IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The GPU clock controller found in SC8180x is a variant of the same block
found in SM8150, but with one additional clock frequency for the
gmu_clk_src clock.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721225329.3035779-1-bjorn.andersson@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add definitions for RPM clocks used on MSM8953 platform.
Signed-off-by: Vladimir Lypak <junak.pub@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Sireesh Kodali <sireeshkodali@protonmail.com>
Link: https://lore.kernel.org/r/QZ0fkozlubDdc7CvqjZPhAviFmjJ28ht7Y4PT3rYM@cp4-web-038.plabs.ch
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add rpm smd clocks, PMIC and bus clocks which are required on
SM4250/6115 for clients to vote on.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210731164827.2756798-2-iskren.chernev@gmail.com
[sboyd@kernel.org: Drop duplicate define, merge with sm6125 support]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As GDSCs are registered and found to be already enabled gdsc_init()
ensures that 1) the kernel state matches the hardware state, and 2)
votable GDSCs are properly enabled from this master as well.
But as the (optional) supply regulator is enabled deep into
gdsc_toggle_logic(), which is only executed for votable GDSCs, the
kernel's state of the regulator might not match the hardware. The
regulator might be automatically turned off if no other users are
present or the next call to gdsc_disable() would cause an unbalanced
regulator_disable().
Given that the votable case deals with an already enabled GDSC, most of
gdsc_enable() and gdsc_toggle_logic() can be skipped. Reduce it to just
clearing the SW_COLLAPSE_MASK and enabling hardware control to simply
call regulator_enable() in both cases.
The enablement of hardware control seems to be an independent property
from the GDSC being enabled, so this is moved outside that conditional
segment.
Lastly, as the propagation of ALWAYS_ON to GENPD_FLAG_ALWAYS_ON needs to
happen regardless of the initial state this is grouped together with the
other sc->pd updates at the end of the function.
Cc: stable@vger.kernel.org
Fixes: 37416e554961 ("clk: qcom: gdsc: Handle GDSC regulator supplies")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721224056.3035016-1-bjorn.andersson@linaro.org
[sboyd@kernel.org: Rephrase commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The earlycon depends on the bootloader setup UART clocks being retained.
There're actually two uart clocks (ipg, per) on MX6QDL,
but the 'Fixes' commit change to register only one which means
another clock may be disabled during booting phase
and result in the earlycon unwork.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 379c9a24cc23 ("clk: imx: Fix reparenting of UARTs not associated with stdout")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210702085438.1988087-1-aisheng.dong@nxp.com
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-7-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-6-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-5-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-rpi-kernel@lists.infradead.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-4-martin.blumenstingl@googlemail.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).
Implement .determine_rate in addition to .round_rate so drivers that are
using clk_divider_{ro_,}ops can benefit from this by default. Keep the
.round_rate callback for now since some drivers rely on
clk_divider_ops.round_rate being implemented.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702225145.2643303-2-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the missing SPDX license header to drivers/clk/clk-palmas.c.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20210731132226.424853-1-wangborong@cdjrlc.com
[sboyd@kernel.org: Also remove boilerplate from comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Fix stm32 clk data to avoid a crash early on
- Fix a randconfig build error in HiSilicon clk driver
- Avoid an oops at boot on Qualcomm MSM8936 SoCs due to an
improper consolidation of structs
- Fix imbalanced disabling of the unused MMC clock on Tegra210
Jetson Nano
- Plug a memory leak in devm_clk_bulk_get_all() unwind path
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmEI+6gRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSVFpw//VmoawOGyRfva5tPojVF9rJMIympxdMHa
jsGcCqDFCH9MBIEszD8oBnocI+J4ejlwVSMRadav2vv8+HcXI2E3GgkYae1J4J/y
dYfyeQNL/VQbObkgXnh+dsCqw84FvuB+LVgLTWZ386BkFPc9brbszf5Jumsy7mQ5
KWvo9eEjlJkbYDCJj3z7I5xSr4ATaFgWTf4UW6pCuTuD4nUY7b4MaOA3rcMHBN/y
bdX3YxfkRkMflHofi63p/P39eHNXbdOFzTxgEK+sYHIu6NxWDBw9Blm7yOER+pIT
voryNw29P8bbe6Fx2eRMXV3LDRLhvIuTE7TzsRMswbydscCdJX/CNrdR572NH684
aL+S/ykcTj15wMfxieIEm2Zq6wDjT6IkRr3NIzbD/BpUKN5JcG9keKoxL3uGYkZd
52mrrBhHPQBRr62aafUThQf/mdCmeFOAPIABAQXyI5xJfwcE5e292npMqQzrcQZz
NgP77d8NI4GQXlJLI/Yc6tR9NC9tY56igU4VG3AAOeUhK/bqLyDJyNeBB+1V63qA
IN/bvfWb89b3Gnsah1zZQZXJPw8Z1xjrQBb1Nj1Ouw5jBlnCn74E/9jTsLc4543b
5P8TW2hnqbf9bFeZhK6yWjY2o+S5ynC7mVS3eos+HUX5F8/TY27bidot3tOv70il
f6LiX1IRb54=
=5bwG
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of clk driver fixes and one core clk API fix:
- Fix stm32 clk data to avoid a crash early on
- Fix a randconfig build error in HiSilicon clk driver
- Avoid an oops at boot on Qualcomm MSM8936 SoCs due to
an improper consolidation of structs
- Fix imbalanced disabling of the unused MMC clock on
Tegra210 Jetson Nano
- Plug a memory leak in devm_clk_bulk_get_all() unwind
path"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fix leak on devm_clk_bulk_get_all() unwind
clk: tegra: Implement disable_unused() of tegra_clk_sdmmc_mux_ops
clk: qcom: smd-rpm: Fix MSM8936 RPM_SMD_PCNOC_A_CLK
clk: hisilicon: hi3559a: select RESET_HISI
clk: stm32f4: fix post divisor setup for I2S/SAI PLLs
Currently, no driver support for DDR memory controller (DMC) is present,
as a result, no driver is explicitly consuming the ddrphy clock. This means
that VPLL1 (parent of ddr clock) will be shutdown if we enable
and then disable any child clock of VPLL1 (e.g. SCLK_I2S0_8CH_TX).
If VPLL1 is disabled, the whole system will freeze, because the DDR
controller will lose its clock. So, it's necessary to prevent VPLL1 from
shutting down, by marking the ddrphy4x CLK_IS_CRITICAL.
This bug was discovered when I was porting rockchip_i2s_tdm driver to
mainline kernel from Rockchip 4.4 kernel. I guess that other Rockchip
SoCs without DMC driver may need the same patch. If this applies to
other devices, please let us know.
Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Link: https://lore.kernel.org/r/BYAPR20MB24886765F888A9705CBEB70789E39@BYAPR20MB2488.namprd20.prod.outlook.com
[adapted subject, changed to add the clock to the critical list]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3036/rk3328 pll types were converted to checking the lock status
via the internal register in january 2020, so don't need the grf
reference since then.
But it was forgotten to remove grf check when deciding between the
pll rate ops (read-only vs. read-write), so a clock driver without
the needed grf reference might've been put into the read-only mode
just because the grf reference was missing.
This affected the rk356x that needs to reclock certain plls at boot.
Fix this by removing the check for the grf for selecting the utilized
operations.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 7f6ffbb885d1 ("clk: rockchip: convert rk3036 pll type to use internal lock status")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
[adjusted the commit message, adjusted the fixes tag]
Link: https://lore.kernel.org/r/20210728180034.717953-3-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The LPT stands for Lynxpoint PCH. However the driver is used on a few
Intel Atom SoCs. Rename it to reflect this in a way how another clock
driver, i.e. clk-pmc-atom, is called.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210722193450.35321-1-andriy.shevchenko@linux.intel.com
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When the body of a case statement is empty, it is well understood that
it is intentional and explicit fallthrough statements are not required.
Drop them.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20210708211645.3621902-1-liambeguin@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
I found that COMMON_CLK_MT8167* do not depend on COMMON_CLK_MT8167,
so it is possible to config:
CONFIG_COMMON_CLK_MT8167=n
CONFIG_COMMON_CLK_MT8167_*=y
Although it does not cause build breaks with such configuration,
I think it is clearer to make COMMON_CLK_MT8167* depend on
COMMON_CLK_MT8167.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210716051732.3422-1-miles.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clock controller has two additional clock source pairs, in order to
support more than a single DisplayPort PHY. List these, so it's possible
to describe them all.
Also drop the unnecessary freq_tbl for the link clock sources, to allow
these parents to be used.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721224610.3035258-1-bjorn.andersson@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Most of subsystem clock providers only need to register clock gates
in their probe() function.
To reduce the duplicated code by add a generic function.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-9-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In all MediaTek PLL design, bit0 of CON0 register is always
the enable bit.
However, there's a special case of usbpll on MT8192.
The enable bit of usbpll is moved to bit2 of other register.
Add configurable en_reg and pll_en_bit for enable control or
default 0 where pll data are static variables.
Hence, CON0_BASE_EN could also be removed.
And there might have another special case on other chips,
the enable bit is still on CON0 register but not at bit0.
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-8-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In fact, the en_mask is a combination of divider enable mask
and pll enable bit(bit0).
Before this patch, we enabled both divider mask and bit0 in prepare(),
but only cleared the bit0 in unprepare().
In the future, we hope en_mask will only be used as divider enable mask.
The enable register(CON0) will be set in 2 steps:
first is divider mask, and then bit0 during prepare(), and vice versa.
But considering backward compatibility, at this stage we allow en_mask
to be a combination or a pure divider enable mask.
And then we will make en_mask a pure divider enable mask in another
following patch series.
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Not all clock providers need to be marked compatible with "syscon"
for system configuration usage, so use device_node_to_regmap() to
skip "syscon" check.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-6-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The psi_ref_clk comes from the C2 node of the main_pll and periph_pll,
not the C3.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk-hi3559a driver uses functions from reset.c so it should
select RESET_HISI to avoid build errors.
Fixes these build errors:
aarch64-linux-ld: drivers/clk/hisilicon/clk-hi3559a.o: in function `hi3559av100_crg_remove':
clk-hi3559a.c:(.text+0x158): undefined reference to `hisi_reset_exit'
aarch64-linux-ld: drivers/clk/hisilicon/clk-hi3559a.o: in function `hi3559av100_crg_probe':
clk-hi3559a.c:(.text+0x1f4): undefined reference to `hisi_reset_init'
aarch64-linux-ld: clk-hi3559a.c:(.text+0x238): undefined reference to `hisi_reset_exit'
Fixes: 6c81966107dc ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lore.kernel.org/r/20210717043159.12566-1-rdunlap@infradead.org
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Enabling the framebuffer leads to a system hang. Running, as a debug
hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c
without taking the console_lock, allows to see the crash backtrace on
the serial line.
~ # echo 0 0 > /sys/class/graphics/fb0/pan
[ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1
[ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.733008] Hardware name: STM32 (Device Tree Support)
[ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28
[ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38
[ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b
[ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4
[ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560
[ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0
[ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8
[ 9.779911] xPSR: 0100000b
[ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.788791] Hardware name: STM32 (Device Tree Support)
[ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc)
[ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c)
The `pll_num' field in the post_div_data configuration contained a wrong
value which also referenced an uninitialized hardware clock when
clk_register_pll_div() was called.
Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Link: https://lore.kernel.org/r/20210725160725.10788-1-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the video clock controller found on SC7280
based devices. This would allow video drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-8-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the graphics clock controller found on SC7280
based devices. This would allow graphics drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-6-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the display clock controller found on SC7280
based devices. This would allow display drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
