IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The taprio qdisc allows to set mqprio setting but only once. In case
if mqprio settings are provided next time the error is returned as
it's not allowed to change traffic class mapping in-flignt and that
is normal. But if configuration is absolutely the same - no need to
return error. It allows to provide same command couple times,
changing only base time for instance, or changing only scheds maps,
but leaving mqprio setting w/o modification. It more corresponds the
message: "Changing the traffic mapping of a running schedule is not
supported", so reject mqprio if it's really changed.
Also corrected TC_BITMASK + 1 for consistency, as proposed.
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't swap oper and admin schedules too early, it's not correct and
causes crash.
Steps to reproduce:
1)
tc qdisc replace dev eth0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 1@2 \
base-time $SOME_BASE_TIME \
sched-entry S 01 80000 \
sched-entry S 02 15000 \
sched-entry S 04 40000 \
flags 2
2)
tc qdisc replace dev eth0 parent root handle 100 taprio \
base-time $SOME_BASE_TIME \
sched-entry S 01 90000 \
sched-entry S 02 20000 \
sched-entry S 04 40000 \
flags 2
3)
tc qdisc replace dev eth0 parent root handle 100 taprio \
base-time $SOME_BASE_TIME \
sched-entry S 01 150000 \
sched-entry S 02 200000 \
sched-entry S 04 40000 \
flags 2
Do 2 3 2 .. steps more times if not happens and observe:
[ 305.832319] Unable to handle kernel write to read-only memory at
virtual address ffff0000087ce7f0
[ 305.910887] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
[ 305.919306] Hardware name: Texas Instruments AM654 Base Board (DT)
[...]
[ 306.017119] x1 : ffff800848031d88 x0 : ffff800848031d80
[ 306.022422] Call trace:
[ 306.024866] taprio_free_sched_cb+0x4c/0x98
[ 306.029040] rcu_process_callbacks+0x25c/0x410
[ 306.033476] __do_softirq+0x10c/0x208
[ 306.037132] irq_exit+0xb8/0xc8
[ 306.040267] __handle_domain_irq+0x64/0xb8
[ 306.044352] gic_handle_irq+0x7c/0x178
[ 306.048092] el1_irq+0xb0/0x128
[ 306.051227] arch_cpu_idle+0x10/0x18
[ 306.054795] do_idle+0x120/0x138
[ 306.058015] cpu_startup_entry+0x20/0x28
[ 306.061931] rest_init+0xcc/0xd8
[ 306.065154] start_kernel+0x3bc/0x3e4
[ 306.068810] Code: f2fbd5b7 f2fbd5b6 d503201f f9400422 (f9000662)
[ 306.074900] ---[ end trace 96c8e2284a9d9d6e ]---
[ 306.079507] Kernel panic - not syncing: Fatal exception in interrupt
[ 306.085847] SMP: stopping secondary CPUs
[ 306.089765] Kernel Offset: disabled
Try to explain one of the possible crash cases:
The "real" admin list is assigned when admin_sched is set to
new_admin, it happens after "swap", that assigns to oper_sched NULL.
Thus if call qdisc show it can crash.
Farther, next second time, when sched list is updated, the admin_sched
is not NULL and becomes the oper_sched, previous oper_sched was NULL so
just skipped. But then admin_sched is assigned new_admin, but schedules
to free previous assigned admin_sched (that already became oper_sched).
Farther, next third time, when sched list is updated,
while one more swap, oper_sched is not null, but it was happy to be
freed already (while prev. admin update), so while try to free
oper_sched the kernel panic happens at taprio_free_sched_cb().
So, move the "swap emulation" where it should be according to function
comment from code.
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We get one warnings when build kernel W=1:
net/sched/sch_taprio.c:1155:6: warning: no previous prototype for ‘taprio_offload_config_changed’ [-Wmissing-prototypes]
Make the function static to fix this.
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
When configuring a taprio instance if "flags" is not specified (or
it's zero), taprio currently replies with an "Invalid argument" error.
So, set the return value to zero after we are done with all the
checks.
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
The check in taprio_set_picos_per_byte is currently not robust enough
and will trigger this division by zero, due to e.g. PHYLINK not setting
kset->base.speed when there is no PHY connected:
[ 27.109992] Division by zero in kernel.
[ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212
[ 27.121974] Hardware name: Freescale LS1021A
[ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14)
[ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4)
[ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18)
[ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0)
[ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68)
[ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4)
[ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec)
[ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4)
[ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8)
[ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc)
[ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114)
[ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c)
[ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340)
[ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24)
[ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228)
[ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c)
[ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0)
[ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000
[ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c
[ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64
Russell King points out that the ethtool API says zero is a valid return
value of __ethtool_get_link_ksettings:
* If it is enabled then they are read-only; if the link
* is up they represent the negotiated link mode; if the link is down,
* the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
* @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
So, it seems that taprio is not following the API... I'd suggest either
fixing taprio, or getting agreement to change the ethtool API.
The chosen path was to fix taprio.
Fixes: 7b9eba7ba0 ("net/sched: taprio: fix picos_per_byte miscalculation")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The speed divisor is used in a context expecting an s64, but it is
evaluated using 32-bit arithmetic.
To avoid that happening, instead of multiplying by 1,000,000 in the
first place, simplify the fraction and do a standard 32 bit division
instead.
Fixes: f04b514c0c ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte")
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows taprio to offload the schedule enforcement to capable
network cards, resulting in more precise windows and less CPU usage.
The gate mask acts on traffic classes (groups of queues of same
priority), as specified in IEEE 802.1Q-2018, and following the existing
taprio and mqprio semantics.
It is up to the driver to perform conversion between tc and individual
netdev queues if for some reason it needs to make that distinction.
Full offload is requested from the network interface by specifying
"flags 2" in the tc qdisc creation command, which in turn corresponds to
the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit.
The important detail here is the clockid which is implicitly /dev/ptpN
for full offload, and hence not configurable.
A reference counting API is added to support the use case where Ethernet
drivers need to keep the taprio offload structure locally (i.e. they are
a multi-port switch driver, and configuring a port depends on the
settings of other ports as well). The refcount_t variable is kept in a
private structure (__tc_taprio_qopt_offload) and not exposed to drivers.
In the future, the private structure might also be expanded with a
backpointer to taprio_sched *q, to implement the notification system
described in the patch (of when admin became oper, or an error occurred,
etc, so the offload can be monitored with 'tc qdisc show').
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The taprio budget needs to be adapted at runtime according to interface
link speed. But that handling is problematic.
For one thing, installing a qdisc on an interface that doesn't have
carrier is not illegal. But taprio prints the following stack trace:
[ 31.851373] ------------[ cut here ]------------
[ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4
[ 31.864566] taprio: dequeue() called with unknown picos per byte.
[ 31.864570] Modules linked in:
[ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689
[ 31.881398] Hardware name: Freescale LS1021A
[ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14)
[ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8)
[ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8)
[ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c)
[ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4)
[ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c)
[ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc)
[ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8)
[ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8)
[ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4)
[ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c)
[ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90)
[ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68)
[ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960
[ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94
[ 31.998363] 7b60: 60070013 ffffffff
[ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8)
[ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414)
[ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28)
[ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88)
[ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44)
[ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470)
[ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724)
[ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec)
[ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110)
[ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c)
[ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380)
[ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24)
[ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228)
[ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c)
[ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0)
[ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000
[ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c
[ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64
[ 32.150659] ---[ end trace 2139c9827c3e5177 ]---
This happens because the qdisc ->dequeue callback gets called. Which
again is not illegal, the qdisc will dequeue even when the interface is
up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames
will be dropped further down the stack in dev_direct_xmit().
And, at the end of the day, for what? For calculating the initial budget
of an interface which is non-operational at the moment and where frames
will get dropped anyway.
So if we can't figure out the link speed, default to SPEED_10 and move
along. We can also remove the runtime check now.
Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: 7b9eba7ba0 ("net/sched: taprio: fix picos_per_byte miscalculation")
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
taprio_init may fail earlier than this line:
list_add(&q->taprio_list, &taprio_list);
i.e. due to the net device not being multi queue.
Attempting to remove q from the global taprio_list when it is not part
of it will result in a kernel panic.
Fix it by matching list_add and list_del better to one another in the
order of operations. This way we can keep the deletion unconditional
and with lower complexity - O(1).
Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: 7b9eba7ba0 ("net/sched: taprio: fix picos_per_byte miscalculation")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched/sch_taprio.c:680:32: warning:
entry_list_policy defined but not used [-Wunused-const-variable=]
One of the points of commit a3d43c0d56 ("taprio: Add support adding
an admin schedule") is that it removes support (it now returns "not
supported") for schedules using the TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY
attribute (which were never used), the parsing of those types of schedules
was the only user of this policy. So removing this policy should be fine.
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In error case, all entries should be freed from the sched list
before deleting it. For simplicity use rcu way.
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the review of the iproute2 patches for txtime-assist mode, it was
pointed out that it does not make sense for the txtime-delay parameter to
be negative. So, change the type of the parameter from s32 to u32.
Fixes: 4cfd5779bd ("taprio: Add support for txtime-assist mode")
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the taprio qdisc is running in "txtime offload" mode, it will
set the launchtime value (in skb->tstamp) for all the packets which do
not have the SO_TXTIME socket option. But, the TCP packets already have
this value set and it indicates the earliest departure time represented
in CLOCK_MONOTONIC clock.
We need to respect the timestamp set by the TCP subsystem. So, convert
this time to the clock which taprio is using and ensure that the packet
is not transmitted before the deadline set by TCP.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Later in this series we will need to transform from
CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we are seeing non-critical packets being transmitted outside of
their timeslice. We can confirm that the packets are being dequeued at the
right time. So, the delay is induced in the hardware side. The most likely
reason is the hardware queues are starving the lower priority queues.
In order to improve the performance of taprio, we will be making use of the
txtime feature provided by the ETF qdisc. For all the packets which do not
have the SO_TXTIME option set, taprio will set the transmit timestamp (set
in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit
time for the packet is set to when the gate is open. If SO_TXTIME is set,
the TAPrio qdisc will validate whether the timestamp (in skb->tstamp)
occurs when the gate corresponding to skb's traffic class is open.
Following two parameters added to support this mode:
- flags: used to enable txtime-assist mode. Will also be used to enable
other modes (like hardware offloading) later.
- txtime-delay: This indicates the minimum time it will take for the packet
to hit the wire. This is useful in determining whether we can transmit
the packet in the remaining time if the gate corresponding to the packet is
currently open.
An example configuration for enabling txtime-assist:
tc qdisc replace dev eth0 parent root handle 100 taprio \\
num_tc 3 \\
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\
queues 1@0 1@0 1@0 \\
base-time 1558653424279842568 \\
sched-entry S 01 300000 \\
sched-entry S 02 300000 \\
sched-entry S 04 400000 \\
flags 0x1 \\
txtime-delay 40000 \\
clockid CLOCK_TAI
tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\
offload delta 200000 clockid CLOCK_TAI
Note that all the traffic classes are mapped to the same queue. This is
only possible in taprio when txtime-assist is enabled. Also, note that the
ETF Qdisc is enabled with offload mode set.
In this mode, if the packet's traffic class is open and the complete packet
can be transmitted, taprio will try to transmit the packet immediately.
This will be done by setting skb->tstamp to current_time + the time delta
indicated in the txtime-delay parameter. This parameter indicates the time
taken (in software) for packet to reach the network adapter.
If the packet cannot be transmitted in the current interval or if the
packet's traffic is not currently transmitting, the skb->tstamp is set to
the next available timestamp value. This is tracked in the next_launchtime
parameter in the struct sched_entry.
The behaviour w.r.t admin and oper schedules is not changed from what is
present in software mode.
The transmit time is already known in advance. So, we do not need the HR
timers to advance the schedule and wakeup the dequeue side of taprio. So,
HR timer won't be run when this mode is enabled.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove inline directive from length_to_duration(). We will let the compiler
make the decisions.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cycle time for a particular schedule is calculated only when it is first
installed. So, it makes sense to just calculate it once right after the
'cycle_time' parameter has been parsed and store it in cycle_time.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call to nla_nest_start_noflag can return a null pointer and currently
this is not being checked and this can lead to a null pointer dereference
when the null pointer sched_nest is passed to function nla_nest_end. Fix
this by adding in a null pointer check.
Addresses-Coverity: ("Dereference null return value")
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the
last entry of a schedule before the start of a new schedule can be
extended, so "too-short" entries can be avoided.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be
overridden, so the schedule is truncated to a determined "width".
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from
operational?) and "Admin" ones. Up until now, 'taprio' only had
support for the "Oper" one, added when the qdisc is created. This adds
support for the "Admin" one, which allows the .change() operation to
be supported.
Just for clarification, some quick (and dirty) definitions, the "Oper"
schedule is the currently (as in this instant) running one, and it's
read-only. The "Admin" one is the one that the system configurator has
installed, it can be changed, and it will be "promoted" to "Oper" when
it's 'base-time' is reached.
The idea behing this patch is that calling something like the below,
(after taprio is already configured with an initial schedule):
$ tc qdisc change taprio dev IFACE parent root \
base-time X \
sched-entry <CMD> <GATES> <INTERVAL> \
...
Will cause a new admin schedule to be created and programmed to be
"promoted" to "Oper" at instant X. If an "Admin" schedule already
exists, it will be overwritten with the new parameters.
Up until now, there was some code that was added to ease the support
of changing a single entry of a schedule, but was ultimately unused.
Now, that we have support for "change" with more well thought
semantics, updating a single entry seems to be less useful.
So we remove what is in practice dead code, and return a "not
supported" error if the user tries to use it. If changing a single
entry would make the user's life easier we may ressurrect this idea,
but at this point, removing it simplifies the code.
For now, only the schedule specific bits are allowed to be added for a
new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues'
cannot be modified.
Example:
$ tc qdisc change dev IFACE parent root handle 100 taprio \
base-time $BASE_TIME \
sched-entry S 00 500000 \
sched-entry S 0f 500000 \
clockid CLOCK_TAI
The only change in the netlink API introduced by this change is the
introduction of an "admin" type in the response to a dump request,
that type allows userspace to separate the "oper" schedule from the
"admin" schedule. If userspace doesn't support the "admin" type, it
will only display the "oper" schedule.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now, this isn't a problem, but the next commit allows schedules
to be added during runtime. When a new schedule transitions from the
inactive to the active state ("admin" -> "oper") the previous one can
be freed, if it's freed just after the RCU read lock is released, we
may access an invalid entry.
So, we should take care to protect the dequeue() flow, so all the
places that access the entries are protected by the RCU read lock.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have two levels of strict validation:
1) liberal (default)
- undefined (type >= max) & NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
- garbage at end of message accepted
2) strict (opt-in)
- NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
Split out parsing strictness into four different options:
* TRAILING - check that there's no trailing data after parsing
attributes (in message or nested)
* MAXTYPE - reject attrs > max known type
* UNSPEC - reject attributes with NLA_UNSPEC policy entries
* STRICT_ATTRS - strictly validate attribute size
The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().
Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.
We end up with the following renames:
* nla_parse -> nla_parse_deprecated
* nla_parse_strict -> nla_parse_deprecated_strict
* nlmsg_parse -> nlmsg_parse_deprecated
* nlmsg_parse_strict -> nlmsg_parse_deprecated_strict
* nla_parse_nested -> nla_parse_nested_deprecated
* nla_validate_nested -> nla_validate_nested_deprecated
Using spatch, of course:
@@
expression TB, MAX, HEAD, LEN, POL, EXT;
@@
-nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
+nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression TB, MAX, NLA, POL, EXT;
@@
-nla_parse_nested(TB, MAX, NLA, POL, EXT)
+nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)
@@
expression START, MAX, POL, EXT;
@@
-nla_validate_nested(START, MAX, POL, EXT)
+nla_validate_nested_deprecated(START, MAX, POL, EXT)
@@
expression NLH, HDRLEN, MAX, POL, EXT;
@@
-nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
+nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)
For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.
Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.
Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.
In effect then, this adds fully strict validation for any new command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.
Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().
Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:
@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)
@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case we don't have 'guard' or 'budget' to transmit the skb, we should
continue traversing the qdisc list since the remaining guard/budget
might be enough to transmit a skb from other children qdiscs.
Fixes: 5a781ccbd1 (“tc: Add support for configuring the taprio scheduler”)
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While traversing taprio's children qdisc list, if the gate is closed for
a given traffic class, we should continue traversing the list since the
remaining qdiscs may have skb ready for transmission.
This patch also takes this opportunity and changes the function to use
the TAPRIO_ALL_GATES_OPEN macro instead of the magic number '-1'.
Fixes: 5a781ccbd1 (“tc: Add support for configuring the taprio scheduler”)
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'entry' argument from should_restart_cycle() cannot be NULL since it
is already checked by the caller so the WARN_ON() within should_
restart_cycle() could be removed. By doing that, that function becomes
a dummy wrapper on list_is_last() so this patch simply gets rid of it
and call list_is_last() within advance_sched() instead.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch does a code refactoring to taprio_get_start_time() function
to improve readability and report error properly.
If 'base' time is later than 'now', the start time is equal to 'base'
and taprio_get_start_time() is done. That's the natural case so we move
that code to the beginning of the function. Also, if 'cycle' calculation
is zero, something went really wrong with taprio and we should log that
internal error properly.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes a pointless variable assigment in taprio_change().
The 'err' variable is not used from this assignment to the next one so
this patch removes it.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes to taprio did not use the correct div64 helpers,
leading to:
net/sched/sch_taprio.o: In function `taprio_dequeue':
sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3'
net/sched/sch_taprio.o: In function `advance_sched':
sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3'
net/sched/sch_taprio.o: In function `taprio_init':
sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3'
/home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed
Use math64 helpers.
Fixes: 7b9eba7ba0 ("net/sched: taprio: fix picos_per_byte miscalculation")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Time Aware Priority Scheduler is heavily dependent to link speed,
it relies on it to calculate transmission bytes per cycle, we can't
properly calculate the so called budget if the device has failed
to report the link speed.
In that case we can't dequeue packets assuming a wrong budget.
This patch makes sure we fail to dequeue case:
1) __ethtool_get_link_ksettings() reports error or 2) the ethernet
driver failed to set the ksettings' speed value (setting link speed
to SPEED_UNKNOWN).
Additionally we re calculate the budget whenever the link speed is
changed.
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Reviewed-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Classful qdiscs can't access directly the child qdiscs backlog
length: if such qdisc is NOLOCK, per CPU values should be
accounted instead.
Most qdiscs no not respect the above. As a result, qstats fetching
for most classful qdisc is currently incorrect: if the child qdisc is
NOLOCK, it always reports 0 len backlog.
This change introduces a pair of helpers to safely fetch
both backlog and qlen and use them in stats class dumping
functions, fixing the above issue and cleaning a bit the code.
DRR needs also to access the child qdisc queue length, so it
needs custom handling.
Fixes: c5ad119fb6 ("net: sched: pfifo_fast use skb_array")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
