IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 804951203a ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").
Fixes: 804951203a ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 9745fb0747 ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
asm-generic/posix-types.h is obtained through bioscfg.h so there is no
need to include it. It is also an asm-generic file which should be
avoided if possible.
Suggest-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231219-hp-password-v1-1-052fe7b6b7f1@google.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The ACPI LPSS driver and the Surface platform driver code use almost the
same code pattern for checking if one ACPI device is present in the list
returned by _DEP for another ACPI device.
To reduce the resulting code duplication, introduce a helper for that
called acpi_device_dep() and invoke it from both places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If PMC discovery using pmc_core_ssram_init() was unsuccessful for the
Meteor Lake platform, the legacy enumeration method is used. In this
case pci device struct for the PMC SSRAM is not available
and pmc_core_ssram_get_lpm_reqs() will not work. Add ssram_init flag to
indicate if the PMC SSRAM initialization was successful or not. Call
pmc_core_ssram_get_lpm_reqs() only if the ssram_init flag is set to true.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-6-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Functions like mtl_set_device_d3() and mtl_punit_pmt_init() were added for
Meteor Lake. To be able to use them in Arrow Lake and future platforms,
move them to core.c.
Also, to support different guids, add guid argument in
pmc_core_punit_pmt_init() and to support different PCI function numbers,
add func arg in pmc_core_ssram_init().
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-5-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add PSON register offsets for Alder Lake PCH that provides an access to
PSON residency counter.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-4-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tiger Lake H PCH is same as Tiger Lake LP PCH from the driver
perspective with the addition of the PSON residency counter. Add regmap
for TGP H to add PSON register offsets for Tiger Lake H PCH.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-3-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tiger Lake platform onwards, devices have the capability to track the
duration of time that their Power Supply Units (PSUs) are turned off
during S0ix. This patch adds a debugfs file `pson_residency_usec` to
provide access to this counter.
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-2-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
pci_get_domain_bus_and_slot() increases the reference count on the pci
device that is used to register the endpoint. In case of failure in
registration, decrease reference count using pci_dev_put(pcidev) before
returning.
Fixes: 6e79648553 ("platform/x86/intel/pmc: Show Die C6 counter on Meteor Lake")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-1-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
All callers who call get_subobj_info() with **info being NULL
should better use acpi_has_method() instead.
Convert the only caller who does this to acpi_has_method()
to drop the dummy info handling.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-7-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, the ACPI notify handler searches all WMI devices for
a matching WMI event device. This is inefficient since only WMI devices
associated with the notified ACPI device need to be searched.
Use the WMI bus device and device_for_each_child() to search for
a matching WMI event device instead.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-6-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Create the WMI bus device first so that it can be used
by the ACPI handlers.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-5-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use devres for cleaning up the ACPI handlers and the
WMI bus device to simplify the error handling.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-4-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When removing the ACPI notify/address space handlers, the WMI devices
are still active and might still depend on ACPI EC access or
WMI events.
Fix this by removing the ACPI handlers after all WMI devices
associated with an ACPI device have been removed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The variable "i" is always zero and only used in shift operations.
Remove it to make the code more readable.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-2-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Passing PMC_IDX_MAIN in pmc_core_pmc_add() adds only primary pmc to pmcdev.
Use pmc_idx instead to add all available pmcs.
Fixes: a01486dc4b ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011702.1976408-1-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Lunar Lake M PMT telemetry support.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216005146.1735455-1-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231215112746.13752-1-colin.i.king@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
Cc: Kieran Levin <ktl@framework.net>
Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/zephyr/program/lotus/azalea/src/power_sequence.c#L313 [1]
Link: https://community.frame.work/t/amd-wont-sleep-properly/41755
Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-wakeup-behavior-feedback/39128
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-5-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future. Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The platform defines will be used by the quirks in the future,
so move them to the common header to allow use by both source
files.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.
Fixes: 2bcef45292 ("platform/x86:intel/pmc: Enable debugfs multiple PMC support")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011650.1973941-1-rajvi.jingar@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Sometimes policy binary retrieved from the BIOS maybe incorrect that can
end up in failing to enable the Smart PC solution feature.
Use print_hex_dump_debug() to dump the policy binary in hex, so that we
debug the issues related to the binary even before sending that to TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-13-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A policy binary is OS agnostic, and the same policies are expected to work
across the OSes. At times it becomes difficult to debug when the policies
inside the policy binaries starts to misbehave. Add a way to sideload such
policies independently to debug them via a debugfs entry.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-12-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver sends constant inputs to TA which its gets via the other
subsystems in the kernel. To debug certain TA issues knowing what inputs
being sent to TA becomes critical. Add debug facility to the driver which
can isolate Smart PC and TA related issues.
Also, make source_as_str() as non-static function as this helper is
required outside of sps.c file.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add amd_pmf prefix to source_as_str() function, so that the function name
does not look generic. As this is a helper function make it as non-static
so that it can be reused across multiple PMF features.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-10-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver based on the output actions from the TA can request to update
the system states like entering s0i3, lock screen etc. by generating
an uevent. Based on the udev rules set in the userspace the event id
matching the uevent shall get updated accordingly using the systemctl.
Sample udev rules under Documentation/admin-guide/pmf.rst.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
P3T (Peak Package Power Limit) is a metric within the SMU controller
that can influence the power limits. Add support from the driver
to update P3T limits accordingly.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver sends changing inputs from each subystem to TA for evaluating
the conditions in the policy binary.
Add initial support of plumbing in the PMF driver for Smart PC to get
information from other subsystems in the kernel.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To sideload pmf policy binaries, the Smart PC Solution Builder provides a
debugfs file called "update_policy"; that gets created under a new debugfs
directory called "pb" and this new directory has to be associated with
existing parent directory for PMF driver called "amd_pmf".
In the current code structure, amd_pmf_dbgfs_register() is called after
amd_pmf_init_features(). This will not help when the Smart PC builder
feature has to be assoicated to the parent directory.
Hence change the order of amd_pmf_dbgfs_register() and call it before
amd_pmf_init_features() so that when the Smart PC init happens, it has the
parent debugfs directory to get itself hooked.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF Policy binary is a encrypted and signed binary that will be part
of the BIOS. PMF driver via the ACPI interface checks the existence
of Smart PC bit. If the advertised bit is found, PMF driver walks
the acpi namespace to find out the policy binary size and the address
which has to be passed to the TA during the TA init sequence.
The policy binary is comprised of inputs (or the events) and outputs
(or the actions). With the PMF ecosystem, OEMs generate the policy
binary (or could be multiple binaries) that contains a supported set
of inputs and outputs which could be specifically carved out for each
usage segment (or for each user also) that could influence the system
behavior either by enriching the user experience or/and boost/throttle
power limits.
Once the TA init command succeeds, the PMF driver sends the changing
events in the current environment to the TA for a constant sampling
frequency time (the event here could be a lid close or open) and
if the policy binary has corresponding action built within it, the
TA sends the action for it in the subsequent enact command.
If the inputs sent to the TA has no output defined in the policy
binary generated by OEMs, there will be no action to be performed
by the PMF driver.
Example policies:
1) if slider is performance ; set the SPL to 40W
Here PMF driver registers with the platform profile interface and
when the slider position is changed, PMF driver lets the TA know
about this. TA sends back an action to update the Sustained
Power Limit (SPL). PMF driver updates this limit via the PMFW mailbox.
2) if user_away ; then lock the system
Here PMF driver hooks to the AMD SFH driver to know the user presence
and send the inputs to TA and if the condition is met, the TA sends
the action of locking the system. PMF driver generates a uevent and
based on the udev rule in the userland the system gets locked with
systemctl.
The intent here is to provide the OEM's to make a policy to lock the
system when the user is away ; but the userland can make a choice to
ignore it.
The OEMs will have an utility to create numerous such policies and
the policies shall be reviewed by AMD before signing and encrypting
them. Policies are shared between operating systems to have seemless user
experience.
Since all this action has to happen via the "amdtee" driver, currently
there is no caller for it in the kernel which can load the amdtee driver.
Without amdtee driver loading onto the system the "tee" calls shall fail
from the PMF driver. Hence an explicit MODULE_SOFTDEP has been added
to address this.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the current code, the metrics table information was required only
for auto-mode or CnQF at a given time. Hence keeping the return type
of amd_pmf_set_dram_addr() as static made sense.
But with the addition of Smart PC builder feature, the metrics table
information has to be shared by the Smart PC also and this feature
resides outside of core.c.
To make amd_pmf_set_dram_addr() visible outside of core.c make it
as a non-static function and move the allocation of memory for
metrics table from amd_pmf_init_metrics_table() to amd_pmf_set_dram_addr()
as amd_pmf_set_dram_addr() is the common function to set the DRAM
address.
Add a suspend handler that can free up the allocated memory for getting
the metrics table information.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF TA (Trusted Application) loads via the TEE environment into the
AMD ASP.
PMF-TA supports two commands:
1) Init: Initialize the TA with the PMF Smart PC policy binary and
start the policy engine. A policy is a combination of inputs and
outputs, where;
- the inputs are the changing dynamics of the system like the user
behaviour, system heuristics etc.
- the outputs, which are the actions to be set on the system which
lead to better power management and enhanced user experience.
PMF driver acts as a central manager in this case to supply the
inputs required to the TA (either by getting the information from
the other kernel subsystems or from userland)
2) Enact: Enact the output actions from the TA. The action could be
applying a new thermal limit to boost/throttle the power limits or
change system behavior.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
AMD PMF driver loads the PMF TA (Trusted Application) into the AMD
ASP's (AMD Security Processor) TEE (Trusted Execution Environment).
PMF Trusted Application is a secured firmware placed under
/lib/firmware/amdtee gets loaded only when the TEE environment is
initialized. Add the initial code path to build these pipes.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As stated in the changelog for the commit 7b458a4c5d ("usb: typec: Add
typec_port_register_altmodes()"), the code should be adjusted according
to the AltMode bindings. As the SVID is 16 bits wide (according to the
USB PD Spec), use fwnode_property_read_u16() to read it.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231204020303.2287338-3-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are only 4 users of acpi_evaluate_reference() and none of them
actually cares about the reason why it fails. All of them are only
interested in whether or not it is successful, so it can return a bool
value indicating that.
Modify acpi_evaluate_reference() as per the observation above and update
its callers accordingly so as to get rid of useless code and local
variables.
The observable behavior of the kernel is not expected to change after
this modification of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
GCC-13 (and Clang) does not like having a partially allocated object,
since it cannot reason about it for bounds checking.
Notice that the compiler is legitimately complaining about accessing
an object (params, in this case) for which not enough memory was
allocated.
The object is of size 20 bytes:
struct ec_params_vbnvcontext {
uint32_t op; /* 0 4 */
uint8_t block[16]; /* 4 16 */
/* size: 20, cachelines: 1, members: 2 */
/* last cacheline: 20 bytes */
};
but only 16 bytes are allocated:
sizeof(struct ec_response_vbnvcontext) == 16
In this case, as only enough space for the op field is allocated,
we can use an object of type uint32_t instead of a whole
struct ec_params_vbnvcontext (for which not enough memory is
allocated).
Fix the following warning seen under GCC 13:
drivers/platform/chrome/cros_ec_vbc.c: In function ‘vboot_context_read’:
drivers/platform/chrome/cros_ec_vbc.c:36:15: warning: array subscript ‘struct ec_params_vbnvcontext[1]’ is partly outside array bounds of ‘unsigned char[36]’ [-Warray-bounds=]
36 | params->op = EC_VBNV_CONTEXT_OP_READ;
| ^~
In file included from drivers/platform/chrome/cros_ec_vbc.c:12:
In function ‘kmalloc’,
inlined from ‘vboot_context_read’ at drivers/platform/chrome/cros_ec_vbc.c:30:8:
./include/linux/slab.h:580:24: note: at offset 20 into object of size 36 allocated by ‘kmalloc_trace’
580 | return kmalloc_trace(
| ^~~~~~~~~~~~~~
581 | kmalloc_caches[kmalloc_type(flags)][index],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
582 | flags, size);
| ~~~~~~~~~~~~
Link: https://github.com/KSPP/linux/issues/278
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZCTrutoN+9TiJM8u@work
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support
for merging into the wifi subsys and amdgpu driver for 6.8.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmV26S0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xhrggAndnZ23OehAMs+Tl5usEm/9RE6Al2
M9i/P3s2uzBUg4cRTAY0BLsNHIg9zvLv8unrJ0xoPQuoV/vI0864PMLQ1miVyvIa
V99/Cz/eCH0wZp9ADE1dL7EYI76aj5TXGgAxExTJ3EKVg5j/jWMkLLrsMZNT/23Z
YDPcDEPpaAGaKmJf0sJd+TRMn5hyJCVmkre9CEXJGDaogsX0BJGIhJ3nA2GzAwQ+
1oMxlkzMoECQ3U5ilzRtdREvmZtO1mjwUmwGMDZBKGwEvm0B8CrxDGmQjjMJcqTW
a85EeS/C3q+U7Pexq6/Wkixmv2pIuNzbQ1SV0P+qky8lPd6Rzp2fSmnnOg==
=UXod
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into review-hans
Immutable branch between pdx86 amd wbrf branch and wifi / amdgpu due for the v6.8 merge window
platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support
for merging into the wifi subsys and amdgpu driver for 6.8.
Some Dell machines like the Dell Optiplex 7000 do not support
the legacy SMM interface, but instead expect all SMM calls
to be issued over a special WMI interface.
Add support for this interface so users can control the fans
on those machines.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-8-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Due to electrical and mechanical constraints in certain platform designs
there may be likely interference of relatively high-powered harmonics of
the (G-)DDR memory clocks with local radio module frequency bands used
by Wifi 6/6e/7.
To mitigate this, AMD has introduced a mechanism that devices can use to
notify active use of particular frequencies so that other devices can make
relative internal adjustments as necessary to avoid this resonance.
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The design of the WMI chardev interface is broken:
- it assumes that WMI drivers are not instantiated twice
- it offers next to no abstractions, the WMI driver gets
a raw byte buffer
- it is only used by a single driver, something which is
unlikely to change
Since the only user (dell-smbios-wmi) has been migrated
to his own ioctl interface, remove it.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231210202443.646427-6-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The WMI chardev API will be removed in the near future.
Reimplement the necessary bits used by this driver so
that userspace software depending on it does no break.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231210202443.646427-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use devres version of __get_free_pages() to simplify the
error handling code.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231210202443.646427-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Users can already listen to ACPI WMI events through
the ACPI netlink interface. The old wmi_notify_debug()
interface also uses the deprecated GUID-based interface.
Remove it to make the event handling code more readable.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231210202443.646427-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The functionality of dumping WDG entries is better provided by
userspace tools like "fwts wmi", which also does not suffer from
garbled printk output caused by pr_cont().
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231210202443.646427-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZXC60QAKCRBZrE9hU+XO
McbwAPwIlGYIdYzUXGVGCrCBq7wtBR8ADfFqIa42hUlkDyZ4tAEA8LgrZutAFwhq
35kVk6FSwrUGuIhX5TkxTxnp814nzwE=
=iiB1
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next
Back merge pdx86 fixes into pdx86/for-next for further WMI work
depending on some of the fixes.
platform-drivers-x86 for v6.7-3
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
When a feature is read blocked, don't continue to read uncore information
and register with uncore core.
When the feature is write blocked, continue to offer read interface but
block setting uncore limits.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231204221740.3645130-6-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a feature is read blocked, don't continue to read SST information
and register with SST core.
When the feature is write blocked, continue to offer read interface for
SST parameters, but don't allow any operation to change state. A state
change results from SST level change, feature change or class of service
change.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231204221740.3645130-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move TPMI ID definitions to common include file. In this way other
feature drivers don't have to redefine.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231204221740.3645130-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Modify the external interface tpmi_get_feature_status() to get read
and write blocked instead of locked and disabled. Since auxiliary device
is not created when disabled, no use of returning disabled state. Also
locked state is not useful as feature driver can't use locked state
in a meaningful way.
Using read and write state, feature driver can decide which operations
to restrict for that feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231204221740.3645130-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If some TPMI features are disabled, don't create auxiliary devices. In
this way feature drivers will not load.
While creating auxiliary devices, call tpmi_read_feature_status() to
check feature state and return if the feature is disabled without
creating a device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231204221740.3645130-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a6b074b7ee37f3682da4b3f39ea40af97add64c2.1701726190.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/639b9ffc18422fe59125893bd7909e8a73cffb72.1701726190.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
These four functions are exported, but don't have any users, and no
prototypes, which now causes warnings:
drivers/platform/mips/rs780e-acpi.c:35:6: error: no previous prototype for 'pm_iowrite' [-Werror=missing-prototypes]
drivers/platform/mips/rs780e-acpi.c:41:4: error: no previous prototype for 'pm_ioread' [-Werror=missing-prototypes]
drivers/platform/mips/rs780e-acpi.c:47:6: error: no previous prototype for 'pm2_iowrite' [-Werror=missing-prototypes]
drivers/platform/mips/rs780e-acpi.c:53:4: error: no previous prototype for 'pm2_ioread' [-Werror=missing-prototypes]
Link: https://lkml.kernel.org/r/20231204115710.2247097-5-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@rothwell.id.au>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix kernel-doc function notation and comment formatting to prevent
warnings from scripts/kernel-doc.
for drivers/platform/x86/intel_ips.c:
595: warning: No description found for return value of 'mcp_exceeded'
624: warning: No description found for return value of 'cpu_exceeded'
650: warning: No description found for return value of 'mch_exceeded'
745: warning: bad line: cpu+ gpu+ cpu+gpu- cpu-gpu+ cpu-gpu-
746: warning: bad line: cpu < gpu < cpu+gpu+ cpu+ gpu+ nothing
753: warning: No description found for return value of 'ips_adjust'
747: warning: bad line: cpu < gpu >= cpu+gpu-(mcp<) cpu+gpu-(mcp<) gpu- gpu-
748: warning: bad line: cpu >= gpu < cpu-gpu+(mcp<) cpu- cpu-gpu+(mcp<) cpu-
749: warning: bad line: cpu >= gpu >= cpu-gpu- cpu-gpu- cpu-gpu- cpu-gpu-
945: warning: No description found for return value of 'ips_monitor'
1151: warning: No description found for return value of 'ips_irq_handler'
1301: warning: Function parameter or member 'ips' not described in 'ips_detect_cpu'
1302: warning: No description found for return value of 'ips_detect_cpu'
1358: warning: No description found for return value of 'ips_get_i915_syms'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20231206060120.4816-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.
This patch converts struct serdev_device_ops hooks and its
instantiations.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a function's return description and don't misuse "/**" for
non-kernel-doc comments to prevent warnings from scripts/kernel-doc.
thinkpad_acpi.c:523: warning: No description found for return value of 'tpacpi_check_quirks'
thinkpad_acpi.c:9307: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
thinkpad_acpi.c:9307: warning: missing initial short description on line:
* This evaluates a ACPI method call specific to the battery
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
CC: ibm-acpi-devel@lists.sourceforge.net
CC: platform-driver-x86@vger.kernel.org
Reviewed-by: mpearson-lenovo@squebb.ca
Link: https://lore.kernel.org/r/20231206060144.8260-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2 issues have been reported on the Dell Inspiron 7352:
1. Sometimes the tablet-mode-switch stops reporting tablet-mode
change events.
Add a "VBDL" call to notify_handler() to work around this.
2. Sometimes the tablet-mode is incorrect after suspend/resume
Add a detect_tablet_mode() to resume() to fix this.
Reported-by: Arnold Gozum <arngozum@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/87271a74-c831-4eec-b7a4-1371d0e42471@gmail.com/
Tested-by: Arnold Gozum <arngozum@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20231204150601.46976-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The spi_new_device() function returns NULL on error, it doesn't return
error pointers.
Fixes: 70505ea6de ("platform/x86: x86-android-tablets: Add support for SPI device instantiation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/4b1b2395-c7c5-44a4-b0b0-6d091c7f46a2@moroto.mountain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a "die_c6_us_show" debugfs attribute. Reads the counter value using
Intel Platform Monitoring Technology (PMT) driver API. This counter is
useful for determining the idle residency of CPUs in the compute tile.
Also adds a missing forward declaration for punit_ep which was declared in
an earlier upstream commit but only used for the first time in this one.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-20-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support to read the low power mode requirements for Meteor Lake M and
Meteor Lake P.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-19-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On supported platforms, the low power mode (LPM) requirements for entering
each idle substate are described in Platform Monitoring Technology (PMT)
telemetry entries. Provide a function for platform code to attempt to find
and read the requirements from the telemetry entries.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-18-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update the substate_requirements attribute to display the requirements for
all the PMCs on a package.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-17-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The PMC SSRAM device contains counters that are structured in Intel
Platform Monitoring Technology (PMT) telemetry regions. Look for and
register these telemetry regions from the driver so that they may be read
using the Intel PMT ABI.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-16-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of checking for a NULL regbase, use the return value from
pmc_core_ssram_init() to check if PMC discovery was successful. If not, use
the legacy enumeration method (which only works for the primary PMC).
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-15-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Clean up the code handling SSRAM discovery. Handle all resource allocation
and cleanup in pmc_core_ssram_get_pmc(). Return the error status from this
function but only fail the init if we fail to discover the primary PMC.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-14-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, if the PMC SSRAM initialization fails, no error is returned and
the only indication is that a PMC device has not been created. Instead,
allow an error to be returned and handled directly by the caller.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-13-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In order to setup a table of low power mode requirements for Meteor Lake,
pmc_core_get_low_power_modes() will need to be run from platform init code
so that the enabled modes are known, allowing the use of the
pmc_for_each_mode helper. Make the function global and call it from the
platform init code.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-12-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Export symbols to allow access to Intel PMT Telemetry data on available
devices. Provides APIs to search, register, and read telemetry using a
kref managed pointer that serves as a handle to a telemetry endpoint.
To simplify searching for present devices, have the IDA start at 1
instead of 0 so that 0 can be used to indicate end of search.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-11-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The PMT header is passed to several functions. Instead, store the header in
struct intel_pmt_entry which is also passed to these functions and shorten
the argument list. This simplifies the calls in preparation for later
changes. While here also perform a newline cleanup.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-10-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some devices may emulate PCI VSEC capabilities in MMIO. In such cases the
BAR is not readable from a config space. Provide a field for drivers to
indicate the base address to be used.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-9-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add and export intel_vsec_register() to allow the registration of Intel
extended capabilities from other drivers. Add check to look for memory
conflicts before registering a new capability. Since the vsec provider
may not be a PCI device, add a parent field to
intel_vsec_platform_info() to allow specifying the parent device for
device managed cleanup.
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-8-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of checking for a NULL parent argument in intel_vsec_add_aux() and
then assigning it to the probed device, remove this check and just pass the
device in the call. Since this function is exported, return -EINVAL if the
parent is not specified.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-7-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use cleanup.h helpers to handle cleanup of resources in
intel_vsec_add_dev() after failures.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-6-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In preparation for exporting an API to register Intel Vendor Specific
Extended Capabilities (VSEC) from other drivers, remove the pointer to
platform_info from intel_vsec_device. This prevents a potential page fault
when auxiliary drivers probe and attempt to dereference this pointer to
access the needed quirks field. Instead, just add the quirks to
intel_vsec_device.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-5-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In preparation for exporting an API to register Intel Vendor Specific
Extended Capabilities (VSEC) from other drivers, move needed structures to
the header file.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-4-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In intel_vsec_add_aux(), just return from the last call to
devm_add_action_or_reset() instead of checking its return value.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-3-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery
support to Intel PMT") added an xarray to track the list of vsec devices to
be recovered after a PCI error. But it did not provide cleanup for the list
leading to a memory leak that was caught by kmemleak. Do xa_alloc() before
devm_add_action_or_reset() so that the list may be cleaned up with
xa_erase() in the release function.
Fixes: 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-2-david.e.box@linux.intel.com
[hdegoede@redhat.com: Add missing xa_erase() on error-exit
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Silicom platform (silicom-platform) Linux driver for Swisscom
Business Box (Swisscom BB) as well as Cordoba family products.
This platform driver provides support for various functions via
the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON)
and device attributes.
Signed-off-by: Henry Shi <henryshi2018@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231124200334.5318-1-henryshi2018@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The secure boot state of the BlueField SoC is represented by two bits:
0 = production state
1 = secure boot enabled
2 = non-secure (secure boot disabled)
3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).
The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.
Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.
Fixes: 79e29cb8fb ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adhere to Linux kernel coding style.
Reported by checkpatch:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20231016191349.3856-1-edson.drosdeck@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Support CPU and GPU fan speed monitoring through WMI for Predator
PHN16-71.
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-3-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
"select ACPI_VIDEO" cause recursive dependency when "depends on HWMON"
is added:
drivers/hwmon/Kconfig:6:error: recursive dependency detected!
drivers/hwmon/Kconfig:6: symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:326: symbol EEEPC_LAPTOP depends on ACPI_VIDEO
drivers/acpi/Kconfig:208: symbol ACPI_VIDEO is selected by ACER_WMI
drivers/platform/x86/Kconfig:173: symbol ACER_WMI depends on HWMON
Replace the select with depends on to avoid this problem when the next
patch in this series adds "depends on HWMON".
There is a stub defined for the used acpi_video_get_backlight_type()
function when ACPI_VIDEO is not set, so use:
depends on ACPI_VIDEO || ACPI_VIDEO = n
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-4-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Acer Predator PHN16-71 has the mode key that is used to rotate thermal
modes or toggle turbo mode with predator sense app (ver. 4) on windows.
This patch includes platform profile and the mode key support for the
device and also includes a small fix for "WMI_gaming_execute_u64"
function.
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-2-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some machines like the HP Omen 17 ck2000nf contain WMI blocks
with zero instances, so any WMI driver which tries to handle the
associated WMI device will fail.
Skip such WMI blocks to avoid confusing any WMI drivers.
Reported-by: Alexis Belmonte <alexbelm48@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218188
Fixes: bff431e49f ("ACPI: WMI: Add ACPI-WMI mapping driver")
Tested-by: Alexis Belmonte <alexbelm48@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231129181654.5800-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.
Do not return negative number in case of issue, when
ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no
bytes consumed, this keep the exact same behavior as it was before.
This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf().
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
