IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
API:
- Optimise away self-test overhead when they are disabled.
- Support symmetric encryption via keyring keys in af_alg.
- Flip hwrng default_quality, the default is now maximum entropy.
Algorithms:
- Add library version of aesgcm.
- CFI fixes for assembly code.
- Add arm/arm64 accelerated versions of sm3/sm4.
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned.
- Fix selftest failures in rockchip.
- Add support for RK3328/RK3399 in rockchip.
- Add deflate support in qat.
- Merge ux500 into stm32.
- Add support for TEE for PCI ID 0x14CA in ccp.
- Add mt7986 support in mtk.
- Add MaxLinear platform support in inside-secure.
- Add NPCM8XX support in npcm.
-----BEGIN PGP SIGNATURE-----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=OpWt
-----END PGP SIGNATURE-----
Merge tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Optimise away self-test overhead when they are disabled
- Support symmetric encryption via keyring keys in af_alg
- Flip hwrng default_quality, the default is now maximum entropy
Algorithms:
- Add library version of aesgcm
- CFI fixes for assembly code
- Add arm/arm64 accelerated versions of sm3/sm4
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned
- Fix selftest failures in rockchip
- Add support for RK3328/RK3399 in rockchip
- Add deflate support in qat
- Merge ux500 into stm32
- Add support for TEE for PCI ID 0x14CA in ccp
- Add mt7986 support in mtk
- Add MaxLinear platform support in inside-secure
- Add NPCM8XX support in npcm"
* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
crypto: ux500/cryp - delete driver
crypto: stm32/cryp - enable for use with Ux500
crypto: stm32 - enable drivers to be used on Ux500
dt-bindings: crypto: Let STM32 define Ux500 CRYP
hwrng: geode - Fix PCI device refcount leak
hwrng: amd - Fix PCI device refcount leak
crypto: qce - Set DMA alignment explicitly
crypto: octeontx2 - Set DMA alignment explicitly
crypto: octeontx - Set DMA alignment explicitly
crypto: keembay - Set DMA alignment explicitly
crypto: safexcel - Set DMA alignment explicitly
crypto: hisilicon/hpre - Set DMA alignment explicitly
crypto: chelsio - Set DMA alignment explicitly
crypto: ccree - Set DMA alignment explicitly
crypto: ccp - Set DMA alignment explicitly
crypto: cavium - Set DMA alignment explicitly
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
crypto: arm64/ghash-ce - use frame_push/pop macros consistently
crypto: arm64/crct10dif - use frame_push/pop macros consistently
crypto: arm64/aes-modes - use frame_push/pop macros consistently
...
- Convert flexible array members, fix -Wstringop-overflow warnings,
and fix KCFI function type mismatches that went ignored by
maintainers (Gustavo A. R. Silva, Nathan Chancellor, Kees Cook).
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(),
add more __alloc_size attributes, and introduce full testing
of all allocator functions. Finally remove the ksize() side-effect
so that each allocation-aware checker can finally behave without
exceptions.
- Introduce oops_limit (default 10,000) and warn_limit (default off)
to provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook).
- Introduce overflows_type() and castable_to_type() helpers for
cleaner overflow checking.
- Improve code generation for strscpy() and update str*() kern-doc.
- Convert strscpy and sigphash tests to KUnit, and expand memcpy
tests.
- Always use a non-NULL argument for prepare_kernel_cred().
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell).
- Adjust orphan linker section checking to respect CONFIG_WERROR
(Xin Li).
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu).
- Fix um vs FORTIFY warnings for always-NULL arguments.
-----BEGIN PGP SIGNATURE-----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=yaaN
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
GCC gets confused about the return value of get_cpu_var() possibly
being NULL, so explicitly test for it before calls to memcpy() and
memset(). Avoids warnings like this:
arch/um/drivers/virt-pci.c: In function 'um_pci_send_cmd':
include/linux/fortify-string.h:48:33: warning: argument 1 null where non-null expected [-Wnonnull]
48 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:438:9: note: in expansion of macro '__underlying_memcpy'
438 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:483:26: note: in expansion of macro '__fortify_memcpy_chk'
483 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
arch/um/drivers/virt-pci.c💯9: note: in expansion of macro 'memcpy'
100 | memcpy(buf, cmd, cmd_size);
| ^~~~~~
While at it, avoid literal "8" and use stored sizeof(buf->data) in
memset() and um_pci_send_cmd().
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211271212.SUZSC9f9-lkp@intel.com
Fixes: ba38961a06 ("um: Enable FORTIFY_SOURCE")
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: linux-um@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Most hw_random devices return entropy which is assumed to be of full
quality, but driver authors don't bother setting the quality knob. Some
hw_random devices return less than full quality entropy, and then driver
authors set the quality knob. Therefore, the entropy crediting should be
opt-out rather than opt-in per-driver, to reflect the actual reality on
the ground.
For example, the two Raspberry Pi RNG drivers produce full entropy
randomness, and both EDK2 and U-Boot's drivers for these treat them as
such. The result is that EFI then uses these numbers and passes the to
Linux, and Linux credits them as boot, thereby initializing the RNG.
Yet, in Linux, the quality knob was never set to anything, and so on the
chance that Linux is booted without EFI, nothing is ever credited.
That's annoying.
The same pattern appears to repeat itself throughout various drivers. In
fact, very very few drivers have bothered setting quality=1024.
Looking at the git history of existing drivers and corresponding mailing
list discussion, this conclusion tracks. There's been a decent amount of
discussion about drivers that set quality < 1024 -- somebody read and
interepreted a datasheet, or made some back of the envelope calculation
somehow. But there's been very little, if any, discussion about most
drivers where the quality is just set to 1024 or unset (or set to 1000
when the authors misunderstood the API and assumed it was base-10 rather
than base-2); in both cases the intent was fairly clear of, "this is a
hardware random device; it's fine."
So let's invert this logic. A hw_random struct's quality knob now
controls the maximum quality a driver can produce, or 0 to specify 1024.
Then, the module-wide switch called "default_quality" is changed to
represent the maximum quality of any driver. By default it's 1024, and
the quality of any particular driver is then given by:
min(default_quality, rng->quality ?: 1024);
This way, the user can still turn this off for weird reasons (and we can
replace whatever driver-specific disabling hacks existed in the past),
yet we get proper crediting for relevant RNGs.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
What a zoo:
PCI_MSI
select GENERIC_MSI_IRQ
PCI_MSI_IRQ_DOMAIN
def_bool y
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects
GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are
just an indirection to PCI_MSI.
Match the reality and just admit that PCI_MSI requires
GENERIC_MSI_IRQ_DOMAIN.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de
Currently the panic notifiers from user mode linux don't follow
the convention for most of the other notifiers present in the
kernel (indentation, priority setting, numeric return).
More important, the priorities could be improved, since it's a
special case (userspace), hence we could run the notifiers earlier;
user mode linux shouldn't care much with other panic notifiers but
the ordering among the mconsole and arch notifier is important,
given that the arch one effectively triggers a core dump.
Fix that by running the mconsole notifier as the first panic
notifier, followed by the architecture one (that coredumps).
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
V3:
- No changes.
V2:
- Kept the notifier header to avoid implicit usage - thanks
Johannes for the suggestion!
Signed-off-by: Richard Weinberger <richard@nod.at>
All uses of reactivate_chan() were removed by
commit 940b241d90 ("um: Remove obsolete reenable_XX
calls"), so remove the declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is activated, the user mode
linux virtio irq handler only read one msg from the corresponding socket.
This creates issues, when the device emulation creates multiple call
requests (e.g. for multiple virtqueues), as the socket buffer tend to fill
up and the call requests are delayed.
This creates a deadlock situation, when the device simulation blocks,
because of sending a msg and the kernel side blocks because of
synchronously waiting for an acknowledge of kick request.
Actually inband notifications are meant to be used in combination with the
time travel protocol, but it is not required, therefore this corner case
needs to be handled.
Anyways, in general it seems to be more natural to consume always all
messages from a socket, instead of only a single one.
Fixes: 2cd097ba8c ("um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ")
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit a10fba0377: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba0377 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
A huge patchset supporting vq resize using the
new vq reset capability.
Features, fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmL2F9APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp00QIAKpxyu+zCtrdDuh68DsNn1Cu0y0PXG336ySy
MA1ck/bv94MZBIbI/Bnn3T1jDmUqTFHJiwaGz/aZ5gGAplZiejhH5Ds3SYjHckaa
MKeJ4FTXin9RESP+bXhv4BgZ+ju3KHHkf1jw3TAdVKQ7Nma1u4E6f8nprYEi0TI0
7gLUYenqzS7X1+v9O3rEvPr7tSbAKXYGYpV82sSjHIb9YPQx5luX1JJIZade8A25
mTt5hG1dP1ugUm1NEBPQHjSvdrvO3L5Ahy0My2Bkd77+tOlNF4cuMPt2NS/6+Pgd
n6oMt3GXqVvw5RxZyY8dpknH5kofZhjgFyZXH0l+aNItfHUs7t0=
=rIo2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
find_vqs() adds a new parameter sizes to specify the size of each vq
vring.
NULL as sizes means that all queues in find_vqs() use the maximum size.
A value in the array is 0, which means that the corresponding queue uses
the maximum size.
In the split scenario, the meaning of size is the largest size, because
it may be limited by memory, the virtio core will try a smaller size.
And the size is power of 2.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net can display the maximum (supported by hardware) ring size in
ethtool -g eth0.
When the subsequent patch implements vring reset, it can judge whether
the ring size passed by the driver is legal based on this.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- KASAN support for x86_64
- noreboot command line option, just like qemu's -no-reboot
- Various fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=f3Bh
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- KASAN support for x86_64
- noreboot command line option, just like qemu's -no-reboot
- Various fixes and cleanups
* tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: include sys/types.h for size_t
um: Replace to_phys() and to_virt() with less generic function names
um: Add missing apply_returns()
um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups
um: include linux/stddef.h for __always_inline
UML: add support for KASAN under x86_64
mm: Add PAGE_ALIGN_DOWN macro
um: random: Don't initialise hwrng struct with zero
um: remove unused mm_copy_segments
um: remove unused variable
um: Remove straying parenthesis
um: x86: print RIP with symbol
arch: um: Fix build for statically linked UML w/ constructors
x86/um: Kconfig: Fix indentation
um/drivers: Kconfig: Fix indentation
um: Kconfig: Fix indentation
Initialising the hwrng struct with zeros causes a
compile-time sparse warning:
$ ARCH=um make -j10 W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
...
CHECK arch/um/drivers/random.c
arch/um/drivers/random.c:31:31: sparse: warning: Using plain integer as NULL pointer
Fix the warning by not initialising the hwrng struct
with zeros as it is initialised anyway during module
init.
Fixes: 72d3e093af ("um: random: Register random as hwrng-core device")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Improve static type checking by using type enum req_op instead of int where
appropriate.
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-21-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the
virtqueues in the probe function. (The virtio core sets the device
ready when probe returns.)
Fixes: 8b4ec69d7e ("virtio: harden vring IRQ")
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
- Various cleanups and fixes: xterm, serial line, time travel
- Set ARCH_HAS_GCOV_PROFILE_ALL
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmKZz4UWHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wRrZD/951tWxCjNiSZYL8B32YnaxqJLf
vwDwXWxYbXmtLgVhqTGCQ61qNFhKnGVeyfO2niacB5EB3VFzxtB2dXTswDpcu/93
o99/Dozisehcn9L3CbGO0sKCxKZbdgP4TQPOGQpr8lyzv9NlmNF/bgkiH8s8rIB/
ACaiKmLrAVIyQz/8VElFqJNyB/RkmcILks//jVidFlueZhmYMSzbfdVDFyTDDJMA
JEmIz+SG2hg15yCy620EpWgskHvSQSNhWMv4wxJVy4XRdZ7nztb9babV3lIaRmaI
8rBR+DsLGlDeep3SOv63giFzjMjHpXcAlJ0UoefkaRA4htSP4GmyDPHX6Fo6ilW4
fQ52lxsHmP+6fLmWNOnFjsvk93z9u3XU55ReEhP1PGzgAGDNUczy8BEYvb6l0Weq
M8BdYgU2nh/SA0ycmXdSVbyl7nFST5s0lHr6hEt22CMxJ+jz6WS650vrnH2JimMX
bnJMcEYX6PeyDq4lTYyrWOCdzPTorT6eEcn/BM3qKgWkosK0FlN+nnT0HOef5Bag
jezo4/dt/VPfftKQS28Waufud/nnJD2oFAvFBG0/YHTooTZMkSnH2LnRbYkFo7vS
xkDRnHJGSDOaxzdSfgNlwveqZ/qTgjNs1CUYHBrs2Tj1dJicqro+wWjZg8qzCHI+
8YgCQjaEOYLN6CN0CA==
=hD4o
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Various cleanups and fixes: xterm, serial line, time travel
- Set ARCH_HAS_GCOV_PROFILE_ALL
* tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix out-of-bounds read in LDT setup
um: chan_user: Fix winch_tramp() return value
um: virtio_uml: Fix broken device handling in time-travel
um: line: Use separate IRQs per line
um: Enable ARCH_HAS_GCOV_PROFILE_ALL
um: Use asm-generic/dma-mapping.h
um: daemon: Make default socket configurable
um: xterm: Make default terminal emulator configurable
The previous fix here was only partially correct, it did
result in returning a proper error value in case of error,
but it also clobbered the pid that we need to return from
this function (not just zero for success).
As a result, it returned 0 here, but later this is treated
as a pid and used to kill the process, but since it's now
0 we kill(0, SIGKILL), which makes UML kill itself rather
than just the helper thread.
Fix that and make it more obvious by using a separate
variable for the pid.
Fixes: ccf1236eca ("um: fix error return code in winch_tramp()")
Reported-and-tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
If a device implementation crashes, virtio_uml will mark it
as dead by calling virtio_break_device() and scheduling the
work that will remove it.
This still seems like the right thing to do, but it's done
directly while reading the message, and if time-travel is
used, this is in the time-travel handler, outside of the
normal Linux machinery. Therefore, we cannot acquire locks
or do normal "linux-y" things because e.g. lockdep will be
confused about the context.
Move handling this situation out of the read function and
into the actual IRQ handler and response handling instead,
so that in the case of time-travel we don't call it in the
wrong context.
Chances are the system will still crash immediately, since
the device implementation crashing may also cause the time-
travel controller to go down, but at least all of that now
happens without strange warnings from lockdep.
Fixes: c8177aba37 ("um: time-travel: rework interrupt handling in ext mode")
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Today, all possible serial lines (ssl*=) as well as all
possible consoles (con*=) each share a single interrupt
(with a fixed number) with others of the same type.
Now, if you have two lines, say ssl0 and ssl1, and one
of them is connected to an fd you cannot read (e.g. a
file), but the other gets a read interrupt, then both
of them get the interrupt since it's shared. Then, the
read() call will return EOF, since it's a file being
written and there's nothing to read (at least not at
the current offset, at the end).
Unfortunately, this is treated as a read error, and we
close this line, losing all the possible output.
It might be possible to work around this and make the
IRQ sharing work, however, now that we have dynamically
allocated IRQs that are easy to use, simply use that to
achieve separating between the events; then there's no
interrupt for that line and we never attempt the read
in the first place, thus not closing the line.
This manifested itself in the wifi hostap/hwsim tests
where the parallel script communicates via one serial
console and the kernel messages go to another (a file)
and sending data on the communication console caused
the kernel messages to stop flowing into the file.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Even if daemon network is deprecated, some configurations may
still use it (e.g. Debian), and not want to default to the
/tmp/uml.ctl socket location. Allow configuring the default
socket location.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-by: Ritesh Raj Sarraf <ritesh@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Make the default terminal emulator configurable so e.g.
Debian can set it to x-terminal-emulator instead of the
current default of xterm.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-by: Ritesh Raj Sarraf <ritesh@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
UM's netdev driver uses a custom napi weight, switch to the new
API for setting custom weight.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The discard_alignment queue limit is named a bit misleading means the
offset into the block device at which the discard granularity starts.
Setting it to the discard granularity as done by ubd is mostly harmless
but also useless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check if port-helper exists and is executable. If not, write an error
message to the kernel log with information to help the user diagnose the
issue and exit with an error. If UML_PORT_HELPER was not set, write a
message suggesting that the user set it. This makes it easier to understand
why telneting to the UML instance is failing and what can be done to fix it.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This is useful when the uml-utilities user-space package has not been
installed by the administrator and an unprivileged user wants to be able to
telnet into a UML instance. The user can install the port-helper binary to
a writable path and set UML_PORT_HELPER. Fallback to using hardcoded path to
port-helper if environment variable is not set.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This allows in.telnetd to be run from non-standard installation locations
and is especially useful when running a UML instance as an unprivileged user
on a system where the administrator has not installed the in.telnetd binary.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Moving to an EPOLL based IRQ controller broke uml_mconsole stop/go
commands. This fixes it and restores stop/go functionality.
Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since the constification of MAC addresses, the argument
to uml_vector_default_bpf() must be const.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Call to fallocate with FALLOC_FL_PUNCH_HOLE on a device backed by a sparse
file can end up by missing data, zeroes data range, if the underlying file
is used with a tool like bmaptool which will referenced only used spaces.
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Migrate UML vector drivers from a bespoke scheduling mechanism
to NAPI.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
partial support for < MAX_ORDER - 1 granularity for virtio-mem
driver_override for vdpa
sysfs ABI documentation for vdpa
multiqueue config support for mlx5 vdpa
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHiDHkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpVT4H/3Veixt3uYPOmuLU2tSx+8X+sFTtik81hyiE
okz5fRJrxxA8SqS76FnmO10FS4hlPOGNk0Z5WVhr0yihwFvPLvpCM/xi2Lmrz9I7
pB0sXOIocEL1xApsxukR9K1Twpb2hfYsflbJYUVlRfhS5G0izKJNZp5I7OPrzd80
vVNNDWKW2iLDlfqsavumI4Kvm4nsFuCHG03jzMtcIa7YTXYV3DORD4ZGFFVUOIQN
t5F74TznwHOeYgJeg7TzjFjfPWmXjLetvx10QX1A1uOvwppWW/QY6My0UafTXNXj
VB3gOwJPf+gxXAXl/4bafq4NzM0xys6cpcPpjvhmU+erY4UuyAU=
=Y1eO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- set_fs removal
- Devicetree support
- Many cleanups from Al
- Various virtio and build related fixes
-----BEGIN PGP SIGNATURE-----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=5J6E
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- set_fs removal
- Devicetree support
- Many cleanups from Al
- Various virtio and build related fixes
* tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (31 commits)
um: virtio_uml: Allow probing from devicetree
um: Add devicetree support
um: Extract load file helper from initrd.c
um: remove set_fs
hostfs: Fix writeback of dirty pages
um: Use swap() to make code cleaner
um: header debriding - sigio.h
um: header debriding - os.h
um: header debriding - net_*.h
um: header debriding - mem_user.h
um: header debriding - activate_ipi()
um: common-offsets.h debriding...
um, x86: bury crypto_tfm_ctx_offset
um: unexport handle_page_fault()
um: remove a dangling extern of syscall_trace()
um: kill unused cpu()
uml/i386: missing include in barrier.h
um: stop polluting the namespace with registers.h contents
logic_io instance of iounmap() needs volatile on argument
um: move amd64 variant of mmap(2) to arch/x86/um/syscalls_64.c
...
Allow the virtio_uml device to be probed from the devicetree so that
sub-devices can be specified using the standard virtio bindings, for
example:
virtio@1 {
compatible = "virtio,uml";
socket-path = "i2c.sock";
virtio-device-id = <0x22>;
i2c-controller {
compatible = "virtio,device22";
#address-cells = <0x01>;
#size-cells = <0x00>;
light-sensor@01 {
compatible = "ti,opt3001";
reg = <0x01>;
};
};
};
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When creating an external event, the current time needs to
be propagated to other participants of a simulation. This
is done in the places here where we kick a virtq etc.
However, it must be done for _all_ external events, and
that includes making the initial socket connection and
later closing it. Call time_travel_propagate_time() to do
this before making or closing the socket connection.
Apparently, at least for the initial connection creation,
due to the remote side in my use cases using microseconds
(rather than nanoseconds), this wasn't a problem yet; only
started failing between 5.14-rc1 and 5.15-rc1 (didn't test
others much), or possibly depending on the configuration,
where more delays happen before the virtio devices are
initialized.
Fixes: 88ce642492 ("um: Implement time-travel=ext")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
There were a few 32-bit compile warnings that of course
turned into errors with -Werror, fix the 32-bit build.
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add two new parameters kernel_ringparam and extack for
.get_ringparam and .set_ringparam to extend more ring params
through netlink.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it go through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
ubd_disk_register() never returned an error, so just fix
that now and let the caller handle the error condition.
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211015233028.2167651-8-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
