IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Update ufshcd_clear_cmd() to clean up the MCQ resources similar to the
function ufshcd_utrl_clear() does for SDB mode.
Update ufshcd_try_to_abort_task() to support MCQ mode so that this function
can be invoked in either mcq or SDB mode.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/dc6d30b3ee55e2072c162b2c08504ba349b87139.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add supporting functions to handle UFS abort in MCQ mode.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/d452c5ad62dc863cc067ec82daa0885ec98bd508.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the ufshcd_clear_cmds(), the 2nd parameter would be the bit mask of the
command to be cleared in the transfer request door bell register. This bit
mask mechanism does not scale well in MCQ mode when the queue depth becomes
much greater than 64. Change the 2nd parameter to the function to be the
task_tag number of the corresponding bit to be cleared in the door bell
register. By doing so, MCQ mode with a large queue depth can reuse this
function.
Since the behavior of this function is changed from handling multiple
commands into a single command, rename ufshcd_clear_cmds() into
ufshcd_clear_cmd().
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/8411fb5363acc90519bced30ea2c2ac582ff2340.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UTP command descriptor base address is a 57-bit field in the UTP
transfer request descriptor. Combine the two 32-bit
command_desc_base_addr_lo/hi fields into a 64-bit for better handling of
this field.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/4e6f7f5a15000cdae77c3014b477264f57bf572c.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not open code SZ_x.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20230531070009.4593-1-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
In the traces we recorded while testing zoned storage we noticed that UFS
commands are requeued while the clock is being ungated. Command requeueing
makes it harder than necessary to preserve the command order. Hence this
patch series that modifies the SCSI core and also the UFS driver such that
clock ungating does not trigger command requeueing.
Link: https://lore.kernel.org/r/20230529202640.11883-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ungating the clock asynchronously causes ufshcd_queuecommand() to return
SCSI_MLQUEUE_HOST_BUSY and hence causes commands to be requeued. This is
suboptimal. Allow ufshcd_queuecommand() to sleep such that clock ungating
does not trigger command requeuing. Remove the ufshcd_scsi_block_requests()
and ufshcd_scsi_unblock_requests() calls because these are no longer
needed. The flush_work(&hba->clk_gating.ungate_work) call is sufficient to
make the SCSI core wait for clock ungating to complete.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230529202640.11883-6-bvanassche@acm.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_hold() and ufshcd_release are declared twice: once in
drivers/ufs/core/ufshcd-priv.h and a second time in include/ufs/ufshcd.h.
Remove the declarations from ufshcd-priv.h.
Fixes: dd11376b9f1b ("scsi: ufs: Split the drivers/scsi/ufs directory")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230529202640.11883-5-bvanassche@acm.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for adding code in ufshcd_queuecommand() that may sleep.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230529202640.11883-4-bvanassche@acm.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'err' variable is used only as the result of
ufshcd_hba_init_crypto_capabilities(), so return 'err' immediately when
failed. If it is not an error, explicitly return 0.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230503104630epcms2p8b82734102ffb920531e9264604086372@epcms2p8
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since MAXQ is 0-based value, add one to obtain number of hardware queues.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230504154454.26654-4-powen.kao@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Naming the functions after standard operators like sizeof() may cause
confusion. Rename it to ufshcd_get_ucd_size().
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230504154454.26654-3-powen.kao@mediatek.com
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The transfer command descriptor is allocated in ufshcd_memory_alloc() and
referenced by the transfer request descriptor with stride size
sizeof_utp_transfer_cmd_desc() instead of sizeof(struct
utp_transfer_cmd_desc).
Consequently, computing tag by address offset should also refer to the
same stride.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230504154454.26654-2-powen.kao@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is already a test for "if (val == state)" earlier so it's not
possible here. Delete the dead code.
Fixes: 9006e3986f66 ("scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered yet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/68fce64f-4970-45f1-807e-6c0eecdfcdc2@kili.mountain
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mcq_mode_ops uses only param_{set,get}_bool(). Therefore, convert
module_param_cb() to module_param() and remove the mcq_mode_ops.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230427094420epcms2p1043333a3e0c0cf58e66164e0b83b3b02@epcms2p1
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Even when urgent BKOPS fails, the consumer will get stuck in runtime
suspend status. Like commit 1a5665fc8d7a ("scsi: ufs: core: WLUN suspend
SSU/enter hibern8 fail recovery"), trigger the error handler and return
-EBUSY to break the suspend.
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230425031721epcms2p5d4de65616478c967d466626e20c42a3a@epcms2p5
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Six late arriving patches for the merge window. Five are minor
assorted fixes and updates. The IPR driver change removes SATA
support, which will now allow a major cleanup in the ATA subsystem
because it was the only driver still using the old attachment
mechanism. The driver is only used on power systems and SATA was used
to support a DVD device, which has long been moved to a different hba.
IBM chose this route instead of porting ipr to the newer SATA
interfaces.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZFZGfiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbgIAP9V4dKN
e5xLwf4q9+bKKCSCmlMrPeAnfJXyWdW6VWvWhQD9H4bgemsWhcUOztvpB2pOUpYx
JaJCgj/MAA0FSXhy3Bk=
=FwUd
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Six late arriving patches for the merge window. Five are minor
assorted fixes and updates.
The IPR driver change removes SATA support, which will now allow a
major cleanup in the ATA subsystem because it was the only driver
still using the old attachment mechanism. The driver is only used on
power systems and SATA was used to support a DVD device, which has
long been moved to a different hba. IBM chose this route instead of
porting ipr to the newer SATA interfaces"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Fix use after free bug in qedi_remove()
scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
scsi: ipr: Remove several unused variables
scsi: pm80xx: Log device registration
scsi: ipr: Remove SATA support
scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
mpi3mr, hisi_sas, arcmsr). The major core change is the
constification of the host templates (which touches everything) along
with other minor fixups and clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZEmJACYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU4FAP0WYhFC
rkbY203/+ErUuwvOKum0VwJKUowCaUD0MBwScAD+Ok/NWobmjdXUBbPUbvVkr+hE
8B/xs9hodX+1fVJcVG0=
=fS/j
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
mpi3mr, hisi_sas, arcmsr).
The major core change is the constification of the host templates
(which touches everything) along with other minor fixups and clean
ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()
scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately
scsi: cxlflash: s/semahpore/semaphore/
scsi: lpfc: Silence an incorrect device output
scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation
scsi: scsi_debug: Fix missing error code in scsi_debug_init()
scsi: hisi_sas: Work around build failure in suspend function
scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
scsi: mpt3sas: Fix an issue when driver is being removed
scsi: mpt3sas: Remove HBA BIOS version in the kernel log
scsi: target: core: Fix invalid memory access
scsi: scsi_debug: Drop sdebug_queue
scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts
scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store()
scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued()
scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll()
scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd
scsi: scsi_debug: Use scsi_block_requests() to block queues
scsi: scsi_debug: Protect block_unblock_all_queues() with mutex
scsi: scsi_debug: Change shost list lock to a mutex
...
When ufshcd_err_handler() is executed, CQ event interrupt can enter waiting
for the same lock. This can happen in ufshcd_handle_mcq_cq_events() and
also in ufs_mtk_mcq_intr(). The following warning message will be generated
when &hwq->cq_lock is used in IRQ context with IRQ enabled. Use
ufshcd_mcq_poll_cqe_lock() with spin_lock_irqsave instead of spin_lock to
resolve the deadlock issue.
[name:lockdep&]WARNING: inconsistent lock state
[name:lockdep&]--------------------------------
[name:lockdep&]inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[name:lockdep&]kworker/u16:4/260 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffffff8028444600 (&hwq->cq_lock){?.-.}-{2:2}, at:
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
[name:lockdep&]{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x17c/0x33c
_raw_spin_lock+0x5c/0x7c
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
ufs_mtk_mcq_intr+0x60/0x1bc [ufs_mediatek_mod]
__handle_irq_event_percpu+0x140/0x3ec
handle_irq_event+0x50/0xd8
handle_fasteoi_irq+0x148/0x2b0
generic_handle_domain_irq+0x4c/0x6c
gic_handle_irq+0x58/0x134
call_on_irq_stack+0x40/0x74
do_interrupt_handler+0x84/0xe4
el1_interrupt+0x3c/0x78
<snip>
Possible unsafe locking scenario:
CPU0
----
lock(&hwq->cq_lock);
<Interrupt>
lock(&hwq->cq_lock);
*** DEADLOCK ***
2 locks held by kworker/u16:4/260:
[name:lockdep&]
stack backtrace:
CPU: 7 PID: 260 Comm: kworker/u16:4 Tainted: G S W OE
6.1.17-mainline-android14-2-g277223301adb #1
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0x10c/0x160
show_stack+0x20/0x30
dump_stack_lvl+0x98/0xd8
dump_stack+0x20/0x60
print_usage_bug+0x584/0x76c
mark_lock_irq+0x488/0x510
mark_lock+0x1ec/0x25c
__lock_acquire+0x4d8/0xffc
lock_acquire+0x17c/0x33c
_raw_spin_lock+0x5c/0x7c
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
ufshcd_poll+0x68/0x1b0
ufshcd_transfer_req_compl+0x9c/0xc8
ufshcd_err_handler+0x3bc/0xea0
process_one_work+0x2f4/0x7e8
worker_thread+0x234/0x450
kthread+0x110/0x134
ret_from_fork+0x10/0x20
Fixes: ed975065c31c ("scsi: ufs: core: mcq: Add completion support in poll")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Link: https://lore.kernel.org/r/20230424080400.8955-1-alice.chao@mediatek.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "is_valid" field of the struct ufs_saved_pwr_info is no longer used,
and this struct can be replaced by struct ufs_pa_layer_attr without any
changes to the functionality.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Link: https://lore.kernel.org/r/20230330012918.13748-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
It helps humans and the compiler if it is made explicit that SCSI host
templates are not modified. Hence this patch series that constifies most
SCSI host templates. Please consider this patch series for the next merge
window.
Link: https://lore.kernel.org/r/20230322195515.1267197-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr() does not make any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).
drivers/ufs/host/ufs-hisi.c:561:34: error: ‘ufs_hisi_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214435.275127-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr() does not make any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).
drivers/ufs/host/ufs-exynos.c:1738:34: error: ‘exynos_ufs_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214435.275127-2-krzysztof.kozlowski@linaro.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver can be built on ACPI and its .of_match_table uses
of_match_ptr(), thus annotate the actual table as maybe unused.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214435.275127-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We don't have outstanding_reqs bitmap in MCQ mode. Considering that the
queue depth may increase beyond 64 in the future, rework ufshcd_print_trs()
to get rid of bitmap usage so that we can print trs for pending requests in
both SDB and MCQ mode.
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1678865517-43139-1-git-send-email-quic_ziqichen@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is important for the SCSI core to know the residual byte count. Hence,
extract the residual byte count from the UFS response and pass it to the
SCSI core. A few examples of the output of a debugging patch that has been
applied on top of this patch:
[ 1.937750] cmd 0x12: len = 255; resid = 241
[ ... ]
[ 1.993400] cmd 0xa0: len = 4096; resid = 4048
[ ... ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230314205844.313519-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Neither UFS host controllers nor UFS devices require a ten second delay
after a host reset or after a bus reset. Hence this patch.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230314205822.313447-1-bvanassche@acm.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Multi Circular Queue doesn't use outstanding_reqs. However, the UFS clock
scaling functions use outstanding_reqs to determine if there are requests
pending. When MCQ is enabled, this check always returns false.
Hence use active_reqs to check if there are pending requests.
Fixes: eacb139b77ff ("scsi: ufs: core: mcq: Enable multi-circular queue")
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/a24e0d646aac70eae0fc5e05fac0c58bb7e6e680.1678317160.git.quic_asutoshd@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch static checker reported:
drivers/ufs/host/ufs-qcom.c:1469
ufs_qcom_mcq_config_resource() info: returning a literal zero is
cleaner
Fix the above warning by returning in place instead of a jump to a label.
Also remove the usage of devm_kfree() as it's unnecessary in this function.
Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Link: https://lore.kernel.org/r/3ebd2582af74b81ef7b57149f57c6a3bf0963953.1677721229.git.quic_asutoshd@quicinc.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix an error case in ufs_qcom_mcq_config_resource(), where the return value
is set to 0 before passing it to PTR_ERR.
This led to Smatch warning:
drivers/ufs/host/ufs-qcom.c:1455 ufs_qcom_mcq_config_resource() warn:
passing zero to 'PTR_ERR'
Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Link: https://lore.kernel.org/r/94ca99b327af634799ce5f25d0112c28cd00970d.1677721072.git.quic_asutoshd@quicinc.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "dev_req_params" pointer points to inside the middle of a struct so it
can't be NULL. Removing this impossible condition is nice because now we
don't need to consider the correct error code for that situation.
Link: https://lore.kernel.org/r/Y/yA3niWUcGYgBU8@kili
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufshcd driver uses simpleondemand governor for devfreq. Add it to the
list of ufshcd softdeps to allow userspace initramfs tools like dracut to
automatically pull the governor module into the initramfs together with UFS
drivers.
Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates that missed the first pull, mostly because of needing more
soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug
fixes), an enclosure services (ses) update (mostly bug fixes) and
other minor bug fixes and changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZAJf2SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWYeAP9u6umX
5Trq6mtfdPyhSxIhgD6AwJDgVkeApSKAHZRu0AD/dfMTQmeaJory4LD4JW+uAgVl
yFPVz9VPlKTiaM2lwUI=
=BKzr
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
soak time.
Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
enclosure services (ses) update (mostly bug fixes) and other minor bug
fixes and changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: zfcp: Trace when request remove fails after qdio send fails
scsi: zfcp: Change the type of all fsf request id fields and variables to u64
scsi: zfcp: Make the type for accessing request hashtable buckets size_t
scsi: ufs: core: Simplify ufshcd_execute_start_stop()
scsi: ufs: core: Rely on the block layer for setting RQF_PM
scsi: core: Extend struct scsi_exec_args
scsi: lpfc: Fix double word in comments
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
scsi: core: Fix a source code comment
scsi: cxgbi: Remove unneeded version.h include
scsi: qedi: Remove unneeded version.h include
scsi: mpi3mr: Remove unneeded version.h include
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Use number of bits to manage bitmap sizes
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Fix an issue found by KASAN
scsi: mpi3mr: Replace 1-element array with flex-array
scsi: ipr: Work around fortify-string warning
scsi: ipr: Make ipr_probe_ioa_part2() return void
...
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major
core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY/Z7BSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfF9AP9HzZaZ
0XumuxjchcJHRntcIAzb9kE62SSWFxBrgZQCtAEAyhAO1zK284esgCa+arkzEC7p
uhxpufQSGnYvbasStsU=
=VsH1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).
The major core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
scsi: ufs: core: Fix device management cmd timeout flow
scsi: aic94xx: Add missing check for dma_map_single()
scsi: smartpqi: Replace one-element array with flexible-array member
scsi: mpt3sas: Fix a memory leak
scsi: qla2xxx: Remove the unused variable wwn
scsi: ufs: core: Fix kernel-doc syntax
scsi: ufs: core: Add hibernation callbacks
scsi: snic: Fix memory leak with using debugfs_lookup()
scsi: ufs: core: Limit DMA alignment check
scsi: Documentation: Correct spelling
scsi: Documentation: Correct spelling
scsi: target: Documentation: Correct spelling
scsi: aacraid: Allocate cmd_priv with scsicmd
scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
scsi: ufs: core: Enable DMA clustering
scsi: ufs: exynos: Fix the maximum segment size
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
...
Use scsi_execute_cmd() instead of open-coding it.
Link: https://lore.kernel.org/r/20230210193258.4004923-4-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not set RQF_PM explicitly since scsi_alloc_request() sets it indirectly
if BLK_MQ_REQ_PM is set. The call chain for the code that sets RQF_PM is as
follows:
scsi_alloc_request()
blk_mq_alloc_request()
__blk_mq_alloc_requests()
blk_mq_rq_ctx_init()
if (data->flags & BLK_MQ_REQ_PM)
data->rq_flags |= RQF_PM;
Link: https://lore.kernel.org/r/20230210193258.4004923-3-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_config_mcq() may change the can_queue value. The current code
invokes scsi_add_host() before ufshcd_config_mcq() so the tags are
limited to the original can_queue value.
Fix this by invoking scsi_add_host() after ufshcd_config_mcq().
Link: https://lore.kernel.org/r/8840cea4a57b46dabce18acc39afc50ab826330f.1676567593.git.quic_asutoshd@quicinc.com
Fixes: 2468da61ea09 ("scsi: ufs: core: mcq: Configure operation and runtime interface")
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following compilation error when CONFIG_PM is set to 'n':
drivers/ufs/host/ufs-mediatek.c: In function `ufs_mtk_runtime_suspend`:
drivers/ufs/host/ufs-mediatek.c:1623:8: error: implicit declaration of
function `ufshcd_runtime_suspend`; did you mean `ufs_mtk_runtime_suspend`?
[-Werror=implicit-function-declaration]
1623 | ret = ufshcd_runtime_suspend(dev);
| ^~~~~~~~~~~~~~~~~~~~~~
| ufs_mtk_runtime_suspend
drivers/ufs/host/ufs-mediatek.c: In function `ufs_mtk_runtime_resume`:
drivers/ufs/host/ufs-mediatek.c:1638:9: error: implicit declaration of function
`ufshcd_runtime_resume`; did you mean `ufs_mtk_runtime_resume`?
[-Werror=implicit-function-declaration]
1638 | return ufshcd_runtime_resume(dev);
| ^~~~~~~~~~~~~~~~~~~~~
| ufs_mtk_runtime_resume
At top level:
drivers/ufs/host/ufs-mediatek.c:1632:12: error: `ufs_mtk_runtime_resume`
defined but not used [-Werror=unused-function]
1632 | static int ufs_mtk_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/ufs/host/ufs-mediatek.c:1618:12: error: `ufs_mtk_runtime_suspend`
defined but not used [-Werror=unused-function]
1618 | static int ufs_mtk_runtime_suspend(struct device *dev)
Link: https://lore.kernel.org/r/20230220142431.54589-1-frank.li@vivo.com
Reported-by: k2ci <kernel-bot@kylinos.cn>
Reported-by: Shida Zhang <zhangshida@kylinos.cn>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During UFS initialization, devfreq initialization is asynchronous:
ufshcd_async_scan() calls ufshcd_add_lus(), which in turn initializes
devfreq for UFS. The simple ondemand governor is then loaded. If it is
built as a module, request_module() is called and throws a warning:
WARNING: CPU: 7 PID: 167 at kernel/kmod.c:136 __request_module+0x1e0/0x460
Modules linked in: crct10dif_ce llcc_qcom phy_qcom_qmp_usb ufs_qcom phy_qcom_snps_femto_v2 ufshcd_pltfrm phy_qcom_qmp_combo ufshcd_core phy_qcom_qmp_ufs qcom_wdt socinfo fuse ipv6
CPU: 7 PID: 167 Comm: kworker/u16:3 Not tainted 6.2.0-rc6-00009-g58706f7fb045 #1
Hardware name: Qualcomm SA8540P Ride (DT)
Workqueue: events_unbound async_run_entry_fn
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __request_module+0x1e0/0x460
lr : __request_module+0x1d8/0x460
sp : ffff800009323b90
x29: ffff800009323b90 x28: 0000000000000000 x27: 0000000000000000
x26: ffff800009323d50 x25: ffff7b9045f57810 x24: ffff7b9045f57830
x23: ffffdc5a83e426e8 x22: ffffdc5ae80a9818 x21: 0000000000000001
x20: ffffdc5ae7502f98 x19: ffff7b9045f57800 x18: ffffffffffffffff
x17: 312f716572667665 x16: 642f7366752e3030 x15: 0000000000000000
x14: 000000000000021c x13: 0000000000005400 x12: ffff7b9042ed7614
x11: ffff7b9042ed7600 x10: 00000000636c0890 x9 : 0000000000000038
x8 : ffff7b9045f2c880 x7 : ffff7b9045f57c68 x6 : 0000000000000080
x5 : 0000000000000000 x4 : 8000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffffdc5ae5d382f0 x0 : 0000000000000001
Call trace:
__request_module+0x1e0/0x460
try_then_request_governor+0x7c/0x100
devfreq_add_device+0x4b0/0x5fc
ufshcd_async_scan+0x1d4/0x310 [ufshcd_core]
async_run_entry_fn+0x34/0xe0
process_one_work+0x1d0/0x320
worker_thread+0x14c/0x444
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
This occurs because synchronous module loading from async is not
allowed. According to __request_module():
/*
* We don't allow synchronous module loading from async. Module
* init may invoke async_synchronize_full() which will end up
* waiting for this task which already is waiting for the module
* loading to complete, leading to a deadlock.
*/
Such a deadlock was experienced on the Qualcomm QDrive3/sa8540p-ride. With
DEVFREQ_GOV_SIMPLE_ONDEMAND=m, the boot hangs after the warning.
Fix both the warning and the deadlock by moving devfreq initialization out
of the async routine.
Tested on the sa8540p-ride by using fio to put the UFS under load, and
printing the trace generated by
/sys/kernel/tracing/events/ufs/ufshcd_clk_scaling events. The trace looks
similar with and without the change.
Link: https://lore.kernel.org/r/20230217194423.42553-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The TC G210 driver only supports devices declared in the device tree.
Hence make this driver dependent on CONFIG_OF. This patch fixes the
following compiler error:
drivers/ufs/host/tc-dwc-g210-pltfrm.c:36:34: error: ‘tc_dwc_g210_pltfm_match’ defined but not used [-Werror=unused-const-variable=]
36 | static const struct of_device_id tc_dwc_g210_pltfm_match[] = {
|
Link: https://lore.kernel.org/r/20230209184914.2762172-1-bvanassche@acm.org
Cc: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
