IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's just a shim layer to abstract system memory, that
can be accessed via regular load and store, from IO memory that needs to
be acessed via arch helpers.
The idea is to extend this API so it can fulfill other needs, internal
to a single driver. Example: in the i915 driver it's desired to share
the implementation for integrated graphics, which uses mostly system
memory, with discrete graphics, which may need to access IO memory.
The conversion was mostly done with the following semantic patch:
@r1@
@@
- struct dma_buf_map
+ struct iosys_map
@r2@
@@
(
- DMA_BUF_MAP_INIT_VADDR
+ IOSYS_MAP_INIT_VADDR
|
- dma_buf_map_set_vaddr
+ iosys_map_set_vaddr
|
- dma_buf_map_set_vaddr_iomem
+ iosys_map_set_vaddr_iomem
|
- dma_buf_map_is_equal
+ iosys_map_is_equal
|
- dma_buf_map_is_null
+ iosys_map_is_null
|
- dma_buf_map_is_set
+ iosys_map_is_set
|
- dma_buf_map_clear
+ iosys_map_clear
|
- dma_buf_map_memcpy_to
+ iosys_map_memcpy_to
|
- dma_buf_map_incr
+ iosys_map_incr
)
@@
@@
- #include <linux/dma-buf-map.h>
+ #include <linux/iosys-map.h>
Then some files had their includes adjusted and some comments were
update to remove mentions to dma-buf-map.
Since this is not specific to dma-buf anymore, move the documentation to
the "Bus-Independent Device Accesses" section.
v2:
- Squash patches
v3:
- Fix wrong removal of dma-buf.h from MAINTAINERS
- Move documentation from dma-buf.rst to device-io.rst
v4:
- Change documentation title and level
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
Add a TODO item about requesting memory regions for each driver. The
current DRM drivers don't do this consistently.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-6-tzimmermann@suse.de
Besides some legacy code, vmwgfx is the only user of DRM's hash-
table implementation. Copy the code into the driver, so that the
core code can be retired.
No functional changes. However, the real solution for vmwgfx is to
use Linux' generic hash-table functions.
v2:
* add TODO item for updating vmwgfx (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211129094841.22499-3-tzimmermann@suse.de
Add additional information on the semantics of the size fields in
struct drm_mode_config. Also add a TODO to review all driver for
correct usage of these fields.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-10-tzimmermann@suse.de
Scroll acceleration is disabled in fbcon by hard-wiring
p->scrollmode = SCROLL_REDRAW. Remove the obsolete code in fbcon.c
and fbdev/core/
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YVXTYqszZix9TxjJ@gineta.localdomain
The previous commits do exactly what this entry in the TODO file asks
for, thus we can remove it now as it is no longer applicable.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-18-greenfoo@u92.eu
I always forget where it was, store it until this gets picked up by an
internship again.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421152911.1871473-1-daniel.vetter@ffwll.ch
Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver
fails, which breaks joining and mirroring of display in X11.
For USB devices, pick the associated USB controller as attachment device.
This allows the DRM import helpers to perform the DMA setup. If the DMA
controller does not support DMA transfers, we're out of luck and cannot
import. Our current USB-based DRM drivers don't use DMA, so the actual
DMA device is not important.
Tested by joining/mirroring displays of udl and radeon under Gnome/X11.
v8:
* release dmadev if device initialization fails (Noralf)
* fix commit description (Noralf)
v7:
* fix use-before-init bug in gm12u320 (Dan)
v6:
* implement workaround in DRM drivers and hold reference to
DMA device while USB device is in use
* remove dev_is_usb() (Greg)
* collapse USB helper into usb_intf_get_dma_device() (Alan)
* integrate Daniel's TODO statement (Daniel)
* fix typos (Greg)
v5:
* provide a helper for USB interfaces (Alan)
* add FIXME item to documentation and TODO list (Daniel)
v4:
* implement workaround with USB helper functions (Greg)
* use struct usb_device->bus->sysdev as DMA device (Takashi)
v3:
* drop gem_create_object
* use DMA mask of USB controller, if any (Daniel, Christian, Noralf)
v2:
* move fix to importer side (Christian, Daniel)
* update SHMEM and CMA helpers for new PRIME callbacks
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices")
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Only planes' prepare_fb and cleanup_fb, and encoders' atomic_check and
atomic_mode_set hooks remain with an object state and not the global
drm_atomic_state.
prepare_fb and cleanup_fb operate by design on a given state and
depending on the calling site can operate on either the old or new
state, so it doesn't really make much sense to convert them.
The encoders' atomic_check and atomic_mode_set operate on the CRTC and
connector state connected to them since encoders don't have a state of
their own. Without those state pointers, we would need to get the CRTC
through the drm_connector_state crtc pointer.
However, in order to get the drm_connector_state pointer, we would need
to get the connector itself and while usually we have a single connector
connected to the encoder, we can't really get it from the encoder at
the moment since it could be behind any number of bridges.
While this could be addressed by (for example) listing all the
connectors and finding the one that has the encoder as its source, it
feels like an unnecessary rework for something that is slowly getting
replaced by bridges.
Since all the users that matter have been converted, let's remove the
TODO item.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-11-maxime@cerno.tech
- As promised, the minimum Sphinx version to build the docs is now 1.7,
and we have dropped support for Python 2 entirely. That allowed the
removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from relative
paths to RST files.
- More translations, typo fixes, and warning fixes.
No conflicts with any other tree as far as I know.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmAq4EUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTIAH/1I5MlVQwuvNKjwCAEdmltQgHv6SmXSpDkrp
SGuviWVXxqz8dTyo7C2R12qE/7nP8zGAmclNdX78ynl5qWaj05lQsjBgMYSoQO/F
+akyLQSL8/8SQrtDPPBcboPuIz9DzkX51kkQthvCf0puJi0ScKVHO9Sk9SKUgDoK
cnCE9VwpGL7YX/ee2wt91UYREijgJ9P7eQ6rqKvUZ5Itu9ikfu9vQU41GR9tOXDK
MQK+k38pWdl8wRgTgA0pkVhMf1G732bxTTicvFHXcyqmCkh7++m2+ysT8O+SBBMX
e5BbP0yysSqThjwFHOW5PWM1AWD5iVz+pnwJwEaJ4K76tJJOw9M=
=bcDk
-----END PGP SIGNATURE-----
Merge tag 'docs-5.12' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
Requested by Thomas. I think it justifies a new level, since I tried
to make some forward progress on this last summer, and gave up (for
now). This is very tricky.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210122133624.1751802-1-daniel.vetter@ffwll.ch
(cherry picked from commit 5823cca39d585e4b4a32b1292eed0015da9c3276)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Requested by Thomas. I think it justifies a new level, since I tried
to make some forward progress on this last summer, and gave up (for
now). This is very tricky.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210122133624.1751802-1-daniel.vetter@ffwll.ch
Internship season is starting, let's review this. One thing that's
pending is Maxime's work to roll out drm_atomic_state pointers to all
callbacks, he said he'll remove that entry once it's all done.
v2: Fix typos (Maxime)
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121112919.1460322-1-daniel.vetter@ffwll.ch
Replace the lkml.org links with lore to better use a single source
that's more likely to stay available long-term.
Done by bash script:
cvt_lkml_to_lore ()
{
tmpfile=$(mktemp ./.cvt_links.XXXXXXX)
header=$(echo $1 | sed 's@/lkml/@/lkml/headers/@')
wget -qO - $header > $tmpfile
if [[ $? == 0 ]] ; then
link=$(grep -i '^Message-Id:' $tmpfile | head -1 | \
sed -r -e 's/^\s*Message-Id:\s*<\s*//' -e 's/\s*>\s*$//' -e 's@^@https://lore.kernel.org/r/@')
# echo "testlink: $link"
if [ -n "$link" ] ; then
wget -qO - $link > /dev/null
if [[ $? == 0 ]] ; then
echo $link
fi
fi
fi
rm -f $tmpfile
}
git grep -P -o "\bhttps?://(?:www.)?lkml.org/lkml[\/\w]+" $@ |
while read line ; do
echo $line
file=$(echo $line | cut -f1 -d':')
link=$(echo $line | cut -f2- -d':')
newlink=$(cvt_lkml_to_lore $link)
if [[ -n "$newlink" ]] ; then
sed -i -e "s#\b$link\b#$newlink#" $file
fi
done
Link: https://lore.kernel.org/patchwork/patch/1265849/#1462688
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/77cdb7f32cfb087955bfc3600b86c40bed5d4104.camel@perches.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
I didnt' format the thing correctly :-(
Fixes: 39aead8373b3 ("fbcon: Disable accelerated scrolling")
Reviewed-by: Simon Ser <contact@emersion.fr>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118073637.597206-1-daniel.vetter@ffwll.ch
So ever since syzbot discovered fbcon, we have solid proof that it's
full of bugs. And often the solution is to just delete code and remove
features, e.g. 50145474f6ef ("fbcon: remove soft scrollback code").
Now the problem is that most modern-ish drivers really only treat
fbcon as an dumb kernel console until userspace takes over, and Oops
printer for some emergencies. Looking at drm drivers and the basic
vesa/efi fbdev drivers shows that only 3 drivers support any kind of
acceleration:
- nouveau, seems to be enabled by default
- omapdrm, when a DMM remapper exists using remapper rewriting for
y/xpanning
- gma500, but that is getting deleted now for the GTT remapper trick,
and the accelerated copyarea never set the FBINFO_HWACCEL_COPYAREA
flag, so unused (and could be deleted already I think).
No other driver supportes accelerated fbcon. And fbcon is the only
user of this accel code (it's not exposed as uapi through ioctls),
which means we could garbage collect fairly enormous amounts of code
if we kill this.
Plus because syzbot only runs on virtual hardware, and none of the
drivers for that have acceleration, we'd remove a huge gap in testing.
And there's no other even remotely comprehensive testing aside from
syzbot.
This patch here just disables the acceleration code by always
redrawing when scrolling. The plan is that once this has been merged
for well over a year in released kernels, we can start to go around
and delete a lot of code.
v2:
- Drop a few more unused local variables, somehow I missed the
compiler warnings (Sam)
- Fix typo in comment (Jiri)
- add a todo entry for the cleanup (Thomas)
v3: Remove more unused variables (0day)
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029132229.4068359-1-daniel.vetter@ffwll.ch
At least sparc64 requires I/O-specific access to framebuffers. This
patch updates the fbdev console accordingly.
For drivers with direct access to the framebuffer memory, the callback
functions in struct fb_ops test for the type of memory and call the rsp
fb_sys_ of fb_cfb_ functions. Read and write operations are implemented
internally by DRM's fbdev helper.
For drivers that employ a shadow buffer, fbdev's blit function retrieves
the framebuffer address as struct dma_buf_map, and uses dma_buf_map
interfaces to access the buffer.
The bochs driver on sparc64 uses a workaround to flag the framebuffer as
I/O memory and avoid a HW exception. With the introduction of struct
dma_buf_map, this is not required any longer. The patch removes the rsp
code from both, bochs and fbdev.
v7:
* use min_t(size_t,) (kernel test robot)
* return the number of bytes read/written, if any (fbdev testcase)
v5:
* implement fb_read/fb_write internally (Daniel, Sam)
v4:
* move dma_buf_map changes into separate patch (Daniel)
* TODO list: comment on fbdev updates (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-11-tzimmermann@suse.de
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
It's the horror and shouldn't be used. Realized we're not clear on
this in a discussion with Rob about what msm is doing to better
support async commits.
v2: Refine existing todo item to include this (Thomas)
Cc: Sean Paul <sean@poorly.run>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201023123925.2374863-3-daniel.vetter@ffwll.ch
Several GEM and PRIME callbacks have been deprecated in favor of
per-instance GEM object functions. Remove the callbacks as they are
now unused. The only exception is .gem_prime_mmap, which is still
in use by several drivers.
What is also gone is gem_vm_ops in struct drm_driver. All drivers now
use struct drm_gem_object_funcs.vm_ops instead.
While at it, the patch also improves error handling around calls
to .free and .get_sg_table callbacks.
v3:
* restore default call to drm_gem_prime_export() in
drm_gem_prime_handle_to_fd()
* return -ENOSYS if get_sg_table is not set
* drop all checks for obj->funcs
* clean up TODO list and documentation
v2:
* update related TODO item (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-23-tzimmermann@suse.de
The i915 driver uses the struct_mutex, eventhough it does not use the
locked version of the drm_object_gem API.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-4-emil.l.velikov@gmail.com
Let's just calculate the hsync rate on demand. No point in wasting
space storing it and risking the cached value getting out of sync
with reality.
v2: Move drm_mode_hsync() next to its only users
Drop the TODO
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com
Some drivers (komeda, malidp) don't set anything in cpp. If that is the
case the right value can be inferred from the format. Then the "bpp" member
can be eliminated from struct drm_afbc_framebuffer.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331155308.6345-3-andrzej.p@collabora.com
The new struct contains afbc-specific data.
The new function can be used by drivers which support afbc to complete
the preparation of struct drm_afbc_framebuffer. It must be called after
allocating the said struct and calling drm_gem_fb_init_with_funcs().
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311145541.29186-3-andrzej.p@collabora.com
drm_fb_helper tasks are completed now hence remove them from
todo list.
Changes since v1:
* remove entire drm_fb_helper tasks from todo list. Daniel's
"64914da24ea9 drm/fbdev-helper: don't force restores" already fixes
first one (Daniel)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-8-pankaj.laxminarayan.bharadiya@intel.com
The drm_display_info structure contains many fields related to HDMI
sinks, but none that identifies if a sink compliant with CEA-861 (EDID)
shall be treated as an HDMI sink or a DVI sink. Add such a flag, and
populate it according to section 8.3.3 ("DVI/HDMI Device
Discrimination") of the HDMI v1.3 specification.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-4-laurent.pinchart@ideasonboard.com
It's frankly a mess, and the confusion around plane_state->crtc/fb
that I fixed up in this series is the least of the problems. Add a
todo as a future note of how this could be done a lot better, and with
a lot less driver confusion.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-1-daniel.vetter@ffwll.ch
Jani has merged a new set of logging functions, which we hope to be
the One True solution now, pinky promises:
commit fb6c7ab8718eb2543695d77ad8302ff81e8e1e32
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Dec 10 14:30:43 2019 +0200
drm/print: introduce new struct drm_device based logging macros
Update the todo entry to match the new preference.
v2: Fix spelling issue Sam noticed.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219161722.2779994-1-daniel.vetter@ffwll.ch
This replaces the original TODO item for drm_fb_helper_fbdev_setup()
and _teardown(), which are deprecated.
v2:
* remove driver-specific comments
* list some basic requirements
* keep a TODO item on drm_fb_helper_init()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106124727.11641-2-tzimmermann@suse.de
They're midlayer, broken, and because of the old gunk, we can't fix
them. For examples see the various checks in drm_mode_object.c against
dev->registered, which cannot be enforced if the driver still uses the
load hook.
Unfortunately our biggest driver still uses load/unload, so this would
be really great to get fixed.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023144953.28190-2-daniel.vetter@ffwll.ch
The TODO item is misleading and makes it seem as if fbdev emulation
cannot be used with SHMEM. Rephrase the text to describe the current
situation more correctly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025092759.13069-3-tzimmermann@suse.de
Should help new people pick suitable tasks.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022152530.22038-2-daniel.vetter@ffwll.ch
Done with
commit aef9f33b7658a7489f71df5d6e6ecb47f2521e8a
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Oct 23 17:43:10 2018 +0300
drm/i915: Ensure proper HDA suspend/resume ordering with a device link
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022152530.22038-1-daniel.vetter@ffwll.ch
There is finally no more users left in the kernel of drmP.h
and drm_os_linux.h (drmP.h was the only user left).
Delete the header files and delete the corresponding todo entry.
When we started this quest there was more than 700 users of drmP.h.
And drmP.h was a huge cover-it-all header file.
Daniel Vetter is the one that followed the work from start
to the end and in between many people have contributed to the
removal process - thanks to everyone!
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007171224.1581-3-sam@ravnborg.org
Everyone is just using gem_object->resv now.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-5-daniel.vetter@ffwll.ch
This moves mipi-dbi to be a core helper with the name drm_mipi_dbi.
Fixup include's in drivers.
Move the docs entry and delete tinydrm.rst.
Delete the last tinydrm todo entry.
v2: Make DRM_MIPI_DBI tristate to enable it being built as a module.
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-9-noralf@tronnes.org
This is only used by mipi-dbi drivers so move it there.
The reason this isn't moved to the SPI subsystem is that it will in a
later patch pass a dummy rx buffer for SPI controllers that need this.
Low memory boards (64MB) can run into a problem allocating such a "large"
contiguous buffer on every transfer after a long up time.
This leaves a very specific use case, so we'll keep the function here.
mipi-dbi will first go through a refactoring though, before this will
be done.
Remove SPI todo entry now that we're done with the tinydrm.ko SPI code.
v2: Drop moving the mipi_dbi_spi_init() declaration (Sam)
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: : David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-8-noralf@tronnes.org
