Commit Graph

11966 Commits

Author SHA1 Message Date
Linus Torvalds
7a932e5702 asm-generic: cross-architecture timer cleanup
This cleans up two ancient timer features that were never completed in
 the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
 
 There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
 of clocksource implementations, the ARM EBSA110 platform. Rather than
 changing to use modern timekeeping, we remove the platform entirely as
 Russell no longer uses his machine and nobody else seems to have one
 any more.
 
 The conditional code for using arch_gettimeoffset() is removed as
 a result.
 
 For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
 not using clockevent drivers: parisc, ia64, most of m68k, and one
 Arm platform. These all do timer ticks slighly differently, and this
 gets cleaned up to the point they at least all call the same helper
 function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
 in Kconfig, the polarity is now reversed, with the few remaining ones
 selecting LEGACY_TIMER_TICK instead.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1v8ACgkQmmx57+YA
 GNmCvQ/9EDlgCt92r8SB+LGafDtgB8TUQZeIrs9S2mByzdxwnw0lxObIXFCnhQgh
 RpG3dR+ONRDnC5eI149B377JOEFMZWe2+BtYHUHkFARtUEWatslQcz7yAGvVRK/l
 TS/qReb6piKltlzuanF1bMZbjy2OhlaDRcm+OlC3y5mALR33M4emb+rJ6cSdfk3K
 v1iZhrxtfQT77ztesh/oPkPiyQ6kNcz7SfpyYOb6f5VLlml2BZ7YwBSVyGY7urHk
 RL3XqOUP4KKlMEAI8w0E2nvft6Fk+luziBhrMYWK0GvbmI1OESENuX/c6tgT2OQ1
 DRaVHvcPG/EAY8adOKxxVyHhEJDSoz5GJV/EtjlOegsJk6RomczR1uuiT3Kvm7Ah
 PktMKv4xQht1E15KPSKbOvNIEP18w2s5z6gw+jVDv8pw42pVEQManm1D+BICqrhl
 fcpw6T1drf9UxAjwX4+zXtmNs+a+mqiFG8puU4VVgT4GpQ8umHvunXz2WUjZO0jc
 3m8ErJHBvtJwW5TOHGyXnjl9SkwPzHOfF6IcXTYWEDU4/gQIK9TwUvCjLc0lE27t
 FMCV2ds7/K1CXwRgpa5IrefSkb8yOXSbRZ56NqqF7Ekxw4J5bYRSaY7jb+qD/e+3
 5O1y+iPxFrpH+16hSahvzrtcdFNbLQvBBuRtEQOYuHLt2UJrNoU=
 =QpNs
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
 "This cleans up two ancient timer features that were never completed in
  the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.

  There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
  of clocksource implementations, the ARM EBSA110 platform. Rather than
  changing to use modern timekeeping, we remove the platform entirely as
  Russell no longer uses his machine and nobody else seems to have one
  any more.

  The conditional code for using arch_gettimeoffset() is removed as a
  result.

  For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
  not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
  platform. These all do timer ticks slighly differently, and this gets
  cleaned up to the point they at least all call the same helper
  function.

  Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
  Kconfig, the polarity is now reversed, with the few remaining ones
  selecting LEGACY_TIMER_TICK instead"

* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  timekeeping: default GENERIC_CLOCKEVENTS to enabled
  timekeeping: remove xtime_update
  m68k: remove timer_interrupt() function
  m68k: change remaining timers to legacy_timer_tick
  m68k: m68328: use legacy_timer_tick()
  m68k: sun3/sun3c: use legacy_timer_tick
  m68k: split heartbeat out of timer function
  m68k: coldfire: use legacy_timer_tick()
  parisc: use legacy_timer_tick
  ARM: rpc: use legacy_timer_tick
  ia64: convert to legacy_timer_tick
  timekeeping: add CONFIG_LEGACY_TIMER_TICK
  timekeeping: remove arch_gettimeoffset
  net: remove am79c961a driver
  ARM: remove ebsa110 platform
2020-12-16 00:07:17 -08:00
Linus Torvalds
157807123c asm-generic: mmu-context cleanup
This is a cleanup series from Nicholas Piggin, preparing for
 later changes. The asm/mmu_context.h header are generalized
 and common code moved to asm-gneneric/mmu_context.h.
 
 This saves a bit of code and makes it easier to change in
 the future.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1LsACgkQmmx57+YA
 GNm6kBAAq4/n6nuNnh6b9LhjXaZRG75gEyW7JvHl8KE5wmZHwDHqbwiQgU1b3lUs
 JJGbfKqi5ASKxNg6MpfYodmCOqeTUUYG0FUCb6lMhcxxMdfLTLYBvkNd6Y143M+T
 boi5b/iz+OUQdNPzlVeSsUEVsD59FIXmP/GhscWZN9VAyf/aLV2MDBIOhrDSJlPo
 ObexnP0Iw1E1NRQYDQ6L2dKTHa6XmHyUtw40ABPmd/6MSd1S+D+j3FGg+CYmvnzG
 k9g8FbNby8xtUfc0pZV4W/322WN8cDFF9bc04eTDZiAv1bk9lmfvWJ2bWjs3s2qt
 RO/suiZEOAta/WUX9vVLgYn2td00ef+AyjNUgffiUfvQfl++fiCDFTGl+MoCLjbh
 xQUPcRuRdED7bMKNrC0CcDOSwWEBWVXvkU/szBLDeE1sPjXzGQ80q1Y72k9y961I
 mqg7FrHqjZsxT9luXMAzClHNhXAtvehkJZBIdHlFok83EFoTQp48Da4jaDuOOhlq
 p/lkPJWOHegIQMWtGwRyGmG1qzil7b/QBNAPLgu9pF4TA+ySRBEB2BOr2jRSkj6N
 mNTHQbSYxBoktdt+VhtrSsxR+i8lwlegx+RNRFmKK3VH5da2nfiBaOY7zBQQHxCK
 yxQvXvsljSVpfkFKLc/S2nLQL1zTkRfFKV1Xmd3+3owR+EoqM60=
 =NpMX
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic mmu-context cleanup from Arnd Bergmann:
 "This is a cleanup series from Nicholas Piggin, preparing for later
  changes. The asm/mmu_context.h header are generalized and common code
  moved to asm-gneneric/mmu_context.h.

  This saves a bit of code and makes it easier to change in the future"

* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
  h8300: Fix generic mmu_context build
  m68k: mmu_context: Fix Sun-3 build
  xtensa: use asm-generic/mmu_context.h for no-op implementations
  x86: use asm-generic/mmu_context.h for no-op implementations
  um: use asm-generic/mmu_context.h for no-op implementations
  sparc: use asm-generic/mmu_context.h for no-op implementations
  sh: use asm-generic/mmu_context.h for no-op implementations
  s390: use asm-generic/mmu_context.h for no-op implementations
  riscv: use asm-generic/mmu_context.h for no-op implementations
  powerpc: use asm-generic/mmu_context.h for no-op implementations
  parisc: use asm-generic/mmu_context.h for no-op implementations
  openrisc: use asm-generic/mmu_context.h for no-op implementations
  nios2: use asm-generic/mmu_context.h for no-op implementations
  nds32: use asm-generic/mmu_context.h for no-op implementations
  mips: use asm-generic/mmu_context.h for no-op implementations
  microblaze: use asm-generic/mmu_context.h for no-op implementations
  m68k: use asm-generic/mmu_context.h for no-op implementations
  ia64: use asm-generic/mmu_context.h for no-op implementations
  hexagon: use asm-generic/mmu_context.h for no-op implementations
  csky: use asm-generic/mmu_context.h for no-op implementations
  ...
2020-12-15 23:58:04 -08:00
Linus Torvalds
3db1a3fa98 Staging / IIO driver patches for 5.11-rc1
Here is the big staging and IIO driver pull request for 5.11-rc1
 
 Lots of different things in here:
   - loads of driver updates
   - so many coding style cleanups
   - new IIO drivers
   - Android ION code is finally removed from the tree
   - wimax drivers are moved to staging on their way out of the kernel
 
 Nothing really exciting, just the constant grind of kernel development :)
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iCdw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn44QCguVCsIkhxYmnuTAkrPQP74CbJoJwAoLVoPM5K
 LJRbMYjGfRc4gZehlrIV
 =clR4
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 5.11-rc1

  Lots of different things in here:

   - loads of driver updates

   - so many coding style cleanups

   - new IIO drivers

   - Android ION code is finally removed from the tree

   - wimax drivers are moved to staging on their way out of the kernel

  Nothing really exciting, just the constant grind of kernel development :)

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
  staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe()
  staging: most: Fix spelling mistake "tranceiver" -> "transceiver"
  staging: qlge: remove duplicate word in comment
  staging: comedi: mf6x4: Fix AI end-of-conversion detection
  staging: greybus: Add TODO item about modernizing the pwm code
  pinctrl: ralink: add a pinctrl driver for the rt2880 family
  dt-bindings: pinctrl: rt2880: add binding document
  staging: rtl8723bs: remove ELEMENT_ID enum
  staging: rtl8723bs: remove unused macros
  staging: rtl8723bs: replace EID_EXTCapability
  staging: rtl8723bs: replace EID_BSSIntolerantChlReport
  staging: rtl8723bs: replace EID_BSSCoexistence
  staging: rtl8723bs: replace _MME_IE_
  staging: rtl8723bs: replace _WAPI_IE_
  staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_
  staging: rtl8723bs: replace _ERPINFO_IE_
  staging: rtl8723bs: replace _CHLGETXT_IE_
  staging: rtl8723bs: replace _COUNTRY_IE_
  staging: rtl8723bs: replace _IBSS_PARA_IE_
  staging: rtl8723bs: replace _TIM_IE_
  ...
2020-12-15 14:18:40 -08:00
Linus Torvalds
0cee54c890 USB / Thunderbolt patches for 5.11-rc1
Here is the big USB and thunderbolt pull request for 5.11-rc1.
 
 Nothing major in here, just the grind of constant development to support
 new hardware and fix old issues:
   - thunderbolt updates for new USB4 hardware
   - cdns3 major driver updates
   - lots of typec updates and additions as more hardware is available
   - usb serial driver updates and fixes
   - other tiny USB driver updates
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iKFQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yme2gCfacEYztlnc0fh7PyyatYXgdkspbYAn2ri6mfF
 4VY86HYXKqQRDW8w/lSg
 =f8KJ
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big USB and thunderbolt pull request for 5.11-rc1.

  Nothing major in here, just the grind of constant development to
  support new hardware and fix old issues:

   - thunderbolt updates for new USB4 hardware

   - cdns3 major driver updates

   - lots of typec updates and additions as more hardware is available

   - usb serial driver updates and fixes

   - other tiny USB driver updates

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: phy: convert comma to semicolon
  usb: ucsi: convert comma to semicolon
  usb: typec: tcpm: convert comma to semicolon
  usb: typec: tcpm: Update vbus_vsafe0v on init
  usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
  usb: typec: Add class for plug alt mode device
  USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
  USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
  USB: typec: tcpm: Fix PR_SWAP error handling
  USB: typec: tcpm: Hard Reset after not receiving a Request
  USB: gadget: f_fs: remove likely/unlikely
  usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
  USB: gadget: f_midi: setup SuperSpeed Plus descriptors
  USB: gadget: f_acm: add support for SuperSpeed Plus
  USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
  usb: typec: intel_pmc_mux: Configure cable generation value for USB4
  MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
  usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
  usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
  usb: cdns3: fix NULL pointer dereference on no platform data
  ...
2020-12-15 13:54:56 -08:00
Linus Torvalds
d635a69dd4 Networking updates for 5.11
Core:
 
  - support "prefer busy polling" NAPI operation mode, where we defer softirq
    for some time expecting applications to periodically busy poll
 
  - AF_XDP: improve efficiency by more batching and hindering
            the adjacency cache prefetcher
 
  - af_packet: make packet_fanout.arr size configurable up to 64K
 
  - tcp: optimize TCP zero copy receive in presence of partial or unaligned
         reads making zero copy a performance win for much smaller messages
 
  - XDP: add bulk APIs for returning / freeing frames
 
  - sched: support fragmenting IP packets as they come out of conntrack
 
  - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
 
 BPF:
 
  - BPF switch from crude rlimit-based to memcg-based memory accounting
 
  - BPF type format information for kernel modules and related tracing
    enhancements
 
  - BPF implement task local storage for BPF LSM
 
  - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
 
 Protocols:
 
  - mptcp: improve multiple xmit streams support, memory accounting and
           many smaller improvements
 
  - TLS: support CHACHA20-POLY1305 cipher
 
  - seg6: add support for SRv6 End.DT4/DT6 behavior
 
  - sctp: Implement RFC 6951: UDP Encapsulation of SCTP
 
  - ppp_generic: add ability to bridge channels directly
 
  - bridge: Connectivity Fault Management (CFM) support as is defined in
            IEEE 802.1Q section 12.14.
 
 Drivers:
 
  - mlx5: make use of the new auxiliary bus to organize the driver internals
 
  - mlx5: more accurate port TX timestamping support
 
  - mlxsw:
    - improve the efficiency of offloaded next hop updates by using
      the new nexthop object API
    - support blackhole nexthops
    - support IEEE 802.1ad (Q-in-Q) bridging
 
  - rtw88: major bluetooth co-existance improvements
 
  - iwlwifi: support new 6 GHz frequency band
 
  - ath11k: Fast Initial Link Setup (FILS)
 
  - mt7915: dual band concurrent (DBDC) support
 
  - net: ipa: add basic support for IPA v4.5
 
 Refactor:
 
  - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
 
  - phy: add support for shared interrupts; get rid of multiple driver
         APIs and have the drivers write a full IRQ handler, slight growth
 	of driver code should be compensated by the simpler API which
 	also allows shared IRQs
 
  - add common code for handling netdev per-cpu counters
 
  - move TX packet re-allocation from Ethernet switch tag drivers to
    a central place
 
  - improve efficiency and rename nla_strlcpy
 
  - number of W=1 warning cleanups as we now catch those in a patchwork
    build bot
 
 Old code removal:
 
  - wan: delete the DLCI / SDLA drivers
 
  - wimax: move to staging
 
  - wifi: remove old WDS wifi bridging support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/YXmUACgkQMUZtbf5S
 IrvSQBAAgOrt4EFopEvVqlTHZbqI45IEqgtXS+YWmlgnjZCgshyMj8q1yK1zzane
 qYxr/NNJ9kV3FdtaynmmHPgEEEfR5kJ/D3B2BsxYDkaDDrD0vbNsBGw+L+/Gbhxl
 N/5l/9FjLyLY1D+EErknuwR5XGuQ6BSDVaKQMhYOiK2hgdnAAI4hszo8Chf6wdD0
 XDBslQ7vpD/05r+eMj0IkS5dSAoGOIFXUxhJ5dqrDbRHiKsIyWqA3PLbYemfAhxI
 s2XckjfmSgGE3FKL8PSFu+EcfHbJQQjLcULJUnqgVcdwEEtRuE9ggEi52nZRXMWM
 4e8sQJAR9Fx7pZy0G1xfS149j6iPU5LjRlU9TNSpVABz14Vvvo3gEL6gyIdsz+xh
 hMN7UBdp0FEaP028CXoIYpaBesvQqj0BSndmee8qsYAtN6j+QKcM2AOSr7JN1uMH
 C/86EDoGAATiEQIVWJvnX5MPmlAoblyLA+RuVhmxkIBx2InGXkFmWqRkXT5l4jtk
 LVl8/TArR4alSQqLXictXCjYlCm9j5N4zFFtEVasSYi7/ZoPfgRNWT+lJ2R8Y+Zv
 +htzGaFuyj6RJTVeFQMrkl3whAtBamo2a0kwg45NnxmmXcspN6kJX1WOIy82+MhD
 Yht7uplSs7MGKA78q/CDU0XBeGjpABUvmplUQBIfrR/jKLW2730=
 =GXs1
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...
2020-12-15 13:22:29 -08:00
Linus Torvalds
ac73e3dc8a Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few random little subsystems

 - almost all of the MM patches which are staged ahead of linux-next
   material. I'll trickle to post-linux-next work in as the dependents
   get merged up.

Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
  mm: cleanup kstrto*() usage
  mm: fix fall-through warnings for Clang
  mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
  mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
  mm:backing-dev: use sysfs_emit in macro defining functions
  mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
  mm: use sysfs_emit for struct kobject * uses
  mm: fix kernel-doc markups
  zram: break the strict dependency from lzo
  zram: add stat to gather incompressible pages since zram set up
  zram: support page writeback
  mm/process_vm_access: remove redundant initialization of iov_r
  mm/zsmalloc.c: rework the list_add code in insert_zspage()
  mm/zswap: move to use crypto_acomp API for hardware acceleration
  mm/zswap: fix passing zero to 'PTR_ERR' warning
  mm/zswap: make struct kernel_param_ops definitions const
  userfaultfd/selftests: hint the test runner on required privilege
  userfaultfd/selftests: fix retval check for userfaultfd_open()
  userfaultfd/selftests: always dump something in modes
  userfaultfd: selftests: make __{s,u}64 format specifiers portable
  ...
2020-12-15 12:53:37 -08:00
Dmitry Safonov
871402e05b mm: forbid splitting special mappings
Don't allow splitting of vm_special_mapping's.  It affects vdso/vvar
areas.  Uprobes have only one page in xol_area so they aren't affected.

Those restrictions were enforced by checks in .mremap() callbacks.
Restrict resizing with generic .split() callback.

Link: https://lkml.kernel.org/r/20201013013416.390574-7-dima@arista.com
Signed-off-by: Dmitry Safonov <dima@arista.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:41 -08:00
Linus Torvalds
edd7ab7684 The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic implementation
     which builds the base for the kmap_local() API and make the
     kmap_atomic() interface wrappers which handle the disabling/enabling of
     preemption and pagefaults.
 
   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.
 
   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a mapping
     is established. It has to disable migration instead to guarantee that
     the virtual address of the mapped slot is the same accross preemption.
 
   - Provide better debug facilities: guard pages and enforced utilization
     of the mapping mechanics on 64bit systems when the architecture allows
     it.
 
   - Provide the new kmap_local() API which can now be used to cleanup the
     kmap_atomic() usage sites all over the place. Most of the usage sites
     do not require the implicit disabling of preemption and pagefaults so
     the penalty on 64bit and 32bit non-highmem systems is removed and quite
     some of the code can be simplified. A wholesale conversion is not
     possible because some usage depends on the implicit side effects and
     some need to be cleaned up because they work around these side effects.
 
     The migrate disable side effect is only effective on highmem systems
     and when enforced debugging is enabled. On 64bit and 32bit non-highmem
     systems the overhead is completely avoided.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi
 0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT
 4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP
 p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF
 RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH
 +x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR
 ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V
 Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz
 XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj
 FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO
 HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+
 +jlfoJhMbtx5Gg==
 =n71I
 -----END PGP SIGNATURE-----

Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull kmap updates from Thomas Gleixner:
 "The new preemtible kmap_local() implementation:

   - Consolidate all kmap_atomic() internals into a generic
     implementation which builds the base for the kmap_local() API and
     make the kmap_atomic() interface wrappers which handle the
     disabling/enabling of preemption and pagefaults.

   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.

   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a
     mapping is established. It has to disable migration instead to
     guarantee that the virtual address of the mapped slot is the same
     across preemption.

   - Provide better debug facilities: guard pages and enforced
     utilization of the mapping mechanics on 64bit systems when the
     architecture allows it.

   - Provide the new kmap_local() API which can now be used to cleanup
     the kmap_atomic() usage sites all over the place. Most of the usage
     sites do not require the implicit disabling of preemption and
     pagefaults so the penalty on 64bit and 32bit non-highmem systems is
     removed and quite some of the code can be simplified. A wholesale
     conversion is not possible because some usage depends on the
     implicit side effects and some need to be cleaned up because they
     work around these side effects.

     The migrate disable side effect is only effective on highmem
     systems and when enforced debugging is enabled. On 64bit and 32bit
     non-highmem systems the overhead is completely avoided"

* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  ARM: highmem: Fix cache_is_vivt() reference
  x86/crashdump/32: Simplify copy_oldmem_page()
  io-mapping: Provide iomap_local variant
  mm/highmem: Provide kmap_local*
  sched: highmem: Store local kmaps in task struct
  x86: Support kmap_local() forced debugging
  mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
  mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
  microblaze/mm/highmem: Add dropped #ifdef back
  xtensa/mm/highmem: Make generic kmap_atomic() work correctly
  mm/highmem: Take kmap_high_get() properly into account
  highmem: High implementation details and document API
  Documentation/io-mapping: Remove outdated blurb
  io-mapping: Cleanup atomic iomap
  mm/highmem: Remove the old kmap_atomic cruft
  highmem: Get rid of kmap_types.h
  xtensa/mm/highmem: Switch to generic kmap atomic
  sparc/mm/highmem: Switch to generic kmap atomic
  powerpc/mm/highmem: Switch to generic kmap atomic
  nds32/mm/highmem: Switch to generic kmap atomic
  ...
2020-12-14 18:35:53 -08:00
Linus Torvalds
adb35e8dc9 Scheduler updates:
- migrate_disable/enable() support which originates from the RT tree and
    is now a prerequisite for the new preemptible kmap_local() API which aims
    to replace kmap_atomic().
 
  - A fair amount of topology and NUMA related improvements
 
  - Improvements for the frequency invariant calculations
 
  - Enhanced robustness for the global CPU priority tracking and decision
    making
 
  - The usual small fixes and enhancements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XwK4THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoX28D/9cVrvziSQGfBfuQWnUiw8iOIq1QBa2
 Me+Tvenhfrlt7xU6rbP9ciFu7eTN+fS06m5uQPGI+t22WuJmHzbmw1bJVXfkvYfI
 /QoU+Hg7DkDAn1p7ZKXh0dRkV0nI9ixxSHl0E+Zf1ATBxCUMV2SO85flg6z/4qJq
 3VWUye0dmR7/bhtkIjv5rwce9v2JB2g1AbgYXYTW9lHVoUdGoMSdiZAF4tGyHLnx
 sJ6DMqQ+k+dmPyYO0z5MTzjW/fXit4n9w2e3z9TvRH/uBu58WSW1RBmQYX6aHBAg
 dhT9F4lvTs6lJY23x5RSFWDOv6xAvKF5a0xfb8UZcyH5EoLYrPRvm42a0BbjdeRa
 u0z7LbwIlKA+RFdZzFZWz8UvvO0ljyMjmiuqZnZ5dY9Cd80LSBuxrWeQYG0qg6lR
 Y2povhhCepEG+q8AXIe2YjHKWKKC1s/l/VY3CNnCzcd21JPQjQ4Z5eWGmHif5IED
 CntaeFFhZadR3w02tkX35zFmY3w4soKKrbI4EKWrQwd+cIEQlOSY7dEPI/b5BbYj
 MWAb3P4EG9N77AWTNmbhK4nN0brEYb+rBbCA+5dtNBVhHTxAC7OTWElJOC2O66FI
 e06dREjvwYtOkRUkUguWwErbIai2gJ2MH0VILV3hHoh64oRk7jjM8PZYnjQkdptQ
 Gsq0rJW5iiu/OQ==
 =Oz1V
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Thomas Gleixner:

 - migrate_disable/enable() support which originates from the RT tree
   and is now a prerequisite for the new preemptible kmap_local() API
   which aims to replace kmap_atomic().

 - A fair amount of topology and NUMA related improvements

 - Improvements for the frequency invariant calculations

 - Enhanced robustness for the global CPU priority tracking and decision
   making

 - The usual small fixes and enhancements all over the place

* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
  sched/fair: Trivial correction of the newidle_balance() comment
  sched/fair: Clear SMT siblings after determining the core is not idle
  sched: Fix kernel-doc markup
  x86: Print ratio freq_max/freq_base used in frequency invariance calculations
  x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
  x86, sched: Calculate frequency invariance for AMD systems
  irq_work: Optimize irq_work_single()
  smp: Cleanup smp_call_function*()
  irq_work: Cleanup
  sched: Limit the amount of NUMA imbalance that can exist at fork time
  sched/numa: Allow a floating imbalance between NUMA nodes
  sched: Avoid unnecessary calculation of load imbalance at clone time
  sched/numa: Rename nr_running and break out the magic number
  sched: Make migrate_disable/enable() independent of RT
  sched/topology: Condition EAS enablement on FIE support
  arm64: Rebuild sched domains on invariance status changes
  sched/topology,schedutil: Wrap sched domains rebuild
  sched/uclamp: Allow to reset a task uclamp constraint value
  sched/core: Fix typos in comments
  Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
  ...
2020-12-14 18:29:11 -08:00
Linus Torvalds
0ca2ce81eb arm64 updates for 5.11:
- Expose tag address bits in siginfo. The original arm64 ABI did not
   expose any of the bits 63:56 of a tagged address in siginfo. In the
   presence of user ASAN or MTE, this information may be useful. The
   implementation is generic to other architectures supporting tags (like
   SPARC ADI, subject to wiring up the arch code). The user will have to
   opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra bits, if
   available, become visible in si_addr.
 
 - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
   lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
   detriment of other platforms. With these changes, the kernel scans the
   Device Tree dma-ranges and the ACPI IORT information before deciding
   on a smaller ZONE_DMA.
 
 - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
   with LTO, there is an increased risk of the compiler converting an
   address dependency headed by a READ_ONCE() invocation into a control
   dependency and consequently allowing for harmful reordering by the
   CPU.
 
 - Add CPPC FFH support using arm64 AMU counters.
 
 - set_fs() removal on arm64. This renders the User Access Override (UAO)
   ARMv8 feature unnecessary.
 
 - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
   identifier file for SMMUv3, stop event counters support for i.MX8MP,
   enable the perf events-based hard lockup detector.
 
 - Reorganise the kernel VA space slightly so that 52-bit VA
   configurations can use more virtual address space.
 
 - Improve the robustness of the arm64 memory offline event notifier.
 
 - Pad the Image header to 64K following the EFI header definition
   updated recently to increase the section alignment to 64K.
 
 - Support CONFIG_CMDLINE_EXTEND on arm64.
 
 - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
   bits for PtrAuth.
 
 - Switch to vmapped shadow call stacks.
 
 - Miscellaneous clean-ups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl/XcSgACgkQa9axLQDI
 XvGkwg//SLknimELD/cphf2UzZm5RFuCU0x1UnIXs9XYo5BrOpgVLLA//+XkCrKN
 0GLAdtBDfw1axWJudzgMBiHrv6wSGh4p3YWjLIW06u/PJu3m3U8oiiolvvF8d7Yq
 UKDseKGQnQkrl97J0SyA+Da/u8D11GEzp52SWL5iRxzt6vInEC27iTOp9n1yoaoP
 f3y7qdp9kv831ryUM3rXFYpc8YuMWXk+JpBSNaxqmjlvjMzipA5PhzBLmNzfc657
 XcrRX5qsgjEeJW8UUnWUVNB42j7tVzN77yraoUpoVVCzZZeWOQxqq5EscKPfIhRt
 AjtSIQNOs95ZVE0SFCTjXnUUb823coUs4dMCdftqlE62JNRwdR+3bkfa+QjPTg1F
 O9ohW1AzX0/JB19QBxMaOgbheB8GFXh3DVJ6pizTgxJgyPvQQtFuEhT1kq8Cst0U
 Pe+pEWsg9t41bUXNz+/l9tUWKWpeCfFNMTrBXLmXrNlTLeOvDh/0UiF0+2lYJYgf
 YAboibQ5eOv2wGCcSDEbNMJ6B2/6GtubDJxH4du680F6Emb6pCSw0ntPwB7mSGLG
 5dXz+9FJxDLjmxw7BXxQgc5MoYIrt5JQtaOQ6UxU8dPy53/+py4Ck6tXNkz0+Ap7
 gPPaGGy1GqobQFu3qlHtOK1VleQi/sWcrpmPHrpiiFUf6N7EmcY=
 =zXFk
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Expose tag address bits in siginfo. The original arm64 ABI did not
   expose any of the bits 63:56 of a tagged address in siginfo. In the
   presence of user ASAN or MTE, this information may be useful. The
   implementation is generic to other architectures supporting tags
   (like SPARC ADI, subject to wiring up the arch code). The user will
   have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
   bits, if available, become visible in si_addr.

 - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
   lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
   detriment of other platforms. With these changes, the kernel scans
   the Device Tree dma-ranges and the ACPI IORT information before
   deciding on a smaller ZONE_DMA.

 - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
   with LTO, there is an increased risk of the compiler converting an
   address dependency headed by a READ_ONCE() invocation into a control
   dependency and consequently allowing for harmful reordering by the
   CPU.

 - Add CPPC FFH support using arm64 AMU counters.

 - set_fs() removal on arm64. This renders the User Access Override
   (UAO) ARMv8 feature unnecessary.

 - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
   identifier file for SMMUv3, stop event counters support for i.MX8MP,
   enable the perf events-based hard lockup detector.

 - Reorganise the kernel VA space slightly so that 52-bit VA
   configurations can use more virtual address space.

 - Improve the robustness of the arm64 memory offline event notifier.

 - Pad the Image header to 64K following the EFI header definition
   updated recently to increase the section alignment to 64K.

 - Support CONFIG_CMDLINE_EXTEND on arm64.

 - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
   bits for PtrAuth.

 - Switch to vmapped shadow call stacks.

 - Miscellaneous clean-ups.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
  perf/imx_ddr: Add system PMU identifier for userspace
  bindings: perf: imx-ddr: add compatible string
  arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
  arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
  arm64: mark __system_matches_cap as __maybe_unused
  arm64: uaccess: remove vestigal UAO support
  arm64: uaccess: remove redundant PAN toggling
  arm64: uaccess: remove addr_limit_user_check()
  arm64: uaccess: remove set_fs()
  arm64: uaccess cleanup macro naming
  arm64: uaccess: split user/kernel routines
  arm64: uaccess: refactor __{get,put}_user
  arm64: uaccess: simplify __copy_user_flushcache()
  arm64: uaccess: rename privileged uaccess routines
  arm64: sdei: explicitly simulate PAN/UAO entry
  arm64: sdei: move uaccess logic to arch/arm64/
  arm64: head.S: always initialize PSTATE
  arm64: head.S: cleanup SCTLR_ELx initialization
  arm64: head.S: rename el2_setup -> init_kernel_el
  arm64: add C wrappers for SET_PSTATE_*()
  ...
2020-12-14 16:24:30 -08:00
Linus Torvalds
9e4b0d55d8 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Add speed testing on 1420-byte blocks for networking

  Algorithms:
   - Improve performance of chacha on ARM for network packets
   - Improve performance of aegis128 on ARM for network packets

  Drivers:
   - Add support for Keem Bay OCS AES/SM4
   - Add support for QAT 4xxx devices
   - Enable crypto-engine retry mechanism in caam
   - Enable support for crypto engine on sdm845 in qce
   - Add HiSilicon PRNG driver support"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
  crypto: qat - add capability detection logic in qat_4xxx
  crypto: qat - add AES-XTS support for QAT GEN4 devices
  crypto: qat - add AES-CTR support for QAT GEN4 devices
  crypto: atmel-i2c - select CONFIG_BITREVERSE
  crypto: hisilicon/trng - replace atomic_add_return()
  crypto: keembay - Add support for Keem Bay OCS AES/SM4
  dt-bindings: Add Keem Bay OCS AES bindings
  crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
  crypto: seed - remove trailing semicolon in macro definition
  crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: cpt - Fix sparse warnings in cptpf
  hwrng: ks-sa - Add dependency on IOMEM and OF
  crypto: lib/blake2s - Move selftest prototype into header file
  crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
  crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
  crypto: ccree - rework cache parameters handling
  crypto: cavium - Use dma_set_mask_and_coherent to simplify code
  crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
  ...
2020-12-14 12:18:19 -08:00
Greg Kroah-Hartman
007e337080 USB-serial updates for 5.11-rc1
Here are the USB-serial updates for 5.11-rc1, including:
 
  - keyspan_pda write-implementation fixes
  - digi_acceleport write-wakeup fix
  - mos7720 parport-restore fix
  - mos7720 parport-tasklet removal
  - cp210x termios-handling cleanups
  - option device-flag fix
  - ftdi_sio GPIO CBUS-configuration improvements
  - removal of in_interrupt() uses
 
 Included are also various clean ups.
 
 All have been in linux-next with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCX9OIiQAKCRALxc3C7H1l
 CA1OAQCZVi5abi2R/+Rr3V9/iYOA/VJXJ6Mxg8xDbt3GWmp0lQD9G4z0Ws4f1RY1
 ACEcOBNQedpoxXa/o3eb8tlAjObwAwg=
 =udri
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for 5.11-rc1

Here are the USB-serial updates for 5.11-rc1, including:

 - keyspan_pda write-implementation fixes
 - digi_acceleport write-wakeup fix
 - mos7720 parport-restore fix
 - mos7720 parport-tasklet removal
 - cp210x termios-handling cleanups
 - option device-flag fix
 - ftdi_sio GPIO CBUS-configuration improvements
 - removal of in_interrupt() uses

Included are also various clean ups.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits)
  USB: serial: ftdi_sio: log the CBUS GPIO validity
  USB: serial: ftdi_sio: drop GPIO line checking dead code
  USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib
  USB: serial: option: add interface-number sanity check to flag handling
  USB: serial: cp210x: clean up dtr_rts()
  USB: serial: cp210x: refactor flow-control handling
  USB: serial: cp210x: drop flow-control debugging
  USB: serial: cp210x: set terminal settings on open
  USB: serial: cp210x: clean up line-control handling
  USB: serial: cp210x: return early on unchanged termios
  USB: serial: mos7720: defer state restore to a workqueue
  USB: serial: mos7720: fix parallel-port state restore
  USB: serial: remove write wait queue
  USB: serial: digi_acceleport: fix write-wakeup deadlocks
  USB: serial: keyspan_pda: drop redundant usb-serial pointer
  USB: serial: keyspan_pda: use BIT() macro
  USB: serial: keyspan_pda: clean up comments and whitespace
  USB: serial: keyspan_pda: clean up xircom/entrega support
  USB: serial: keyspan_pda: add write-fifo support
  USB: serial: keyspan_pda: increase transmitter threshold
  ...
2020-12-11 16:16:52 +01:00
Jakub Kicinski
a1dd1d8697 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-12-03

The main changes are:

1) Support BTF in kernel modules, from Andrii.

2) Introduce preferred busy-polling, from Björn.

3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.

4) Memcg-based memory accounting for bpf objects, from Roman.

5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
  selftests/bpf: Fix invalid use of strncat in test_sockmap
  libbpf: Use memcpy instead of strncpy to please GCC
  selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
  selftests/bpf: Add tp_btf CO-RE reloc test for modules
  libbpf: Support attachment of BPF tracing programs to kernel modules
  libbpf: Factor out low-level BPF program loading helper
  bpf: Allow to specify kernel module BTFs when attaching BPF programs
  bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
  selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
  selftests/bpf: Add support for marking sub-tests as skipped
  selftests/bpf: Add bpf_testmod kernel module for testing
  libbpf: Add kernel module BTF support for CO-RE relocations
  libbpf: Refactor CO-RE relocs to not assume a single BTF object
  libbpf: Add internal helper to load BTF data by FD
  bpf: Keep module's btf_data_size intact after load
  bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
  selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
  bpf: Adds support for setting window clamp
  samples/bpf: Fix spelling mistake "recieving" -> "receiving"
  bpf: Fix cold build of test_progs-no_alu32
  ...
====================

Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 07:48:12 -08:00
Jakub Kicinski
55fd59b003 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts:
	drivers/net/ethernet/ibm/ibmvnic.c

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03 15:44:09 -08:00
Björn Töpel
7c951cafc0 net: Add SO_BUSY_POLL_BUDGET socket option
This option lets a user set a per socket NAPI budget for
busy-polling. If the options is not set, it will use the default of 8.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com
2020-12-01 00:09:25 +01:00
Björn Töpel
7fd3253a7d net: Introduce preferred busy-polling
The existing busy-polling mode, enabled by the SO_BUSY_POLL socket
option or system-wide using the /proc/sys/net/core/busy_read knob, is
an opportunistic. That means that if the NAPI context is not
scheduled, it will poll it. If, after busy-polling, the budget is
exceeded the busy-polling logic will schedule the NAPI onto the
regular softirq handling.

One implication of the behavior above is that a busy/heavy loaded NAPI
context will never enter/allow for busy-polling. Some applications
prefer that most NAPI processing would be done by busy-polling.

This series adds a new socket option, SO_PREFER_BUSY_POLL, that works
in concert with the napi_defer_hard_irqs and gro_flush_timeout
knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were
introduced in commit 6f8b12d661 ("net: napi: add hard irqs deferral
feature"), and allows for a user to defer interrupts to be enabled and
instead schedule the NAPI context from a watchdog timer. When a user
enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled,
and the NAPI context is being processed by a softirq, the softirq NAPI
processing will exit early to allow the busy-polling to be performed.

If the application stops performing busy-polling via a system call,
the watchdog timer defined by gro_flush_timeout will timeout, and
regular softirq handling will resume.

In summary; Heavy traffic applications that prefer busy-polling over
softirq processing should use this option.

Example usage:

  $ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs
  $ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout

Note that the timeout should be larger than the userspace processing
window, otherwise the watchdog will timeout and fall back to regular
softirq processing.

Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com
2020-12-01 00:09:25 +01:00
Linus Torvalds
f91a3aa6bc Yet two more places which invoke tracing from RCU disabled regions in the
idle path. Similar to the entry path the low level idle functions have to
 be non-instrumentable.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/DpAUTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXSLD/9klc0YimnEnROW6Q5Svb2IcyIutmXF
 bOIY1bYYoKILOBj3wyvDUhmdMuq5zh7H9yG11hO8MaVVWVQcLcOMLdHTYm9dcdmF
 xQk33+xqjuhRShB+nEmC9ayYtWogtH6W6uZ6WDtF9ZltMKU85n5ddGJ/Fvo+HoCb
 NbOdHGJdJ3/3ZCeHnxOnxM+5/GwjkBuccTV/tXmb3yXrfU9DBySyQ4/UchcpF43w
 LcEb0kiQbpZsBTByKJOQV8+RR654S0sILlvRwVXpmj94vrgGwhlVk1/9rz7tkOhF
 ksoo1mTVu75LMt22G/hXxE63787yRvFdHjapf0+kCOAuhl992NK+xlGDH8o9DXcu
 9y73D4bI0HnDFs20w6vs20iLvxECJiYHJqlgR5ZwFUToceaNgtiYr8kzuD7Zbae1
 KG2E7BuNSwHWMtf97fGn44GZknPEOaKdDn4Wv6/bvKHxLm77qe11RKF70Stcz2AI
 am13KmQzzsHGF5qNWwpElRUxSdxfJMR66RnOdTQULGrRedaZTFol/y2pnVzTSe3k
 SZnlpL5kE7y92UYDogPb5wWA7b+YkJN0OdSkRFy1FH26ZG8E4M7ZJ2tql5Sw7pGM
 lsTjXpAUphnK5rz7QcYE8KAZWj//fIAcElIrvdklVcBnS3IqjfksYW27B64133vx
 cT1B/lA1PHXj6Q==
 =raED
 -----END PGP SIGNATURE-----

Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Two more places which invoke tracing from RCU disabled regions in the
  idle path.

  Similar to the entry path the low level idle functions have to be
  non-instrumentable"

* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  intel_idle: Fix intel_idle() vs tracing
  sched/idle: Fix arch_cpu_idle() vs tracing
2020-11-29 11:19:26 -08:00
Jakub Kicinski
5c39f26e67 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.

Conflicts:
	drivers/net/can/usb/gs_usb.c

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27 18:25:27 -08:00
Linus Torvalds
c84e1efae0 asm-generic: add correct MAX_POSSIBLE_PHYSMEM_BITS setting
This is a single bugfix for a bug that Stefan Agner found on 32-bit
 Arm, but that exists on several other architectures.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/BZx4ACgkQmmx57+YA
 GNnSPA/9HK0dwaGuXHRxKpt2ShHt5kOmixlmRJszYmuSIJde945EJNTP/+2l2Qs2
 TDXmOU8pdZSAZX2EHLLEksNsnhUoTBWzsn4WxHRTNVc2cYuHHA6PKMdAPV136ag/
 U0gnC7eCYKCDM3A1A/G4437PDI3vfm0Wzo6Biikxwhi861bshxjVs3DapDQw5+Zn
 bOS8CCNpmwpDC26ZAfIY8es32Hg063GhdJXQ01uqkaZLJdRn7ui6bkv18vi+b3gM
 QLeaubDT4+oH+HpJJpFZ01iugBFah5iJtg/JtWyap/LJSkelyjU9Gr7qrrpI7M3t
 hfDzk7fRjHO1XPn2bDc4InWJEoekE9vde5M0QKn3ID8dFO1M5tNqov2uH40m4fQD
 UM7irWe0BmP9Nms5LV7dMWChPn8FUEr34ZYAwF9B+YPL1Ec6GGn8mA/E0Iz8pre0
 MUgv5LZ8LYdeYvSSpXrgBkgv2pwni5rTc7/K9KtvGdkLQ3rOuihPBbPyR0YTYa8f
 UkboIky80lcx/uyhhu+OxWxe0q+Ug8WF87UkPIDDhsaF9W2DoErIwiCQhqS+AKs4
 9DiCBzLgF6mZ11ijK73DtLNBmQnKdssV9Bs5lnOO0XqYdoqiQ5gRJWrixvI0OWSa
 WGt66UV481rV/Oxlt1A/1lynYkZU0b121fFFB/EPbuFuUwZu9So=
 =xgYa
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
 "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.

  This is a single bugfix for a bug that Stefan Agner found on 32-bit
  Arm, but that exists on several other architectures"

* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
2020-11-27 15:00:35 -08:00
Ingo Molnar
a787bdaff8 Merge branch 'linus' into sched/core, to resolve semantic conflict
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-27 11:10:50 +01:00
Herbert Xu
7c2f5537ca crypto: mips/octeon - Fix sparse endianness warnings
This patch fixes a number of endianness warnings in the mips/octeon
code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27 17:13:41 +11:00
Peter Zijlstra
545b8c8df4 smp: Cleanup smp_call_function*()
Get rid of the __call_single_node union and cleanup the API a little
to avoid external code relying on the structure layout as much.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-11-24 16:47:49 +01:00
Peter Zijlstra
58c644ba51 sched/idle: Fix arch_cpu_idle() vs tracing
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.

Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.

(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)

Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
2020-11-24 16:47:35 +01:00
Peter Collingbourne
1d82b7898f arch: move SA_* definitions to generic headers
Most architectures with the exception of alpha, mips, parisc and
sparc use the same values for these flags. Move their definitions into
asm-generic/signal-defs.h and allow the architectures with non-standard
values to override them. Also, document the non-standard flag values
in order to make it easier to add new generic flags in the future.

A consequence of this change is that on powerpc and x86, the constants'
values aside from SA_RESETHAND change signedness from unsigned
to signed. This is not expected to impact realistic use of these
constants. In particular the typical use of the constants where they
are or'ed together and assigned to sa_flags (or another int variable)
would not be affected.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528
Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-11-23 10:31:05 -06:00
Greg Kroah-Hartman
03c1136af5 Linux 5.10-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+69egeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGTSYH/ifRBlaxy5UiHFc0
 2zdR7pkjWrYfDTTT3sazIAhdlzzcfnkUqgFxOP45F4ZIqeTzunH3sUY+5UlT9IX7
 liUgnLxQ/1R9Gx8kPGQfu+tLCey78xVFydGsqJoW9sPRw2R+apMdGGa/lOrk+OXz
 DXIN+dDnGFqwCCNJpK+rxQQhFf++IPpSI8z6Y23moOFhsDZrEziHuVFy2FGyRM6z
 prZ/us/tcobE8ptCk1RmOxLoJ1DR6UxpA2vLimTE+JD8siOsSWPbjE0KudnWCnd5
 BLqIjrsPJbSxyuzzK3v9dnO5wMv7tMDuMIuYM/MQTXDttNwtsqt/aP6gdnUCym7N
 5eHEj5g=
 =MuO1
 -----END PGP SIGNATURE-----

Merge 5.10-rc5 into staging-testing

We want the staging/IIO fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-23 08:21:37 +01:00
Eric Biggers
a24d22b225 crypto: sha - split sha.h into sha1.h and sha2.h
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.

This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure.  So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.

Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.

This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1.  It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20 14:45:33 +11:00
Jakub Kicinski
56495a2442 Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19 19:08:46 -08:00
Xie He
f73659192b net: wan: Delete the DLCI / SDLA drivers
The DLCI driver (dlci.c) implements the Frame Relay protocol. However,
we already have another newer and better implementation of Frame Relay
provided by the HDLC_FR driver (hdlc_fr.c).

The DLCI driver's implementation of Frame Relay is used by only one
hardware driver in the kernel - the SDLA driver (sdla.c).

The SDLA driver provides Frame Relay support for the Sangoma S50x devices.
However, the vendor provides their own driver (along with their own
multi-WAN-protocol implementations including Frame Relay), called WANPIPE.
I believe most users of the hardware would use the vendor-provided WANPIPE
driver instead.

(The WANPIPE driver was even once in the kernel, but was deleted in
commit 8db60bcf30 ("[WAN]: Remove broken and unmaintained Sangoma
drivers.") because the vendor no longer updated the in-kernel WANPIPE
driver.)

Cc: Mike McLagan <mike.mclagan@linux.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17 13:33:29 -08:00
Zhang Qilong
ac3b57adf8 MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu
If the clk_register fails, we should free h before
function returns to prevent memleak.

Fixes: 474402291a ("MIPS: Alchemy: clock framework integration of onchip clocks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-11-17 12:53:57 +01:00
Thomas Bogendoerfer
61a2f1aecf MIPS: kernel: Fix for_each_memblock conversion
The loop over all memblocks works with PFNs and not physical
addresses, so we need for_each_mem_pfn_range().

Fixes: b10d6bca87 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2020-11-17 10:31:31 +01:00
Arnd Bergmann
cef3970381 arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.

I looked up the possible number of bits in source code and
datasheets, here is what I found:

 - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
 - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
   support more than 32 bits, even though supersections in theory allow
   up to 40 bits as well.
 - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
   XPA supports up to 60 bits in theory, but 40 bits are more than
   anyone will ever ship
 - On PowerPC, there are three different implementations of 36 bit
   addressing, but 32-bit is used without CONFIG_PTE_64BIT
 - On RISC-V, the normal page table format can support 34 bit
   addressing. There is no highmem support on RISC-V, so anything
   above 2GB is unused, but it might be useful to eventually support
   CONFIG_ZRAM for high pages.

Fixes: 61989a80fb ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a9 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16 16:57:18 +01:00
Roman Kiryanov
c869eaa617 drivers: staging: retire drivers/staging/goldfish
Android Studio Emulator (goldfish) migrated
to Intel HDA.

Signed-off-by: Roman Kiryanov <rkir@google.com>
Link: https://lore.kernel.org/r/20201112234907.3761694-1-rkir@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13 15:51:29 +01:00
Xie He
f8ae7bbec7 net: x25_asy: Delete the x25_asy driver
This driver transports LAPB (X.25 link layer) frames over TTY links.

I can safely say that this driver has no actual user because it was
not working at all until:
commit 8fdcabeac3 ("drivers/net/wan/x25_asy: Fix to make it work")

The code in its current state still has problems:

1.
The uses of "struct x25_asy" in x25_asy_unesc (when receiving) and in
x25_asy_write_wakeup (when sending) are not protected by locks against
x25_asy_change_mtu's changing of the transmitting/receiving buffers.
Also, all "netif_running" checks in this driver are not protected by
locks against the ndo_stop function.

2.
The driver stops all TTY read/write when the netif is down.
I think this is not right because this may cause the last outgoing frame
before the netif goes down to be incompletely transmitted, and the first
incoming frame after the netif goes up to be incompletely received.

And there may also be other problems.

I was planning to fix these problems but after recent discussions about
deleting other old networking code, I think we may just delete this
driver, too.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20201105073434.429307-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07 14:13:44 -08:00
Thomas Gleixner
a4c33e83bc mips/mm/highmem: Switch to generic kmap atomic
No reason having the same code in every architecture

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201103095857.885321106@linutronix.de
2020-11-06 23:14:56 +01:00
Johan Hovold
7604ce70b8 USB: serial: keyspan_pda: clean up xircom/entrega support
Drop the separate Kconfig symbol for Xircom / Entrega and always include
support in the keyspan_pda driver.

Note that all configs that enabled CONFIG_USB_SERIAL_XIRCOM also enable
CONFIG_USB_SERIAL_KEYSPAN_PDA.

Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-04 11:01:49 +01:00
Arnd Bergmann
0774a6ed29 timekeeping: default GENERIC_CLOCKEVENTS to enabled
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.

Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.

For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.

At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:

   text	   data	    bss	    dec	    hex	filename
3861936	1092236	 196656	5150828	 4e986c	obj-m68k/vmlinux-no-clockevent
3866201	1093832	 196184	5156217	 4ead79	obj-m68k/vmlinux-clockevent

On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30 21:57:07 +01:00
Nicholas Piggin
5b3a582d94 mips: use asm-generic/mmu_context.h for no-op implementations
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-27 16:02:36 +01:00
Randy Dunlap
31b4d8e172 MIPS: export has_transparent_hugepage() for modules
MIPS should export its local version of "has_transparent_hugepage"
so that loadable modules (dax) can use it.

Fixes this build error:
ERROR: modpost: "has_transparent_hugepage" [drivers/dax/dax.ko] undefined!

Fixes: fd8cfd3000 ("arch: fix has_transparent_hugepage()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: linux-nvdimm@lists.01.org
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-27 12:44:34 +01:00
Joe Perches
33def8498f treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25 14:51:49 -07:00
Linus Torvalds
2e368dd2bb ARM: SoC-related driver updates
Various driver updates for platforms. A bulk of this is smaller fixes or
 cleanups, but some of the new material this time around is:
 
  - Support for Nvidia Tegra234 SoC
  - Ring accelerator support for TI AM65x
  - PRUSS driver for TI platforms
  - Renesas support for R-Car V3U SoC
  - Reset support for Cortex-M4 processor on i.MX8MQ
 
 There are also new socinfo entries for a handful of different SoCs
 and platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TUboPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3T4YP/R5pjF2C1gt8FrCaG4IfhIY1VHWelfPcB5qB
 RC7Pn4MCRCEY+10YPXA70oS6KBaC+gtZ4bPeInzfLXh1ynFJJb+XtAIxoRhnkEw+
 /R979wNcIls9JqkvnHWFx29Y008W2ZNcXVNKH7O2Gxy+eKzDcTMsoH/zj8xWrV5b
 +eBllTzGU4RArYRJdcwOBQwMO6L2pzADHZ7hGMAY//8fo+qrxg8b9EINsH1UHCa8
 gQdWdVlmv6GeLB6RYLRBCWxpW4jOLDqEAvyDV84QQmYHvzD9tqJExNR0hfGTs4TU
 TZWK7LWSNqF0ujQUbFh9Ikcx6DypU1gvE7LKhCDrf4D7HLRX5v4BjGH+xtVtjsyD
 xzh4WEoa3qCNu1mxQjKG8Y6U7bB9cRI2TPVxbbmI4ZuF0njvybecwwOZUBQl4aD4
 5x+Df3pO/E5ECLOBeTnLgvw20fcjHv4HP8l63B6ADb31FUiZrJXItvayY5qXWe+P
 HSgUykmVA4nd4PnLsSj9seyWqOTIqUZ3U3TsmfxIQh2Otie01okwuHb1J7ErO/u0
 W148SgSwVbnkPxjbBHKGgC2r+Q/AjSDGRBYL0ThIVFUztxTBBwhj3FIvMnyyxTIj
 yFBY14KQ8FcNUs8DrbPCaAx/RDCB02IHdvvIlyTmU3RBq7UhJVIglpLzzo2ed9F2
 5u/aVH3y
 =tfPb
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...
2020-10-24 10:39:22 -07:00
Linus Torvalds
f9a705ad1c ARM:
- New page table code for both hypervisor and guest stage-2
 - Introduction of a new EL2-private host context
 - Allow EL2 to have its own private per-CPU variables
 - Support of PMU event filtering
 - Complete rework of the Spectre mitigation
 
 PPC:
 - Fix for running nested guests with in-kernel IRQ chip
 - Fix race condition causing occasional host hard lockup
 - Minor cleanups and bugfixes
 
 x86:
 - allow trapping unknown MSRs to userspace
 - allow userspace to force #GP on specific MSRs
 - INVPCID support on AMD
 - nested AMD cleanup, on demand allocation of nested SVM state
 - hide PV MSRs and hypercalls for features not enabled in CPUID
 - new test for MSR_IA32_TSC writes from host and guest
 - cleanups: MMU, CPUID, shared MSRs
 - LAPIC latency optimizations ad bugfixes
 
 For x86, also included in this pull request is a new alternative and
 (in the future) more scalable implementation of extended page tables
 that does not need a reverse map from guest physical addresses to
 host physical addresses.  For now it is disabled by default because
 it is still lacking a few of the existing MMU's bells and whistles.
 However it is a very solid piece of work and it is already available
 for people to hammer on it.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
 Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
 tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
 Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
 STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
 qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
 =AD6a
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "For x86, there is a new alternative and (in the future) more scalable
  implementation of extended page tables that does not need a reverse
  map from guest physical addresses to host physical addresses.

  For now it is disabled by default because it is still lacking a few of
  the existing MMU's bells and whistles. However it is a very solid
  piece of work and it is already available for people to hammer on it.

  Other updates:

  ARM:
   - New page table code for both hypervisor and guest stage-2
   - Introduction of a new EL2-private host context
   - Allow EL2 to have its own private per-CPU variables
   - Support of PMU event filtering
   - Complete rework of the Spectre mitigation

  PPC:
   - Fix for running nested guests with in-kernel IRQ chip
   - Fix race condition causing occasional host hard lockup
   - Minor cleanups and bugfixes

  x86:
   - allow trapping unknown MSRs to userspace
   - allow userspace to force #GP on specific MSRs
   - INVPCID support on AMD
   - nested AMD cleanup, on demand allocation of nested SVM state
   - hide PV MSRs and hypercalls for features not enabled in CPUID
   - new test for MSR_IA32_TSC writes from host and guest
   - cleanups: MMU, CPUID, shared MSRs
   - LAPIC latency optimizations ad bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
  kvm: x86/mmu: NX largepage recovery for TDP MMU
  kvm: x86/mmu: Don't clear write flooding count for direct roots
  kvm: x86/mmu: Support MMIO in the TDP MMU
  kvm: x86/mmu: Support write protection for nesting in tdp MMU
  kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
  kvm: x86/mmu: Support dirty logging for the TDP MMU
  kvm: x86/mmu: Support changed pte notifier in tdp MMU
  kvm: x86/mmu: Add access tracking for tdp_mmu
  kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
  kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
  kvm: x86/mmu: Add TDP MMU PF handler
  kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
  kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
  KVM: Cache as_id in kvm_memory_slot
  kvm: x86/mmu: Add functions to handle changed TDP SPTEs
  kvm: x86/mmu: Allocate and free TDP MMU roots
  kvm: x86/mmu: Init / Uninit the TDP MMU
  kvm: x86/mmu: Introduce tdp_iter
  KVM: mmu: extract spte.h and spte.c
  KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
  ...
2020-10-23 11:17:56 -07:00
Linus Torvalds
4a22709e21 arch-cleanup-2020-10-22
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+SOXIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgptrcD/93VUDmRAn73ChKNd0TtXUicJlAlNLVjvfs
 VFTXWBDnlJnGkZT7ElkDD9b8dsz8l4xGf/QZ5dzhC/th2OsfObQkSTfe0lv5cCQO
 mX7CRSrDpjaHtW+WGPDa0oQsGgIfpqUz2IOg9NKbZZ1LJ2uzYfdOcf3oyRgwZJ9B
 I3sh1vP6OzjZVVCMmtMTM+sYZEsDoNwhZwpkpiwMmj8tYtOPgKCYKpqCiXrGU0x2
 ML5FtDIwiwU+O3zYYdCBWqvCb2Db0iA9Aov2whEBz/V2jnmrN5RMA/90UOh1E2zG
 br4wM1Wt3hNrtj5qSxZGlF/HEMYJVB8Z2SgMjYu4vQz09qRVVqpGdT/dNvLAHQWg
 w4xNCj071kVZDQdfwnqeWSKYUau9Xskvi8xhTT+WX8a5CsbVrM9vGslnS5XNeZ6p
 h2D3Q+TAYTvT756icTl0qsYVP7PrPY7DdmQYu0q+Lc3jdGI+jyxO2h9OFBRLZ3p6
 zFX2N8wkvvCCzP2DwVnnhIi/GovpSh7ksHnb039F36Y/IhZPqV1bGqdNQVdanv6I
 8fcIDM6ltRQ7dO2Br5f1tKUZE9Pm6x60b/uRVjhfVh65uTEKyGRhcm5j9ztzvQfI
 cCBg4rbVRNKolxuDEkjsAFXVoiiEEsb7pLf4pMO+Dr62wxFG589tQNySySneUIVZ
 J9ILnGAAeQ==
 =aVWo
 -----END PGP SIGNATURE-----

Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block

Pull arch task_work cleanups from Jens Axboe:
 "Two cleanups that don't fit other categories:

   - Finally get the task_work_add() cleanup done properly, so we don't
     have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
     all callers, and also fixes up the documentation for
     task_work_add().

   - While working on some TIF related changes for 5.11, this
     TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
     duplication for how that is handled"

* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
  task_work: cleanup notification modes
  tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
2020-10-23 10:06:38 -07:00
Linus Torvalds
746b25b1aa Kbuild updates for v5.10
- Support 'make compile_commands.json' to generate the compilation
    database more easily, avoiding stale entries
 
  - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
    using clang-tidy
 
  - Preprocess scripts/modules.lds.S to allow CONFIG options in the module
    linker script
 
  - Drop cc-option tests from compiler flags supported by our minimal
    GCC/Clang versions
 
  - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
 
  - Use sha1 build id for both BFD linker and LLD
 
  - Improve deb-pkg for reproducible builds and rootless builds
 
  - Remove stale, useless scripts/namespace.pl
 
  - Turn -Wreturn-type warning into error
 
  - Fix build error of deb-pkg when CONFIG_MODULES=n
 
  - Replace 'hostname' command with more portable 'uname -n'
 
  - Various Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl+RfS0VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGG1QP/2hzoMzK1YXErPUhGrhYU1rxz7Nu
 HkLTIkyKF1HPwSJf5XyNW/FTBI4SDlkNoVg/weEDCS1yFxxpvQLIck8ChzA1kIIM
 P+1IfBWOTzqn91XsapU2zwSno3gylphVchVIvYAB3oLUotGeMSluy1cQtBRzyA5D
 rj2Q7H8fzkzk3YoBcBC/BOKDlfo/usqQ1X/gsfRFwN/BJxeZSYoujNBE7KtHaDsd
 8K/ggBIqmST4NBn+M8c11d8CxzvWbtG1gq3EkUL5nG8T13DsGn1EFC0SPt85bkvv
 f9YywfJi37HixhZzK6tXYjN/PWoiEY6z90mhd0NtZghQT7kQMiTQ3sWrM8dX3ssf
 phBzO94uFQDjhyxOaSSsCoI/TIciAPo4+G8PNjcaEtj63IEfhEz/dnlstYwY5Y9P
 Pp3aZtVjSGJwGW2u2EUYj6paFVqjf6DXQjQKPNHnsYCEidIvFTjjguRGvx9gl6mx
 yd8oseOsAtOEf0alRe9MMdvN17O3UrRAxgBdap7fktg02TLVRGxZIbuwKmBf29ho
 ORl9zeFkYBn6XQFyuItJoXy/kYFyHDaBEPYCRQcY4dwqcjZIiAc/FhYbqYthJ59L
 5vLN2etmDIVSuUv1J5nBqHHGCqJChykbqg7riQ651dCNKw4gZB8ctCay2lXhBXMg
 1mqOcoG5WWL7//F+
 =tZRN
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Support 'make compile_commands.json' to generate the compilation
   database more easily, avoiding stale entries

 - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
   using clang-tidy

 - Preprocess scripts/modules.lds.S to allow CONFIG options in the
   module linker script

 - Drop cc-option tests from compiler flags supported by our minimal
   GCC/Clang versions

 - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y

 - Use sha1 build id for both BFD linker and LLD

 - Improve deb-pkg for reproducible builds and rootless builds

 - Remove stale, useless scripts/namespace.pl

 - Turn -Wreturn-type warning into error

 - Fix build error of deb-pkg when CONFIG_MODULES=n

 - Replace 'hostname' command with more portable 'uname -n'

 - Various Makefile cleanups

* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: Use uname for LINUX_COMPILE_HOST detection
  kbuild: Only add -fno-var-tracking-assignments for old GCC versions
  kbuild: remove leftover comment for filechk utility
  treewide: remove DISABLE_LTO
  kbuild: deb-pkg: clean up package name variables
  kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
  kbuild: enforce -Werror=return-type
  scripts: remove namespace.pl
  builddeb: Add support for all required debian/rules targets
  builddeb: Enable rootless builds
  builddeb: Pass -n to gzip for reproducible packages
  kbuild: split the build log of kallsyms
  kbuild: explicitly specify the build id style
  scripts/setlocalversion: make git describe output more reliable
  kbuild: remove cc-option test of -Werror=date-time
  kbuild: remove cc-option test of -fno-stack-check
  kbuild: remove cc-option test of -fno-strict-overflow
  kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
  kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
  kbuild: do not create built-in objects for external module builds
  ...
2020-10-22 13:13:57 -07:00
Linus Torvalds
f56e65dff6 Merge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull initial set_fs() removal from Al Viro:
 "Christoph's set_fs base series + fixups"

* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Allow a NULL pos pointer to __kernel_read
  fs: Allow a NULL pos pointer to __kernel_write
  powerpc: remove address space overrides using set_fs()
  powerpc: use non-set_fs based maccess routines
  x86: remove address space overrides using set_fs()
  x86: make TASK_SIZE_MAX usable from assembly code
  x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
  lkdtm: remove set_fs-based tests
  test_bitmap: remove user bitmap tests
  uaccess: add infrastructure for kernel builds with set_fs()
  fs: don't allow splice read/write without explicit ops
  fs: don't allow kernel reads and writes without iter ops
  sysctl: Convert to iter interfaces
  proc: add a read_iter method to proc proc_ops
  proc: cleanup the compat vs no compat file ops
  proc: remove a level of indentation in proc_get_inode
2020-10-22 09:59:21 -07:00
Minchan Kim
ecb8ac8b1f mm/madvise: introduce process_madvise() syscall: an external memory hinting API
There is usecase that System Management Software(SMS) want to give a
memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the
case of Android, it is the ActivityManagerService.

The information required to make the reclaim decision is not known to the
app.  Instead, it is known to the centralized userspace
daemon(ActivityManagerService), and that daemon must be able to initiate
reclaim on its own without any app involvement.

To solve the issue, this patch introduces a new syscall
process_madvise(2).  It uses pidfd of an external process to give the
hint.  It also supports vector address range because Android app has
thousands of vmas due to zygote so it's totally waste of CPU and power if
we should call the syscall one by one for each vma.(With testing 2000-vma
syscall vs 1-vector syscall, it showed 15% performance improvement.  I
think it would be bigger in real practice because the testing ran very
cache friendly environment).

Another potential use case for the vector range is to amortize the cost
ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could
benefit users like TCP receive zerocopy and malloc implementations.  In
future, we could find more usecases for other advises so let's make it
happens as API since we introduce a new syscall at this moment.  With
that, existing madvise(2) user could replace it with process_madvise(2)
with their own pid if they want to have batch address ranges support
feature.

ince it could affect other process's address range, only privileged
process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same
UID) gives it the right to ptrace the process could use it successfully.
The flag argument is reserved for future use if we need to extend the API.

I think supporting all hints madvise has/will supported/support to
process_madvise is rather risky.  Because we are not sure all hints make
sense from external process and implementation for the hint may rely on
the caller being in the current context so it could be error-prone.  Thus,
I just limited hints as MADV_[COLD|PAGEOUT] in this patch.

If someone want to add other hints, we could hear the usecase and review
it for each hint.  It's safer for maintenance rather than introducing a
buggy syscall but hard to fix it later.

So finally, the API is as follows,

      ssize_t process_madvise(int pidfd, const struct iovec *iovec,
                unsigned long vlen, int advice, unsigned int flags);

    DESCRIPTION
      The process_madvise() system call is used to give advice or directions
      to the kernel about the address ranges from external process as well as
      local process. It provides the advice to address ranges of process
      described by iovec and vlen. The goal of such advice is to improve
      system or application performance.

      The pidfd selects the process referred to by the PID file descriptor
      specified in pidfd. (See pidofd_open(2) for further information)

      The pointer iovec points to an array of iovec structures, defined in
      <sys/uio.h> as:

        struct iovec {
            void *iov_base;         /* starting address */
            size_t iov_len;         /* number of bytes to be advised */
        };

      The iovec describes address ranges beginning at address(iov_base)
      and with size length of bytes(iov_len).

      The vlen represents the number of elements in iovec.

      The advice is indicated in the advice argument, which is one of the
      following at this moment if the target process specified by pidfd is
      external.

        MADV_COLD
        MADV_PAGEOUT

      Permission to provide a hint to external process is governed by a
      ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2).

      The process_madvise supports every advice madvise(2) has if target
      process is in same thread group with calling process so user could
      use process_madvise(2) to extend existing madvise(2) to support
      vector address ranges.

    RETURN VALUE
      On success, process_madvise() returns the number of bytes advised.
      This return value may be less than the total number of requested
      bytes, if an error occurred. The caller should check return value
      to determine whether a partial advice occurred.

FAQ:

Q.1 - Why does any external entity have better knowledge?

Quote from Sandeep

"For Android, every application (including the special SystemServer)
are forked from Zygote.  The reason of course is to share as many
libraries and classes between the two as possible to benefit from the
preloading during boot.

After applications start, (almost) all of the APIs end up calling into
this SystemServer process over IPC (binder) and back to the
application.

In a fully running system, the SystemServer monitors every single
process periodically to calculate their PSS / RSS and also decides
which process is "important" to the user for interactivity.

So, because of how these processes start _and_ the fact that the
SystemServer is looping to monitor each process, it does tend to *know*
which address range of the application is not used / useful.

Besides, we can never rely on applications to clean things up
themselves.  We've had the "hey app1, the system is low on memory,
please trim your memory usage down" notifications for a long time[1].
They rely on applications honoring the broadcasts and very few do.

So, if we want to avoid the inevitable killing of the application and
restarting it, some way to be able to tell the OS about unimportant
memory in these applications will be useful.

- ssp

Q.2 - How to guarantee the race(i.e., object validation) between when
giving a hint from an external process and get the hint from the target
process?

process_madvise operates on the target process's address space as it
exists at the instant that process_madvise is called.  If the space
target process can run between the time the process_madvise process
inspects the target process address space and the time that
process_madvise is actually called, process_madvise may operate on
memory regions that the calling process does not expect.  It's the
responsibility of the process calling process_madvise to close this
race condition.  For example, the calling process can suspend the
target process with ptrace, SIGSTOP, or the freezer cgroup so that it
doesn't have an opportunity to change its own address space before
process_madvise is called.  Another option is to operate on memory
regions that the caller knows a priori will be unchanged in the target
process.  Yet another option is to accept the race for certain
process_madvise calls after reasoning that mistargeting will do no
harm.  The suggested API itself does not provide synchronization.  It
also apply other APIs like move_pages, process_vm_write.

The race isn't really a problem though.  Why is it so wrong to require
that callers do their own synchronization in some manner?  Nobody
objects to write(2) merely because it's possible for two processes to
open the same file and clobber each other's writes --- instead, we tell
people to use flock or something.  Think about mmap.  It never
guarantees newly allocated address space is still valid when the user
tries to access it because other threads could unmap the memory right
before.  That's where we need synchronization by using other API or
design from userside.  It shouldn't be part of API itself.  If someone
needs more fine-grained synchronization rather than process level,
there were two ideas suggested - cookie[2] and anon-fd[3].  Both are
applicable via using last reserved argument of the API but I don't
think it's necessary right now since we have already ways to prevent
the race so don't want to add additional complexity with more
fine-grained optimization model.

To make the API extend, it reserved an unsigned long as last argument
so we could support it in future if someone really needs it.

Q.3 - Why doesn't ptrace work?

Injecting an madvise in the target process using ptrace would not work
for us because such injected madvise would have to be executed by the
target process, which means that process would have to be runnable and
that creates the risk of the abovementioned race and hinting a wrong
VMA.  Furthermore, we want to act the hint in caller's context, not the
callee's, because the callee is usually limited in cpuset/cgroups or
even freezed state so they can't act by themselves quick enough, which
causes more thrashing/kill.  It doesn't work if the target process are
ptraced(e.g., strace, debugger, minidump) because a process can have at
most one ptracer.

[1] https://developer.android.com/topic/performance/memory"

[2] process_getinfo for getting the cookie which is updated whenever
    vma of process address layout are changed - Daniel Colascione -
    https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224

[3] anonymous fd which is used for the object(i.e., address range)
    validation - Michal Hocko -
    https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/

[minchan@kernel.org: fix process_madvise build break for arm64]
  Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com
[minchan@kernel.org: fix build error for mips of process_madvise]
  Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com
[akpm@linux-foundation.org: fix patch ordering issue]
[akpm@linux-foundation.org: fix arm64 whoops]
[minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian]
[akpm@linux-foundation.org: fix i386 build]
[sfr@canb.auug.org.au: fix syscall numbering]
  Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au
[sfr@canb.auug.org.au: madvise.c needs compat.h]
  Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au
[minchan@kernel.org: fix mips build]
  Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com
[yuehaibing@huawei.com: remove duplicate header which is included twice]
  Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com
[minchan@kernel.org: do not use helper functions for process_madvise]
  Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com
[akpm@linux-foundation.org: pidfd_get_pid() gained an argument]
[sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"]
  Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.au

Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com
Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-18 09:27:10 -07:00
Jens Axboe
3c532798ec tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
All the callers currently do this, clean it up and move the clearing
into tracehook_notify_resume() instead.

Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-17 15:04:36 -06:00
Linus Torvalds
09a31a7e37 MIPS updates for v5.10:
- removed support for PNX833x alias NXT_STB22x
 - included Ingenic SoC support into generic MIPS kernels
 - added support for new Ingenic SoCs
 - converted workaround selection to use Kconfig
 - replaced old boot mem functions by memblock_*
 - enabled COP2 usage in kernel for Loongson64 to make usage
   of usage of 16byte load/stores possible
 - cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl+Jk/MaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDjyA/9EAEb8woPRsEfbQE8GLgT
 vW2y2/fSHFJHoYY/t9+G81lJVKsg9TXQ9LyNk3WSU6+a6qELVqmnHY7+e43rSkfG
 qaxMRJOmwsMU7NWQOy1OSyESHidsAXrGYMY40TKrcClyVbS/Ob6wZ5QbBp+MTEsU
 ane8Yq/QTS60xIxsS0SZSiQpqzumUn7oHAwCAlqcqo26tV94mtrtsFG4pReqI2gh
 Bxs2ZoQYdx1/rPGXHV74fwP3Iz1Rwq3Z38FCyK7ME98cTEiLxYs1/ztgL1y0IC07
 F3Dv3wmPtCGZtNyqDJxs7lHsbi74owSyoueywNeOA+YV8IzkOCEW0XpgL7vI2gPL
 OIi+LbH7MXt3P14h5ekzK+dSILg3yNFD152PmGxpUVzVhfDCw+uyUHzHdhZSCF/J
 aldlDm1wtUV5PacruVbH26amownTsfdei+WTtgGN3QAISmnLjUghsplPZE6KWbGW
 uPPpuIA2pTwW2FQdXL/WwGZm1k44ii5zX1Cjc55AZISZOzFXqklbuEZbMEM5O76N
 EFR+zOd4+wueOZOI7vpBTmKSSY/r12Ve25hbMMYeY0G3bbsubcIIIHHRxhdPp/+R
 8t+PTC9//bT9r/OKdGV6TDsSJmSZWfaaNd30actDHpss8ruUlNxwWv7awp/z0sOs
 U+R5CAaVvzQlhxkzdO+M03w=
 =Aa/Q
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - removed support for PNX833x alias NXT_STB22x

 - included Ingenic SoC support into generic MIPS kernels

 - added support for new Ingenic SoCs

 - converted workaround selection to use Kconfig

 - replaced old boot mem functions by memblock_*

 - enabled COP2 usage in kernel for Loongson64 to make use
   of 16byte load/stores possible

 - cleanups and fixes

* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
  MIPS: DEC: Restore bootmem reservation for firmware working memory area
  MIPS: dec: fix section mismatch
  bcm963xx_tag.h: fix duplicated word
  mips: ralink: enable zboot support
  MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
  MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
  MIPS: cpu-probe: introduce exclusive R3k CPU probe
  MIPS: cpu-probe: move fpu probing/handling into its own file
  MIPS: replace add_memory_region with memblock
  MIPS: Loongson64: Clean up numa.c
  MIPS: Loongson64: Select SMP in Kconfig to avoid build error
  mips: octeon: Add Ubiquiti E200 and E220 boards
  MIPS: SGI-IP28: disable use of ll/sc in kernel
  MIPS: tx49xx: move tx4939_add_memory_regions into only user
  MIPS: pgtable: Remove used PAGE_USERIO define
  MIPS: alchemy: Share prom_init implementation
  MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
  MIPS: process: include exec.h header in process.c
  MIPS: process: Add prototype for function arch_dup_task_struct
  MIPS: idle: Add prototype for function check_wait
  ...
2020-10-16 12:40:55 -07:00
Linus Torvalds
9ff9b0d392 networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...
2020-10-15 18:42:13 -07:00
Linus Torvalds
5a32c3413d dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
  - move private definitions out of <linux/dma-mapping.h>
  - lower CMA_ALIGNMENT (Paul Cercueil)
  - remove the omap1 dma address translation in favor of the common
    code
  - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
  - support per-node DMA CMA areas (Barry Song)
  - increase the default seg boundary limit (Nicolin Chen)
  - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
  - various cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw
 286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD
 8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey
 FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA
 gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76
 mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF
 vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI
 6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI
 D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B
 gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi
 JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg
 7fM=
 =Bkf/
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - rework the non-coherent DMA allocator

 - move private definitions out of <linux/dma-mapping.h>

 - lower CMA_ALIGNMENT (Paul Cercueil)

 - remove the omap1 dma address translation in favor of the common code

 - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)

 - support per-node DMA CMA areas (Barry Song)

 - increase the default seg boundary limit (Nicolin Chen)

 - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)

 - various cleanups

* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
  ARM/ixp4xx: add a missing include of dma-map-ops.h
  dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
  dma-direct: factor out a dma_direct_alloc_from_pool helper
  dma-direct check for highmem pages in dma_direct_alloc_pages
  dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
  dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
  dma-mapping: move dma-debug.h to kernel/dma/
  dma-mapping: remove <asm/dma-contiguous.h>
  dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
  dma-contiguous: remove dma_contiguous_set_default
  dma-contiguous: remove dev_set_cma_area
  dma-contiguous: remove dma_declare_contiguous
  dma-mapping: split <linux/dma-mapping.h>
  cma: decrease CMA_ALIGNMENT lower limit to 2
  firewire-ohci: use dma_alloc_pages
  dma-iommu: implement ->alloc_noncoherent
  dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
  dma-mapping: add a new dma_alloc_pages API
  dma-mapping: remove dma_cache_sync
  53c700: convert to dma_alloc_noncoherent
  ...
2020-10-15 14:43:29 -07:00
Maciej W. Rozycki
cf3af0a4d3 MIPS: DEC: Restore bootmem reservation for firmware working memory area
Fix a crash on DEC platforms starting with:

VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing unused PROM memory: 124k freed
BUG: Bad page state in process swapper  pfn:00001
page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1
Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124
        80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30
        00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348
        2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000
        80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000
        ...
Call Trace:
[<8004bc5c>] show_stack+0x34/0x104
[<8015675c>] bad_page+0xfc/0x128
[<80157714>] free_pcppages_bulk+0x1f4/0x5dc
[<801591cc>] free_unref_page+0xc0/0x130
[<8015cb04>] free_reserved_area+0x144/0x1d8
[<805abd78>] kernel_init+0x20/0x100
[<80046070>] ret_from_kernel_thread+0x14/0x1c
Disabling lock debugging due to kernel taint

caused by an attempt to free bootmem space that as from
commit b93ddc4f91 ("mips: Reserve memory for the kernel image resources")
has not been anymore reserved due to the removal of generic MIPS arch code
that used to reserve all the memory from the beginning of RAM up to the
kernel load address.

This memory does need to be reserved on DEC platforms however as it is
used by REX firmware as working area, as per the TURBOchannel firmware
specification[1]:

Table 2-2  REX Memory Regions
-------------------------------------------------------------------------
        Starting        Ending
Region  Address         Address         Use
-------------------------------------------------------------------------
0       0xa0000000      0xa000ffff      Restart block, exception vectors,
                                        REX stack and bss
1       0xa0010000      0xa0017fff      Keyboard or tty drivers

2       0xa0018000      0xa001f3ff 1)   CRT driver

3       0xa0020000      0xa002ffff      boot, cnfg, init and t objects

4       0xa0020000      0xa002ffff      64KB scratch space
-------------------------------------------------------------------------
1) Note that the last 3 Kbytes of region 2 are reserved for backward
compatibility with previous system software.
-------------------------------------------------------------------------

(this table uses KSEG2 unmapped virtual addresses, which in the MIPS
architecture are offset from physical addresses by a fixed value of
0xa0000000 and therefore the regions referred do correspond to the
beginning of the physical address space) and we call into the firmware
on several occasions throughout the bootstrap process.  It is believed
that pre-REX firmware used with non-TURBOchannel DEC platforms has the
same requirements, as hinted by note #1 cited.

Recreate the discarded reservation then, in DEC platform code, removing
the crash.

References:

[1] "TURBOchannel Firmware Specification", On-line version,
    EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993,
    Chapter 2 "System Module Firmware", p. 2-5

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: b93ddc4f91 ("mips: Reserve memory for the kernel image resources")
Cc: stable@vger.kernel.org # v5.2+

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-14 23:57:57 +02:00