IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These global variables are only set during initialization or rarely
change, so declare them as __read_mostly.
Link: http://lkml.kernel.org/r/1507802349-5554-1-git-send-email-changbin.du@intel.com
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that kmemcheck is gone, we don't need the NOTRACK flags.
Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert all allocations that used a NOTRACK flag to stop using it.
Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kmemcheck: kill kmemcheck", v2.
As discussed at LSF/MM, kill kmemcheck.
KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow). KASan is already upstream.
We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).
The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.
Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.
This patch (of 4):
Remove kmemcheck annotations, and calls to kmemcheck from the kernel.
[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Variable cend is set but never read, hence it is redundant and can be
removed.
Cleans up clang build warning: Value stored to 'cend' is never read
Link: http://lkml.kernel.org/r/20171011174942.1372-1-colin.king@canonical.com
Fixes: 369ea8242c ("mm/rmap: update to new mmu_notifier semantic v2")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, we account page tables separately for each page table level,
but that's redundant -- we only make use of total memory allocated to
page tables for oom_badness calculation. We also provide the
information to userspace, but it has dubious value there too.
This patch switches page table accounting to single counter.
mm->pgtables_bytes is now used to account all page table levels. We use
bytes, because page table size for different levels of page table tree
may be different.
The change has user-visible effect: we don't have VmPMD and VmPUD
reported in /proc/[pid]/status. Not sure if anybody uses them. (As
alternative, we can always report 0 kB for them.)
OOM-killer report is also slightly changed: we now report pgtables_bytes
instead of nr_ptes, nr_pmd, nr_puds.
Apart from reducing number of counters per-mm, the benefit is that we
now calculate oom_badness() more correctly for machines which have
different size of page tables depending on level or where page tables
are less than a page in size.
The only downside can be debuggability because we do not know which page
table level could leak. But I do not remember many bugs that would be
caught by separate counters so I wouldn't lose sleep over this.
[akpm@linux-foundation.org: fix mm/huge_memory.c]
Link: http://lkml.kernel.org/r/20171006100651.44742-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
[kirill.shutemov@linux.intel.com: fix build]
Link: http://lkml.kernel.org/r/20171016150113.ikfxy3e7zzfvsr4w@black.fi.intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's add wrappers for ->nr_ptes with the same interface as for nr_pmd
and nr_pud.
The patch also makes nr_ptes accounting dependent onto CONFIG_MMU. Page
table accounting doesn't make sense if you don't have page tables.
It's preparation for consolidation of page-table counters in mm_struct.
Link: http://lkml.kernel.org/r/20171006100651.44742-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On a machine with 5-level paging support a process can allocate
significant amount of memory and stay unnoticed by oom-killer and memory
cgroup. The trick is to allocate a lot of PUD page tables. We don't
account PUD page tables, only PMD and PTE.
We already addressed the same issue for PMD page tables, see commit
dc6c9a35b6 ("mm: account pmd page tables to the process").
Introduction of 5-level paging brings the same issue for PUD page
tables.
The patch expands accounting to PUD level.
[kirill.shutemov@linux.intel.com: s/pmd_t/pud_t/]
Link: http://lkml.kernel.org/r/20171004074305.x35eh5u7ybbt5kar@black.fi.intel.com
[heiko.carstens@de.ibm.com: s390/mm: fix pud table accounting]
Link: http://lkml.kernel.org/r/20171103090551.18231-1-heiko.carstens@de.ibm.com
Link: http://lkml.kernel.org/r/20171002080427.3320-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kmemleak can be tweaked at runtime by writing commands into debugfs
file. Root can use it anyway, but without the write-bit this interface
isn't obvious.
Link: http://lkml.kernel.org/r/150728996582.744328.11541332857988399411.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All users of pagevec_lookup() and pagevec_lookup_range() now pass
PAGEVEC_SIZE as a desired number of pages. Just drop the argument.
Link: http://lkml.kernel.org/r/20171009151359.31984-15-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently pagevec_lookup_range_tag() takes number of pages to look up
but most users don't need this. Create a new function
pagevec_lookup_range_nr_tag() that takes maximum number of pages to
lookup for Ceph which wants this functionality so that we can drop
nr_pages argument from pagevec_lookup_range_tag().
Link: http://lkml.kernel.org/r/20171009151359.31984-13-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use pagevec_lookup_range_tag() in write_cache_pages() as it is
interested only in pages from given range. Remove unnecessary code
resulting from this.
Link: http://lkml.kernel.org/r/20171009151359.31984-12-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use pagevec_lookup_range_tag() in __filemap_fdatawait_range() as it is
interested only in pages from given range. Remove unnecessary code
resulting from this.
Link: http://lkml.kernel.org/r/20171009151359.31984-11-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Ranged pagevec tagged lookup", v3.
In this series I provide a ranged variant of pagevec_lookup_tag() and
use it in places where it makes sense. This series removes some common
code and it also has a potential for speeding up some operations
similarly as for pagevec_lookup_range() (but for now I can think of only
artificial cases where this happens).
This patch (of 16):
Implement a variant of find_get_pages_tag() that stops iterating at
given index. Lots of users of this function (through pagevec_lookup())
actually want a range lookup and all of them are currently open-coding
this.
Also create corresponding pagevec_lookup_range_tag() function.
Link: http://lkml.kernel.org/r/20171009151359.31984-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Steve French <sfrench@samba.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maximum page order can be at max 10 which can be accomodated in short
data type(2 bytes). last_migrate_reason is defined as enum type whose
values can be accomodated in short data type (2 bytes).
Total structure size is currently 16 bytes but after changing structure
size it goes to 12 bytes.
Vlastimil said:
"Looks like it works, so why not.
Before:
[ 0.001000] allocated 50331648 bytes of page_ext
After:
[ 0.001000] allocated 41943040 bytes of page_ext"
Link: http://lkml.kernel.org/r/1507623917-37991-1-git-send-email-ayush.m@samsung.com
Signed-off-by: Ayush Mittal <ayush.m@samsung.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was observed that under cma_alloc fail log, pr_info was used instead
of pr_err. This will lead to problems if printk debug level is set to
below 7. In this case the cma_alloc failure log will not be captured in
the log and it will be difficult to debug.
Simply replace the pr_info with pr_err to capture failure log.
Link: http://lkml.kernel.org/r/1507650633-4430-1-git-send-email-pintu.ping@gmail.com
Signed-off-by: Pintu Agarwal <pintu.ping@gmail.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory allocations can happen before the swap_slots cache initialization
is completed during cpu bring up. If we are low on memory, we could
call get_swap_page() and access swap_slots_cache before it is fully
initialized.
Add a check in get_swap_page() for initialized swap_slots_cache to
prevent this condition. Similar check already exists in free_swap_slot.
Also annotate the checks to indicate the likely condition.
We also added a memory barrier to make sure that the locks
initialization are done before the assignment of cache->slots and
cache->slots_ret pointers. This ensures the assumption that it is safe
to acquire the slots cache locks and use the slots cache when the
corresponding cache->slots or cache->slots_ret pointers are non null.
[akpm@linux-foundation.org: tidy up comment]
[akpm@linux-foundation.org: fix spello in comment]
Link: http://lkml.kernel.org/r/65a9d0f133f63e66bba37b53b2fd0464b7cae771.1500677066.git.tim.c.chen@linux.intel.com
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com>
Acked-by: Ying Huang <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 59dc76b0d4 ("mm: vmscan: reduce size of inactive file
list") 'pgdat->inactive_ratio' is not used, except for printing
"node_inactive_ratio: 0" in /proc/zoneinfo output.
Remove it.
Link: http://lkml.kernel.org/r/20171003152611.27483-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is an optimization patch that only affect mmu_notifier users which
rely on the invalidate_range() callback. This patch avoids calling that
callback twice in a row from inside __mmu_notifier_invalidate_range_end
Existing pattern (before this patch):
mmu_notifier_invalidate_range_start()
pte/pmd/pud_clear_flush_notify()
mmu_notifier_invalidate_range()
mmu_notifier_invalidate_range_end()
mmu_notifier_invalidate_range()
New pattern (after this patch):
mmu_notifier_invalidate_range_start()
pte/pmd/pud_clear_flush_notify()
mmu_notifier_invalidate_range()
mmu_notifier_invalidate_range_only_end()
We call the invalidate_range callback after clearing the page table
under the page table lock and we skip the call to invalidate_range
inside the __mmu_notifier_invalidate_range_end() function.
Idea from Andrea Arcangeli
Link: http://lkml.kernel.org/r/20171017031003.7481-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch only affects users of mmu_notifier->invalidate_range callback
which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ...
and it is an optimization for those users. Everyone else is unaffected
by it.
When clearing a pte/pmd we are given a choice to notify the event under
the page table lock (notify version of *_clear_flush helpers do call the
mmu_notifier_invalidate_range). But that notification is not necessary
in all cases.
This patch removes almost all cases where it is useless to have a call
to mmu_notifier_invalidate_range before
mmu_notifier_invalidate_range_end. It also adds documentation in all
those cases explaining why.
Below is a more in depth analysis of why this is fine to do this:
For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when
device use thing like ATS/PASID to get the IOMMU to walk the CPU page
table to access a process virtual address space). There is only 2 cases
when you need to notify those secondary TLB while holding page table
lock when clearing a pte/pmd:
A) page backing address is free before mmu_notifier_invalidate_range_end
B) a page table entry is updated to point to a new page (COW, write fault
on zero page, __replace_page(), ...)
Case A is obvious you do not want to take the risk for the device to write
to a page that might now be used by something completely different.
Case B is more subtle. For correctness it requires the following sequence
to happen:
- take page table lock
- clear page table entry and notify (pmd/pte_huge_clear_flush_notify())
- set page table entry to point to new page
If clearing the page table entry is not followed by a notify before setting
the new pte/pmd value then you can break memory model like C11 or C++11 for
the device.
Consider the following scenario (device use a feature similar to ATS/
PASID):
Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we
assume they are write protected for COW (other case of B apply too).
[Time N] -----------------------------------------------------------------
CPU-thread-0 {try to write to addrA}
CPU-thread-1 {try to write to addrB}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {read addrA and populate device TLB}
DEV-thread-2 {read addrB and populate device TLB}
[Time N+1] ---------------------------------------------------------------
CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}}
CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+2] ---------------------------------------------------------------
CPU-thread-0 {COW_step1: {update page table point to new page for addrA}}
CPU-thread-1 {COW_step1: {update page table point to new page for addrB}}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+3] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {preempted}
CPU-thread-2 {write to addrA which is a write to new page}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+3] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {preempted}
CPU-thread-2 {}
CPU-thread-3 {write to addrB which is a write to new page}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+4] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {}
DEV-thread-2 {}
[Time N+5] ---------------------------------------------------------------
CPU-thread-0 {preempted}
CPU-thread-1 {}
CPU-thread-2 {}
CPU-thread-3 {}
DEV-thread-0 {read addrA from old page}
DEV-thread-2 {read addrB from new page}
So here because at time N+2 the clear page table entry was not pair with a
notification to invalidate the secondary TLB, the device see the new value
for addrB before seing the new value for addrA. This break total memory
ordering for the device.
When changing a pte to write protect or to point to a new write protected
page with same content (KSM) it is ok to delay invalidate_range callback
to mmu_notifier_invalidate_range_end() outside the page table lock. This
is true even if the thread doing page table update is preempted right
after releasing page table lock before calling
mmu_notifier_invalidate_range_end
Thanks to Andrea for thinking of a problematic scenario for COW.
[jglisse@redhat.com: v2]
Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use BUG_ON(in_interrupt()) in zs_map_object(). This is not a new
BUG_ON(), it's always been there, but was recently changed to
VM_BUG_ON(). There are several problems there. First, we use use
per-CPU mappings both in zsmalloc and in zram, and interrupt may easily
corrupt those buffers. Second, and more importantly, we believe it's
possible to start leaking sensitive information. Consider the following
case:
-> process P
swap out
zram
per-cpu mapping CPU1
compress page A
-> IRQ
swap out
zram
per-cpu mapping CPU1
compress page B
write page from per-cpu mapping CPU1 to zsmalloc pool
iret
-> process P
write page from per-cpu mapping CPU1 to zsmalloc pool [*]
return
* so we store overwritten data that actually belongs to another
page (task) and potentially contains sensitive data. And when
process P will page fault it's going to read (swap in) that
other task's data.
Link: http://lkml.kernel.org/r/20170929045140.4055-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vm direct limit setting must be set greater than vm background limit
setting. Otherwise print a warning to help the operator to figure out
that the vm dirtiness settings is in illogical state.
Link: http://lkml.kernel.org/r/1506592464-30962-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
for_each_memblock_type macro function relies on idx variable defined in
the caller context. Silent macro arguments are almost always wrong
thing to do. They make code harder to read and easier to get wrong.
Let's use an explicit iterator parameter for for_each_memblock_type and
make the code more obious. This patch is a mere cleanup and it
shouldn't introduce any functional change.
Link: http://lkml.kernel.org/r/20170913133029.28911-1-gi-oh.kim@profitbricks.com
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have a hardcoded 120s timeout after which the memory offline fails
basically since the hot remove has been introduced. This is essentially
a policy implemented in the kernel. Moreover there is no way to adjust
the timeout and so we are sometimes facing memory offline failures if
the system is under a heavy memory pressure or very intensive CPU
workload on large machines.
It is not very clear what purpose the timeout actually serves. The
offline operation is interruptible by a signal so if userspace wants
some timeout based termination this can be done trivially by sending a
signal.
If there is a strong usecase to do this from the kernel then we should
do it properly and have a it tunable from the userspace with the timeout
disabled by default along with the explanation who uses it and for what
purporse.
Link: http://lkml.kernel.org/r/20170918070834.13083-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm, memory_hotplug: redefine memory offline retry logic", v2.
While testing memory hotplug on a large 4TB machine we have noticed that
memory offlining is just too eager to fail. The primary reason is that
the retry logic is just too easy to give up. We have 4 ways out of the
offline
- we have a permanent failure (isolation or memory notifiers fail,
or hugetlb pages cannot be dropped)
- userspace sends a signal
- a hardcoded 120s timeout expires
- page migration fails 5 times
This is way too convoluted and it doesn't scale very well. We have seen
both temporary migration failures as well as 120s being triggered.
After removing those restrictions we were able to pass stress testing
during memory hot remove without any other negative side effects
observed. Therefore I suggest dropping both hard coded policies. I
couldn't have found any specific reason for them in the changelog. I
neither didn't get any response [1] from Kamezawa. If we need some
upper bound - e.g. timeout based - then we should have a proper and
user defined policy for that. In any case there should be a clear use
case when introducing it.
This patch (of 2):
Memory offlining can fail too eagerly under heavy memory pressure.
page:ffffea22a646bd00 count:255 mapcount:252 mapping:ffff88ff926c9f38 index:0x3
flags: 0x9855fe40010048(uptodate|active|mappedtodisk)
page dumped because: isolation failed
page->mem_cgroup:ffff8801cd662000
memory offlining [mem 0x18b580000000-0x18b5ffffffff] failed
Isolation has failed here because the page is not on LRU. Most probably
because it was on the pcp LRU cache or it has been removed from the LRU
already but it hasn't been freed yet. In both cases the page doesn't
look non-migrable so retrying more makes sense.
__offline_pages seems rather cluttered when it comes to the retry logic.
We have 5 retries at maximum and a timeout. We could argue whether the
timeout makes sense but failing just because of a race when somebody
isoltes a page from LRU or puts it on a pcp LRU lists is just wrong. It
only takes it to race with a process which unmaps some pages and remove
them from the LRU list and we can fail the whole offline because of
something that is a temporary condition and actually not harmful for the
offline.
Please note that unmovable pages should be already excluded during
start_isolate_page_range. We could argue that has_unmovable_pages is
racy and MIGRATE_MOVABLE check doesn't provide any hard guarantee either
but kernel zones (aka < ZONE_MOVABLE) will very likely detect unmovable
pages in most cases and movable zone shouldn't contain unmovable pages
at all. Some of those pages might be pinned but not for ever because
that would be a bug on its own. In any case the context is still
interruptible and so the userspace can easily bail out when the
operation takes too long. This is certainly better behavior than a
hardcoded retry loop which is racy.
Fix this by removing the max retry count and only rely on the timeout
resp. interruption by a signal from the userspace. Also retry rather
than fail when check_pages_isolated sees some !free pages because those
could be a result of the race as well.
Link: http://lkml.kernel.org/r/20170918070834.13083-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reserved pages should be completely ignored by the core mm because they
have a special meaning for their owners. has_unmovable_pages doesn't
check those so we rely on other tests (reference count, or PageLRU) to
fail on such pages. Althought this happens to work it is safer to
simply check for those explicitly and do not rely on the owner of the
page to abuse those fields for special purposes.
Please note that this is more of a further fortification of the code
rahter than a fix of an existing issue.
Link: http://lkml.kernel.org/r/20171013120756.jeopthigbmm3c7bl@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo has noticed that "mm: drop migrate type checks from
has_unmovable_pages" would break CMA allocator because it relies on
has_unmovable_pages returning false even for CMA pageblocks which in
fact don't have to be movable:
alloc_contig_range
start_isolate_page_range
set_migratetype_isolate
has_unmovable_pages
This is a result of the code sharing between CMA and memory hotplug
while each one has a different idea of what has_unmovable_pages should
return. This is unfortunate but fixing it properly would require a lot
of code duplication.
Fix the issue by introducing the requested migrate type argument and
special case MIGRATE_CMA case where CMA page blocks are handled
properly. This will work for memory hotplug because it requires
MIGRATE_MOVABLE.
Link: http://lkml.kernel.org/r/20171019122118.y6cndierwl2vnguj@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ran Wang <ran.wang_1@nxp.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael has noticed that the memory offline tries to migrate kernel code
pages when doing
echo 0 > /sys/devices/system/memory/memory0/online
The current implementation will fail the operation after several failed
page migration attempts but we shouldn't even attempt to migrate that
memory and fail right away because this memory is clearly not
migrateable. This will become a real problem when we drop the retry
loop counter resp. timeout.
The real problem is in has_unmovable_pages in fact. We should fail if
there are any non migrateable pages in the area. In orther to guarantee
that remove the migrate type checks because MIGRATE_MOVABLE is not
guaranteed to contain only migrateable pages. It is merely a heuristic.
Similarly MIGRATE_CMA does guarantee that the page allocator doesn't
allocate any non-migrateable pages from the block but CMA allocations
themselves are unlikely to migrateable. Therefore remove both checks.
[akpm@linux-foundation.org: remove unused local `mt']
Link: http://lkml.kernel.org/r/20171013120013.698-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ran Wang <ran.wang_1@nxp.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"mapping" parameter to balance_dirty_pages() is not used anymore.
Fixes: dfb8ae5678 ("writeback: let balance_dirty_pages() work on the matching cgroup bdi_writeback")
Link: http://lkml.kernel.org/r/20170927221311.23263-1-tahsin@google.com
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a page fault occurs for a swap entry, the physical swap readahead
(not the VMA base swap readahead) may readahead several swap entries
after the fault swap entry. The readahead algorithm calculates some of
the swap entries to readahead via increasing the offset of the fault
swap entry without checking whether they are beyond the end of the swap
device and it relys on the __swp_swapcount() and swapcache_prepare() to
check it. Although __swp_swapcount() checks for the swap entry passed
in, it will complain with the error message as follow for the expected
invalid swap entry. This may make the end users confused.
swap_info_get: Bad swap offset entry 0200f8a7
To fix the false error message, the swap entry checking is added in
swapin_readahead() to avoid to pass the out-of-bound swap entries and
the swap entry reserved for the swap header to __swp_swapcount() and
swapcache_prepare().
Link: http://lkml.kernel.org/r/20171102054225.22897-1-ying.huang@intel.com
Fixes: e8c26ab605 ("mm/swap: skip readahead for unreferenced swap slots")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Suggested-by: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [4.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When SWP_SYNCHRONOUS_IO swapped-in pages are shared by several
processes, it can cause unnecessary memory wastage by skipping swap
cache. Because, with swapin fault by read, they could share a page if
the page were in swap cache. Thus, it avoids allocating same content
new pages.
This patch makes the swapcache skipping work only if the swap pte is
non-sharable.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1507620825-5537-1-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With fast swap storage, the platforms want to use swap more aggressively
and swap-in is crucial to application latency.
The rw_page() based synchronous devices like zram, pmem and btt are such
fast storage. When I profile swapin performance with zram lz4
decompress test, S/W overhead is more than 70%. Maybe, it would be
bigger in nvdimm.
This patch aims to reduce swap-in latency by skipping swapcache if the
swap device is synchronous device like rw_page based device. It
enhances 45% my swapin test(5G sequential swapin, no readahead, from
2.41sec to 1.64sec).
Link: http://lkml.kernel.org/r/1505886205-9671-5-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If rw-page based fast storage is used for swap devices, we need to
detect it to enhance swap IO operations. This patch is preparation for
optimizing of swap-in operation with next patch.
Link: http://lkml.kernel.org/r/1505886205-9671-4-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.
Link: http://lkml.kernel.org/r/20170927082038.3782-6-jthumshirn@suse.de
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When slub_debug=O is set. It is possible to clear debug flags for an
"unmergeable" slab cache in kmem_cache_open(). It makes the "unmergeable"
cache became "mergeable" in sysfs_slab_add().
These caches will generate their "unique IDs" by create_unique_id(), but
it is possible to create identical unique IDs. In my experiment,
sgpool-128, names_cache, biovec-256 generate the same ID ":Ft-0004096" and
the kernel reports "sysfs: cannot create duplicate filename
'/kernel/slab/:Ft-0004096'".
To repeat my experiment, set disable_higher_order_debug=1,
CONFIG_SLUB_DEBUG_ON=y in kernel-4.14.
Fix this issue by setting unmergeable=1 if slub_debug=O and the the
default slub_debug contains any no-merge flags.
call path:
kmem_cache_create()
__kmem_cache_alias() -> we set SLAB_NEVER_MERGE flags here
create_cache()
__kmem_cache_create()
kmem_cache_open() -> clear DEBUG_METADATA_FLAGS
sysfs_slab_add() -> the slab cache is mergeable now
sysfs: cannot create duplicate filename '/kernel/slab/:Ft-0004096'
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x7c
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.0-rc7ajb-00131-gd4c2e9f-dirty #123
Hardware name: linux,dummy-virt (DT)
task: ffffffc07d4e0080 task.stack: ffffff8008008000
PC is at sysfs_warn_dup+0x60/0x7c
LR is at sysfs_warn_dup+0x60/0x7c
pc : lr : pstate: 60000145
Call trace:
sysfs_warn_dup+0x60/0x7c
sysfs_create_dir_ns+0x98/0xa0
kobject_add_internal+0xa0/0x294
kobject_init_and_add+0x90/0xb4
sysfs_slab_add+0x90/0x200
__kmem_cache_create+0x26c/0x438
kmem_cache_create+0x164/0x1f4
sg_pool_init+0x60/0x100
do_one_initcall+0x38/0x12c
kernel_init_freeable+0x138/0x1d4
kernel_init+0x10/0xfc
ret_from_fork+0x10/0x18
Link: http://lkml.kernel.org/r/1510365805-5155-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct kmem_cache::flags is "unsigned long" which is unnecessary on
64-bit as no flags are defined in the higher bits.
Switch the field to 32-bit and save some space on x86_64 until such
flags appear:
add/remove: 0/0 grow/shrink: 0/107 up/down: 0/-657 (-657)
function old new delta
sysfs_slab_add 720 719 -1
...
check_object 699 676 -23
[akpm@linux-foundation.org: fix printk warning]
Link: http://lkml.kernel.org/r/20171021100635.GA8287@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add sparse-checked slab_flags_t for struct kmem_cache::flags (SLAB_POISON,
etc).
SLAB is bloated temporarily by switching to "unsigned long", but only
temporarily.
Link: http://lkml.kernel.org/r/20171021100225.GA22428@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLAB_RECLAIM_ACCOUNT is a permanent attribute of a slab cache. Set
__GFP_RECLAIMABLE as part of its ->allocflags rather than check the
cachep flag on every page allocation.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1710171527560.140898@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current flow guarantees a valid pointer when handling the __GFP_ZERO
case. So remove the unnecessary NULL pointer check.
Link: http://lkml.kernel.org/r/1507203141-11959-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel may panic when an oom happens without killable process
sometimes it is caused by huge unreclaimable slabs used by kernel.
Although kdump could help debug such problem, however, kdump is not
available on all architectures and it might be malfunction sometime.
And, since kernel already panic it is worthy capturing such information
in dmesg to aid touble shooting.
Print out unreclaimable slab info (used size and total size) which
actual memory usage is not zero (num_objs * size != 0) when
unreclaimable slabs amount is greater than total user memory (LRU
pages).
The output looks like:
Unreclaimable slab info:
Name Used Total
rpc_buffers 31KB 31KB
rpc_tasks 7KB 7KB
ebitmap_node 1964KB 1964KB
avtab_node 5024KB 5024KB
xfs_buf 1402KB 1402KB
xfs_ili 134KB 134KB
xfs_efi_item 115KB 115KB
xfs_efd_item 115KB 115KB
xfs_buf_item 134KB 134KB
xfs_log_item_desc 342KB 342KB
xfs_trans 1412KB 1412KB
xfs_ifork 212KB 212KB
[yang.s@alibaba-inc.com: v11]
Link: http://lkml.kernel.org/r/1507656303-103845-4-git-send-email-yang.s@alibaba-inc.com
Link: http://lkml.kernel.org/r/1507152550-46205-4-git-send-email-yang.s@alibaba-inc.com
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Pull x86 core updates from Ingo Molnar:
"Note that in this cycle most of the x86 topics interacted at a level
that caused them to be merged into tip:x86/asm - but this should be a
temporary phenomenon, hopefully we'll back to the usual patterns in
the next merge window.
The main changes in this cycle were:
Hardware enablement:
- Add support for the Intel UMIP (User Mode Instruction Prevention)
CPU feature. This is a security feature that disables certain
instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)
[ Note that this is disabled by default for now, there are some
smaller enhancements in the pipeline that I'll follow up with in
the next 1-2 days, which allows this to be enabled by default.]
- Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
feature, on top of SME (Secure Memory Encryption) support that was
added in v4.14. (Tom Lendacky, Brijesh Singh)
- Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)
Other changes:
- A big series of entry code simplifications and enhancements (Andy
Lutomirski)
- Make the ORC unwinder default on x86 and various objtool
enhancements. (Josh Poimboeuf)
- 5-level paging enhancements (Kirill A. Shutemov)
- Micro-optimize the entry code a bit (Borislav Petkov)
- Improve the handling of interdependent CPU features in the early
FPU init code (Andi Kleen)
- Build system enhancements (Changbin Du, Masahiro Yamada)
- ... plus misc enhancements, fixes and cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
x86/build: Make the boot image generation less verbose
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86: Add tests for User-Mode Instruction Prevention
x86/traps: Fix up general protection faults caused by UMIP
x86/umip: Enable User-Mode Instruction Prevention at runtime
x86/umip: Force a page fault when unable to copy emulated result to user
x86/umip: Add emulation code for UMIP instructions
x86/cpufeature: Add User-Mode Instruction Prevention definitions
x86/insn-eval: Add support to resolve 16-bit address encodings
x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
x86/insn-eval: Add support to resolve 32-bit address encodings
x86/insn-eval: Compute linear address in several utility functions
resource: Fix resource_size.cocci warnings
X86/KVM: Clear encryption attribute when SEV is active
X86/KVM: Decrypt shared per-cpu variables when SEV is active
percpu: Introduce DEFINE_PER_CPU_DECRYPTED
x86: Add support for changing memory encryption attribute in early boot
x86/io: Unroll string I/O when SEV is active
x86/boot: Add early boot support when running with SEV active
...
Since commit:
83e3c48729 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
we allocate the mem_section array dynamically in sparse_memory_present_with_active_regions(),
but some architectures, like arm64, don't call the routine to initialize sparsemem.
Let's move the initialization into memory_present() it should cover all
architectures.
Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 83e3c48729 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
Link: http://lkml.kernel.org/r/20171107083337.89952-1-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
That we we can also poll non blk-mq queues. Mostly needed for
the NVMe multipath code, but could also be useful elsewhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
