IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB
can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb:
search the software IO TLB only if the device makes use of it"), the flag
is correctly set, but it is then never checked. Add the actual check here.
Note that this code is an alternative to the default pool check, not an
additional check, because:
1. swiotlb_find_pool() also searches the default pool;
2. if dma_uses_io_tlb is false, the default swiotlb pool is not used.
Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and
*not* using software IO TLB, this patch increases IOPS by approx 2% for
4-way parallel I/O.
The write memory barrier in swiotlb_dyn_alloc() is not needed, because a
newly allocated pool must always be observed by swiotlb_find_slots() before
an address from that pool is passed to is_swiotlb_buffer().
Correctness was verified using the following litmus test:
C swiotlb-new-pool
(*
* Result: Never
*
* Check that a newly allocated pool is always visible when the
* corresponding swiotlb buffer is visible.
*)
{
mem_pools = default;
}
P0(int **mem_pools, int *pool)
{
/* add_mem_pool() */
WRITE_ONCE(*pool, 999);
rcu_assign_pointer(*mem_pools, pool);
}
P1(int **mem_pools, int *flag, int *buf)
{
/* swiotlb_find_slots() */
int *r0;
int r1;
rcu_read_lock();
r0 = READ_ONCE(*mem_pools);
r1 = READ_ONCE(*r0);
rcu_read_unlock();
if (r1) {
WRITE_ONCE(*flag, 1);
smp_mb();
}
/* device driver (presumed) */
WRITE_ONCE(*buf, r1);
}
P2(int **mem_pools, int *flag, int *buf)
{
/* device driver (presumed) */
int r0 = READ_ONCE(*buf);
/* is_swiotlb_buffer() */
int r1;
int *r2;
int r3;
smp_rmb();
r1 = READ_ONCE(*flag);
if (r1) {
/* swiotlb_find_pool() */
rcu_read_lock();
r2 = READ_ONCE(*mem_pools);
r3 = READ_ONCE(*r2);
rcu_read_unlock();
}
}
exists (2:r0<>0 /\ 2:r3=0) (* Not found. *)
Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it")
Reported-by: Jonathan Corbet <corbet@lwn.net>
Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Andrew has changed addresses and the git tree has long since been at a
different location.
-----BEGIN PGP SIGNATURE-----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=SQij
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Jbmx
-----END PGP SIGNATURE-----
Merge tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes
ASPEED Maintainers update
Andrew has changed addresses and the git tree has long since been at a
different location.
* tag 'aspeed-6.6-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
Link: https://lore.kernel.org/r/CACPK8Xc+D=YBc2Dhk-6-gOuvKN0xGgZYNop6oJVa=VNgaEYOHw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The syscon poweroff and reboot nodes logically belong to the Power
Management Unit so populate possible children.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The reboot and poweroff features are actually part of the Power
Management Unit system controller, thus allow them as its children,
instead of specifying as separate device nodes with syscon phandle.
Without it, the reboot/poweroff feature becomes unavailable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now, "loongson,ls2k0500-pmc" is used as fallback compatible, so the
ls2k1000 compatible in the driver can be dropped directly.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Loongson-2K series chips (ls2k0500/ls2k1000/ls2k2000) share the same
PM system controller, using ls2k0500 compatible as fallback for the
others.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 67694c076bd7 ("soc: loongson2_pm: add power management
support"), the Loongson-2K PM driver was added, but it didn't update the
Kconfig entry for the INPUT dependency, leading to build errors, so
update the Kconfig entry to depend on INPUT.
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
drivers/soc/loongson/loongson2_pm.o: in function `loongson2_power_button_init':
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:101:(.text+0x350): undefined reference to `input_allocate_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:109:(.text+0x3dc): undefined reference to `input_set_capability'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:111:(.text+0x3e4): undefined reference to `input_register_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld:
/work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:125:(.text+0x3fc): undefined reference to `input_free_device'
/opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `input_report_key':
/work/lnx/next/linux-next-20230825/LOONG64/../include/linux/input.h:425:(.text+0x58c): undefined reference to `input_event'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Starfive:
A fix for the size of the NOR flash that was causing complaints from the
MTD subsystem during boot & two issues that a certain someone introduced
while resolving merge conflicts. Of the latter, one is a cosmetic
ordering change & the other lead to the usb controller being disabled.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZQWTcwAKCRB4tDGHoIJi
0ne4AP9ZmfxP2ddJK1YehAz1UBya0SyepjQKRuYySA9x+x9tGQD9GJo8mZj7RKoT
NLC+pBByca0YfsFKGtTLYQgljOjSUAg=
=noL2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YF+6
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-fixes-for-v6.6-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.6-rc3
Starfive:
A fix for the size of the NOR flash that was causing complaints from the
MTD subsystem during boot & two issues that a certain someone introduced
while resolving merge conflicts. Of the latter, one is a cosmetic
ordering change & the other lead to the usb controller being disabled.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.6-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: visionfive 2: Fix uart0 pins sort order
riscv: dts: starfive: visionfive 2: Enable usb0
riscv: dts: starfive: fix NOR flash reserved-data partition size
Link: https://lore.kernel.org/r/20230916-previous-oversold-9d30891ac6cf@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no code for this config option and enabling it in defconfig
causes warnings from tools which are detecting unused and obsolete
kernel config flags since the flag will be completely missing from
effective build config after "make olddefconfig".
Fixes yocto kernel recipe build time warning:
WARNING: [kernel config]: This BSP contains fragments with warnings:
...
[INFO]: the following symbols were not found in the active
configuration:
- CONFIG_COMMON_CLK_NPCM8XX
The flag was added with commit 45472f1e5348c7b755b4912f2f529ec81cea044b
v5.19-rc4-15-g45472f1e5348 so 6.1 and 6.4 stable kernel trees are
affected.
Fixes: 45472f1e5348c7b755b4912f2f529ec81cea044b ("arm64: defconfig: Add Nuvoton NPCM family support")
Cc: stable@kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Bruce Ashfield <bruce.ashfield@gmail.com>
Cc: Jon Mason <jon.mason@arm.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Ross Burton <ross@burtonini.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes for several ti-sysc interconnect target module driver issues for
external abort on non-linefetch, am35x soc match, and uart module quirks
handling needed for devices to work and to allow device wake-up to work.
Fixes for droid4 boot time errors and warnings as noticed after boot doing
dmesg -lerr,warn. Let's also cut down the debug uart noise by using
overrun-throttle-ms, and downgrade the u-boot version warnings to
debug statements to further reduce the boot time noise with warnings.
-----BEGIN PGP SIGNATURE-----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=MC3p
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmUT76kACgkQYKtH/8kJ
UifnDg//XBoZDNRWXC+Rg9Az/vHaQwURIznU2j2AgrPzfSKN3zfFKNeba3Y6XQ7E
mFVBmfxaKhzfOKMlSssoe0eObS7p2NqiZDx+jRtlt22g6UJopjRLUlZXcTZ++NiB
rkUho5HfvRhzWb1cqwf+ZDkKcNnMs6F2bg89XBfP3cGa5O8CGbuyt3TXkVvoaJZL
3n5vCIFJfIYJ7jx/6LMQyRU56bEhjhL/NTtmcqupr02PxtVk2VHIsVaWW/ttLv6g
iksKs5PAYxF5GRx4CkiTBYUkB2W4yZTK2ImoDipvtgzqCfkFYigPEL9E1wVPnr5w
L6rjgEgT+TNpomC5fOQ73bUIEQ5ZUQI0CuGfkTygJPkGSQGdsGfdPepT89U13wun
7G0S48lwVfdC/6vgV5MbKcQmBNN6ghrKKt1ppuZPPHyYNff5ig1CjEJXbv74MFX8
tIYynAngTROqtHsJKgIXhAd49pX/gMDHDTtRu0fXRCrMwSQQczoSC4mJcr3UX2Jr
m7k+Cq8iPOPZUWIIZ8/TLpXXe3ibcO1tYEgrz7cBlkN1I2/zEyR72dVy2cosrx5R
P/TVR2tNE5+E1EMVZsxcgLrZsL3h1pvXq1N6eQVTltXFnId70zplu5X5/id7ovFH
5aivXWvt0833Lz/Vu3pA/DkM1qMIDngFTwDHDXKlGJv1RayTztI=
=IurW
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps and ti-sysc
Fixes for several ti-sysc interconnect target module driver issues for
external abort on non-linefetch, am35x soc match, and uart module quirks
handling needed for devices to work and to allow device wake-up to work.
Fixes for droid4 boot time errors and warnings as noticed after boot doing
dmesg -lerr,warn. Let's also cut down the debug uart noise by using
overrun-throttle-ms, and downgrade the u-boot version warnings to
debug statements to further reduce the boot time noise with warnings.
* tag 'omap-for-v6.6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up
ARM: omap2+: Downgrade u-boot version warnings to debug statements
ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone
ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot
ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4
bus: ti-sysc: Fix missing AM35xx SoC matching
bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset()
Link: https://lore.kernel.org/r/pull-1695715881-95183@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:
kmod: zsmalloc: Unknown relocation type 109
kmod: fuse: Unknown relocation type 109
kmod: fuse: Unknown relocation type 109
kmod: radeon: Unknown relocation type 109
kmod: nf_tables: Unknown relocation type 109
kmod: nf_tables: Unknown relocation type 109
This is because the latest upstream binutils replaces a pair of ADD64
and SUB64 with 64_PCREL, so add support for 64_PCREL relocation type.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:
kmod: zsmalloc: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: pstore: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: fat: Unsupport relocation type 99, please add its support.
This is because the latest upstream binutils replaces a pair of ADD32
and SUB32 with 32_PCREL, so add support for 32_PCREL relocation type.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The relocation types from 101 to 109 are used by GNU binutils >= 2.41,
add their definitions to use them in later patches.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=include/elf/loongarch.h#l230
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For 64bit kernel without HIGHMEM, high_memory is the virtual address of
the highest physical address in the system. But __va(get_num_physpages()
<< PAGE_SHIFT) is not what we want for high_memory because there may be
holes in the physical address space. On the other hand, max_low_pfn is
calculated from memblock_end_of_DRAM(), which is exactly corresponding
to the highest physical address, so use it for high_memory calculation.
Cc: <stable@vger.kernel.org>
Fixes: d4b6f1562a3c3284adce ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.
This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.
Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.
timbgpio_gpio_set()
--> timbgpio_update_bit()
--> spin_lock(&tgpio->lock)
<interrupt>
--> timbgpio_irq_disable()
--> spin_lock_irqsave(&tgpio->lock)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Create buffers with cache coherency on the CPU side (write-back) while
disabling snooping on the VPU side. These buffers require an explicit
cache flush after each CPU-side modification.
Configuring pages as write-combined may introduce significant delays,
potentially taking hundreds of milliseconds for 64 MB buffers.
Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the
VPU side. Allocate FW runtime memory buffer (64 MB) as cached with
snooping-disabled.
This fixes random long FW loading times and boot params memory
corruption on warmboot (due to missed wmb).
Fixes: 02d5b0aacd05 ("accel/ivpu: Implement firmware parsing and booting")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926120943.GD846747@linux.intel.com
Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.
Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com
Do not enable frequency change interrupt on 40xx as it might
lead to an interrupt storm in current design.
FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause
KMD to check VPU interrupt sources by reading VPUIP registers.
Access to those registers will toggle necessary clocks and trigger
another FREQ_CHANGE interrupt possibly ending in an infinite loop.
FREQ_CHANGE interrupt has only debug purposes and can be permanently
disabled.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set
after configuring the workpoint. This step ensures that the VPU
microcontroller clock is actively toggling and ready for operation.
Previously, we relied solely on the READY bit in the VPU_STATUS
register, which indicated the completion of the workpoint download.
However, this approach was insufficient, as the READY bit could be set
while the device was still running on a sideband clock until the PLL
locked. To guarantee that the PLL is locked and the device is running on
the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before
proceeding with the remainder of the power-up sequence.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute
the dmesg.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-3-stanislaw.gruszka@linux.intel.com
If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:
[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0
To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.
Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com
Since I will continue to work on Nouveau consistently, also beyond my
former and still ongoing VM_BIND/EXEC work, add myself to the list of
Nouveau maintainers.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926014913.7721-1-dakr@redhat.com
* Remove double allocation of wq_update_pod_attrs_buf.
* Fix missing allocation of pwq_release_worker when
wq_cpu_intensive_thresh_us is set to a custom value.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZRHSyg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGbNYAP93prDoDUYHLha4NAXyZJ441+bBA5jnOOdRYLiw
cd0yugEAgFzQQ/4Z6wKosdwiGdrSn33IAgnDCGdAXVWzbyM+wQU=
=968G
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Remove double allocation of wq_update_pod_attrs_buf
- Fix missing allocation of pwq_release_worker when
wq_cpu_intensive_thresh_us is set to a custom value
* tag 'wq-for-6.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix missed pwq_release_worker creation in wq_cpu_intensive_thresh_init()
workqueue: Removed double allocation of wq_update_pod_attrs_buf
Ideally the busyness worker should take a gt pm wakeref because the
worker only needs to be active while gt is awake. However, the gt_park
path cancels the worker synchronously and this complicates the flow if
the worker is also running at the same time. The cancel waits for the
worker and when the worker releases the wakeref, that would call gt_park
and would lead to a deadlock.
The resolution is to take the global pm wakeref if runtime pm is already
active. If not, we don't need to update the busyness stats as the stats
would already be updated when the gt was parked.
Note:
- We do not requeue the worker if we cannot take a reference to runtime
pm since intel_guc_busyness_unpark would requeue the worker in the
resume path.
- If the gt was parked longer than time taken for GT timestamp to roll
over, we ignore those rollovers since we don't care about tracking the
exact GT time. We only care about roll overs when the gt is active and
running workloads.
- There is a window of time between gt_park and runtime suspend, where
the worker may run. This is acceptable since the worker will not find
any new data to update busyness.
v2: (Daniele)
- Edit commit message and code comment
- Use runtime pm in the worker
- Put runtime pm after enabling the worker
- Use Link tag and add Fixes tag
v3: (Daniele)
- Reword commit and comments and add details
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit e2f99b79d4c594cdf7ab449e338d4947f5ea8903)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is an assertion in ggtt_reserve_guc_top that the global GTT
is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit
platform; see commit 562d55d991b39ce376c492df2f7890fd6a541ffc
("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON
is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the
subsequent reservation fails and the driver fails to initialise
the device:
i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC
i915 0000:00:02.0: Device initialization failed (-28)
i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
i915: probe of 0000:00:02.0 failed with error -28
Make the reservation at the top of the available space, whatever
that is, instead of assuming that the top will be GUC_GGTT_TOP.
Fixes: 911800765ef6 ("drm/i915/uc: Reserve upper range of GGTT")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697dbcf62d6d8@otheo.eu
(cherry picked from commit 0f3fa942d91165c2702577e9274d2ee1c7212afc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The folio conversion changed the behaviour of shmem_sg_alloc_table() to
put the entire length of the last folio into the sg list, even if the sg
list should have been shorter. gen8_ggtt_insert_entries() relied on the
list being the right length and would overrun the end of the page tables.
Other functions may also have been affected.
Clamp the length of the last entry in the sg list to be the expected
length.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 0b62af28f249 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9256
Link: https://lore.kernel.org/lkml/6287208.lOV4Wx5bFT@natalenko.name/
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919194855.347582-1-willy@infradead.org
(cherry picked from commit 26a8e32e6d77900819c0c730fbfb393692dbbeea)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----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=6WEW
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- delayed refs fixes:
- fix race when refilling delayed refs block reserve
- prevent transaction block reserve underflow when starting
transaction
- error message and value adjustments
- fix build warnings with CONFIG_CC_OPTIMIZE_FOR_SIZE and
-Wmaybe-uninitialized
- fix for smatch report where uninitialized data from invalid extent
buffer range could be returned to the caller
- fix numeric overflow in statfs when calculating lower threshold
for a full filesystem
* tag 'for-6.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize start_slot in btrfs_log_prealloc_extents
btrfs: make sure to initialize start and len in find_free_dev_extent
btrfs: reset destination buffer when read_extent_buffer() gets invalid range
btrfs: properly report 0 avail for very full file systems
btrfs: log message if extent item not found when running delayed extent op
btrfs: remove redundant BUG_ON() from __btrfs_inc_extent_ref()
btrfs: return -EUCLEAN for delayed tree ref with a ref count not equals to 1
btrfs: prevent transaction block reserve underflow when starting transaction
btrfs: fix race when refilling delayed refs block reserve
This kselftest fixes update for Linux 6.6-rc4 consists of one
single fix to unmount tracefs when test created mount.
-----BEGIN PGP SIGNATURE-----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=5LK8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to unmount tracefs when test created mount"
* tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix to unmount tracefs when test created mount
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZRKHuAAKCRCRxhvAZXjc
ohOLAQDU9Fxq5UdqCdmsyi/b24XJFZlQhcVIZy2Hrhcor9TiVQEAjuECGlxFPSgj
atVOWLdugDJquiHextqTEMgIecJpNw4=
=uINF
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rc4.vfs.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains the usual miscellaneous fixes and cleanups for vfs and
individual fses:
Fixes:
- Revert ki_pos on error from buffered writes for direct io fallback
- Add missing documentation for block device and superblock handling
for changes merged this cycle
- Fix reiserfs flexible array usage
- Ensure that overlayfs sets ctime when setting mtime and atime
- Disable deferred caller completions with overlayfs writes until
proper support exists
Cleanups:
- Remove duplicate initialization in pipe code
- Annotate aio kioctx_table with __counted_by"
* tag 'v6.6-rc4.vfs.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
overlayfs: set ctime when setting mtime and atime
ntfs3: put resources during ntfs_fill_super()
ovl: disable IOCB_DIO_CALLER_COMP
porting: document superblock as block device holder
porting: document new block device opening order
fs/pipe: remove duplicate "offset" initializer
fs-writeback: do not requeue a clean inode having skipped pages
aio: Annotate struct kioctx_table with __counted_by
direct_write_fallback(): on error revert the ->ki_pos update from buffered write
reiserfs: Replace 1-element array with C99 style flex-array
Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZRIFKAAKCRCMstVUGiXM
g/pXAP9HLB2s+beBTK5iQU4/NfqmAVSl303QCoR9xLByo38vfAEAlLiRIh061pTi
PRlXVuY9bUQPyCSYsiBHv/fmLqdQdwU=
=ti6G
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event"
* tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf jevent: fix core dump on software events on s390
perf pmu: Ensure all alias variables are initialized
perf jevents metric: Fix type of strcmp_cpuid_str
perf trace: Avoid compile error wrt redefining bool
perf bpf-prologue: Remove unused file
tools headers UAPI: Update tools's copy of drm.h headers
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
I've changed employers, have company email that deals with patch-based
workflows without too much of a headache, and am trying to steer some
content out of my personal mail.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230925030647.40283-1-andrew@codeconstruct.com.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
The description for joel/aspeed.git on git.kernel.org currently says:
Old Aspeed tree. Please see joel/bmc.git
Let's update MAINTAINERS accordingly.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230922223405.24717-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
rbd_dev_refresh() has been holding header_rwsem across header and
parent info read-in unnecessarily for ages. With commit 870611e4877e
("rbd: get snapshot context after exclusive lock is ensured to be
held"), the potential for deadlocks became much more real owning to
a) header_rwsem now nesting inside lock_rwsem and b) rw_semaphores
not allowing new readers after a writer is registered.
For example, assuming that I/O request 1, I/O request 2 and header
read-in request all target the same OSD:
1. I/O request 1 comes in and gets submitted
2. watch error occurs
3. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and
releases lock_rwsem
4. after reestablishing the watch, rbd_reregister_watch() calls
rbd_dev_refresh() which takes header_rwsem for write and submits
a header read-in request
5. I/O request 2 comes in: after taking lock_rwsem for read in
__rbd_img_handle_request(), it blocks trying to take header_rwsem
for read in rbd_img_object_requests()
6. another watch error occurs
7. rbd_watch_errcb() blocks trying to take lock_rwsem for write
8. I/O request 1 completion is received by the messenger but can't be
processed because lock_rwsem won't be granted anymore
9. header read-in request completion can't be received, let alone
processed, because the messenger is stranded
Change rbd_dev_refresh() to take header_rwsem only for actually
updating rbd_dev->header. Header and parent info read-in don't need
any locking.
Cc: stable@vger.kernel.org # 0b035401c570: rbd: move rbd_dev_refresh() definition
Cc: stable@vger.kernel.org # 510a7330c82a: rbd: decouple header read-in from updating rbd_dev->header
Cc: stable@vger.kernel.org # c10311776f0a: rbd: decouple parent info read-in from updating rbd_dev
Cc: stable@vger.kernel.org
Fixes: 870611e4877e ("rbd: get snapshot context after exclusive lock is ensured to be held")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Unlike header read-in, parent info read-in is already decoupled in
get_parent_info(), but it's buried in rbd_dev_v2_parent_info() along
with the processing logic.
Separate the initial read-in and update read-in logic into
rbd_dev_setup_parent() and rbd_dev_update_parent() respectively and
have rbd_dev_v2_parent_info() just populate struct parent_image_info
(i.e. what get_parent_info() did). Some existing QoI issues, like
flatten of a standalone clone being disregarded on refresh, remain.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Make rbd_dev_header_info() populate a passed struct rbd_image_header
instead of rbd_dev->header and introduce rbd_dev_update_header() for
updating mutable fields in rbd_dev->header upon refresh. The initial
read-in of both mutable and immutable fields in rbd_dev_image_probe()
passes in rbd_dev->header so no update step is required there.
rbd_init_layout() is now called directly from rbd_dev_image_probe()
instead of individually in format 1 and format 2 implementations.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Move rbd_dev_refresh() definition further down to avoid having to
move struct parent_image_info definition in the next commit. This
spares some forward declarations too.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Drop one function parameter's kernel-doc comment since the parameter
was removed. This prevents a kernel-doc warning:
block/disk-events.c:300: warning: Excess function parameter 'events' description in 'disk_force_media_change'
Fixes: ab6860f62bfe ("block: simplify the disk_force_media_change interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202309060957.vfl0mUur-lkp@intel.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230926005232.23666-1-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As per the FF-A specification: section "Usage of other memory region
attributes", in a transaction to donate memory or lend memory to a single
borrower, if the receiver is a PE or Proxy endpoint, the owner must not
specify the attributes and the relayer will return INVALID_PARAMETERS
if the attributes are set.
Let us not set the memory region attributes for MEM_LEND.
Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND")
Reported-by: Joao Alves <joao.alves@arm.com>
Reported-by: Olivier Deprez <olivier.deprez@arm.com>
Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A szybot reproducer that does write I/O while truncating the size of a
block device can end up in clean_bdev_aliases, which tries to clean the
bdev aliases that it uses. This is because iomap_to_bh automatically
sets the BH_New flag when outside of i_size. For block devices updates
to i_size are racy and we can hit this case in a tiny race window,
leading to the eventual clean_bdev_aliases call. Fix this by erroring
out of > i_size I/O on block devices.
Reported-by: syzbot+1fa947e7f09e136925b8@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+1fa947e7f09e136925b8@syzkaller.appspotmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
It's not a good idea to be trying to send bug fixes to the mailing list
while also trying to take a vacation. Dave sent some review comments
about the iunlink reloading patches, I changed them in djwong-dev, and
forgot to backport those changes to my -fixes tree.
As a result, the patch is missing some important pieces. Perhaps
manually copying code diffs between email and two separate git trees
is archaic and stupid^W^W^W^Wisn't really a good idea?
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZRGoggAKCRBKO3ySh0YR
psMvAP9tA6UFIkHZXByGQiruto/sX/wC3xEq6qnYaRLvUk+5iQD/aDqbTNO+j3e4
oebBAl47Vs8zIV64sekQAE1TX8oTLAA=
=5NJF
-----END PGP SIGNATURE-----
Merge tag 'fix-fix-iunlink-6.6_2023-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-fixesB
xfs: fix reloading the last iunlink item
It's not a good idea to be trying to send bug fixes to the mailing list
while also trying to take a vacation. Dave sent some review comments
about the iunlink reloading patches, I changed them in djwong-dev, and
forgot to backport those changes to my -fixes tree.
As a result, the patch is missing some important pieces. Perhaps
manually copying code diffs between email and two separate git trees
is archaic and stupid^W^W^W^Wisn't really a good idea?
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'fix-fix-iunlink-6.6_2023-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: fix reloading entire unlinked bucket lists
Nathan reported that he was seeing the new warning in
setattr_copy_mgtime pop when starting podman containers. Overlayfs is
trying to set the atime and mtime via notify_change without also
setting the ctime.
POSIX states that when the atime and mtime are updated via utimes() that
we must also update the ctime to the current time. The situation with
overlayfs copy-up is analogies, so add ATTR_CTIME to the bitmask.
notify_change will fill in the value.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230913-ctime-v1-1-c6bc509cbc27@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
During ntfs_fill_super() some resources are allocated that we need to
cleanup in ->put_super() such as additional inodes. When
ntfs_fill_super() fails these resources need to be cleaned up as well.
Reported-by: syzbot+2751da923b5eb8307b0b@syzkaller.appspotmail.com
Fixes: 78a06688a4d4 ("ntfs3: drop inode references in ntfs_put_super()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
The imx25, imx50, imx51 and imx53 SPIs are compatible with the imx35.
Document them accordingly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230924183904.752415-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
acpi_video_bus_add_notify_handler() could free video->input and
set it to NULL on failure, but this failure would be missed in its
caller acpi_video_bus_add(). As a result, when an error happens in
acpi_dev_install_notify_handler(), acpi_video_bus_add() would call
acpi_video_bus_remove_notify_handler(), where a potential NULL pointer
video->input is dereferenced in input_unregister_device().
Fix this by adding a return value check and adjusting the following
error handling code.
Fixes: 6f7016819766 ("ACPI: video: Install Notify() handler directly")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
