IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On the Turris Mox router different modules can be connected to the main
CPU board: currently a module with a SFP cage, a module with MiniPCIe
connector, a PCIe pass-through MiniPCIe connector module, a 4-port
switch module, an 8-port switch module, and a 4-port USB3 module.
For example:
[CPU]-[PCIe-pass-through]-[PCIe]-[8-port switch]-[8-port switch]-[SFP]
Each of this modules has an input and output shift register, and these
are connected via SPI to the CPU board.
Via SPI we are able to discover which modules are connected, in which
order, and we can also read some information about the modules (eg.
their interrupt status), and configure them.
From each module 8 bits can be read (of which low 4 bits identify the
module) and 8 bits can be written.
For example from the module with a SFP cage we can read the LOS,
TX-FAULT and MOD-DEF0 signals, while we can write TX-DISABLE and
RATE-SELECT signals.
This driver creates a new bus type, called "moxtet". For each Mox module
it finds via SPI, it creates a new device on the moxtet bus so that
drivers can be written for them.
It also implements a virtual interrupt controller for the modules which
send their interrupt status over the SPI shift register. These modules
do this in addition to sending their interrupt status via the shared
interrupt line. When the shared interrupt is triggered, we read from the
shift register and handle IRQs for all devices which are in interrupt.
The topology of how Mox modules are connected can then be read by
listing /sys/bus/moxtet/devices.
Link: https://lore.kernel.org/r/20190812161118.21476-2-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This removes the old Winbond w90x900 platform, also known
as Nuvoton NUC900. Wan Zongshun originally contributed
the port and maintained it since then.
From all I can tell, this platform is no longer being used
with modern kernels, based on various indications:
- The supported chips (nuc910/950/960) are no longer marketed
by the manufacturer
- Newer chips from the same family (nuc97x, nuc980, n329x)
that are still marketed have Linux BSPs but those were never
submitted for upstream inclusion.
- The last patch from the platform maintainer was in 2011.
- All patches to w90x900 platform specific files afterwards
are cleanups that were apparently done without access to
test hardware.
- Both the website and the email address listed in the
MAINTAINERS have become unreachable.
Link: https://lore.kernel.org/r/20190809202749.742267-17-arnd@arndb.de
Cc: "Wanzongshun (Vincent)" <wanzongshun@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ks8695 is an older SoC originally made by Kendin, which was later acquired
by Micrel, and subsequently by Microchip.
The platform port was originally contributed by Andrew Victor and Ben
Dooks, and later maintained by Greg Ungerer.
When I recently submitted cleanups, but Greg noted that the platform no
longer boots and nobody is using it any more, we decided to remove it.
Link: https://lore.kernel.org/r/20190809202749.742267-2-arnd@arndb.de
Cc: Andrew Victor <linux@maxim.org.za>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Link: https://wikidevi.com/wiki/Micrel
Link: https://lore.kernel.org/linux-arm-kernel/2bc41895-d4f9-896c-0726-0b2862fcbf25@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rename the bindings documentation file for Renesas EMEV2 IIC controller
from i2c-emev2.txt to renesas,iic-emev2.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for R-Car I2C controller
from i2c-rcar.txt to renesas,i2c.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
I would like to maintain the i2c-imx driver. Since I work with
different i.MX variants and have access to the hardware, I can spend
some time on the reviewing of this driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Pull in generic CPU topology changes from Paul Walmsley (RISC-V).
* tag 'common/for-v5.4-rc1/cpu-topology' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add an entry for generic architecture topology
base: arch_topology: update Kconfig help description
RISC-V: Parse cpu topology during boot.
arm: Use common cpu_topology structure and functions.
cpu-topology: Move cpu topology code to common code.
dt-binding: cpu-topology: Move cpu-map to a common binding.
Documentation: DT: arm: add support for sockets defining package boundaries
Fix typo (s/sysgmr/sysmgr/) in the header filepath.
Fixes: f36e789a1f8d ("mfd: altera-sysmgr: Add SOCFPGA System Manager")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Update MAINTAINERS to reflect that fs/iomap.c file
was splitted into separate files in fs/iomap/
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Fixes: cb7181ff4b1c ("iomap: move the main iteration code into a separate file")
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cleanup MAINTAINERS from zoran record since the driver was removed.
Fixes: 8dce4b265a53 ("media: zoran: remove deprecated driver")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the ti-sysc source files under the OMAP2+ entry so that
the get_maintainer script also generates the linux-omap
list to be cc'd for all patches touching these files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
More fscrypt definitions are being added, and we shouldn't use a
disproportionate amount of space in <linux/fs.h> for fscrypt stuff.
So move the fscrypt definitions to a new header <linux/fscrypt.h>.
For source compatibility with existing userspace programs, <linux/fs.h>
still includes the new header.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices. Done from immutable branch.
A counter subsystem patche in here as well.
Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.
New device support
* adis16460
- New driver based on ADIS framework which needed addition of support
for cs_change_delay. Includes device tree binding.
* cros_ec
- Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
- Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
- Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
- New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
- New driver for this ON Semiconductor Ambient light sensor.
Features and cleanups
* tree wide
- Drop error prints after platform_get_irq as already prints errors
internally if any occur.
* docs
- Document mounting matrix.
- Fix a missing newline at end of file.
* ad2s1210
- Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
- Add of_device_id array to explicity handling DT bindings.
* ad7606
- Lots of rework leading to support for software configure modes in ad7616
parts.
- Debugfs register access support.
* am2315
- Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
- Typo in module description.
* cm36651
- Convert to i2c_new_dummy_device.
- Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
- Calibscale support for accel, gyro and magnetometer.
- Tidy up some error codes to return the error from the stack rather than
-EIO.
- Determine protocol version.
- Add a sign vector to the core to fix sensor rotation if necessary.
Cannot just be done with mount matrix as already in use in many devices.
- Tidy up INFO_SCALE being in both the separate and shared lists.
- Drop a lot of dplicate code from the cros-ec-accel-legacy driver
and use the core provided code instead.
- Make frequency range available to userspace.
* counter / ftm-quaddec
- Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
- Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
- Use gpiod_set_value_cansleep as we don't care here and there is a
board out there where it needs to sleep.
- Switch to device managed APIs for all of probe and drop explict remove.
* hp03
- Convert to i2c_new_dummy_device.
* maxim thermocouple
- Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
- Fix typo in constant naming.
* mpu6050
- Use devm_add_action_or_reset in place of explicit error handling.
- Make text in Kconfig more explicit about which parts are supported.
* mxc4005
- Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
- Convert device tree bindings to yaml.
- Add a MAINTAINERS entry
* sc27xx
- Introduce a local struct device *dev pointer to avoid lots of deref.
- Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
- Typo fix in naming.
* si1145
- Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
- Lots of rework to enable switch to regmap.
- Regmap conversion at the end.
- Tidy up some inconsistencies in buffer setup ops.
- Tidy up an oddity by dropping get_irq_data_ready function in favour
of direct access.
- Stop allocating buffer in buffer enable in favour of just embedding
a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
- l3c device support (LSM6DSO and LSM6DSR)
- tidy up irq return logic which was strangely written.
- fix up an ABI quirk where this driver used separate scale
attributes, even though they were always shared by type.
* stk33xx
- Device tree bindings include manufacturer ID.
* stm32-adc
- Add control for supply to analog switches including DT bindings.
* stm32 timer
- Drop the quadrature mode support. Believed there were no users so
take this opportunity to drop this unwanted ABI.
* tsl2772
- Switch to device mangage APIs for all of probe and drop explicit remove.
- Use regulator_bulk_* APIs to reduce repitition.
* veml6070
- Convert to i2c_new_dummy_device.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl1RxVQRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0FohP8xAAjbWf431vsHQSt0Lmn4coh0XCBT26R9ys
ybIga540Mcy1q91H+biBenShLVImCBtXEBJ57YdVjtLgkr1HJAJjvxCXdE79TJet
Ak39CmTcTGrRyzYin2MOpWJJgCFc4Fg+E/kB8K7KIcperzQ48GDCzL5aJE/PksME
Ay/rZDno+vPKGLmvxYCuSpmINq1YhVMQu/IPYO5sc6zRdDtEV29TAdZ/x8aaD2oM
r1E22hm0h2wVLQRpbLUA5XUgoetQGmIYaUgbJPkpvxhuQYIlbLavODP7S0xDqAbT
VCRzrzeR8eHxA+EeZDE8IWC5xbmFTUBdUHhHfCDETONOi5CjaPC/QnowNOi1IC0H
k5XgBAO6Zju5QWpu+nHVdjwdJ1RftLVeCPatXorHLWWJv6UP8j/cNNKDAvBTlvhq
yfG/zW1VMTr/Q2VkokHnr2D8JxcARf/+AcR1BOu+pVszJ/+kgnXVNu3QLMilCTnN
+fzEfbErL7BfUBh19IqdB40XOojppuavyzAruiOjLGVrFRk3lwFP8FvVDy8MtPbO
/roYxohwc1M/kK3+Sl+4LfY2mX7orStZ5NNAYcu9yzg/6vv3Oh5Pxw2UsDto4MCC
ikDffzIGxXnJUzi3uIBthyvTHMX2y/EykikbjMkfsGOtCiFdcPGUl4iirsWkpebj
zrpff+V1vXM=
=aez5
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.4 cycle
Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices. Done from immutable branch.
A counter subsystem patche in here as well.
Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.
New device support
* adis16460
- New driver based on ADIS framework which needed addition of support
for cs_change_delay. Includes device tree binding.
* cros_ec
- Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
- Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
- Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
- New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
- New driver for this ON Semiconductor Ambient light sensor.
Features and cleanups
* tree wide
- Drop error prints after platform_get_irq as already prints errors
internally if any occur.
* docs
- Document mounting matrix.
- Fix a missing newline at end of file.
* ad2s1210
- Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
- Add of_device_id array to explicity handling DT bindings.
* ad7606
- Lots of rework leading to support for software configure modes in ad7616
parts.
- Debugfs register access support.
* am2315
- Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
- Typo in module description.
* cm36651
- Convert to i2c_new_dummy_device.
- Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
- Calibscale support for accel, gyro and magnetometer.
- Tidy up some error codes to return the error from the stack rather than
-EIO.
- Determine protocol version.
- Add a sign vector to the core to fix sensor rotation if necessary.
Cannot just be done with mount matrix as already in use in many devices.
- Tidy up INFO_SCALE being in both the separate and shared lists.
- Drop a lot of dplicate code from the cros-ec-accel-legacy driver
and use the core provided code instead.
- Make frequency range available to userspace.
* counter / ftm-quaddec
- Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
- Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
- Use gpiod_set_value_cansleep as we don't care here and there is a
board out there where it needs to sleep.
- Switch to device managed APIs for all of probe and drop explict remove.
* hp03
- Convert to i2c_new_dummy_device.
* maxim thermocouple
- Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
- Fix typo in constant naming.
* mpu6050
- Use devm_add_action_or_reset in place of explicit error handling.
- Make text in Kconfig more explicit about which parts are supported.
* mxc4005
- Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
- Convert device tree bindings to yaml.
- Add a MAINTAINERS entry
* sc27xx
- Introduce a local struct device *dev pointer to avoid lots of deref.
- Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
- Typo fix in naming.
* si1145
- Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
- Lots of rework to enable switch to regmap.
- Regmap conversion at the end.
- Tidy up some inconsistencies in buffer setup ops.
- Tidy up an oddity by dropping get_irq_data_ready function in favour
of direct access.
- Stop allocating buffer in buffer enable in favour of just embedding
a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
- l3c device support (LSM6DSO and LSM6DSR)
- tidy up irq return logic which was strangely written.
- fix up an ABI quirk where this driver used separate scale
attributes, even though they were always shared by type.
* stk33xx
- Device tree bindings include manufacturer ID.
* stm32-adc
- Add control for supply to analog switches including DT bindings.
* stm32 timer
- Drop the quadrature mode support. Believed there were no users so
take this opportunity to drop this unwanted ABI.
* tsl2772
- Switch to device mangage APIs for all of probe and drop explicit remove.
- Use regulator_bulk_* APIs to reduce repitition.
* veml6070
- Convert to i2c_new_dummy_device.
* tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (84 commits)
iio: hi8435: Drop hi8435_remove() by using devres for remaining elements
iio: hi8435: Use gpiod_set_value_cansleep()
iio:st_sensors: remove buffer allocation at each buffer enable
iio: imu: inv_mpu6050: be more explicit on supported chips
iio: light: noa1305: Add support for NOA1305
dt-bindings: Add binding document for NOA1305
iio: remove get_irq_data_ready() function pointer and use IRQ number directly
iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
iio: tsl2772: Use regulator_bulk_() APIs
iio: tsl2772: Use devm_iio_device_register
iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
iio: tsl2772: Use devm_add_action_or_reset
iio: Remove dev_err() usage after platform_get_irq()
iio: light: si1145: Use device-managed APIs
iio:pressure: preenable/postenable/predisable fixup for ST press buffer
iio:magn: preenable/postenable/predisable fixup for ST magn buffer
iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
iio:accel: preenable/postenable/predisable fixup for ST accel buffer
dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
iio: imu: st_lsm6dsx: add support to ISM330DHCX
...
My @amarulasolutions.com address stopped working this July, so update
to my @gmail.com address where you'll still be able to reach me.
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
On some ARM based systems, a separate Cortex-M based System Control
Processor(SCP) provides the overall power, clock, reset and system
control. System Control and Management Interface(SCMI) Message Protocol
is defined for the communication between the Application Cores(AP)
and the SCP.
Adds support for the resets provided using SCMI protocol for performing
reset management of various devices present on the SoC. Various reset
functionalities are achieved by the means of different ARM SCMI device
operations provided by the ARM SCMI framework.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl1QegseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGavMH/RBaR39ct3XXpPzC
yxmKJn/n692NXFKusfsfasitGHMdFom6HaCcKx4PpzX1QHnR34LJtMd1QvwM8cHz
FtbC68HyZBB91JOUzC38GbRufvVUsSeXg8YeBiF6BOoOP06OcOG+DKoPcKBOMXsR
MtJmgxEyedLT7ozEPTpowVBWulELJxkbe1MCc93xDXdOqT+aMuxZBASMJIgrufS7
uJTsJ/afHz6F29Mj6Q9lfIJJSHqSfMK/rPGP54xRdBgMWmAmNjA2aExyCK8PE/Yb
TChsrDjDz38ePuVaWfjtwFNWlWcq0Do8vJdPuAxZDdfaJlQDXQHCWXsJjrWD6oNy
ZhCq0zE=
=HcEO
-----END PGP SIGNATURE-----
Merge tag 'v5.3-rc4' into next
Sync up with mainline to bring in device_property_count_u32 andother
newer APIs.
drm-next-5.4-2019-08-09:
Same as drm-next-5.4-2019-08-06, but with the
readq/writeq stuff fixed and 5.3-rc3 backmerged.
amdgpu:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- Enable mclk DPM for Navi
- Misc DC display fixes
- Add perfmon support for DF
- Add scatter/gather display support for Raven
- Improve SMU handling for GPU reset
- RAS support for GFX
- Drop last of drmP.h
- Add support for wiping memory on buffer release
- Allow cursor async updates for fb swaps
- Misc fixes and cleanups
amdkfd:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- CWSR trap handlers updates for gfx9, 10
- Drop last of drmP.h
- Update MAINTAINERS
radeon:
- Misc fixes and cleanups
- Make kexec more reliable by tearing down the GPU
ttm:
- Add release_notify callback
uapi:
- Add wipe memory on release flag for buffer creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: resolved conflicts with ttm resv moving]
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809184807.3381-1-alexander.deucher@amd.com
Here are some small char/misc driver fixes for 5.3-rc4.
Two of these are for the habanalabs driver for issues found when running
on a big-endian system (are they still alive?) The others are tiny
fixes reported by people, and a MAINTAINERS update about the location of
the fpga development tree.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXU6uwA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymBrQCfRh8brBuZ4ZoeP9aVgjkPDhwdBLkAn38RdH6c
96J1xGLZf1+CN7GVLnFD
=YUWU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes Greg KH:
"Here are some small char/misc driver fixes for 5.3-rc4.
Two of these are for the habanalabs driver for issues found when
running on a big-endian system (are they still alive?) The others are
tiny fixes reported by people, and a MAINTAINERS update about the
location of the fpga development tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
MAINTAINERS: Move linux-fpga tree to new location
nvmem: Use the same permissions for eeprom as for nvmem
habanalabs: fix host memory polling in BE architecture
habanalabs: fix F/W download in BE architecture
PSCI firmware is the standard power management control for
all ARM64 based platforms and it is also deployed on some
ARM 32 bit platforms to date.
Idle state entry in PSCI is currently achieved by calling
arm_cpuidle_init() and arm_cpuidle_suspend() in a generic
idle driver, which in turn relies on ARM/ARM64 CPUidle back-end
to relay the call into PSCI firmware if PSCI is the boot method.
Given that PSCI is the standard idle entry method on ARM64 systems
(which means that no other CPUidle driver are expected on ARM64
platforms - so PSCI is already a generic idle driver), in order to
simplify idle entry and code maintenance, it makes sense to have a PSCI
specific idle driver so that idle code that it is currently living in
drivers/firmware directory can be hoisted out of it and moved
where it belongs, into a full-fledged PSCI driver, leaving PSCI code
in drivers/firmware as a pure firmware interface, as it should be.
Implement a PSCI CPUidle driver. By default it is a silent Kconfig entry
which is left unselected, since it selection would clash with the
generic ARM CPUidle driver that provides a PSCI based idle driver
through the arm/arm64 arches back-ends CPU operations.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will@kernel.org>
- update fbdev git tree in MAINTAINERS file
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yQC5
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux
Pull fbdev fix from Bartlomiej Zolnierkiewicz:
"fbdev patches will now go to upstream through drm-misc tree for
improved maintainership and better integration testing so update
MAINTAINERS file accordingly"
* tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux:
MAINTAINERS: handle fbdev changes through drm-misc tree
Lots of small fixes at this time since we've received the ASoC
fix batch now.
- Some coverage in ASoC core mostly for minor issues like NULL
checks for DPCM and proper error handling in DAI instantiation
- A collection of small device-specific changes in various ASoC
codec and platform drivers
- OF-tree refcount fixes in a few ASoC drivers
- Fixes of memory leaks in the error paths of various ASoC / ALSA
drivers
- A workaround for a long-standing issue on AMD HD-audio device
- Updates of MAINTAINERS, mail addresses, file permission fixups
-----BEGIN PGP SIGNATURE-----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=avrM
-----END PGP SIGNATURE-----
Merge tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes at this time since we've received the ASoC fix
batch now.
- Some coverage in ASoC core mostly for minor issues like NULL checks
for DPCM and proper error handling in DAI instantiation
- A collection of small device-specific changes in various ASoC codec
and platform drivers
- OF-tree refcount fixes in a few ASoC drivers
- Fixes of memory leaks in the error paths of various ASoC / ALSA
drivers
- A workaround for a long-standing issue on AMD HD-audio device
- Updates of MAINTAINERS, mail addresses, file permission fixups"
* tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits)
ALSA: firewire: fix a memory leak bug
sound: fix a memory leak bug
ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)
ALSA: hiface: fix multiple memory leak bugs
ALSA: hda - Don't override global PCM hw info flag
ALSA: usb-audio: fix a memory leak bug
ASoC: max98373: Remove executable bits
ASoC: amd: acp3x: use dma address for acp3x dma driver
ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver
ASoC: max98373: add 88200 and 96000 sampling rate support
ASoC: sun4i-i2s: Incorrect SR and WSS computation
MAINTAINERS: Update Intel ASoC drivers maintainers
ASoC: ti: davinci-mcasp: Correct slot_width posed constraint
ASoC: rockchip: Fix mono capture
ASoC: Intel: Fix some acpi vs apci typo in somme comments
ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode
ASoC: Fail card instantiation if DAI format setup fails
ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread
ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links
ASoC: dapm: fix a memory leak bug
...
fbdev patches will now go to upstream through drm-misc tree (IOW
starting with v5.4 merge window fbdev changes will be included in
DRM pull request) for improved maintainership and better integration
testing. Update MAINTAINERS file accordingly.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXUwPUAAKCRDj7w1vZxhR
xQ4lAQDK2ijx29YHeZspbOwP4Nwq95DFs1uQcSm5GvbRt1JSowD9EwkLeNfkPkel
Xv1Ts/Frgq7ckH2e2zkLPyCOFCHd0wA=
=rIUl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
Add Zhou Wang as a maintainer for HiSilicon QM and ZIP controller driver.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ECC support for Mellanox BlueField SoC DDR controller.
This requires SMC to the running Arm Trusted Firmware to report
what is the current memory configuration.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Shravan Kumar Ramani <sramani@mellanox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Joe rightly points out that we should be using the "Obsolete" status for
these two subsystems.
Also I got the path name wrong for the wusbcore tree.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 71ed79b0e4be ("USB: Move wusbcore and UWB to staging as it is obsolete")
Link: https://lore.kernel.org/r/20190808092509.GA20173@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renesas media binding documentation files use a naming schema of
'renesas,<module>.txt'. Rename the VIN and CSI-2 files to match this
pattern.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The UWB and wusbcore code is long obsolete, so let us just move the code
out of the real part of the kernel and into the drivers/staging/
location with plans to remove it entirely in a few releases.
Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
This reverts commit 684ca71259a69c5a3019da72fe718bf983841926.
I overlooked that the Rev-by tag was given in advance assuming a fix was
made for the next revision.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This reverts commit d13ed84b195cc6e5789b446f07aede357939f7ad.
I overlooked that the Rev-by tag was given in advance assuming a fix was
made for the next revision.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
I'm leaving the role of amdkfd maintainer. Therefore, update the relevant
entry in the MAINTAINERS file with the name of the new maintainer.
Good Luck!
v3: update mailing list, file list (Alex)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> (v2)
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.
The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl1IKi0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NWqB/958QE+MLcaVNkjRAYSCGb56vzEUAlz
jXLuOvdlXWzEmuc6nV32a70KcFngXEvXHn9U+mB1pz45q4jacsghafFeWiL1Dq2E
UzLy2/FtZQtmAVMlxSwcdP1uJzAyfDchcyGJEO8QOIIXNDMSqEINdzGkfqCp8MDM
mHIz8pIW1FlAnZgXp+AWqgn0xrueUzjEiKr4IBp1BoaqOc4rXke823o/SekdNbyC
FkeMcb9LdTj22+DG8Z1DqOqjYHHx7/CwOcALjQlU2pK+3uGtOENXMYuwCcBKOIMc
DAbIlhXk+51fZ0r31vhjMrN7NkLqD/cNzn8QEzBJ7F3YckIDbbuu+uYH
=ENjL
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.3-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.3
A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.
The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.
At the end of the v5.3 upstream kernel development cycle, Simon will be
stepping down from his role as Renesas SoC maintainer. Starting with
the v5.4 development cycle, Geert is taking over this role.
Add Geert as a co-maintainer, and add his git repository and branch.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Has not had any bake time or testing, since its just changes to a text file.
-----BEGIN PGP SIGNATURE-----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=bvqJ
-----END PGP SIGNATURE-----
Merge tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux
Pull SafeSetID maintainer update from Micah Morton:
"Add entry in MAINTAINERS file for SafeSetID LSM"
* tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux:
Add entry in MAINTAINERS file for SafeSetID LSM
This LSM was added in v5.1 and needs an entry in the MAINTAINERS file.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Rename the bindings documentation file for Renesas EMEV2 IIC controller
from i2c-emev2.txt to renesas,iic-emev2.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for RIIC controller
from i2c-riic.txt to renesas,riic.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for R-Car I2C controller
from i2c-rcar.txt to renesas,rcar.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rename the bindings documentation file for sh_mobile I2C controller
from i2c-sh_mobile.txt to renesas,iic.txt.
This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The filenames for cifs documentation is not using the same
convention as almost all Kernel documents is using. So,
rename them to a more appropriate name. Then, manually convert
the documentation files for CIFS to ReST.
By doing a manual conversion, we can preserve the original
author's style, while making it to look more like the other
Kernel documents.
Most of the conversion here is trivial. The most complex one was
the README file (which was renamed to usage.rst).
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Those are due to recent changes. Most of the issues
can be automatically fixed with:
$ ./scripts/documentation-file-ref-check --fix
The only exception was the sound binding with required
manual work.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
