3345 Commits

Author SHA1 Message Date
Ido Schimmel
676f4bb168 selftests: rtnetlink: Add a test case for multipath route get
Without previous patch a warning would be generated upon multipath route
get when FIB multipath hash policy is to use a 5-tuple for multipath
hash calculation.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 16:42:39 -08:00
Ido Schimmel
03a84ea3d8 selftests: forwarding: Add router test with VID 1
Previous patches made it possible to setup VLAN devices with VID 1 over
mlxsw ports. Verify this functionality actually works by conducting a
simple router test over VID 1.

Adding this test as a generic test since it can be run using veth pairs
and it can also be useful for other physical devices where VID 1 was
considered reserved (knowingly or not).

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 15:48:54 -08:00
Ido Schimmel
29b1e34efd selftests: mlxsw: Adjust test regarding VID 1
Previous patches made it possible to create VLAN devices with VID 1 over
mlxsw ports. Adjust the test to verify such an operation succeeds.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 15:48:54 -08:00
Ido Schimmel
9d15dceb8a selftests: mlxsw: Add a test case for L3 VNI
Previous patch added the ability to offload a VXLAN tunnel used for L3
VNI when it is present in the VLAN-aware bridge before the corresponding
VLAN interface is configured. This patch adds a test case to verify
that.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 15:48:54 -08:00
John Fastabend
9ee79a65d1 bpf: sk_msg, fix sk_msg_md access past end test
Currently, the test to ensure reads past the end of the sk_msg_md
data structure fail is incorrectly expecting success. Fix this
typo and use correct expected error.

Fixes: 945a47d87cee ("bpf: sk_msg, add tests for size field")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 23:47:08 +01:00
David S. Miller
2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 11:53:36 -08:00
Jakub Kicinski
489c066cfd selftests: bpf: add missing executables to .gitignore
commit 435f90a338ae ("selftests/bpf: add a test case for sock_ops
perf-event notification") missed adding new test to gitignore.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 17:28:29 +01:00
Jakub Kicinski
14507e35bd selftests: bpf: verifier: add tests for JSET interpretation
Validate that the verifier reasons correctly about the bounds
and removes dead code based on results of JSET instruction.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 17:28:28 +01:00
Jakub Kicinski
5a8d5209ac selftests: bpf: add trivial JSET tests
We seem to have no JSET instruction test, and LLVM does not
generate it at all, so let's add a simple hand-coded test
to make sure JIT implementations are correct.

v2:
 - extend test_verifier to handle multiple inputs and
   add the sample there (Daniel)
 - add a sign extension case

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 17:28:28 +01:00
Linus Torvalds
519be6995c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Off by one in netlink parsing of mac802154_hwsim, from Alexander
    Aring.

 2) nf_tables RCU usage fix from Taehee Yoo.

 3) Flow dissector needs nhoff and thoff clamping, from Stanislav
    Fomichev.

 4) Missing sin6_flowinfo initialization in SCTP, from Xin Long.

 5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva.

 6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit.

 7) Fix SKB leak in rtlwifi, from Larry Finger.

 8) Fix state pruning in bpf verifier, from Jakub Kicinski.

 9) Don't handle completely duplicate fragments as overlapping, from
    Michal Kubecek.

10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula.

11) Fix TCP fallback socket release in smc, from Myungho Jung.

12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits)
  rds: Fix warning.
  neighbor: NTF_PROXY is a valid ndm_flag for a dump request
  net: mvpp2: fix the phylink mode validation
  net/sched: cls_flower: Remove old entries from rhashtable
  net/tls: allocate tls context using GFP_ATOMIC
  iptunnel: make TUNNEL_FLAGS available in uapi
  gro_cell: add napi_disable in gro_cells_destroy
  lan743x: Remove MAC Reset from initialization
  net/mlx5e: Remove the false indication of software timestamping support
  net/mlx5: Typo fix in del_sw_hw_rule
  net/mlx5e: RX, Fix wrong early return in receive queue poll
  ipv6: explicitly initialize udp6_addr in udp_sock_create6()
  bnxt_en: Fix ethtool self-test loopback.
  net/rds: remove user triggered WARN_ON in rds_sendmsg
  net/rds: fix warn in rds_message_alloc_sgs
  ath10k: skip sending quiet mode cmd for WCN3990
  mac80211: free skb fraglist before freeing the skb
  nl80211: fix memory leak if validate_pae_over_nl80211() fails
  net/smc: fix TCP fallback socket release
  vxge: ensure data0 is initialized in when fetching firmware version information
  ...
2018-12-19 23:34:33 -08:00
Peter Oskolkov
3f2eadb108 selftests: net: refactor reuseport_addr_any test
This patch refactors reuseport_add_any selftest a bit:
- makes it more modular (eliminates several copy/pasted blocks);
- skips DCCP tests if DCCP is not supported

V2: added "Signed-off-by" tag.

Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 16:41:43 -08:00
Martin KaFai Lau
e30f5640e3 bpf: Add BPF_LD_IMM64 to the line_info test
This patch adds a BPF_LD_IMM64 case to the line_info test
to ensure the kernel rejects linfo_info.insn_off pointing
to the 2nd 8 bytes of the BPF_LD_IMM64.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-19 15:42:55 -08:00
Roopa Prabhu
8deecf3557 selftests: rtnetlink.sh: add testcase for neigh get
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 13:37:34 -08:00
Ido Schimmel
489c25f9a3 selftests: mlxsw: Add rtnetlink tests
Add a new test that is focused on rtnetlink configuration. Its purpose
is to test valid and invalid (as deemed by mlxsw) configurations and
make sure that they succeed / fail without producing a trace.

Some of the test cases are derived from recent fixes in order to make
sure that the fixed bugs are not introduced again.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 12:28:07 -08:00
Petr Machata
55cbe07942 selftests: net: Add test_vxlan_fdb_changelink.sh
Add a test to exercise the fix from the previous patch.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 21:18:26 -08:00
John Fastabend
945a47d87c bpf: sk_msg, add tests for size field
This adds tests to read the size field to test_verifier.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-19 00:27:23 +01:00
Jiong Wang
0bae2d4d62 bpf: correct slot_type marking logic to allow more stack slot sharing
Verifier is supposed to support sharing stack slot allocated to ptr with
SCALAR_VALUE for privileged program. However this doesn't happen for some
cases.

The reason is verifier is not clearing slot_type STACK_SPILL for all bytes,
it only clears part of them, while verifier is using:

  slot_type[0] == STACK_SPILL

as a convention to check one slot is ptr type.

So, the consequence of partial clearing slot_type is verifier could treat a
partially overridden ptr slot, which should now be a SCALAR_VALUE slot,
still as ptr slot, and rejects some valid programs.

Before this patch, test_xdp_noinline.o under bpf selftests, bpf_lxc.o and
bpf_netdev.o under Cilium bpf repo, when built with -mattr=+alu32 are
rejected due to this issue. After this patch, they all accepted.

There is no processed insn number change before and after this patch on
Cilium bpf programs.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-18 14:45:01 -08:00
David S. Miller
77c7a7b3e7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2018-12-18

1) Add xfrm policy selftest scripts.
   From Florian Westphal.

2) Split inexact policies into four different search list
   classes and use the rbtree infrastructure to store/lookup
   the policies. This is to improve the policy lookup
   performance after the flowcache removal.
   Patches from Florian Westphal.

3) Various coding style fixes, from Colin Ian King.

4) Fix policy lookup logic after adding the inexact policy
   search tree infrastructure. From Florian Westphal.

5) Remove a useless remove BUG_ON from xfrm6_dst_ifdown.
   From Li RongQing.

6) Use the correct policy direction for lookups on hash
   rebuilding. From Florian Westphal.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18 08:49:48 -08:00
Yonghong Song
0d7410ea6e tools/bpf: check precise {func, line, jited_line}_info_rec_size in test_btf
Current btf func_info, line_info and jited_line are designed to be
extensible. The record sizes for {func,line}_info are passed to kernel,
and the record sizes for {func,line,jited_line}_info are returned to
userspace during bpf_prog_info query.

In bpf selftests test_btf.c, when testing whether kernel returns
a legitimate {func,line, jited_line)_info rec_size, the test only
compares to the minimum allowed size. If the returned rec_size is smaller
than the minimum allowed size, it is considered incorrect.
The minimum allowed size for these three info sizes are equal to
current value of sizeof(struct bpf_func_info), sizeof(struct bpf_line_info)
and sizeof(__u64).

The original thinking was that in the future when rec_size is increased
in kernel, the same test should run correctly. But this sacrificed
the precision of testing under the very kernel the test is shipped with,
and bpf selftest is typically run with the same repo kernel.

So this patch changed the testing of rec_size such that the
kernel returned value should be equal to the size defined by
tools uapi header bpf.h which syncs with kernel uapi header.

Martin discovered a bug in one of rec_size comparisons.
Instead of comparing to minimum func_info rec_size 8, it compares to 4.
This patch fixed that issue as well.

Fixes: 999d82cbc044 ("tools/bpf: enhance test_btf file testing to test func info")
Fixes: 05687352c600 ("bpf: Refactor and bug fix in test_func_type in test_btf.c")
Fixes: 4d6304c76355 ("bpf: Add unit tests for bpf_line_info")
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 14:46:32 +01:00
Yonghong Song
d0ebce687e tools/bpf: test kernel bpffs map pretty print with struct kind_flag
The new tests are added to test bpffs map pretty print in kernel with kind_flag
for structure type.

  $ test_btf -p
  ......
  BTF pretty print array(#1)......OK
  BTF pretty print array(#2)......OK
  PASS:8 SKIP:0 FAIL:0

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 01:12:00 +01:00
Yonghong Song
cd9de5d3d6 tools/bpf: add test_btf unit tests for kind_flag
This patch added unit tests for different types handling
type->info.kind_flag. The following new tests are added:
  $ test_btf
  ...
  BTF raw test[82] (invalid int kind_flag): OK
  BTF raw test[83] (invalid ptr kind_flag): OK
  BTF raw test[84] (invalid array kind_flag): OK
  BTF raw test[85] (invalid enum kind_flag): OK
  BTF raw test[86] (valid fwd kind_flag): OK
  BTF raw test[87] (invalid typedef kind_flag): OK
  BTF raw test[88] (invalid volatile kind_flag): OK
  BTF raw test[89] (invalid const kind_flag): OK
  BTF raw test[90] (invalid restrict kind_flag): OK
  BTF raw test[91] (invalid func kind_flag): OK
  BTF raw test[92] (invalid func_proto kind_flag): OK
  BTF raw test[93] (valid struct kind_flag, bitfield_size = 0): OK
  BTF raw test[94] (valid struct kind_flag, int member, bitfield_size != 0): OK
  BTF raw test[95] (valid union kind_flag, int member, bitfield_size != 0): OK
  BTF raw test[96] (valid struct kind_flag, enum member, bitfield_size != 0): OK
  BTF raw test[97] (valid union kind_flag, enum member, bitfield_size != 0): OK
  BTF raw test[98] (valid struct kind_flag, typedef member, bitfield_size != 0): OK
  BTF raw test[99] (valid union kind_flag, typedef member, bitfield_size != 0): OK
  BTF raw test[100] (invalid struct type, bitfield_size greater than struct size): OK
  BTF raw test[101] (invalid struct type, kind_flag bitfield base_type int not regular): OK
  BTF raw test[102] (invalid struct type, kind_flag base_type int not regular): OK
  BTF raw test[103] (invalid union type, bitfield_size greater than struct size): OK
  ...
  PASS:122 SKIP:0 FAIL:0

The second parameter name of macro
  BTF_INFO_ENC(kind, root, vlen)
in selftests test_btf.c is also renamed from "root" to "kind_flag".
Note that before this patch "root" is not used and always 0.

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 01:11:59 +01:00
James Morris
5580b4a1a8 Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next-integrity
From Mimi:

In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load
syscall.  Different signature verification methods exist for verifying
the kexec'ed kernel image.  This pull request adds additional support
in IMA to prevent loading unsigned kernel images via the kexec_load
syscall, independently of the IMA policy rules, based on the runtime
"secure boot" flag.  An initial IMA kselftest is included.

In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.

(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here.)
2018-12-17 11:26:46 -08:00
Shuah Khan
283ac6d5fb selftests: Fix test errors related to lib.mk khdr target
Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") added
khdr target to run headers_install target from the main Makefile. The
logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize
variables and include files to run headers_install from the top level
Makefile. There are a few problems with this logic.

1. Exposes top_srcdir to all tests
2. Common logic impacts all tests
3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests
   add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in
   some cases, and STATIC_LIBS in other cases. This makes this framework
   confusing to use.

The common logic that runs for all tests even when KSFT_KHDR_INSTALL
isn't defined by the test. top_srcdir is initialized to a default value
when test doesn't initialize it. It works for all tests without a sub-dir
structure and tests with sub-dir structure fail to build.

e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf

../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make: *** No rule to make target '../../../../scripts/subarch.include'.  Stop.

There is no reason to require all tests to define top_srcdir and there is
no need to require tests to add khdr dependency using adhoc changes to
TEST_* and other variables.

Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests
that have the dependency on headers_install.

Change common logic to include khdr target define and "all" target with
dependency on khdr when KSFT_KHDR_INSTALL is defined.

Only tests that have dependency on headers_install have to define just
the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to
specify khdr dependency in the test Makefiles.

Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuah@kernel.org>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-12-17 09:17:55 -07:00
Nir Dotan
5d06a76d9e selftests: mlxsw: Add Bloom delta test
The eRP table is active when there is more than a single rule
pattern. It may be that the patterns are close enough and use delta
mechanism. Bloom filter index computation is based on the values of
{rule & mask, mask ID, region ID} where the rule delta bits must be
cleared.

Add a test that exercises Bloom filter with delta mechanism.
Configure rules within delta range and pass a packet which is
supposed to hit the correct rule.

Signed-off-by: Nir Dotan <nird@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16 15:20:34 -08:00
Nir Dotan
5118ca4edf selftests: mlxsw: Add Bloom filter complex test
Bloom filter index computation is based on the values of
{rule & mask, mask ID, region ID} and the computation also varies
according to the region key size.

Add a test that exercises the possible combinations by creating
multiple chains using different key sizes and then pass a frame that
is supposed to to produce a hit on all of the regions.

Signed-off-by: Nir Dotan <nird@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16 15:20:34 -08:00
Nir Dotan
095c720807 selftests: mlxsw: Add Bloom filter simple test
Add a test that exercises Bloom filter code.
Activate eRP table in the region by adding multiple rule patterns which
with very high probability use different entries in the Bloom filter.
Then send packets in order to check lookup hits on all relevant rules.

Signed-off-by: Nir Dotan <nird@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16 15:20:34 -08:00
Roopa Prabhu
31d31951d0 selftests: net: rtnetlink.sh: add fdb get test
tests the below three cases of bridge fdb get:
[bridge, mac, vlan]
[bridge_port, mac, vlan, flags=[NTF_MASTER]]
[vxlandev, mac, flags=NTF_SELF]

depends on iproute2 support for bridge fdb get.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16 14:42:34 -08:00
Peter Oskolkov
11fb60d108 selftests: net: reuseport_addr_any: add DCCP
This patch adds coverage of DCCP to reuseport_addr_any selftest.

Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16 12:14:29 -08:00
David S. Miller
10589a568f Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2018-12-15

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) fix liveness propagation of callee saved registers, from Jakub.

2) fix overflow in bpf_jit_limit knob, from Daniel.

3) bpf_flow_dissector api fix, from Stanislav.

4) bpf_perf_event api fix on powerpc, from Sandipan.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 10:58:32 -08:00
Alexei Starovoitov
19e2dbb7dd bpf: improve stacksafe state comparison
"if (old->allocated_stack > cur->allocated_stack)" check is too conservative.
In some cases explored stack could have allocated more space,
but that stack space was not live.
The test case improves from 19 to 15 processed insns
and improvement on real programs is significant as well:

                       before    after
bpf_lb-DLB_L3.o        1940      1831
bpf_lb-DLB_L4.o        3089      3029
bpf_lb-DUNKNOWN.o      1065      1064
bpf_lxc-DDROP_ALL.o    28052     26309
bpf_lxc-DUNKNOWN.o     35487     33517
bpf_netdev.o           10864     9713
bpf_overlay.o          6643      6184
bpf_lcx_jit.o          38437     37335

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-15 01:28:32 +01:00
Alexei Starovoitov
730ff40f80 selftests/bpf: check insn processed in test_verifier
Teach test_verifier to parse verifier output for insn processed
and compare with expected number.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-15 01:28:32 +01:00
Peter Oskolkov
6254e5c6a8 selftests: net: test that listening sockets match on address properly
This patch adds a selftest that verifies that a socket listening
on a specific address is chosen in preference over sockets
that listen on any address. The test covers UDP/UDP6/TCP/TCP6.

It is based on, and similar to, reuseport_dualstack.c selftest.

Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14 15:55:20 -08:00
Paolo Bonzini
5132411985 kvm: selftests: ucall: improve ucall placement in memory, fix unsigned comparison
Based on a patch by Andrew Jones.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14 18:00:08 +01:00
Vitaly Kuznetsov
7edcb73433 KVM: selftests: Add hyperv_cpuid test
Add a simple (and stupid) hyperv_cpuid test: check that we got the
expected number of entries with and without Enlightened VMCS enabled
and that all currently reserved fields are zeroed.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14 17:59:56 +01:00
Vitaly Kuznetsov
7e50c424f8 KVM: selftests: implement an unchecked version of vcpu_ioctl()
In case we want to test failing ioctls we need an option to not
fail. Following _vcpu_run() precedent implement _vcpu_ioctl().

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14 17:59:55 +01:00
Paolo Bonzini
2a31b9db15 kvm: introduce manual dirty log reprotect
There are two problems with KVM_GET_DIRTY_LOG.  First, and less important,
it can take kvm->mmu_lock for an extended period of time.  Second, its user
can actually see many false positives in some cases.  The latter is due
to a benign race like this:

  1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
     them.
  2. The guest modifies the pages, causing them to be marked ditry.
  3. Userspace actually copies the pages.
  4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
     they were not written to since (3).

This is especially a problem for large guests, where the time between
(1) and (3) can be substantial.  This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns.  Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page.  The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14 12:34:19 +01:00
Petr Machata
9651ee10ce selftests: mlxsw: Test FID RIF MAC vetoing
When a FID RIF is created for a bridge with IP address, its MAC address
must obey the same requirements as other RIFs. Test that attempts to
change the address incompatibly by attaching a device are vetoed with
extack.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13 18:41:39 -08:00
Petr Machata
555afaae12 selftests: mlxsw: Test RIF MAC vetoing
Test that attempts to change address in a way that violates Spectrum
requirements are vetoed with extack.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13 18:41:39 -08:00
Dave Jiang
4c6926a23b acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs
Add support to unlock the dimm via the kernel key management APIs. The
passphrase is expected to be pulled from userspace through keyutils.
The key management and sysfs attributes are libnvdimm generic.

Encrypted keys are used to protect the nvdimm passphrase at rest. The
master key can be a trusted-key sealed in a TPM, preferred, or an
encrypted-key, more flexible, but more exposure to a potential attacker.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-13 17:54:13 -08:00
Dave Jiang
f298939655 acpi/nfit, libnvdimm: Introduce nvdimm_security_ops
Some NVDIMMs, like the ones defined by the NVDIMM_FAMILY_INTEL command
set, expose a security capability to lock the DIMMs at poweroff and
require a passphrase to unlock them. The security model is derived from
ATA security. In anticipation of other DIMMs implementing a similar
scheme, and to abstract the core security implementation away from the
device-specific details, introduce nvdimm_security_ops.

Initially only a status retrieval operation, ->state(), is defined,
along with the base infrastructure and definitions for future
operations.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-13 17:54:13 -08:00
Linus Torvalds
880b9df1bf XArray updates for 4.20-rc7
Two bugfixes, each with test-suite updates, two improvements to the
 test-suite without associated bugs, and one patch adding a missing API.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlwS8ZUUHHdpbGx5QGlu
 ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5h0wf9Fmc3z3WjmX05he+XKhGq1jQuHYVi
 zt8Eggsc7ns1hX8xPdwSw240CDOCBcbXxCyNL9KFCqlIkfxTAe8pYgoTDKuXhVAK
 U7VTCHCxJpsYzfhkEke5DaASGb/YP1kmvoTJs7qCfhBuI9ERXLVK6cESJNDZhlMA
 /d7VfRwRiqSLnK13AXPZAA9Pnw2GtAolMDU9CC9nOtMRlRDVwsQiwYiQ/mBRYK00
 u0LoruwBJ7XAoe7Bo1CFmkvJuIV794cmhqkEY2cY85e9aoj15+BDqOu1la8DTaOl
 e7+7PwK1I6Ed6DfPixGleUP7BYHHXCfb/RVEYn22qGC/YHUQRtpbwrY37Q==
 =b+pK
 -----END PGP SIGNATURE-----

Merge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax

Pull XArray fixes from Matthew Wilcox:
 "Two bugfixes, each with test-suite updates, two improvements to the
  test-suite without associated bugs, and one patch adding a missing
  API"

* tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax:
  XArray: Fix xa_alloc when id exceeds max
  XArray tests: Check iterating over multiorder entries
  XArray tests: Handle larger indices more elegantly
  XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh
  radix tree: Don't return retry entries from lookup
2018-12-13 16:35:58 -08:00
Shuah Khan
211929fd3f selftests: Fix test errors related to lib.mk khdr target
Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") added
khdr target to run headers_install target from the main Makefile. The
logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize
variables and include files to run headers_install from the top level
Makefile. There are a few problems with this logic.

1. Exposes top_srcdir to all tests
2. Common logic impacts all tests
3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests
   add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in
   some cases, and STATIC_LIBS in other cases. This makes this framework
   confusing to use.

The common logic that runs for all tests even when KSFT_KHDR_INSTALL
isn't defined by the test. top_srcdir is initialized to a default value
when test doesn't initialize it. It works for all tests without a sub-dir
structure and tests with sub-dir structure fail to build.

e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf

../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make: *** No rule to make target '../../../../scripts/subarch.include'.  Stop.

There is no reason to require all tests to define top_srcdir and there is
no need to require tests to add khdr dependency using adhoc changes to
TEST_* and other variables.

Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests
that have the dependency on headers_install.

Change common logic to include khdr target define and "all" target with
dependency on khdr when KSFT_KHDR_INSTALL is defined.

Only tests that have dependency on headers_install have to define just
the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to
specify khdr dependency in the test Makefiles.

Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-12-13 16:51:30 -07:00
Andrey Ignatov
28c1272914 selftests/bpf: Fix sk lookup usage in test_sock_addr
Semantic of netns_id argument of bpf_sk_lookup_tcp and bpf_sk_lookup_udp
was changed (fixed) in f71c6143c203. Corresponding changes have to be
applied to all call sites in selftests. The patch fixes corresponding
call sites in test_sock_addr test: pass BPF_F_CURRENT_NETNS instead of 0
in netns_id argument.

Fixes: f71c6143c203 ("bpf: Support sk lookup in netns with id 0")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Joe Stringer <joe@wand.net.nz>
Tested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13 23:42:16 +01:00
Linus Torvalds
65e08c5e86 linux-kselftest-4.20-rc7
This Kselftest update for Linux 4.20-rc7 consists of a single fix for
 seccomp test from Kees Cook.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlwSv6sACgkQCwJExA0N
 QxyMog/+OU7CdkJSjuWnu+8I0uWlmmtco0xb0fRh25do4QSlxoaZloixHupakK2+
 RbV32pXMuvc+Sdg8ALHrYT4KVcFmIgFDieaflj4SoECwbBUMAB7YPSPW0EsYoM41
 IRNYcOGzOv3FTDr+74es9vyN2vv20+G3IIl0urGJJTLiG3VKmphrcF2/x7RDC3fb
 2VCo1zBvUm+nN2+TOQQNmQxUOSn92A3Rq0Tpz3RqAFun9+bPq7amha0p8et5vcaY
 yCUVegRA7KKtTlqV2RQpPNhXr9vBtWVoBmFn02JVE74/Vh4Y7sKwKUekyPtBFUQD
 4ncSuk5v7MjrEuCcmZH1eXO/KaxoYelf/1q8B/ZblqKQJV5elQt2vtoX5zwRU9BJ
 5Zsal+/CJCJvYe9zJt3eola3OYmCmUsvImPfvl9c4ruo9hFBDTfwCCABnHkD0Kvg
 hbHAEeLRLWviVufy3jHI3HxsaULMWtId5KIISuXWY1aqLN5noqAql5befqjYgXzp
 EeZ1fr0MBa3gXrhlZ6TVMU2leRX7C4NP1ig4IZArugdD7Bh9fqJlTa+GITIMLGub
 IGf0j188p2PZUJbOFDaqbnHXkf+7IvAFqBCYydJmILSbPOyLUprtpPZa9xA5jp5R
 A2ggHtxCGWsE05MoOQwP7SQZB7R3iUJ9lA07wh4l62MGK2jeeyI=
 =bp9r
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:
 "A single fix for a seccomp test from Kees Cook."

* tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/seccomp: Remove SIGSTOP si_pid check
2018-12-13 12:57:21 -08:00
Tom Murphy
6edf2e3710 fix dma-buf/udmabuf selftest
This patch fixes the udmabuf selftest. Currently the selftest is broken.
I fixed the selftest by setting the F_SEAL_SHRINK seal on the memfd
file descriptor which is required by udmabuf and added the test to
the selftest Makefile.

Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-12-13 13:03:48 -07:00
Colin Ian King
0ca2923e2a selftests: watchdog: fix spelling mistake "experies" -> "expires"
There is a spelling mistake in the --gettimeleft help text, fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-12-13 13:03:19 -07:00
Jakub Kicinski
7640ead939 bpf: verifier: make sure callees don't prune with caller differences
Currently for liveness and state pruning the register parentage
chains don't include states of the callee.  This makes some sense
as the callee can't access those registers.  However, this means
that READs done after the callee returns will not propagate into
the states of the callee.  Callee will then perform pruning
disregarding differences in caller state.

Example:

   0: (85) call bpf_user_rnd_u32
   1: (b7) r8 = 0
   2: (55) if r0 != 0x0 goto pc+1
   3: (b7) r8 = 1
   4: (bf) r1 = r8
   5: (85) call pc+4
   6: (15) if r8 == 0x1 goto pc+1
   7: (05) *(u64 *)(r9 - 8) = r3
   8: (b7) r0 = 0
   9: (95) exit

   10: (15) if r1 == 0x0 goto pc+0
   11: (95) exit

Here we acquire unknown state with call to get_random() [1].  Then
we store this random state in r8 (either 0 or 1) [1 - 3], and make
a call on line 5.  Callee does nothing but a trivial conditional
jump (to create a pruning point).  Upon return caller checks the
state of r8 and either performs an unsafe read or not.

Verifier will first explore the path with r8 == 1, creating a pruning
point at [11].  The parentage chain for r8 will include only callers
states so once verifier reaches [6] it will mark liveness only on states
in the caller, and not [11].  Now when verifier walks the paths with
r8 == 0 it will reach [11] and since REG_LIVE_READ on r8 was not
propagated there it will prune the walk entirely (stop walking
the entire program, not just the callee).  Since [6] was never walked
with r8 == 0, [7] will be considered dead and replaced with "goto -1"
causing hang at runtime.

This patch weaves the callee's explored states onto the callers
parentage chain.  Rough parentage for r8 would have looked like this
before:

[0] [1] [2] [3] [4] [5]   [10]      [11]      [6]      [7]
     |           |      ,---|----.    |        |        |
  sl0:         sl0:    / sl0:     \ sl0:      sl0:     sl0:
  fr0: r8 <-- fr0: r8<+--fr0: r8   `fr0: r8  ,fr0: r8<-fr0: r8
                       \ fr1: r8 <- fr1: r8 /
                        \__________________/

after:

[0] [1] [2] [3] [4] [5]   [10]      [11]      [6]      [7]
     |           |          |         |        |        |
   sl0:         sl0:      sl0:       sl0:      sl0:     sl0:
   fr0: r8 <-- fr0: r8 <- fr0: r8 <- fr0: r8 <-fr0: r8<-fr0: r8
                          fr1: r8 <- fr1: r8

Now the mark from instruction 6 will travel through callees states.

Note that we don't have to connect r0 because its overwritten by
callees state on return and r1 - r5 because those are not alive
any more once a call is made.

v2:
 - don't connect the callees registers twice (Alexei: suggestion & code)
 - add more details to the comment (Ed & Alexei)
v1: don't unnecessarily link caller saved regs (Jiong)

Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-13 10:35:40 -08:00
Martin KaFai Lau
177e77169b bpf: Remove !func_info and !line_info check from test_btf and bpftool
kernel can provide the func_info and line_info even
it fails the btf_dump_raw_ok() test because they don't contain
kernel address.  This patch removes the corresponding '== 0'
test.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13 12:16:31 +01:00
Petr Machata
06a2fc8f14 selftests: mlxsw: extack: Test VLAN add on a port device
Test mapping a VLAN at a port device such that on the same VLAN, there
already is an unoffloadable VXLAN device.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12 16:34:22 -08:00
Petr Machata
b498dc7d29 selftests: mlxsw: extack: Test VLAN add on a VXLAN device
Test mapping a VLAN at a VXLAN device that can't be offloaded.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12 16:34:22 -08:00