IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace.
Fixes: 3c79107631db ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id")
Reported-by: zdi-disclosures@trendmicro.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Summary
* Remove "->procname == NULL" check when iterating through sysctl table arrays
Removing sentinels in ctl_table arrays reduces the build time size and
runtime memory consumed by ~64 bytes per array. With all ctl_table
sentinels gone, the additional check for ->procname == NULL that worked in
tandem with the ARRAY_SIZE to calculate the size of the ctl_table arrays is
no longer needed and has been removed. The sysctl register functions now
returns an error if a sentinel is used.
* Preparation patches for sysctl constification
Constifying ctl_table structs prevents the modification of proc_handler
function pointers as they would reside in .rodata. The ctl_table arguments
in sysctl utility functions are const qualified in preparation for a future
treewide proc_handler argument constification commit.
* Misc fixes
Increase robustness of set_ownership by providing sane default ownership
values in case the callee doesn't set them. Bound check proc_dou8vec_minmax
to avoid loading buggy modules and give sysctl testing module a name to
avoid compiler complaints.
Testing
* This got push to linux-next in v6.10-rc2, so it has had more than a month
of testing
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmaWdz4ACgkQupfNUreW
QU/WKQwAkSuUz42yCQye77BK+Z8ANcTF1f3aI/wfv2nahq1GaSrNBpqUiXvEe9Tt
KD2lM1PWiQfizVLIDPh96yxa5q69GQrPPOA/V1jwIXmk/HRpjjoONCFNNXVRCTls
VCqDz/RatuXvzO35Yn87MnWnxv6PiX7X/zq/3WikVsUI381kvTgC6OwZxdFM52w4
ESwOa3LeOovtRnqV5dpHr6DCQKyd0N52nPxgXvaerjlsJsv7PlezN7z9YyLOOfmW
xUD7X6LQcJq7HcEukaB6I9o2GQOi4yYXL2YOzed7qu9Thu+lasEoN3Bd7P+ilXkc
JY6EXJ5o+d69PewKRuJ1QvD7wrHIkhNMNbMtvehNay124wAHDy3KtonFzyvlX4wE
qCHBYc6rySJNhSqwVp9MoksOZfDM99pVIOs9YVIjc90Zzu5J7tORgYWRVOHTcAtj
fd8nMdkK3+ZANapygFCyew6GueIzaqlQwveVgLGw4vc5L3ClknmURit3y487Pzdg
B+BEVlsp
=bs2G
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove "->procname == NULL" check when iterating through sysctl table
arrays
Removing sentinels in ctl_table arrays reduces the build time size
and runtime memory consumed by ~64 bytes per array. With all
ctl_table sentinels gone, the additional check for ->procname == NULL
that worked in tandem with the ARRAY_SIZE to calculate the size of
the ctl_table arrays is no longer needed and has been removed. The
sysctl register functions now returns an error if a sentinel is used.
- Preparation patches for sysctl constification
Constifying ctl_table structs prevents the modification of
proc_handler function pointers as they would reside in .rodata. The
ctl_table arguments in sysctl utility functions are const qualified
in preparation for a future treewide proc_handler argument
constification commit.
- Misc fixes
Increase robustness of set_ownership by providing sane default
ownership values in case the callee doesn't set them. Bound check
proc_dou8vec_minmax to avoid loading buggy modules and give sysctl
testing module a name to avoid compiler complaints.
* tag 'sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Warn on an empty procname element
sysctl: Remove ctl_table sentinel code comments
sysctl: Remove "child" sysctl code comments
sysctl: Remove superfluous empty allocations from sysctl internals
sysctl: Replace nr_entries with ctl_table_size in new_links
sysctl: Remove check for sentinel element in ctl_table arrays
mm profiling: Remove superfluous sentinel element from ctl_table
locking: Remove superfluous sentinel element from kern_lockdep_table
sysctl: Add module description to sysctl-testing
sysctl: constify ctl_table arguments of utility function
utsname: constify ctl_table arguments of utility function
sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array
sysctl: always initialize i_uid/i_gid
Replace the deprecated[1] uses of strncpy() in tcp_ca_get_name_by_key()
and tcp_get_default_congestion_control(). The callers use the results as
standard C strings (via nla_put_string() and proc handlers respectively),
so trailing padding is not needed.
Since passing the destination buffer arguments decays it to a pointer,
the size can't be trivially determined by the compiler. ca->name is
the same length in both cases, so strscpy() won't fail (when ca->name
is NUL-terminated). Include the length explicitly instead of using the
2-argument strscpy().
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240714041111.it.918-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmaTgusQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpr+1EAC4I7pRAM341sfmhe/9QQKMM8VzGwy5Tlr1
AFLO3BujRTl6X8S9fQjIjN1coW6u4F42I19+vVlxqvB7CUnqt9VWpexEjxe4K0FR
R+hIZW+fWV9K/eMrcsLcI7oReN5kIihHOzzy3wz0rENoGB5dCl6JAZMHDUCSqP0/
ZJJQ5ut8ah20Y/myHnzP5o4TfdE7nGo73Di2YoE2g3KqeX/dlAKW9+5hqKzzrHhM
2U25k/6KLy0ROzKpy2qW0QRE3pT5udoHLK2ue9+XwXF8JWVTlfVkHBzGY7NstyyT
z07SEzW1q4xV1HdCwGDAU7cL2NJMRXSG0p2WZTm8QyaVTdsZQvEx08GLsVdLvFH5
Gg+oOaxVE+INzW+/Lwz7lFHgq6XEjdAlEAOXDtGkZoni6Rt6iCzFCW6RTf/guy8o
Cub7tatMyegxai9+FTN/oFVoydRR0tsMf0OHrWnLOperh9CaxAwXvmKFeT/UTwiB
KIuIOJop7aThJbiV42a/xwTrEjNMZRv6uVBBEtJX3rxpmIhqTbjcAv9rKMmgtLMk
s6yX1MvYdOLhhEDyoUBX0dJdEETBf3KbnYIwi8kb4Sbkw/ZDgnkmSxFysom61wUF
byAFEpah3ZFR8aES0uNKUE6UHK6i5qqp0Za/n6gA927E/WGCU9ndaS+01gyknog0
8FqFYwruHQ==
=50CO
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Here are the io_uring updates queued up for 6.11.
Nothing major this time around, various minor improvements and
cleanups/fixes. This contains:
- Add bind/listen opcodes. Main motivation is to support direct
descriptors, to avoid needing a regular fd just for doing these two
operations (Gabriel)
- Probe fixes (Gabriel)
- Treat io-wq work flags as atomics. Not fixing a real issue, but may
as well and it silences a KCSAN warning (me)
- Cleanup of rsrc __set_current_state() usage (me)
- Add 64-bit for {m,f}advise operations (me)
- Improve performance of data ring messages (me)
- Fix for ring message overflow posting (Pavel)
- Fix for freezer interaction with TWA_NOTIFY_SIGNAL. Not strictly an
io_uring thing, but since TWA_NOTIFY_SIGNAL was originally added
for faster task_work signaling for io_uring, bundling it with this
pull (Pavel)
- Add Pavel as a co-maintainer
- Various cleanups (me, Thorsten)"
* tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux: (28 commits)
io_uring/net: check socket is valid in io_bind()/io_listen()
kernel: rerun task_work while freezing in get_signal()
io_uring/io-wq: limit retrying worker initialisation
io_uring/napi: Remove unnecessary s64 cast
io_uring/net: cleanup io_recv_finish() bundle handling
io_uring/msg_ring: fix overflow posting
MAINTAINERS: change Pavel Begunkov from io_uring reviewer to maintainer
io_uring/msg_ring: use kmem_cache_free() to free request
io_uring/msg_ring: check for dead submitter task
io_uring/msg_ring: add an alloc cache for io_kiocb entries
io_uring/msg_ring: improve handling of target CQE posting
io_uring: add io_add_aux_cqe() helper
io_uring: add remote task_work execution helper
io_uring/msg_ring: tighten requirement for remote posting
io_uring: Allocate only necessary memory in io_probe
io_uring: Fix probe of disabled operations
io_uring: Introduce IORING_OP_LISTEN
io_uring: Introduce IORING_OP_BIND
net: Split a __sys_listen helper for io_uring
net: Split a __sys_bind helper for io_uring
...
Merge in late fixes to prepare for the 6.11 net-next PR.
Conflicts:
93c3a96c301f ("net: pse-pd: Do not return EOPNOSUPP if config is null")
4cddb0f15ea9 ("net: ethtool: pse-pd: Fix possible null-deref")
30d7b6727724 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure to set encapsulated control flags also for non-IP
packets, such that it's possible to allow matching on e.g.
TUNNEL_OAM on a geneve packet carrying a non-IP packet.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-13-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that TCA_FLOWER_KEY_ENC_FLAGS is unused, as it's
former data is stored behind TCA_FLOWER_KEY_ENC_CONTROL,
then remove the last bits of FLOW_DISSECTOR_KEY_ENC_FLAGS.
FLOW_DISSECTOR_KEY_ENC_FLAGS is unreleased, and have been
in net-next since 2024-06-04.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-12-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes how TCA_FLOWER_KEY_ENC_FLAGS is used, so that
it is used with TCA_FLOWER_KEY_FLAGS_* flags, in the same way as
TCA_FLOWER_KEY_FLAGS is currently used.
Where TCA_FLOWER_KEY_FLAGS uses {key,mask}->control.flags, then
TCA_FLOWER_KEY_ENC_FLAGS now uses {key,mask}->enc_control.flags,
therefore {key,mask}->enc_flags is now unused.
As the generic fl_set_key_flags/fl_dump_key_flags() is used with
encap set to true, then fl_{set,dump}_key_enc_flags() is removed.
This breaks unreleased userspace API (net-next since 2024-06-04).
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-10-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare to set and dump the tunnel flags.
This code won't see any of these flags yet, as these flags
aren't allowed by the NLA_POLICY_MASK, and the functions
doesn't get called with encap set to true yet.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-9-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the new FLOW_DIS_F_TUNNEL_* encapsulated control flags, based
on if their counter-part is set in tun_flags.
These flags are not userspace visible yet, as the code to dump
encapsulated control flags will first be added, and later activated
in the following patches.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-8-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename skb_flow_dissect_set_enc_addr_type() to
skb_flow_dissect_set_enc_control(), and make it set both
addr_type and flags in FLOW_DISSECTOR_KEY_ENC_CONTROL.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-7-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This policy guards fl_set_key_flags() from seeing flags
not used in the context of TCA_FLOWER_KEY_FLAGS.
In order For the policy check to be performed with the
correct endianness, then we also needs to change the
attribute type to NLA_BE32 (Thanks Davide).
TCA_FLOWER_KEY_FLAGS{,_MASK} already has a be32 comment
in include/uapi/linux/pkt_cls.h.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-6-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare fl_set_key_flags/fl_dump_key_flags() for use with
TCA_FLOWER_KEY_ENC_FLAGS{,_MASK}.
This patch adds an encap argument, similar to fl_set_key_ip/
fl_dump_key_ip(), and determine the flower keys based on the
encap argument, and use them in the rest of the two functions.
Since these functions are so far, only called with encap set false,
then there is no functional change.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-5-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct llc_sap_state_trans' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
339 456 24 819 333 net/llc/llc_s_st.o
After:
=====
text data bss dec hex filename
683 144 0 827 33b net/llc/llc_s_st.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/9d17587639195ee94b74ff06a11ef97d1833ee52.1720973710.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct llc_conn_state_trans' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
13923 10896 32 24851 6113 net/llc/llc_c_st.o
After:
=====
text data bss dec hex filename
21859 3328 0 25187 6263 net/llc/llc_c_st.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/87cda89e4c9414e71d1a54bb1eb491b0e7f70375.1720973029.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
-----BEGIN PGP SIGNATURE-----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=rQ2W
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
* tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits)
Bluetooth: btmtk: Mark all stub functions as inline
Bluetooth: hci_qca: Fix build error
Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
Bluetooth: hci_qca: make pwrseq calls the default if available
Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
Bluetooth: hci_qca: schedule a devm action for disabling the clock
dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
Bluetooth: btnxpuart: Fix warnings for suspend and resume functions
Bluetooth: btnxpuart: Add system suspend and resume handlers
Bluetooth: btnxpuart: Add support for IW615 chipset
Bluetooth: btnxpuart: Add support for AW693 A1 chipset
Bluetooth: btintel: Add support for Whale Peak2
Bluetooth: btintel: Add support for BlazarU core
Bluetooth: btusb: mediatek: add ISO data transmission functions
Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c
Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c
Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c
Bluetooth: btusb: add callback function in btusb suspend/resume
Bluetooth: btmtk: rename btmediatek_data
Bluetooth: btusb: mediatek: return error for failed reg access
...
====================
Link: https://patch.msgid.link/20240715142543.303944-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility
default_timestamp flag has been introduced in phy_device that is set by
the phy driver to know we are using the old API behavior.
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-4-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This removes the dependencies of hci_req_init and hci_request_cancel_all
from hci_sync.c.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves handling of interleave_scan work to hci_sync.c since
hci_request.c is deprecated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This replaces the instance of hci_prepare_cmd with hci_cmd_sync_alloc
since the former is part of hci_request.c which is considered
deprecated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_request functions are considered deprecated so this replaces the
usage of hci_req_sync with hci_inquiry_sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__hci_cmd_sync_status shall only be used if hci_req_sync_lock is _not_
required which is not the case of hci_dev_cmd so it needs to use
hci_cmd_sync_status which uses hci_req_sync_lock internally.
Fixes: f1a8f402f13f ("Bluetooth: L2CAP: Fix deadlock")
Reported-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove unused and set but otherwise unused 'discovery_old_state'
and 'sco_last_tx' members of 'struct hci_dev'. The first one is
a leftover after commit 182ee45da083 ("Bluetooth: hci_sync: Rework
hci_suspend_notifier"); the second one is originated from ancient
2.4.19 and I was unable to find any actual use since that.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 'dsa_tag_8021q_bridge_join' could be used as a generic implementation
of the 'ds->ops->port_bridge_join()' function. However, it is necessary
to synchronize their arguments.
This patch also moves the 'tx_fwd_offload' flag configuration line into
'dsa_tag_8021q_bridge_join' body. Currently, every (sja1105) driver sets
it, and the future vsc73xx implementation will also need it for
simplification.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-11-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit introduces a new tagger based on 802.1q tagging.
It's designed for the vsc73xx driver. The VSC73xx family doesn't have
any tag support for the RGMII port, but it could be based on VLANs.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240713211620.1125910-8-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new tagging protocol implementation based on tag_8021q is on the
horizon, and it appears that it also has to open-code the complicated
logic of finding a source port based on a VLAN header.
Create a single dsa_tag_8021q_find_user() and make sja1105 call it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240713211620.1125910-7-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that dsa_8021q_rcv() handles better the case where we don't
overwrite the precise source information if it comes from an external
(non-tag_8021q) source, we can now unify the call sequence between
sja1105_rcv() and sja1110_rcv().
This is a preparatory change for creating a higher-level wrapper for the
entire sequence which will live in tag_8021q.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-6-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tag_sja1105 has a wrapper over dsa_8021q_rcv(): sja1105_vlan_rcv(),
which determines whether the packet came from a bridge with
vlan_filtering=1 (the case resolved via
dsa_find_designated_bridge_port_by_vid()), or if it contains a tag_8021q
header.
Looking at a new tagger implementation for vsc73xx, based also on
tag_8021q, it is becoming clear that the logic is needed there as well.
So instead of forcing each tagger to wrap around dsa_8021q_rcv(), let's
merge the logic into the core.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-5-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In both sja1105_rcv() and sja1110_rcv(), we may have precise source port
information coming from parallel hardware mechanisms, in addition to the
tag_8021q header.
Only sja1105_rcv() has extra logic to not overwrite that precise info
with what's present in the VLAN tag. This is because sja1110_rcv() gets
by, by having a reversed set of checks when assigning skb->dev. When the
source port is imprecise (vbid >=1), source_port and switch_id will be
set to zeroes by dsa_8021q_rcv(), which might be problematic. But by
checking for vbid >= 1 first, sja1110_rcv() fends that off.
We would like to make more code common between sja1105_rcv() and
sja1110_rcv(), and for that, we need to make sure that sja1110_rcv()
also goes through the precise source port preservation logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-4-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a port is blocking in the common instance but forwarding in an MST
instance, traffic egressing the bridge will be dropped because the
state of the common instance is overriding that of the MST instance.
Fix this by skipping the port state check in MST mode to allow
checking the vlan state via br_allowed_egress(). This is similar to
what happens in br_handle_frame_finish() when checking ingress
traffic, which was introduced in the change below.
Fixes: ec7328b59176 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Signed-off-by: Elliot Ayrey <elliot.ayrey@alliedtelesis.co.nz>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, ->disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().
If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.
To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.
If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().
Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20
To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe.
Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240712095116.3801586-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new link mode necessary for 10 MBit single-pair
connection in BroadR-Reach mode on bcm5481x PHY by Broadcom.
This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom
terminology. Another link mode to be used is 1BR100 and it is already
present as 100baseT1, because Broadcom's 1BR100 became 100baseT1
(IEEE 802.3bw).
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240712150709.3134474-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The issue initially stems from libpcap. The ethertype will be overwritten
as the VLAN TPID if the network interface lacks hardware VLAN offloading.
In the outbound packet path, if hardware VLAN offloading is unavailable,
the VLAN tag is inserted into the payload but then cleared from the sk_buff
struct. Consequently, this can lead to a false negative when checking for
the presence of a VLAN tag, causing the packet sniffing outcome to lack
VLAN tag information (i.e., TCI-TPID). As a result, the packet capturing
tool may be unable to parse packets as expected.
The TCI-TPID is missing because the prb_fill_vlan_info() function does not
modify the tp_vlan_tci/tp_vlan_tpid values, as the information is in the
payload and not in the sk_buff struct. The skb_vlan_tag_present() function
only checks vlan_all in the sk_buff struct. In cooked mode, the L2 header
is stripped, preventing the packet capturing tool from determining the
correct TCI-TPID value. Additionally, the protocol in SLL is incorrect,
which means the packet capturing tool cannot parse the L3 header correctly.
Link: https://github.com/the-tcpdump-group/libpcap/issues/1105
Link: https://lore.kernel.org/netdev/20240520070348.26725-1-chengen.du@canonical.com/T/#u
Fixes: 393e52e33c6c ("packet: deliver VLAN TCI to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240713114735.62360-1-chengen.du@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 78db544b5d27 ("Bluetooth: hci_core: Remove le_restart_scan
work"), 'scan_start' and 'scan_duration' of 'struct discovery_state'
are still initialized but actually unused. So remove the aforementioned
fields and adjust 'hci_discovery_filter_clear()' and 'le_scan_disable()'
accordingly. Compile tested only.
Fixes: 78db544b5d27 ("Bluetooth: hci_core: Remove le_restart_scan work")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On a Broadcast Sink, after synchronizing to the PA transimitted by a
Broadcast Source, the BIGInfo advertising reports emitted by the
Controller hold the encryption field, which indicates whether the
Broadcast Source is transmitting encrypted streams.
This updates the PA sync hcon QoS with the encryption value reported
in the BIGInfo report, so that this information is accurate if the
userspace tries to access the QoS struct via getsockopt.
Fixes: 1d11d70d1f6b ("Bluetooth: ISO: Pass BIG encryption info through QoS")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When HCI raw sockets are opened, the Bluetooth kernel module doesn't
track CIS/BIS connections. User-space applications have to identify
ISO data by maintaining connection information and look up the mapping
for each ACL data packet received. Besides, btsnoop log captured in
kernel couldn't tell ISO data from ACL data in this case.
To avoid additional lookups, this patch introduces vendor-specific
packet classification for Intel BT controllers to distinguish
ISO data packets from ACL data packets.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'iso_list_data' has been unused since the original
commit ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The "update" variable needs to be initialized to false.
Fixes: 0ece498c27d8 ("Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Refactor the list_for_each_entry() loop of rfcomm_get_dev_list()
function to use array indexing instead of pointer arithmetic.
This way, the code is more readable and idiomatic.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "dl" variable is a pointer to "struct rfcomm_dev_list_req" and
this structure ends in a flexible array:
struct rfcomm_dev_list_req {
[...]
struct rfcomm_dev_info dev_info[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count * size" in
the kzalloc() and copy_to_user() functions.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
In this case, it is important to note that the logic needs a little
refactoring to ensure that the "dev_num" member is initialized before
the first access to the flex array. Specifically, add the assignment
before the list_for_each_entry() loop.
Also remove the "size" variable as it is no longer needed.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Refactor the list_for_each_entry() loop of hci_get_dev_list()
function to use array indexing instead of pointer arithmetic.
This way, the code is more readable and idiomatic.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "dl" variable is a pointer to "struct hci_dev_list_req" and this
structure ends in a flexible array:
struct hci_dev_list_req {
[...]
struct hci_dev_req dev_req[]; /* hci_dev_req structures */
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count * size" in
the kzalloc() and copy_to_user() functions.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
In this case, it is important to note that the logic needs a little
refactoring to ensure that the "dev_num" member is initialized before
the first access to the flex array. Specifically, add the assignment
before the list_for_each_entry() loop.
Also remove the "size" variable as it is no longer needed.
This way, the code is more readable and safer.
This code was detected with the help of Coccinelle, and audited and
modified manually.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes MGMT_OP_LOAD_CONN_PARAM update existing connection by
dectecting the request is just for one connection, parameters already
exists and there is a connection.
Since this is a new behavior the revision is also updated to enable
userspace to detect it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=KyYL
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-07-13
1) Support sending NAT keepalives in ESP in UDP states.
Userspace IKE daemon had to do this before, but the
kernel can better keep track of it.
From Eyal Birger.
2) Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths. Currently, IPsec crypto offload is enabled for GRO
code path only. This patchset support UDP encapsulation for the non
GRO path. From Mike Yu.
* tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Support crypto offload for outbound IPv4 UDP-encapsulated ESP packet
xfrm: Support crypto offload for inbound IPv4 UDP-encapsulated ESP packet
xfrm: Allow UDP encapsulation in crypto offload control path
xfrm: Support crypto offload for inbound IPv6 ESP packets not in GRO path
xfrm: support sending NAT keepalives in ESP in UDP states
====================
Link: https://patch.msgid.link/20240713102416.3272997-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
