IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Initialising global and static variables to 0 is unnecessary. Remove the
initialisation.
Link: https://lore.kernel.org/r/20220723091620.5463-1-wangborong@cdjrlc.com
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During system shutdown or reboot, mpt3sas will reset the firmware back to
ready state. However, the driver leaves running a watchdog work item
intended to keep the firmware in operational state. This causes a second,
unneeded reset on shutdown and moves the firmware back to operational
instead of in ready state as intended. And if the mpt3sas_fwfault_debug
module parameter is set, this extra reset also panics the system.
mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the
firmware back to ready state.
Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com
Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown")
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a comment about limiting the default the SCSI disk request_queue
max_sectors initial value to that of the SCSI host optimal sectors limit.
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.
For performance reasons set the request queue max_sectors from
dma_opt_mapping_size(), which knows this mapping limit.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.
New member Scsi_Host.opt_sectors is added, which is the optimal host
max_sectors, and use this value to cap the request queue max_sectors when
set.
It could be considered to have request queues io_opt value initially
set at Scsi_Host.opt_sectors in __scsi_init_queue(), but that is not
really the purpose of io_opt.
Finally, even though Scsi_Host.opt_sectors value should never be greater
than the request queue max_hw_sectors value, continue to limit to this
value for safety.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The shost->max_sectors is repeatedly capped according to the host DMA
mapping limit for each sdev in __scsi_init_queue(). This is unnecessary, so
set only once when adding the host.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently if a phy reset or enable phy is issued via sysfs when controller
is suspended, those operations will be ignored as SAS_HA_REGISTERED is
cleared. If RPM is enabled then we may aggressively suspend automatically.
In this case it may be difficult to enable or reset a phy via sysfs, so
resume the host in these scenarios.
Link: https://lore.kernel.org/r/1657823002-139010-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the I/O completion response frame returned by the target device has been
written to the host memory and the err bit in the status field of the
received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will
let EH analyze and further determine cause of failure.
Link: https://lore.kernel.org/r/1657823002-139010-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently SMP tasks are DMA unmapped only when cq of SMP I/O is returned
normally. If the cq of SMP I/O is returned with exception actually SMP TAS
is never unmapped. Relocate DMA unmap of SMP task to fix the issue.
Link: https://lore.kernel.org/r/1657823002-139010-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use slot->n_elem to store the return value of dma_map_sg() for SSP and SMP
IOs, and remove unnecessary variable n_elem_req.
Link: https://lore.kernel.org/r/1657823002-139010-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is duplicated code between slave_configure_v3_hw() and
hisi_sas_slave_configure(), so call common function
hisi_sas_slave_configure() from slave_configure_v3_hw().
Link: https://lore.kernel.org/r/1657823002-139010-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This code is indented one more tab than it should be.
Link: https://lore.kernel.org/r/YtVCFshEJNC7ELid@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is some clean up necessary before returning. Smatch complains:
drivers/scsi/mpi3mr/mpi3mr_fw.c:4786 mpi3mr_soft_reset_handler()
warn: inconsistent returns '&mrioc->reset_mutex'.
Locked on : 4730
Unlocked on: 4786
Link: https://lore.kernel.org/r/YtVCEsxMU8buuMjP@kili
Fixes: f10af057325c ("scsi: mpi3mr: Resource Based Metering")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reduce the VD queue depth on detecting the throttling condition.
[mkp: incorporate fix for pointer cast issue reported by the test
robot and Guenter Roeck]
Link: https://lore.kernel.org/r/20220708195020.8323-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver to track cumulative pending large data size at the controller
level and at the throttle group level. When one of the values meet or
exceed the controller's firmware-determined high threshold value, then the
driver will divert future selective I/O to the firmware. Once both
controller level and at the throttle group level cumulative pending large
data size reach controller's firmware determined low threshold value, then
the driver will stop diverting I/Os to the firmware.
Link: https://lore.kernel.org/r/20220708195020.8323-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read.
Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com
Cc: <stable@vger.kernel.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
vref_count took an extra decrement in the task management path. Add an
extra ref count to compensate the imbalance.
Link: https://lore.kernel.org/r/20220713052045.10683-7-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes IKE message being dropped due to error in processing Purex
IOCB and Continuation IOCBs.
Link: https://lore.kernel.org/r/20220713052045.10683-6-njavali@marvell.com
Fixes: fac2807946c1 ("scsi: qla2xxx: edif: Add extraction of auth_els from the wire")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some platforms, the current logic of relying on finding new packet
solely based on signature pattern can lead to driver reading stale
packets. Though this is a bug in those platforms, reduce such exposures by
limiting reading packets until the IN pointer.
Two module parameters are introduced:
ql2xrspq_follow_inptr:
When set, on newer adapters that has queue pointer shadowing, look for
response packets only until response queue in pointer.
When reset, response packets are read based on a signature pattern
logic (old way).
ql2xrspq_follow_inptr_legacy:
Like ql2xrspq_follow_inptr, but for those adapters where there is no
queue pointer shadowing.
Link: https://lore.kernel.org/r/20220713052045.10683-5-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While requesting a new mailbox command, driver does not write any data to
unused registers. Initialize the unused register value to zero while
requesting a new mailbox command to prevent stale entry access by firmware.
Link: https://lore.kernel.org/r/20220713052045.10683-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes the regression of NVMe discovery failure during driver load
time.
This reverts commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99.
Link: https://lore.kernel.org/r/20220713052045.10683-2-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve static type checking by using the new blk_opf_t type for variables
that represent request flags.
Cc: Hannes Reinecke <hare@suse.com>
Cc: Martin Wilck <mwilck@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-43-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for arguments and variables that represent
request flags. Use the !! operator in scsi_noretry_cmd() to convert the
blk_opf_t type into a boolean. This patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-42-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch prepares for introducing the new blk_opf_t type in the SCSI core.
Since the value returned by scsi_noretry_cmd() is only used in boolean
expressions, this patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-41-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for the
combination of a request operation and its flags.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-40-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf090d ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/165730608687.177165.11815510982277242966.stgit@brunhilda
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyright to current year.
Link: https://lore.kernel.org/r/165730608177.177165.13184715486635363193.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow user to override the default driver timeout for controller ready.
There are some rare configurations which require the driver to wait longer
than the normal 3 minutes for the controller to complete its bootup
sequence and be ready to accept commands from the driver.
The module parameter is:
ctrl_ready_timeout= { 0 | 30-1800 }
and specifies the timeout in seconds for the driver to wait for controller
ready. The valid range is 0 or 30-1800. The default value is 0, which
causes the driver to use a timeout of 180 seconds (3 minutes).
Link: https://lore.kernel.org/r/165730607666.177165.9221211345284471213.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change removing a LUN using sysfs from an internal driver function
pqi_remove_all_scsi_devices() to using the .slave_destroy entry in the
scsi_host_template.
A LUN can be deleted via sysfs using this syntax:
echo 1 > /sys/block/sdX/device/delete
Link: https://lore.kernel.org/r/165730607154.177165.9723066932202995774.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow SMP affinity to be changeable by disabling managed interrupts.
On distributions where the driver is enabled for multi-queue support the
driver utilizes kernel managed interrupts, which automatically distributes
interrupts to all available CPUs and assigns SMP affinity.
On most distributions, the affinity can not be changed by the user.
This change will allow managed interrupts to be disabled by the user via a
module parameter while still allowing multi-queue support to function
properly.
Use the module parameter disable_managed_interrupts=1
Link: https://lore.kernel.org/r/165730606638.177165.12846020942931640329.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a rare stale RAID map access when performing AIO during a RAID
configuration change.
A race condition in the driver could cause it to access a stale RAID map
when a logical volume is reconfigured.
Modify the driver logic to invalidate a RAID map very early when a RAID
configuration change is detected and only switch to a new RAID map after
the driver detects that the RAID map has changed.
Link: https://lore.kernel.org/r/165730606128.177165.7671413443814750829.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a SOP READ and WRITE DMA flags for some requests.
This update corrects DMA direction issues with SCSI commands removed from
the controller's internal lookup table.
Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller
lookup table and exposed a DMA direction flag issue.
SCSI READ BLOCK LIMITS was recently removed from our controller lookup
table so the controller uses the respective IU flag field to set the DMA
data direction. Since the DMA direction is incorrect the FW never completes
the request causing a hang.
Some SCSI commands which use SCSI READ BLOCK LIMITS
* sg_map
* mt -f /dev/stX status
After updating controller firmware, users may notice their tape units
failing. This patch resolves the issue.
Also, the AIO path DMA direction is correct.
The DMA direction flag is a day-one bug with no reported BZ.
Fixes: 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver")
Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change method used to detect controller firmware crash during PQI reset.
PQI reset can fail with error -6 if firmware takes > 100ms to complete
reset.
Method used by driver to detect controller firmware crash during PQI was
incorrect in some cases.
Link: https://lore.kernel.org/r/165730605108.177165.1132931838384767071.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the PCI ID for (values in hex):
VID / DID / SVID / SDID
---- ---- ---- ----
Adaptec SmartHBA 2100-8i-o 9005 / 0285 / 9005 / 0659
Link: https://lore.kernel.org/r/165730604089.177165.17257514581321583667.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fail all outstanding requests after a PCI linkdown.
Block access to device SCSI attributes during the following conditions:
"Cable pull" is called PQI_CTRL_SURPRISE_REMOVAL.
"PCIe Link Down" is called PQI_CTRL_GRACEFUL_REMOVAL.
Block access to device SCSI attributes during and in rare instances when
the controller goes offline.
Either outstanding requests or the access of SCSI attributes post linkdown
can lead to a hang.
Post linkdown, driver does not fail the outstanding requests leading to
long wait time before all the IOs eventually fail.
Also access of the SCSI attributes by host applications can lead to a
system hang.
Link: https://lore.kernel.org/r/165730603578.177165.4699352086827187263.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add driver support for up to 256 LUNs per device.
Update AIO path to pass the appropriate LUN number for base-code to target
the correct LUN.
Update RAID IO path to pass the appropriate LUN number for FW to target the
correct LUN.
Pass the correct LUN number while doing a LUN reset.
Count the outstanding commands based on LUN number. While removing a
Multi-LUN device, wait for all outstanding commands to complete for all
LUNs.
Add Feature bit support.
Link: https://lore.kernel.org/r/165730603067.177165.14016422176841798336.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kumar Meiyappan <Kumar.Meiyappan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Insert a minimum 1 millisecond delay after writing to a register before
reading from it.
SIS and PQI registers that can be both written to and read from can return
stale data if read from too soon after having been written to.
There is no read/write ordering or hazard detection on the inbound path to
the MSGU from the PCIe bus, therefore reads could pass writes.
Link: https://lore.kernel.org/r/165730602555.177165.11181012469428348394.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Co-developed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print controller firmware version to OS message log during driver
initialization or after OFA.
Link: https://lore.kernel.org/r/165730601536.177165.17698744242908911822.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Check the response code returned from the LUN reset task management
function and if it indicates the LUN is not valid, do not retry.
Reduce rescan worker delay to 5 seconds for the event handler only.
The removal of a drive from the OS could have been delayed up to 30 seconds
after being physically pulled.
The driver was retrying a LUN reset 3 times even though the return code
indiciated the LUN was no longer valid. There was a 10 second delay between
each retry. Additionally, the rescan worker was scheduled to run 10 seconds
after the driver received the event.
Link: https://lore.kernel.org/r/165730601025.177165.9416869335174437006.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Negotiated link rate needs to be updated to 'Disabled' when phy is stopped.
Link: https://lore.kernel.org/r/20220708205026.969161-1-changyuanl@google.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
