IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
ARRAY_OF_MAPS and HASH_OF_MAPS map types have special logic to save
a few extra fields required for correct operations of ARRAY maps, when
they are used as inner maps. PERCPU_ARRAY maps have similar
requirements as they now support generating inline element lookup
logic. So make sure that both classes of maps are handled correctly.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: db69718b8efa ("bpf: inline bpf_map_lookup_elem() for PERCPU_ARRAY maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240515062440.846086-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar).
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin).
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek cpufreq: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König).
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
-----BEGIN PGP SIGNATURE-----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=el5Y
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
This closely resembles helpers added for the global cgroup_rstat_lock in
commit fc29e04ae1ad ("cgroup/rstat: add cgroup_rstat_lock helpers and
tracepoints"). This is for the per CPU lock cgroup_rstat_cpu_lock.
Based on production workloads, we observe the fast-path "update" function
cgroup_rstat_updated() is invoked around 3 million times per sec, while the
"flush" function cgroup_rstat_flush_locked(), walking each possible CPU,
can see periodic spikes of 700 invocations/sec.
For this reason, the tracepoints are split into normal and fastpath
versions for this per-CPU lock. Making it feasible for production to
continuously monitor the non-fastpath tracepoint to detect lock contention
issues. The reason for monitoring is that lock disables IRQs which can
disturb e.g. softirq processing on the local CPUs involved. When the
global cgroup_rstat_lock stops disabling IRQs (e.g converted to a mutex),
this per CPU lock becomes the next bottleneck that can introduce latency
variations.
A practical bpftrace script for monitoring contention latency:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_cpu_lock_contended {
@start[tid]=nsecs; @cnt[probe]=count()}
tracepoint:cgroup:cgroup_rstat_cpu_locked {
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}
@cnt[probe]=count()}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns); print(@cnt); clear(@cnt);}'
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
This kunit update for Linux 6.10-rc1 consists of:
- fix to race condition in try-catch completion
- change to __kunit_test_suites_init() to exit early if there is
nothing to test
- change to string-stream-test to use KUNIT_DEFINE_ACTION_WRAPPER
- moving fault tests behind KUNIT_FAULT_TEST Kconfig option
- kthread test fixes and improvements
- iov_iter test fixes
-----BEGIN PGP SIGNATURE-----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=3QIa
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- fix race condition in try-catch completion
- change __kunit_test_suites_init() to exit early if there is
nothing to test
- change string-stream-test to use KUNIT_DEFINE_ACTION_WRAPPER
- move fault tests behind KUNIT_FAULT_TEST Kconfig option
- kthread test fixes and improvements
- iov_iter test fixes
* tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: bail out early in __kunit_test_suites_init() if there are no suites to test
kunit: string-stream-test: use KUNIT_DEFINE_ACTION_WRAPPER
kunit: test: Move fault tests behind KUNIT_FAULT_TEST Kconfig option
kunit: unregister the device on error
kunit: Fix race condition in try-catch completion
kunit: Add tests for fault
kunit: Print last test location on fault
kunit: Fix KUNIT_SUCCESS() calls in iov_iter tests
kunit: Handle test faults
kunit: Fix timeout message
kunit: Fix kthread reference
kunit: Handle thread creation error
- Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the lockup
detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to retrieve
the delta to the snapshot. Use this new mechanism in the watchdog code
to do a two stage lockup analysis by taking the snapshot and printing
the deltas for the topmost active interrupts on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the global
counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that they
are not delivered before the system resumes the device drivers when
coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU are
migrated to a different CPU in the affinity mask. This can fail when
the CPUs have no vectors left. Instead of giving up try to migrate it
to any online CPU and thereby breaking the affinity setting in order to
prevent a stale device interrupt which targets an offline CPU
- The usual small cleanups
- Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=jFLf
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
- Core code:
- Make timekeeping and VDSO time readouts resilent against math overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle the
multiplication overflow.
This functionality is enabled unconditionally in the kernel, but made
conditional in the VDSO code. The latter is conditional because it
allows architectures to optimize the check so it is not causing
performance regressions.
On X86 this is achieved by reworking the existing check for negative
TSC deltas as a negative delta obviously exceeds the maximum
deferrement when it is evaluated as an unsigned value. That avoids two
conditionals in the hotpath and allows to hide both the negative delta
and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
- Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmZBErUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoZVhD/9iUPzcGNgqGqcO1bXy6dH4xLpeec6o
2En1vg45DOaygN7DFxkoei20KJtfdFeaaEDH8UqmOfPcpLIuVAd0yqhgDQtx6ZcO
XNd09SFDInzUt1Ot/WcoXp5N6Wt3vyEgUAlIN1fQdbaZ3fh6OhGhXXCRfiRCGXU1
ea2pSunLuRf1pKU0AYhGIexnZMOHC4NmVXw/m+WNw5DJrmWB+OaNFKfMoQjtQ1HD
Vgyr2RALHnIeXm60y2j3dD7TWGXICE/edzOd7pEyg5LFXsmcp388eu/DEdOq3OTV
tsHLgIi05GJym3dykPBVwZk09M5oVNNfkg9zDxHWhSLkEJmc4QUaH3dgM8uBoaRW
pS3LaO3ePxWmtAOdSNKFY6xnl6df+PYJoZcIF/GuXgty7im+VLK9C4M05mSjey00
omcEywvmGdFezY6D9MmjjhFa+q2v9zpRjFpCWaIv3DQdAaDPrOzBk4SSqHZOV4lq
+hp7ar1mTn1FPrXBouwyOgSOUANISV5cy/QuwOtrVIuVR4rWFVgfWo/7J32/q5Ik
XBR0lTdQy1Biogf6xy0HCY+4wItOLTqEXXqeknHSMJpDzj5uZglZemgKbix1wVJ9
8YlD85Q7sktlPmiLMKV9ra0MKVyXDoIrgt4hX98A8M12q9bNdw23x0p0jkJHwGha
ZYUyX+XxKgOJug==
=pL+S
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core code:
- Make timekeeping and VDSO time readouts resilent against math
overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle
the multiplication overflow.
This functionality is enabled unconditionally in the kernel, but
made conditional in the VDSO code. The latter is conditional
because it allows architectures to optimize the check so it is not
causing performance regressions.
On X86 this is achieved by reworking the existing check for
negative TSC deltas as a negative delta obviously exceeds the
maximum deferrement when it is evaluated as an unsigned value. That
avoids two conditionals in the hotpath and allows to hide both the
negative delta and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers"
* tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const
clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer
clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe
clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
rust: time: doc: Add missing C header links
clocksource: Make the int help prompt unit readable in ncurses
hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()
timerqueue: Remove never used function timerqueue_node_expires()
rust: time: Add Ktime
vdso: Fix powerpc build U64_MAX undeclared error
clockevents: Convert s[n]printf() to sysfs_emit()
clocksource: Convert s[n]printf() to sysfs_emit()
clocksource: Make watchdog and suspend-timing multiplication overflow safe
timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow
timekeeping: Make delta calculation overflow safe
timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety
timekeeping: Fold in timekeeping_delta_to_ns()
timekeeping: Consolidate timekeeping helpers
timekeeping: Refactor timekeeping helpers
...
KASAN reports a bug:
BUG: KASAN: use-after-free in ftrace_location+0x90/0x120
Read of size 8 at addr ffff888141d40010 by task insmod/424
CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcf/0x610
kasan_report+0xb5/0xe0
ftrace_location+0x90/0x120
register_kprobe+0x14b/0xa40
kprobe_init+0x2d/0xff0 [kprobe_example]
do_one_initcall+0x8f/0x2d0
do_init_module+0x13a/0x3c0
load_module+0x3082/0x33d0
init_module_from_file+0xd2/0x130
__x64_sys_finit_module+0x306/0x440
do_syscall_64+0x68/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79
The root cause is that, in lookup_rec(), ftrace record of some address
is being searched in ftrace pages of some module, but those ftrace pages
at the same time is being freed in ftrace_release_mod() as the
corresponding module is being deleted:
CPU1 | CPU2
register_kprobes() { | delete_module() {
check_kprobe_address_safe() { |
arch_check_ftrace_location() { |
ftrace_location() { |
lookup_rec() // USE! | ftrace_release_mod() // Free!
To fix this issue:
1. Hold rcu lock as accessing ftrace pages in ftrace_location_range();
2. Use ftrace_location_range() instead of lookup_rec() in
ftrace_location();
3. Call synchronize_rcu() before freeing any ftrace pages both in
ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().
Link: https://lore.kernel.org/linux-trace-kernel/20240509192859.1273558-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <mathieu.desnoyers@efficios.com>
Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
BPF just-in-time compiler depended on CONFIG_MODULES because it used
module_alloc() to allocate memory for the generated code.
Since code allocations are now implemented with execmem, drop dependency of
CONFIG_BPF_JIT on CONFIG_MODULES and make it select CONFIG_EXECMEM.
Suggested-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
kprobes depended on CONFIG_MODULES because it has to allocate memory for
code.
Since code allocations are now implemented with execmem, kprobes can be
enabled in non-modular kernels.
Add #ifdef CONFIG_MODULE guards for the code dealing with kprobes inside
modules, make CONFIG_KPROBES select CONFIG_EXECMEM and drop the
dependency of CONFIG_KPROBES on CONFIG_MODULES.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
[mcgrof: rebase in light of NEED_TASKS_RCU ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Extend execmem parameters to accommodate more complex overrides of
module_alloc() by architectures.
This includes specification of a fallback range required by arm, arm64
and powerpc, EXECMEM_MODULE_DATA type required by powerpc, support for
allocation of KASAN shadow required by s390 and x86 and support for
late initialization of execmem required by arm64.
The core implementation of execmem_alloc() takes care of suppressing
warnings when the initial allocation fails but there is a fallback range
defined.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Tested-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
module_alloc() is used everywhere as a mean to allocate memory for code.
Beside being semantically wrong, this unnecessarily ties all subsystems
that need to allocate code, such as ftrace, kprobes and BPF to modules and
puts the burden of code allocation to the modules code.
Several architectures override module_alloc() because of various
constraints where the executable memory can be located and this causes
additional obstacles for improvements of code allocation.
Start splitting code allocation from modules by introducing execmem_alloc()
and execmem_free() APIs.
Initially, execmem_alloc() is a wrapper for module_alloc() and
execmem_free() is a replacement of module_memfree() to allow updating all
call sites to use the new APIs.
Since architectures define different restrictions on placement,
permissions, alignment and other parameters for memory that can be used by
different subsystems that allocate executable memory, execmem_alloc() takes
a type argument, that will be used to identify the calling subsystem and to
allow architectures define parameters for ranges suitable for that
subsystem.
No functional changes.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Move the logic related to the memory allocation and freeing into
module_memory_alloc() and module_memory_free().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces. The goal is to remove its use completely [2].
namebuf is eventually cleaned of any trailing llvm suffixes using
strstr(). This hints that namebuf should be NUL-terminated.
static void cleanup_symbol_name(char *s)
{
char *res;
...
res = strstr(s, ".llvm.");
...
}
Due to this, use strscpy() over strncpy() as it guarantees
NUL-termination on the destination buffer. Drop the -1 from the length
calculation as it is no longer needed to ensure NUL-termination.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90 [2]
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
If UNUSED_KSYMS_WHITELIST is a file generated
before Kbuild runs, and the source tree is in
a read-only filesystem, the developer must put
the file somewhere and specify an absolute
path to UNUSED_KSYMS_WHITELIST. This worked,
but if IKCONFIG=y, an absolute path is embedded
into .config and eventually into vmlinux, causing
the build to be less reproducible when building
on a different machine.
This patch makes the handling of
UNUSED_KSYMS_WHITELIST to be similar to
MODULE_SIG_KEY.
First, check if UNUSED_KSYMS_WHITELIST is an
absolute path, just as before this patch. If so,
use the path as is.
If it is a relative path, use wildcard to check
the existence of the file below objtree first.
If it does not exist, fall back to the original
behavior of adding $(srctree)/ before the value.
After this patch, the developer can put the generated
file in objtree, then use a relative path against
objtree in .config, eradicating any absolute paths
that may be evaluated differently on different machines.
Signed-off-by: Yifan Hong <elsk@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Commit 8788ca164eb4b ("ftrace: Remove the legacy _ftrace_direct API")
stopped setting the 'ftrace_direct_func_count' variable, but left
it around. Clean it up.
Link: https://lore.kernel.org/linux-trace-kernel/20240506233305.215735-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 8788ca164eb4b ("ftrace: Remove the legacy _ftrace_direct API")
stopped using 'ftrace_direct_funcs' (and the associated
struct ftrace_direct_func). Remove them.
Build tested only (on x86-64 with FTRACE and DYNAMIC_FTRACE
enabled)
Link: https://lore.kernel.org/linux-trace-kernel/20240504132303.67538-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt. affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt. arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix.
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=obph
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
- Combine perf and BPF for fast evalution of HW breakpoint
conditions.
- Add LBR capture support outside of hardware events
- Trigger IO signals for watermark_wakeup
- Add RAPL support for Intel Arrow Lake and Lunar Lake
- Optimize frequency-throttling
- Miscellaneous cleanups & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=r0yr
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Combine perf and BPF for fast evalution of HW breakpoint
conditions
- Add LBR capture support outside of hardware events
- Trigger IO signals for watermark_wakeup
- Add RAPL support for Intel Arrow Lake and Lunar Lake
- Optimize frequency-throttling
- Miscellaneous cleanups & fixes
* tag 'perf-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf/bpf: Mark perf_event_set_bpf_handler() and perf_event_free_bpf_handler() as inline too
selftests/perf_events: Test FASYNC with watermark wakeups
perf/ring_buffer: Trigger IO signals for watermark_wakeup
perf: Move perf_event_fasync() to perf_event.h
perf/bpf: Change the !CONFIG_BPF_SYSCALL stubs to static inlines
selftest/bpf: Test a perf BPF program that suppresses side effects
perf/bpf: Allow a BPF program to suppress all sample side effects
perf/bpf: Remove unneeded uses_default_overflow_handler()
perf/bpf: Call BPF handler directly, not through overflow machinery
perf/bpf: Remove #ifdef CONFIG_BPF_SYSCALL from struct perf_event members
perf/bpf: Create bpf_overflow_handler() stub for !CONFIG_BPF_SYSCALL
perf/bpf: Reorder bpf_overflow_handler() ahead of __perf_event_overflow()
perf/x86/rapl: Add support for Intel Lunar Lake
perf/x86/rapl: Add support for Intel Arrow Lake
perf/core: Reduce PMU access to adjust sample freq
perf/core: Optimize perf_adjust_freq_unthr_context()
perf/x86/amd: Don't reject non-sampling events with configured LBR
perf/x86/amd: Support capturing LBR from software events
perf/x86/amd: Avoid taking branches before disabling LBR
perf/x86/amd: Ensure amd_pmu_core_disable_all() is always inlined
...
- Over a dozen code generation micro-optimizations for the atomic
and spinlock code.
- Add more __ro_after_init attributes
- Robustify the lockdevent_*() macros
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rT48
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Over a dozen code generation micro-optimizations for the atomic
and spinlock code
- Add more __ro_after_init attributes
- Robustify the lockdevent_*() macros
* tag 'locking-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/pvqspinlock/x86: Use _Q_LOCKED_VAL in PV_UNLOCK_ASM macro
locking/qspinlock/x86: Micro-optimize virt_spin_lock()
locking/atomic/x86: Merge __arch{,_try}_cmpxchg64_emu_local() with __arch{,_try}_cmpxchg64_emu()
locking/atomic/x86: Introduce arch_try_cmpxchg64_local()
locking/pvqspinlock/x86: Remove redundant CMP after CMPXCHG in __raw_callee_save___pv_queued_spin_unlock()
locking/pvqspinlock: Use try_cmpxchg() in qspinlock_paravirt.h
locking/pvqspinlock: Use try_cmpxchg_acquire() in trylock_clear_pending()
locking/qspinlock: Use atomic_try_cmpxchg_relaxed() in xchg_tail()
locking/atomic/x86: Define arch_atomic_sub() family using arch_atomic_add() functions
locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions
locking/atomic/x86: Introduce arch_atomic64_read_nonatomic() to x86_32
locking/atomic/x86: Introduce arch_atomic64_try_cmpxchg() to x86_32
locking/atomic/x86: Introduce arch_try_cmpxchg64() for !CONFIG_X86_CMPXCHG64
locking/atomic/x86: Modernize x86_32 arch_{,try_}_cmpxchg64{,_local}()
locking/atomic/x86: Correct the definition of __arch_try_cmpxchg128()
x86/tsc: Make __use_tsc __ro_after_init
x86/kvm: Make kvm_async_pf_enabled __ro_after_init
context_tracking: Make context_tracking_key __ro_after_init
jump_label,module: Don't alloc static_key_mod for __ro_after_init keys
locking/qspinlock: Always evaluate lockevent* non-event parameter once
Partially revert commit d6cb38e10810 ("tracing: Use div64_u64() instead
of do_div()") and use do_div() again to utilize its faster 64-by-32
division compared to the 64-by-64 division done by div64_u64().
Explicitly cast the divisor bm_cnt to u32 to prevent a Coccinelle
warning reported by do_div.cocci. The warning was removed with commit
d6cb38e10810 ("tracing: Use div64_u64() instead of do_div()").
Using the faster 64-by-32 division and casting bm_cnt to u32 is safe
because we return early from trace_do_benchmark() if bm_cnt > UINT_MAX.
This approach is already used twice in trace_do_benchmark() when
calculating the standard deviation:
do_div(stddev, (u32)bm_cnt);
do_div(stddev, (u32)bm_cnt - 1);
Link: https://lore.kernel.org/linux-trace-kernel/20240329160229.4874-2-thorsten.blum@toblux.com
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
While testing libtracefs on the mmapped ring buffer, the test that checks
if missed events are accounted for failed when using the mapped buffer.
This is because the mapped page does not update the missed events that
were dropped because the writer filled up the ring buffer before the
reader could catch it.
Add the missed events to the reader page/sub-buffer when the IOCTL is done
and a new reader page is acquired.
Note that all accesses to the reader_page via rb_page_commit() had to be
switched to rb_page_size(), and rb_page_size() which was just a copy of
rb_page_commit() but now it masks out the RB_MISSED bits. This is needed
as the mapped reader page is still active in the ring buffer code and
where it reads the commit field of the bpage for the size, it now must
mask it otherwise the missed bits that are now set will corrupt the size
returned.
Link: https://lore.kernel.org/linux-trace-kernel/20240312175405.12fb6726@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkGcZAAKCRDbK58LschI
g6o6APwLsqhrM2w71VUN5ciCxu4H5VDtZp6wkdqtVbxxU4qNxQEApKgYgKt8ZLF3
Kily5c7m+S4ZXhMX21rb8JhSAz0dfQk=
=5Dk7
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-13
We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).
The main changes are:
1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.
2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.
3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.
4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.
5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.
6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.
7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.
8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.
9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.
10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.
11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.
12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.
13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.
14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.
15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.
16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.
17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================
Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running heavy test workloads with KASAN enabled, RCU Tasks grace
periods can extend for many tens of seconds, significantly slowing
trace registration. Therefore, make the registration-side RCU Tasks
grace period be asynchronous via call_rcu_tasks().
Link: https://lore.kernel.org/linux-trace-kernel/ac05be77-2972-475b-9b57-56bef15aa00a@paulmck-laptop
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Chris Mason <clm@fb.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function simple_strtoul performs no error checking in scenarios
where the input value overflows the intended output variable.
This results in this function successfully returning, even when the
output does not match the input string (aka the function returns
successfully even when the result is wrong).
Or as it was mentioned [1], "...simple_strtol(), simple_strtoll(),
simple_strtoul(), and simple_strtoull() functions explicitly ignore
overflows, which may lead to unexpected results in callers."
Hence, the use of those functions is discouraged.
This patch replaces all uses of the simple_strtoul with the safer
alternatives kstrtoul and kstruint.
Callers affected:
- add_rec_by_index
- set_graph_max_depth_function
Side effects of this patch:
- Since `fgraph_max_depth` is an `unsigned int`, this patch uses
kstrtouint instead of kstrtoul to avoid any compiler warnings
that could originate from calling the latter.
- This patch ensures that the callers of kstrtou* return accordingly
when kstrtoul and kstruint fail for some reason.
In this case, both callers this patch is addressing return 0 on error.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull
Link: https://lore.kernel.org/linux-trace-kernel/GV1PR10MB656333529A8D7B8AFB28D238E8B4A@GV1PR10MB6563.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, user-space extracts data from the ring-buffer via splice,
which is handy for storage or network sharing. However, due to splice
limitations, it is imposible to do real-time analysis without a copy.
A solution for that problem is to let the user-space map the ring-buffer
directly.
The mapping is exposed via the per-CPU file trace_pipe_raw. The first
element of the mapping is the meta-page. It is followed by each
subbuffer constituting the ring-buffer, ordered by their unique page ID:
* Meta-page -- include/uapi/linux/trace_mmap.h for a description
* Subbuf ID 0
* Subbuf ID 1
...
It is therefore easy to translate a subbuf ID into an offset in the
mapping:
reader_id = meta->reader->id;
reader_offset = meta->meta_page_size + reader_id * meta->subbuf_size;
When new data is available, the mapper must call a newly introduced ioctl:
TRACE_MMAP_IOCTL_GET_READER. This will update the Meta-page reader ID to
point to the next reader containing unread data.
Mapping will prevent snapshot and buffer size modifications.
Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-4-vdonnefort@google.com
CC: <linux-mm@kvack.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation for allowing the user-space to map a ring-buffer, add
a set of mapping functions:
ring_buffer_{map,unmap}()
And controls on the ring-buffer:
ring_buffer_map_get_reader() /* swap reader and head */
Mapping the ring-buffer also involves:
A unique ID for each subbuf of the ring-buffer, currently they are
only identified through their in-kernel VA.
A meta-page, where are stored ring-buffer statistics and a
description for the current reader
The linear mapping exposes the meta-page, and each subbuf of the
ring-buffer, ordered following their unique ID, assigned during the
first mapping.
Once mapped, no subbuf can get in or out of the ring-buffer: the buffer
size will remain unmodified and the splice enabling functions will in
reality simply memcpy the data instead of swapping subbufs.
Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-3-vdonnefort@google.com
CC: <linux-mm@kvack.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation for the ring-buffer memory mapping, allocate compound
pages for the ring-buffer sub-buffers to enable us to map them to
user-space with vm_insert_pages().
Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-2-vdonnefort@google.com
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
API:
- Remove crypto stats interface.
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs.
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5).
- Add ECDSA NIST P521.
Drivers:
- Expose otp zone in atmel.
- Add dh fallback for primes > 4K in qat.
- Add interface for live migration in qat.
- Use dma for aes requests in starfive.
- Add full DMA support for stm32mpx in stm32.
- Add Tegra Security Engine driver.
Others:
- Introduce scope-based x509_certificate allocation.
-----BEGIN PGP SIGNATURE-----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=NDS0
-----END PGP SIGNATURE-----
Merge tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove crypto stats interface
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5)
- Add ECDSA NIST P521
Drivers:
- Expose otp zone in atmel
- Add dh fallback for primes > 4K in qat
- Add interface for live migration in qat
- Use dma for aes requests in starfive
- Add full DMA support for stm32mpx in stm32
- Add Tegra Security Engine driver
Others:
- Introduce scope-based x509_certificate allocation"
* tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits)
crypto: atmel-sha204a - provide the otp content
crypto: atmel-sha204a - add reading from otp zone
crypto: atmel-i2c - rename read function
crypto: atmel-i2c - add missing arg description
crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()
crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()
crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout()
crypto: caam - i.MX8ULP donot have CAAM page0 access
crypto: caam - init-clk based on caam-page0-access
crypto: starfive - Use fallback for unaligned dma access
crypto: starfive - Do not free stack buffer
crypto: starfive - Skip unneeded fallback allocation
crypto: starfive - Skip dma setup for zeroed message
crypto: hisilicon/sec2 - fix for register offset
crypto: hisilicon/debugfs - mask the unnecessary info from the dump
crypto: qat - specify firmware files for 402xx
crypto: x86/aes-gcm - simplify GCM hash subkey derivation
crypto: x86/aes-gcm - delete unused GCM assembly code
crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath()
hwrng: stm32 - repair clock handling
...
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup" helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI
-----BEGIN PGP SIGNATURE-----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=CgsW
-----END PGP SIGNATURE-----
Merge tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"The bulk of the changes here are related to refactoring and expanding
the KUnit tests for string helper and fortify behavior.
Some trivial strncpy replacements in fs/ were carried in my tree. Also
some fixes to SCSI string handling were carried in my tree since the
helper for those was introduce here. Beyond that, just little fixes
all around: objtool getting confused about LKDTM+KCFI, preparing for
future refactors (constification of sysctl tables, additional
__counted_by annotations), a Clang UBSAN+i386 crash fix, and adding
more options in the hardening.config Kconfig fragment.
Summary:
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas
Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to
version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup"
helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI"
* tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits)
uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be}
stackleak: Use a copy of the ctl_table argument
string: Add additional __realloc_size() annotations for "dup" helpers
kunit/fortify: Fix replaced failure path to unbreak __alloc_size
hardening: Enable KCFI and some other options
lkdtm: Disable CFI checking for perms functions
kunit/fortify: Add memcpy() tests
kunit/fortify: Do not spam logs with fortify WARNs
kunit/fortify: Rename tests to use recommended conventions
init: replace deprecated strncpy with strscpy_pad
kunit/fortify: Fix mismatched kvalloc()/vfree() usage
scsi: qla2xxx: Avoid possible run-time warning with long model_num
scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings
scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings
fs: ecryptfs: replace deprecated strncpy with strscpy
hfsplus: refactor copy_name to not use strncpy
reiserfs: replace deprecated strncpy with scnprintf
virt: acrn: replace deprecated strncpy with strscpy
ubsan: Avoid i386 UBSAN handler crashes with Clang
ubsan: Remove 1-element array usage in debug reporting
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkGSLAAKCRDbK58LschI
gzFIAQDX9yJYEj3ppVR3oPf9Czqj4oVPE2ZNAmVlTig3eZikfAD9Gh0s5iERnFfs
WAST1OgUF/4EHktO/7PKtkvBg0DdQgk=
=DviD
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-13
We've added 3 non-merge commits during the last 2 day(s) which contain
a total of 2 files changed, 62 insertions(+), 8 deletions(-).
The main changes are:
1) Fix a case where syzkaller found that it's unexpectedly possible
to attach a cgroup_skb program to the sockopt hooks. The fix adds
missing attach_type enforcement for the link_create case along
with selftests, from Stanislav Fomichev.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add sockopt case to verify prog_type
selftests/bpf: Extend sockopt tests to use BPF_LINK_CREATE
bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE
====================
Link: https://lore.kernel.org/r/20240513041845.31040-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge Enery Model update and a power management documentation update for
6.10:
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
* pm-em:
soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
PM: EM: Add em_dev_update_chip_binning()
PM: EM: Refactor em_adjust_new_capacity()
OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
* pm-docs:
Documentation: PM: Update platform_pci_wakeup_init() reference
Merge cpuidle updates, changes related to system sleep and power capping
updates for 6.10:
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
* pm-cpuidle:
cpuidle: ladder: fix ladder_do_selection() kernel-doc
cpuidle: kirkwood: Convert to platform remove callback returning void
* pm-sleep:
PM: hibernate: replace deprecated strncpy() with strscpy()
PM: sleep: Take advantage of %ps to simplify debug output
PM: wakeup: Remove unnecessary else from device_init_wakeup()
PM: wakeup: make device_wakeup_disable() return void
* pm-powercap:
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
powercap: intel_rapl: Sort header files
powercap: intel_rapl: Add support for ArrowLake-H platform
powercap: DTPM: Avoid explicit cpumask allocation on stack
This commit adds a __data_racy type qualifier that enables kernel
developers to inform KCSAN that a given variable is a shared variable
without needing to mark each and every access. This allows pre-KCSAN
code to be correctly (if approximately) instrumented withh very little
effort, and also provides people reading the code a clear indication that
the variable is in fact shared. In addition, it permits incremental
transition to per-access KCSAN marking, so that (for example) a given
subsystem can be transitioned one variable at a time, while avoiding
large numbers of KCSAN warnings during this transition.
-----BEGIN PGP SIGNATURE-----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=f1gr
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2024.05.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull kcsan update from Paul McKenney:
"Introduce __data_racy type qualifier
This adds a __data_racy type qualifier that enables kernel developers
to inform KCSAN that a given variable is a shared variable without
needing to mark each and every access.
This allows pre-KCSAN code to be correctly (if approximately)
instrumented withh very little effort, and also provides people
reading the code a clear indication that the variable is in fact
shared.
In addition, it permits incremental transition to per-access KCSAN
marking, so that (for example) a given subsystem can be transitioned
one variable at a time, while avoiding large numbers of KCSAN warnings
during this transition"
* tag 'kcsan.2024.05.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan, compiler_types: Introduce __data_racy type qualifier
This pull request contains the following branches:
fixes.2024.04.15a: Fix a lockdep complain for lazy-preemptible kernel,
remove redundant BH disable for TINY_RCU, remove redundant READ_ONCE()
in tree.c, fix false positives KCSAN splat and fix buffer overflow in
the print_cpu_stall_info().
misc.2024.04.12a: Misc updates related to bpf, tracing and update the
MAINTAINERS file.
rcu-sync-normal-improve.2024.04.15a: An improvement of a normal
synchronize_rcu() call in terms of latency. It maintains a separate
track for sync. users only. This approach bypasses per-cpu nocb-lists
thus sync-users do not depend on nocb-list length and how fast regular
callbacks are processed.
rcu-tasks.2024.04.15a: RCU tasks, switch tasks RCU grace periods to
sleep at TASK_IDLE priority, fix some comments, add some diagnostic
warning to the exit_tasks_rcu_start() and fix a buffer overflow in
the show_rcu_tasks_trace_gp_kthread().
rcutorture.2024.04.15a: Increase memory to guest OS, fix a Tasks
Rude RCU testing, some updates for TREE09, dump mode information
to debug GP kthread state, remove redundant READ_ONCE(), fix some
comments about RCU_TORTURE_PIPE_LEN and pipe_count, remove some
redundant pointer initialization, fix a hung splat task by when
the rcutorture tests start to exit, fix invalid context warning,
add '--do-kvfree' parameter to torture test and use slow register
unregister callbacks only for rcutype test.
-----BEGIN PGP SIGNATURE-----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=cq8V
-----END PGP SIGNATURE-----
Merge tag 'rcu.next.v6.10' of https://github.com/urezki/linux
Pull RCU updates from Uladzislau Rezki:
- Fix a lockdep complain for lazy-preemptible kernel, remove redundant
BH disable for TINY_RCU, remove redundant READ_ONCE() in tree.c, fix
false positives KCSAN splat and fix buffer overflow in the
print_cpu_stall_info().
- Misc updates related to bpf, tracing and update the MAINTAINERS file.
- An improvement of a normal synchronize_rcu() call in terms of
latency. It maintains a separate track for sync. users only. This
approach bypasses per-cpu nocb-lists thus sync-users do not depend on
nocb-list length and how fast regular callbacks are processed.
- RCU tasks: switch tasks RCU grace periods to sleep at TASK_IDLE
priority, fix some comments, add some diagnostic warning to the
exit_tasks_rcu_start() and fix a buffer overflow in the
show_rcu_tasks_trace_gp_kthread().
- RCU torture: Increase memory to guest OS, fix a Tasks Rude RCU
testing, some updates for TREE09, dump mode information to debug GP
kthread state, remove redundant READ_ONCE(), fix some comments about
RCU_TORTURE_PIPE_LEN and pipe_count, remove some redundant pointer
initialization, fix a hung splat task by when the rcutorture tests
start to exit, fix invalid context warning, add '--do-kvfree'
parameter to torture test and use slow register unregister callbacks
only for rcutype test.
* tag 'rcu.next.v6.10' of https://github.com/urezki/linux: (48 commits)
rcutorture: Use rcu_gp_slow_register/unregister() only for rcutype test
torture: Scale --do-kvfree test time
rcutorture: Fix invalid context warning when enable srcu barrier testing
rcutorture: Make stall-tasks directly exit when rcutorture tests end
rcutorture: Removing redundant function pointer initialization
rcutorture: Make rcutorture support print rcu-tasks gp state
rcutorture: Use the gp_kthread_dbg operation specified by cur_ops
rcutorture: Re-use value stored to ->rtort_pipe_count instead of re-reading
rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment
rcutorture: Remove extraneous rcu_torture_pipe_update_one() READ_ONCE()
rcu: Allocate WQ with WQ_MEM_RECLAIM bit set
rcu: Support direct wake-up of synchronize_rcu() users
rcu: Add a trace event for synchronize_rcu_normal()
rcu: Reduce synchronize_rcu() latency
rcu: Fix buffer overflow in print_cpu_stall_info()
rcu: Mollify sparse with RCU guard
rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow
rcu-tasks: Fix the comments for tasks_rcu_exit_srcu_stall_timer
rcu-tasks: Replace exit_tasks_rcu_start() initialization with WARN_ON_ONCE()
rcu: Remove redundant CONFIG_PROVE_RCU #if condition
...
When the ABI was updated to prevent same name w/different args, it
missed an important corner case when fields don't end with a space.
Typically, space is used for fields to help separate them, like
"u8 field1; u8 field2". If no spaces are used, like
"u8 field1;u8 field2", then the parsing works for the first time.
However, the match check fails on a subsequent register, leading to
confusion.
This is because the match check uses argv_split() and assumes that all
fields will be split upon the space. When spaces are used, we get back
{ "u8", "field1;" }, without spaces we get back { "u8", "field1;u8" }.
This causes a mismatch, and the user program gets back -EADDRINUSE.
Add a method to detect this case before calling argv_split(). If found
force a space after the field separator character ';'. This ensures all
cases work properly for matching.
With this fix, the following are all treated as matching:
u8 field1;u8 field2
u8 field1; u8 field2
u8 field1;\tu8 field2
u8 field1;\nu8 field2
Link: https://lore.kernel.org/linux-trace-kernel/20240423162338.292-2-beaub@linux.microsoft.com
Fixes: ba470eebc2f6 ("tracing/user_events: Prevent same name but different args event")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge our topic branch containing kdump hotplug changes, more detail from the
original cover letter:
Commit 247262756121 ("crash: add generic infrastructure for crash
hotplug support") added a generic infrastructure that allows
architectures to selectively update the kdump image component during CPU
or memory add/remove events within the kernel itself.
This patch series adds crash hotplug handler for PowerPC and enable
support to update the kdump image on CPU/Memory add/remove events.
Among the 6 patches in this series, the first two patches make changes
to the generic crash hotplug handler to assist PowerPC in adding support
for this feature. The last four patches add support for this feature.
The following section outlines the problem addressed by this patch
series, along with the current solution, its shortcomings, and the
proposed resolution.
Problem:
========
Due to CPU/Memory hotplug or online/offline events the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device Tree) of kdump image becomes outdated. Consequently,
attempting dump collection with an outdated elfcorehdr or FDT can lead
to failed or inaccurate dump collection.
Going forward CPU hotplug or online/offline events are referred as
CPU/Memory add/remove events.
Existing solution and its shortcoming:
======================================
The current solution to address the above issue involves monitoring the
CPU/memory add/remove events in userspace using udev rules and whenever
there are changes in CPU and memory resources, the entire kdump image
is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
CPU/Memory add/remove events, reloading the entire kdump image is
inefficient. More importantly, kdump remains inactive for a substantial
amount of time until the kdump reload completes.
Proposed solution:
==================
Instead of initiating a full kdump image reload from userspace on
CPU/Memory hotplug and online/offline events, the proposed solution aims
to update only the necessary kdump image component within the kernel
itself.
Inline the calls to bpf_get_smp_processor_id() in the riscv bpf jit.
RISCV saves the pointer to the CPU's task_struct in the TP (thread
pointer) register. This makes it trivial to get the CPU's processor id.
As thread_info is the first member of task_struct, we can read the
processor id from TP + offsetof(struct thread_info, cpu).
RISCV64 JIT output for `call bpf_get_smp_processor_id`
======================================================
Before After
-------- -------
auipc t1,0x848c ld a5,32(tp)
jalr 604(t1)
mv a5,a0
Benchmark using [1] on Qemu.
./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc
+---------------+------------------+------------------+--------------+
| Name | Before | After | % change |
|---------------+------------------+------------------+--------------|
| glob-arr-inc | 1.077 ± 0.006M/s | 1.336 ± 0.010M/s | + 24.04% |
| arr-inc | 1.078 ± 0.002M/s | 1.332 ± 0.015M/s | + 23.56% |
| hash-inc | 0.494 ± 0.004M/s | 0.653 ± 0.001M/s | + 32.18% |
+---------------+------------------+------------------+--------------+
NOTE: This benchmark includes changes from this patch and the previous
patch that implemented the per-cpu insn.
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240502151854.9810-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are several reports that the DMA sync shortcut broke non-coherent
devices.
dev->dma_need_sync is false after the &device allocation and if a driver
didn't call dma_set_mask*(), it will still be false even if the device
is not DMA-coherent and thus needs synchronizing. Due to historical
reasons, there's still a lot of drivers not calling it.
Invert the boolean, so that the sync will be performed by default and
the shortcut will be enabled only when calling dma_set_mask*().
Reported-by: Steven Price <steven.price@arm.com>
Closes: https://lore.kernel.org/lkml/010686f5-3049-46a1-8230-7752a1b433ff@arm.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/lkml/46160534-5003-4809-a408-6b3a3f4921e9@samsung.com
Fixes: f406c8e4b770. ("dma: avoid redundant calls for sync operations")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Optimize topology_span_sane() by removing duplicate comparisons.
Since topology_span_sane() is called inside of for_each_cpu(), each
previous CPU has already been compared against every other CPU. The
current CPU only needs to be compared against higher-numbered CPUs.
The total number of comparisons is reduced from N * (N - 1) to
N * (N - 1) / 2 on each non-NUMA scheduling domain level.
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The original macros of KLP_* is about the state of the transition.
Rename macros of KLP_* to KLP_TRANSITION_* to fix the confusing
description of klp transition state.
Signed-off-by: Wardenjohn <zhangwarden@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20240507050111.38195-2-zhangwarden@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
The read_actions_logged() and write_actions_logged() helpers called by the
sysctl proc handler seccomp_actions_logged_handler() are already expecting
their sysctl table argument to be read-only. Actually mark the argument
as const in preparation[1] for global constification of the sysctl tables.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20240423-sysctl-const-handler-v3-11-e0beccb836e2@weissschuh.net/ [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240508171337.work.861-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
It is unconventional to have a blank line between name-of-function and
description-of-args.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
NMI watchdog permanently consumes one hardware counters per CPU on the
system. For systems that use many hardware counters, this causes more
aggressive time multiplexing of perf events.
OTOH, some CPUs (mostly Intel) support "ref-cycles" event, which is rarely
used. Add kernel cmdline arg nmi_watchdog=rNNN to configure the watchdog
to use raw event. For example, on Intel CPUs, we can use "r300" to
configure the watchdog to use ref-cycles event.
If the raw event does not work, fall back to use "cycles".
[akpm@linux-foundation.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/20240430060236.1878002-2-song@kernel.org
Signed-off-by: Song Liu <song@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrii Nakryiko
Petr Mladek
Steven Rostedt (Google)
Linus Torvalds
Jesper Dangaard Brouer
Jakub Kicinski
Zheng Yejian
Mike Rapoport (IBM)
Justin Stitt
Yifan Hong
Dr. David Alan Gilbert
Thorsten Blum
Paul E. McKenney
Yuran Pereira
Vincent Donnefort
Rafael J. Wysocki
Beau Belgrave
Michael Ellerman
Puranjay Mohan
Paolo Bonzini
Alexander Lobakin
Kyle Meyer
Wardenjohn
Kees Cook
Andrew Morton
Song Liu