IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback. With
devm_pwmchip_add() pwmchip_remove() can be dropped. Then the remove
callback is empty and can go away, too.
Link: https://lore.kernel.org/r/20230718175545.3946935-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The semantic of chip_data is a bit surprising as it's cleared when
pwm_put() is called. Also there is a big overlap with the standard driver
data.
All drivers were adapted to not make use of chip_data any more, so it can
go away.
Link: https://lore.kernel.org/r/20230705080650.2353391-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of an allocation of a single u16 per channel, allocate them all in
a single chunk which greatly reduces memory fragmentation and also the
overhead to track the allocated memory. Also put the channel data in
driver data where it's cheaper to determine the address (no function call
involved, just a trivial pointer addition).
This also allows to get rid of the request and free callbacks.
The only cost is that the channel data is allocated early, and even for
unused channels.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20230705080650.2353391-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of using one allocation per capture channel, use a single one. Also
store it in driver data instead of chip data.
This has several advantages:
- driver data isn't cleared when pwm_put() is called
- Reduces memory fragmentation
Also register the pwm chip only after the per capture channel data is
initialized as the capture callback relies on this initialization and it
might be called even before pwmchip_add() returns.
It would be still better to have struct sti_pwm_compat_data and the
per-channel data struct sti_cpt_ddata in a single memory chunk, but that's
not easily possible because the number of capture channels isn't known yet
when the driver data struct is allocated.
Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()")
Reported-by: George Stark <gnstark@sberdevices.ru>
Fixes: c97267ae831d ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20230705080650.2353391-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of distributing the driver's bookkeeping over 5 (i.e.
TPU_CHANNEL_MAX + 1) separately allocated memory chunks, put all together
in struct tpu_device. This reduces the number of memory allocations and
so fragmentation and maybe even the number of cache misses. Also
&tpu->tpd[pwm->hwpwm] is cheaper to evaluate than pwm_get_chip_data(pwm)
as the former is just an addition in machine code while the latter involves
a function call.
Link: https://lore.kernel.org/r/20230705080650.2353391-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of distributing the driver's bookkeeping over 3 (i.e.
LP3943_NUM_PWMS + 1) separately allocated memory chunks, put all together
in struct lp3943_pwm. This reduces the number of memory allocations and
so fragmentation and maybe even the number of cache misses. Also
&lp3943_pwm->pwm_map[pwm->hwpwm] is cheaper to evaluate than
pwm_get_chip_data(pwm) as the former is just an addition in machine code
while the latter involves a function call.
Link: https://lore.kernel.org/r/20230705080650.2353391-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stop using chip_data which is about to go away. Instead track the
per-channel clk in struct jz4740_pwm_chip.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230705080650.2353391-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of allocating extra data in .request() provide the needed memory
in struct samsung_pwm_chip. This reduces the number of allocations. Even
though now all 5 channel structs are allocated this is probably
outweighed by the reduced overhead to track up to 6 smaller allocations.
Link: https://lore.kernel.org/r/20230705080650.2353391-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of allocating extra data in .request() provide the needed memory
in struct berlin_pwm_chip. This reduces the number of allocations. A
side effect is that on suspend and resume the state for all four
channels is always saved and restored. This is easier (and probably
quicker) than looking up the matching pwm_device and checking its
PWMF_REQUESTED bit.
Link: https://lore.kernel.org/r/20230705080650.2353391-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver compiles just fine as a module. The parent driver's Kconfig
symbol already depends on X86 || COMPILE_TEST, so X86 can just be
dropped from the dependencies allowing compilation on other platforms
than x86.
Link: https://lore.kernel.org/r/20230804142707.412137-3-u.kleine-koenig@pengutronix.de
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of requiring each driver to care for assigning the owner member
of struct pwm_ops, handle that implicitly using a macro. Note that the
owner member has to be moved to struct pwm_chip, as the ops structure
usually lives in read-only memory and so cannot be modified.
The upside is that new low level drivers cannot forget the assignment and
save one line each. The pwm-crc driver didn't assign .owner, that's not
a problem in practice though as the driver cannot be compiled as a
module.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti
Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip
Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld
Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most but not all pointers to driver data are already called "jz":
$ git grep 'struct jz4740_pwm_chip \*' v6.5-rc1 -- drivers/pwm/pwm-jz4740.c
v6.5-rc1:drivers/pwm/pwm-jz4740.c:static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
v6.5-rc1:drivers/pwm/pwm-jz4740.c:static bool jz4740_pwm_can_use_chn(struct jz4740_pwm_chip *jz,
v6.5-rc1:drivers/pwm/pwm-jz4740.c: struct jz4740_pwm_chip *jz = to_jz4740(chip);
v6.5-rc1:drivers/pwm/pwm-jz4740.c: struct jz4740_pwm_chip *jz = to_jz4740(chip);
v6.5-rc1:drivers/pwm/pwm-jz4740.c: struct jz4740_pwm_chip *jz = to_jz4740(chip);
v6.5-rc1:drivers/pwm/pwm-jz4740.c: struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
v6.5-rc1:drivers/pwm/pwm-jz4740.c: struct jz4740_pwm_chip *jz4740;
Adapt the two variables called "jz4740" to use the same name for
consistency.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230808062608.897710-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
PWM driver to use the new symbol.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This contains various cleanups and fixes across the board.
-----BEGIN PGP SIGNATURE-----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=kax5
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3d2813fb17e5 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
For all resources used by the driver there is a devm variant to allocate
these. This simplifies the error path in the probe callback and allows
to drop the remove callback.
While at it also use dev_err_probe() to compact returning an error.
With the remove callback gone, there is no user of driver data left, so
the call to platform_set_drvdata() can also be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Before the pwm framework implementedatomic updates (with the .apply()
callback) the .disable() callback returned void. This is still visible
in the stmpe driver which drops errors in the disable path.
Improve the driver to forward failures in stmpe_24xx_pwm_disable() to
the caller of pwm_apply_state().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This allows to drop the platform_driver's remove function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
pwmchip_add() calls of_pwmchip_add() only after adding the chip to
pwm_chips and releasing pwm_lock. So the proper order in
pwmchip_remove() is to call of_pwmchip_remove() before taking the mutex
and removing the chip from pwm_chips. This way pwmchip_remove() releases
the resources in reverse order compared to pwmchip_add() requesting
them.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Compared to overwriting pdev->dev.of_node directly, this takes care of
reference counting. It also prevents that the parent device matches this
driver. See commit 9b22c17a3cc5 ("of: Check 'of_node_reused' flag on
of_match_device()") for further details.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.dev is assigned in .probe() and never read. So it serves no purpose and
can be removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Apart from the return type pxa_pwm_get_id_dt() reimplements
of_device_get_match_data(). Drop the former and replace the call to it
by the latter.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
struct atmel_tcb_pwm_device::polarity is only used in atmel_tcb_pwm_enable
and atmel_tcb_pwm_disable(). These functions are only called by
atmel_tcb_pwm_apply() after the member variable was assigned to
state->polarity. So the value assigned in atmel_tcb_pwm_request() is
never used and the member can be dropped from struct atmel_tcb_pwm_device.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
atmel_tcb_pwm_set_polarity() is only called once and effectively wraps
an assignment only. Replace the function call by the respective
assignment.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This simplifies the code, reduces the number of memory allocations and
pointer dereferences.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Several resources were not freed in the error path and the remove
function. Add the forgotten items.
Fixes: 34cbcd72588f ("pwm: atmel-tcb: Add sama5d2 support")
Fixes: 061f8572a31c ("pwm: atmel-tcb: Switch to new binding")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Allocate driver data as first resource in the probe function. This way it
can be used during allocation of the other resources (instead of assigning
these to local variables first and update driver data only when it's
allocated). Also as driver data is allocated using a devm function this
should happen first to have the order of freeing resources in the error
path and the remove function in reverse.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
core.c doens't use any of the symbols provided by linux/radix-tree.h
and compiles just fine without this include. So drop the #include.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Fix the below build warning:
warning: Function parameter or member 'num_channel_ios' not described
in 'rz_mtu3_channel_io_map'
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
pwmchip_remove() returns void since some time but the documentation still
mentions the situations where it used to return an error code. Just remove
this old and now wrong text.
Fixes: 8083f58d08fd ("pwm: Make pwmchip_remove() return void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver would never call clk_enable() if the PWM channel was already
enabled in bootloader which lead to dump the warning message "the PWM
clock already disabled" when turning off the PWM channel.
Add atmel_pwm_enable_clk_if_on() in probe function to enable clock if
the PWM channel was already enabled in bootloader.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Nearly all PWM drivers use the name "chip" for the member in the driver
struct pointing to the pwm_chip. Also all local variables and function
parameters with this type use this name. Rename the struct pwm_chip
member accordingly for consistency.
Also rename the parameter of the macro sl28cpld_pwm_from_chip to "chip".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the two
variables that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
In PWM drivers the variable name "chip" is usually only used for struct
pwm_chip pointers. This driver however used "chip" for its driver data
and pwm_chip pointers are named "chip", too, when there is no driver
data around and "c" otherwise. Instead use "atmel" for driver data and
always "chip" for pwm_chips.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
[thierry.reding@gmail.com: replace ddata by atmel]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Most variables of type struct pwm_chip * are named "chip", there are
only three outliers called "pc". Change these three to "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
There's a little bit of everything in here: we've got various
improvements and cleanups to drivers, some fixes across the board and a
bit of new hardware support.
-----BEGIN PGP SIGNATURE-----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=gWkY
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"There's a little bit of everything in here: we've got various
improvements and cleanups to drivers, some fixes across the board and
a bit of new hardware support"
* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
pwm: Add Renesas RZ/G2L MTU3a PWM driver
pwm: mtk_disp: Fix the disable flow of disp_pwm
dt-bindings: pwm: restrict node name suffixes
pwm: pca9685: Switch i2c driver back to use .probe()
pwm: ab8500: Fix error code in probe()
MAINTAINERS: add pwm to PolarFire SoC entry
pwm: add microchip soft ip corePWM driver
pwm: sysfs: Do not apply state to already disabled PWMs
pwm: imx-tpm: force 'real_period' to be zero in suspend
pwm: meson: make full use of common clock framework
pwm: meson: don't use hdmi/video clock as mux parent
pwm: meson: switch to using struct clk_parent_data for mux parents
pwm: meson: remove not needed check in meson_pwm_calc
pwm: meson: fix handling of period/duty if greater than UINT_MAX
pwm: meson: modify and simplify calculation in meson_pwm_get_state
dt-bindings: pwm: Add R-Car V3U device tree bindings
dt-bindings: pwm: imx: add i.MX8QXP compatible
pwm: mediatek: Add support for MT7981
dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
...
The RZ/G2L Multi-Function Timer Pulse Unit 3 (a.k.a MTU3a) uses
one counter and two match components to configure duty_cycle
and period to generate PWM output waveform.
Add basic support for RZ/G2L MTU3a PWM driver by creating separate
PWM channels for each IOs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
There is a flow error in the original mtk_disp_pwm_apply() function.
If this function is called when the clock is disabled, there will be a
chance to operate the disp_pwm register, resulting in disp_pwm exception.
Fix this accordingly.
Fixes: 888a623db5d0 ("pwm: mtk-disp: Implement atomic API .apply()")
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Fei Shao <fshao@chromium.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
