Commit Graph

2493 Commits

Author SHA1 Message Date
Jakub Kicinski
0140a7168f Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/freescale/fec.h
  7b15515fc1 ("Revert "fec: Restart PPS after link state change"")
  40c79ce13b ("net: fec: add stop mode support for imx8 platform")
https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/

drivers/pinctrl/pinctrl-ocelot.c
  c297561bc9 ("pinctrl: ocelot: Fix interrupt controller")
  181f604b33 ("pinctrl: ocelot: add ability to be used in a non-mmio configuration")
https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/

tools/testing/selftests/drivers/net/bonding/Makefile
  bbb774d921 ("net: Add tests for bonding and team address list management")
  152e8ec776 ("selftests/bonding: add a test for bonding lladdr target")
https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/

drivers/net/can/usb/gs_usb.c
  5440428b3d ("can: gs_usb: gs_can_open(): fix race dev->can.state condition")
  45dfa45f52 ("can: gs_usb: add RX and TX hardware timestamp support")
https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22 13:02:10 -07:00
Tony Lu
0227f058aa net/smc: Unbind r/w buffer size from clcsock and make them tunable
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for
send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem
in clcsock.

The buffer size from TCP socket doesn't fit SMC well. Generally, buffers
are usually larger than TCP for SMC-R/-D to get higher performance, for
they are different underlay devices and paths.

So this patch unbinds buffer size from TCP, and introduces two sysctl
knobs to tune them independently. Also, these knobs are per net
namespace and work for containers.

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22 12:58:21 +02:00
Wen Gu
77eee32514 net/smc: Introduce a specific sysctl for TEST_LINK time
SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).

But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.

So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.

[1] https://www.rfc-editor.org/rfc/rfc1122#page-101

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22 12:58:21 +02:00
Edward Cree
6fb4825e49 docs: net: add an explanation of VF (and other) Representors
There's no clear explanation of what VF Representors are for, their
 semantics, etc., outside of vendor docs and random conference slides.
Add a document explaining Representors and defining what drivers that
 implement them are expected to do.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220905135557.39233-1-ecree@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21 07:31:38 -07:00
Pablo Neira Ayuso
76b907ee00 netfilter: conntrack: remove nf_conntrack_helper documentation
This toggle has been already remove by b118509076 ("netfilter: remove
nf_conntrack_helper sysctl and modparam toggles").

Remove the documentation entry for this toggle too.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-20 23:50:03 +02:00
Kuniyuki Iwashima
d1e5e6408b tcp: Introduce optional per-netns ehash.
The more sockets we have in the hash table, the longer we spend looking
up the socket.  While running a number of small workloads on the same
host, they penalise each other and cause performance degradation.

The root cause might be a single workload that consumes much more
resources than the others.  It often happens on a cloud service where
different workloads share the same computing resource.

On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash
entries), after running iperf3 in different netns, creating 24Mi sockets
without data transfer in the root netns causes about 10% performance
regression for the iperf3's connection.

 thash_entries		sockets		length		Gbps
	524288		      1		     1		50.7
			   24Mi		    48		45.1

It is basically related to the length of the list of each hash bucket.
For testing purposes to see how performance drops along the length,
I set 131072 (1Mi / 8) to thash_entries, and here's the result.

 thash_entries		sockets		length		Gbps
        131072		      1		     1		50.7
			    1Mi		     8		49.9
			    2Mi		    16		48.9
			    4Mi		    32		47.3
			    8Mi		    64		44.6
			   16Mi		   128		40.6
			   24Mi		   192		36.3
			   32Mi		   256		32.5
			   40Mi		   320		27.0
			   48Mi		   384		25.0

To resolve the socket lookup degradation, we introduce an optional
per-netns hash table for TCP, but it's just ehash, and we still share
the global bhash, bhash2 and lhash2.

With a smaller ehash, we can look up non-listener sockets faster and
isolate such noisy neighbours.  In addition, we can reduce lock contention.

We can control the ehash size by a new sysctl knob.  However, depending
on workloads, it will require very sensitive tuning, so we disable the
feature by default (net.ipv4.tcp_child_ehash_entries == 0).  Moreover,
we can fall back to using the global ehash in case we fail to allocate
enough memory for a new ehash.  The maximum size is 16Mi, which is large
enough that even if we have 48Mi sockets, the average list length is 3,
and regression would be less than 1%.

We can check the current ehash size by another read-only sysctl knob,
net.ipv4.tcp_ehash_entries.  A negative value means the netns shares
the global ehash (per-netns ehash is disabled or failed to allocate
memory).

  # dmesg | cut -d ' ' -f 5- | grep "established hash"
  TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)

  # sysctl net.ipv4.tcp_ehash_entries
  net.ipv4.tcp_ehash_entries = 524288  # can be changed by thash_entries

  # sysctl net.ipv4.tcp_child_ehash_entries
  net.ipv4.tcp_child_ehash_entries = 0  # disabled by default

  # ip netns add test1
  # ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries
  net.ipv4.tcp_ehash_entries = -524288  # share the global ehash

  # sysctl -w net.ipv4.tcp_child_ehash_entries=100
  net.ipv4.tcp_child_ehash_entries = 100

  # ip netns add test2
  # ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries
  net.ipv4.tcp_ehash_entries = 128  # own a per-netns ehash with 2^n buckets

When more than two processes in the same netns create per-netns ehash
concurrently with different sizes, we need to guarantee the size in
one of the following ways:

  1) Share the global ehash and create per-netns ehash

  First, unshare() with tcp_child_ehash_entries==0.  It creates dedicated
  netns sysctl knobs where we can safely change tcp_child_ehash_entries
  and clone()/unshare() to create a per-netns ehash.

  2) Control write on sysctl by BPF

  We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on
  sysctl knobs.

Note that the global ehash allocated at the boot time is spread over
available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate
pages for each per-netns ehash depending on the current process's NUMA
policy.  By default, the allocation is done in the local node only, so
the per-netns hash table could fully reside on a random node.  Thus,
depending on the NUMA policy the netns is created with and the CPU the
current thread is running on, we could see some performance differences
for highly optimised networking applications.

Note also that the default values of two sysctl knobs depend on the ehash
size and should be tuned carefully:

  tcp_max_tw_buckets  : tcp_child_ehash_entries / 2
  tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128)

As a bonus, we can dismantle netns faster.  Currently, while destroying
netns, we call inet_twsk_purge(), which walks through the global ehash.
It can be potentially big because it can have many sockets other than
TIME_WAIT in all netns.  Splitting ehash changes that situation, where
it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets
in each netns.

With regard to this, we do not free the per-netns ehash in inet_twsk_kill()
to avoid UAF while iterating the per-netns ehash in inet_twsk_purge().
Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to
keep it protocol-family-independent.

In the future, we could optimise ehash lookup/iteration further by removing
netns comparison for the per-netns ehash.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20 10:21:50 -07:00
Vladimir Oltean
0773e3a851 docs: net: dsa: update information about multiple CPU ports
DSA now supports multiple CPU ports, explain the use cases that are
covered, the new UAPI, the permitted degrees of freedom, the driver API,
and remove some old "hanging fruits".

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-20 10:32:36 +02:00
David S. Miller
5947b7f794 linux-can-next-for-6.1-20220915
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMi3OwTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCtfkuQ2KDTXafhCACHLzDn9otKPWe+w6Lt1RSuhKvhbuhO
 XywQ4EBEUddOrqYarEuFiuWZMq1/PLGnkWVQotzElZR9HtkTUUetXgfsWHv39uo+
 SqUK7P+DnuT9AvvUkk1ZoyVYxs8FnVWoPlcBli+zXZCjtg/XYn/2qPGJlaNPovLv
 hzVokS/RVxlPIrQiNWVmkHyTb6LyLdLit802dtdaxKmQcUCgYVAiz+DwR0PwBEWs
 e1K046RIfl5QejpkVq+pIXpTGu1C4m2bv1umPCts1OLtBGkHf7Dwu9HmgWPDwY91
 0oJt/00NpQLgg77vnOJnv0M/TZE9cP9gp7zFh7b43qg0TpIzHhJJYJut
 =UEkq
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-next-for-6.1-20220915' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
Sept. 15, 2022, 8:19 a.m. UTC
Hello Jakub, hello David,

this is a pull request of 23 patches for net-next/master.

the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.

Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.

Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().

Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.

Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.

2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.

Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().

Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.

Dario Binacchi fixes his invalid email in the flexcan driver
documentation.

Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.

Yang Yingliang's patch switches the flexcan driver to dev_err_probe().

The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16 21:56:27 +01:00
Matthieu Baerts
0727a9a5fb Documentation: mptcp: fix pm_type formatting
When looking at the rendered HTML version, we can see 'pm_type' is not
displayed with a bold font:

  https://docs.kernel.org/5.19/networking/mptcp-sysctl.html

The empty line under 'pm_type' is then removed to have the same style as
the others.

Fixes: 6bb63ccc25 ("mptcp: Add a per-namespace sysctl to set the default path manager type")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20220906180404.1255873-2-matthieu.baerts@tessares.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-13 10:18:44 +02:00
Paolo Abeni
9f8f1933dc Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/freescale/fec.h
  7d650df99d ("net: fec: add pm_qos support on imx6q platform")
  40c79ce13b ("net: fec: add stop mode support for imx8 platform")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-08 18:38:30 +02:00
Dario Binacchi
318d8235bc docs: networking: device drivers: flexcan: fix invalid email
The Amarula contact info email address is wrong, so fix it up to use the
correct one.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220828134442.794990-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-06 08:32:12 +02:00
Sean Anderson
05ad5d4581 net: phy: Add 1000BASE-KX interface mode
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in
clause 70. Clause 73 autonegotiation is mandatory, and only full duplex
operation is supported.

Although at the PMA level this interface mode is identical to
1000BASE-X, it uses a different form of in-band autonegation. This
justifies a separate interface mode, since the interface mode (along
with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation
which will be used on a link. This results in more than just electrical
differences between the link modes.

With regard to 1000BASE-X, 1000BASE-KX holds a similar position to
SGMII: same signaling, but different autonegotiation. PCS drivers
(which typically handle in-band autonegotiation) may only support
1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to
configure serdes phys with phy_set_mode_ext. Due to the different
electrical standards (SFI or XFI vs Clause 70), they will likely want to
use different configuration. Adding a phy interface mode for
1000BASE-KX helps simplify configuration in these areas.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 14:30:42 +01:00
David S. Miller
e7506d344b rxrpc fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAmMQjRQACgkQ+7dXa6fL
 C2uGMBAAmb6+9iaxeAj6kE+/P4LCzUgfiIi0mH5QdK5JmCWDkhOvH1XCqHJwPIVb
 w/z5OGQm8CpaVb0nRC3pXMxdrG2OAmE6q6vYnJly30XRYdmv4tQ40SVwsq+OUmZ/
 dTdSgoFUYEb7WPwfGIdwpCQS0hmrXXDz5yRwq7DPmrcMEj374AKdADeJEQhvjd86
 NkhAp9bANNCwxIEouUntHtfZM+x3zFhzPh+giV+54WOKPLbqUYiG/AKo729oIgNf
 dGApdKjvfxbK/dx0fqfYXk19RpbJgyacrGrl5GQ+tZ1qkdL0PB1B1Q/nh/4COoTi
 Q7bTrZ6HyXGpQCMIwEY43dkdnnEdfaWLeXw4EqU0oHABckpCrzkv+HsV2kAPrEUS
 wsLPXEuNY4Lszbidc4+NKGIg82RQWrPjtxmslys6YdyO12cmOiyH51RePkeUvkKY
 C4erE+Kj7tNM58BHGN1TYsGhgHdAta5DWn+008Uc5KQh1WFJW+Wfk+VHtmNwSj4f
 PiPcO1TM9Sp42jRizlPQE8DF2KGSs13pwxtomvYpeufZKjZL29OnfMySH+bXfRU0
 JDzyUbeY1jMayADV3ovXQsP4KIIbKzL/m1LxBCtZ+R/zcxdij87pRIzFV8ZnnsZ1
 QBfWobozK1NNFofMES6LjocoHF0ZT3H8khpaYTOlZA0MjSwXM5o=
 =GW48
 -----END PGP SIGNATURE-----

Merge tag 'rxrpc-fixes-20220901' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc fixes
Here are some fixes for AF_RXRPC:

 (1) Fix the handling of ICMP/ICMP6 packets.  This is a problem due to
     rxrpc being switched to acting as a UDP tunnel, thereby allowing it to
     steal the packets before they go through the UDP Rx queue.  UDP
     tunnels can't get ICMP/ICMP6 packets, however.  This patch adds an
     additional encap hook so that they can.

 (2) Fix the encryption routines in rxkad to handle packets that have more
     than three parts correctly.  The problem is that ->nr_frags doesn't
     count the initial fragment, so the sglist ends up too short.

 (3) Fix a problem with destruction of the local endpoint potentially
     getting repeated.

 (4) Fix the calculation of the time at which to resend.
     jiffies_to_usecs() gives microseconds, not nanoseconds.

 (5) Fix AFS to work out when callback promises and locks expire based on
     the time an op was issued rather than the time the first reply packet
     arrives.  We don't know how long the server took between calculating
     the expiry interval and transmitting the reply.

 (6) Given (5), rxrpc_get_reply_time() is no longer used, so remove it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02 12:45:32 +01:00
Jakub Kicinski
60ad1100d5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
tools/testing/selftests/net/.gitignore
  sort the net-next version and use it

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01 12:58:02 -07:00
David Howells
21457f4a91 rxrpc: Remove rxrpc_get_reply_time() which is no longer used
Remove rxrpc_get_reply_time() as that is no longer used now that the call
issue time is used instead of the reply time.

Signed-off-by: David Howells <dhowells@redhat.com>
2022-09-01 11:44:13 +01:00
Eric Dumazet
79e3602caa tcp: make global challenge ack rate limitation per net-ns and default disabled
Because per host rate limiting has been proven problematic (side channel
attacks can be based on it), per host rate limiting of challenge acks ideally
should be per netns and turned off by default.

This is a long due followup of following commits:

083ae30828 ("tcp: enable per-socket rate limiting of all 'challenge acks'")
f2b2c582e8 ("tcp: mitigate ACK loops for connections as tcp_sock")
75ff39ccc1 ("tcp: make challenge acks less predictable")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31 19:56:48 -07:00
Randy Dunlap
404a5ad720 Documentation: networking: correct possessive "its"
Change occurrences of "it's" that are possessive to "its"
so that they don't read as "it is".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220829235414.17110-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31 12:36:08 -07:00
Fernando Fernandez Mancera
fa8724478e Documentation: bonding: clarify supported modes for tlb_dynamic_lb
tlb_dynamic_lb bonding option is compatible with balance-tlb and balance-alb
modes. In order to be consistent with other option documentation, it should
mention both modes not only balance-tlb.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220826154738.4039-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30 23:17:54 -07:00
Mengyuan Lou
e79e40c83b net: ngbe: Add build support for ngbe
Add build options and guidance doc.
Initialize pci device access for Wangxun Gigabit Ethernet devices.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://lore.kernel.org/r/20220826034609.51854-1-mengyuanlou@net-swift.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-30 12:32:51 +02:00
David S. Miller
77baa37a9b Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-08-24 (ice)

This series contains updates to ice driver only.

Marcin adds support for TC parsing on TTL and ToS fields.

Anatolli adds support for devlink port split command to allow
configuration of various port configurations.

Jake allows for passing and writing an additional NVM write activate
field by expanding current cmd_flag.

Ani makes PHY debug output more readable.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26 11:39:00 +01:00
Jiri Pirko
77a70f9c5b Documentation: devlink: fix the locking section
As all callbacks are converted now, fix the text reflecting that change.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220823070213.1008956-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24 19:32:02 -07:00
Anatolii Gerasymenko
26d1c571e1 ice: Implement devlink port split operations
Allow to configure port split options using the devlink port split
interface. Support port splitting only for port 0, as the FW has
a predefined set of available port split options for the whole device.

Add ice_devlink_port_options_print() function to print the table with
all available FW port split options. It will be printed after each port
split and unsplit command.

Add documentation for devlink port split interface usage for the ice
driver.

Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-24 08:45:55 -07:00
Stephen Hemminger
1202cdd665 Remove DECnet support from kernel
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.

It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.

Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.

The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22 14:26:30 +01:00
Maxime Chevallier
5e61fe157a net: phy: Introduce QUSGMII PHY mode
The QUSGMII mode is a derivative of Cisco's USXGMII standard. This
standard is pretty similar to SGMII, but allows for faster speeds, and
has the build-in bits for Quad and Octa variants (like QSGMII).

The main difference with SGMII/QSGMII is that USXGMII/QUSGMII re-uses
the preamble to carry various information, named 'Extensions'.

As of today, the USXGMII standard only mentions the "PCH" extension,
which is used to convey timestamps, allowing in-band signaling of PTP
timestamps without having to modify the frame itself.

This commit adds support for that mode. When no extension is in use, it
behaves exactly like QSGMII, although it's not compatible with QSGMII.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22 13:46:26 +01:00
Jakub Kicinski
bf294c3fea Revert "Merge branch 'wwan-t7xx-fw-flashing-and-coredump-support'"
This reverts commit 5417197dd5, reversing
changes made to 0630f64d25.

Reverting to allow addressing review comments.

Link: https://lore.kernel.org/all/4c5dbea0-52a9-1c3d-7547-00ea54c90550@linux.intel.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-19 15:30:05 -07:00
M Chetan Kumar
b0bc1709b7 net: wwan: t7xx: Devlink documentation
Document the t7xx devlink commands usage for fw flashing &
coredump collection.

Refer to t7xx.rst file for details.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-17 11:53:53 +01:00
Vladimir Oltean
cba8d8f57d docs: net: bonding: remove mentions of trans_start
ARP monitoring no longer depends on dev->last_rx or dev_trans_start(),
so delete this information.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-03 19:20:13 -07:00
Christophe JAILLET
6f63d04473 doc: sfp-phylink: Fix a broken reference
The commit in Fixes: has changed a .txt file into a .yaml file. Update the
documentation accordingly.

While at it add some `` around some file names to improve the output.

Fixes: 70991f1e68 ("dt-bindings: net: convert sff,sfp to dtschema")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/be3c7e87ca7f027703247eccfe000b8e34805094.1659247114.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-02 21:45:07 -07:00
Bagas Sanjaya
4ff7c8fc81 Documentation: devlink: add add devlink-selftests to the table of contents
Commit 08f588fa30 ("devlink: introduce framework for selftests") adds
documentation for devlink selftests framework, but it is missing from
table of contents.

Add it.

Link: https://lore.kernel.org/linux-doc/202207300406.CUBuyN5i-lkp@intel.com/
Fixes: 08f588fa30 ("devlink: introduce framework for selftests")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220730022058.16813-1-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01 12:21:53 -07:00
Guillaume Nault
1c7249e4af Documentation: Describe net.ipv4.tcp_reflect_tos.
The tcp_reflect_tos option was introduced in Linux 5.10 but was still
undocumented.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-29 12:10:21 +01:00
Vikas Gupta
08f588fa30 devlink: introduce framework for selftests
Add a framework for running selftests.
Framework exposes devlink commands and test suite(s) to the user
to execute and query the supported tests by the driver.

Below are new entries in devlink_nl_ops
devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported
selftests by the drivers.
devlink_nl_cmd_selftests_run: To execute selftests. Users can
provide a test mask for executing group tests or standalone tests.

Documentation/networking/devlink/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS

Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28 21:56:53 -07:00
Jakub Kicinski
272ac32f56 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28 18:21:16 -07:00
Jiri Pirko
3fc0c51905 mlxsw: core_linecards: Expose device PSID over device info
Use tunneled MGIR to obtain PSID of line card device and extend
device_info_get() op to fill up the info with that.

Example:

$ devlink dev info auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0:
  versions:
      fixed:
        hw.revision 0
        fw.psid MT_0000000749
      running:
        ini.version 4
        fw 19.2010.1312

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 13:56:36 -07:00
Jiri Pirko
4da0eb2a75 mlxsw: core_linecards: Probe active line cards for devices and expose FW version
In case the line card is active, go over all possible existing
devices (gearboxes) on it and expose FW version of the flashable one.

Example:

$ devlink dev info auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0:
  versions:
      fixed:
        hw.revision 0
      running:
        ini.version 4
        fw 19.2010.1312

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 13:56:10 -07:00
Jiri Pirko
5ba325fec5 mlxsw: core_linecards: Expose HW revision and INI version
Implement info_get() to expose HW revision of a linecard and loaded INI
version.

Example:

$ devlink dev info auxiliary/mlxsw_core.lc.0
auxiliary/mlxsw_core.lc.0:
  versions:
      fixed:
        hw.revision 0
      running:
        ini.version 4

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 13:56:06 -07:00
Xin Long
aa709da0e0 Documentation: fix sctp_wmem in ip-sysctl.rst
Since commit 1033990ac5 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.

v1->v2:
  - Improve the description as Marcelo suggested.

Fixes: 1033990ac5 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-24 21:41:58 +01:00
Jakub Kicinski
502c6f8ced Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-07-21

This series contains updates to ice driver only.

Karol adds implementation for GNSS write; data is written to the GNSS
module through TTY device using u-blox UBX protocol.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: add write functionality for GNSS TTY
  ice: add i2c write command
====================

Link: https://lore.kernel.org/r/20220721202842.3276257-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 21:55:57 -07:00
Karol Kolacinski
d6b98c8d24 ice: add write functionality for GNSS TTY
Add the possibility to write raw bytes to the GNSS module through the
first TTY device. This allows user to configure the module.

Create a second read-only TTY device.

Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21 13:25:17 -07:00
Jakub Kicinski
6e0e846ee2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21 13:03:39 -07:00
Xin Long
c6b10de537 Documentation: fix udp_wmem_min in ip-sysctl.rst
UDP doesn't support tx memory accounting, and sysctl udp_wmem_min
is not really used anywhere. So we should fix the description in
ip-sysctl.rst accordingly.

Fixes: 95766fff6b ("[UDP]: Add memory accounting.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/c880a963d9b1fb5f442ae3c9e4dfa70d45296a16.1658167019.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19 17:34:53 -07:00
Vladimir Oltean
7b02f40350 docs: net: dsa: mention that VLANs are now refcounted on shared ports
The blamed commit updated the way in which VLANs are handled at the
cross-chip notifier layer and didn't update the documentation to say
that. Fix it.

Fixes: 134ef2388e ("net: dsa: add explicit support for host bridge VLANs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
6ba1a4aa59 docs: net: dsa: delete misinformation about -EOPNOTSUPP for FDB/MDB/VLAN
Returning -EOPNOTSUPP does *NOT* mean anything special.

port_vlan_add() is actually called from 2 code paths, one is
vlan_vid_add() from 8021q module and the other is
br_switchdev_port_vlan_add() from switchdev.

The bridge has a wrapper __vlan_vid_add() which first tries via
switchdev, then if that returns -EOPNOTSUPP, tries again via the VLAN RX
filters in the 8021q module. But DSA doesn't distinguish between one
call path and the other when calling the driver's port_vlan_add(), so if
the driver returns -EOPNOTSUPP to switchdev, it also returns -EOPNOTSUPP
to the 8021q module. And the latter is a hard error.

port_fdb_add() is called from the deferred dsa_owq only, so obviously
its return code isn't propagated anywhere, and cannot be interpreted in
any way.

The return code from port_mdb_add() is propagated to the bridge, but
again, this doesn't do anything special when -EOPNOTSUPP is returned,
but rather, br_switchdev_mdb_notify() returns void.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
ea7006a7aa docs: net: dsa: re-explain what port_fdb_dump actually does
Switchdev has changed radically from its initial implementation, and the
currently provided definition is incorrect and very confusing.

Rewrite it in light of what it actually does.

Fixes: 2bedde1abb ("net: dsa: Move FDB dump implementation inside DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
4e9d9bb6df docs: net: dsa: add a section for address databases
The given definition for what VID 0 represents in the current
port_fdb_add and port_mdb_add is blatantly wrong. Delete it and explain
the concepts surrounding DSA's understanding of FDB isolation.

Fixes: c26933639b ("net: dsa: request drivers to perform FDB isolation")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
7f75d3dd4f docs: net: dsa: delete port_mdb_dump
This was deleted in 2017, stop documenting it.

Fixes: dc0cbff3ff ("net: dsa: Remove redundant MDB dump support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
e465d507c7 docs: net: dsa: remove port_vlan_dump
This was deleted in 2017, delete the obsolete documentation.

Fixes: c069fcd82c ("net: dsa: Remove support for bypass bridge port attributes/vlan set")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
3083623948 docs: net: dsa: remove port_bridge_tx_fwd_offload
We've changed the API through which we can offload the bridge TX
forwarding process. Update the documentation in light of the removal of
2 DSA switch ops.

Fixes: b079922ba2 ("net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_join")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
0cb8682ebf docs: net: dsa: document port_fast_age
The provided information about FDB flushing is not really up to date.
The DSA core automatically calls port_fast_age() when necessary, and
drivers should just implement that rather than hooking it to
port_bridge_leave, port_stp_state_set and others.

Fixes: 732f794c1b ("net: dsa: add port fast ageing")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
3c87237ecd docs: net: dsa: document port_setup and port_teardown
These methods were added without being documented, fix that.

Fixes: fd292c189a ("net: dsa: tear down devlink port regions when tearing down the devlink port on error")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
b763f50dc1 docs: net: dsa: document the teardown method
A teardown method was added to dsa_switch_ops without being documented.
Do so now.

Fixes: 5e3f847a02 ("net: dsa: Add teardown callback for drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
d6a0336add docs: net: dsa: document change_tag_protocol
Support for changing the tagging protocol was added without this
operation being documented; do so now.

Fixes: 53da0ebaad ("net: dsa: allow changing the tag protocol via the "tagging" device attribute")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
c56313a42a docs: net: dsa: add more info about the other arguments to get_tag_protocol
Changes were made to the prototype of get_tag_protocol without
describing at a high level what they are about. Update the documentation
to explain that.

Fixes: 5ed4e3eb02 ("net: dsa: Pass a port to get_tag_protocol()")
Fixes: 4d776482ec ("net: dsa: Get information about stacked DSA protocol")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:37 +01:00
Vladimir Oltean
c3f0e84d10 docs: net: dsa: rename tag_protocol to get_tag_protocol
Since the blamed commit, the enum was turned into a function pointer and
also renamed. Update the documentation.

Fixes: 7b314362a2 ("net: dsa: Allow the DSA driver to indicate the tag protocol")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:36 +01:00
Vladimir Oltean
54367831c5 docs: net: dsa: document the shutdown behavior
Document the changes that took place in the DSA core in the blamed
commit.

Fixes: 0650bf52b3 ("net: dsa: be compatible with masters which unregister on shutdown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:36 +01:00
Vladimir Oltean
19b3b13c93 docs: net: dsa: update probing documentation
Since the blamed commit we don't have register_switch_driver() and
unregister_switch_driver() anymore. Additionally, the expected
dsa_register_switch() and dsa_unregister_switch() calls aren't
documented.

Update the probing section with the details of how things are currently
done.

Fixes: 93e86b3bc8 ("net: dsa: Remove legacy probing support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 12:44:36 +01:00
Wen Gu
4bc5008e43 net/smc: Introduce a sysctl for setting SMC-R buffer type
This patch introduces the sysctl smcr_buf_type for setting
the type of SMC-R sndbufs and RMBs.

Valid values includes:

- SMCR_PHYS_CONT_BUFS, which means use physically contiguous
  buffers for better performance and is the default value.

- SMCR_VIRT_CONT_BUFS, which means use virtually contiguous
  buffers in case of physically contiguous memory is scarce.

- SMCR_MIXED_BUFS, which means first try to use physically
  contiguous buffers. If not available, then use virtually
  contiguous buffers.

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18 11:19:17 +01:00
Jaehee Park
aaa5f515b1 net: ipv6: new accept_untracked_na option to accept na only if in-network
This patch adds a third knob, '2', which extends the
accept_untracked_na option to learn a neighbor only if the src ip is
in the same subnet as an address configured on the interface that
received the neighbor advertisement. This is similar to the arp_accept
configuration for ipv4.

Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15 18:55:50 -07:00
Jaehee Park
e68c5dcf0a net: ipv4: new arp_accept option to accept garp only if in-network
In many deployments, we want the option to not learn a neighbor from
garp if the src ip is not in the same subnet as an address configured
on the interface that received the garp message. net.ipv4.arp_accept
sysctl is currently used to control creation of a neigh from a
received garp packet. This patch adds a new option '2' to
net.ipv4.arp_accept which extends option '1' by including the subnet
check.

Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15 18:55:49 -07:00
Jakub Kicinski
816cd16883 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
include/net/sock.h
  310731e2f1 ("net: Fix data-races around sysctl_mem.")
  e70f3c7012 ("Revert "net: set SK_MEM_QUANTUM to 4096"")
https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/

net/ipv4/fib_semantics.c
  747c143072 ("ip: fix dflt addr selection for connected nexthop")
  d62607c3fe ("net: rename reference+tracking helpers")

net/tls/tls.h
include/net/tls.h
  3d8c51b25a ("net/tls: Check for errors in tls_device_init")
  5879031423 ("tls: create an internal header")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14 15:27:35 -07:00
Kuniyuki Iwashima
e49e4aff7e ipv4: Fix data-races around sysctl_ip_dynaddr.
While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13 12:56:49 +01:00
Jakub Kicinski
bb56cea9ab tls: rx: add counter for NoPad violations
As discussed with Maxim add a counter for true NoPad violations.
This should help deployments catch unexpected padded records vs
just control records which always need re-encryption.

https: //lore.kernel.org/all/b111828e6ac34baad9f4e783127eba8344ac252d.camel@nvidia.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11 19:48:33 -07:00
Kuniyuki Iwashima
dd44f04b92 cipso: Fix data-races around sysctl.
While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.

Fixes: 446fda4f26 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-08 12:10:33 +01:00
Jakub Kicinski
88527790c0 tls: rx: add sockopt for enabling optimistic decrypt with TLS 1.3
Since optimisitic decrypt may add extra load in case of retries
require socket owner to explicitly opt-in.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06 12:56:35 +01:00
Jakub Kicinski
f05643a0f6 eth: remove neterion/vxge
The last meaningful change to this driver was made by Jon in 2011.
As much as we'd like to believe that this is because the code is
perfect the chances are nobody is using this hardware.

Because of the size of this driver there is a nontrivial maintenance
cost to keeping this code around, in the last 2 years we're averaging
more than 1 change a month. Some of which require nontrivial review
effort, see commit 877fe9d49b ("Revert "drivers/net/ethernet/neterion/vxge:
Fix a use-after-free bug in vxge-main.c"") for example.

Let's try to remove this driver. In general, IMHO, we need to
establish a clear path for shedding dead code. It will be hard
to unless we have some experience trying to delete stuff.

Link: https://lore.kernel.org/r/20220701044234.706229-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-05 15:26:31 -07:00
David S. Miller
a48e789dd2 linux-can-next-for-5.20-20220703
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmLBZ3sTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCtfkuQ2KDTXe2oB/wJ1T3/1tZ0+Jx7Hk84MXUTO9W05KqH
 sie+yehu9A5+RNlA6/zRJBEmA4pyvOjtN0qynh3f25LfIesxUC5Tma1Epzp/Gnay
 cYBrypD2iKKMNpJoiBtVVXh6Kin7+5oSLr4zxeaYcXjGfUlPIOqMnrwbGu/5ZtMH
 7FL092tkQ/S1j/LDTiZk+OdjpuaM9D/7Z0t0iJ6NJb70/VEk6K3bY5XdmjLayYIJ
 IBmxBbUXvBevVRDiSyMqNzA+RzQ5egrTrE3gPZZPneISN3Qu6cG+5xUqYGOxyjrJ
 hzinoC48wEEHEMAeiM28AXjv9voIPvSoqeOvgZmSS0JTkfPZqirYpdzd
 =9458
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-next-for-5.20-20220703' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-07-03

this is a pull request of 15 patches for net-next/master.

The first 2 patches are by Max Staudt and add the can327 serial CAN
driver along with a new line discipline ID.

The next patch is by me an fixes a typo in the ctucanfd driver.

The last 12 patches are by Dario Binacchi and integrate slcan CAN
serial driver better into the existing CAN driver API.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-03 12:32:15 +01:00
Yuwei Wang
211da42eaa net, neigh: introduce interval_probe_time_ms for periodic probe
commit ed6cd6a178 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the
system work queue hog CPU to 100%, and further more we should introduce
a new option used by periodic probe

Signed-off-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30 13:14:35 +02:00
Jiawen Wu
3ce7547e5b net: txgbe: Add build support for txgbe
Add doc build infrastructure for txgbe driver.
Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20220628095530.889344-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29 20:57:06 -07:00
Max Staudt
43da2f0762 can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters
This is the can327 driver. It does a surprisingly good job at turning
ELM327 based OBD-II interfaces into cheap CAN interfaces for simple
homebrew projects.

Please see the included documentation for details and limitations:
Documentation/networking/device_drivers/can/can327.rst

Link: https://lore.kernel.org/all/20220618195031.10975-1-max@enpas.org
Signed-off-by: Max Staudt <max@enpas.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: minor coding style improvements]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-27 17:00:04 +02:00
David S. Miller
9dd094ee14 linux-can-next-for-5.20-20220625
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmK28FETHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCtfkuQ2KDTXdl9B/4h4emFRjxz0BuorLEPezEHbW3ULFES
 CqPOgEOj7YalEqECOYrZLf4tmQQEbWcRrKIRmBp7vVLDfSwVtY7fsjUlh0rrbpDh
 zXF3uCQDkm07Sy1upBbIXFCU7OBETSbtPKWF87YOcJVWpQbkwacPiokapAnnNy/J
 21Sn4dyGADnYxis5QBTu7r5sCF3rxAOBJ+2SrdOeYQ+gdJYlWxPSGL4X+87fYkOE
 3b5qR/8gzkGzDEG5PDnyiYgVCprUioE4WZiY7hKmcjGQBAy2q3NOgtz8m71PMI7v
 IdDapf85SeLZbO96CXpJBokUthb2HefFMJv0FWwF3uHV93kWSp8ge+VY
 =TWdX
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-next-for-5.20-20220625' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-06-25

this is a pull request of 22 patches for net-next/master.

The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.

The next patch is by me and fixes a typo in the m_can driver.

Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.

The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.

Max Staudt's patch fixes a reference in the networking/can.rst
documentation.

Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.

Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.

Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.

The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-27 11:47:18 +01:00
Hangbin Liu
0a2ff7cc8a Bonding: add per-port priority for failover re-selection
Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.

This option could only be configured via netlink.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24 11:27:59 +01:00
Jakub Kicinski
9cbc991126 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16 20:13:52 -07:00
Jakub Kicinski
7e5e8ec7db docs: tls: document the TLS_TX_ZEROCOPY_RO
Add missing documentation for the TLS_TX_ZEROCOPY_RO opt-in.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220610180212.110590-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-14 11:14:17 +02:00
Jonathan Neuschäfer
9cc8ea99bf docs: networking: phy: Fix a typo
Write "to be operated" instead of "to be operate".

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220610072809.352962-1-j.neuschaefer@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13 23:12:44 -07:00
Max Staudt
a9cf02c6a6 can: Break loopback loop on loopback documentation
There are two sections called "Local Loopback of Sent Frames". One was
meant to link to the other, but pointed at itself instead.

Link: https://lore.kernel.org/all/20220611171155.9090-1-max@enpas.org
Fixes: 7d59773945 ("can: migrate documentation to restructured text")
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-06-11 22:40:13 +02:00
Xin Long
249eddaf65 Documentation: add description for net.sctp.ecn_enable
Describe it in networking/ip-sysctl.rst like other SCTP options.

Fixes: 2f5268a924 ("sctp: allow users to set netns ecn flag with sysctl")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10 22:18:20 -07:00
Xin Long
e65775fdd3 Documentation: add description for net.sctp.intl_enable
Describe it in networking/ip-sysctl.rst like other SCTP options.
We need to document this especially as when using the feature
of User Message Interleaving, some socket options also needs
to be set.

Fixes: 463118c34a ("sctp: support sysctl to allow users to use stream interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10 22:18:20 -07:00
Xin Long
c349ae5f83 Documentation: add description for net.sctp.reconf_enable
Describe it in networking/ip-sysctl.rst like other SCTP options.

Fixes: c0d8bab6ae ("sctp: add get and set sockopt for reconf_enable")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10 22:18:20 -07:00
Arun Ajith S
3e0b8f529c net/ipv6: Expand and rename accept_unsolicited_na to accept_untracked_na
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.

Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.

Fixes: f9a2fb7331 ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131")
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31 11:36:57 +02:00
Jakub Kicinski
32c53420d2 eth: de4x5: remove support for Generic DECchip & DIGITAL EtherWORKS PCI/EISA
Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from Al
15 years ago which could potentially be fixing a real bug.

The driver is using virt_to_bus() and is a real magnet for pointless
cleanups. It seems unlikely to have real users. Let's try to shed
this maintenance burden.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-23 11:43:51 +01:00
Jakub Kicinski
7ebe52f555 docs: change the title of networking docs
The current title of our section of the documentation is
Linux Networking Documentation. Since we're describing
a section of Linux Documentation repeating those two
words seems redundant.

Link: https://lore.kernel.org/r/20220518234346.2088436-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19 18:44:57 -07:00
Akira Yokosawa
ba3e2eaef1 docs: ctucanfd: Use 'kernel-figure' directive instead of 'figure'
Two issues were observed in the ReST doc added by commit c3a0addefb
("docs: ctucanfd: CTU CAN FD open-source IP core documentation.")
with Sphinx versions 2.4.4 and 4.5.0.

The plain "figure" directive broke "make pdfdocs" due to a missing
PDF figure.  For conversion of SVG -> PDF to work, the "kernel-figure"
directive, which is an extension for kernel documentation, should
be used instead.

The directive of "code:: raw" causes a warning from both
"make htmldocs" and "make pdfdocs", which reads:

    [...]/can/ctu/ctucanfd-driver.rst:75: WARNING: Pygments lexer name
    'raw' is not known

A plain literal-block marker should suffice where no syntax
highlighting is intended.

Fix the issues by using suitable directive and marker.

Fixes: c3a0addefb ("docs: ctucanfd: CTU CAN FD open-source IP core documentation.")
Link: https://lore.kernel.org/all/5986752a-1c2a-5d64-f91d-58b1e6decd17@gmail.com
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Martin Jerabek <martin.jerabek01@gmail.com>
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-16 22:11:11 +02:00
David S. Miller
1a01a07517 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

This is v2 including deadlock fix in conntrack ecache rework
reported by Jakub Kicinski.

The following patchset contains Netfilter updates for net-next,
mostly updates to conntrack from Florian Westphal.

1) Add a dedicated list for conntrack event redelivery.

2) Include event redelivery list in conntrack dumps of dying type.

3) Remove per-cpu dying list for event redelivery, not used anymore.

4) Add netns .pre_exit to cttimeout to zap timeout objects before
   synchronize_rcu() call.

5) Remove nf_ct_unconfirmed_destroy.

6) Add generation id for conntrack extensions for conntrack
   timeout and helpers.

7) Detach timeout policy from conntrack on cttimeout module removal.

8) Remove __nf_ct_unconfirmed_destroy.

9) Remove unconfirmed list.

10) Remove unconditional local_bh_disable in init_conntrack().

11) Consolidate conntrack iterator nf_ct_iterate_cleanup().

12) Detect if ctnetlink listeners exist to short-circuit event
    path early.

13) Un-inline nf_ct_ecache_ext_add().

14) Add nf_conntrack_events autodetect ctnetlink listener mode
    and make it default.

15) Add nf_ct_ecache_exist() to check for event cache extension.

16) Extend flowtable reverse route lookup to include source, iif,
    tos and mark, from Sven Auhagen.

17) Do not verify zero checksum UDP packets in nf_reject,
    from Kevin Mitchell.

====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16 10:10:37 +01:00
Florian Westphal
90d1daa458 netfilter: conntrack: add nf_conntrack_events autodetect mode
This adds the new nf_conntrack_events=2 mode and makes it the
default.

This leverages the earlier flag in struct net to allow to avoid
the event extension as long as no event listener is active in
the namespace.

This avoids, for most cases, allocation of ct->ext area.
A followup patch will take further advantage of this by avoiding
calls down into the event framework if the extension isn't present.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-05-13 18:56:28 +02:00
Jakub Kicinski
03dcb90dbf net: appletalk: remove Apple/Farallon LocalTalk PC support
Looks like all the changes to this driver had been tree-wide
refactoring since git era begun. The driver is using virt_to_bus()
we should make it use more modern DMA APIs but since it's unlikely
to be getting any use these days delete it instead. We can always
revert to bring it back.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-11 13:08:38 +01:00
Jakub Kicinski
9facd94114 skbuff: render the checksum comment to documentation
Long time ago Tom added a giant comment to skbuff.h explaining
checksums. Now that we have a place in Documentation for skbuff
docs we should render it. Sprinkle some markup while at it.

Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-10 17:48:37 -07:00
Jakub Kicinski
9ec7ea1462 skbuff: rewrite the doc for data-only skbs
The comment about shinfo->dataref split is really unhelpful,
at least to me. Rewrite it and render it to skb documentation.

Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-10 17:48:35 -07:00
Jakub Kicinski
ddccc9ef55 skbuff: add a basic intro doc
Add basic skb documentation. It's mostly an intro to the subsequent
patches - it would looks strange if we documented advanced topics
without covering the basics in any way.

Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-10 17:48:31 -07:00
Ricardo Martinez
c9933d494c net: wwan: t7xx: Add maintainers and documentation
Adds maintainers and documentation for MediaTek t7xx 5G WWAN modem
device driver.

Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09 10:51:59 +01:00
Jakub Kicinski
c4a67a21a6 Revert "Merge branch 'mlxsw-line-card-model'"
This reverts commit 5e927a9f4b, reversing
changes made to cfc1d91a7d.

The discussion is still ongoing so let's remove the uAPI
until the discussion settles.

Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 15:47:23 -07:00
Pavel Pisa
75790ef3b7 docs: networking: device drivers: can: ctucanfd: update author e-mail
This patch updates the author's email address.

Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz
Cc: Odrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
[mkl: split into separate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02 09:24:41 +02:00
Pavel Pisa
5f02ecbe08 docs: networking: device drivers: can: add ctucanfd to index
This patch adds the ctucanfd-driver document to the index.

Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
[mkl: split into separate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02 09:24:40 +02:00
Mat Martineau
6bb63ccc25 mptcp: Add a per-namespace sysctl to set the default path manager type
The new net.mptcp.pm_type sysctl determines which path manager will be
used by each newly-created MPTCP socket.

v2: Handle builds without CONFIG_SYSCTL
v3: Clarify logic for type-specific PM init (Geliang Tang and Paolo Abeni)

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29 17:25:14 -07:00
Jakub Kicinski
bc6df26f1f net: wan: remove support for Z85230-based devices
Looks like all the changes to this driver had been automated
churn since git era begun. The driver is using virt_to_bus(),
it's just a maintenance burden unlikely to have any users.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27 12:22:56 +01:00
Jiri Pirko
e932b4bdbd mlxsw: core_linecards: Expose device FW version over device info
Extend MDDQ to obtain FW version of line card device and implement
device_info_get() op to fill up the info with that.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25 10:42:29 +01:00
Jiri Pirko
3b37130f48 mlxsw: core_linecards: Expose HW revision and INI version
Implement info_get() to expose HW revision of a linecard and loaded INI
version.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25 10:42:28 +01:00
Jiri Pirko
28b2d1f1ac devlink: introduce line card device info infrastructure
Extend the line card info message with information (e.g., FW version)
about devices found on the line card.

Example:
$ devlink lc info pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8
    versions:
        fixed:
          hw.revision 0
        running:
          ini.version 4
    devices:
      device 0
        versions:
            running:
              fw 19.2010.1310
      device 1
        versions:
            running:
              fw 19.2010.1310
      device 2
        versions:
            running:
              fw 19.2010.1310
      device 3
        versions:
            running:
              fw 19.2010.1310

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25 10:42:28 +01:00
Jiri Pirko
276910aecc devlink: introduce line card info get message
Allow the driver to provide per line card info get op to fill-up info,
similar to the "devlink dev info".

Example:

$ devlink lc info pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8
    versions:
        fixed:
          hw.revision 0
        running:
          ini.version 4

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25 10:42:28 +01:00
Paolo Abeni
f70925bf99 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
  d08ed85256 ("net: lan966x: Make sure to release ptp interrupt")
  c834963932 ("net: lan966x: Add FDMA functionality")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-22 09:56:00 +02:00
Nicolas Dichtel
c6a4254c18 doc/ip-sysctl: add bc_forwarding
Let's describe this sysctl.

Fixes: 5cbf777cfd ("route: add support for directed broadcast forwarding")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20 10:31:43 +01:00
Pavel Pisa
c3a0addefb docs: ctucanfd: CTU CAN FD open-source IP core documentation.
CTU CAN FD IP core documentation based on Martin Jeřábek's diploma theses
Open-source and Open-hardware CAN FD Protocol Support
https://dspace.cvut.cz/handle/10467/80366
.

Link: https://lore.kernel.org/all/692b965999ff6c272239df0fe1c76b68d02b134d.1647932262.git.pisa@cmp.felk.cvut.cz
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Martin Jerabek <martin.jerabek01@gmail.com>
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-04-19 17:12:14 +02:00
Luiz Angelo Daros de Luca
a997157e42 docs: net: dsa: describe issues with checksum offload
DSA tags before IP header (categories 1 and 2) or after the payload (3)
might introduce offload checksum issues.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18 13:29:02 +01:00
Jiri Pirko
fc9f50d5b3 devlink: implement line card active state
Allow driver to mark a line card as active. Expose this state to the
userspace over devlink netlink interface with proper notifications.
'active' state means that line card was plugged in after
being provisioned.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18 11:00:18 +01:00
Jiri Pirko
fcdc8ce23a devlink: implement line card provisioning
In order to be able to configure all needed stuff on a port/netdevice
of a line card without the line card being present, introduce line card
provisioning. Basically by setting a type, provisioning process will
start and driver is supposed to create a placeholder for instances
(ports/netdevices) for a line card type.

Allow the user to query the supported line card types over line card
get command. Then implement two netlink command SET to allow user to
set/unset the card type.

On the driver API side, add provision/unprovision ops and supported
types array to be advertised. Upon provision op call, the driver should
take care of creating the instances for the particular line card type.
Introduce provision_set/clear() functions to be called by the driver
once the provisioning/unprovisioning is done on its side. These helpers
are not to be called directly due to the async nature of provisioning.

Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
  lc 1 state unprovisioned
    supported_types:
       16x100G
  lc 2 state unprovisioned
    supported_types:
       16x100G
  lc 3 state unprovisioned
    supported_types:
       16x100G
  lc 4 state unprovisioned
    supported_types:
       16x100G
  lc 5 state unprovisioned
    supported_types:
       16x100G
  lc 6 state unprovisioned
    supported_types:
       16x100G
  lc 7 state unprovisioned
    supported_types:
       16x100G
  lc 8 state unprovisioned
    supported_types:
       16x100G

$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8 state active type 16x100G
    supported_types:
       16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4

$ devlink lc set pci/0000:01:00.0 lc 8 notype

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18 11:00:18 +01:00
Arun Ajith S
f9a2fb7331 net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.

Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17 13:23:49 +01:00
Jie Wang
4dc84c06a3 net: ethtool: extend ringparam set/get APIs for tx_push
Currently tx push is a standard driver feature which controls use of a fast
path descriptor push. So this patch extends the ringparam APIs and data
structures to support set/get tx push by ethtool -G/g.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15 11:41:35 -07:00
Paolo Abeni
edf45f007a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-04-15 09:26:00 +02:00
Veerasenareddy Burru
862cd659a6 octeon_ep: Add driver framework and device initialization
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC.

Add implementation to load module, initilaize, register network device,
cleanup and unload module.

Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13 12:56:32 +01:00
Gal Pressman
2cd1881b98 bonding: Update layer2 and layer2+3 hash formula documentation
When using layer2 or layer2+3 hash, only the 5th byte of the MAC
addresses is used.

Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08 12:13:56 +01:00
Bjorn Helgaas
5a48b7433a docs: net: dsa: fix minor grammar and punctuation issues
Fix a few typos and minor grammatical issues.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-03 13:06:11 +01:00
Jakub Kicinski
8df0136376 docs: netdev: move the netdev-FAQ to the process pages
The documentation for the tip tree is really in quite a similar
spirit to the netdev-FAQ. Move the netdev-FAQ to the process docs
as well.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:39 +02:00
Jakub Kicinski
08767a26f0 docs: netdev: broaden the new vs old code formatting guidelines
Convert the "should I use new or old comment formatting" to cover
all formatting. This makes the question itself shorter.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:39 +02:00
Jakub Kicinski
99eba4e5cb docs: netdev: call out the merge window in tag checking
Add the most important case to the question about "where are we
in the cycle" - the case of net-next being closed.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:39 +02:00
Jakub Kicinski
a300597318 docs: netdev: add missing back ticks
I think double back ticks are more correct. Add where they are missing.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:39 +02:00
Jakub Kicinski
3eca381457 docs: netdev: make the testing requirement more stringent
These days we often ask for selftests so let's update our
testing requirements.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:39 +02:00
Jakub Kicinski
b8ba106378 docs: netdev: add a question about re-posting frequency
We have to tell people to stop reposting to often lately,
or not to repost while the discussion is ongoing.
Document this.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:39 +02:00
Jakub Kicinski
724c1a7443 docs: netdev: rephrase the 'should I update patchwork' question
Make the question shorter and adjust the start of the answer accordingly.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
8f785c1bb8 docs: netdev: rephrase the 'Under review' question
The semantics of "Under review" have shifted. Reword the question
about it a bit and focus it on the response time.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
5d84921ac7 docs: netdev: shorten the name and mention msgid for patch status
Cut down the length of the question so it renders better in docs.
Mention that Message-ID can be used to search patchwork.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
0e242e3fb7 docs: netdev: note that RFC postings are allowed any time
Document that RFCs are allowed during the merge window.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
2fd4c50dbf docs: netdev: turn the net-next closed into a Warning
Use the sphinx Warning box to make the net-next being closed
stand out more.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
c82d90b14f docs: netdev: move the patch marking section up
We want people to mark their patches with net and net-next in the subject.
Many miss doing that. Move the FAQ section which points that out up, and
place it after the section which enumerates the trees, that seems like
a pretty logical place for it. Since the two sections are together we
can remove a little bit (not too much) of the repetition.

v2: also remove the text for non-git setups, we want people to use git.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
30cddd3053 docs: netdev: minor reword
that -> those

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
50386f7526 docs: netdev: replace references to old archives
Most people use (or should use) lore at this point.
Replace the pointers to older archiving systems.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-31 10:49:38 +02:00
Jakub Kicinski
2cb7b4890d devlink: expose instance locking and add locked port registering
It should be familiar and beneficial to expose devlink instance
lock to the drivers. This way drivers can block devlink from
calling them during critical sections without breakneck locking.

Add port helpers, port splitting callbacks will be the first
target.

Use 'devl_' prefix for "explicitly locked" API. Initial RFC used
'__devlink' but that's too much typing.

devl_lock_is_held() is not defined without lockdep, which is
the same behavior as lockdep_is_held() itself.

Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16 12:56:31 -07:00
Eric Dumazet
65466904b0 tcp: adjust TSO packet sizes based on min_rtt
Back when tcp_tso_autosize() and TCP pacing were introduced,
our focus was really to reduce burst sizes for long distance
flows.

The simple heuristic of using sk_pacing_rate/1024 has worked
well, but can lead to too small packets for hosts in the same
rack/cluster, when thousands of flows compete for the bottleneck.

Neal Cardwell had the idea of making the TSO burst size
a function of both sk_pacing_rate and tcp_min_rtt()

Indeed, for local flows, sending bigger bursts is better
to reduce cpu costs, as occasional losses can be repaired
quite fast.

This patch is based on Neal Cardwell implementation
done more than two years ago.
bbr is adjusting max_pacing_rate based on measured bandwidth,
while cubic would over estimate max_pacing_rate.

/proc/sys/net/ipv4/tcp_tso_rtt_log can be used to tune or disable
this new feature, in logarithmic steps.

Tested:

100Gbit NIC, two hosts in the same rack, 4K MTU.
600 flows rate-limited to 20000000 bytes per second.

Before patch: (TSO sizes would be limited to 20000000/1024/4096 -> 4 segments per TSO)

~# echo 0 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
  96005

 Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':

         65,945.29 msec task-clock                #    2.845 CPUs utilized
         1,314,632      context-switches          # 19935.279 M/sec
             5,292      cpu-migrations            #   80.249 M/sec
           940,641      page-faults               # 14264.023 M/sec
   201,117,030,926      cycles                    # 3049769.216 GHz                   (83.45%)
    17,699,435,405      stalled-cycles-frontend   #    8.80% frontend cycles idle     (83.48%)
   136,584,015,071      stalled-cycles-backend    #   67.91% backend cycles idle      (83.44%)
    53,809,530,436      instructions              #    0.27  insn per cycle
                                                  #    2.54  stalled cycles per insn  (83.36%)
     9,062,315,523      branches                  # 137422329.563 M/sec               (83.22%)
       153,008,621      branch-misses             #    1.69% of all branches          (83.32%)

      23.182970846 seconds time elapsed

TcpInSegs                       15648792           0.0
TcpOutSegs                      58659110           0.0  # Average of 3.7 4K segments per TSO packet
TcpExtTCPDelivered              58654791           0.0
TcpExtTCPDeliveredCE            19                 0.0

After patch:

~# echo 9 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
  96046

 Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':

         48,982.58 msec task-clock                #    2.104 CPUs utilized
           186,014      context-switches          # 3797.599 M/sec
             3,109      cpu-migrations            #   63.472 M/sec
           941,180      page-faults               # 19214.814 M/sec
   153,459,763,868      cycles                    # 3132982.807 GHz                   (83.56%)
    12,069,861,356      stalled-cycles-frontend   #    7.87% frontend cycles idle     (83.32%)
   120,485,917,953      stalled-cycles-backend    #   78.51% backend cycles idle      (83.24%)
    36,803,672,106      instructions              #    0.24  insn per cycle
                                                  #    3.27  stalled cycles per insn  (83.18%)
     5,947,266,275      branches                  # 121417383.427 M/sec               (83.64%)
        87,984,616      branch-misses             #    1.48% of all branches          (83.43%)

      23.281200256 seconds time elapsed

TcpInSegs                       1434706            0.0
TcpOutSegs                      58883378           0.0  # Average of 41 4K segments per TSO packet
TcpExtTCPDelivered              58878971           0.0
TcpExtTCPDeliveredCE            9664               0.0

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220309015757.2532973-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09 20:05:44 -08:00
Sebastian Andrzej Siewior
21f95a88ea docs: networking: Use netif_rx().
Since commit
   baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04 12:02:19 +00:00
Dust Li
f9f52c3474 net/smc: fix document build WARNING from smc-sysctl.rst
Stephen reported the following warning messages from smc-sysctl.rst

Documentation/networking/smc-sysctl.rst:3: WARNING: Title overline
too short.
Documentation/networking/smc-sysctl.rst: WARNING: document isn't
included in any toctree

Fix the title overline and add smc-sysctl entry into
Documentation/networking/index.rst

Fixes: 12bbb0d163 ("net/smc: add sysctl for autocorking")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220303113527.62047-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03 21:24:34 -08:00
Joe Damato
a3dd98281b Documentation: update networking/page_pool.rst
Add the new stats API, kernel config parameter, and stats structure
information to the page_pool documentation.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03 09:55:28 +00:00
Dust Li
12bbb0d163 net/smc: add sysctl for autocorking
This add a new sysctl: net.smc.autocorking_size

We can dynamically change the behaviour of autocorking
by change the value of autocorking_size.
Setting to 0 disables autocorking in SMC

Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-01 14:25:12 +00:00
Vladimir Oltean
d27656d02d docs: net: dsa: sja1105: document limitations of tc-flower rule VLAN awareness
After change "net: dsa: tag_8021q: replace the SVL bridging with
VLAN-unaware IVL bridging", tag_8021q enforces two different pvids on a
port, depending on whether it is standalone or in a VLAN-unaware bridge.

Up until now, there was a single pvid, represented by
dsa_tag_8021q_rx_vid(), and that was used as the VLAN for VLAN-unaware
virtual link rules, regardless of whether the port was bridged or
standalone.

To keep VLAN-unaware virtual links working, we need to follow whether
the port is in a bridge or not, and update the VLAN ID from those rules.

In fact we can't fully do that. Depending on whether the switch is
VLAN-aware or not, we can accept Virtual Link rules with just the MAC
DA, or with a MAC DA and a VID. So we already deny changes to the VLAN
awareness of the switch. But the VLAN awareness may also change as a
result of joining or leaving a bridge.

One might say we could just allow the following: a port may leave a
VLAN-unaware bridge while it has VLAN-unaware VL (tc-flower) rules, and
the driver will update those with the new tag_8021q pvid for standalone
mode, but the driver won't accept joining a bridge at all while VL rules
were installed in standalone mode. This is sort of a compromise made
because leaving a bridge is an operation that cannot be vetoed.
But this sort of setup change is not fully supported, either: as
mentioned, VLAN filtering changes can also be triggered by leaving a
bridge, therefore, the existing veto we have in place for turning VLAN
filtering off with VLAN-aware VL rules active still isn't fully
effective.

I really don't know how to deal with this in a way that produces
predictable behavior for user space. Since at the moment, keeping this
feature fully functional on constellation changes (not changing the
tag_8021q port pvid when joining a bridge) is blocking progress for the
DSA FDB isolation, I'd rather document it as a (potentially temporary)
limitation and go on without it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-27 11:06:13 +00:00
Subbaraya Sundeep
1241e329ce ethtool: add support to set/get completion queue event size
Add support to set completion queue event size via ethtool -G
parameter and get it via ethtool -g parameter.

~ # ./ethtool -G eth0 cqe-size 512
~ # ./ethtool -g eth0
Ring parameters for eth0:
Pre-set maximums:
RX:             1048576
RX Mini:        n/a
RX Jumbo:       n/a
TX:             1048576
Current hardware settings:
RX:             256
RX Mini:        n/a
RX Jumbo:       n/a
TX:             4096
RX Buf Len:             2048
CQE Size:                128

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 20:33:05 -08:00
Hangbin Liu
129e3c1bab bonding: add new option ns_ip6_target
This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine the health of the link.

For other related options like the validation, we still use
arp_validate, and will change to ns_validate later.

Note: the sysfs configuration support was removed based on
https://lore.kernel.org/netdev/8863.1645071997@famine

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21 12:13:45 +00:00
Matt Johnston
63ed1aab3d mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control
This change adds a couple of new ioctls for mctp sockets:
SIOCMCTPALLOCTAG and SIOCMCTPDROPTAG.  These ioctls provide facilities
for explicit allocation / release of tags, overriding the automatic
allocate-on-send/release-on-reply and timeout behaviours. This allows
userspace more control over messages that may not fit a simple
request/response model.

In order to indicate a pre-allocated tag to the sendmsg() syscall, we
introduce a new flag to the struct sockaddr_mctp.smctp_tag value:
MCTP_TAG_PREALLOC.

Additional changes from Jeremy Kerr <jk@codeconstruct.com.au>.

Contains a fix that was:
Reported-by: kernel test robot <lkp@intel.com>

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09 12:00:11 +00:00
Jakub Kicinski
9690ae6042 ethtool: add header/data split indication
For applications running on a mix of platforms it's useful
to have a clear indication whether host's NIC supports the
geometry requirements of TCP zero-copy. TCP zero-copy Rx
requires data to be neatly placed into memory pages.
Most NICs can't do that.

This patch is adding GET support only, since the NICs
I work with either always have the feature enabled or
enable it whenever MTU is set to jumbo. In other words
I don't need SET. But adding set should be trivial.
(The only note on SET is that we will likely want
the setting to be "sticky" and use 0 / `unknown`
to reset it back to driver default.)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28 14:43:47 +00:00
Linus Torvalds
6f38be8f2c This isn't a hugely busy cycle for documentation, but a few significant
things still showed up:
 
  - A documentation section for ARC processors
  - Reworked and enhanced KUnit documentation
  - The ability to pick your own theme for HTML builds; if the default
    "Read the Docs" theme isn't ugly enough for you, you can now pick
    an uglier one.
  - More Chinese translation work
 
 Plus the usual assortment of fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmHcgvUPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YCkcH/0d/bDbjkwh/6fFleHJDic+jasuoAk4HTpKn
 G3dMvEHDzYm2uXJiCZTaxagUtP8S8BdZ1cMrThZ0zcCni30+awvCmq/puK2zo3G3
 urofj9FfjTjKBLOb8GFnLCITzKVeWlSojtSj6cLbd/bbMX4eCEliis0KexEBrKpF
 rmlY7qVr0WeBiW0Wg7xXjTd0H2dCO9O+5IQ/BzSPDJOzxyBWGLg0B/mXcm+BeOJ7
 MukRtR7e2QcAw6MIxUI4tc2yoeG8XssNbbIrmcya1xwsSiAtcxHv3V2qCrJqmAx1
 8mK1q4Mot9zGcOcBQWJoRwotRuS8wqH0jr+XgRbg12AwEZc66zg=
 =oPyM
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.17' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "This isn't a hugely busy cycle for documentation, but a few
  significant things still showed up:

   - A documentation section for ARC processors

   - Reworked and enhanced KUnit documentation

   - The ability to pick your own theme for HTML builds; if the default
     "Read the Docs" theme isn't ugly enough for you, you can now pick
     an uglier one.

   - More Chinese translation work

  Plus the usual assortment of fixes and cleanups"

* tag 'docs-5.17' of git://git.lwn.net/linux: (53 commits)
  scripts: sphinx-pre-install: Fix ctex support on Debian
  docs: discourage use of list tables
  docs: 5.Posting.rst: describe Fixes: and Link: tags
  Documentation: kgdb: Replace deprecated remotebaud
  docs: automarkup.py: Fix invalid HTML link output and broken URI fragments
  Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
  Documentation: kgdb: properly capitalize the MAGIC_SYSRQ config
  docs/zh_CN: Update and fix a couple of typos
  scripts: sphinx-pre-install: add required ctex dependency
  Documentation: KUnit: Restyled Frequently Asked Questions
  Documentation: KUnit: Restyle Test Style and Nomenclature page
  Documentation: KUnit: Rework writing page to focus on writing tests
  Documentation: kunit: Reorganize documentation related to running tests
  Documentation: KUnit: Added KUnit Architecture
  Documentation: KUnit: Rewrite getting started
  Documentation: KUnit: Rewrite main page
  docs/zh_CN: Add zh_CN/accounting/delay-accounting.rst
  Documentation/sphinx: fix typos of "its"
  docs/zh_CN: Add sched-domains translation
  doc: fs: remove bdev_try_to_free_page related doc
  ...
2022-01-11 10:00:04 -08:00
Dario Binacchi
bc3897f79f docs: networking: device drivers: can: add flexcan
Add initial documentation for Flexcan driver.

Link: https://lore.kernel.org/all/20220107193105.1699523-8-mkl@pengutronix.de
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08 21:22:58 +01:00
Dario Binacchi
32db1660ee docs: networking: device drivers: add can sub-folder
Add the container for CAN drivers documentation.

Link: https://lore.kernel.org/all/20220107193105.1699523-7-mkl@pengutronix.de
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-08 21:22:58 +01:00
Arthur Kiyanovski
273a2397fc net: ena: Update LLQ header length in ena documentation
LLQ entry length is 128 bytes. Therefore the maximum header in
the entry is calculated by:
tx_max_header_size =
LLQ_ENTRY_SIZE - DESCRIPTORS_NUM_BEFORE_HEADER * 16 =
128 - 2 * 16 = 96

This patch updates the documentation so that it states the correct
max header length.

Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07 19:25:50 -08:00
Saeed Mahameed
745a13061a Documentation: devlink: mlx5.rst: Fix htmldoc build warning
Fix the following build warning:

Documentation/networking/devlink/mlx5.rst:13: WARNING: Error parsing content block for the "list-table" directive:
+uniform two-level bullet list expected, but row 2 does not contain the same number of items as row 1 (2 vs 3).
...

Add the missing item in the first row.

Fixes: 0844fa5f7b ("net/mlx5: Let user configure io_eq_size param")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-01-06 16:22:55 -08:00
Jakub Kicinski
aec53e60e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
  commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
  commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
  commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
  https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/

net/smc/smc_wr.c
  commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
  commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
  bitmap_zero()/memset() is removed by the fix

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-30 12:12:12 -08:00
xu xin
be1c5b5322 Documentation: fix outdated interpretation of ip_no_pmtu_disc
The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.

See commit 28d35bcdd3 ("net: ipv4: don't let PMTU updates increase
route MTU")

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30 13:28:04 +00:00
Jakub Kicinski
8b3f913322 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
include/net/sock.h
  commit 8f905c0e73 ("inet: fully convert sk->sk_rx_dst to RCU rules")
  commit 43f51df417 ("net: move early demux fields close to sk_refcnt")
  https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23 16:09:58 -08:00
Shay Drory
8680a60fc1 net/mlx5: Let user configure max_macs generic param
Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.

For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
              cmode driverinit
$ devlink dev reload pci/0000:00:0b.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21 19:08:55 -08:00
Shay Drory
0ad598d0be devlink: Clarifies max_macs generic devlink param
The generic param max_macs documentation isn't clear.
Replace it with a more descriptive documentation

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21 19:08:55 -08:00
Shay Drory
57ca767820 net/mlx5: Let user configure event_eq_size param
Event EQ is an EQ which received the notification of almost all the
events generated by the NIC.
Currently, each event EQ is taking 512KB of memory. This size is not
needed in most use cases, and is critical with large scale. Hence,
allow user to configure the size of the event EQ.

For example to reduce event EQ size to 64, execute::
$ devlink dev param set pci/0000:00:0b.0 name event_eq_size value 64 \
              cmode driverinit
$ devlink dev reload pci/0000:00:0b.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21 19:08:55 -08:00
Shay Drory
0b5705ebc3 devlink: Add new "event_eq_size" generic device param
Add new device generic parameter to determine the size of the
asynchronous control events EQ.

For example, to reduce event EQ size to 64, execute:
$ devlink dev param set pci/0000:06:00.0 \
              name event_eq_size value 64 cmode driverinit
$ devlink dev reload pci/0000:06:00.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21 19:08:54 -08:00
Shay Drory
0844fa5f7b net/mlx5: Let user configure io_eq_size param
Currently, each I/O EQ is taking 128KB of memory. This size
is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the size of I/O EQs.

For example, to reduce I/O EQ size to 64, execute:
$ devlink dev param set pci/0000:00:0b.0 name io_eq_size value 64 \
              cmode driverinit
$ devlink dev reload pci/0000:00:0b.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21 19:08:54 -08:00
Shay Drory
47402385d0 devlink: Add new "io_eq_size" generic device param
Add new device generic parameter to determine the size of the
I/O completion EQs.

For example, to reduce I/O EQ size to 64, execute:
$ devlink dev param set pci/0000:06:00.0 \
              name io_eq_size value 64 cmode driverinit
$ devlink dev reload pci/0000:06:00.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21 19:08:54 -08:00
Fernando Fernandez Mancera
1c15b05bae bonding: fix ad_actor_system option setting to default
When 802.3ad bond mode is configured the ad_actor_system option is set to
"00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors'
system address it was failing with EINVAL.

An all-zeroes ethernet address is valid, only multicast addresses are not
valid values.

Fixes: 171a42c38c ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21 16:54:19 -08:00
Willem de Bruijn
a9725e1d39 docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
Tiny doc fix. The hardware transmit function was called skb_tstamp_tx
from its introduction in commit ac45f602ee ("net: infrastructure for
hardware time stamping") in the same series as this documentation.

Fixes: cb9eff0978 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220144608.2783526-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20 18:47:11 -08:00
Sean Anderson
662f11d55f docs: networking: dpaa2: Fix DPNI header
The DPNI object should get its own header, like the rest of the objects.

Fixes: 60b91319a3 ("staging: fsl-mc: Convert documentation to rst format")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20 11:46:42 +00:00
Jakub Kicinski
7cd2802d74 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16 16:13:19 -08:00
Robert Schlabbach
271225fd57 ixgbe: Document how to enable NBASE-T support
Commit a296d665ea ("ixgbe: Add ethtool support to enable 2.5 and 5.0
Gbps support") introduced suppression of the advertisement of NBASE-T
speeds by default, according to Todd Fujinaka to accommodate customers
with network switches which could not cope with advertised NBASE-T
speeds, as posted in the E1000-devel mailing list:

https://sourceforge.net/p/e1000/mailman/message/37106269/

However, the suppression was not documented at all, nor was how to
enable NBASE-T support.

Properly document the NBASE-T suppression and how to enable NBASE-T
support.

Fixes: a296d665ea ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15 11:09:29 -08:00
Jacob Keller
399e27dbbd ice: support immediate firmware activation via devlink reload
The ice hardware contains an embedded chip with firmware which can be
updated using devlink flash. The firmware which runs on this chip is
referred to as the Embedded Management Processor firmware (EMP
firmware).

Activating the new firmware image currently requires that the system be
rebooted. This is not ideal as rebooting the system can cause unwanted
downtime.

In practical terms, activating the firmware does not always require a
full system reboot. In many cases it is possible to activate the EMP
firmware immediately. There are a couple of different scenarios to
cover.

 * The EMP firmware itself can be reloaded by issuing a special update
   to the device called an Embedded Management Processor reset (EMP
   reset). This reset causes the device to reset and reload the EMP
   firmware.

 * PCI configuration changes are only reloaded after a cold PCIe reset.
   Unfortunately there is no generic way to trigger this for a PCIe
   device without a system reboot.

When performing a flash update, firmware is capable of responding with
some information about the specific update requirements.

The driver updates the flash by programming a secondary inactive bank
with the contents of the new image, and then issuing a command to
request to switch the active bank starting from the next load.

The response to the final command for updating the inactive NVM flash
bank includes an indication of the minimum reset required to fully
update the device. This can be one of the following:

 * A full power on is required
 * A cold PCIe reset is required
 * An EMP reset is required

The response to the command to switch flash banks includes an indication
of whether or not the firmware will allow an EMP reset request.

For most updates, an EMP reset is sufficient to load the new EMP
firmware without issues. In some cases, this reset is not sufficient
because the PCI configuration space has changed. When this could cause
incompatibility with the new EMP image, the firmware is capable of
rejecting the EMP reset request.

Add logic to ice_fw_update.c to handle the response data flash update
AdminQ commands.

For the reset level, issue a devlink status notification informing the
user of how to complete the update with a simple suggestion like
"Activate new firmware by rebooting the system".

Cache the status of whether or not firmware will restrict the EMP reset
for use in implementing devlink reload.

Implement support for devlink reload with the "fw_activate" flag. This
allows user space to request the firmware be activated immediately.

For the .reload_down handler, we will issue a request for the EMP reset
using the appropriate firmware AdminQ command. If we know that the
firmware will not allow an EMP reset, simply exit with a suitable
netlink extended ACK message indicating that the EMP reset is not
available.

For the .reload_up handler, simply wait until the driver has finished
resetting. Logic to handle processing of an EMP reset already exists in
the driver as part of its reset and rebuild flows.

Implement support for the devlink reload interface with the
"fw_activate" action. This allows userspace to request activation of
firmware without a reboot.

Note that support for indicating the required reset and EMP reset
restriction is not supported on old versions of firmware. The driver can
determine if the two features are supported by checking the device
capabilities report. I confirmed support has existed since at least
version 5.5.2 as reported by the 'fw.mgmt' version. Support to issue the
EMP reset request has existed in all version of the EMP firmware for the
ice hardware.

Check the device capabilities report to determine whether or not the
indications are reported by the running firmware. If the reset
requirement indication is not supported, always assume a full power on
is necessary. If the reset restriction capability is not supported,
always assume the EMP reset is available.

Users can verify if the EMP reset has activated the firmware by using
the devlink info report to check that the 'running' firmware version has
updated. For example a user might do the following:

 # Check current version
 $ devlink dev info

 # Update the device
 $ devlink dev flash pci/0000:af:00.0 file firmware.bin

 # Confirm stored version updated
 $ devlink dev info

 # Reload to activate new firmware
 $ devlink dev reload pci/0000:af:00.0 action fw_activate

 # Confirm running version updated
 $ devlink dev info

Finally, this change does *not* implement basic driver-only reload
support. I did look into trying to do this. However, it requires
significant refactor of how the ice driver probes and loads everything.
The ice driver probe and allocation flows were not designed with such
a reload in mind. Refactoring the flow to support this is beyond the
scope of this change.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15 08:40:38 -08:00
Jakub Kicinski
be3158290d Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:

====================
bpf-next 2021-12-10 v2

We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).

The main changes are:

1) Various samples fixes, from Alexander Lobakin.

2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.

3) A batch of new unified APIs for libbpf, logging improvements, version
   querying, etc. Also a batch of old deprecations for old APIs and various
   bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.

4) BPF documentation reorganization and improvements, from Christoph Hellwig
   and Dave Tucker.

5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
   libbpf, from Hengqi Chen.

6) Verifier log fixes, from Hou Tao.

7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.

8) Extend branch record capturing to all platforms that support it,
   from Kajol Jain.

9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.

10) bpftool doc-generating script improvements, from Quentin Monnet.

11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.

12) Deprecation warning fix for perf/bpf_counter, from Song Liu.

13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
    from Tiezhu Yang.

14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.

15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
    Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
    and others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
  libbpf: Add "bool skipped" to struct bpf_map
  libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
  bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
  selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
  selftests/bpf: Add test for libbpf's custom log_buf behavior
  selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
  libbpf: Deprecate bpf_object__load_xattr()
  libbpf: Add per-program log buffer setter and getter
  libbpf: Preserve kernel error code and remove kprobe prog type guessing
  libbpf: Improve logging around BPF program loading
  libbpf: Allow passing user log setting through bpf_object_open_opts
  libbpf: Allow passing preallocated log_buf when loading BTF into kernel
  libbpf: Add OPTS-based bpf_btf_load() API
  libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
  samples/bpf: Remove unneeded variable
  bpf: Remove redundant assignment to pointer t
  selftests/bpf: Fix a compilation warning
  perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
  samples: bpf: Fix 'unknown warning group' build warning on Clang
  samples: bpf: Fix xdp_sample_user.o linking with Clang
  ...
====================

Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10 15:56:13 -08:00
Jonathan Corbet
a7fb920b15 Linux 5.16-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmGtOFYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1hUH/1bmlOYsscJ7biqd
 VECr5HhTg6iRvwWUiOpU27fLuBeAM1ZdF0oLuCtzvbK2h8lfTclcHfueihK0GIvX
 ci8BvwpOYfUdDUWHglgvGXqICqYch3PiBVMFiRRRkzcpZdyCFCirAynLdOeusdTU
 72Fi2RBaIM+U/5UVKcTx0J9WJsvFcG97lnNX5nT3dUmuoSW4WmX+h4vIe8VYFVmd
 8q1gD17hPL+ThTKcZApn7IsArU1LNEGRg0tYItgMJo8AMTvsZjwR6yQgXeyuQ0Xk
 xp6pZwzABtnL9dfNJ95q1GhsJBX5T5XvAVjt2uR1ADbgh6TDApC1VBKICm1Nva7g
 uT6S0yE=
 =JNL8
 -----END PGP SIGNATURE-----

Merge tag 'v5.16-rc4' into docs-next

I have a couple of fixes for warnings introduced after -rc1; catch up to
-rc4 so that the fixes have something to fix.
2021-12-10 13:57:09 -07:00
Christoph Hellwig
88691e9e1e bpf, docs: Split general purpose eBPF documentation out of filter.rst
filter.rst starts out documenting the classic BPF and then spills into
introducing and documentating eBPF.  Move the eBPF documentation into
rwo new files under Documentation/bpf/ for the instruction set and
the verifier and link to the BPF documentation from filter.rst.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211119163215.971383-6-hch@lst.de
2021-11-30 10:52:11 -08:00
Christoph Hellwig
bc84e959e5 bpf, docs: Move handling of maps to Documentation/bpf/maps.rst
Move the general maps documentation into the maps.rst file from the
overall networking filter documentation and add a link instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211119163215.971383-5-hch@lst.de
2021-11-30 10:52:11 -08:00
Christoph Hellwig
06edc59c1f bpf, docs: Prune all references to "internal BPF"
The eBPF name has completely taken over from eBPF in general usage for
the actual eBPF representation, or BPF for any general in-kernel use.
Prune all remaining references to "internal BPF".

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211119163215.971383-4-hch@lst.de
2021-11-30 10:52:11 -08:00
Hangbin Liu
5944b5abd8 Bonding: add arp_missed_max option
Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.

Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-30 12:15:58 +00:00
Ahmed Zaki
c4c5509006 Doc: networking: Fix the title's Sphinx overline in rds.rst
A missing "=" caused the title and sections to not show up properly in
the htmldocs.

Signed-off-by: Ahmed Zaki <anzaki@gmail.com>
Link: https://lore.kernel.org/r/20211128171719.3286255-1-anzaki@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-11-29 15:18:21 -07:00
Jakub Kicinski
93d5404e89 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ipa/ipa_main.c
  8afc7e471a ("net: ipa: separate disabling setup from modem stop")
  76b5fbcd6b ("net: ipa: kill ipa_modem_init()")

Duplicated include, drop one.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26 13:45:19 -08:00
Jakub Kicinski
cbb91dcbfb ptp: fix filter names in the documentation
All the filter names are missing _PTP in them.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20211126031921.2466944-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26 11:19:19 -08:00
Shiraz Saleem
325e0d0aa6 devlink: Add 'enable_iwarp' generic device param
Add a new device generic parameter to enable and disable
iWARP functionality on a multi-protocol RDMA device.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-22 08:41:39 -08:00
Hao Chen
0b70c256eb ethtool: add support to set/get rx buf len via ethtool
Add support to set rx buf len via ethtool -G parameter and get
rx buf len via ethtool -g parameter.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22 12:31:48 +00:00
David S. Miller
d6821c5bc6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Add selftest for vrf+conntrack, from Florian Westphal.

2) Extend nfqueue selftest to cover nfqueue, also from Florian.

3) Remove duplicated include in nft_payload, from Wan Jiabing.

4) Several improvements to the nat port shadowing selftest,
   from Phil Sutter.

5) Fix filtering of reply tuple in ctnetlink, from Florent Fourcot.

6) Do not override error with -EINVAL in filter setup path, also
   from Florent.

7) Honor sysctl_expire_nodest_conn regardless conn_reuse_mode for
   reused connections, from yangxingwu.

8) Replace snprintf() by sysfs_emit() in xt_IDLETIMER as reported
   by Coccinelle, from Jing Yao.

9) Incorrect IPv6 tunnel match in flowtable offload, from Will
   Mortensen.

10) Switch port shadow selftest to use socat, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19 11:00:01 +00:00
Vasudev Kamath
738baea497 Documentation: networking: net_failover: Fix documentation
Update net_failover documentation with missing and incomplete
details to get a proper working setup.

Signed-off-by: Vasudev Kamath <vasudev@copyninja.info>
Reviewed-by: Krishna Kumar <krikku@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17 13:59:49 +00:00
Russell King (Oracle)
b9241f5413 net: document SMII and correct phylink's new validation mechanism
SMII has not been documented in the kernel, but information on this PHY
interface mode has been recently found. Document it, and correct the
recently introduced phylink handling for this interface mode.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1mmfVl-0075nP-14@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16 19:22:30 -08:00
Linus Torvalds
f54ca91fe6 Networking fixes for 5.16-rc1, including fixes from bpf, can
and netfilter.
 
 Current release - regressions:
 
  - bpf: do not reject when the stack read size is different
    from the tracked scalar size
 
  - net: fix premature exit from NAPI state polling in napi_disable()
 
  - riscv, bpf: fix RV32 broken build, and silence RV64 warning
 
 Current release - new code bugs:
 
  - net: fix possible NULL deref in sock_reserve_memory
 
  - amt: fix error return code in amt_init(); fix stopping the workqueue
 
  - ax88796c: use the correct ioctl callback
 
 Previous releases - always broken:
 
  - bpf: stop caching subprog index in the bpf_pseudo_func insn
 
  - security: fixups for the security hooks in sctp
 
  - nfc: add necessary privilege flags in netlink layer, limit operations
    to admin only
 
  - vsock: prevent unnecessary refcnt inc for non-blocking connect
 
  - net/smc: fix sk_refcnt underflow on link down and fallback
 
  - nfnetlink_queue: fix OOB when mac header was cleared
 
  - can: j1939: ignore invalid messages per standard
 
  - bpf, sockmap:
    - fix race in ingress receive verdict with redirect to self
    - fix incorrect sk_skb data_end access when src_reg = dst_reg
    - strparser, and tls are reusing qdisc_skb_cb and colliding
 
  - ethtool: fix ethtool msg len calculation for pause stats
 
  - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries
    to access an unregistering real_dev
 
  - udp6: make encap_rcv() bump the v6 not v4 stats
 
  - drv: prestera: add explicit padding to fix m68k build
 
  - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
 
  - drv: mvpp2: fix wrong SerDes reconfiguration order
 
 Misc & small latecomers:
 
  - ipvs: auto-load ipvs on genl access
 
  - mctp: sanity check the struct sockaddr_mctp padding fields
 
  - libfs: support RENAME_EXCHANGE in simple_rename()
 
  - avoid double accounting for pure zerocopy skbs
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmGNQdwACgkQMUZtbf5S
 IrsiMQ//f66lTJ8PJ5Qj70hX9dC897olx7uGHB9eiKoyOcJI459hFlfXwRU2T4Tf
 fPNwPNUQ9Mynw9tX/jWEi+7zd6r6TSHGXK49U9/rIbQ95QjKY4LHowIE63x+vPl2
 5Cpf+80zXC3DUX1fijgyG1ujnU3kBaqopTxDLmlsHw2PGkwT5Ox1DUwkhc370eEL
 xlpq3PYGWA8/AQNyhSVBkG/UmoLaq0jYNP5yVcOj4jGjgcgLe1SLrqczENr35QHZ
 cRkuBsFBMBZF7wSX2f9qQIB/+b1pcLlD9IO+K3S7Ruq+rUd7qfL/tmwNxEh0axYK
 AyIun1Bxcy7QJGjtpGAz+Ku7jS9T3HxzyxhqilQo3co8jAW0WJ1YwHl+XPgQXyjV
 DLG6Vxt4syiwsoSXGn8MQugs4nlBT+0qWl8YamIR+o7KkAYPc2QWkXlzEDfNeIW8
 JNCZA3sy7VGi1ytorZGx16sQsEWnyRG9a6/WV20Dr+HVs1SKPcFzIfG6mVngR07T
 mQMHnbAF6Z5d8VTcPQfMxd7UH48s1bHtk5lcSTa3j0Cw+GkA6ytTmjPdJ1qRcdkH
 dl9jAfADe4O6frG+9XH7FEFqhmkghVI7bOCA4ZOhClVaIcDGgEZc2y7sY9/oZ7P4
 KXBD2R5X1caCUM0UtzwL7/8ddOtPtHIrFnhY+7+I6ijt9qmI0BY=
 =Ttgq
 -----END PGP SIGNATURE-----

Merge tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and netfilter.

  Current release - regressions:

   - bpf: do not reject when the stack read size is different from the
     tracked scalar size

   - net: fix premature exit from NAPI state polling in napi_disable()

   - riscv, bpf: fix RV32 broken build, and silence RV64 warning

  Current release - new code bugs:

   - net: fix possible NULL deref in sock_reserve_memory

   - amt: fix error return code in amt_init(); fix stopping the
     workqueue

   - ax88796c: use the correct ioctl callback

  Previous releases - always broken:

   - bpf: stop caching subprog index in the bpf_pseudo_func insn

   - security: fixups for the security hooks in sctp

   - nfc: add necessary privilege flags in netlink layer, limit
     operations to admin only

   - vsock: prevent unnecessary refcnt inc for non-blocking connect

   - net/smc: fix sk_refcnt underflow on link down and fallback

   - nfnetlink_queue: fix OOB when mac header was cleared

   - can: j1939: ignore invalid messages per standard

   - bpf, sockmap:
      - fix race in ingress receive verdict with redirect to self
      - fix incorrect sk_skb data_end access when src_reg = dst_reg
      - strparser, and tls are reusing qdisc_skb_cb and colliding

   - ethtool: fix ethtool msg len calculation for pause stats

   - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to
     access an unregistering real_dev

   - udp6: make encap_rcv() bump the v6 not v4 stats

   - drv: prestera: add explicit padding to fix m68k build

   - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge

   - drv: mvpp2: fix wrong SerDes reconfiguration order

  Misc & small latecomers:

   - ipvs: auto-load ipvs on genl access

   - mctp: sanity check the struct sockaddr_mctp padding fields

   - libfs: support RENAME_EXCHANGE in simple_rename()

   - avoid double accounting for pure zerocopy skbs"

* tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits)
  selftests/net: udpgso_bench_rx: fix port argument
  net: wwan: iosm: fix compilation warning
  cxgb4: fix eeprom len when diagnostics not implemented
  net: fix premature exit from NAPI state polling in napi_disable()
  net/smc: fix sk_refcnt underflow on linkdown and fallback
  net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
  gve: fix unmatched u64_stats_update_end()
  net: ethernet: lantiq_etop: Fix compilation error
  selftests: forwarding: Fix packet matching in mirroring selftests
  vsock: prevent unnecessary refcnt inc for nonblocking connect
  net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
  net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
  net: stmmac: allow a tc-taprio base-time of zero
  selftests: net: test_vxlan_under_vrf: fix HV connectivity test
  net: hns3: allow configure ETS bandwidth of all TCs
  net: hns3: remove check VF uc mac exist when set by PF
  net: hns3: fix some mac statistics is always 0 in device version V2
  net: hns3: fix kernel crash when unload VF while it is being reset
  net: hns3: sync rx ring head in echo common pull
  net: hns3: fix pfc packet number incorrect after querying pfc parameters
  ...
2021-11-11 09:49:36 -08:00
yangxingwu
c95c07836f netfilter: ipvs: Fix reuse connection if RS weight is 0
We are changing expire_nodest_conn to work even for reused connections when
conn_reuse_mode=0, just as what was done with commit dc7b3eb900 ("ipvs:
Fix reuse connection if real server is dead").

For controlled and persistent connections, the new connection will get the
needed real server depending on the rules in ip_vs_check_template().

Fixes: d752c36457 ("ipvs: allow rescheduling of new connections when port reuse is detected")
Co-developed-by: Chuanqi Liu <legend050709@qq.com>
Signed-off-by: Chuanqi Liu <legend050709@qq.com>
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-11-08 11:42:47 +01:00
Menglong Dong
69dfccbc11 net: udp: correct the document for udp_mem
udp_mem is a vector of 3 INTEGERs, which is used to limit the number of
pages allowed for queueing by all UDP sockets.

However, sk_has_memory_pressure() in __sk_mem_raise_allocated() always
return false for udp, as memory pressure is not supported by udp, which
means that __sk_mem_raise_allocated() will fail once pages allocated
for udp socket exceeds udp_mem[0].

Therefor, udp_mem[0] is the only one that limit the number of pages.
However, the document of udp_mem just express that udp_mem[2] is the
limitation. So, just fix it.

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05 10:42:46 +00:00
Linus Torvalds
624ad333d4 This is a relatively unexciting cycle for documentation.
- Some small scripts/kerneldoc fixes
 
  - More Chinese translation work, but at a much reduced rate.
 
  - The tip-tree maintainer's handbook
 
 ...plus the usual array of build fixes, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmGBqbYPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YzMoH+wQwUbILvf4FB9h6l0qhbPnvcLMJtDiuIGSu
 Ivfc1t+Vh7/waehaYfn9erCNps6oE13Arsy0DDFZcr6vbjXFO5clFoh5jvSJsk+G
 zTXzZNB99SoJcZw9r8F7aJDbQNJfSXoyTTOg1mSeXNo+nkBFTSWO7QwCx5M2obaT
 76+r8HQpnEYmrGePsOXriV4aOP+yJxuGgkPb+VPlPtQhA7v6dzo5hmoh5tPIzCLd
 Fz8ek4aAm9sPEtu1UUoA+7MALZHTFwPv6aSAuyVeNfF/UBL6M4iAwusQyLdPFfoj
 JPO7f+1h6a8jKTfTWGjPI3o33DtU/8nc6DgnuBaXBTKW8Dl5Exk=
 =q37Q
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.16' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "This is a relatively unexciting cycle for documentation.

   - Some small scripts/kerneldoc fixes

   - More Chinese translation work, but at a much reduced rate.

   - The tip-tree maintainer's handbook

  ...plus the usual array of build fixes, typo fixes, etc"

* tag 'docs-5.16' of git://git.lwn.net/linux: (53 commits)
  kernel-doc: support DECLARE_PHY_INTERFACE_MASK()
  docs/zh_CN: add core-api xarray translation
  docs/zh_CN: add core-api assoc_array translation
  speakup: Fix typo in documentation "boo" -> "boot"
  docs: submitting-patches: make section about the Link: tag more explicit
  docs: deprecated.rst: Clarify open-coded arithmetic with literals
  scripts: documentation-file-ref-check: fix bpf selftests path
  scripts: documentation-file-ref-check: ignore hidden files
  coding-style.rst: trivial: fix location of driver model macros
  docs: f2fs: fix text alignment
  docs/zh_CN add PCI pci.rst translation
  docs/zh_CN add PCI index.rst translation
  docs: translations: zh_CN: memory-hotplug.rst: fix a typo
  docs: translations: zn_CN: irq-affinity.rst: add a missing extension
  block: add documentation for inflight
  scripts: kernel-doc: Ignore __alloc_size() attribute
  docs: pdfdocs: Adjust \headheight for fancyhdr
  docs: UML: user_mode_linux_howto_v2 edits
  docs: use the lore redirector everywhere
  docs: proc.rst: mountinfo: align columns
  ...
2021-11-02 22:11:39 -07:00
James Prestwood
18ac597af2 net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
In most situations the neighbor discovery cache should be cleared on a
NOCARRIER event which is currently done unconditionally. But for wireless
roams the neighbor discovery cache can and should remain intact since
the underlying network has not changed.

This patch introduces a sysctl option ndisc_evict_nocarrier which can
be disabled by a wireless supplicant during a roam. This allows packets
to be sent after a roam immediately without having to wait for
neighbor discovery.

A user reported roughly a 1 second delay after a roam before packets
could be sent out (note, on IPv4). This delay was due to the ARP
cache being cleared. During testing of this same scenario using IPv6
no delay was noticed, but regardless there is no reason to clear
the ndisc cache for wireless roams.

Signed-off-by: James Prestwood <prestwoj@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01 19:57:14 -07:00
James Prestwood
fcdb44d08a net: arp: introduce arp_evict_nocarrier sysctl parameter
This change introduces a new sysctl parameter, arp_evict_nocarrier.
When set (default) the ARP cache will be cleared on a NOCARRIER event.
This new option has been defaulted to '1' which maintains existing
behavior.

Clearing the ARP cache on NOCARRIER is relatively new, introduced by:

commit 859bd2ef1f
Author: David Ahern <dsahern@gmail.com>
Date:   Thu Oct 11 20:33:49 2018 -0700

    net: Evict neighbor entries on carrier down

The reason for this changes is to prevent the ARP cache from being
cleared when a wireless device roams. Specifically for wireless roams
the ARP cache should not be cleared because the underlying network has not
changed. Clearing the ARP cache in this case can introduce significant
delays sending out packets after a roam.

A user reported such a situation here:

https://lore.kernel.org/linux-wireless/CACsRnHWa47zpx3D1oDq9JYnZWniS8yBwW1h0WAVZ6vrbwL_S0w@mail.gmail.com/

After some investigation it was found that the kernel was holding onto
packets until ARP finished which resulted in this 1 second delay. It
was also found that the first ARP who-has was never responded to,
which is actually what caues the delay. This change is more or less
working around this behavior, but again, there is no reason to clear
the cache on a roam anyways.

As for the unanswered who-has, we know the packet made it OTA since
it was seen while monitoring. Why it never received a response is
unknown. In any case, since this is a problem on the AP side of things
all that can be done is to work around it until it is solved.

Some background on testing/reproducing the packet delay:

Hardware:
 - 2 access points configured for Fast BSS Transition (Though I don't
   see why regular reassociation wouldn't have the same behavior)
 - Wireless station running IWD as supplicant
 - A device on network able to respond to pings (I used one of the APs)

Procedure:
 - Connect to first AP
 - Ping once to establish an ARP entry
 - Start a tcpdump
 - Roam to second AP
 - Wait for operstate UP event, and note the timestamp
 - Start pinging

Results:

Below is the tcpdump after UP. It was recorded the interface went UP at
10:42:01.432875.

10:42:01.461871 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.497976 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.507162 ARP, Reply 192.168.254.1 is-at ac:86:74:55:b0:20, length 46
10:42:02.507185 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 1, length 64
10:42:02.507205 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 2, length 64
10:42:02.507212 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 3, length 64
10:42:02.507219 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 4, length 64
10:42:02.507225 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 5, length 64
10:42:02.507232 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 6, length 64
10:42:02.515373 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 1, length 64
10:42:02.521399 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 2, length 64
10:42:02.521612 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 3, length 64
10:42:02.521941 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 4, length 64
10:42:02.522419 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 5, length 64
10:42:02.523085 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 6, length 64

You can see the first ARP who-has went out very quickly after UP, but
was never responded to. Nearly a second later the kernel retries and
gets a response. Only then do the ping packets go out. If an ARP entry
is manually added prior to UP (after the cache is cleared) it is seen
that the first ping is never responded to, so its not only an issue with
ARP but with data packets in general.

As mentioned prior, the wireless interface was also monitored to verify
the ping/ARP packet made it OTA which was observed to be true.

Signed-off-by: James Prestwood <prestwoj@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01 19:57:14 -07:00
Michael Chan
eff441f3b5 bnxt_en: Update bnxt.rst devlink documentation
Add 'enable_remote_dev_reset' documentation to bnxt.rst.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29 12:13:05 +01:00
Subbaraya Sundeep
442e796f0a devlink: add documentation for octeontx2 driver
Add a file to document devlink support for octeontx2
driver. Driver-specific parameters implemented by
AF, PF and VF drivers are documented.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28 14:35:34 +01:00
Jakub Kicinski
6b3671746a net/mlx5: remove the recent devlink params
revert commit 46ae40b94d ("net/mlx5: Let user configure io_eq_size param")
revert commit a6cb08daa3 ("net/mlx5: Let user configure event_eq_size param")
revert commit 5546040619 ("net/mlx5: Let user configure max_macs param")

The EQE parameters are applicable to more drivers, they should
be configured via standard API, probably ethtool. Example of
another driver needing something similar:

https://lore.kernel.org/all/1633454136-14679-3-git-send-email-sbhatta@marvell.com/

The last param for "max_macs" is probably fine but the documentation
is severely lacking. The meaning and implications for changing the
param need to be stated.

Link: https://lore.kernel.org/r/20211026152939.3125950-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26 10:18:32 -07:00
Parav Pandit
d67ab0a8c1 net/mlx5: SF_DEV Add SF device trace points
Add SF device add and delete specific trace points.

echo mlx5:mlx5_sf_dev_add >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_dev_del >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_vhca_event >> /sys/kernel/debug/tracing/set_event

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25 13:51:21 -07:00
Parav Pandit
b3ccada68b net/mlx5: SF, Add SF trace points
Add support for trace events for SFs to improve debugging.
This covers
(a) port add and free trace points
(b) device level trace points
(c) SF hardware context add, free trace points.
(d) SF function activate/deacticate and state trace points

SF events examples:
echo mlx5:mlx5_sf_add >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_alloc >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_hwc_deferred_free >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_update_state >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_activate >> /sys/kernel/debug/tracing/set_event
echo mlx5:mlx5_sf_deactivate >> /sys/kernel/debug/tracing/set_event

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25 13:51:21 -07:00
Shay Drory
5546040619 net/mlx5: Let user configure max_macs param
Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.

For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
              cmode driverinit
$ devlink dev reload pci/0000:00:0b.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25 13:51:21 -07:00
Shay Drory
a6cb08daa3 net/mlx5: Let user configure event_eq_size param
Event EQ is an EQ which received the notification of almost all the
events generated by the NIC.
Currently, each event EQ is taking 512KB of memory. This size is not
needed in most use cases, and is critical with large scale. Hence,
allow user to configure the size of the event EQ.

For example to reduce event EQ size to 64, execute::
$ devlink resource set pci/0000:00:0b.0 path /event_eq_size/ size 64
$ devlink dev reload pci/0000:00:0b.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25 13:51:20 -07:00
Shay Drory
46ae40b94d net/mlx5: Let user configure io_eq_size param
Currently, each I/O EQ is taking 128KB of memory. This size
is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the size of I/O EQs.

For example, to reduce I/O EQ size to 64, execute:
$ devlink resource set pci/0000:00:0b.0 path /io_eq_size/ size 64
$ devlink dev reload pci/0000:00:0b.0

Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25 13:51:20 -07:00
Aya Levin
b87ef75cb5 net/mlx5: Print health buffer by log level
Add log macro which gets log level as a parameter. Use the severity
read from the health buffer and the new log macro to log the health buffer
with severity as log level.  Prior to this patch, health buffer was
printed in error log level regardless of its severity. Now the user may
filter dmesg (--level) or change kernel log level to focus on different
severity levels of firmware errors.

Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25 13:51:19 -07:00
David S. Miller
bdfa75ad70 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Lots of simnple overlapping additions.

With a build fix from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22 11:41:16 +01:00
Jeremy Kerr
b416beb25d mctp: unify sockaddr_mctp types
Use the more precise __kernel_sa_family_t for smctp_family, to match
struct sockaddr.

Also, use an unsigned int for the network member; negative networks
don't make much sense. We're already using unsigned for mctp_dev and
mctp_skb_cb, but need to change mctp_sock to suit.

Fixes: 60fc639816 ("mctp: Add sockaddr_mctp to uapi")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 13:47:09 +01:00
Brett Creeley
b726ddf984 ice: Print the api_patch as part of the fw.mgmt.api
Currently when a user uses "devlink dev info", the fw.mgmt.api will be
the major.minor numbers as shown below:

devlink dev info pci/0000:3b:00.0
pci/0000:3b:00.0:
  driver ice
  serial_number 00-01-00-ff-ff-00-00-00
  versions:
      fixed:
        board.id K91258-000
      running:
        fw.mgmt 6.1.2
        fw.mgmt.api 1.7 <--- No patch number included
        fw.mgmt.build 0xd75e7d06
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.app.name ICE OS Default Package
        fw.app 1.3.27.0
        fw.app.bundle_id 0xc0000001
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110
      stored:
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110

There are many features in the driver that depend on the major, minor,
and patch version of the FW. Without the patch number in the output for
fw.mgmt.api debugging issues related to the FW API version is difficult.
Also, using major.minor.patch aligns with the existing firmware version
which uses a 3 digit value.

Fix this by making the fw.mgmt.api print the major.minor.patch
versions. Shown below is the result:

devlink dev info pci/0000:3b:00.0
pci/0000:3b:00.0:
  driver ice
  serial_number 00-01-00-ff-ff-00-00-00
  versions:
      fixed:
        board.id K91258-000
      running:
        fw.mgmt 6.1.2
        fw.mgmt.api 1.7.9 <--- patch number included
        fw.mgmt.build 0xd75e7d06
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.app.name ICE OS Default Package
        fw.app 1.3.27.0
        fw.app.bundle_id 0xc0000001
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110
      stored:
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110

Fixes: ff2e5c700e ("ice: add basic handler for devlink .info_get")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14 10:14:46 -07:00
Thorsten Leemhuis
a9d85efb25 docs: use the lore redirector everywhere
Change all links from using the lkml redirector to the lore redirector,
as the kernel.org admin recently indicated: we shouldn't be using
lkml.kernel.org anymore because the domain can create confusion, as it
indicates it is only valid for messages sent to the LKML; the convention
has been to use https://lore.kernel.org/r/msgid for this reason.

In this process also change three links from using http to https.

Link: https://lore.kernel.org/r/20211006170025.qw3glxvocczfuhar@meerkat.local
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Hu Haowen <src.res@email.cn>
CC: Alex Shi <alexs@kernel.org>
CC: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/5bb55bac6ba10fafab19bf2b21572dd0e2f8cea2.1633593385.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-10-12 13:58:19 -06:00
Dust Li
2232642ec3 ipvs: add sysctl_run_estimation to support disable estimation
estimation_timer will iterate the est_list to do estimation
for each ipvs stats. When there are lots of services, the
list can be very large.
We found that estimation_timer() run for more then 200ms on a
machine with 104 CPU and 50K services.

yunhong-cgl jiang report the same phenomenon before:
https://www.spinics.net/lists/lvs-devel/msg05426.html

In some cases(for example a large K8S cluster with many ipvs services),
ipvs estimation may not be needed. So adding a sysctl blob to allow
users to disable this completely.

Default is: 1 (enable)

Cc: yunhong-cgl jiang <xintian1976@gmail.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-10-07 19:52:58 +02:00
Ido Schimmel
3dfb511260 ethtool: Add transceiver module extended state
Add an extended state and sub-state to describe link issues related to
transceiver modules.

The 'ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY' extended sub-state
tells user space that port is unable to gain a carrier because the CMIS
Module State Machine did not reach the ModuleReady (Fully Operational)
state. For example, if the module is stuck at ModuleLowPwr or
ModuleFault state. In case of the latter, user space can read the fault
reason from the module's EEPROM and potentially reset it.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06 17:47:50 -07:00
Ido Schimmel
353407d917 ethtool: Add ability to control transceiver modules' power mode
Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and
'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver
modules parameters and retrieve their status.

The first parameter to control is the power mode of the module. It is
only relevant for paged memory modules, as flat memory modules always
operate in low power mode.

When a paged memory module is in low power mode, its power consumption
is reduced to the minimum, the management interface towards the host is
available and the data path is deactivated.

User space can choose to put modules that are not currently in use in
low power mode and transition them to high power mode before putting the
associated ports administratively up. This is useful for user space that
favors reduced power consumption and lower temperatures over reduced
link up times. In QSFP-DD modules the transition from low power mode to
high power mode can take a few seconds and this transition is only
expected to get longer with future / more complex modules.

User space can control the power mode of the module via the power mode
policy attribute ('ETHTOOL_A_MODULE_POWER_MODE_POLICY'). Possible
values:

* high: Module is always in high power mode.

* auto: Module is transitioned by the host to high power mode when the
  first port using it is put administratively up and to low power mode
  when the last port using it is put administratively down.

The operational power mode of the module is available to user space via
the 'ETHTOOL_A_MODULE_POWER_MODE' attribute. The attribute is not
reported to user space when a module is not plugged-in.

The user API is designed to be generic enough so that it could be used
for modules with different memory maps (e.g., SFF-8636, CMIS).

The only implementation of the device driver API in this series is for a
MAC driver (mlxsw) where the module is controlled by the device's
firmware, but it is designed to be generic enough so that it could also
be used by implementations where the module is controlled by the CPU.

CMIS testing
============

 # ethtool -m swp11
 Identifier                                : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
 ...
 Module State                              : 0x03 (ModuleReady)
 LowPwrAllowRequestHW                      : Off
 LowPwrRequestSW                           : Off

The module is not in low power mode, as it is not forced by hardware
(LowPwrAllowRequestHW is off) or by software (LowPwrRequestSW is off).

The power mode can be queried from the kernel. In case
LowPwrAllowRequestHW was on, the kernel would need to take into account
the state of the LowPwrRequestHW signal, which is not visible to user
space.

 $ ethtool --show-module swp11
 Module parameters for swp11:
 power-mode-policy high
 power-mode high

Change the power mode policy to 'auto':

 # ethtool --set-module swp11 power-mode-policy auto

Query the power mode again:

 $ ethtool --show-module swp11
 Module parameters for swp11:
 power-mode-policy auto
 power-mode low

Verify with the data read from the EEPROM:

 # ethtool -m swp11
 Identifier                                : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
 ...
 Module State                              : 0x01 (ModuleLowPwr)
 LowPwrAllowRequestHW                      : Off
 LowPwrRequestSW                           : On

Put the associated port administratively up which will instruct the host
to transition the module to high power mode:

 # ip link set dev swp11 up

Query the power mode again:

 $ ethtool --show-module swp11
 Module parameters for swp11:
 power-mode-policy auto
 power-mode high

Verify with the data read from the EEPROM:

 # ethtool -m swp11
 Identifier                                : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
 ...
 Module State                              : 0x03 (ModuleReady)
 LowPwrAllowRequestHW                      : Off
 LowPwrRequestSW                           : Off

Put the associated port administratively down which will instruct the
host to transition the module to low power mode:

 # ip link set dev swp11 down

Query the power mode again:

 $ ethtool --show-module swp11
 Module parameters for swp11:
 power-mode-policy auto
 power-mode low

Verify with the data read from the EEPROM:

 # ethtool -m swp11
 Identifier                                : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
 ...
 Module State                              : 0x01 (ModuleLowPwr)
 LowPwrAllowRequestHW                      : Off
 LowPwrRequestSW                           : On

SFF-8636 testing
================

 # ethtool -m swp13
 Identifier                                : 0x11 (QSFP28)
 ...
 Extended identifier description           : 5.0W max. Power consumption,  High Power Class (> 3.5 W) enabled
 Power set                                 : Off
 Power override                            : On
 ...
 Transmit avg optical power (Channel 1)    : 0.7733 mW / -1.12 dBm
 Transmit avg optical power (Channel 2)    : 0.7649 mW / -1.16 dBm
 Transmit avg optical power (Channel 3)    : 0.7790 mW / -1.08 dBm
 Transmit avg optical power (Channel 4)    : 0.7837 mW / -1.06 dBm
 Rcvr signal avg optical power(Channel 1)  : 0.9302 mW / -0.31 dBm
 Rcvr signal avg optical power(Channel 2)  : 0.9079 mW / -0.42 dBm
 Rcvr signal avg optical power(Channel 3)  : 0.8993 mW / -0.46 dBm
 Rcvr signal avg optical power(Channel 4)  : 0.8778 mW / -0.57 dBm

The module is not in low power mode, as it is not forced by hardware
(Power override is on) or by software (Power set is off).

The power mode can be queried from the kernel. In case Power override
was off, the kernel would need to take into account the state of the
LPMode signal, which is not visible to user space.

 $ ethtool --show-module swp13
 Module parameters for swp13:
 power-mode-policy high
 power-mode high

Change the power mode policy to 'auto':

 # ethtool --set-module swp13 power-mode-policy auto

Query the power mode again:

 $ ethtool --show-module swp13
 Module parameters for swp13:
 power-mode-policy auto
 power-mode low

Verify with the data read from the EEPROM:

 # ethtool -m swp13
 Identifier                                : 0x11 (QSFP28)
 Extended identifier description           : 5.0W max. Power consumption,  High Power Class (> 3.5 W) not enabled
 Power set                                 : On
 Power override                            : On
 ...
 Transmit avg optical power (Channel 1)    : 0.0000 mW / -inf dBm
 Transmit avg optical power (Channel 2)    : 0.0000 mW / -inf dBm
 Transmit avg optical power (Channel 3)    : 0.0000 mW / -inf dBm
 Transmit avg optical power (Channel 4)    : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 1)  : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 2)  : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 3)  : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 4)  : 0.0000 mW / -inf dBm

Put the associated port administratively up which will instruct the host
to transition the module to high power mode:

 # ip link set dev swp13 up

Query the power mode again:

 $ ethtool --show-module swp13
 Module parameters for swp13:
 power-mode-policy auto
 power-mode high

Verify with the data read from the EEPROM:

 # ethtool -m swp13
 Identifier                                : 0x11 (QSFP28)
 ...
 Extended identifier description           : 5.0W max. Power consumption,  High Power Class (> 3.5 W) enabled
 Power set                                 : Off
 Power override                            : On
 ...
 Transmit avg optical power (Channel 1)    : 0.7934 mW / -1.01 dBm
 Transmit avg optical power (Channel 2)    : 0.7859 mW / -1.05 dBm
 Transmit avg optical power (Channel 3)    : 0.7885 mW / -1.03 dBm
 Transmit avg optical power (Channel 4)    : 0.7985 mW / -0.98 dBm
 Rcvr signal avg optical power(Channel 1)  : 0.9325 mW / -0.30 dBm
 Rcvr signal avg optical power(Channel 2)  : 0.9034 mW / -0.44 dBm
 Rcvr signal avg optical power(Channel 3)  : 0.9086 mW / -0.42 dBm
 Rcvr signal avg optical power(Channel 4)  : 0.8885 mW / -0.51 dBm

Put the associated port administratively down which will instruct the
host to transition the module to low power mode:

 # ip link set dev swp13 down

Query the power mode again:

 $ ethtool --show-module swp13
 Module parameters for swp13:
 power-mode-policy auto
 power-mode low

Verify with the data read from the EEPROM:

 # ethtool -m swp13
 Identifier                                : 0x11 (QSFP28)
 ...
 Extended identifier description           : 5.0W max. Power consumption,  High Power Class (> 3.5 W) not enabled
 Power set                                 : On
 Power override                            : On
 ...
 Transmit avg optical power (Channel 1)    : 0.0000 mW / -inf dBm
 Transmit avg optical power (Channel 2)    : 0.0000 mW / -inf dBm
 Transmit avg optical power (Channel 3)    : 0.0000 mW / -inf dBm
 Transmit avg optical power (Channel 4)    : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 1)  : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 2)  : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 3)  : 0.0000 mW / -inf dBm
 Rcvr signal avg optical power(Channel 4)  : 0.0000 mW / -inf dBm

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06 17:47:49 -07:00
M Chetan Kumar
b8aa16541d net: wwan: iosm: correct devlink extra params
1. Removed driver specific extra params like download_region,
   address & region_count. The required information is passed
   as part of flash API.
2. IOSM Devlink documentation updated to reflect the same.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02 16:05:20 +01:00
Jacob Keller
a70e3f024d devlink: report maximum number of snapshots with regions
Each region has an independently configurable number of maximum
snapshots. This information is not reported to userspace, making it not
very discoverable. Fix this by adding a new
DEVLINK_ATTR_REGION_MAX_SNAPSHOST attribute which is used to report this
maximum.

Ex:

  $devlink region
  pci/0000:af:00.0/nvm-flash: size 10485760 snapshot [] max 1
  pci/0000:af:00.0/device-caps: size 4096 snapshot [] max 10
  pci/0000:af:00.1/nvm-flash: size 10485760 snapshot [] max 1
  pci/0000:af:00.1/device-caps: size 4096 snapshot [] max 10

This information enables users to understand why a new region command
may fail due to having too many existing snapshots.

Reported-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01 14:28:55 +01:00
Jeremy Kerr
f4d41c5913 doc/mctp: Add a little detail about kernel internals
Describe common flows and refcounting behaviour.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29 11:00:12 +01:00
Jakub Kicinski
2fcd14d0f7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/mptcp/protocol.c
  977d293e23 ("mptcp: ensure tx skbs always have the MPTCP ext")
  efe686ffce ("mptcp: ensure tx skbs always have the MPTCP ext")

same patch merged in both trees, keep net-next.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-23 11:19:49 -07:00
Eric Dumazet
d8b81175e4 tcp: remove sk_{tr}x_skb_cache
This reverts the following patches :

- commit 2e05fcae83 ("tcp: fix compile error if !CONFIG_SYSCTL")
- commit 4f661542a4 ("tcp: fix zerocopy and notsent_lowat issues")
- commit 472c2e07ee ("tcp: add one skb cache for tx")
- commit 8b27dae5a2 ("tcp: add one skb cache for rx")

Having a cache of one skb (in each direction) per TCP socket is fragile,
since it can cause a significant increase of memory needs,
and not good enough for high speed flows anyway where more than one skb
is needed.

We want instead to add a generic infrastructure, with more flexible
per-cpu caches, for alien NUMA nodes.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23 12:50:26 +01:00
Masanari Iida
3e95cfa24e Doc: networking: Fox a typo in ice.rst
This patch fixes a spelling typo in ice.rst

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-21 11:01:25 +01:00
M Chetan Kumar
64302024bc net: wwan: iosm: devlink fw flashing & cd collection documentation
Documents devlink params, fw update & cd collection commands
and its usage.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20 10:03:37 +01:00
Alejandro Concepcion-Rodriguez
48e6d083b3 docs: net: dsa: sja1105: fix reference to sja1105.txt
The file sja1105.txt was converted to nxp,sja1105.yaml.

Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19 12:45:03 +01:00
Linus Torvalds
626bf91a29 Networking stragglers and fixes for 5.15-rc1, including changes from netfilter,
wireless and can.
 
 Current release - regressions:
 
  - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi
 
  - ip_gre: validate csum_start only on pull
 
  - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels
 
  - ionic: fix double use of queue-lock, fix a sleeping in atomic
 
  - can: c_can: fix null-ptr-deref on ioctl()
 
  - cs89x0: disable compile testing on powerpc
 
 Current release - new code bugs:
 
  - bridge: mcast: fix vlan port router deadlock, consistently disable BH
 
 Previous releases - regressions:
 
  - dsa: tag_rtl4_a: fix egress tags, only port 0 was working
 
  - mptcp: fix possible divide by zero
 
  - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
 
  - netfilter: socket: icmp6: fix use-after-scope
 
  - stmmac: fix MAC not working when system resume back with WoL active
 
 Previous releases - always broken:
 
  - ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL
                address
 
  - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6
 
  - mptcp: only send extra TCP acks in eligible socket states
 
  - dsa: lantiq_gswip: fix maximum frame length
 
  - stmmac: fix overall budget calculation for rxtx_napi
 
  - bnxt_en: fix firmware version reporting via devlink
 
  - renesas: sh_eth: add missing barrier to fix freeing wrong tx descriptor
 
 Stragglers:
 
  - netfilter: conntrack: switch to siphash
 
  - netfilter: refuse insertion if chain has grown too large
 
  - ncsi: add get MAC address command to get Intel i210 MAC address
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmE3uicACgkQMUZtbf5S
 IrtJVA//XdE8qAmw1JukjyYC87JH2ale20eoZ6ERn7/09e4tdv3M6dOTI4YfrM6+
 CMNP5MP2qit3IzY+lN0+yt9AAFH7k85z3MA8zLxsXN4z63OJcZvFv/G/OWy4Wp/0
 vOo/DH+rF3LR+fZZvjJI+8Xi9/orsRpD12cwGmjGRxybh+XcnHKI/GvK2RgE6oBR
 015RfBbbQBpzFQvESLnSwDzabN1XFEL1x/bz7N8ek3okfO/tab+f3E1tb6eYtTy+
 jyDyOWpayd4xDttKNMUuxwS1q+/oAWOAq8PzkaF/ZG2sBH1Z4yZN9ZtsLNZmPG8N
 5L1FEem/Nmgr54T9v/FhfiryhhGGysVfVgtQcCBkKRmVn1Kk2L6dFvtuanPtFFd3
 llbi5PvCDJy3rbMmxKmyoM3T4jpMwWxQRZKsosw+k/WQfb8/SUOjgpY713V1Wx/P
 S+2uadU4l9Ql9sF6X0IqZABnnt+j/BuDo6C6vVq7vyj0iQ9hEX9YxC0ybrAHOYpH
 suHWKndodRfTxxVOg8xRNYwXyRLNbm1AP6LMDNKBlFUjwNSZ362qFX7W7DuXoRup
 Rrnb8V1QFvM+pyFb2a0qNtBS68IXbjCdVQX5e8a5ELaAUnDPefNrfPN+/rrTLEtV
 LnusmBF+02llVSYdr88t1e+LmzqS/aqXFy2ry4y6owjq20ld2O0=
 =Zvuz
 -----END PGP SIGNATURE-----

Merge tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes and stragglers from Jakub Kicinski:
 "Networking stragglers and fixes, including changes from netfilter,
  wireless and can.

  Current release - regressions:

   - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi

   - ip_gre: validate csum_start only on pull

   - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels

   - ionic: fix double use of queue-lock, fix a sleeping in atomic

   - can: c_can: fix null-ptr-deref on ioctl()

   - cs89x0: disable compile testing on powerpc

  Current release - new code bugs:

   - bridge: mcast: fix vlan port router deadlock, consistently disable
     BH

  Previous releases - regressions:

   - dsa: tag_rtl4_a: fix egress tags, only port 0 was working

   - mptcp: fix possible divide by zero

   - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex

   - netfilter: socket: icmp6: fix use-after-scope

   - stmmac: fix MAC not working when system resume back with WoL active

  Previous releases - always broken:

   - ip/ip6_gre: use the same logic as SIT interfaces when computing
     v6LL address

   - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6

   - mptcp: only send extra TCP acks in eligible socket states

   - dsa: lantiq_gswip: fix maximum frame length

   - stmmac: fix overall budget calculation for rxtx_napi

   - bnxt_en: fix firmware version reporting via devlink

   - renesas: sh_eth: add missing barrier to fix freeing wrong tx
     descriptor

  Stragglers:

   - netfilter: conntrack: switch to siphash

   - netfilter: refuse insertion if chain has grown too large

   - ncsi: add get MAC address command to get Intel i210 MAC address"

* tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
  ieee802154: Remove redundant initialization of variable ret
  net: stmmac: fix MAC not working when system resume back with WoL active
  net: phylink: add suspend/resume support
  net: renesas: sh_eth: Fix freeing wrong tx descriptor
  bonding: 3ad: pass parameter bond_params by reference
  cxgb3: fix oops on module removal
  can: c_can: fix null-ptr-deref on ioctl()
  can: rcar_canfd: add __maybe_unused annotation to silence warning
  net: wwan: iosm: Unify IO accessors used in the driver
  net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors
  net: qcom/emac: Replace strlcpy with strscpy
  ip6_gre: Revert "ip6_gre: add validation for csum_start"
  net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static
  selftests/bpf: Test XDP bonding nest and unwind
  bonding: Fix negative jump label count on nested bonding
  MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry
  stmmac: dwmac-loongson:Fix missing return value
  iwlwifi: fix printk format warnings in uefi.c
  net: create netdev->dev_addr assignment helpers
  bnxt_en: Fix possible unintended driver initiated error recovery
  ...
2021-09-07 14:02:58 -07:00
Jakub Kicinski
10905b4a68 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Protect nft_ct template with global mutex, from Pavel Skripkin.

2) Two recent commits switched inet rt and nexthop exception hashes
   from jhash to siphash. If those two spots are problematic then
   conntrack is affected as well, so switch voer to siphash too.
   While at it, add a hard upper limit on chain lengths and reject
   insertion if this is hit. Patches from Florian Westphal.

3) Fix use-after-scope in nf_socket_ipv6 reported by KASAN,
   from Benjamin Hesmans.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: socket: icmp6: fix use-after-scope
  netfilter: refuse insertion if chain has grown too large
  netfilter: conntrack: switch to siphash
  netfilter: conntrack: sanitize table size default settings
  netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
====================

Link: https://lore.kernel.org/r/20210903163020.13741-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-03 16:20:37 -07:00