Commit Graph

652 Commits

Author SHA1 Message Date
John Johansen
15756178c6 apparmor: add missing id bounds check on dfa verification
Signed-off-by: John Johansen <john.johansen@canonical.com>
2016-07-12 08:43:10 -07:00
Jeff Mahoney
ff118479a7 apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
While using AppArmor, SYS_CAP_RESOURCE is insufficient to call prlimit
on another task. The only other example of a AppArmor mediating access to
another, already running, task (ignoring fork+exec) is ptrace.

The AppArmor model for ptrace is that one of the following must be true:
1) The tracer is unconfined
2) The tracer is in complain mode
3) The tracer and tracee are confined by the same profile
4) The tracer is confined but has SYS_CAP_PTRACE

1), 2, and 3) are already true for setrlimit.

We can match the ptrace model just by allowing CAP_SYS_RESOURCE.

We still test the values of the rlimit since it can always be overridden
using a value that means unlimited for a particular resource.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2016-07-12 08:43:10 -07:00
Geliang Tang
38dbd7d8be apparmor: use list_next_entry instead of list_entry_next
list_next_entry has been defined in list.h, so I replace list_entry_next
with it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
de7c4cc947 apparmor: fix refcount race when finding a child profile
When finding a child profile via an rcu critical section, the profile
may be put and scheduled for deletion after the child is found but
before its refcount is incremented.

Protect against this by repeating the lookup if the profiles refcount
is 0 and is one its way to deletion.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
0b938a2e2c apparmor: fix ref count leak when profile sha1 hash is read
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
23ca7b640b apparmor: check that xindex is in trans_table bounds
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
f7da2de011 apparmor: ensure the target profile name is always audited
The target profile name was not being correctly audited in a few
cases because the target variable was not being set and gotos
passed the code to set it at apply:

Since it is always based on new_profile just drop the target var
and conditionally report based on new_profile.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
7ee6da25dc apparmor: fix audit full profile hname on successful load
Currently logging of a successful profile load only logs the basename
of the profile. This can result in confusion when a child profile has
the same name as the another profile in the set. Logging the hname
will ensure there is no confusion.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
bf15cf0c64 apparmor: fix log failures for all profiles in a set
currently only the profile that is causing the failure is logged. This
makes it more confusing than necessary about which profiles loaded
and which didn't. So make sure to log success and failure messages for
all profiles in the set being loaded.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
f351841f8d apparmor: fix put() parent ref after updating the active ref
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
6059f71f1e apparmor: add parameter to control whether policy hashing is used
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
bd35db8b8c apparmor: internal paths should be treated as disconnected
Internal mounts are not mounted anywhere and as such should be treated
as disconnected paths.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
f2e561d190 apparmor: fix disconnected bind mnts reconnection
Bind mounts can fail to be properly reconnected when PATH_CONNECT is
specified. Ensure that when PATH_CONNECT is specified the path has
a root.

BugLink: http://bugs.launchpad.net/bugs/1319984

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
d671e89020 apparmor: fix update the mtime of the profile file on replacement
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
9049a79221 apparmor: exec should not be returning ENOENT when it denies
The current behavior is confusing as it causes exec failures to report
the executable is missing instead of identifying that apparmor
caused the failure.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
b6b1b81b3a apparmor: fix uninitialized lsm_audit member
BugLink: http://bugs.launchpad.net/bugs/1268727

The task field in the lsm_audit struct needs to be initialized if
a change_hat fails, otherwise the following oops will occur

BUG: unable to handle kernel paging request at 0000002fbead7d08
IP: [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50
PGD 1e3f35067 PUD 0
Oops: 0002 [#1] SMP
Modules linked in: pppox crc_ccitt p8023 p8022 psnap llc ax25 btrfs raid6_pq xor xfs libcrc32c dm_multipath scsi_dh kvm_amd dcdbas kvm microcode amd64_edac_mod joydev edac_core psmouse edac_mce_amd serio_raw k10temp sp5100_tco i2c_piix4 ipmi_si ipmi_msghandler acpi_power_meter mac_hid lp parport hid_generic usbhid hid pata_acpi mpt2sas ahci raid_class pata_atiixp bnx2 libahci scsi_transport_sas [last unloaded: tipc]
CPU: 2 PID: 699 Comm: changehat_twice Tainted: GF          O 3.13.0-7-generic #25-Ubuntu
Hardware name: Dell Inc. PowerEdge R415/08WNM9, BIOS 1.8.6 12/06/2011
task: ffff8802135c6000 ti: ffff880212986000 task.ti: ffff880212986000
RIP: 0010:[<ffffffff8171153e>]  [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50
RSP: 0018:ffff880212987b68  EFLAGS: 00010006
RAX: 0000000000020000 RBX: 0000002fbead7500 RCX: 0000000000000000
RDX: 0000000000000292 RSI: ffff880212987ba8 RDI: 0000002fbead7d08
RBP: ffff880212987b68 R08: 0000000000000246 R09: ffff880216e572a0
R10: ffffffff815fd677 R11: ffffea0008469580 R12: ffffffff8130966f
R13: ffff880212987ba8 R14: 0000002fbead7d08 R15: ffff8800d8c6b830
FS:  00002b5e6c84e7c0(0000) GS:ffff880216e40000(0000) knlGS:0000000055731700
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000002fbead7d08 CR3: 000000021270f000 CR4: 00000000000006e0
Stack:
 ffff880212987b98 ffffffff81075f17 ffffffff8130966f 0000000000000009
 0000000000000000 0000000000000000 ffff880212987bd0 ffffffff81075f7c
 0000000000000292 ffff880212987c08 ffff8800d8c6b800 0000000000000026
Call Trace:
 [<ffffffff81075f17>] __lock_task_sighand+0x47/0x80
 [<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50
 [<ffffffff81075f7c>] do_send_sig_info+0x2c/0x80
 [<ffffffff81075fee>] send_sig_info+0x1e/0x30
 [<ffffffff8130242d>] aa_audit+0x13d/0x190
 [<ffffffff8130c1dc>] aa_audit_file+0xbc/0x130
 [<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50
 [<ffffffff81304cc2>] aa_change_hat+0x202/0x530
 [<ffffffff81308fc6>] aa_setprocattr_changehat+0x116/0x1d0
 [<ffffffff8130a11d>] apparmor_setprocattr+0x25d/0x300
 [<ffffffff812cee56>] security_setprocattr+0x16/0x20
 [<ffffffff8121fc87>] proc_pid_attr_write+0x107/0x130
 [<ffffffff811b7604>] vfs_write+0xb4/0x1f0
 [<ffffffff811b8039>] SyS_write+0x49/0xa0
 [<ffffffff8171a1bf>] tracesys+0xe1/0xe6

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
ec34fa24a9 apparmor: fix replacement bug that adds new child to old parent
When set atomic replacement is used and the parent is updated before the
child, and the child did not exist in the old parent so there is no
direct replacement then the new child is incorrectly added to the old
parent. This results in the new parent not having the child(ren) that
it should and the old parent when being destroyed asserting the
following error.

AppArmor: policy_destroy: internal error, policy '<profile/name>' still
contains profiles

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
John Johansen
dcda617a0c apparmor: fix refcount bug in profile replacement
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2016-07-12 08:43:10 -07:00
Al Viro
3ccee46ab4 constify security_path_{link,rename}
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:36 -04:00
Al Viro
8db0185659 apparmor: remove useless checks for NULL ->mnt
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:28 -04:00
Al Viro
d360775217 constify security_path_{mkdir,mknod,symlink}
... as well as unix_mknod() and may_o_create()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:27 -04:00
Al Viro
989f74e050 constify security_path_{unlink,rmdir}
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:27 -04:00
Al Viro
d6b49f7ad2 apparmor: constify common_perm_...()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:26 -04:00
Al Viro
3539aaf670 apparmor: constify aa_path_link()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:26 -04:00
Al Viro
741aca71d6 apparmor: new helper - common_path_perm()
was open-coded in several places...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:25 -04:00
Al Viro
be01f9f28e constify chmod_common/security_path_chmod
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:25 -04:00
Al Viro
7fd25dac9a constify chown_common/security_path_chown
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:24 -04:00
Al Viro
928e1ebfb5 apparmor_path_truncate(): path->mnt is never NULL
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:23 -04:00
Al Viro
81f4c50607 constify security_path_truncate()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:46:54 -04:00
Al Viro
2c7661ff41 [apparmor] constify struct path * in a bunch of helpers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-27 23:48:14 -04:00
Arnd Bergmann
083c1290ca apparmor: clarify CRYPTO dependency
The crypto framework can be built as a loadable module, but the
apparmor hash code can only be built-in, which then causes a
link error:

security/built-in.o: In function `aa_calc_profile_hash':
integrity_audit.c:(.text+0x21610): undefined reference to `crypto_shash_update'
security/built-in.o: In function `init_profile_hash':
integrity_audit.c:(.init.text+0xb4c): undefined reference to `crypto_alloc_shash'

This changes Apparmor to use 'select CRYPTO' like a lot of other
subsystems do.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-10-22 11:11:28 +11:00
Linus Torvalds
02201e3f1b Minor merge needed, due to function move.
Main excitement here is Peter Zijlstra's lockless rbtree optimization to
 speed module address lookup.  He found some abusers of the module lock
 doing that too.
 
 A little bit of parameter work here too; including Dan Streetman's breaking
 up the big param mutex so writing a parameter can load another module (yeah,
 really).  Unfortunately that broke the usual suspects, !CONFIG_MODULES and
 !CONFIG_SYSFS, so those fixes were appended too.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkgKHAAoJENkgDmzRrbjxQpwQAJVmBN6jF3SnwbQXv9vRixjH
 58V33sb1G1RW+kXxQ3/e8jLX/4VaN479CufruXQp+IJWXsN/CH0lbC3k8m7u50d7
 b1Zeqd/Yrh79rkc11b0X1698uGCSMlzz+V54Z0QOTEEX+nSu2ZZvccFS4UaHkn3z
 rqDo00lb7rxQz8U25qro2OZrG6D3ub2q20TkWUB8EO4AOHkPn8KWP2r429Axrr0K
 wlDWDTTt8/IsvPbuPf3T15RAhq1avkMXWn9nDXDjyWbpLfTn8NFnWmtesgY7Jl4t
 GjbXC5WYekX3w2ZDB9KaT/DAMQ1a7RbMXNSz4RX4VbzDl+yYeSLmIh2G9fZb1PbB
 PsIxrOgy4BquOWsJPm+zeFPSC3q9Cfu219L4AmxSjiZxC3dlosg5rIB892Mjoyv4
 qxmg6oiqtc4Jxv+Gl9lRFVOqyHZrTC5IJ+xgfv1EyP6kKMUKLlDZtxZAuQxpUyxR
 HZLq220RYnYSvkWauikq4M8fqFM8bdt6hLJnv7bVqllseROk9stCvjSiE3A9szH5
 OgtOfYV5GhOeb8pCZqJKlGDw+RoJ21jtNCgOr6DgkNKV9CX/kL/Puwv8gnA0B0eh
 dxCeB7f/gcLl7Cg3Z3gVVcGlgak6JWrLf5ITAJhBZ8Lv+AtL2DKmwEWS/iIMRmek
 tLdh/a9GiCitqS0bT7GE
 =tWPQ
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Main excitement here is Peter Zijlstra's lockless rbtree optimization
  to speed module address lookup.  He found some abusers of the module
  lock doing that too.

  A little bit of parameter work here too; including Dan Streetman's
  breaking up the big param mutex so writing a parameter can load
  another module (yeah, really).  Unfortunately that broke the usual
  suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
  appended too"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
  modules: only use mod->param_lock if CONFIG_MODULES
  param: fix module param locks when !CONFIG_SYSFS.
  rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
  module: add per-module param_lock
  module: make perm const
  params: suppress unused variable error, warn once just in case code changes.
  modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
  kernel/module.c: avoid ifdefs for sig_enforce declaration
  kernel/workqueue.c: remove ifdefs over wq_power_efficient
  kernel/params.c: export param_ops_bool_enable_only
  kernel/params.c: generalize bool_enable_only
  kernel/module.c: use generic module param operaters for sig_enforce
  kernel/params: constify struct kernel_param_ops uses
  sysfs: tightened sysfs permission checks
  module: Rework module_addr_{min,max}
  module: Use __module_address() for module_address_lookup()
  module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
  module: Optimize __module_address() using a latched RB-tree
  rbtree: Implement generic latch_tree
  seqlock: Introduce raw_read_seqcount_latch()
  ...
2015-07-01 10:49:25 -07:00
Luis R. Rodriguez
9c27847dda kernel/params: constify struct kernel_param_ops uses
Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.

In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.

Test compiled on x86_64 against:

	* allnoconfig
	* allmodconfig
	* allyesconfig

@ const_found @
identifier ops;
@@

const struct kernel_param_ops ops = {
};

@ const_not_found depends on !const_found @
identifier ops;
@@

-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};

Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28 11:32:10 +09:30
Casey Schaufler
b1d9e6b064 LSM: Switch to lists of hooks
Instead of using a vector of security operations
with explicit, special case stacking of the capability
and yama hooks use lists of hooks with capability and
yama hooks included as appropriate.

The security_operations structure is no longer required.
Instead, there is a union of the function pointers that
allows all the hooks lists to use a common mechanism for
list management while retaining typing. Each module
supplies an array describing the hooks it provides instead
of a sparsely populated security_operations structure.
The description includes the element that gets put on
the hook list, avoiding the issues surrounding individual
element allocation.

The method for registering security modules is changed to
reflect the information available. The method for removing
a module, currently only used by SELinux, has also changed.
It should be generic now, however if there are potential
race conditions based on ordering of hook removal that needs
to be addressed by the calling module.

The security hooks are called from the lists and the first
failure is returned.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-05-12 15:00:41 +10:00
Casey Schaufler
e20b043a69 LSM: Add security module hook list heads
Add a list header for each security hook. They aren't used until
later in the patch series. They are grouped together in a structure
so that there doesn't need to be an external address for each.

Macro-ize the initialization of the security_operations
for each security module in anticipation of changing out
the security_operations structure.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-05-12 15:00:36 +10:00
Casey Schaufler
3c4ed7bdf5 LSM: Split security.h
The security.h header file serves two purposes,
interfaces for users of the security modules and
interfaces for security modules. Users of the
security modules don't need to know about what's
in the security_operations structure, so pull it
out into it's own header, lsm_hooks.h

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-05-12 15:00:16 +10:00
David Howells
ce0b16ddf1 VFS: security/: d_inode() annotations
... except where that code acts as a filesystem driver, rather than
working with dentries given to it.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
David Howells
c6f493d631 VFS: security/: d_backing_inode() annotations
most of the ->d_inode uses there refer to the same inode IO would
go to, i.e. d_backing_inode()

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:56 -04:00
Al Viro
3f7036a071 switch security_inode_getattr() to struct path *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:24:32 -04:00
David Howells
729b8a3dee Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing
dentry->d_inode as the dentry may cover another layer that has an inode when
the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:39 -05:00
David Howells
7ac2856d99 Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and
should avoid file_inode() also since it is really dealing with the path.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:39 -05:00
Jani Nikula
6a4c264313 module: rename KERNEL_PARAM_FL_NOARG to avoid confusion
Make it clear this is about kernel_param_ops, not kernel_param (which
will soon have a flags field of its own). No functional changes.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Jon Mason <jon.mason@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 21:54:07 +09:30
Kees Cook
1d4457f999 sched: move no_new_privs into new atomic flags
Since seccomp transitions between threads requires updates to the
no_new_privs flag to be atomic, the flag must be part of an atomic flag
set. This moves the nnp flag into a separate task field, and introduces
accessors.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-07-18 12:13:38 -07:00
Al Viro
39f1f78d53 nick kvfree() from apparmor
too many places open-code it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 14:02:53 -04:00
Jingoo Han
29707b206c security: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-02-06 19:11:04 +11:00
Linus Torvalds
78dc53c422 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "In this patchset, we finally get an SELinux update, with Paul Moore
  taking over as maintainer of that code.

  Also a significant update for the Keys subsystem, as well as
  maintenance updates to Smack, IMA, TPM, and Apparmor"

and since I wanted to know more about the updates to key handling,
here's the explanation from David Howells on that:

 "Okay.  There are a number of separate bits.  I'll go over the big bits
  and the odd important other bit, most of the smaller bits are just
  fixes and cleanups.  If you want the small bits accounting for, I can
  do that too.

   (1) Keyring capacity expansion.

        KEYS: Consolidate the concept of an 'index key' for key access
        KEYS: Introduce a search context structure
        KEYS: Search for auth-key by name rather than target key ID
        Add a generic associative array implementation.
        KEYS: Expand the capacity of a keyring

     Several of the patches are providing an expansion of the capacity of a
     keyring.  Currently, the maximum size of a keyring payload is one page.
     Subtract a small header and then divide up into pointers, that only gives
     you ~500 pointers on an x86_64 box.  However, since the NFS idmapper uses
     a keyring to store ID mapping data, that has proven to be insufficient to
     the cause.

     Whatever data structure I use to handle the keyring payload, it can only
     store pointers to keys, not the keys themselves because several keyrings
     may point to a single key.  This precludes inserting, say, and rb_node
     struct into the key struct for this purpose.

     I could make an rbtree of records such that each record has an rb_node
     and a key pointer, but that would use four words of space per key stored
     in the keyring.  It would, however, be able to use much existing code.

     I selected instead a non-rebalancing radix-tree type approach as that
     could have a better space-used/key-pointer ratio.  I could have used the
     radix tree implementation that we already have and insert keys into it by
     their serial numbers, but that means any sort of search must iterate over
     the whole radix tree.  Further, its nodes are a bit on the capacious side
     for what I want - especially given that key serial numbers are randomly
     allocated, thus leaving a lot of empty space in the tree.

     So what I have is an associative array that internally is a radix-tree
     with 16 pointers per node where the index key is constructed from the key
     type pointer and the key description.  This means that an exact lookup by
     type+description is very fast as this tells us how to navigate directly to
     the target key.

     I made the data structure general in lib/assoc_array.c as far as it is
     concerned, its index key is just a sequence of bits that leads to a
     pointer.  It's possible that someone else will be able to make use of it
     also.  FS-Cache might, for example.

   (2) Mark keys as 'trusted' and keyrings as 'trusted only'.

        KEYS: verify a certificate is signed by a 'trusted' key
        KEYS: Make the system 'trusted' keyring viewable by userspace
        KEYS: Add a 'trusted' flag and a 'trusted only' flag
        KEYS: Separate the kernel signature checking keyring from module signing

     These patches allow keys carrying asymmetric public keys to be marked as
     being 'trusted' and allow keyrings to be marked as only permitting the
     addition or linkage of trusted keys.

     Keys loaded from hardware during kernel boot or compiled into the kernel
     during build are marked as being trusted automatically.  New keys can be
     loaded at runtime with add_key().  They are checked against the system
     keyring contents and if their signatures can be validated with keys that
     are already marked trusted, then they are marked trusted also and can
     thus be added into the master keyring.

     Patches from Mimi Zohar make this usable with the IMA keyrings also.

   (3) Remove the date checks on the key used to validate a module signature.

        X.509: Remove certificate date checks

     It's not reasonable to reject a signature just because the key that it was
     generated with is no longer valid datewise - especially if the kernel
     hasn't yet managed to set the system clock when the first module is
     loaded - so just remove those checks.

   (4) Make it simpler to deal with additional X.509 being loaded into the kernel.

        KEYS: Load *.x509 files into kernel keyring
        KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate

     The builder of the kernel now just places files with the extension ".x509"
     into the kernel source or build trees and they're concatenated by the
     kernel build and stuffed into the appropriate section.

   (5) Add support for userspace kerberos to use keyrings.

        KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
        KEYS: Implement a big key type that can save to tmpfs

     Fedora went to, by default, storing kerberos tickets and tokens in tmpfs.
     We looked at storing it in keyrings instead as that confers certain
     advantages such as tickets being automatically deleted after a certain
     amount of time and the ability for the kernel to get at these tokens more
     easily.

     To make this work, two things were needed:

     (a) A way for the tickets to persist beyond the lifetime of all a user's
         sessions so that cron-driven processes can still use them.

         The problem is that a user's session keyrings are deleted when the
         session that spawned them logs out and the user's user keyring is
         deleted when the UID is deleted (typically when the last log out
         happens), so neither of these places is suitable.

         I've added a system keyring into which a 'persistent' keyring is
         created for each UID on request.  Each time a user requests their
         persistent keyring, the expiry time on it is set anew.  If the user
         doesn't ask for it for, say, three days, the keyring is automatically
         expired and garbage collected using the existing gc.  All the kerberos
         tokens it held are then also gc'd.

     (b) A key type that can hold really big tickets (up to 1MB in size).

         The problem is that Active Directory can return huge tickets with lots
         of auxiliary data attached.  We don't, however, want to eat up huge
         tracts of unswappable kernel space for this, so if the ticket is
         greater than a certain size, we create a swappable shmem file and dump
         the contents in there and just live with the fact we then have an
         inode and a dentry overhead.  If the ticket is smaller than that, we
         slap it in a kmalloc()'d buffer"

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits)
  KEYS: Fix keyring content gc scanner
  KEYS: Fix error handling in big_key instantiation
  KEYS: Fix UID check in keyctl_get_persistent()
  KEYS: The RSA public key algorithm needs to select MPILIB
  ima: define '_ima' as a builtin 'trusted' keyring
  ima: extend the measurement list to include the file signature
  kernel/system_certificate.S: use real contents instead of macro GLOBAL()
  KEYS: fix error return code in big_key_instantiate()
  KEYS: Fix keyring quota misaccounting on key replacement and unlink
  KEYS: Fix a race between negating a key and reading the error set
  KEYS: Make BIG_KEYS boolean
  apparmor: remove the "task" arg from may_change_ptraced_domain()
  apparmor: remove parent task info from audit logging
  apparmor: remove tsk field from the apparmor_audit_struct
  apparmor: fix capability to not use the current task, during reporting
  Smack: Ptrace access check mode
  ima: provide hash algo info in the xattr
  ima: enable support for larger default filedata hash algorithms
  ima: define kernel parameter 'ima_template=' to change configured default
  ima: add Kconfig default measurement list template
  ...
2013-11-21 19:46:00 -08:00
Oleg Nesterov
51775fe736 apparmor: remove the "task" arg from may_change_ptraced_domain()
Unless task == current ptrace_parent(task) is not safe even under
rcu_read_lock() and most of the current users are not right.

So may_change_ptraced_domain(task) looks wrong as well. However it
is always called with task == current so the code is actually fine.
Remove this argument to make this fact clear.

Note: perhaps we should simply kill ptrace_parent(), it buys almost
nothing. And it is obviously racy, perhaps this should be fixed.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-10-29 21:34:18 -07:00
John Johansen
4a7fc3018f apparmor: remove parent task info from audit logging
The reporting of the parent task info is a vestage from old versions of
apparmor. The need for this information was removed by unique null-
profiles before apparmor was upstreamed so remove this info from logging.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-10-29 21:34:04 -07:00
John Johansen
61e3fb8aca apparmor: remove tsk field from the apparmor_audit_struct
Now that aa_capabile no longer sets the task field it can be removed
and the lsm_audit version of the field can be used.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-10-29 21:33:52 -07:00
John Johansen
dd0c6e86f6 apparmor: fix capability to not use the current task, during reporting
Mediation is based off of the cred but auditing includes the current
task which may not be related to the actual request.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-10-29 21:33:37 -07:00
John Johansen
ed2c7da3a4 apparmor: fix bad lock balance when introspecting policy
BugLink: http://bugs.launchpad.net/bugs/1235977

The profile introspection seq file has a locking bug when policy is viewed
from a virtual root (task in a policy namespace), introspection from the
real root is not affected.

The test for root
    while (parent) {
is correct for the real root, but incorrect for tasks in a policy namespace.
This allows the task to walk backup the policy tree past its virtual root
causing it to be unlocked before the virtual root should be in the p_stop
fn.

This results in the following lockdep back trace:
[   78.479744] [ BUG: bad unlock balance detected! ]
[   78.479792] 3.11.0-11-generic #17 Not tainted
[   78.479838] -------------------------------------
[   78.479885] grep/2223 is trying to release lock (&ns->lock) at:
[   78.479952] [<ffffffff817bf3be>] mutex_unlock+0xe/0x10
[   78.480002] but there are no more locks to release!
[   78.480037]
[   78.480037] other info that might help us debug this:
[   78.480037] 1 lock held by grep/2223:
[   78.480037]  #0:  (&p->lock){+.+.+.}, at: [<ffffffff812111bd>] seq_read+0x3d/0x3d0
[   78.480037]
[   78.480037] stack backtrace:
[   78.480037] CPU: 0 PID: 2223 Comm: grep Not tainted 3.11.0-11-generic #17
[   78.480037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   78.480037]  ffffffff817bf3be ffff880007763d60 ffffffff817b97ef ffff8800189d2190
[   78.480037]  ffff880007763d88 ffffffff810e1c6e ffff88001f044730 ffff8800189d2190
[   78.480037]  ffffffff817bf3be ffff880007763e00 ffffffff810e5bd6 0000000724fe56b7
[   78.480037] Call Trace:
[   78.480037]  [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10
[   78.480037]  [<ffffffff817b97ef>] dump_stack+0x54/0x74
[   78.480037]  [<ffffffff810e1c6e>] print_unlock_imbalance_bug+0xee/0x100
[   78.480037]  [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10
[   78.480037]  [<ffffffff810e5bd6>] lock_release_non_nested+0x226/0x300
[   78.480037]  [<ffffffff817bf2fe>] ? __mutex_unlock_slowpath+0xce/0x180
[   78.480037]  [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10
[   78.480037]  [<ffffffff810e5d5c>] lock_release+0xac/0x310
[   78.480037]  [<ffffffff817bf2b3>] __mutex_unlock_slowpath+0x83/0x180
[   78.480037]  [<ffffffff817bf3be>] mutex_unlock+0xe/0x10
[   78.480037]  [<ffffffff81376c91>] p_stop+0x51/0x90
[   78.480037]  [<ffffffff81211408>] seq_read+0x288/0x3d0
[   78.480037]  [<ffffffff811e9d9e>] vfs_read+0x9e/0x170
[   78.480037]  [<ffffffff811ea8cc>] SyS_read+0x4c/0xa0
[   78.480037]  [<ffffffff817ccc9d>] system_call_fastpath+0x1a/0x1f

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-10-16 11:54:01 +11:00
John Johansen
5cb3e91ebd apparmor: fix memleak of the profile hash
BugLink: http://bugs.launchpad.net/bugs/1235523

This fixes the following kmemleak trace:
unreferenced object 0xffff8801e8c35680 (size 32):
  comm "apparmor_parser", pid 691, jiffies 4294895667 (age 13230.876s)
  hex dump (first 32 bytes):
    e0 d3 4e b5 ac 6d f4 ed 3f cb ee 48 1c fd 40 cf  ..N..m..?..H..@.
    5b cc e9 93 00 00 00 00 00 00 00 00 00 00 00 00  [...............
  backtrace:
    [<ffffffff817a97ee>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811ca9f3>] __kmalloc+0x103/0x290
    [<ffffffff8138acbc>] aa_calc_profile_hash+0x6c/0x150
    [<ffffffff8138074d>] aa_unpack+0x39d/0xd50
    [<ffffffff8137eced>] aa_replace_profiles+0x3d/0xd80
    [<ffffffff81376937>] profile_replace+0x37/0x50
    [<ffffffff811e9f2d>] vfs_write+0xbd/0x1e0
    [<ffffffff811ea96c>] SyS_write+0x4c/0xa0
    [<ffffffff817ccb1d>] system_call_fastpath+0x1a/0x1f
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-10-16 11:53:59 +11:00
John Johansen
4cd4fc7703 apparmor: fix suspicious RCU usage warning in policy.c/policy.h
The recent 3.12 pull request for apparmor was missing a couple rcu _protected
access modifiers. Resulting in the follow suspicious RCU usage

 [   29.804534] [ INFO: suspicious RCU usage. ]
 [   29.804539] 3.11.0+ #5 Not tainted
 [   29.804541] -------------------------------
 [   29.804545] security/apparmor/include/policy.h:363 suspicious rcu_dereference_check() usage!
 [   29.804548]
 [   29.804548] other info that might help us debug this:
 [   29.804548]
 [   29.804553]
 [   29.804553] rcu_scheduler_active = 1, debug_locks = 1
 [   29.804558] 2 locks held by apparmor_parser/1268:
 [   29.804560]  #0:  (sb_writers#9){.+.+.+}, at: [<ffffffff81120a4c>] file_start_write+0x27/0x29
 [   29.804576]  #1:  (&ns->lock){+.+.+.}, at: [<ffffffff811f5d88>] aa_replace_profiles+0x166/0x57c
 [   29.804589]
 [   29.804589] stack backtrace:
 [   29.804595] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5
 [   29.804599] Hardware name: ASUSTeK Computer Inc.         UL50VT          /UL50VT    , BIOS 217     03/01/2010
 [   29.804602]  0000000000000000 ffff8800b95a1d90 ffffffff8144eb9b ffff8800b94db540
 [   29.804611]  ffff8800b95a1dc0 ffffffff81087439 ffff880138cc3a18 ffff880138cc3a18
 [   29.804619]  ffff8800b9464a90 ffff880138cc3a38 ffff8800b95a1df0 ffffffff811f5084
 [   29.804628] Call Trace:
 [   29.804636]  [<ffffffff8144eb9b>] dump_stack+0x4e/0x82
 [   29.804642]  [<ffffffff81087439>] lockdep_rcu_suspicious+0xfc/0x105
 [   29.804649]  [<ffffffff811f5084>] __aa_update_replacedby+0x53/0x7f
 [   29.804655]  [<ffffffff811f5408>] __replace_profile+0x11f/0x1ed
 [   29.804661]  [<ffffffff811f6032>] aa_replace_profiles+0x410/0x57c
 [   29.804668]  [<ffffffff811f16d4>] profile_replace+0x35/0x4c
 [   29.804674]  [<ffffffff81120fa3>] vfs_write+0xad/0x113
 [   29.804680]  [<ffffffff81121609>] SyS_write+0x44/0x7a
 [   29.804687]  [<ffffffff8145bfd2>] system_call_fastpath+0x16/0x1b
 [   29.804691]
 [   29.804694] ===============================
 [   29.804697] [ INFO: suspicious RCU usage. ]
 [   29.804700] 3.11.0+ #5 Not tainted
 [   29.804703] -------------------------------
 [   29.804706] security/apparmor/policy.c:566 suspicious rcu_dereference_check() usage!
 [   29.804709]
 [   29.804709] other info that might help us debug this:
 [   29.804709]
 [   29.804714]
 [   29.804714] rcu_scheduler_active = 1, debug_locks = 1
 [   29.804718] 2 locks held by apparmor_parser/1268:
 [   29.804721]  #0:  (sb_writers#9){.+.+.+}, at: [<ffffffff81120a4c>] file_start_write+0x27/0x29
 [   29.804733]  #1:  (&ns->lock){+.+.+.}, at: [<ffffffff811f5d88>] aa_replace_profiles+0x166/0x57c
 [   29.804744]
 [   29.804744] stack backtrace:
 [   29.804750] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5
 [   29.804753] Hardware name: ASUSTeK Computer Inc.         UL50VT          /UL50VT    , BIOS 217     03/01/2010
 [   29.804756]  0000000000000000 ffff8800b95a1d80 ffffffff8144eb9b ffff8800b94db540
 [   29.804764]  ffff8800b95a1db0 ffffffff81087439 ffff8800b95b02b0 0000000000000000
 [   29.804772]  ffff8800b9efba08 ffff880138cc3a38 ffff8800b95a1dd0 ffffffff811f4f94
 [   29.804779] Call Trace:
 [   29.804786]  [<ffffffff8144eb9b>] dump_stack+0x4e/0x82
 [   29.804791]  [<ffffffff81087439>] lockdep_rcu_suspicious+0xfc/0x105
 [   29.804798]  [<ffffffff811f4f94>] aa_free_replacedby_kref+0x4d/0x62
 [   29.804804]  [<ffffffff811f4f47>] ? aa_put_namespace+0x17/0x17
 [   29.804810]  [<ffffffff811f4f0b>] kref_put+0x36/0x40
 [   29.804816]  [<ffffffff811f5423>] __replace_profile+0x13a/0x1ed
 [   29.804822]  [<ffffffff811f6032>] aa_replace_profiles+0x410/0x57c
 [   29.804829]  [<ffffffff811f16d4>] profile_replace+0x35/0x4c
 [   29.804835]  [<ffffffff81120fa3>] vfs_write+0xad/0x113
 [   29.804840]  [<ffffffff81121609>] SyS_write+0x44/0x7a
 [   29.804847]  [<ffffffff8145bfd2>] system_call_fastpath+0x16/0x1b

Reported-by: miles.lane@gmail.com
CC: paulmck@linux.vnet.ibm.com
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-09-30 09:54:01 +10:00
Tyler Hicks
71ac7f6255 apparmor: Use shash crypto API interface for profile hashes
Use the shash interface, rather than the hash interface, when hashing
AppArmor profiles. The shash interface does not use scatterlists and it
is a better fit for what AppArmor needs.

This fixes a kernel paging BUG when aa_calc_profile_hash() is passed a
buffer from vmalloc(). The hash interface requires callers to handle
vmalloc() buffers differently than what AppArmor was doing. Due to
vmalloc() memory not being physically contiguous, each individual page
behind the buffer must be assigned to a scatterlist with sg_set_page()
and then the scatterlist passed to crypto_hash_update().

The shash interface does not have that limitation and allows vmalloc()
and kmalloc() buffers to be handled in the same manner.

BugLink: https://launchpad.net/bugs/1216294/
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=62261

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-09-30 09:53:59 +10:00
Linus Torvalds
11c7b03d42 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "Nothing major for this kernel, just maintenance updates"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (21 commits)
  apparmor: add the ability to report a sha1 hash of loaded policy
  apparmor: export set of capabilities supported by the apparmor module
  apparmor: add the profile introspection file to interface
  apparmor: add an optional profile attachment string for profiles
  apparmor: add interface files for profiles and namespaces
  apparmor: allow setting any profile into the unconfined state
  apparmor: make free_profile available outside of policy.c
  apparmor: rework namespace free path
  apparmor: update how unconfined is handled
  apparmor: change how profile replacement update is done
  apparmor: convert profile lists to RCU based locking
  apparmor: provide base for multiple profiles to be replaced at once
  apparmor: add a features/policy dir to interface
  apparmor: enable users to query whether apparmor is enabled
  apparmor: remove minimum size check for vmalloc()
  Smack: parse multiple rules per write to load2, up to PAGE_SIZE-1 bytes
  Smack: network label match fix
  security: smack: add a hash table to quicken smk_find_entry()
  security: smack: fix memleak in smk_write_rules_list()
  xattr: Constify ->name member of "struct xattr".
  ...
2013-09-07 14:34:07 -07:00
Steven Rostedt
5265fc6219 module/lsm: Have apparmor module parameters work with no args
The apparmor module parameters for param_ops_aabool and
param_ops_aalockpolicy are both based off of the param_ops_bool,
and can handle a NULL value passed in as val. Have it enable the
new KERNEL_PARAM_FL_NOARGS flag to allow the parameters to be set
without having to state "=y" or "=1".

Cc: John Johansen <john.johansen@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-08-20 15:37:44 +09:30
John Johansen
f8eb8a1324 apparmor: add the ability to report a sha1 hash of loaded policy
Provide userspace the ability to introspect a sha1 hash value for each
profile currently loaded.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2013-08-14 11:42:08 -07:00
John Johansen
84f1f78742 apparmor: export set of capabilities supported by the apparmor module
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2013-08-14 11:42:07 -07:00
John Johansen
29b3822f1e apparmor: add the profile introspection file to interface
Add the dynamic namespace relative profiles file to the interace, to allow
introspection of loaded profiles and their modes.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2013-08-14 11:42:07 -07:00
John Johansen
556d0be74b apparmor: add an optional profile attachment string for profiles
Add the ability to take in and report a human readable profile attachment
string for profiles so that attachment specifications can be easily
inspected.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2013-08-14 11:42:07 -07:00
John Johansen
0d259f043f apparmor: add interface files for profiles and namespaces
Add basic interface files to access namespace and profile information.
The interface files are created when a profile is loaded and removed
when the profile or namespace is removed.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-08-14 11:42:07 -07:00
John Johansen
038165070a apparmor: allow setting any profile into the unconfined state
Allow emulating the default profile behavior from boot, by allowing
loading of a profile in the unconfined state into a new NS.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2013-08-14 11:42:07 -07:00
John Johansen
8651e1d657 apparmor: make free_profile available outside of policy.c
Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-08-14 11:42:06 -07:00
John Johansen
742058b0f3 apparmor: rework namespace free path
namespaces now completely use the unconfined profile to track the
refcount and rcu freeing cycle. So rework the code to simplify (track
everything through the profile path right up to the end), and move the
rcu_head from policy base to profile as the namespace no longer needs
it.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2013-08-14 11:42:06 -07:00
John Johansen
fa2ac468db apparmor: update how unconfined is handled
ns->unconfined is being used read side without locking, nor rcu but is
being updated when a namespace is removed. This works for the root ns
which is never removed but has a race window and can cause failures when
children namespaces are removed.

Also ns and ns->unconfined have a circular refcounting dependency that
is problematic and must be broken. Currently this is done incorrectly
when the namespace is destroyed.

Fix this by forward referencing unconfined via the replacedby infrastructure
instead of directly updating the ns->unconfined pointer.

Remove the circular refcount dependency by making the ns and its unconfined
profile share the same refcount.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2013-08-14 11:42:06 -07:00
John Johansen
77b071b340 apparmor: change how profile replacement update is done
remove the use of replaced by chaining and move to profile invalidation
and lookup to handle task replacement.

Replacement chaining can result in large chains of profiles being pinned
in memory when one profile in the chain is use. With implicit labeling
this will be even more of a problem, so move to a direct lookup method.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-08-14 11:42:06 -07:00
John Johansen
01e2b670aa apparmor: convert profile lists to RCU based locking
Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-08-14 11:42:06 -07:00
John Johansen
dd51c84857 apparmor: provide base for multiple profiles to be replaced at once
previously profiles had to be loaded one at a time, which could result
in cases where a replacement of a set would partially succeed, and then fail
resulting in inconsistent policy.

Allow multiple profiles to replaced "atomically" so that the replacement
either succeeds or fails for the entire set of profiles.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-08-14 11:42:06 -07:00
John Johansen
9d910a3bc0 apparmor: add a features/policy dir to interface
Add a policy directory to features to contain features that can affect
policy compilation but do not affect mediation. Eg of such features would
be types of dfa compression supported, etc.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2013-08-14 11:42:05 -07:00
John Johansen
c611616cd3 apparmor: enable users to query whether apparmor is enabled
Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-08-14 11:42:05 -07:00
Tetsuo Handa
dfe4ac28be apparmor: remove minimum size check for vmalloc()
This is a follow-up to commit b5b3ee6c "apparmor: no need to delay vfree()".

Since vmalloc() will do "size = PAGE_ALIGN(size);",
we don't need to check for "size >= sizeof(struct work_struct)".

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-08-14 11:42:05 -07:00
Al Viro
b5b3ee6c9c apparmor: no need to delay vfree()
vfree() can be called from interrupt contexts now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-05-12 21:31:02 +10:00
John Johansen
2654bfbc2b apparmor: fix fully qualified name parsing
currently apparmor name parsing is only correctly handling
:<NS>:<profile>

but
:<NS>://<profile>

is also a valid form and what is exported to userspace.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-04-28 00:39:37 -07:00
John Johansen
3eea57c26e apparmor: fix setprocattr arg processing for onexec
the exec file isn't processing its command arg. It should only set be
responding to a command of exec.

Also cleanup setprocattr some more while we are at it.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-04-28 00:39:36 -07:00
John Johansen
214beacaa7 apparmor: localize getting the security context to a few macros
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
2013-04-28 00:39:35 -07:00
John Johansen
53fe8b9961 apparmor: fix sparse warnings
Fix a couple of warning reported by sparse

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-04-28 00:39:35 -07:00
John Johansen
41d1b3e868 apparmor: Fix smatch warning in aa_remove_profiles
smatch reports
  error: potential NULL dereference 'ns'.

this can not actually occur because it relies on aa_split_fqname setting
both ns_name and name as null but ns_name will actually always have a
value in this case.

so remove the unnecessary if (ns_name) conditional that is resulting
in the false positive further down.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2013-04-28 00:39:34 -07:00
John Johansen
b492d50bf5 apparmor: fix the audit type table
The audit type table is missing a comma so that KILLED comes out as
KILLEDAUTO.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:37:41 -07:00
John Johansen
ed686308c6 apparmor: reserve and mask off the top 8 bits of the base field
The top 8 bits of the base field have never been used, in fact can't
be used, by the current 'dfa16' format.  However they will be used in the
future as flags, so mask them off when using base as an index value.

Note: the use of the top 8 bits, without masking is trapped by the verify
      checks that base entries are within the size bounds.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2013-04-28 00:37:32 -07:00
John Johansen
4da05cc08d apparmor: move the free_profile fn ahead of aa_alloc_profile
Move the free_profile fn ahead of aa_alloc_profile so it can be used
in aa_alloc_profile without a forward declaration.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2013-04-28 00:37:24 -07:00
John Johansen
a4987857d2 apparmor: remove sid from profiles
The sid is not going to be a direct property of a profile anymore, instead
it will be directly related to the label, and the profile will pickup
a label back reference.

For null-profiles replace the use of sid with a per namespace unique
id.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2013-04-28 00:37:13 -07:00
John Johansen
180a6f5965 apparmor: move perm defines into policy_unpack
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:37:04 -07:00
John Johansen
8e4ff109d0 apparmor: misc cleanup of match
tidying up comments, includes and defines

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2013-04-28 00:36:55 -07:00
John Johansen
cf47aede3b apparmor: relax the restrictions on setting rlimits
Instead of limiting the setting of the processes limits to current,
relax this to tasks confined by the same profile, as the apparmor
controls for rlimits are at a profile level granularity.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:36:46 -07:00
John Johansen
4b7c331fc2 apparmor: remove "permipc" command
The "permipc" command is unused and unfinished, remove it.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2013-04-28 00:36:32 -07:00
John Johansen
7a2871b566 apparmor: use common fn to clear task_context for domain transitions
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:36:20 -07:00
John Johansen
0ca554b9fc apparmor: add kvzalloc to handle zeroing for kvmalloc
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:36:09 -07:00
John Johansen
3cfcc19e0b apparmor: add utility function to get an arbitrary tasks profile.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:35:53 -07:00
John Johansen
e573cc30bb apparmor: fix error code to failure message mapping for name lookup
-ESTALE used to be incorrectly used to indicate a disconnected path, when
name lookup failed.  This was fixed in commit e1b0e444 to correctly return
-EACCESS, but the error to failure message mapping was not correctly updated
to reflect this change.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:35:40 -07:00
John Johansen
50c5ecd5d8 apparmor: refactor profile mode macros
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:35:29 -07:00
John Johansen
04266236b1 apparmor: Remove -W1 warnings
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-By: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:35:18 -07:00
John Johansen
17322cc3f9 apparmor: fix auditing of domain transition failures due to incomplete policy
When policy specifies a transition to a profile that is not currently
loaded, it result in exec being denied.  However the failure is not being
audited correctly because the audit code is treating this as an allowed
permission and thus not reporting it.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-By: Steve Beattie <sbeattie@ubuntu.com>
2013-04-28 00:35:04 -07:00
Al Viro
496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
John Johansen
2e680dd61e apparmor: fix IRQ stack overflow during free_profile
BugLink: http://bugs.launchpad.net/bugs/1056078

Profile replacement can cause long chains of profiles to build up when
the profile being replaced is pinned. When the pinned profile is finally
freed, it puts the reference to its replacement, which may in turn nest
another call to free_profile on the stack. Because this may happen for
each profile in the replacedby chain this can result in a recusion that
causes the stack to overflow.

Break this nesting by directly walking the chain of replacedby profiles
(ie. use iteration instead of recursion to free the list). This results
in at most 2 levels of free_profile being called, while freeing a
replacedby chain.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-10-25 02:12:50 +11:00
John Johansen
43c422eda9 apparmor: fix apparmor OOPS in audit_log_untrustedstring+0x1c/0x40
The capability defines have moved causing the auto generated names
of capabilities that apparmor uses in logging to be incorrect.

Fix the autogenerated table source to uapi/linux/capability.h

Reported-by: YanHong <clouds.yan@gmail.com>
Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Analyzed-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-17 16:29:46 -07:00
David Howells
8a1ab3155c UAPI: (Scripted) Disintegrate include/asm-generic
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-04 18:20:15 +01:00
Linus Torvalds
437589a74b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...
2012-10-02 11:11:09 -07:00
Eric W. Biederman
d2b31ca644 userns: Teach security_path_chown to take kuids and kgids
Don't make the security modules deal with raw user space uid and
gids instead pass in a kuid_t and a kgid_t so that security modules
only have to deal with internal kernel uids and gids.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Morris <james.l.morris@oracle.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21 03:13:25 -07:00
Eric W. Biederman
2db8145293 userns: Convert apparmor to use kuid and kgid where appropriate
Cc: John Johansen <john.johansen@canonical.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21 03:13:21 -07:00
Paul Bolle
ec2e1ed2d7 AppArmor: remove af_names.h from .gitignore
Commit 4fdef2183e ("AppArmor: Cleanup make
file to remove cruft and make it easier to read") removed all traces of
af_names.h from the tree. Remove its entry in AppArmor's .gitignore file
too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 08:35:34 -07:00
Al Viro
e5467859f7 split ->file_mmap() into ->mmap_addr()/->mmap_file()
... i.e. file-dependent and address-dependent checks.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-31 13:11:54 -04:00
Al Viro
d007794a18 split cap_mmap_addr() out of cap_file_mmap()
... switch callers.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-31 13:10:54 -04:00
James Morris
ff2bb047c4 Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into next
Per pull request, for 3.5.
2012-05-22 11:21:06 +10:00
John Johansen
cffee16e8b apparmor: fix long path failure due to disconnected path
BugLink: http://bugs.launchpad.net/bugs/955892

All failures from __d_path where being treated as disconnected paths,
however __d_path can also fail when the generated pathname is too long.

The initial ENAMETOOLONG error was being lost, and ENAMETOOLONG was only
returned if the subsequent dentry_path call resulted in that error.  Other
wise if the path was split across a mount point such that the dentry_path
fit within the buffer when the __d_path did not the failure was treated
as a disconnected path.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-05-18 11:09:52 -07:00
John Johansen
bf83208e0b apparmor: fix profile lookup for unconfined
BugLink: http://bugs.launchpad.net/bugs/978038

also affects apparmor portion of
BugLink: http://bugs.launchpad.net/bugs/987371

The unconfined profile is not stored in the regular profile list, but
change_profile and exec transitions may want access to it when setting
up specialized transitions like switch to the unconfined profile of a
new policy namespace.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-05-18 11:09:28 -07:00
John Johansen
c29bceb396 Fix execve behavior apparmor for PR_{GET,SET}_NO_NEW_PRIVS
Add support for AppArmor to explicitly fail requested domain transitions
if NO_NEW_PRIVS is set and the task is not unconfined.

Transitions from unconfined are still allowed because this always results
in a reduction of privileges.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>

v18: new acked-by, new description
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-14 11:13:18 +10:00
Andy Lutomirski
259e5e6c75 Add PR_{GET,SET}_NO_NEW_PRIVS to prevent execve from granting privs
With this change, calling
  prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0)
disables privilege granting operations at execve-time.  For example, a
process will not be able to execute a setuid binary to change their uid
or gid if this bit is set.  The same is true for file capabilities.

Additionally, LSM_UNSAFE_NO_NEW_PRIVS is defined to ensure that
LSMs respect the requested behavior.

To determine if the NO_NEW_PRIVS bit is set, a task may call
  prctl(PR_GET_NO_NEW_PRIVS, 0, 0, 0, 0);
It returns 1 if set and 0 if it is not set. If any of the arguments are
non-zero, it will return -1 and set errno to -EINVAL.
(PR_SET_NO_NEW_PRIVS behaves similarly.)

This functionality is desired for the proposed seccomp filter patch
series.  By using PR_SET_NO_NEW_PRIVS, it allows a task to modify the
system call behavior for itself and its child tasks without being
able to impact the behavior of a more privileged task.

Another potential use is making certain privileged operations
unprivileged.  For example, chroot may be considered "safe" if it cannot
affect privileged tasks.

Note, this patch causes execve to fail when PR_SET_NO_NEW_PRIVS is
set and AppArmor is in use.  It is fixed in a subsequent patch.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Will Drewry <wad@chromium.org>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>

v18: updated change desc
v17: using new define values as per 3.4
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-14 11:13:18 +10:00
Eric Paris
50c205f5e5 LSM: do not initialize common_audit_data to 0
It isn't needed.  If you don't set the type of the data associated with
that type it is a pretty obvious programming bug.  So why waste the cycles?

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:04 -04:00
Eric Paris
0972c74ecb apparmor: move task from common_audit_data to apparmor_audit_data
apparmor is the only LSM that uses the common_audit_data tsk field.
Instead of making all LSMs pay for the stack space move the aa usage into
the apparmor_audit_data.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:02 -04:00
Eric Paris
bd5e50f9c1 LSM: remove the COMMON_AUDIT_DATA_INIT type expansion
Just open code it so grep on the source code works better.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:23:01 -04:00
Eric Paris
83d498569e SELinux: rename dentry_open to file_open
dentry_open takes a file, rename it to file_open

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-04-09 12:22:50 -04:00
Linus Torvalds
b61c37f579 lsm_audit: don't specify the audit pre/post callbacks in 'struct common_audit_data'
It just bloats the audit data structure for no good reason, since the
only time those fields are filled are just before calling the
common_lsm_audit() function, which is also the only user of those
fields.

So just make them be the arguments to common_lsm_audit(), rather than
bloating that structure that is passed around everywhere, and is
initialized in hot paths.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-03 09:49:59 -07:00
Eric Paris
3b3b0e4fc1 LSM: shrink sizeof LSM specific portion of common_audit_data
Linus found that the gigantic size of the common audit data caused a big
perf hit on something as simple as running stat() in a loop.  This patch
requires LSMs to declare the LSM specific portion separately rather than
doing it in a union.  Thus each LSM can be responsible for shrinking their
portion and don't have to pay a penalty just because other LSMs have a
bigger space requirement.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-03 09:48:40 -07:00
John Johansen
0421ea91dd apparmor: Fix change_onexec when called from a confined task
Fix failure in aa_change_onexec api when the request is made from a confined
task.  This failure was caused by two problems

 The AA_MAY_ONEXEC perm was not being mapped correctly for this case.

 The executable name was being checked as second time instead of using the
 requested onexec profile name, which may not be the same as the exec
 profile name. This mistake can not be exploited to grant extra permission
 because of the above flaw where the ONEXEC permission was not being mapped
 so it will not be granted.

BugLink: http://bugs.launchpad.net/bugs/963756

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-03-28 01:00:05 +11:00
Tetsuo Handa
7e570145cb AppArmor: Fix location of const qualifier on generated string tables
Signed-off-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-03-19 18:22:46 -07:00
Jan Engelhardt
2d4cee7e3a AppArmor: add const qualifiers to string arrays
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-03-14 19:09:13 -07:00
John Johansen
ad5ff3db53 AppArmor: Add ability to load extended policy
Add the base support for the new policy extensions. This does not bring
any additional functionality, or change current semantics.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-03-14 19:09:03 -07:00
John Johansen
57fa1e1809 AppArmor: Move path failure information into aa_get_name and rename
Move the path name lookup failure messages into the main path name lookup
routine, as the information is useful in more than just aa_path_perm.

Also rename aa_get_name to aa_path_name as it is not getting a reference
counted object with a corresponding put fn.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-03-14 06:15:25 -07:00
John Johansen
0fe1212d05 AppArmor: Update dfa matching routines.
Update aa_dfa_match so that it doesn't result in an input string being
walked twice (once to get its length and another time to match)

Add a single step functions
  aa_dfa_next

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-03-14 06:15:24 -07:00
John Johansen
3372b68a3c AppArmor: Minor cleanup of d_namespace_path to consolidate error handling
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-03-14 06:15:23 -07:00
John Johansen
fbba8d89ac AppArmor: Retrieve the dentry_path for error reporting when path lookup fails
When __d_path and d_absolute_path fail due to the name being outside of
the current namespace no name is reported.  Use dentry_path to provide
some hint as to which file was being accessed.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-03-14 06:15:22 -07:00
John Johansen
33e521acff AppArmor: Add const qualifiers to generated string tables
Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-03-14 06:15:12 -07:00
John Johansen
b1b4bc2ed9 AppArmor: Fix oops in policy unpack auditing
Post unpacking of policy a verification pass is made on x transition
indexes.  When this fails a call to audit_iface is made resulting in an
oops, because audit_iface is expecting a valid buffer position but
since the failure comes from post unpack verification there is none.

Make the position argument optional so that audit_iface can be called
from post unpack verification.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-03-14 06:15:02 -07:00
John Johansen
ef9a762279 AppArmor: Fix error returned when a path lookup is disconnected
The returning of -ESATLE when a path lookup fails as disconnected is wrong.
Since AppArmor is rejecting the access return -EACCES instead.

This also fixes a bug in complain (learning) mode where disconnected paths
are denied because -ESTALE errors are not ignored causing failures that
can change application behavior.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-03-14 06:14:52 -07:00
John Johansen
28042fabf4 AppArmor: Fix the error case for chroot relative path name lookup
When a chroot relative pathname lookup fails it is falling through to
do a d_absolute_path lookup.  This is incorrect as d_absolute_path should
only be used to lookup names for namespace absolute paths.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-02-27 11:38:23 -08:00
John Johansen
38305a4bab AppArmor: fix mapping of META_READ to audit and quiet flags
The mapping of AA_MAY_META_READ for the allow mask was also being mapped
to the audit and quiet masks. This would result in some operations being
audited when the should not.

This flaw was hidden by the previous audit bug which would drop some
messages that where supposed to be audited.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-02-27 11:38:22 -08:00
John Johansen
8b964eae20 AppArmor: Fix underflow in xindex calculation
If the xindex value stored in the accept tables is 0, the extraction of
that value will result in an underflow (0 - 4).

In properly compiled policy this should not happen for file rules but
it may be possible for other rule types in the future.

To exploit this underflow a user would have to be able to load a corrupt
policy, which requires CAP_MAC_ADMIN, overwrite system policy in kernel
memory or know of a compiler error resulting in the flaw being present
for loaded policy (no such flaw is known at this time).

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-02-27 11:38:21 -08:00
John Johansen
ade3ddc01e AppArmor: Fix dropping of allowed operations that are force audited
The audit permission flag, that specifies an audit message should be
provided when an operation is allowed, was being ignored in some cases.

This is because the auto audit mode (which determines the audit mode from
system flags) was incorrectly assigned the same value as audit mode. The
shared value would result in messages that should be audited going through
a second evaluation as to whether they should be audited based on the
auto audit, resulting in some messages being dropped.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-02-27 11:38:21 -08:00
John Johansen
cdbd2884df AppArmor: Add mising end of structure test to caps unpacking
The unpacking of struct capsx is missing a check for the end of the
caps structure.  This can lead to unpack failures depending on what else
is packed into the policy file being unpacked.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
2012-02-27 11:38:20 -08:00
Kees Cook
d384b0a1a3 AppArmor: export known rlimit names/value mappings in securityfs
Since the parser needs to know which rlimits are known to the kernel,
export the list via a mask file in the "rlimit" subdirectory in the
securityfs "features" directory.

Signed-off-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-02-27 11:38:19 -08:00
Kees Cook
a9bf8e9fd5 AppArmor: add "file" details to securityfs
Create the "file" directory in the securityfs for tracking features
related to files.

Signed-off-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-02-27 11:38:18 -08:00
Kees Cook
e74abcf335 AppArmor: add initial "features" directory to securityfs
This adds the "features" subdirectory to the AppArmor securityfs
to display boolean features flags and the known capability mask.

Signed-off-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-02-27 11:38:17 -08:00
Kees Cook
9acd494be9 AppArmor: refactor securityfs to use structures
Use a file tree structure to represent the AppArmor securityfs.

Signed-off-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-02-27 11:38:09 -08:00
Linus Torvalds
c49c41a413 Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security:
  capabilities: remove __cap_full_set definition
  security: remove the security_netlink_recv hook as it is equivalent to capable()
  ptrace: do not audit capability check when outputing /proc/pid/stat
  capabilities: remove task_ns_* functions
  capabitlies: ns_capable can use the cap helpers rather than lsm call
  capabilities: style only - move capable below ns_capable
  capabilites: introduce new has_ns_capabilities_noaudit
  capabilities: call has_ns_capability from has_capability
  capabilities: remove all _real_ interfaces
  capabilities: introduce security_capable_noaudit
  capabilities: reverse arguments to security_capable
  capabilities: remove the task from capable LSM hook entirely
  selinux: sparse fix: fix several warnings in the security server cod
  selinux: sparse fix: fix warnings in netlink code
  selinux: sparse fix: eliminate warnings for selinuxfs
  selinux: sparse fix: declare selinux_disable() in security.h
  selinux: sparse fix: move selinux_complete_init
  selinux: sparse fix: make selinux_secmark_refcount static
  SELinux: Fix RCU deref check warning in sel_netport_insert()

Manually fix up a semantic mis-merge wrt security_netlink_recv():

 - the interface was removed in commit fd77846152 ("security: remove
   the security_netlink_recv hook as it is equivalent to capable()")

 - a new user of it appeared in commit a38f7907b9 ("crypto: Add
   userspace configuration API")

causing no automatic merge conflict, but Eric Paris pointed out the
issue.
2012-01-14 18:36:33 -08:00
Rusty Russell
90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds
e7691a1ce3 Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: (32 commits)
  ima: fix invalid memory reference
  ima: free duplicate measurement memory
  security: update security_file_mmap() docs
  selinux: Casting (void *) value returned by kmalloc is useless
  apparmor: fix module parameter handling
  Security: tomoyo: add .gitignore file
  tomoyo: add missing rcu_dereference()
  apparmor: add missing rcu_dereference()
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mpi/mpi-mpow: NULL dereference on allocation failure
  digsig: build dependency fix
  KEYS: Give key types their own lockdep class for key->sem
  TPM: fix transmit_cmd error logic
  TPM: NSC and TIS drivers X86 dependency fix
  TPM: Export wait_for_stat for other vendor specific drivers
  TPM: Use vendor specific function for status probe
  tpm_tis: add delay after aborting command
  tpm_tis: Check return code from getting timeouts/durations
  tpm: Introduce function to poll for result of self test
  ...

Fix up trivial conflict in lib/Makefile due to addition of CONFIG_MPI
and SIGSIG next to CONFIG_DQL addition.
2012-01-10 21:51:23 -08:00
James Morris
8fcc995495 Merge branch 'next' into for-linus
Conflicts:
	security/integrity/evm/evm_crypto.c

Resolved upstream fix vs. next conflict manually.

Signed-off-by: James Morris <jmorris@namei.org>
2012-01-09 12:16:48 +11:00
Al Viro
cdcf116d44 switch security_path_chmod() to struct path *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06 23:16:53 -05:00
Eric Paris
6a9de49115 capabilities: remove the task from capable LSM hook entirely
The capabilities framework is based around credentials, not necessarily the
current task.  Yet we still passed the current task down into LSMs from the
security_capable() LSM hook as if it was a meaningful portion of the security
decision.  This patch removes the 'generic' passing of current and instead
forces individual LSMs to use current explicitly if they think it is
appropriate.  In our case those LSMs are SELinux and AppArmor.

I believe the AppArmor use of current is incorrect, but that is wholely
unrelated to this patch.  This patch does not change what AppArmor does, it
just makes it clear in the AppArmor code that it is doing it.

The SELinux code still uses current in it's audit message, which may also be
wrong and needs further investigation.  Again this is NOT a change, it may
have always been wrong, this patch just makes it clear what is happening.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:53 -05:00
Al Viro
04fc66e789 switch ->path_mknod() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:19 -05:00
Al Viro
4572befe24 switch ->path_mkdir() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:18 -05:00
Al Viro
52ef0c042b switch securityfs_create_file() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:13 -05:00
Al Viro
910f4ecef3 switch security_path_chmod() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:13 -05:00
Al Viro
e407699ef5 btrfs, nfs, apparmor: don't pull mnt_namespace.h for no reason...
it's not needed anymore; we used to, back when we had to do
mount_subtree() by hand, complete with put_mnt_ns() in it.
No more...  Apparmor didn't need it since the __d_path() fix.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:38 -05:00
Rusty Russell
b8aa09fd88 apparmor: fix module parameter handling
The 'aabool' wrappers actually pass off to the 'bool' parse functions,
so you should use the same check function.  Similarly for aauint and
uint.

(Note that 'bool' module parameters also allow 'int', which is why you
got away with this, but that's changing very soon.)

Cc: linux-security-module@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-12-16 12:45:24 +11:00
Kees Cook
2053c4727c apparmor: add missing rcu_dereference()
Adds a missed rcu_dereference() around real_parent.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-12-09 12:08:41 +11:00
Al Viro
02125a8264 fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API
__d_path() API is asking for trouble and in case of apparmor d_namespace_path()
getting just that.  The root cause is that when __d_path() misses the root
it had been told to look for, it stores the location of the most remote ancestor
in *root.  Without grabbing references.  Sure, at the moment of call it had
been pinned down by what we have in *path.  And if we raced with umount -l, we
could have very well stopped at vfsmount/dentry that got freed as soon as
prepend_path() dropped vfsmount_lock.

It is safe to compare these pointers with pre-existing (and known to be still
alive) vfsmount and dentry, as long as all we are asking is "is it the same
address?".  Dereferencing is not safe and apparmor ended up stepping into
that.  d_namespace_path() really wants to examine the place where we stopped,
even if it's not connected to our namespace.  As the result, it looked
at ->d_sb->s_magic of a dentry that might've been already freed by that point.
All other callers had been careful enough to avoid that, but it's really
a bad interface - it invites that kind of trouble.

The fix is fairly straightforward, even though it's bigger than I'd like:
	* prepend_path() root argument becomes const.
	* __d_path() is never called with NULL/NULL root.  It was a kludge
to start with.  Instead, we have an explicit function - d_absolute_root().
Same as __d_path(), except that it doesn't get root passed and stops where
it stops.  apparmor and tomoyo are using it.
	* __d_path() returns NULL on path outside of root.  The main
caller is show_mountinfo() and that's precisely what we pass root for - to
skip those outside chroot jail.  Those who don't want that can (and do)
use d_path().
	* __d_path() root argument becomes const.  Everyone agrees, I hope.
	* apparmor does *NOT* try to use __d_path() or any of its variants
when it sees that path->mnt is an internal vfsmount.  In that case it's
definitely not mounted anywhere and dentry_path() is exactly what we want
there.  Handling of sysctl()-triggered weirdness is moved to that place.
	* if apparmor is asked to do pathname relative to chroot jail
and __d_path() tells it we it's not in that jail, the sucker just calls
d_absolute_path() instead.  That's the other remaining caller of __d_path(),
BTW.
        * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway -
the normal seq_file logics will take care of growing the buffer and redoing
the call of ->show() just fine).  However, if it gets path not reachable
from root, it returns SEQ_SKIP.  The only caller adjusted (i.e. stopped
ignoring the return value as it used to do).

Reviewed-by: John Johansen <john.johansen@canonical.com>
ACKed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
2011-12-06 23:57:18 -05:00
James Morris
cc7db09952 apparmor: sparse fix: include procattr.h in procattr.c
Fix sparse warnings:
security/apparmor/procattr.c:35:5: warning: symbol 'aa_getprocattr' was not declared. Should it be static?
security/apparmor/procattr.c:113:5: warning: symbol 'aa_setprocattr_changehat' was not declared. Should it be static?
security/apparmor/procattr.c:158:5: warning: symbol 'aa_setprocattr_changeprofile' was not declared. Should it be static?
security/apparmor/procattr.c:166:5: warning: symbol 'aa_setprocattr_permipc' was not declared. Should it be static?

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: John Johansen <john.johansen@canonical.com>
2011-09-09 16:56:29 -07:00
James Morris
7ee95850ba apparmor: sparse fix: rename shadowed variables in policy_unpack.c
Fix the following warnings:

security/apparmor/policy_unpack.c:384:35: warning: symbol 'size' shadows an earlier one
security/apparmor/policy_unpack.c:370:24: originally declared here
security/apparmor/policy_unpack.c:443:29: warning: symbol 'tmp' shadows an earlier one
security/apparmor/policy_unpack.c:434:21: originally declared here

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: John Johansen <john.johansen@canonical.com>
2011-09-09 16:56:28 -07:00
James Morris
32c3df631b apparmor: sparse fix: add apparmor.h to lib.c
Fix the following sparse warnings:
security/apparmor/lib.c:37:6: warning: symbol 'aa_split_fqname' was not declared. Should it be static?
security/apparmor/lib.c:63:6: warning: symbol 'aa_info_message' was not declared. Should it be static?
security/apparmor/lib.c:83:6: warning: symbol 'kvmalloc' was not declared. Should it be static?
security/apparmor/lib.c:123:6: warning: symbol 'kvfree' was not declared. Should it be static?

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:28 -07:00
James Morris
33f8bf5880 apparmor: sparse fix: include ipc.h
Include ipc.h to eliminate sparse warnings.

security/apparmor/ipc.c:61:5: warning: symbol 'aa_may_ptrace' was not declared. Should it be static?
security/apparmor/ipc.c:83:5: warning: symbol 'aa_ptrace' was not declared. Should it be static

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: John Johansen <john.johansen@canonical.com>
2011-09-09 16:56:27 -07:00
James Morris
3417d8d5d4 apparmor: sparse fix: make aa_create_aafs static
Sparse fix: make aa_create_aafs static.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: John Johansen <john.johansen@canonical.com>
2011-09-09 16:56:25 -07:00
Linus Torvalds
95b6886526 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)
  tpm_nsc: Fix bug when loading multiple TPM drivers
  tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block
  tpm: Fix compilation warning when CONFIG_PNP is not defined
  TOMOYO: Update kernel-doc.
  tpm: Fix a typo
  tpm_tis: Probing function for Intel iTPM bug
  tpm_tis: Fix the probing for interrupts
  tpm_tis: Delay ACPI S3 suspend while the TPM is busy
  tpm_tis: Re-enable interrupts upon (S3) resume
  tpm: Fix display of data in pubek sysfs entry
  tpm_tis: Add timeouts sysfs entry
  tpm: Adjust interface timeouts if they are too small
  tpm: Use interface timeouts returned from the TPM
  tpm_tis: Introduce durations sysfs entry
  tpm: Adjust the durations if they are too small
  tpm: Use durations returned from TPM
  TOMOYO: Enable conditional ACL.
  TOMOYO: Allow using argv[]/envp[] of execve() as conditions.
  TOMOYO: Allow using executable's realpath and symlink's target as conditions.
  TOMOYO: Allow using owner/group etc. of file objects as conditions.
  ...

Fix up trivial conflict in security/tomoyo/realpath.c
2011-07-27 19:26:38 -07:00
Linus Torvalds
8209f53d79 Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
  ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
  ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
  connector: add an event for monitoring process tracers
  ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
  ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
  ptrace_init_task: initialize child->jobctl explicitly
  has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
  ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
  ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
  ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
  ptrace: ptrace_reparented() should check same_thread_group()
  redefine thread_group_leader() as exit_signal >= 0
  do not change dead_task->exit_signal
  kill task_detached()
  reparent_leader: check EXIT_DEAD instead of task_detached()
  make do_notify_parent() __must_check, update the callers
  __ptrace_detach: avoid task_detached(), check do_notify_parent()
  kill tracehook_notify_death()
  make do_notify_parent() return bool
  ptrace: s/tracehook_tracer_task()/ptrace_parent()/
  ...
2011-07-22 15:06:50 -07:00
John Johansen
25e75dff51 AppArmor: Fix masking of capabilities in complain mode
AppArmor is masking the capabilities returned by capget against the
capabilities mask in the profile.  This is wrong, in complain mode the
profile has effectively all capabilities, as the profile restrictions are
not being enforced, merely tested against to determine if an access is
known by the profile.

This can result in the wrong behavior of security conscience applications
like sshd which examine their capability set, and change their behavior
accordingly.  In this case because of the masked capability set being
returned sshd fails due to DAC checks, even when the profile is in complain
mode.

Kernels affected: 2.6.36 - 3.0.

Signed-off-by: John Johansen <john.johansen@canonical.com>
2011-06-29 02:04:44 +01:00
John Johansen
04fdc099f9 AppArmor: Fix reference to rcu protected pointer outside of rcu_read_lock
The pointer returned from tracehook_tracer_task() is only valid inside
the rcu_read_lock.  However the tracer pointer obtained is being passed
to aa_may_ptrace outside of the rcu_read_lock critical section.

Mover the aa_may_ptrace test into the rcu_read_lock critical section, to
fix this.

Kernels affected: 2.6.36 - 3.0

Reported-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: John Johansen <john.johansen@canonical.com>
2011-06-29 02:02:03 +01:00
Tejun Heo
06d984737b ptrace: s/tracehook_tracer_task()/ptrace_parent()/
tracehook.h is on the way out.  Rename tracehook_tracer_task() to
ptrace_parent() and move it from tracehook.h to ptrace.h.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:29 +02:00
Alexey Dobriyan
b7f080cfe2 net: remove mm.h inclusion from netdevice.h
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually).

To prevent mm.h inclusion via other channels also extract "enum dma_data_direction"
definition into separate header. This tiny piece is what gluing netdevice.h with mm.h
via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h".
Removal of mm.h from scatterlist.h was tried and was found not feasible
on most archs, so the link was cutoff earlier.

Hope people are OK with tiny include file.

Note, that mm_types.h is still dragged in, but it is a separate story.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21 19:17:20 -07:00
John Johansen
1780f2d383 AppArmor: Fix sleep in invalid context from task_setrlimit
Affected kernels 2.6.36 - 3.0

AppArmor may do a GFP_KERNEL memory allocation with task_lock(tsk->group_leader);
held when called from security_task_setrlimit.  This will only occur when the
task's current policy has been replaced, and the task's creds have not been
updated before entering the LSM security_task_setrlimit() hook.

BUG: sleeping function called from invalid context at mm/slub.c:847
 in_atomic(): 1, irqs_disabled(): 0, pid: 1583, name: cupsd
 2 locks held by cupsd/1583:
  #0:  (tasklist_lock){.+.+.+}, at: [<ffffffff8104dafa>] do_prlimit+0x61/0x189
  #1:  (&(&p->alloc_lock)->rlock){+.+.+.}, at: [<ffffffff8104db2d>]
do_prlimit+0x94/0x189
 Pid: 1583, comm: cupsd Not tainted 3.0.0-rc2-git1 #7
 Call Trace:
  [<ffffffff8102ebf2>] __might_sleep+0x10d/0x112
  [<ffffffff810e6f46>] slab_pre_alloc_hook.isra.49+0x2d/0x33
  [<ffffffff810e7bc4>] kmem_cache_alloc+0x22/0x132
  [<ffffffff8105b6e6>] prepare_creds+0x35/0xe4
  [<ffffffff811c0675>] aa_replace_current_profile+0x35/0xb2
  [<ffffffff811c4d2d>] aa_current_profile+0x45/0x4c
  [<ffffffff811c4d4d>] apparmor_task_setrlimit+0x19/0x3a
  [<ffffffff811beaa5>] security_task_setrlimit+0x11/0x13
  [<ffffffff8104db6b>] do_prlimit+0xd2/0x189
  [<ffffffff8104dea9>] sys_setrlimit+0x3b/0x48
  [<ffffffff814062bb>] system_call_fastpath+0x16/0x1b

Signed-off-by: John Johansen <john.johansen@canonical.com>
Reported-by: Miles Lane <miles.lane@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2011-06-09 11:46:53 +10:00
Kees Cook
a5b2c5b2ad AppArmor: fix oops in apparmor_setprocattr
When invalid parameters are passed to apparmor_setprocattr a NULL deref
oops occurs when it tries to record an audit message. This is because
it is passing NULL for the profile parameter for aa_audit. But aa_audit
now requires that the profile passed is not NULL.

Fix this by passing the current profile on the task that is trying to
setprocattr.

Signed-off-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Cc: stable@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2011-06-01 13:07:03 +10:00
Randy Dunlap
d410fa4ef9 Create Documentation/security/,
move LSM-, credentials-, and keys-related files from Documentation/
  to Documentation/security/,
add Documentation/security/00-INDEX, and
update all occurrences of Documentation/<moved_file>
  to Documentation/security/<moved_file>.
2011-05-19 15:59:38 -07:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Serge E. Hallyn
3486740a4f userns: security: make capabilities relative to the user namespace
- Introduce ns_capable to test for a capability in a non-default
  user namespace.
- Teach cap_capable to handle capabilities in a non-default
  user namespace.

The motivation is to get to the unprivileged creation of new
namespaces.  It looks like this gets us 90% of the way there, with
only potential uid confusion issues left.

I still need to handle getting all caps after creation but otherwise I
think I have a good starter patch that achieves all of your goals.

Changelog:
	11/05/2010: [serge] add apparmor
	12/14/2010: [serge] fix capabilities to created user namespaces
	Without this, if user serge creates a user_ns, he won't have
	capabilities to the user_ns he created.  THis is because we
	were first checking whether his effective caps had the caps
	he needed and returning -EPERM if not, and THEN checking whether
	he was the creator.  Reverse those checks.
	12/16/2010: [serge] security_real_capable needs ns argument in !security case
	01/11/2011: [serge] add task_ns_capable helper
	01/11/2011: [serge] add nsown_capable() helper per Bastian Blank suggestion
	02/16/2011: [serge] fix a logic bug: the root user is always creator of
		    init_user_ns, but should not always have capabilities to
		    it!  Fix the check in cap_capable().
	02/21/2011: Add the required user_ns parameter to security_capable,
		    fixing a compile failure.
	02/23/2011: Convert some macros to functions as per akpm comments.  Some
		    couldn't be converted because we can't easily forward-declare
		    them (they are inline if !SECURITY, extern if SECURITY).  Add
		    a current_user_ns function so we can use it in capability.h
		    without #including cred.h.  Move all forward declarations
		    together to the top of the #ifdef __KERNEL__ section, and use
		    kernel-doc format.
	02/23/2011: Per dhowells, clean up comment in cap_capable().
	02/23/2011: Per akpm, remove unreachable 'return -EPERM' in cap_capable.

(Original written and signed off by Eric;  latest, modified version
acked by him)

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: export current_user_ns() for ecryptfs]
[serge.hallyn@canonical.com: remove unneeded extra argument in selinux's task_has_capability]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:02 -07:00
James Morris
c151694b2c Merge branch 'security-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev into next 2011-03-09 14:12:07 +11:00
Shan Wei
1936113c82 AppArmor: kill unused macros in lsm.c
Remove unused macros.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2011-03-08 17:04:07 -08:00
Michal Hocko
0f82502656 AppArmor: cleanup generated files correctly
clean-files should be defined as a variable not a target.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2011-03-08 17:03:53 -08:00
John Johansen
4fdef2183e AppArmor: Cleanup make file to remove cruft and make it easier to read
Cleanups based on comments from Sam Ravnborg,

* remove references to the currently unused af_names.h
* add rlim_names.h to clean-files:
* rework cmd_make-XXX to make them more readable by adding comments,
  reworking the expressions to put logical components on individual lines,
  and keep lines < 80 characters.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-03-05 02:46:26 -08:00
Linus Torvalds
008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Alexey Dobriyan
57cc7215b7 headers: kobject.h redux
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10 08:51:44 -08:00
Alexey Dobriyan
37721e1b0c headers: path.h redux
Remove path.h from sched.h and other files.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10 08:51:44 -08:00
Jiri Kosina
4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
wzt.wzt@gmail.com
a26d279ea8 APPARMOR: Fix memory leak of apparmor_init()
set_init_cxt() allocted sizeof(struct aa_task_cxt) bytes for cxt,
if register_security() failed, it will cause memory leak.

Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-11-11 07:36:22 +11:00
wzt.wzt@gmail.com
246c3fb16b APPARMOR: Fix memory leak of alloc_namespace()
policy->name is a substring of policy->hname, if prefix is not NULL, it will
allocted strlen(prefix) + strlen(name) + 3 bytes to policy->hname in policy_init().
use kzfree(ns->base.name) will casue memory leak if alloc_namespace() failed.

Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-11-11 07:36:18 +11:00
Uwe Kleine-König
b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Christoph Hellwig
be148247cf fs: take dcache_lock inside __d_path
All callers take dcache_lock just around the call to __d_path, so
take the lock into it in preparation of getting rid of dcache_lock.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:12 -04:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
John Johansen
3ed02ada2a AppArmor: Ensure the size of the copy is < the buffer allocated to hold it
Actually I think in this case the appropriate thing to do is to BUG as there
is currently a case (remove) where the alloc_size needs to be larger than
the copy_size, and if copy_size is ever greater than alloc_size there is
a mistake in the caller code.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:46 +11:00
Yong Zhang
4b04a7cfc5 .gitignore: ignore apparmor/rlim_names.h
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:35 +11:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
John Johansen
999b4f0aa2 AppArmor: Fix locking from removal of profile namespace
The locking for profile namespace removal is wrong, when removing a
profile namespace, it needs to be removed from its parent's list.
Lock the parent of namespace list instead of the namespace being removed.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-09-08 09:19:34 +10:00
John Johansen
04ccd53f09 AppArmor: Fix splitting an fqname into separate namespace and profile names
As per Dan Carpenter <error27@gmail.com>
  If we have a ns name without a following profile then in the original
  code it did "*ns_name = &name[1];".  "name" is NULL so "*ns_name" is
  0x1.  That isn't useful and could cause an oops when this function is
  called from aa_remove_profiles().

Beyond this the assignment of the namespace name was wrong in the case
where the profile name was provided as it was being set to &name[1]
after name  = skip_spaces(split + 1);

Move the ns_name assignment before updating name for the split and
also add skip_spaces, making the interface more robust.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-09-08 09:19:31 +10:00
John Johansen
3a2dc8382a AppArmor: Fix security_task_setrlimit logic for 2.6.36 changes
2.6.36 introduced the abilitiy to specify the task that is having its
rlimits set.  Update mediation to ensure that confined tasks can only
set their own group_leader as expected by current policy.

Add TODO note about extending policy to support setting other tasks
rlimits.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-09-08 09:19:29 +10:00
John Johansen
e819ff519b AppArmor: Drop hack to remove appended " (deleted)" string
The 2.6.36 kernel has refactored __d_path() so that it no longer appends
" (deleted)" to unlinked paths.  So drop the hack that was used to detect
and remove the appended string.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-09-08 09:19:24 +10:00
Linus Torvalds
145c3ae46b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs: brlock vfsmount_lock
  fs: scale files_lock
  lglock: introduce special lglock and brlock spin locks
  tty: fix fu_list abuse
  fs: cleanup files_lock locking
  fs: remove extra lookup in __lookup_hash
  fs: fs_struct rwlock to spinlock
  apparmor: use task path helpers
  fs: dentry allocation consolidation
  fs: fix do_lookup false negative
  mbcache: Limit the maximum number of cache entries
  hostfs ->follow_link() braino
  hostfs: dumb (and usually harmless) tpyo - strncpy instead of strlcpy
  remove SWRITE* I/O types
  kill BH_Ordered flag
  vfs: update ctime when changing the file's permission by setfacl
  cramfs: only unlock new inodes
  fix reiserfs_evict_inode end_writeback second call
2010-08-18 09:35:08 -07:00
Nick Piggin
44672e4fbd apparmor: use task path helpers
apparmor: use task path helpers

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 08:35:46 -04:00
Jiri Slaby
7cb4dc9fc9 AppArmor: fix task_setrlimit prototype
After rlimits tree was merged we get the following errors:
security/apparmor/lsm.c:663:2: warning: initialization from incompatible pointer type

It is because AppArmor was merged in the meantime, but uses the old
prototype. So fix it by adding struct task_struct as a first parameter
of apparmor_task_setrlimit.

NOTE that this is ONLY a compilation warning fix (and crashes caused
by that). It needs proper handling in AppArmor depending on who is the
'task'.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-17 08:06:09 +10:00
Stephen Rothwell
101d6c826f AppArmor: update for module_param_named API change
Fixes these build errors:
security/apparmor/lsm.c:701: error: 'param_ops_aabool' undeclared here (not in a function)
security/apparmor/lsm.c:721: error: 'param_ops_aalockpolicy' undeclared here (not in a function)
security/apparmor/lsm.c:729: error: 'param_ops_aauint' undeclared here (not in a function)

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-08-11 23:04:14 +09:30
Randy Dunlap
06c22dadc6 apparmor: depends on NET
SECURITY_APPARMOR should depend on NET since AUDIT needs
(depends on) NET.

Fixes 70-80 errors that occur when CONFIG_NET is not enabled,
but APPARMOR selects AUDIT without qualification.  E.g.:

audit.c:(.text+0x33361): undefined reference to `netlink_unicast'
(.text+0x333df): undefined reference to `netlink_unicast'
audit.c:(.text+0x3341d): undefined reference to `skb_queue_tail'
audit.c:(.text+0x33424): undefined reference to `kfree_skb'
audit.c:(.text+0x334cb): undefined reference to `kfree_skb'
audit.c:(.text+0x33597): undefined reference to `skb_put'
audit.c:(.text+0x3369b): undefined reference to `__alloc_skb'
audit.c:(.text+0x336d7): undefined reference to `kfree_skb'
(.text+0x3374c): undefined reference to `__alloc_skb'
auditfilter.c:(.text+0x35305): undefined reference to `skb_queue_tail'
lsm_audit.c:(.text+0x2873): undefined reference to `init_net'
lsm_audit.c:(.text+0x2878): undefined reference to `dev_get_by_index'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-05 07:36:51 -04:00
James Morris
77c80e6b2f AppArmor: fix build warnings for non-const use of get_task_cred
Fix build warnings for non-const use of get_task_cred.

Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:49:00 +10:00
John Johansen
016d825fe0 AppArmor: Enable configuring and building of the AppArmor security module
Kconfig and Makefiles to enable configuration and building of AppArmor.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:39 +10:00
James Morris
4d6ec10bb4 AppArmor: update path_truncate method to latest version
Remove extraneous path_truncate arguments from the AppArmor hook,
as they've been removed from the LSM API.

Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:37 +10:00
John Johansen
c88d4c7b04 AppArmor: core policy routines
The basic routines and defines for AppArmor policy.  AppArmor policy
is defined by a few basic components.
      profiles - the basic unit of confinement contain all the information
                 to enforce policy on a task

                 Profiles tend to be named after an executable that they
                 will attach to but this is not required.
      namespaces - a container for a set of profiles that will be used
                 during attachment and transitions between profiles.
      sids - which provide a unique id for each profile

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:37 +10:00
John Johansen
736ec752d9 AppArmor: policy routines for loading and unpacking policy
AppArmor policy is loaded in a platform independent flattened binary
stream.  Verify and unpack the data converting it to the internal
format needed for enforcement.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:36 +10:00
John Johansen
0ed3b28ab8 AppArmor: mediation of non file objects
ipc:
AppArmor ipc is currently limited to mediation done by file mediation
and basic ptrace tests.  Improved mediation is a wip.

rlimits:
AppArmor provides basic abilities to set and control rlimits at
a per profile level.  Only resources specified in a profile are controled
or set.  AppArmor rules set the hard limit to a value <= to the current
hard limit (ie. they can not currently raise hard limits), and if
necessary will lower the soft limit to the new hard limit value.

AppArmor does not track resource limits to reset them when a profile
is left so that children processes inherit the limits set by the
parent even if they are not confined by the same profile.

Capabilities:  AppArmor provides a per profile mask of capabilities,
that will further restrict.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:35 +10:00
John Johansen
b5e95b4868 AppArmor: LSM interface, and security module initialization
AppArmor hooks to interface with the LSM, module parameters and module
initialization.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:38:35 +10:00
John Johansen
898127c34e AppArmor: functions for domain transitions
AppArmor routines for controling domain transitions, which can occur at
exec or through self directed change_profile/change_hat calls.

Unconfined tasks are checked at exec against the profiles in the confining
profile namespace to determine if a profile should be attached to the task.

Confined tasks execs are controlled by the profile which provides rules
determining which execs are allowed and if so which profiles should be
transitioned to.

Self directed domain transitions allow a task to request transition
to a given profile.  If the transition is allowed then the profile will
be applied, either immeditately or at exec time depending on the request.
Immeditate self directed transitions have several security limitations
but have uses in setting up stub transition profiles and other limited
cases.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:14 +10:00
John Johansen
6380bd8ddf AppArmor: file enforcement routines
AppArmor does files enforcement via pathname matching.  Matching is done
at file open using a dfa match engine.  Permission is against the final
file object not parent directories, ie. the traversal of directories
as part of the file match is implicitly allowed.  In the case of nonexistant
files (creation) permissions are checked against the target file not the
directory.  eg. In case of creating the file /dir/new, permissions are
checked against the match /dir/new not against /dir/.

The permissions for matches are currently stored in the dfa accept table,
but this will change to allow for dfa reuse and also to allow for sharing
of wider accept states.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:14 +10:00
John Johansen
63e2b42377 AppArmor: userspace interfaces
The /proc/<pid>/attr/* interface is used for process introspection and
commands.  While the apparmorfs interface is used for global introspection
and loading and removing policy.

The interface currently only contains the files necessary for loading
policy, and will be extended in the future to include sysfs style
single per file introspection inteface.

The old AppArmor 2.4 interface files have been removed into a compatibility
patch, that distros can use to maintain backwards compatibility.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:13 +10:00
John Johansen
e06f75a6a2 AppArmor: dfa match engine
A basic dfa matching engine based off the dfa engine in the Dragon
Book.  It uses simple row comb compression with a check field.

This allows AppArmor to do pattern matching in linear time, and also
avoids stack issues that an nfa based engine may have.  The dfa
engine uses a byte based comparison, with all values being valid.
Any potential character encoding are handled user side when the dfa
tables are created.  By convention AppArmor uses \0 to separate two
dependent path matches since \0 is not a valid path character
(this is done in the link permission check).

The dfa tables are generated in user space and are verified at load
time to be internally consistent.

There are several future improvements planned for the dfa engine:
* The dfa engine may be converted to a hybrid nfa-dfa engine, with
  a fixed size limited stack.  This would allow for size time
  tradeoffs, by inserting limited nfa states to help control
  state explosion that can occur with dfas.
* The dfa engine may pickup the ability to do limited dynamic
  variable matching, instead of fixing all variables at policy
  load time.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:13 +10:00
John Johansen
c75afcd153 AppArmor: contexts used in attaching policy to system objects
AppArmor contexts attach profiles and state to tasks, files, etc. when
a direct profile reference is not sufficient.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:12 +10:00
John Johansen
67012e8209 AppArmor: basic auditing infrastructure.
Update lsm_audit for AppArmor specific data, and add the core routines for
AppArmor uses for auditing.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:11 +10:00
John Johansen
cdff264264 AppArmor: misc. base functions and defines
Miscellaneous functions and defines needed by AppArmor, including
the base path resolution routines.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:11 +10:00