IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add two tests to make sure that we cannot add a rule with access
rights that are unknown:
* fs: layout0.rule_with_unknown_access
* net: mini.rule_with_unknown_access
Rename unknown_access_rights tests to ruleset_with_unknown_access .
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231130093616.67340-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
conntrack zones are heavily used by tools like openvswitch to run
multiple virtual "routers" on a single machine. In this context each
conntrack zone matches to a single router, thereby preventing
overlapping IPs from becoming issues.
In these systems it is common to operate on all conntrack entries of a
given zone, e.g. to delete them when a router is deleted. Previously this
required these tools to dump the full conntrack table and filter out the
relevant entries in userspace potentially causing performance issues.
To do this we reuse the existing CTA_ZONE attribute. This was previous
parsed but not used during dump and flush requests. Now if CTA_ZONE is
set we filter these operations based on the provided zone.
However this means that users that previously passed CTA_ZONE will
experience a difference in functionality.
Alternatively CTA_FILTER could have been used for the same
functionality. However it is not yet supported during flush requests and
is only available when using AF_INET or AF_INET6.
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Co-developed-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event() fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=sEmi
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and bpf.
Current release - regressions:
- bpf: syzkaller found null ptr deref in unix_bpf proto add
- eth: i40e: fix ST code value for clause 45
Previous releases - regressions:
- core: return error from sk_stream_wait_connect() if sk_wait_event()
fails
- ipv6: revert remove expired routes with a separated list of routes
- wifi rfkill:
- set GPIO direction
- fix crash with WED rx support enabled
- bluetooth:
- fix deadlock in vhci_send_frame
- fix use-after-free in bt_sock_recvmsg
- eth: mlx5e: fix a race in command alloc flow
- eth: ice: fix PF with enabled XDP going no-carrier after reset
- eth: bnxt_en: do not map packet buffers twice
Previous releases - always broken:
- core:
- check vlan filter feature in vlan_vids_add_by_dev() and
vlan_vids_del_by_dev()
- check dev->gso_max_size in gso_features_check()
- mptcp: fix inconsistent state on fastopen race
- phy: skip LED triggers on PHYs on SFP modules
- eth: mlx5e:
- fix double free of encap_header
- fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()"
* tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: check dev->gso_max_size in gso_features_check()
kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail
net/ipv6: Revert remove expired routes with a separated list of routes
net: avoid build bug in skb extension length calculation
net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean()
net: stmmac: fix incorrect flag check in timestamp interrupt
selftests: add vlan hw filter tests
net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
net: hns3: add new maintainer for the HNS3 ethernet driver
net: mana: select PAGE_POOL
net: ks8851: Fix TX stall caused by TX buffer overrun
ice: Fix PF with enabled XDP going no-carrier after reset
ice: alter feature support check for SRIOV and LAG
ice: stop trashing VF VSI aggregator node ID information
mailmap: add entries for Geliang Tang
mptcp: fill in missing MODULE_DESCRIPTION()
mptcp: fix inconsistent state on fastopen race
selftests: mptcp: join: fix subflow_send_ack lookup
net: phy: skip LED triggers on PHYs on SFP modules
bpf: Add missing BPF_LINK_TYPE invocations
...
Using page order for deciding what the size of the ring buffer sub buffers
are is exposing a bit too much of the implementation. Although the sub
buffers are only allocated in orders of pages, allow the user to specify
the minimum size of each sub-buffer via kilobytes like they can with the
buffer size itself.
If the user specifies 3 via:
echo 3 > buffer_subbuf_size_kb
Then the sub-buffer size will round up to 4kb (on a 4kb page size system).
If they specify:
echo 6 > buffer_subbuf_size_kb
The sub-buffer size will become 8kb.
and so on.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.809766769@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a self test that will write into the trace buffer with differ trace
sub buffer order sizes.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.520496304@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When mapping a file on overlayfs, the file stored in ->vm_file is a
backing file whose f_inode is on the underlying filesystem. We need to
verify that /proc/pid/maps contains numbers of the overlayfs file, but
not its backing file.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20231214064439.1023011-2-avagin@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYQVjgAKCRDbK58LschI
g/NfAP9xMBCASd22+KPu44FtPPO5DKcdG7hATXZMpb/cygF8GQEAojcZ4jztx42S
F1+4RPEoxrn31oVYdtEGFY9q85ruzgA=
=2XhN
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-21
Hi David, hi Jakub, hi Paolo, hi Eric,
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 5 day(s) which contain
a total of 4 files changed, 45 insertions(+).
The main changes are:
1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(),
from Jiri Olsa.
2) Fix another syzkaller-found issue which triggered a NULL pointer dereference
in BPF sockmap for unconnected unix sockets, from John Fastabend.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add missing BPF_LINK_TYPE invocations
bpf: sockmap, test for unconnected af_unix sock
bpf: syzkaller found null ptr deref in unix_bpf proto add
====================
Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.
Before fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
1
After fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
0
Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test for reproducing the update_schemes_tried_{regions,bytes}
command-causing indefinite hang bug that fixed by commit 7d6fa31a2fd7
("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions"),
to avoid mistakenly re-introducing the bug. Refer to the fix commit for
more details of the bug.
Link: https://lkml.kernel.org/r/20231212194810.54457-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for verifying the accuracy of DAMON's access monitoring
functionality. The test starts a program of artificial access pattern,
monitor the access pattern using DAMON, and check if DAMON finds expected
amount of hot data region (working set size) with only acceptable error
rate.
Note that the acceptable error rate is set with only naive assumptions and
small number of tests. Hence failures of the test may not always mean
DAMON is broken. Rather than that, those could be a signal to better
understand the real accuracy level of DAMON in wider environments. Based
on further finding, we could optimize DAMON or adjust the expectation of
the test.
Link: https://lkml.kernel.org/r/20231212194810.54457-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement update_schemes_tried_bytes command of DAMON sysfs interface in
_damon_sysfs.py. It is not only making the update, but also read the
updated value from the sysfs interface and store it in the Kdamond python
objects so that the user of the module can easily get the value.
Link: https://lkml.kernel.org/r/20231212194810.54457-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend the tests-writing-purpose DAMON sysfs control module to support the
kdamonds start functionality.
Link: https://lkml.kernel.org/r/20231212194810.54457-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: add Python-written DAMON functionality
tests", v2.
DAMON exports most of its functionality via its sysfs interface. Hence
most DAMON functionality tests could be implemented using the interface.
However, because the interfaces require simple but multiple operations for
many controls, writing all such tests from the scratch could be repetitive
and time consuming.
Implement a minimum DAMON sysfs control module, and a couple of DAMON
functionality tests using the control module. The first test is for
ensuring minimum accuracy of data access monitoring, and the second test
is for finding if a previously found and fixed bug is introduced again.
Note that the DAMON sysfs control module is only for avoiding duplicating
code in tests. For convenient and general control of DAMON, users should
use DAMON user-space tools that developed for the purpose, such as
damo[1].
[1] https://github.com/damonitor/damo
Patches Sequence
----------------
This patchset is constructed with five patches. The first three patches
implement a Python-written test implementation-purpose DAMON sysfs control
module. The implementation is incrementally done in the sequence of the
basic data structure (first patch) first, kdamonds start command (second
patch) next, and finally DAMOS tried bytes update command (third patch).
Then two patches for implementing selftests using the module follows. The
fourth patch implements a basic functionality test of DAMON for working
set estimation accuracy. Finally, the fifth patch implements a corner
case test for a previously found bug.
This patch (of 5):
Implement a python module for DAMON sysfs controls. The module is aimed
to be useful for writing DAMON functionality tests in future.
Nonetheless, this module is only representing a subset of DAMON sysfs
files. Following commits will implement more DAMON sysfs controls.
Link: https://lkml.kernel.org/r/20231212194810.54457-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231212194810.54457-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid pointer type value compared with 0 to make code clear.
./tools/testing/radix-tree/maple.c:34142:15-16: WARNING comparing pointer to 0.
Link: https://lkml.kernel.org/r/20231208020450.7003-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7696
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add tests similar to the existing PMD-sized THP tests, but which operate
on memory backed by (PTE-mapped) multi-size THP. This reuses all the
existing infrastructure. If the test suite detects that multi-size THP is
not supported by the kernel, the new tests are skipped.
Link: https://lkml.kernel.org/r/20231207161211.2374093-11-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
do_run_with_thp() prepares (PMD-sized) THP memory into different states
before running tests. With the introduction of multi-size THP, we would
like to reuse this logic to also test those smaller THP sizes. So let's
add a thpsize parameter which tells the function what size THP it should
operate on.
A separate commit will utilize this change to add new tests for multi-size
THP, where available.
Link: https://lkml.kernel.org/r/20231207161211.2374093-10-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The `collapse_max_ptes_none` test was previously failing when a THP size
less than PMD-size had enabled="always". The root cause is because the
test faults in 1 page less than the threshold it set for collapsing. But
when THP is enabled always, we "over allocate" and therefore the threshold
is passed, and collapse unexpectedly succeeds.
Solve this by enlightening khugepaged selftest. Add a command line option
to pass in the desired THP size that should be used for all anonymous
allocations. The harness will then explicitly configure a THP size as
requested and modify the `collapse_max_ptes_none` test so that it faults
in the threshold minus the number of pages in the configured THP size. If
no command line option is provided, default to order 0, as per previous
behaviour.
I chose to use an order in the command line interface, since this makes
the interface agnostic of base page size, making it easier to invoke from
run_vmtests.sh.
Link: https://lkml.kernel.org/r/20231207161211.2374093-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Save and restore the new per-size hugepage enabled setting, if available
on the running kernel.
Since the number of per-size directories is not fixed, solve this as
simply as possible by catering for a maximum number in the thp_settings
struct (20). Each array index is the order. The value of THP_NEVER is
changed to 0 so that all of these new settings default to THP_NEVER and
the user only needs to fill in the ones they want to enable.
Link: https://lkml.kernel.org/r/20231207161211.2374093-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The khugepaged test has a useful framework for save/restore/pop/push of
all thp settings via the sysfs interface. This will be useful to
explicitly control multi-size THP settings in other tests, so let's move
it out of khugepaged and into its own thp_settings.[c|h] utility.
Link: https://lkml.kernel.org/r/20231207161211.2374093-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, the saved thp settings would be restored upon a signal or at
the natural end of the test suite. But there are some tests that directly
call exit() upon failure. In this case, the thp settings were not being
restored, which could then influence other tests.
Fix this by installing an atexit() handler to do the actual restore. The
signal handler can now just call exit() and the atexit handler is invoked.
Link: https://lkml.kernel.org/r/20231207161211.2374093-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "locked-in-memory size" limit per process can be non-multiple of
page_size. The mmap() fails if we try to allocate locked-in-memory with
same size as the allowed limit if it isn't multiple of the page_size
because mmap() rounds off the memory size to be allocated to next multiple
of page_size.
Fix this by flooring the length to be allocated with mmap() to the
previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different
ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com
Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bpf_mem_alloc() doesn't support zero-sized allocation, so removing these
tests from test_bpf_ma test. After the removal, there will no definition
for bin_data_8, so remove 8 from data_sizes array and adjust the index
of data_btf_ids array in all test cases accordingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231216131052.27621-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test cases to verify the behavior of the MDB bulk deletion
functionality in the VXLAN driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases to verify the behavior of the MDB bulk deletion
functionality in the bridge driver.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is error log when htab-mem benchmark completes. The error log
looks as follows:
$ ./bench htab-mem -d1
Setting up benchmark 'htab-mem'...
Benchmark 'htab-mem' started.
......
(cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2
Fix it by closing cgrp fd before invoking cleanup_cgroup_environment().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231219135727.2661527-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test validating that freplace'ing another main (entry) BPF program
fails if the target BPF program doesn't have valid/expected func proto BTF.
We extend fexit_bpf2bpf test to allow to specify expected log message
for negative test cases (where freplace program is expected to fail to
load).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove duplicated BTF parsing logic when it comes to subprog call check.
Instead, use (potentially cached) results of btf_prepare_func_args() to
abstract away expectations of each subprog argument in generic terms
(e.g., "this is pointer to context", or "this is a pointer to memory of
size X"), and then use those simple high-level argument type
expectations to validate actual register states to check if they match
expectations.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of btf_check_subprog_arg_match(), use btf_prepare_func_args()
logic to validate "trustworthiness" of main BPF program's BTF information,
if it is present.
We ignored results of original BTF check anyway, often times producing
confusing and ominously-sounding "reg type unsupported for arg#0
function" message, which has no apparent effect on program correctness
and verification process.
All the -EFAULT returning sanity checks are already performed in
check_btf_info_early(), so there is zero reason to have this duplication
of logic between btf_check_subprog_call() and btf_check_subprog_arg_match().
Dropping btf_check_subprog_arg_match() simplifies
btf_check_func_arg_match() further removing `bool processing_call` flag.
One subtle bit that was done by btf_check_subprog_arg_match() was
potentially marking main program's BTF as unreliable. We do this
explicitly now with a dedicated simple check, preserving the original
behavior, but now based on well factored btf_prepare_func_args() logic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add testcase for the logic that the verifier tracks the BPF_JNE for regs.
The assembly function "reg_not_equal_const()" and "reg_equal_const" that
we add is exactly converted from the following case:
u32 a = bpf_get_prandom_u32();
u64 b = 0;
a %= 8;
/* the "a > 0" here will be optimized to "a != 0" */
if (a > 0) {
/* now the range of a should be [1, 7] */
bpf_skb_store_bytes(skb, 0, &b, a, 0);
}
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-5-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The edge range checking for the registers is supported by the verifier
now, so we can activate the extended logic in
tools/testing/selftests/bpf/prog_tests/reg_bounds.c/range_cond() to test
such logic.
Besides, I added some cases to the "crafted_cases" array for this logic.
These cases are mainly used to test the edge of the src reg and dst reg.
All reg bounds testings has passed in the SLOW_TESTS mode:
$ export SLOW_TESTS=1 && ./test_progs -t reg_bounds -j
Summary: 65/18959832 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-4-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The "S32_MIN" is already defined with s32 casting, so there is no need
to do it again.
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-3-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test for proper driver behavior when the touch confidence bit is set
or cleared. Test the three flavors of touch confidence loss (tipswitch
cleared before confidence, tipswitch and confidence cleared at the same
time, and tipswitch only cleared when touch is actually removed). Also
test two flavors of touch confidence gain (confidence added to a touch
that was "never" confident, and confidence added to a touch that was
previously confident).
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add a test that writes longs strings, some over the size of the sub buffer
and make sure that the entire content is there.
Link: https://lore.kernel.org/linux-trace-kernel/20231213111527.6a4c9b58@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The vec-syscfg selftest verifies that setting the VL of the currently
tested vector type does not disrupt the VL of the other vector type. To do
this it records the current vector length for each type but neglects to
guard this with a check for that vector type actually being supported. Add
one, using a helper function which we also update all the other instances
of this pattern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----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=stU2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is safe to always start with imprecise SCALAR_VALUE register.
Previously __mark_reg_const_zero() relied on caller to reset precise
mark, but it's very error prone and we already missed it in a few
places. So instead make __mark_reg_const_zero() reset precision always,
as it's a safe default for SCALAR_VALUE. Explanation is basically the
same as for why we are resetting (or rather not setting) precision in
current state. If necessary, precision propagation will set it to
precise correctly.
As such, also remove a big comment about forward precision propagation
in mark_reg_stack_read() and avoid unnecessarily setting precision to
true after reading from STACK_ZERO stack. Again, precision propagation
will correctly handle this, if that SCALAR_VALUE register will ever be
needed to be precise.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
Add test for parsing attributes to kunit_tool_test.py. Test checks
attributes are parsed and saved in the test logs.
This test also checks that the attributes have not interfered with the
parsing of other test information, specifically the suite header as
the test plan was being incorrectely parsed.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add parsing of attributes as diagnostic data. Fixes issue with test plan
being parsed incorrectly as diagnostic data when located after
suite-level attributes.
Note that if there does not exist a test plan line, the diagnostic lines
between the suite header and the first result will be saved in the suite
log rather than the first test case log.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We fail to create uprobe if we pass negative offset. Add more tests
validating kernel-side error checking code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231217215538.3361991-3-jolsa@kernel.org
When there is bpf_list_head or bpf_rb_root field in map value, the free
of map btf and the free of map value may run concurrently and there may
be use-after-free problem, so add two test cases to demonstrate it. And
the use-after-free problem can been easily reproduced by using bpf_next
tree and a KASAN-enabled kernel.
The first test case tests the racing between the free of map btf and the
free of array map. It constructs the racing by releasing the array map in
the end after other ref-counter of map btf has been released. To delay
the free of array map and make it be invoked after btf_free_rcu() is
invoked, it stresses system_unbound_wq by closing multiple percpu array
maps before it closes the array map.
The second case tests the racing between the free of map btf and the
free of inner map. Beside using the similar method as the first one
does, it uses bpf_map_delete_elem() to delete the inner map and to defer
the release of inner map after one RCU grace period.
The reason for using two skeletons is to prevent the release of outer
map and inner map in map_in_map_btf.c interfering the release of bpf
map in normal_map_btf.c.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231216035510.4030605-1-houtao@huaweicloud.com
The func_addr used to be NULL for indirect trampolines used by struct_ops.
Now func_addr is a valid function pointer.
Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition.
Fixes: 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
A statement used %d print formatter where %s should have
been used. The same has been fixed in this commit.
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Link: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest")
Link: https://lore.kernel.org/r/20231217080019.1063476-1-ghanshyam1898@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MPC backups tests will skip unexpected sometimes (For example, when
compiling kernel with an older version of gcc, such as gcc-8), since
static functions like mptcp_subflow_send_ack also be listed in
/proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global
function):
> grep "mptcp_subflow_send_ack" /proc/kallsyms
0000000000000000 T __pfx___mptcp_subflow_send_ack
0000000000000000 T __mptcp_subflow_send_ack
0000000000000000 t __pfx_mptcp_subflow_send_ack
0000000000000000 t mptcp_subflow_send_ack
In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"
will be false, MPC backups tests will skip. This is not what we expected.
The correct logic here should be: if mptcp_subflow_send_ack is not a
global function in /proc/kallsyms, do these MPC backups tests. So a 'T'
must be added in front of mptcp_subflow_send_ack.
Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
