IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
After sucessful decompressing, the buffer which pointed by 'buf' will be
lost as 'buf' is overwrite by 'big_oops_buf' and will never be freed.
Signed-off-by: Liu ShuoX <shuox.liu@intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Some pstore backing devices use on board flash as persistent
storage. These have limited numbers of write cycles so it
is a poor idea to use them from high frequency operations.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the messages indicating compression failure as it will
add to the space during panic path.
Reported-by: Seiji Aguchi <seiji.aguchi@hds.com>
Tested-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Since zlib_deflateInit2() is used for specifying window bit during compression,
zlib_inflateInit2() is appropriate for decompression.
Reported-by: Seiji Aguchi <seiji.aguchi@hds.com>
Tested-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
When backends (ex: efivars) have smaller registered buffers, the
big_oops_buf is too big for them as number of repeated occurences
in the text captured will be less. What happens is that pstore takes
too big a bite from the dmesg log and then finds it cannot compress it
enough to meet the backend block size. Patch takes care of adjusting
the buffer size based on the registered buffer size. cmpr values have
been arrived after doing experiments with plain text for buffers of
size 1k - 4k (Smaller the buffer size repeated occurence will be less)
and with sample crash log for buffers ranging from 4k - 10k.
Reported-by: Seiji Aguchi <seiji.aguchi@hds.com>
Tested-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
In case decompression fails, add a ".enc.z" to indicate the file has
compressed data. This will help user space utilities to figure
out the file contents.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Based on the flag 'compressed' set or not, pstore will decompress the
data returning a plain text file. If decompression fails for a particular
record it will have the compressed data in the file which can be
decompressed with 'openssl' command line tool.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Backends will set the flag 'compressed' after reading the log from
persistent store to indicate the data being returned to pstore is
compressed or not.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Add compression support to pstore which will help in capturing more data.
Initially, pstore will make a call to kmsg_dump with a bigger buffer
and will pass the size of bigger buffer to kmsg_dump and then compress
the data to registered buffer of registered size.
In case compression fails, pstore will capture the uncompressed
data by making a call again to kmsg_dump with registered_buffer
of registered size.
Pstore will indicate the data is compressed or not with a flag
in the write callback.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Addition of new argument 'compressed' in the write call back will
help the backend to know if the data passed from pstore is compressed
or not (In case where compression fails.). If compressed, the backend
can add a tag indicating the data is compressed while writing to
persistent store.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Pull powerpc updates from Ben Herrenschmidt:
"This is the powerpc changes for the 3.11 merge window. In addition to
the usual bug fixes and small updates, the main highlights are:
- Support for transparent huge pages by Aneesh Kumar for 64-bit
server processors. This allows the use of 16M pages as transparent
huge pages on kernels compiled with a 64K base page size.
- Base VFIO support for KVM on power by Alexey Kardashevskiy
- Wiring up of our nvram to the pstore infrastructure, including
putting compressed oopses in there by Aruna Balakrishnaiah
- Move, rework and improve our "EEH" (basically PCI error handling
and recovery) infrastructure. It is no longer specific to pseries
but is now usable by the new "powernv" platform as well (no
hypervisor) by Gavin Shan.
- I fixed some bugs in our math-emu instruction decoding and made it
usable to emulate some optional FP instructions on processors with
hard FP that lack them (such as fsqrt on Freescale embedded
processors).
- Support for Power8 "Event Based Branch" facility by Michael
Ellerman. This facility allows what is basically "userspace
interrupts" for performance monitor events.
- A bunch of Transactional Memory vs. Signals bug fixes and HW
breakpoint/watchpoint fixes by Michael Neuling.
And more ... I appologize in advance if I've failed to highlight
something that somebody deemed worth it."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
pstore: Add hsize argument in write_buf call of pstore_ftrace_call
powerpc/fsl: add MPIC timer wakeup support
powerpc/mpic: create mpic subsystem object
powerpc/mpic: add global timer support
powerpc/mpic: add irq_set_wake support
powerpc/85xx: enable coreint for all the 64bit boards
powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx
powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig
powerpc/mpic: Add get_version API both for internal and external use
powerpc: Handle both new style and old style reserve maps
powerpc/hw_brk: Fix off by one error when validating DAWR region end
powerpc/pseries: Support compression of oops text via pstore
powerpc/pseries: Re-organise the oops compression code
pstore: Pass header size in the pstore write callback
powerpc/powernv: Fix iommu initialization again
powerpc/pseries: Inform the hypervisor we are using EBB regs
powerpc/perf: Add power8 EBB support
powerpc/perf: Core EBB support for 64-bit book3s
powerpc/perf: Drop MMCRA from thread_struct
powerpc/perf: Don't enable if we have zero events
...
Header size is needed to distinguish between header and the dump data.
Incorporate the addition of new argument (hsize) in the pstore write
callback.
Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This is patch 1/3 of a patch set that avoids what misleadingly appears
to be a error during boot:
ERST: Could not register with persistent store
This message is displayed if the system has a valid ACPI ERST table and the
pstore.backend kernel parameter has been used to disable use of ERST by
pstore. But this same message is used for errors that preclude registration.
As part of fixing this, return a unique error status from pstore_register
if the pstore.backend kernel parameter selects a specific facility other
than the requesting facility and check for this condition before any others.
This allows the caller to distinquish this benign case from the other failure
cases.
Also, print an informational console message about which facility
successfully registered as the pstore backend. Since there are various
kernel parameters, config build options, and boot-time errors that can
influence which facility registers with pstore, it's useful to have a
positive indication.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reported-by: Naotaka Hamaguchi <n.hamaguchi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
[Issue]
When pstore is in panic and emergency-restart paths, it may be blocked
in those paths because it simply takes spin_lock.
This is an example scenario which pstore may hang up in a panic path:
- cpuA grabs psinfo->buf_lock
- cpuB panics and calls smp_send_stop
- smp_send_stop sends IRQ to cpuA
- after 1 second, cpuB gives up on cpuA and sends an NMI instead
- cpuA is now in an NMI handler while still holding buf_lock
- cpuB is deadlocked
This case may happen if a firmware has a bug and
cpuA is stuck talking with it more than one second.
Also, this is a similar scenario in an emergency-restart path:
- cpuA grabs psinfo->buf_lock and stucks in a firmware
- cpuB kicks emergency-restart via either sysrq-b or hangcheck timer.
And then, cpuB is deadlocked by taking psinfo->buf_lock again.
[Solution]
This patch avoids the deadlocking issues in both panic and emergency_restart
paths by introducing a function, is_non_blocking_path(), to check if a cpu
can be blocked in current path.
With this patch, pstore is not blocked even if another cpu has
taken a spin_lock, in those paths by changing from spin_lock_irqsave
to spin_trylock_irqsave.
In addition, according to a comment of emergency_restart() in kernel/sys.c,
spin_lock shouldn't be taken in an emergency_restart path to avoid
deadlock. This patch fits the comment below.
<snip>
/**
* emergency_restart - reboot the system
*
* Without shutting down any hardware or taking any locks
* reboot the system. This is called when we know we are in
* trouble so this is our best effort to reboot. This is
* safe to call in interrupt context.
*/
void emergency_restart(void)
<snip>
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
[Issue]
Currently, a variable name, which identifies each entry, consists of type, id and ctime.
But if multiple events happens in a short time, a second/third event may fail to log because
efi_pstore can't distinguish each event with current variable name.
[Solution]
A reasonable way to identify all events precisely is introducing a sequence counter to
the variable name.
The sequence counter has already supported in a pstore layer with "oopscount".
So, this patch adds it to a variable name.
Also, it is passed to read/erase callbacks of platform drivers in accordance with
the modification of the variable name.
<before applying this patch>
a variable name of first event: dump-type0-1-12345678
a variable name of second event: dump-type0-1-12345678
type:0
id:1
ctime:12345678
If multiple events happen in a short time, efi_pstore can't distinguish them because
variable names are same among them.
<after applying this patch>
it can be distinguishable by adding a sequence counter as follows.
a variable name of first event: dump-type0-1-1-12345678
a variable name of Second event: dump-type0-1-2-12345678
type:0
id:1
sequence counter: 1(first event), 2(second event)
ctime:12345678
In case of a write callback executed in pstore_console_write(), "0" is added to
an argument of the write callback because it just logs all kernel messages and
doesn't need to care about multiple events.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Passing a NULL id causes a NULL pointer deference in writers such as
erst_writer and efi_pstore_write because they expect to update this id.
Pass a dummy id instead.
This avoids a cascade of oopses caused when the initial
pstore_console_write passes a null which in turn causes writes to the
console causing further oopses in subsequent pstore_console_write calls.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Like 8250 driver, when pstore is registered as a console,
to avoid recursive spinlocks when panic happening, change the
spin_lock_irqsave to spin_trylock_irqsave when oops_in_progress
is true.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
With this patch we no longer reuse function tracer infrastructure, now
we register our own tracer back-end via a debugfs knob.
It's a bit more code, but that is the only downside. On the bright side we
have:
- Ability to make persistent_ram module removable (when needed, we can
move ftrace_ops struct into a module). Note that persistent_ram is still
not removable for other reasons, but with this patch it's just one
thing less to worry about;
- Pstore part is more isolated from the generic function tracer. We tried
it already by registering our own tracer in available_tracers, but that
way we're loosing ability to see the traces while we record them to
pstore. This solution is somewhere in the middle: we only register
"internal ftracer" back-end, but not the "front-end";
- When there is only pstore tracing enabled, the kernel will only write
to the pstore buffer, omitting function tracer buffer (which, of course,
still can be enabled via 'echo function > current_tracer').
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
With this support kernel can save function call chain log into a
persistent ram buffer that can be decoded and dumped after reboot
through pstore filesystem. It can be used to determine what function
was last called before a reset or panic.
We store the log in a binary format and then decode it at read time.
p.s.
Mostly the code comes from trace_persistent.c driver found in the
Android git tree, written by Colin Cross <ccross@android.com>
(according to sign-off history). I reworked the driver a little bit,
and ported it to pstore.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For function tracing we need to stop using pstore.buf directly, since
in a tracing callback we can't use spinlocks, and thus we can't safely
use the global buffer.
With write_buf callback, backends no longer need to access pstore.buf
directly, and thus we can pass any buffers (e.g. allocated on stack).
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This picks up the staging changes made in 3.5-rc4 so that everyone can sync up
properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide an iterator to receive the log buffer content, and convert all
kmsg_dump() users to it.
The structured data in the kmsg buffer now contains binary data, which
should no longer be copied verbatim to the kmsg_dump() users.
The iterator should provide reliable access to the buffer data, and also
supports proper log line-aware chunking of data while iterating.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having automatic updates seems pointless for production system, and
even dangerous and thus counter-productive:
1. If we can mount pstore, or read files, we can as well read
/proc/kmsg. So, there's little point in duplicating the
functionality and present the same information but via another
userland ABI;
2. Expecting the kernel to behave sanely after oops/panic is naive.
It might work, but you'd rather not try it. Screwed up kernel
can do rather bad things, like recursive faults[1]; and pstore
rather provoking bad things to happen. It uses:
1. Timers (assumes sane interrupts state);
2. Workqueues and mutexes (assumes scheduler in a sane state);
3. kzalloc (a working slab allocator);
That's too much for a dead kernel, so the debugging facility
itself might just make debugging harder, which is not what
we want.
Maybe for non-oops message types it would make sense to re-enable
automatic updates, but so far I don't see any use case for this.
Even for tracing, it has its own run-time/normal ABI, so we're
only interested in pstore upon next boot, to retrieve what has
gone wrong with HW or SW.
So, let's disable the updates by default.
[1]
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff8104801b>] kthread_data+0xb/0x20
[...]
Process kworker/0:1 (pid: 14, threadinfo ffff8800072c0000, task ffff88000725b100)
[...
Call Trace:
[<ffffffff81043710>] wq_worker_sleeping+0x10/0xa0
[<ffffffff813687a8>] __schedule+0x568/0x7d0
[<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81087e22>] ? call_rcu_sched+0x12/0x20
[<ffffffff8102b596>] ? release_task+0x156/0x2d0
[<ffffffff8102b45e>] ? release_task+0x1e/0x2d0
[<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81368ac4>] schedule+0x24/0x70
[<ffffffff8102cba8>] do_exit+0x1f8/0x370
[<ffffffff810051e7>] oops_end+0x77/0xb0
[<ffffffff8135c301>] no_context+0x1a6/0x1b5
[<ffffffff8135c4de>] __bad_area_nosemaphore+0x1ce/0x1ed
[<ffffffff81053156>] ? ttwu_queue+0xc6/0xe0
[<ffffffff8135c50b>] bad_area_nosemaphore+0xe/0x10
[<ffffffff8101fa47>] do_page_fault+0x2c7/0x450
[<ffffffff8106e34b>] ? __lock_release+0x6b/0xe0
[<ffffffff8106bf21>] ? mark_held_locks+0x61/0x140
[<ffffffff810502fe>] ? __wake_up+0x4e/0x70
[<ffffffff81185f7d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
[<ffffffff81158970>] ? pstore_register+0x120/0x120
[<ffffffff8136a37f>] page_fault+0x1f/0x30
[<ffffffff81158970>] ? pstore_register+0x120/0x120
[<ffffffff81185ab8>] ? memcpy+0x68/0x110
[<ffffffff8115875a>] ? pstore_get_records+0x3a/0x130
[<ffffffff811590f4>] ? persistent_ram_copy_old+0x64/0x90
[<ffffffff81158bf4>] ramoops_pstore_read+0x84/0x130
[<ffffffff81158799>] pstore_get_records+0x79/0x130
[<ffffffff81042536>] ? process_one_work+0x116/0x450
[<ffffffff81158970>] ? pstore_register+0x120/0x120
[<ffffffff8115897e>] pstore_dowork+0xe/0x10
[<ffffffff81042594>] process_one_work+0x174/0x450
[<ffffffff81042536>] ? process_one_work+0x116/0x450
[<ffffffff81042e13>] worker_thread+0x123/0x2d0
[<ffffffff81042cf0>] ? manage_workers.isra.28+0x120/0x120
[<ffffffff81047d8e>] kthread+0x8e/0xa0
[<ffffffff8136ba74>] kernel_thread_helper+0x4/0x10
[<ffffffff8136a199>] ? retint_restore_args+0xe/0xe
[<ffffffff81047d00>] ? __init_kthread_worker+0x70/0x70
[<ffffffff8136ba70>] ? gs_change+0xb/0xb
Code: be e2 00 00 00 48 c7 c7 d1 2a 4e 81 e8 bf fb fd ff 48 8b 5d f0 4c 8b 65 f8 c9 c3 0f 1f 44 00 00 48 8b 87 08 02 00 00 55 48 89 e5 <48> 8b 40 f8 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
RIP [<ffffffff8104801b>] kthread_data+0xb/0x20
RSP <ffff8800072c1888>
CR2: fffffffffffffff8
---[ end trace 996a332dc399111d ]---
Fixing recursive fault but reboot is needed!
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no behavioural change, the default value is still 60 seconds.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pstore doesn't support logging kernel messages in run-time, it only
dumps dmesg when kernel oopses/panics. This makes pstore useless for
debugging hangs caused by HW issues or improper use of HW (e.g.
weird device inserted -> driver tried to write a reserved bits ->
SoC hanged. In that case we don't get any messages in the pstore.
Therefore, let's add a runtime logging support: PSTORE_TYPE_CONSOLE.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a pstore backend doesn't want to support various portions of the
pstore interface, it can just leave those functions NULL instead of
creating no-op stubs.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This allows a backend to filter on the dmesg reason as well as the pstore
reason. When ramoops is switched to pstore, this is needed since it has
no interest in storing non-crash dmesg details.
Drop pstore_write() as it has no users, and handling the "reason" here
has no obviously correct value.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The buf_lock cannot be held while populating the inodes, so make the backend
pass forward an allocated and filled buffer instead. This solves the following
backtrace. The effect is that "buf" is only ever used to notify the backends
that something was written to it, and shouldn't be used in the read path.
To replace the buf_lock during the read path, isolate the open/read/close
loop with a separate mutex to maintain serialized access to the backend.
Note that is is up to the pstore backend to cope if the (*write)() path is
called in the middle of the read path.
[ 59.691019] BUG: sleeping function called from invalid context at .../mm/slub.c:847
[ 59.691019] in_atomic(): 0, irqs_disabled(): 1, pid: 1819, name: mount
[ 59.691019] Pid: 1819, comm: mount Not tainted 3.0.8 #1
[ 59.691019] Call Trace:
[ 59.691019] [<810252d5>] __might_sleep+0xc3/0xca
[ 59.691019] [<810a26e6>] kmem_cache_alloc+0x32/0xf3
[ 59.691019] [<810b53ac>] ? __d_lookup_rcu+0x6f/0xf4
[ 59.691019] [<810b68b1>] alloc_inode+0x2a/0x64
[ 59.691019] [<810b6903>] new_inode+0x18/0x43
[ 59.691019] [<81142447>] pstore_get_inode.isra.1+0x11/0x98
[ 59.691019] [<81142623>] pstore_mkfile+0xae/0x26f
[ 59.691019] [<810a2a66>] ? kmem_cache_free+0x19/0xb1
[ 59.691019] [<8116c821>] ? ida_get_new_above+0x140/0x158
[ 59.691019] [<811708ea>] ? __init_rwsem+0x1e/0x2c
[ 59.691019] [<810b67e8>] ? inode_init_always+0x111/0x1b0
[ 59.691019] [<8102127e>] ? should_resched+0xd/0x27
[ 59.691019] [<8137977f>] ? _cond_resched+0xd/0x21
[ 59.691019] [<81142abf>] pstore_get_records+0x52/0xa7
[ 59.691019] [<8114254b>] pstore_fill_super+0x7d/0x91
[ 59.691019] [<810a7ff5>] mount_single+0x46/0x82
[ 59.691019] [<8114231a>] pstore_mount+0x15/0x17
[ 59.691019] [<811424ce>] ? pstore_get_inode.isra.1+0x98/0x98
[ 59.691019] [<810a8199>] mount_fs+0x5a/0x12d
[ 59.691019] [<810b9174>] ? alloc_vfsmnt+0xa4/0x14a
[ 59.691019] [<810b9474>] vfs_kern_mount+0x4f/0x7d
[ 59.691019] [<810b9d7e>] do_kern_mount+0x34/0xb2
[ 59.691019] [<810bb15f>] do_mount+0x5fc/0x64a
[ 59.691019] [<810912fb>] ? strndup_user+0x2e/0x3f
[ 59.691019] [<810bb3cb>] sys_mount+0x66/0x99
[ 59.691019] [<8137b537>] sysenter_do_call+0x12/0x26
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Currently pstore write interface employs record id as return
value, but it is not enough because it can't tell caller if
the write operation is successful. Pass the record id back via
an argument pointer and return zero for success, non-zero for
failure.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
pstore was using mutex locking to protect read/write access to the
backend plug-ins. This causes problems when pstore is executed in
an NMI context through panic() -> kmsg_dump().
This patch changes the mutex to a spin_lock_irqsave then also checks to
see if we are in an NMI context. If we are in an NMI and can't get the
lock, just print a message stating that and blow by the locking.
All this is probably a hack around the bigger locking problem but it
solves my current situation of trying to sleep in an NMI context.
Tested by loading the lkdtm module and executing a HARDLOCKUP which
will cause the machine to panic inside the nmi handler.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Life is simple for all the kernel terminating types of kmsg_dump
call backs - pstore just saves the tail end of the console log. But
for "oops" the situation is more complex - the kernel may carry on
running (possibly for ever). So we'd like to make the logged copy
of the oops appear in the pstore filesystem - so that the user has
a handle to clear the entry from the persistent backing store (if
we don't, the store may fill with "oops" entries (that are also
safely stashed in /var/log/messages) leaving no space for real
errors.
Current code calls pstore_mkfile() immediately. But this may
not be safe. The oops could have happened with arbitrary locks
held, or in interrupt or NMI context. So allocating memory and
calling into generic filesystem code seems unwise.
This patch defers making the entry appear. At the time
of the oops, we merely set a flag "pstore_new_entry" noting that
a new entry has been added. A periodic timer checks once a minute
to see if the flag is set - if so, it schedules a work queue to
rescan the backing store and make all new entries appear in the
pstore filesystem.
Signed-off-by: Tony Luck <tony.luck@intel.com>
pstore only allows one backend to be registered at present, but the
system may provide several. Add a parameter to allow the user to choose
which backend will be used rather than just relying on load order.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
We'll never have a negative part, so just make this an unsigned int.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
EFI only provides small amounts of individual storage, and conventionally
puts metadata in the storage variable name. Rather than add a metadata
header to the (already limited) variable storage, it's easier for us to
modify pstore to pass all the information we need to construct a unique
variable name to the appropriate functions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Some pstore implementations may not have a static context, so extend the
API to pass the pstore_info struct to all calls and allow for a context
pointer.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Currently after mount/remount operation on pstore filesystem,
the content on pstore will be lost. It is because current ERST
implementation doesn't support multi-user usage, which moves
internal pointer to the end after accessing it. Adding
multi-user support for pstore usage.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
the return type of function _read_ in pstore is size_t,
but in the callback function of _read_, the logic doesn't
consider it too much, which means if negative value (assuming
error here) is returned, it will be converted to positive because
of type casting. ssize_t is enough for this function.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
pstore_dump() can be called with many different "reason" codes. Save
the name of the code in the persistent store record.
Also - only worthwhile calling pstore_mkfile for KMSG_DUMP_OOPS - that
is the only one where the kernel will continue running.
Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
/sys/fs is a somewhat strange way to tweak what could more
obviously be tuned with a mount option.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some platforms have a small amount of non-volatile storage that
can be used to store information useful to diagnose the cause of
a system crash. This is the generic part of a file system interface
that presents information from the crash as a series of files in
/dev/pstore. Once the information has been seen, the underlying
storage is freed by deleting the files.
Signed-off-by: Tony Luck <tony.luck@intel.com>
