequently-allocated shared data structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Eliminate a context switch in the path that handles RPC wake-ups
when a Receive completion has to wait for a Send completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 9590d083c1 ("xprtrdma: Use xprt_pin_rqst in
rpcrdma_reply_handler") pins incoming RPC/RDMA replies so they
can be left in the pending requests queue while they are being
processed without introducing a race between ->buf_free and the
transport's reply handler. Therefore RPCRDMA_REQ_F_PENDING is no
longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Move the remaining field in rpcrdma_create_data_internal so the
structure can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
The inline settings are actually a characteristic of the endpoint,
and not related to the device. They are also modified after the
transport instance is created, so they do not belong in the cdata
structure either.
Lastly, let's use names that are more natural to RDMA than to NFS:
inline_write -> inline_send and inline_read -> inline_recv. The
/proc files retain their names to avoid breaking user space.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
xprt_rdma_max_inline_{read,write} cannot be set to large values
by virtue of proc_dointvec_minmax. The current maximum is
RPCRDMA_MAX_INLINE, which is much smaller than RPCRDMA_MAX_SEGS *
PAGE_SIZE.
The .rsize and .wsize fields are otherwise unused in the current
code base, and thus can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up by providing an API to do this common task.
At this point, the difference between rpcrdma_get_sendbuf and
rpcrdma_get_recvbuf has become tiny. These can be collapsed into a
single helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Allocating an rpcrdma_req's regbufs at xprt create time enables
a pair of micro-optimizations:
First, if these regbufs are always there, we can eliminate two
conditional branches from the hot xprt_rdma_allocate path.
Second, by allocating a 1KB buffer, it places a lower bound on the
size of these buffers, without adding yet another conditional
branch. The lower bound reduces the number of hardway re-
allocations. In fact, for some workloads it completely eliminates
hardway allocations.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Allocate the struct rpcrdma_regbuf separately from the I/O buffer
to better guarantee the alignment of the I/O buffer and eliminate
the wasted space between the rpcrdma_regbuf metadata and the buffer
itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Convert the transport callback to actually put the request to sleep
instead of just setting a timeout. This is in preparation for
rpc_sleep_on_timeout().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
tsh_size was added to accommodate transports that send a pre-amble
before each RPC message. However, this assumes the pre-amble is
fixed in size, which isn't true for some transports. That makes
tsh_size not very generic.
Also I'd like to make the estimation of RPC send and receive
buffer sizes more precise. tsh_size doesn't currently appear to be
accounted for at all by call_allocate.
Therefore let's just remove the tsh_size concept, and make the only
transports that have a non-zero tsh_size employ a direct approach.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Note that there is a conflict with the rdma tree in this pull request, since
we delete a file that has been changed in the rdma tree. Hopefully that's
easy enough to resolve!
We also were unable to track down a maintainer for Neil Brown's changes to
the generic cred code that are prerequisites to his RPC cred cleanup patches.
We've been asking around for several months without any response, so
hopefully it's okay to include those patches in this pull request.
Stable bugfixes:
- xprtrdma: Yet another double DMA-unmap # v4.20
Features:
- Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG
- Per-xprt rdma receive workqueues
- Drop support for FMR memory registration
- Make port= mount option optional for RDMA mounts
Other bugfixes and cleanups:
- Remove unused nfs4_xdev_fs_type declaration
- Fix comments for behavior that has changed
- Remove generic RPC credentials by switching to 'struct cred'
- Fix crossing mountpoints with different auth flavors
- Various xprtrdma fixes from testing and auditing the close code
- Fixes for disconnect issues when using xprtrdma with krb5
- Clean up and improve xprtrdma trace points
- Fix NFS v4.2 async copy reboot recovery
-----BEGIN PGP SIGNATURE-----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=DvVW
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- xprtrdma: Yet another double DMA-unmap # v4.20
Features:
- Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG
- Per-xprt rdma receive workqueues
- Drop support for FMR memory registration
- Make port= mount option optional for RDMA mounts
Other bugfixes and cleanups:
- Remove unused nfs4_xdev_fs_type declaration
- Fix comments for behavior that has changed
- Remove generic RPC credentials by switching to 'struct cred'
- Fix crossing mountpoints with different auth flavors
- Various xprtrdma fixes from testing and auditing the close code
- Fixes for disconnect issues when using xprtrdma with krb5
- Clean up and improve xprtrdma trace points
- Fix NFS v4.2 async copy reboot recovery"
* tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
sunrpc: convert to DEFINE_SHOW_ATTRIBUTE
sunrpc: Add xprt after nfs4_test_session_trunk()
sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS
sunrpc: handle ENOMEM in rpcb_getport_async
NFS: remove unnecessary test for IS_ERR(cred)
xprtrdma: Prevent leak of rpcrdma_rep objects
NFSv4.2 fix async copy reboot recovery
xprtrdma: Don't leak freed MRs
xprtrdma: Add documenting comment for rpcrdma_buffer_destroy
xprtrdma: Replace outdated comment for rpcrdma_ep_post
xprtrdma: Update comments in frwr_op_send
SUNRPC: Fix some kernel doc complaints
SUNRPC: Simplify defining common RPC trace events
NFS: Fix NFSv4 symbolic trace point output
xprtrdma: Trace mapping, alloc, and dereg failures
xprtrdma: Add trace points for calls to transport switch methods
xprtrdma: Relocate the xprtrdma_mr_map trace points
xprtrdma: Clean up of xprtrdma chunk trace points
xprtrdma: Remove unused fields from rpcrdma_ia
xprtrdma: Cull dprintk() call sites
...
Name them "trace_xprtrdma_op_*" so they can be easily enabled as a
group. No trace point is added where the generic layer already has
observability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Remove dprintk() call sites that report rare or impossible
errors. Leave a few that display high-value low noise status
information.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
