IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add the PVR and CPU name to the hardware description, which is printed
at boot and in case of an oops.
eg: Hardware name: ... POWER8E (raw) 0x4b0201
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-2-mpe@ellerman.id.au
Create a hardware description string, which we will use to record
various details of the hardware platform we are running on.
Print the accumulated description at boot, and use it to set the generic
description which is printed in oopses.
To begin with add ppc_md.name, aka the "machine description".
Example output at boot with the full series applied:
Linux version 6.0.0-rc2-gcc-11.1.0-00199-g893f9007a5ce-dirty (michael@alpine1-p1) (powerpc64-linux-gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #844 SMP Thu Sep 29 22:29:53 AEST 2022
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,git-5b4c5a pSeries
printk: bootconsole [udbg0] enabled
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-1-mpe@ellerman.id.au
Powerpc architecture supports 16GB hugetlb pages with hash translation.
For 4K page size, this is implemented as a hugepage directory entry at
PGD level and for 64K it is implemented as a huge page pte at PUD level
With 16GB hugetlb size, offset within a page is greater than 32 bits.
Hence switch to use unsigned long type when using hugepd_shift.
In order to keep things simpler, we make sure we always use unsigned
long type when using hugepd_shift() even though all the hugetlb page
size won't require that.
The hugetlb_free_p*d_range changes are all related to nohash usage where
we can have multiple pgd entries pointing to the same hugepd entries.
Hence on book3s64 where we can have > 4GB hugetlb page size we will
always find more < next even if we compute the value of more correctly.
Hence there is no functional change in this patch except that it fixes
the below warning.
UBSAN: shift-out-of-bounds in arch/powerpc/mm/hugetlbpage.c:499:21
shift exponent 34 is too large for 32-bit type 'int'
CPU: 39 PID: 1673 Comm: a.out Not tainted 6.0.0-rc2-00327-gee88a56e8517-dirty #1
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
ubsan_epilogue+0x18/0x70
__ubsan_handle_shift_out_of_bounds+0x1bc/0x390
hugetlb_free_pgd_range+0x5d8/0x600
free_pgtables+0x114/0x290
exit_mmap+0x150/0x550
mmput+0xcc/0x210
do_exit+0x420/0xdd0
do_group_exit+0x4c/0xd0
sys_exit_group+0x24/0x30
system_call_exception+0x250/0x600
system_call_common+0xec/0x250
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Drop generic change to be sent separately, change 1ULL to 1UL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908072440.258301-1-aneesh.kumar@linux.ibm.com
For both CONFIG_NUMA enabled/disabled use mem_topology_setup() to
update max/min_low_pfn.
This also adds min_low_pfn update to CONFIG_NUMA which was initialized
to zero before. (mpe: Though MEMORY_START is == 0 for PPC64=y which is
all possible NUMA=y systems)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220704063851.295482-1-aneesh.kumar@linux.ibm.com
This function does the hash page table update. Hence rename it to
indicate this better to avoid confusion with flush_pmd_tlb_range()
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Drop unnecessary extern]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220907081941.209501-1-aneesh.kumar@linux.ibm.com
No toolchain we support should be generating stabs debug information
anymore. Drop the sections entirely from our linker scripts.
We removed all the manual stabs annotations in commit
12318163737c ("powerpc/32: Remove remaining .stabs annotations").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220928130951.1732983-1-mpe@ellerman.id.au
The bulk of this was moved/reworded in:
57f266497d81 ("powerpc: Use gas sections for arranging exception vectors")
And now appears around line 700 in arch/powerpc/kernel/exceptions-64s.S.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220928130941.1732818-1-mpe@ellerman.id.au
This used to be about the 0x4300 handler, but that was moved in commit
da2bc4644c75 ("powerpc/64s: Add new exception vector macros").
Note that "STAB" here refers to "Segment Table" not the debug format.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220928130912.1732466-1-mpe@ellerman.id.au
arch/powerpc/kernel/systbl_chk.sh has not been referenced since commit
ab66dcc76d6a ("powerpc: generate uapi header and system call table
files"). Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220929032120.3592593-1-npiggin@gmail.com
Generally the hypervisor decides to allocate a window on different
VAS instances. But if user space wishes to allocate on the current VAS
instance where the process is executing, the kernel has to pass
associativity domain IDs to allocate VAS window HCALL.
To determine the associativity domain IDs for the current CPU,
smp_processor_id() is passed to node associativity HCALL which may
return H_P2 (-55) error during DLPAR CPU event. This is because Linux
CPU numbers (smp_processor_id()) are not the same as the hypervisor's
view of CPU numbers.
Fix the issue by passing hard_smp_processor_id() with
VPHN_FLAG_VCPU flag (PAPR 14.11.6.1 H_HOME_NODE_ASSOCIATIVITY).
Fixes: b22f2d88e435 ("powerpc/pseries/vas: Integrate API with open/close windows")
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Update change log to mention Linux vs HV CPU numbers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/55380253ea0c11341824cd4c0fc6bbcfc5752689.camel@linux.ibm.com
PAPR specifies accumulated virtual processor wait intervals that relate
to partition scheduling interval times. Implement these counters in the
same way as they are repoted by dtl.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-5-npiggin@gmail.com
Kbuild builds init/built-in.a twice; first during the ordinary
directory descending, second from scripts/link-vmlinux.sh.
We do this because UTS_VERSION contains the build version and the
timestamp. We cannot update it during the normal directory traversal
since we do not yet know if we need to update vmlinux. UTS_VERSION is
temporarily calculated, but omitted from the update check. Otherwise,
vmlinux would be rebuilt every time.
When Kbuild results in running link-vmlinux.sh, it increments the
version number in the .version file and takes the timestamp at that
time to really fix UTS_VERSION.
However, updating the same file twice is a footgun. To avoid nasty
timestamp issues, all build artifacts that depend on init/built-in.a
are atomically generated in link-vmlinux.sh, where some of them do not
need rebuilding.
To fix this issue, this commit changes as follows:
[1] Split UTS_VERSION out to include/generated/utsversion.h from
include/generated/compile.h
include/generated/utsversion.h is generated just before the
vmlinux link. It is generated under include/generated/ because
some decompressors (s390, x86) use UTS_VERSION.
[2] Split init_uts_ns and linux_banner out to init/version-timestamp.c
from init/version.c
init_uts_ns and linux_banner contain UTS_VERSION. During the ordinary
directory descending, they are compiled with __weak and used to
determine if vmlinux needs relinking. Just before the vmlinux link,
they are compiled without __weak to embed the real version and
timestamp.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The data storage interrupt (DSI) error will be generated when the
paste operation is issued on the suspended Nest Accelerator (NX)
window due to NX state changes. The hypervisor expects the
partition to ignore this error during page fault handling.
To differentiate DSI caused by an actual HW configuration or by
the NX window, a new “ibm,pi-features” type value is defined.
Byte 0, bit 3 of pi-attribute-specifier-type is now defined to
indicate this DSI error. If this error is not ignored, the user
space can get SIGBUS when the NX request is issued.
This patch adds changes to read ibm,pi-features property and ignore
DSI error during page fault handling if MMU_FTR_NX_DSI is defined.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Mention PAPR version in comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b9cd844b85eb8f70459109ce1b14e44c4cc85fa7.camel@linux.ibm.com
On little endian the stack frame marker appears reversed when dumping
memory sequentially, as is typical in xmon or gdb, eg:
c000000004733e40 0000000000000000 0000000000000000 |................|
c000000004733e50 0000000000000000 0000000000000000 |................|
c000000004733e60 0000000000000000 0000000000000000 |................|
c000000004733e70 5347455200000000 0000000000000000 |SGER............|
c000000004733e80 a700000000000000 708897f7ff7f0000 |........p.......|
c000000004733e90 0073428fff7f0000 208997f7ff7f0000 |.sB..... .......|
c000000004733ea0 0100000000000000 ffffffffffffffff |................|
c000000004733eb0 0000000000000000 0000000000000000 |................|
To make it easier to recognise, reverse the value on little endian, so
it always appears as "REGS", eg:
c000000004733e70 5245475300000000 0000000000000000 |REGS............|
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220927150419.1503001-2-mpe@ellerman.id.au
Now that the stack frame regs marker is only 32-bits it is not as
obvious in memory dumps and easier to miss, eg:
c000000004733e40 0000000000000000 0000000000000000 |................|
c000000004733e50 0000000000000000 0000000000000000 |................|
c000000004733e60 0000000000000000 0000000000000000 |................|
c000000004733e70 7367657200000000 0000000000000000 |sger............|
c000000004733e80 a700000000000000 708897f7ff7f0000 |........p.......|
c000000004733e90 0073428fff7f0000 208997f7ff7f0000 |.sB..... .......|
c000000004733ea0 0100000000000000 ffffffffffffffff |................|
c000000004733eb0 0000000000000000 0000000000000000 |................|
So make it upper case to make it stand out a bit more:
c000000004733e70 5347455200000000 0000000000000000 |SGER............|
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220927150419.1503001-1-mpe@ellerman.id.au
I found a null pointer reference in arch_prepare_kprobe():
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+16' >> kprobe_events
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000050bfc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e #10
NIP: c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc
REGS: c0000000348475b0 TRAP: 0300 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 88002444 XER: 20040006
CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
...
NIP arch_prepare_kprobe+0x10c/0x2d0
LR arch_prepare_kprobe+0xfc/0x2d0
Call Trace:
0xc0000000012f77a0 (unreliable)
register_kprobe+0x3c0/0x7a0
__register_trace_kprobe+0x140/0x1a0
__trace_kprobe_create+0x794/0x1040
trace_probe_create+0xc4/0xe0
create_or_delete_trace_kprobe+0x2c/0x80
trace_parse_run_command+0xf0/0x210
probes_write+0x20/0x40
vfs_write+0xfc/0x450
ksys_write+0x84/0x140
system_call_exception+0x17c/0x3a0
system_call_vectored_common+0xe8/0x278
--- interrupt: 3000 at 0x7fffa5682de0
NIP: 00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000
REGS: c000000034847e80 TRAP: 3000 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 44002408 XER: 00000000
The address being probed has some special:
cmdline_proc_show: Probe based on ftrace
cmdline_proc_show+16: Probe for the next instruction at the ftrace location
The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets
set to NULL. In arch_prepare_kprobe() it will check for:
...
prev = get_kprobe(p->addr - 1);
preempt_enable_no_resched();
if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
...
If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur
with a null pointer reference. At this point prev->addr will not be a
prefixed instruction, so the check can be skipped.
Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn'
to fix this problem.
Fixes: b4657f7650ba ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
[mpe: Trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220923093253.177298-1-lihuafei1@huawei.com
Return the value opal_npu_spa_clear_cache() directly instead of storing
it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220906072006.337099-1-ye.xingchen@zte.com.cn
Return the value vas_register_coproc_api() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220825072657.229168-1-ye.xingchen@zte.com.cn
At boot time, it is not necessary to delay between polls of
cpu_callin_map when waiting for a kicked CPU to come up. Remove the
delay intervals, but preserve the overall deadline (five seconds).
At run time, the first poll result is usually negative and we incur a
sleeping wait. If we spin on the callin word for a short time first,
we can reduce __cpu_up() from dozens of milliseconds to under 1ms in
the common case on a P9 LPAR:
$ ppc64_cpu --smt=off
$ bpftrace -e 'kprobe:__cpu_up {
@start[tid] = nsecs;
}
kretprobe:__cpu_up /@start[tid]/ {
@us = hist((nsecs - @start[tid]) / 1000);
delete(@start[tid]);
}' -c 'ppc64_cpu --smt=on'
Before:
@us:
[16K, 32K) 85 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[32K, 64K) 13 |@@@@@@@ |
After:
@us:
[128, 256) 95 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[256, 512) 3 |@ |
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926220250.157022-1-nathanl@linux.ibm.com
The error injection facility on pseries VMs allows corruption of
arbitrary guest memory, potentially enabling a sufficiently privileged
user to disable lockdown or perform other modifications of the running
kernel via the rtas syscall.
Block the PAPR error injection facility from being opened or called
when locked down.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926131643.146502-3-nathanl@linux.ibm.com
The /proc/powerpc/ofdt interface allows the root user to freely alter
the in-kernel device tree, enabling arbitrary physical address writes
via drivers that could bind to malicious device nodes, thus making it
possible to disable lockdown.
Historically this interface has been used on the pseries platform to
facilitate the runtime addition and removal of processor, memory, and
device resources (aka Dynamic Logical Partitioning or DLPAR). Years
ago, the processor and memory use cases were migrated to designs that
happen to be lockdown-friendly: device tree updates are communicated
directly to the kernel from firmware without passing through untrusted
user space. I/O device DLPAR via the "drmgr" command in powerpc-utils
remains the sole legitimate user of /proc/powerpc/ofdt, but it is
already broken in lockdown since it uses /dev/mem to allocate argument
buffers for the rtas syscall. So only illegitimate uses of the
interface should see a behavior change when running on a locked down
kernel.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926131643.146502-2-nathanl@linux.ibm.com
'extern' keyword is pointless and deprecated for function prototypes.
Signed-off-by: Pali Rohár <pali@kernel.org>
Suggested-by: Gabriel Paubert <paubert@iram.es>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220822231751.16973-1-pali@kernel.org
uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827134454.17365-1-pali@kernel.org
There are still some board device tree files without Power ISA properties
which have Freescale e500v1 cores, namely those which are based on
Freescale mpc8540, mpc8541, mpc8555 and mpc8560 processors.
So include newly introduced e500v1_power_isa.dtsi file in devices tree
files with those processors.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902212103.22534-2-pali@kernel.org
Commit 2eb28006431c ("powerpc/e500v2: Add Power ISA properties to comply
with ePAPR 1.1") introduced new include file e500v2_power_isa.dtsi and
should have used it for all e500v2 platforms. But apparently it was used
also for e500v1 platforms mpc8540, mpc8541, mpc8555 and mpc8560.
e500v1 cores compared to e500v2 do not support double precision floating
point SPE instructions. Hence power-isa-sp.fd should not be set on e500v1
platforms, which is in e500v2_power_isa.dtsi include file.
Fix this issue by introducing a new e500v1_power_isa.dtsi include file and
use it in all e500v1 device tree files.
Fixes: 2eb28006431c ("powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902212103.22534-1-pali@kernel.org
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type
ie branch filters are supported. The branch filters are requested via
event attribute "branch_sample_type". Multiple branch filters can be
passed in event attribute. eg:
$ perf record -b -o- -B --branch-filter any,ind_call true
None of the Power PMUs support having multiple branch filters at
the same time. Branch filters for branch stack sampling is set via MMCRA
IFM bits [32:33]. But currently when requesting for multiple filter
types, the "perf record" command does not report any error.
eg:
$ perf record -b -o- -B --branch-filter any,save_type true
$ perf record -b -o- -B --branch-filter any,ind_call true
The "bhrb_filter_map" function in PMU driver code does the validity
check for supported branch filters. But this check is done for single
filter. Hence "perf record" will proceed here without reporting any
error.
Fix power_pmu_event_init() to return EOPNOTSUPP when multiple branch
filters are requested in the event attr.
After the fix:
$ perf record --branch-filter any,ind_call -- ls
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Tweak comment and change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921145255.20972-1-atrajeev@linux.vnet.ibm.com
Ensure r13 is zero from very early in boot until it gets set to the
boot paca pointer. This allows early program and mce handlers to halt
if there is no valid paca, rather than potentially run off into the
weeds. This preserves register and memory contents for low level
debugging tools.
Nothing could be printed to console at this point in any case because
even udbg is only set up after the boot paca is set, so this shouldn't
be missed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-6-npiggin@gmail.com
The idea is to get to the point where if r13 is non-zero, then it should
contain a reasonable paca. This can be used in early boot program check
and machine check handlers to avoid running off into the weeds if they
hit before r13 has a paca.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-5-npiggin@gmail.com
relocate() uses r13 in early boot before it is used for the paca. Use
a different register for this so r13 is kept unchanged until it is
set to the paca pointer.
Avoid r14 as well while we're here, there's no reason not to use the
volatile registers which is a bit less surprising, and r14 could be used
as another fixed reg one day.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-4-npiggin@gmail.com
Use the early boot interrupt fixup in the machine check handler to allow
the machine check handler to run before interrupt endian is set up.
Branch to an early boot handler that just does a basic crash, which
allows it to run before ppc_md is set up. MSR[ME] is enabled on the boot
CPU earlier, and the machine check stack is temporarily set to the
middle of the init task stack.
This allows machine checks (e.g., due to invalid data access in real
mode) to print something useful earlier in boot (as soon as udbg is set
up, if CONFIG_PPC_EARLY_DEBUG=y).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-3-npiggin@gmail.com
In preparation for using this sequence in machine check interrupt, move
it into a macro, with a small change to make it position independent.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926055620.2676869-2-npiggin@gmail.com
The interrupt entry code carefully saves a minimal number of registers,
so in some places the TOC is required, it is loaded into a different
register, so provide a macro that can supply an alternate TOC register.
This continues to use got addressing because TOC-relative results in
"got/toc optimization is not supported" messages by the linker. Having
r2 be one of the saved registers and using that for TOC addressing may
be the best way to avoid that and switch this to TOC addressing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-6-npiggin@gmail.com
A later change stops the kernel using r2 and loads it with a poison
value. Provide a PACATOC loading abstraction which can hide this
detail.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-5-npiggin@gmail.com
Use helper macros to access global variables, and place them in .data
sections rather than in .toc. Putting addresses in TOC is not required
because the kernel is linked with a single TOC.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-3-npiggin@gmail.com
Using a 32-bit constant for this marker allows it to be loaded with
two ALU instructions, like 32-bit. This avoids a TOC entry and a
TOC load that depends on the r2 value that has just been loaded from
the PACA.
This changes the value for 32-bit as well, so both have the same
value in the low 4 bytes and 64-bit has 0 in the top bytes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-2-npiggin@gmail.com
When the migration is initiated, the hypervisor changes VAS
mappings as part of pre-migration event. Then the OS gets the
migration event which closes all VAS windows before the migration
starts. NX generates continuous faults until windows are closed
and the user space can not differentiate these NX faults coming
from the actual migration. So to reduce this time window, close
VAS windows first in pseries_migrate_partition().
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d8efade91dda831c9ed4abb226dab627da594c5f.camel@linux.ibm.com
irq replay is quite complicated because of softirq processing which
itself enables and disables irqs. Several considerations need to be
accounted for due to this, and they are not clearly documented.
Refactor the irq replay code a bit to tidy and deduplicate some common
functions. Add comments, debug checks.
This has a minor functional change that irq tracing enable/disable is
done after each interrupt replayed, rather than after a batch. It also
re-sets state to IRQS_ALL_DISABLED after an interrupt, which doesn't
matter much because interrupts are hard disabled at this point, but it
is more consistent with how interrupt handlers are called.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-8-npiggin@gmail.com
BUG/WARN are handled with a program interrupt which can turn into an
infinite recursion when there are bugs in interrupt handler entry
(which can be irritated by bugs in other parts of the code).
There is one feeble attempt to avoid this recursion, but it misses
several cases. Make a tidier macro for this and switch most bugs in
the interrupt entry wrapper over to use it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-7-npiggin@gmail.com
Prior changes eliminated cases of masked PACA_IRQ_MUST_HARD_MASK
interrupts that re-fire due to MSR[EE] being enabled while they are
pending. Add a debug check in the masked interrupt handler to catch
if this occurs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-6-npiggin@gmail.com
When irqs are soft-disabled, MSR[EE] is volatile and can change from
1 to 0 asynchronously (if a PACA_IRQ_MUST_HARD_MASK interrupt hits).
So it can not be used to check hard IRQ enabled status, except to
confirm it is disabled.
ppc64_runlatch_on/off functions use MSR this way to decide whether to
re-enable MSR[EE] after disabling it, which leads to MSR[EE] being
enabled when it shouldn't be (when a PACA_IRQ_MUST_HARD_MASK had
disabled it between reading the MSR and clearing EE).
This has been tolerated in the kernel previously, and it doesn't seem
to cause a problem, but it is unexpected and may trip warnings or cause
other problems as we tighten up this state management. Fix this by only
re-enabling if PACA_IRQ_HARD_DIS is clear.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-5-npiggin@gmail.com
If a synchronous interrupt (e.g., hash fault) is taken inside an
irqs-disabled region which has MSR[EE]=1, then an asynchronous interrupt
that is PACA_IRQ_MUST_HARD_MASK (e.g., PMI) is taken inside the
synchronous interrupt handler, then the synchronous interrupt will
return with MSR[EE]=1 and the asynchronous interrupt fires again.
If the asynchronous interrupt is a PMI and the original context does not
have PMIs disabled (only Linux IRQs), the asynchronous interrupt will
fire despite having the PMI marked soft pending. This can confuse the
perf code and cause warnings.
This patch changes the interrupt return so that irqs-disabled MSR[EE]=1
contexts will be returned to with MSR[EE]=0 if a PACA_IRQ_MUST_HARD_MASK
interrupt has become pending in the meantime.
The longer explanation for what happens:
1. local_irq_disable()
2. Hash fault interrupt fires, do_hash_fault handler runs
3. interrupt_enter_prepare() sets IRQS_ALL_DISABLED
4. interrupt_enter_prepare() sets MSR[EE]=1
5. PMU interrupt fires, masked handler runs
6. Masked handler marks PMI pending
7. Masked handler returns with PACA_IRQ_HARD_DIS set, MSR[EE]=0
8. do_hash_fault interrupt return handler runs
9. interrupt_exit_kernel_prepare() clears PACA_IRQ_HARD_DIS
10. interrupt returns with MSR[EE]=1
11. PMU interrupt fires, perf handler runs
Fixes: 4423eb5ae32e ("powerpc/64/interrupt: make normal synchronous interrupts enable MSR[EE] if possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-4-npiggin@gmail.com
This prevents interrupts in early boot (e.g., program check) from
enabling MSR[EE], potentially causing endian mismatch or other
crashes when reporting early boot traps.
Fixes: 4423eb5ae32ec ("powerpc/64/interrupt: make normal synchronous interrupts enable MSR[EE] if possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-3-npiggin@gmail.com
Commit 171476775d32 ("context_tracking: Convert state to atomic_t")
added a CONTEXT_IDLE state which can be encountered by interrupts from
kernel mode in the idle thread, causing a false positive warning.
Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-2-npiggin@gmail.com
