3005 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab
69ecdbac14 Merge remote-tracking branch 'linus/master' into staging/for_v3.5
* linus/master: (805 commits)
  tty: Fix LED error return
  openvswitch: checking wrong variable in queue_userspace_packet()
  bonding: Fix LACPDU rx_dropped commit.
  Linux 3.4-rc7
  ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
  ARM: EXYNOS: use s5p-timer for UniversalC210 board
  ARM / mach-shmobile: Invalidate caches when booting secondary cores
  ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
  ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
  ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
  ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
  MAINTAINERS: Add myself as the cpufreq maintainer
  dm mpath: check if scsi_dh module already loaded before trying to load
  dm thin: correct module description
  dm thin: fix unprotected use of prepared_discards list
  dm thin: reinstate missing mempool_free in cell_release_singleton
  gpio/exynos: Fix compiler warnings when non-exynos machines are selected
  gpio: pch9: Use proper flow type handlers
  powerpc/irq: Fix another case of lazy IRQ state getting out of sync
  ks8851: Update link status during link change interrupt
  ...

Conflicts:
	drivers/media/common/tuners/xc5000.c
	drivers/media/common/tuners/xc5000.h
	drivers/usb/gadget/uvc_queue.c
2012-05-15 08:39:25 -03:00
Antonio Ospite
c8e1fb4a67 [media] Input: move drivers/input/fixp-arith.h to include/linux
Move drivers/input/fixp-arith.h to include/linux so that the functions
defined there can be used by other subsystems, for instance some video
devices ISPs can control the output HUE value by setting registers for
sin(HUE) and cos(HUE).

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 09:47:23 -03:00
Viresh Kumar
829c4f9690 Input: spear-keyboard - add device tree bindings
This adds simple DT bindings for spear-keyboard controller.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:40:02 -07:00
Dmitry Torokhov
b45c8f35a7 Input: matrix-keymap - wire up device tree support
When platform keymap is not supplied to matrix_keypad_build_keymap()
and device tree support is enabled, try locating specified property
and load keymap from it. If property name is not defined, try using
"linux,keymap".

Based on earlier patch by Viresh Kumar <viresh.kumar@st.com>

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:39:43 -07:00
Dmitry Torokhov
1932811f42 Input: matrix-keymap - uninline and prepare for device tree support
Change matrix-keymap helper to be out-of-line, like sparse keymap,
allow the helper perform basic keymap validation and return errors,
and prepare for device tree support.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:38:47 -07:00
Jean-François Dagenais
d0a3457d38 Input: adp5588 - add support for gpio names
Signed-off-by: Jean-François Dagenais <jeff.dagenais@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:34:16 -07:00
Poddar, Sourav
f77621cc64 Input: omap-keypad - dynamically handle register offsets
Hi Dmitry,

On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote:
> Hi Dmitry,
>
> I did some minor fixes to the patch which you suggested above and
> the keypad is functional now.
>
> Changes:
> - Move "pm_runtime_enable" before using "pm_runtime_get_sync".
>
> Sending the patch inlined..(also attached).
>
> From: G, Manjunath Kondaiah <manjugk@ti.com>
> Date: Mon, 10 Oct 2011 20:52:05 +0530
> Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets
>
> Keypad controller register offsets are different for omap4
> and omap5. Handle these offsets through static mapping and
> assign these mappings during run time.
>
> Tested on omap4430 sdp with 3.4-rc3.
> Tested on omap5430evm with 3.1-custom kernel.
>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
>  drivers/input/keyboard/Kconfig        |    4 +-
>  drivers/input/keyboard/omap4-keypad.c |  120 +++++++++++++++++++++++++-------
>  2 files changed, 95 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index f354813..33bbdee 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -512,9 +512,9 @@ config KEYBOARD_OMAP
>          module will be called omap-keypad.
>
>  config KEYBOARD_OMAP4
> -       tristate "TI OMAP4 keypad support"
> +       tristate "TI OMAP4+ keypad support"
>        help
> -         Say Y here if you want to use the OMAP4 keypad.
> +         Say Y here if you want to use the OMAP4+ keypad.
>
>          To compile this driver as a module, choose M here: the
>          module will be called omap4-keypad.
> diff --git a/drivers/input/keyboard/omap4-keypad.c
> b/drivers/input/keyboard/omap4-keypad.c
> index e809ac0..d7102e8 100644
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -68,19 +68,52 @@
>
>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>
> +enum {
> +       KBD_REVISION_OMAP4 = 0,
> +       KBD_REVISION_OMAP5,
> +};
> +
>  struct omap4_keypad {
>        struct input_dev *input;
>
>        void __iomem *base;
> -       int irq;
> +       unsigned int irq;
>
>        unsigned int rows;
>        unsigned int cols;
> +       u32 reg_offset;
> +       u32 irqreg_offset;
>        unsigned int row_shift;
>        unsigned char key_state[8];
>        unsigned short keymap[];
>  };
>
> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->reg_offset + offset);
> +}
> +
> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->reg_offset + offset);
> +}
> +
> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->irqreg_offset + offset);
> +}
> +
> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
> +                            u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
> +}
> +
> +
>  /* Interrupt handler */
>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>  {
> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>        u32 *new_state = (u32 *) key_state;
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
> -       *(new_state + 1) = __raw_readl(keypad_data->base
> -                                               + OMAP4_KBD_FULLCODE63_32);
> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>
>        for (row = 0; row < keypad_data->rows; row++) {
>                changed = key_state[row] ^ keypad_data->key_state[row];
> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>                sizeof(keypad_data->key_state));
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        /* enable interrupts */
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +               OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>
>        return IRQ_HANDLED;
>  }
> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>
>        disable_irq(keypad_data->irq);
>
> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
> -                       keypad_data->base + OMAP4_KBD_CTRL);
> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
> +                       OMAP4_VAL_FUNCTIONALCFG);
> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
> +                       OMAP4_VAL_DEBOUNCINGTIME);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                       OMAP4_VAL_IRQDISABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>
>        enable_irq(keypad_data->irq);
>
> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>        disable_irq(keypad_data->irq);
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        enable_irq(keypad_data->irq);
>
> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        struct resource *res;
>        resource_size_t size;
>        unsigned int row_shift, max_keys;
> +       int rev;
>        int irq;
>        int error;
>
> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        keypad_data->rows = pdata->rows;
>        keypad_data->cols = pdata->cols;
>
> +       /*
> +       * Enable clocks for the keypad module so that we can read
> +       * revision register.
> +       */
> +       pm_runtime_enable(&pdev->dev);
> +       error = pm_runtime_get_sync(&pdev->dev);
> +       if (error) {
> +               dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
> +               goto err_unmap;
> +       }
> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
> +       rev &= 0x03 << 30;
> +       rev >>= 30;
> +       switch (rev) {
> +       case KBD_REVISION_OMAP4:
> +               keypad_data->reg_offset = 0x00;
> +               keypad_data->irqreg_offset = 0x00;
> +               break;
> +       case KBD_REVISION_OMAP5:
> +               keypad_data->reg_offset = 0x10;
> +               keypad_data->irqreg_offset = 0x0c;
> +               break;
> +       default:
> +               dev_err(&pdev->dev,
> +                       "Keypad reports unsupported revision %d", rev);
> +               error = -EINVAL;
> +               goto err_pm_put_sync;
> +       }
> +
>        /* input device allocation */
>        keypad_data->input = input_dev = input_allocate_device();
>        if (!input_dev) {
>                error = -ENOMEM;
> -               goto err_unmap;
> +               goto err_pm_put_sync;
>        }
>
>        input_dev->name = pdev->name;
> @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>                        input_dev->keycode, input_dev->keybit);
>
>        error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
> -                            IRQF_TRIGGER_RISING,
> +                           IRQF_DISABLED | IRQF_TRIGGER_RISING,
Sorry, " IRQF_DISABLED" got included by mistake.
Removing this stray change and sending it again.

>                             "omap4-keypad", keypad_data);
>        if (error) {
>                dev_err(&pdev->dev, "failed to register interrupt\n");
>                goto err_free_input;
>        }
>
> -       pm_runtime_enable(&pdev->dev);
> +       pm_runtime_put_sync(&pdev->dev);
>
>        error = input_register_device(keypad_data->input);
>        if (error < 0) {
> @@ -296,6 +360,8 @@ err_pm_disable:
>        free_irq(keypad_data->irq, keypad_data);
>  err_free_input:
>        input_free_device(input_dev);
> +err_pm_put_sync:
> +       pm_runtime_put_sync(&pdev->dev);
>  err_unmap:
>        iounmap(keypad_data->base);
>  err_release_mem:
>
>
> ~Sourav
>
> On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
>>> Hi Dmitry ,
>>>
>>>
>>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov
>>> <dmitry.torokhov@gmail.com> wrote:
>>> > Ho Sourav,
>>> >
>>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote:
>>> >>
>>> >> -config KEYBOARD_OMAP4
>>> >> -     tristate "TI OMAP4 keypad support"
>>> >> +config KEYBOARD_OMAP4+
>>> >
>>> > I think this works purely by accident - '+' sign getting dropped by
>>> > parser...
>>> >
>>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input)
>>> >>
>>> >>       disable_irq(keypad_data->irq);
>>> >>
>>> >> -     __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>>> >> -                     keypad_data->base + OMAP4_KBD_CTRL);
>>> >> -     __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>>> >> -                     keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>>> >> -     __raw_writel(OMAP4_VAL_IRQDISABLE,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQSTATUS);
>>> >> -     __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQENABLE);
>>> >> -     __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>>> >> -                     keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>>> >> +     keypad_data->revision = kbd_read_revision(keypad_data,
>>> >> +                     OMAP4_KBD_REVISION);
>>> >> +     switch (keypad_data->revision) {
>>> >> +     case 1:
>>> >> +             keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c;
>>> >> +             keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c;
>>> >> +             keypad_data->reg_offset = 0x10;
>>> >> +             break;
>>> >
>>> > This should be done in probe().
>>> >
>>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying
>>> to read the keypad revision register.?
>>
>> Ah, indeed, but I think not pm_runtime_get_sync() but
>> pm_runtime_set_active().
>>
>> Not sure if this will fix the crash...
>>
>> --
>> Dmitry
>>
>>
>> Input: omap-keypad - dynamically handle register offsets
>>
>> From: G, Manjunath Kondaiah <manjugk@ti.com>
>>
>> Keypad controller register offsets are different for omap4
>> and omap5. Handle these offsets through static mapping and
>> assign these mappings during run time.
>>
>> Tested on omap4430 sdp with 3.4-rc3.
>> Tested on omap5430evm with 3.1-custom kernel.
>>
>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
>> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
>> ---
>>
>>  drivers/input/keyboard/Kconfig        |    4 +
>>  drivers/input/keyboard/omap4-keypad.c |  117 ++++++++++++++++++++++++++-------
>>  2 files changed, 94 insertions(+), 27 deletions(-)
>>
>>
>> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
>> index 20a3753..84ee155 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP
>>          module will be called omap-keypad.
>>
>>  config KEYBOARD_OMAP4
>> -       tristate "TI OMAP4 keypad support"
>> +       tristate "TI OMAP4+ keypad support"
>>        help
>> -         Say Y here if you want to use the OMAP4 keypad.
>> +         Say Y here if you want to use the OMAP4+ keypad.
>>
>>          To compile this driver as a module, choose M here: the
>>          module will be called omap4-keypad.
>> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
>> index e809ac0..c9fd0df 100644
>> --- a/drivers/input/keyboard/omap4-keypad.c
>> +++ b/drivers/input/keyboard/omap4-keypad.c
>> @@ -68,19 +68,52 @@
>>
>>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>>
>> +enum {
>> +       KBD_REVISION_OMAP4 = 0,
>> +       KBD_REVISION_OMAP5,
>> +};
>> +
>>  struct omap4_keypad {
>>        struct input_dev *input;
>>
>>        void __iomem *base;
>> -       int irq;
>> +       unsigned int irq;
>>
>>        unsigned int rows;
>>        unsigned int cols;
>> +       u32 reg_offset;
>> +       u32 irqreg_offset;
>>        unsigned int row_shift;
>>        unsigned char key_state[8];
>>        unsigned short keymap[];
>>  };
>>
>> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->reg_offset + offset);
>> +}
>> +
>> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->reg_offset + offset);
>> +}
>> +
>> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
>> +                            u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +
>>  /* Interrupt handler */
>>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>  {
>> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>        u32 *new_state = (u32 *) key_state;
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
>> -       *(new_state + 1) = __raw_readl(keypad_data->base
>> -                                               + OMAP4_KBD_FULLCODE63_32);
>> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
>> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>>
>>        for (row = 0; row < keypad_data->rows; row++) {
>>                changed = key_state[row] ^ keypad_data->key_state[row];
>> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>                sizeof(keypad_data->key_state));
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        /* enable interrupts */
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +               OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>>
>>        return IRQ_HANDLED;
>>  }
>> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>>
>>        disable_irq(keypad_data->irq);
>>
>> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>> -                       keypad_data->base + OMAP4_KBD_CTRL);
>> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
>> +                       OMAP4_VAL_FUNCTIONALCFG);
>> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
>> +                       OMAP4_VAL_DEBOUNCINGTIME);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                       OMAP4_VAL_IRQDISABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
>> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>>        disable_irq(keypad_data->irq);
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        struct resource *res;
>>        resource_size_t size;
>>        unsigned int row_shift, max_keys;
>> +       int rev;
>>        int irq;
>>        int error;
>>
>> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        keypad_data->rows = pdata->rows;
>>        keypad_data->cols = pdata->cols;
>>
>> +       /*
>> +        * Mark device as active (and wake up its parent) so we can read
>> +        * revision register.
>> +        */
>> +       error = pm_runtime_set_active(&pdev->dev);
>> +       if (error) {
>> +               dev_err(&pdev->dev, "pm_runtime_set_active() failed\n");
>> +               goto err_unmap;
>> +       }
>> +
>> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
>> +       rev &= 0x03 << 30;
>> +       rev >>= 30;
>> +       switch (rev) {
>> +       case KBD_REVISION_OMAP4:
>> +               keypad_data->reg_offset = 0x00;
>> +               keypad_data->irqreg_offset = 0x00;
>> +               break;
>> +       case KBD_REVISION_OMAP5:
>> +               keypad_data->reg_offset = 0x10;
>> +               keypad_data->irqreg_offset = 0x0c;
>> +               break;
>> +       default:
>> +               dev_err(&pdev->dev,
>> +                       "Keypad reports unsupported revision %d", rev);
>> +               error = -EINVAL;
>> +               goto err_pm_suspended;
>> +       }
>> +
>>        /* input device allocation */
>>        keypad_data->input = input_dev = input_allocate_device();
>>        if (!input_dev) {
>>                error = -ENOMEM;
>> -               goto err_unmap;
>> +               goto err_pm_suspended;
>>        }
>>
>>        input_dev->name = pdev->name;
>> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        }
>>
>>        pm_runtime_enable(&pdev->dev);
>> +       pm_runtime_put_sync(&pdev->dev);
>>
>>        error = input_register_device(keypad_data->input);
>>        if (error < 0) {
>> @@ -296,6 +361,8 @@ err_pm_disable:
>>        free_irq(keypad_data->irq, keypad_data);
>>  err_free_input:
>>        input_free_device(input_dev);
>> +err_pm_suspended:
>> +       pm_runtime_set_suspended(&pdev->dev);
>>  err_unmap:
>>        iounmap(keypad_data->base);
>>  err_release_mem:

From: G, Manjunath Kondaiah <manjugk@ti.com>
Date: Mon, 10 Oct 2011 20:52:05 +0530
Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets

Keypad controller register offsets are different for omap4
and omap5. Handle these offsets through static mapping and
assign these mappings during run time.

Tested on omap4430 sdp with 3.4-rc3.
Tested on omap5430evm with 3.1-custom kernel.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:33:58 -07:00
JJ Ding
1a49a0a04d Input: synaptics - fix compile warning
Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of
a compile warning when we don't select synaptics support.

drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function]

Signed-off-by: JJ Ding <dgdunix@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:33:49 -07:00
Dmitry Torokhov
616575c2d2 Input: ALPS - switch to using input_mt_report_finger_count
Instead of open-coded reporting number of fingers on the touchpad
let's use input_mt_report_finger_count() helper.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:32:33 -07:00
George Pantalos
3b7e09fad9 Input: ALPS - add semi-MT support for v4 protocol
This patch adds semi-MT support for ALPS v4 protocol touchpads.
It is based on the work by Seth Forshee for ALPS v3 and v4 protocol
support. Three packets are required to assemble and process the MT
data. ST events are reported at once to avoid latency. If there
were two contacts or more, report MT data instead of ST events.

Thanks to Seth Forshee for providing most of the code, guidance
and insight for producing this patch.

Signed-off-by: George Pantalos <gpantalos@gmail.com>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:32:20 -07:00
Paul Parsons
ae99ea562b Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver
This driver adds support for the Synaptics NavPoint touchpad connected
to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
a tap or tap-and-a-half drag gesture emulates the left mouse button.
For example, use the xf86-input-evdev driver for an X pointing device.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:12:39 -07:00
Daniel Kurtz
6ee3dbf93a Input: atmel_mxt_ts - dump each message on just 1 line
Helps ensure all bytes for a single message together in the system log.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:06 -07:00
Daniel Kurtz
822115ff4b Input: atmel_mxt_ts - do not read extra (checksum) byte
atmel_mxt devices will send a checksum byte at the end of a message if
the MSB of the object address is set.
However, since this driver does not set this bit, the checksum byte
isn't actually sent, so don't even try to read it.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:06 -07:00
Daniel Kurtz
d1ff320f0a Input: atmel_mxt_ts - verify object size in mxt_write_object
Don't allow writing past the length of an object.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:05 -07:00
Daniel Kurtz
71b3e938cb Input: atmel_mxt_ts - only allow root to update firmware
Restrict permissions on the update_fw sysfs entry to read only for root
only.

Also, update object permission to use a macro S_IRUGO macro instead of
hard coded 0444.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:05 -07:00
Daniel Kurtz
3a73c8169e Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
Simple cleanup to use newer PM APIs.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:04 -07:00
Tai-hwa Liang
d3132c5c95 Input: sentelic - report device's production serial number
Hardware since Cx supports an unique identity (used to identify OEM vendors
and released lot number) which is very helpful for diagnostic purpose.
This revision tries to make it as a part of driver boot up message.

Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of
absolute coordinates output.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:04 -07:00
Peter Ujfalusi
9ac7b1a36c Input: tl6040-vibra - Device Tree support
Enable DT based probing of the vibra driver.

Example of dts section to load the twl6040-vibra driver:
twl6040: twl6040@4b {
	...
	twl6040_vibra: twl6040@1 {
		compatible = "ti,twl6040-vibra";
		interrupts = <4>;
		vddvibl-supply = <&vbat>;
		vddvibr-supply = <&vbat>;
		vibldrv_res = <8>;
		vibrdrv_res = <3>;
		viblmotor_res = <10>;
		vibrmotor_res = <10>;
	};
};

[Sasha Levin <levinsasha928@gmail.com>: fixed build error]
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:37:46 -07:00
Olof Johansson
caafc71b1a DaVinci SoC updates for v3.5
This pull request updates the DaVinci SoC support to implement DEBUG_LL port
 choice and optimizes the DMA ISR by removing unnecessary register reads.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPqq+jAAoJEGFBu2jqvgRNs1MP/R1z0/h7nrN26aspSS9kxIJr
 M8HpG+qSmfLg+h6RSpQYY8SoMJ5mN7vA1AJQr9M2zUZXDYMy+AXYXdlJ2Q9p5ene
 A3Iz4yTfHgosrj9fd6fY7vH/Bd9v2T7H366SKPdk0gsSufzkSzEHvVkIROGLIQF2
 2kKgBdp94Vdgi+9nimePePIE5EyLxsMW3BNcFLVNkcdfZTFGlbtSav5zT4OCJoIm
 d/WI1Xh34nvzkHZptLqUwPF0u62YTcGY+Z6n6KhYk6mSJ2JHWfycwGOf7V9CFVkZ
 k7wdSaGfZbPrGQbKjK66Oahq+RN5kIklVB/GIyF5ZectxX+E+Mr8XLO8wKtCMxnf
 SvB9jy/LBIqPQlzodEy2FWryzh5gRB/KnDC3sYonpm81scYLEr9T1sw1k4yzR0cS
 ZgV2WfaqgfY9HoHzhoxwNB7hCo7VVHGL3r6BsB/30NUk8rnN/SGcDHdu5cTPT7gW
 qFfz4uGRC40kvUm2gq3yJh95r3iAnKmawFGjqhBSSMjHcPEVhEgsa913uSclR99w
 uKDWqsbhJN7h+W3nLPU7H4qq1PA+d3UGm7eWI8FBXxwf7qng00XJINBAssfxVRvJ
 xR0jC7/VeVypcvICPiKdDt2wxl80ptTF80461P0ieXKZsu/PXltLJXd+m7U/gq1u
 mhkE90gNGeSH7EsKC2A2
 =/we3
 -----END PGP SIGNATURE-----

Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers

DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
choice and optimizes the DMA ISR by removing unnecessary register reads.

* tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  + sync with Linux 3.4-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-10 00:23:17 -07:00
Olof Johansson
d5a2a1ba83 Linux 3.4-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPpvY9AAoJEHm+PkMAQRiGpEoIAJgbu+Y8gITnBK/wh9O6zy3S
 5jie5KK4YWdbJsvO58WbNr3CyVIwGIqQ2dUZLiU59aBVLarlGw8xor0MmW+cZwhp
 6fBHaf0qDYAV0MZjD+mnnExOiCRyISa2lPmsfu9dAWywh5KGe6/oAP6/qcXIyok3
 KZyl3qQf4ENpaZPHwZPXCEkUvtuyHgNiszN+QXEadA3s19Ot4VGe9A3VGw+GNrSm
 JqFIq3acQAbKa5BYaqf7TQC02v2FI7//eqt6QHxTqbE6a7LGbTvLfX3HlJ2mnfqa
 1R6QHhM4y4OZDHbaMT2raHZ8WuLXzhehJzhP8Co7AHFOKwVKOb5XbcUr2RrukMU=
 =HkMd
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc6' into next/cleanup

Linux 3.4-rc6

Resolve conflict where an u5500 file had a bugfix go in, but was
deleted in the branch staged for next merge window.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09 02:31:01 -07:00
Greg Kroah-Hartman
61906313bd Merge 3.4-rc6 into usb-next
This resolves the conflict with:
	drivers/usb/host/ehci-tegra.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 09:03:39 -07:00
Greg Kroah-Hartman
3b923993da USB: input: appletouch: fix up compiler warning
My last patch fixing up the dev_* messages caused a compiler warning
accidentally for an unused variable.  Fix this up, as it was my fault.

Cc: Alessandro Rubini <rubini@ipvvis.unipv.it>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:35:56 -07:00
Greg Kroah-Hartman
0a5ebc88c7 USB: input: usbtouchscreen.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Henrik Rydberg <rydberg@euromail.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Viresh Kumar <viresh.kumar@st.com>
CC: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:16 -07:00
Greg Kroah-Hartman
65e78a2062 USB: input: wacom_sys.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Ping Cheng <pingc@wacom.com>
CC: Chris Bagwell <chris@cnpbagwell.com>
CC: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:13 -07:00
Greg Kroah-Hartman
ed2b2f2db2 USB: input: kbtab.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:11 -07:00
Greg Kroah-Hartman
27c2597d45 USB: input: gtco.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:09 -07:00
Greg Kroah-Hartman
871ba51c13 USB: input: aiptek.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jesper Juhl <jj@chaosbits.net>
CC: JJ Ding <dgdunix@gmail.com>
CC: Edwin van Vliet <edwin@cheatah.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:06 -07:00
Greg Kroah-Hartman
334698d435 USB: input: acecad.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:04 -07:00
Greg Kroah-Hartman
ab943ca894 USB: input: bcm5974.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Henrik Rydberg <rydberg@euromail.se>
CC: Alessandro Rubini <rubini@ipvvis.unipv.it>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:02 -07:00
Greg Kroah-Hartman
2d744b0919 USB: input: appletouch.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Alessandro Rubini <rubini@ipvvis.unipv.it>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:01 -07:00
Greg Kroah-Hartman
73e66ceada USB: input: yealink.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Henk Vergonet <Henk.Vergonet@gmail.com>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:01 -07:00
Greg Kroah-Hartman
c25e647836 USB: input: powermate.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:33:00 -07:00
Greg Kroah-Hartman
419b1a11fb USB: input: keyspan_remote.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:32:58 -07:00
Greg Kroah-Hartman
ab242a73a1 USB: input: cm109.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:32:55 -07:00
Greg Kroah-Hartman
8818e4190f USB: input: xpad.c: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: "Magnus Hörlin" <magnus@alefors.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:32:53 -07:00
Greg Kroah-Hartman
a852d78e4e USB: input: iforce: fix up dev_* messages
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:23:04 -07:00
Arnd Bergmann
ced62c33fc ARM: i.MX cleanups for 3.5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJPoPBUAAoJEPFlmONMx+ez+x8P/1v4GU2XzwG2XBLrOeF1xzjO
 P1i3mYVN2aWGZ3ZGeVPvHd/X6Q2FiaajwFoiRVe1dOHCJwBDf0mFvYkQgaqAlk+D
 ZkhCPvshWtBG9uOSq47SAa4+Bw0O29kxPfTGsA1fyZoj/B0ZiyuTbPw53Fvgylmz
 7Jkl6Jh9dALI1Nb7P/xhGaeg4e7Out3U5f0ZITMuAJhMd1r2ikkV7BeQd77e/8hY
 xbzmQVCmWFtjK4iodHDrqKXgL7CVlAno8y6xiKtELipd1p+5Ao1BBlHkHg3bpjmb
 /G6YX86W9CVPU3jMhqLSoywiMX/PiElR559DPxPf/+8d5EaU1QsJyAU/D/zEb5D1
 Y5yi5jfrJFi2zEFYYDv5xHn/6M72JJT0HDQB8YBfs8n6uksDk+rZtoBZVlIbWBxC
 7vzvJ31712uxAtVeD5fbKOyVOgHRf6df8GByLR8Xi3Ak9ntMRfJSiEcxIrcqZ3dx
 M+A5S8g5Tbue5xDUu7cQG50OTu0t9JgoaSN3yHXnIesOXyMUylkatMEwpUamyGiD
 jX/DBmV7trwbe3re8SF7c2TTi2AfJsSFk840Ot9zfvuk7VaaZBjuC0tqmp0RyKIY
 kRlN0QGwn0+aNqRF74MWhDYsfnOXjdArcheW2szO5MiaUK9+85MLCQnvSoiV0Gkp
 flqaXKbjiUe/Oe83u+mC
 =7B/b
 -----END PGP SIGNATURE-----

Merge tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6 into next/cleanup

From:  Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX cleanups for 3.5

* tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6: (5 commits)
  ARM: mx53: fix pad definitions for MX53_PAD_EIM_D28__I2C1_SDA and MX53_PAD_GPIO_8__CAN1_RXCAN
  ARM: imx/eukrea_mbimx27-baseboard: fix typo in error message
  ARM: i.MX51 iomux: add missed definitions for SION-bit and mode for some pads
  arm: imx: add missing select IMX_HAVE_PLATFORM for MACH_MX35_3DS in Kconfig
  arm: imx: make various struct sys_timer static

Includes an update to 3.4-rc4

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-02 17:07:03 +02:00
Dmitry Torokhov
2872a9b521 Input: evdev - properly handle read/write with count 0
According to the standard count 0 is special - no IO should happen but we
can check error conditions (device gone away, etc), and return 0 if there
are no errors. We used to return -EINVAL instead and we also could return 0
if an event was "stolen" by another thread.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:23:58 -07:00
Dmitry Torokhov
dba4258068 Input: evdev - properly access RCU-protected 'grab' data
We should use rcu_dereference_protected() when checking if given client
is the one that grabbed the device. This fixes warnings produced by
sparse.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:23:14 -07:00
Stephen Warren
f31ad40669 Input: mpu3050 - set IRQF_ONESHOT when requesting the interrupt
Commit 1c6c695 "genirq: Reject bogus threaded irq requests" requires
that request_threaded_irq() either be passed an explicit handler, or
that IRQF_ONESHOT be set. Set this flag.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:22:45 -07:00
Dmitry Torokhov
46f49b7a22 Input: serio_raw - signal EFAULT even if read/write partially succeeds
When copy_to/from_user fails in the middle of transfer we should not
report to the user that read/write partially succeeded but rather
report -EFAULT right away, so that application will know that it got
its buffers all wrong.

If application messed up its buffers we can't trust the data fetched
from userspace and successfully written to the device or if data read
from the device and transferred to userspace ended up where application
expected it to end.

If serio_write() fails we still going to report partial writes if failure
happens in the middle of the transfer.

This is basically a revert of 7a0a27d2ce38aee19a31fee8c12095f586eed393
and 4fa0771138d0b56fe59ab8ab3b1ce9e594484362.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:21:13 -07:00
Dmitry Torokhov
eb71d1bb27 Input: wacom - use dev_xxx() instead of naked printk()s and dbg()s
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:20:51 -07:00
Dmitry Torokhov
a882c932a6 Input: wacom - return proper error if usb_get_extra_descriptor() fails
Instead of returning 1 (which is not even negative) let's capture and return
error codde returned by usb_get_extra_descriptor().

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:20:30 -07:00
Dmitry Torokhov
0c9e300ade Input: wacom - fix sparse warning
This fixes the following warning from sparse

	warning: Using plain integer as NULL pointer

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:19:52 -07:00
Greg Kroah-Hartman
b741ab9da6 USB: usbtouchscreen.c: remove dbg() usage
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Henrik Rydberg <rydberg@euromail.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Viresh Kumar <viresh.kumar@st.com>
CC: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:33:23 -07:00
Greg Kroah-Hartman
6d0f7dcba6 USB: kbtab.c: remove dbg() usage
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:33:20 -07:00
Greg Kroah-Hartman
c6f880a781 USB: gtco.c: remove dbg() usage
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:33:16 -07:00
Greg Kroah-Hartman
8fb6321b6b USB: aiptek.c: remove dbg() usage
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jesper Juhl <jj@chaosbits.net>
CC: JJ Ding <dgdunix@gmail.com>
CC: Edwin van Vliet <edwin@cheatah.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:33:12 -07:00
Greg Kroah-Hartman
eeba1ae13c USB: acecad.c: remove dbg() usage
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:33:09 -07:00
Greg Kroah-Hartman
bd028769f7 USB: bcm5974.c: remove dbg() usage
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

CC: Henrik Rydberg <rydberg@euromail.se>
CC: Alessandro Rubini <rubini@ipvvis.unipv.it>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:33:05 -07:00