Commit Graph

1030 Commits

Author SHA1 Message Date
Stanislaw Gruszka
6863255bd0 cfg80211/mac80211: avoid state mishmash on deauth
Avoid situation when we are on associate state in mac80211 and
on disassociate state in cfg80211. This can results on crash
during modules unload (like showed on this thread:
http://marc.info/?t=134373976300001&r=1&w=2) and possibly other
problems.

Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-15 17:21:34 +02:00
David S. Miller
a248afdc1b Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
Here is another batch of updates intended for 3.7...

Highlights include an hci_connect re-write in Bluetooth, HCI/LLC
layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP
raw sockets support, improved IBSS auth frame handling in mac80211,
full-MAC AP mode notification support in mac80211, a lot of attention
paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k,
mwifiex, and rt2x00, and various other updates.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30 02:30:16 -04:00
David S. Miller
6a06e5e1bb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/team/team.c
	drivers/net/usb/qmi_wwan.c
	net/batman-adv/bat_iv_ogm.c
	net/ipv4/fib_frontend.c
	net/ipv4/route.c
	net/l2tp/l2tp_netlink.c

The team, fib_frontend, route, and l2tp_netlink conflicts were simply
overlapping changes.

qmi_wwan and bat_iv_ogm were of the "use HEAD" variety.

With help from Antonio Quartulli.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28 14:40:49 -04:00
John W. Linville
c487606f83 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	net/nfc/netlink.c

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28 11:11:16 -04:00
John W. Linville
5419575e83 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2012-09-25 15:54:32 -04:00
Vladimir Kondratiev
64629b9d41 cfg80211: Fix regulatory check for 60GHz band frequencies
The current regulatory code on cfg80211 performs a check to
see if a regulatory rule belongs to an IEEE band so that if
a Country IE is received and no rules are specified for a
band (which is allowed by IEEE) those bands are left intact.
The current band check assumes a rule is bound to a band
if the rule's start or end frequency is less than 2 GHz
apart from the center of frequency being inspected.

In order to support 60 GHz for 802.11ad we need to increase
this to account for the channel spacing of 2160 MHz whereby
a channel somewhere in the middle of a regulatory rule may
be more than 2 GHz apart from either the beginning or
end of the frequency rule.

Without a fix for this even though channels 1-3 are allowed world
wide on the rule (57240 - 63720 @ 2160), channel 2 at 60480 MHz
will end up getting disabled given that it is 3240 MHz from
both the frequency rule start and end frequency. Fix this by
using 2 GHz separation assumption for the 2.4 and 5 GHz bands
but for 60 GHz use a 10 GHz separation before assuming a rule
is not part of the band.

Since we have no 802.11ad drivers yet merged this change has
no impact to existing Linux upstream device drivers.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-25 09:41:14 +02:00
Luis R. Rodriguez
a85d0d7f34 cfg80211: fix possible circular lock on reg_regdb_search()
When call_crda() is called we kick off a witch hunt search
for the same regulatory domain on our internal regulatory
database and that work gets kicked off on a workqueue, this
is done while the cfg80211_mutex is held. If that workqueue
kicks off it will first lock reg_regdb_search_mutex and
later cfg80211_mutex but to ensure two CPUs will not contend
against cfg80211_mutex the right thing to do is to have the
reg_regdb_search() wait until the cfg80211_mutex is let go.

The lockdep report is pasted below.

cfg80211: Calling CRDA to update world regulatory domain

======================================================
[ INFO: possible circular locking dependency detected ]
3.3.8 #3 Tainted: G           O
-------------------------------------------------------
kworker/0:1/235 is trying to acquire lock:
 (cfg80211_mutex){+.+...}, at: [<816468a4>] set_regdom+0x78c/0x808 [cfg80211]

but task is already holding lock:
 (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (reg_regdb_search_mutex){+.+...}:
       [<800a8384>] lock_acquire+0x60/0x88
       [<802950a8>] mutex_lock_nested+0x54/0x31c
       [<81645778>] is_world_regdom+0x9f8/0xc74 [cfg80211]

-> #1 (reg_mutex#2){+.+...}:
       [<800a8384>] lock_acquire+0x60/0x88
       [<802950a8>] mutex_lock_nested+0x54/0x31c
       [<8164539c>] is_world_regdom+0x61c/0xc74 [cfg80211]

-> #0 (cfg80211_mutex){+.+...}:
       [<800a77b8>] __lock_acquire+0x10d4/0x17bc
       [<800a8384>] lock_acquire+0x60/0x88
       [<802950a8>] mutex_lock_nested+0x54/0x31c
       [<816468a4>] set_regdom+0x78c/0x808 [cfg80211]

other info that might help us debug this:

Chain exists of:
  cfg80211_mutex --> reg_mutex#2 --> reg_regdb_search_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(reg_regdb_search_mutex);
                               lock(reg_mutex#2);
                               lock(reg_regdb_search_mutex);
  lock(cfg80211_mutex);

 *** DEADLOCK ***

3 locks held by kworker/0:1/235:
 #0:  (events){.+.+..}, at: [<80089a00>] process_one_work+0x230/0x460
 #1:  (reg_regdb_work){+.+...}, at: [<80089a00>] process_one_work+0x230/0x460
 #2:  (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211]

stack backtrace:
Call Trace:
[<80290fd4>] dump_stack+0x8/0x34
[<80291bc4>] print_circular_bug+0x2ac/0x2d8
[<800a77b8>] __lock_acquire+0x10d4/0x17bc
[<800a8384>] lock_acquire+0x60/0x88
[<802950a8>] mutex_lock_nested+0x54/0x31c
[<816468a4>] set_regdom+0x78c/0x808 [cfg80211]

Reported-by: Felix Fietkau <nbd@openwrt.org>
Tested-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-18 20:43:23 -04:00
Pandiyarajan Pitchaimuthu
ed44a951c7 cfg80211/nl80211: Notify connection request failure in AP mode
In AP mode, when a station requests connection to an AP and if the
request is failed for particular reason, userspace is notified about the
failure through NL80211_CMD_CONN_FAILED command. Reason for the failure
is sent through the attribute NL80211_ATTR_CONN_FAILED_REASON.

Signed-off-by: Pandiyarajan Pitchaimuthu <c_ppitch@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-18 19:54:06 +02:00
Alan Cox
f3baed51f4 wireless: remove unreachable code
The only case where intersected_rd can become non NULL is within an if. All
paths from that if return, so the end chunk has therefore squawked its
last and is no more.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-18 19:54:05 +02:00
John W. Linville
9316f0e3c6 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2012-09-14 13:53:49 -04:00
Eric W. Biederman
15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
John W. Linville
fac805f8c1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2012-09-07 15:07:55 -04:00
Johannes Berg
944b9e375d Merge remote-tracking branch 'mac80211/master' into mac80211-next
Pull in mac80211.git to let the next patch apply
without conflicts, also resolving a hwsim conflict.

Conflicts:
	drivers/net/wireless/mac80211_hwsim.c

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06 15:56:02 +02:00
John W. Linville
785a7de9ee Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2012-09-05 14:48:15 -04:00
Hila Gonen
768be59f30 cfg80211: fix indentation
checkpatch pointed out an issue, fix it.

Signed-off-by: Hila Gonen <hila.gonen@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05 16:54:05 +02:00
Arend van Spriel
e5f5b2fb07 wext: include wireless event id when it has a size problem
The wext code checks is the event data is within size limits.
When this check fails a message is logged with violating size.
This patch adds the event id to put us on the right track for
resolving that violation.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05 16:12:44 +02:00
Wei Yongjun
00a9ac4c01 cfg80211: use list_move_tail instead of list_del/list_add_tail
Using list_move_tail() instead of list_del() + list_add_tail().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05 15:39:37 +02:00
Wei Yongjun
b4e4f47e94 nl80211: fix possible memory leak nl80211_connect()
connkeys is malloced in nl80211_parse_connkeys() and should
be freed in the error handling case, otherwise it will cause
memory leak.

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04 18:06:00 +02:00
John W. Linville
f20b6213f1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2012-08-24 12:25:30 -04:00
Johannes Berg
98104fdeda cfg80211: add P2P Device abstraction
In order to support using a different MAC address
for the P2P Device address we must first have a
P2P Device abstraction that can be assigned a MAC
address.

This abstraction will also be useful to support
offloading P2P operations to the device, e.g.
periodic listen for discoverability.

Currently, the driver is responsible for assigning
a MAC address to the P2P Device, but this could be
changed by allowing a MAC address to be given to
the NEW_INTERFACE command.

As it has no associated netdev, a P2P Device can
only be identified by its wdev identifier but the
previous patches allowed using the wdev identifier
in various APIs, e.g. remain-on-channel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20 13:58:21 +02:00
Johannes Berg
48613ece3d wireless: add radiotap A-MPDU status field
Define the A-MPDU status field in radiotap, also
update the radiotap parser for it and the MCS field
that was apparently missed last time.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20 13:53:09 +02:00
Daniel Drake
1f6fc43e62 cfg80211: process pending events when unregistering net device
libertas currently calls cfg80211_disconnected() when it is being
brought down. This causes an event to be allocated, but since the
wdev is already removed from the rdev by the time that the event
processing work executes, the event is never processed or freed.
http://article.gmane.org/gmane.linux.kernel.wireless.general/95666

Fix this leak, and other possible situations, by processing the event
queue when a device is being unregistered. Thanks to Johannes Berg for
the suggestion.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: stable@vger.kernel.org
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06 14:29:58 -04:00
Paul Stewart
899852af60 cfg80211: Clear "beacon_found" on regulatory restore
Restore the default state to the "beacon_found" flag when
the channel flags are restored.  Otherwise, we can end up
with a channel that we can no longer transmit on even when
we can see beacons on that channel.

Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-02 15:34:22 +02:00
Seth Forshee
03f6b0843a cfg80211: add channel flag to prohibit OFDM operation
Currently the only way for wireless drivers to tell whether or not OFDM
is allowed on the current channel is to check the regulatory
information. However, this requires hodling cfg80211_mutex, which is not
visible to the drivers.

Other regulatory restrictions are provided as flags in the channel
definition, so let's do similarly with OFDM. This patch adds a new flag,
IEEE80211_CHAN_NO_OFDM, to tell drivers that OFDM on a channel is not
allowed. This flag is set on any channels for which regulatory indicates
that OFDM is prohibited.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-02 15:30:49 +02:00
Vladimir Kondratiev
e21768928d cfg80211: unify IE search
Remove ah-hoc IE search code found in the ieee80211_bss_get_ie()
and use cfg80211_find_ie() instead.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-31 16:11:01 +02:00
Johannes Berg
fcb06702f0 Merge remote-tracking branch 'wireless/master' into mac80211 2012-07-30 09:13:03 +02:00
Stanislaw Gruszka
5e31fc0815 wireless: reg: restore previous behaviour of chan->max_power calculations
commit eccc068e8e
Author: Hong Wu <Hong.Wu@dspg.com>
Date:   Wed Jan 11 20:33:39 2012 +0200

    wireless: Save original maximum regulatory transmission power for the calucation of the local maximum transmit pow

changed the way we calculate chan->max_power as min(chan->max_power,
chan->max_reg_power). That broke rt2x00 (and perhaps some other
drivers) that do not set chan->max_power. It is not so easy to fix this
problem correctly in rt2x00.

According to commit eccc068e8 changelog, change claim only to save
maximum regulatory power - changing setting of chan->max_power was side
effect. This patch restore previous calculations of chan->max_power and
do not touch chan->max_reg_power.

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-25 16:11:12 +02:00
John W. Linville
90b90f60c4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2012-07-20 12:30:48 -04:00
Mohammed Shafi Shajakhan
ebd0fd2b1a cfg80211: Fix mutex locking in reg_last_request_cell_base
should fix the following issue

	[ 3229.815012] [ BUG: lock held when returning to user space! ]
	[ 3229.815016] 3.5.0-rc7-wl #28 Tainted: G        W  O
	[ 3229.815017]
	------------------------------------------------
	[ 3229.815019] wpa_supplicant/5783 is leaving the kernel with locks still held!
	[ 3229.815022] 1 lock held by wpa_supplicant/5783:
	[ 3229.815023]  #0: (reg_mutex){+.+.+.}, at: [<fa65834d>]
	reg_last_request_cell_base+0x1d/0x60 [cfg80211]

Cc: Luis Rodriguez <mcgrof@gmail.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Tested-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-18 17:03:15 +02:00
Luis R. Rodriguez
14cdf11201 cfg80211: remove regulatory_update()
regulatory_update() just calls wiphy_update_regulatory().
wiphy_update_regulatory() assumes you already have
the reg_mutex held so just move the call within locking
context and kill the superfluous regulatory_update().

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 12:16:41 +02:00
Luis R. Rodriguez
f8a1c77457 cfg80211: make regulatory_update() static
Now that we have wiphy_regulatory_register() we can
tuck away the core's regulatory_update() call there
and make it static.

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 12:16:40 +02:00
Luis R. Rodriguez
bfead0808c cfg80211: rename reg_device_remove() to wiphy_regulatory_deregister()
This makes it clearer what we're doing. This now makes a bit
more sense given that regardless of the wiphy if the cell
base station hint feature is supported we will be modifying the
way the regulatory core behaves.

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 12:16:39 +02:00
Luis R. Rodriguez
57b5ce072e cfg80211: add cellular base station regulatory hint support
Cellular base stations can provide hints to cfg80211 about
where they think we are. This can be done for example on
a cell phone. To enable these hints we simply allow them
through as user regulatory hints but we allow userspace
to clasify the hint as either coming directly from the
user or coming from a cellular base station. This option
is only available when you enable
CONFIG_CFG80211_CERTIFICATION_ONUS.

The base station hints themselves will not be processed
by the core unless at least one device on the system
supports this feature.

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 12:16:39 +02:00
Luis R. Rodriguez
b594bab902 cfg80211: add CONFIG_CFG80211_CERTIFICATION_ONUS
This adds CONFIG_CFG80211_CERTIFICATION_ONUS which is to
be used for features / code which require a bit of work on
the system integrator's part to ensure that the system will
still pass 802.11 regulatory certification. This option is
also usable for researchers and experimenters looking to add
code in the kernel without impacting compliant code.

We'd use CONFIG_EXPERT alone but it seems that most standard
Linux distributions are enabling CONFIG_EXPERT already. This
allows us to define 802.11 specific kernel features under a
flag that is intended by design to be disabled by standard
Linux distributions, and only enabled by system integrators
or distributions that have done work to ensure regulatory
certification on the system with the enabled features.

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 12:13:51 +02:00
Kalle Valo
959085352b cfg80211: fix set_regdom() to cancel requests with same alpha2
While adding regulatory support to ath6kl I noticed that I easily
got the regulatory code confused. The way to reproduce the bug was:

1. iw reg set FI (in userspace)
2. cfg80211 calls ath6kl_reg_notify(FI)
3. ath6kl sets regdomain in firmware
4. firmware sends regdomain event to notify about the new regdomain (FI)
5. ath6kl calls regulatory_hint(FI)

And this (from FI to FI transition) confuses cfg80211 and after that I
only get "Pending regulatory request, waiting for it to be
processed...." messages and regdomain changes won't work anymore.

The reason why ath6kl calls regulatory_hint() is that firmware can change
the regulatory domain by it's own, for example due to 11d IEs. I could
of course workaround this in ath6kl but I think it's better to handle
the case in cfg80211.

The fix is pretty simple, use a different error code if the regdomain is
same and then just set the request processed so that it doesn't block new
requests.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 12:00:43 +02:00
Thomas Pedersen
84f10708f7 cfg80211: support TX error rate CQM
Let the user configure serveral TX error conection quality monitoring
parameters: % error rate, survey interval, and # of attempted packets.

On exceeding the TX failure rate over the given interval, the driver
will send a CQM notify event with the actual TX failure rate and
packets attempted.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 11:57:23 +02:00
Johannes Berg
00f5335079 nl80211: add wdev ID as u64 as it should
In one of my previous patches I erroneously
used nla_put_u32 for the wdev_id, fix that
to use nla_put_u64.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17 11:53:57 +02:00
Johannes Berg
4290cb4bf2 cfg80211: reduce monitor interface tracking
Revert commit b78e8ceac2
("cfg80211: track monitor channel") and remove the
set_monitor_enabled() callback.

Due to the tracking happening in NETDEV_PRE_UP, it had
introduced bugs because the monitor interface callback
would be called before the device was started. It looks
like there's no way to fix this, and using NETDEV_PRE_UP
is broken anyway (since there's no NETDEV_UP_FAIL), so
remove all that code, track interfaces in NETDEV_UP and
also stop tracking the monitor channel in cfg80211.

This mostly reverts to before the tracking, except that
we keep the interface count tracking so that setting the
monitor channel can be rejected properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13 16:16:11 +02:00
Johannes Berg
5b7ccaf3fc cfg80211/mac80211: re-add get_channel operation
This essentially reverts commit 2e165b8184 but
introduces the get_channel operation with a new
wireless_dev argument so that you can retrieve
the channel per interface. This is necessary as
even though we can track all interface channels
(except monitor) we can't track the channel type
used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13 16:16:11 +02:00
Johannes Berg
ae33bd817a nl80211: allow enabling WoWLAN without triggers
It may be desirable to use WoWLAN without triggers to
keep the connection alive to the AP while suspended.
Allow this use by enabling WoWLAN without triggers if
no triggers were requested.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12 22:30:34 +02:00
John W. Linville
38a0084063 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2012-07-12 13:44:50 -04:00
Felix Fietkau
f53594a0d8 cfg80211: ignore channel state for stopped AP/mesh interfaces
Without this change, running AP + station on the same wiphy
does not work since the commit "cfg80211: add channel checking
for iface combinations". The stopped AP prevents the client
from connecting to an AP on a different channel.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[line-break commit message to < 72 chars]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12 16:18:17 +02:00
Johannes Berg
8e95ea49c9 cfg80211: fix locking and lockdep complaints
To call cfg80211_get_chan_state() we need to lock
the wdev, so we need to lock the wdev_iter mutex
in cfg80211_can_use_iftype_chan(). This needs to
use nested locking for lockdep.

Also, cfg80211_get_chan_state() doesn't actually
use the rdev, so remove that completely including
the lock assertion that isn't needed.

Reported-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12 12:10:49 +02:00
Johannes Berg
fd0142844e nl80211: move scan API to wdev
The new P2P Device will have to be able to scan for
P2P search, so move scanning to use struct wireless_dev
instead of struct net_device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12 12:10:41 +02:00
Johannes Berg
1c90f9d404 nl80211: send interface after creation
After a new virtual interface is created, reply
to userspace with a message detailing it so it
knows the new wdev identifier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12 12:10:40 +02:00
Johannes Berg
84efbb84cf cfg80211: use wireless_dev for interface management
In order to be able to create P2P Device wdevs, move
the virtual interface management over to wireless_dev
structures.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12 12:08:10 +02:00
Johannes Berg
71bbc99438 cfg80211: use wdev in mgmt-tx/ROC APIs
The management frame and remain-on-channel APIs will be
needed in the P2P device abstraction, so move them over
to the new wdev-based APIs. Userspace can still use both
the interface index and wdev identifier for them so it's
backward compatible, but for the P2P Device wdev it will
be able to use the wdev identifier only.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09 14:51:47 +02:00
Johannes Berg
ba22fb5b25 nl80211: don't assume wdev->netdev exists
There are a few places that iterate the wdev
list and assume wdev->netdev exists, check
there. The rfkill one has to be extended for
each non-netdev type later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09 14:51:46 +02:00
Johannes Berg
72fb2abcf5 nl80211: retrieve interface data by wdev
Since soon there will be virtual interfaces that
don't have a netdev, use the wdev identifier for
the API to retrieve interface data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09 14:51:46 +02:00
Johannes Berg
1bf614ef79 nl80211: add NL80211_FLAG_NEED_WDEV
Some nl80211 callbacks will soon need the wdev instead
of the netdev, so add NL80211_FLAG_NEED_WDEV to allow
them to request that. Add NL80211_FLAG_NEED_WDEV_UP as
well which checks the netdev is UP if one exists.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09 14:51:46 +02:00