4493 Commits

Author SHA1 Message Date
Paul E. McKenney
a60a574600 security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
This commit replaces the use of rcu_swap_protected() with the more
intuitively appealing rcu_replace_pointer() as a step towards removing
rcu_swap_protected().

Link: https://lore.kernel.org/lkml/CAHk-=wiAsJLw1egFEE=Z7-GGtM6wcvtyytXZA1+BHqta4gg6Hw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Reported-by: kbuild test robot <lkp@intel.com>
[ paulmck: From rcu_replace() to rcu_replace_pointer() per Ingo Molnar. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Micah Morton <mortonm@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: <linux-security-module@vger.kernel.org>
2019-10-30 08:45:57 -07:00
Christopher M. Riedl
69393cb03c powerpc/xmon: Restrict when kernel is locked down
Xmon should be either fully or partially disabled depending on the
kernel lockdown state.

Put xmon into read-only mode for lockdown=integrity and prevent user
entry into xmon when lockdown=confidentiality. Xmon checks the lockdown
state on every attempted entry:

 (1) during early xmon'ing

 (2) when triggered via sysrq

 (3) when toggled via debugfs

 (4) when triggered via a previously enabled breakpoint

The following lockdown state transitions are handled:

 (1) lockdown=none -> lockdown=integrity
     set xmon read-only mode

 (2) lockdown=none -> lockdown=confidentiality
     clear all breakpoints, set xmon read-only mode,
     prevent user re-entry into xmon

 (3) lockdown=integrity -> lockdown=confidentiality
     clear all breakpoints, set xmon read-only mode,
     prevent user re-entry into xmon

Suggested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
2019-10-28 21:54:15 +11:00
Dave Airlie
3275a71e76 Merge tag 'drm-next-5.5-2019-10-09' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.5-2019-10-09:

amdgpu:
- Additional RAS enablement for vega20
- RAS page retirement and bad page storage in EEPROM
- No GPU reset with unrecoverable RAS errors
- Reserve vram for page tables rather than trying to evict
- Fix issues with GPU reset and xgmi hives
- DC i2c over aux fixes
- Direct submission for clears, PTE/PDE updates
- Improvements to help support recoverable GPU page faults
- Silence harmless SAD block messages
- Clean up code for creating a bo at a fixed location
- Initial DC HDCP support
- Lots of documentation fixes
- GPU reset for renoir
- Add IH clockgating support for soc15 asics
- Powerplay improvements
- DC MST cleanups
- Add support for MSI-X
- Misc cleanups and bug fixes

amdkfd:
- Query KFD device info by asic type rather than pci ids
- Add navi14 support
- Add renoir support
- Add navi12 support
- gfx10 trap handler improvements
- pasid cleanups
- Check against device cgroup

ttm:
- Return -EBUSY with pipelining with no_gpu_wait

radeon:
- Silence harmless SAD block messages

device_cgroup:
- Export devcgroup_check_permission

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010041713.3412-1-alexander.deucher@amd.com
2019-10-26 05:56:57 +10:00
David Howells
d055b4fb4d pipe: Reduce #inclusion of pipe_fs_i.h
Remove some #inclusions of linux/pipe_fs_i.h that don't seem to be
necessary any more.

Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-23 17:02:34 +01:00
David S. Miller
2f184393e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Several cases of overlapping changes which were for the most
part trivially resolvable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20 10:43:00 -07:00
Joel Fernandes (Google)
da97e18458 perf_event: Add support for LSM and SELinux checks
In current mainline, the degree of access to perf_event_open(2) system
call depends on the perf_event_paranoid sysctl.  This has a number of
limitations:

1. The sysctl is only a single value. Many types of accesses are controlled
   based on the single value thus making the control very limited and
   coarse grained.
2. The sysctl is global, so if the sysctl is changed, then that means
   all processes get access to perf_event_open(2) opening the door to
   security issues.

This patch adds LSM and SELinux access checking which will be used in
Android to access perf_event_open(2) for the purposes of attaching BPF
programs to tracepoints, perf profiling and other operations from
userspace. These operations are intended for production systems.

5 new LSM hooks are added:
1. perf_event_open: This controls access during the perf_event_open(2)
   syscall itself. The hook is called from all the places that the
   perf_event_paranoid sysctl is checked to keep it consistent with the
   systctl. The hook gets passed a 'type' argument which controls CPU,
   kernel and tracepoint accesses (in this context, CPU, kernel and
   tracepoint have the same semantics as the perf_event_paranoid sysctl).
   Additionally, I added an 'open' type which is similar to
   perf_event_paranoid sysctl == 3 patch carried in Android and several other
   distros but was rejected in mainline [1] in 2016.

2. perf_event_alloc: This allocates a new security object for the event
   which stores the current SID within the event. It will be useful when
   the perf event's FD is passed through IPC to another process which may
   try to read the FD. Appropriate security checks will limit access.

3. perf_event_free: Called when the event is closed.

4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event.

5. perf_event_write: Called from the ioctl(2) syscalls for the event.

[1] https://lwn.net/Articles/696240/

Since Peter had suggest LSM hooks in 2016 [1], I am adding his
Suggested-by tag below.

To use this patch, we set the perf_event_paranoid sysctl to -1 and then
apply selinux checking as appropriate (default deny everything, and then
add policy rules to give access to domains that need it). In the future
we can remove the perf_event_paranoid sysctl altogether.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: rostedt@goodmis.org
Cc: Yonghong Song <yhs@fb.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: jeffv@google.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: primiano@google.com
Cc: Song Liu <songliubraving@fb.com>
Cc: rsavitski@google.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Matthew Garrett <matthewgarrett@google.com>
Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-10-17 21:31:55 +02:00
Linus Torvalds
2ef459167a selinux/stable-5.4 PR 20191007
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl2bu6kUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMsxhAAtoljww3Xur0JpD7y+g2yzKGZqn9F
 ovqH103NOdpXY3vRN5TL0ZfKEWZz/a2Rjyjz/9+Ix5kKFQuaguk9TVenp4LuAWjy
 yyo8aSArqwJEpPbrgQDRkjvq08zCcsHSQHwyR44L5MEB8w03Hr+GKFbroR7DkB8R
 qthF5nRoarblEpdc88s3WbPN/Yz32zRwl3EppSRriIBSBUNr6OP5yO6YDvBdwJso
 CvmQybMK/iGiZrDzm5jAXzUyI79MHkrrB55roNXIdam9Rnyb9Wqjt9SQgzDLTvO1
 Z7c4pXqDn1iMSECAqR7EeKLmsEvnp8omDMqbZOsGiWwka93nuNM4NRhswMF6X3pf
 EbmBAuj0CokWlRoJAxyxrw/Tn+KXWjyOpOMoNQR7dyyewenzPTWw4zLhiSsl4Epo
 e1+3PDkJeZhlrtqMcQhep/OgfnPp/8FlgZXNkq1wsMK6SawIiwvxH3mpELE4I8Zk
 3yzYZvnxIDNLcx6TmDgDcJyp+P/iuFGK707G6ogCoCK9VqyTs+nwdZn3s2o1KRDW
 00LdiuXiqOyfdDthfY/q5suKJoWExh+K1dhQ7Llx169yx3uOjlnzTaSTt8dcvhkh
 Y+Nf5pEk0MVgnldaIRy/Zzr4y81Q7QW6ZwD62NHCIhcSevYczFOP7K6V/mYFmDT1
 xlCDPXeHyuR5DrM=
 =btWt
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20191007' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull selinuxfix from Paul Moore:
 "One patch to ensure we don't copy bad memory up into userspace"

* tag 'selinux-pr-20191007' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix context string corruption in convert_context()
2019-10-08 10:51:37 -07:00
Joshua Brindle
42345b68c2 selinux: default_range glblub implementation
A policy developer can now specify glblub as a default_range default and
the computed transition will be the intersection of the mls range of
the two contexts.

The glb (greatest lower bound) lub (lowest upper bound) of a range is calculated
as the greater of the low sensitivities and the lower of the high sensitivities
and the and of each category bitmap.

This can be used by MLS solution developers to compute a context that satisfies,
for example, the range of a network interface and the range of a user logging in.

Some examples are:

User Permitted Range | Network Device Label | Computed Label
---------------------|----------------------|----------------
s0-s1:c0.c12         | s0                   | s0
s0-s1:c0.c12         | s0-s1:c0.c1023       | s0-s1:c0.c12
s0-s4:c0.c512        | s1-s1:c0.c1023       | s1-s1:c0.c512
s0-s15:c0,c2         | s4-s6:c0.c128        | s4-s6:c0,c2
s0-s4                | s2-s6                | s2-s4
s0-s4                | s5-s8                | INVALID
s5-s8                | s0-s4                | INVALID

Signed-off-by: Joshua Brindle <joshua.brindle@crunchydata.com>
[PM: subject lines and checkpatch.pl fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-10-07 19:01:35 -04:00
Harish Kasiviswanathan
4b7d4d453f device_cgroup: Export devcgroup_check_permission
For AMD compute (amdkfd) driver.

All AMD compute devices are exported via single device node /dev/kfd. As
a result devices cannot be controlled individually using device cgroup.

AMD compute devices will rely on its graphics counterpart that exposes
/dev/dri/renderN node for each device. For each task (based on its
cgroup), KFD driver will check if /dev/dri/renderN node is accessible
before exposing it.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-07 15:11:38 -05:00
David S. Miller
6f4c930e02 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2019-10-05 13:37:23 -07:00
Masahiro Yamada
7a8beb7ad5 integrity: remove pointless subdir-$(CONFIG_...)
The ima/ and evm/ sub-directories contain built-in objects, so
obj-$(CONFIG_...) is the correct way to descend into them.

subdir-$(CONFIG_...) is redundant.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05 15:29:49 +09:00
Masahiro Yamada
6b190d3ce0 integrity: remove unneeded, broken attempt to add -fshort-wchar
I guess commit 15ea0e1e3e18 ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.

load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:

  $(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar

But, you do not need to fix it.

Commit 8c97023cf051 ("Kbuild: use -fshort-wchar globally") had already
added -fshort-wchar globally. This code was unneeded in the first place.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05 15:29:49 +09:00
Ondrej Mosnacek
2a5243937c selinux: fix context string corruption in convert_context()
string_to_context_struct() may garble the context string, so we need to
copy back the contents again from the old context struct to avoid
storing the corrupted context.

Since string_to_context_struct() tokenizes (and therefore truncates) the
context string and we are later potentially copying it with kstrdup(),
this may eventually cause pieces of uninitialized kernel memory to be
disclosed to userspace (when copying to userspace based on the stored
length and not the null character).

How to reproduce on Fedora and similar:
    # dnf install -y memcached
    # systemctl start memcached
    # semodule -d memcached
    # load_policy
    # load_policy
    # systemctl stop memcached
    # ausearch -m AVC
    type=AVC msg=audit(1570090572.648:313): avc:  denied  { signal } for  pid=1 comm="systemd" scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=process permissive=0 trawcon=73797374656D5F75007400000000000070BE6E847296FFFF726F6D000096FFFF76

Cc: stable@vger.kernel.org
Reported-by: Milos Malik <mmalik@redhat.com>
Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-10-03 14:13:36 -04:00
Jiri Pirko
36fbf1e52b net: rtnetlink: add linkprop commands to add and delete alternative ifnames
Add two commands to add and delete list of link properties. Implement
the first property type along - alternative ifnames.
Each net device can have multiple alternative names.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 14:47:19 -07:00
Jonathan Lebon
3e3e24b420 selinux: allow labeling before policy is loaded
Currently, the SELinux LSM prevents one from setting the
`security.selinux` xattr on an inode without a policy first being
loaded. However, this restriction is problematic: it makes it impossible
to have newly created files with the correct label before actually
loading the policy.

This is relevant in distributions like Fedora, where the policy is
loaded by systemd shortly after pivoting out of the initrd. In such
instances, all files created prior to pivoting will be unlabeled. One
then has to relabel them after pivoting, an operation which inherently
races with other processes trying to access those same files.

Going further, there are use cases for creating the entire root
filesystem on first boot from the initrd (e.g. Container Linux supports
this today[1], and we'd like to support it in Fedora CoreOS as well[2]).
One can imagine doing this in two ways: at the block device level (e.g.
laying down a disk image), or at the filesystem level. In the former,
labeling can simply be part of the image. But even in the latter
scenario, one still really wants to be able to set the right labels when
populating the new filesystem.

This patch enables this by changing behaviour in the following two ways:
1. allow `setxattr` if we're not initialized
2. don't try to set the in-core inode SID if we're not initialized;
   instead leave it as `LABEL_INVALID` so that revalidation may be
   attempted at a later time

Note the first hunk of this patch is mostly the same as a previously
discussed one[3], though it was part of a larger series which wasn't
accepted.

[1] https://coreos.com/os/docs/latest/root-filesystem-placement.html
[2] https://github.com/coreos/fedora-coreos-tracker/issues/94
[3] https://www.spinics.net/lists/linux-initramfs/msg04593.html

Co-developed-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-10-01 09:45:35 -04:00
zhanglin
e40642dc01 selinux: remove load size limit
Load size was limited to 64MB, this was legacy limitation due to vmalloc()
which was removed a while ago.

Signed-off-by: zhanglin <zhang.lin16@zte.com.cn>
[PM: removed comments in the description about 'real world use cases']
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-10-01 09:29:04 -04:00
Linus Torvalds
aefcf2f4b5 Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull kernel lockdown mode from James Morris:
 "This is the latest iteration of the kernel lockdown patchset, from
  Matthew Garrett, David Howells and others.

  From the original description:

    This patchset introduces an optional kernel lockdown feature,
    intended to strengthen the boundary between UID 0 and the kernel.
    When enabled, various pieces of kernel functionality are restricted.
    Applications that rely on low-level access to either hardware or the
    kernel may cease working as a result - therefore this should not be
    enabled without appropriate evaluation beforehand.

    The majority of mainstream distributions have been carrying variants
    of this patchset for many years now, so there's value in providing a
    doesn't meet every distribution requirement, but gets us much closer
    to not requiring external patches.

  There are two major changes since this was last proposed for mainline:

   - Separating lockdown from EFI secure boot. Background discussion is
     covered here: https://lwn.net/Articles/751061/

   -  Implementation as an LSM, with a default stackable lockdown LSM
      module. This allows the lockdown feature to be policy-driven,
      rather than encoding an implicit policy within the mechanism.

  The new locked_down LSM hook is provided to allow LSMs to make a
  policy decision around whether kernel functionality that would allow
  tampering with or examining the runtime state of the kernel should be
  permitted.

  The included lockdown LSM provides an implementation with a simple
  policy intended for general purpose use. This policy provides a coarse
  level of granularity, controllable via the kernel command line:

    lockdown={integrity|confidentiality}

  Enable the kernel lockdown feature. If set to integrity, kernel features
  that allow userland to modify the running kernel are disabled. If set to
  confidentiality, kernel features that allow userland to extract
  confidential information from the kernel are also disabled.

  This may also be controlled via /sys/kernel/security/lockdown and
  overriden by kernel configuration.

  New or existing LSMs may implement finer-grained controls of the
  lockdown features. Refer to the lockdown_reason documentation in
  include/linux/security.h for details.

  The lockdown feature has had signficant design feedback and review
  across many subsystems. This code has been in linux-next for some
  weeks, with a few fixes applied along the way.

  Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf
  when kernel lockdown is in confidentiality mode") is missing a
  Signed-off-by from its author. Matthew responded that he is providing
  this under category (c) of the DCO"

* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
  kexec: Fix file verification on S390
  security: constify some arrays in lockdown LSM
  lockdown: Print current->comm in restriction messages
  efi: Restrict efivar_ssdt_load when the kernel is locked down
  tracefs: Restrict tracefs when the kernel is locked down
  debugfs: Restrict debugfs when the kernel is locked down
  kexec: Allow kexec_file() with appropriate IMA policy when locked down
  lockdown: Lock down perf when in confidentiality mode
  bpf: Restrict bpf when kernel lockdown is in confidentiality mode
  lockdown: Lock down tracing and perf kprobes when in confidentiality mode
  lockdown: Lock down /proc/kcore
  x86/mmiotrace: Lock down the testmmiotrace module
  lockdown: Lock down module params that specify hardware parameters (eg. ioport)
  lockdown: Lock down TIOCSSERIAL
  lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
  acpi: Disable ACPI table override if the kernel is locked down
  acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
  ACPI: Limit access to custom_method when the kernel is locked down
  x86/msr: Restrict MSR access when the kernel is locked down
  x86: Lock down IO port access when the kernel is locked down
  ...
2019-09-28 08:14:15 -07:00
Linus Torvalds
f1f2f614d5 Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
 "The major feature in this time is IMA support for measuring and
  appraising appended file signatures. In addition are a couple of bug
  fixes and code cleanup to use struct_size().

  In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
  image may be signed with an appended signature, using the same
  scripts/sign-file tool that is used to sign kernel modules.

  Similarly, the initramfs may contain an appended signature.

  This contained a lot of refactoring of the existing appended signature
  verification code, so that IMA could retain the existing framework of
  calculating the file hash once, storing it in the IMA measurement list
  and extending the TPM, verifying the file's integrity based on a file
  hash or signature (eg. xattrs), and adding an audit record containing
  the file hash, all based on policy. (The IMA support for appended
  signatures patch set was posted and reviewed 11 times.)

  The support for appended signature paves the way for adding other
  signature verification methods, such as fs-verity, based on a single
  system-wide policy. The file hash used for verifying the signature and
  the signature, itself, can be included in the IMA measurement list"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: ima_api: Use struct_size() in kzalloc()
  ima: use struct_size() in kzalloc()
  sefltest/ima: support appended signatures (modsig)
  ima: Fix use after free in ima_read_modsig()
  MODSIGN: make new include file self contained
  ima: fix freeing ongoing ahash_request
  ima: always return negative code for error
  ima: Store the measurement again when appraising a modsig
  ima: Define ima-modsig template
  ima: Collect modsig
  ima: Implement support for module-style appended signatures
  ima: Factor xattr_verify() out of ima_appraise_measurement()
  ima: Add modsig appraise_type option for module-style appended signatures
  integrity: Select CONFIG_KEYS instead of depending on it
  PKCS#7: Introduce pkcs7_get_digest()
  PKCS#7: Refactor verify_pkcs7_signature()
  MODSIGN: Export module signature definitions
  ima: initialize the "template" field with the default template
2019-09-27 19:37:27 -07:00
Roberto Sassu
9f75c82246 KEYS: trusted: correctly initialize digests and fix locking issue
Commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to
tpm_pcr_extend()") modifies tpm_pcr_extend() to accept a digest for each
PCR bank. After modification, tpm_pcr_extend() expects that digests are
passed in the same order as the algorithms set in chip->allocated_banks.

This patch fixes two issues introduced in the last iterations of the patch
set: missing initialization of the TPM algorithm ID in the tpm_digest
structures passed to tpm_pcr_extend() by the trusted key module, and
unreleased locks in the TPM driver due to returning from tpm_pcr_extend()
without calling tpm_put_ops().

Cc: stable@vger.kernel.org
Fixes: 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-25 02:43:53 +03:00
Linus Torvalds
e94f8ccde4 I have four patches for v5.4. Nothing is major. All but one are in
response to mechanically detected potential issues. The remaining
 patch cleans up kernel-doc notations.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEC+9tH1YyUwIQzUIeOKUVfIxDyBEFAl2JI5wXHGNhc2V5QHNj
 aGF1Zmxlci1jYS5jb20ACgkQOKUVfIxDyBEOJQ/5AXdQTd09LMp9jB54u9Usdm71
 +kyJ/KudEja8/pCDDNboiXSfoagRqJ8AbuBAbGLtWLXc3smUcL1mncdfJDJAk88J
 mbIB+qWMls5fC25udD+B2bF2py+eyVJ7dsnvHZg1mS5KUxYBMWVEqgX9zW0EFgNH
 xd2/nB314GhULrfqagxxCd/HpbZ3GV1sM+BkfRPx2zm3gJ8xAuXm1xMMgchP9WqH
 MFJDqk8r1wXCog8OkjQjAYR8zGRJTrP9W6UY9p1L6rp9rtfyPObBuAMLKv3WlXx8
 Jz7idqSDNa49V7W3UrWcjXCunbjyPR7HszuuxhTC+EmB1MRU4IdX9I6ZdAaTuxEM
 jFNwSSjIWRgXkJfLxrDX1ukFPU0JCd8ms7Lzw5YHq2TWt/V/7h4jyUCN8o9BN80r
 7WzqdzT4v+Exc6TpqlpkHiQjJFL4ByEzNt3xNVZ3UFIyxnogVi45kL/78PsqDk/j
 XWqM9bED8dBjM/K3EGqzj0mPCtILLnTm9ZyDvFF75jabf4rk0E354yGcuamoF+eM
 UTT+3NTPQB/kI5i9av8ibGezInVVRQeHuI1/qIaD/Hsr8K7VJbqlB1k/rUxUZaSy
 6g9e0mU2GLgM+eW0EKW0GWpV6/STqzskxu2TW46tobpOykwH9dNKJHhJzx7nEWJi
 +5kMcGIvFCha6922/sM=
 =QV1S
 -----END PGP SIGNATURE-----

Merge tag 'smack-for-5.4-rc1' of git://github.com/cschaufler/smack-next

Pull smack updates from Casey Schaufler:
 "Four patches for v5.4. Nothing is major.

  All but one are in response to mechanically detected potential issues.
  The remaining patch cleans up kernel-doc notations"

* tag 'smack-for-5.4-rc1' of git://github.com/cschaufler/smack-next:
  smack: use GFP_NOFS while holding inode_smack::smk_lock
  security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb()
  smack: fix some kernel-doc notations
  Smack: Don't ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set
2019-09-23 14:25:45 -07:00
Linus Torvalds
1b5fb41544 Merge tag 'safesetid-bugfix-5.4' of git://github.com/micah-morton/linux
Pull SafeSetID fix from Micah Morton:
 "Jann Horn sent some patches to fix some bugs in SafeSetID for 5.3.
  After he had done his testing there were a couple small code tweaks
  that went in and caused this bug.

  From what I can see SafeSetID is broken in 5.3 and crashes the kernel
  every time during initialization if you try to use it. I came across
  this bug when backporting Jann's changes for 5.3 to older kernels
  (4.14 and 4.19). I've tested on a Chrome OS device with those kernels
  and verified that this change fixes things.

  It doesn't seem super useful to have this bake in linux-next, since it
  is completely broken in 5.3 and nobody noticed"

* tag 'safesetid-bugfix-5.4' of git://github.com/micah-morton/linux:
  LSM: SafeSetID: Stop releasing uninitialized ruleset
2019-09-23 11:39:56 -07:00
Linus Torvalds
5825a95fe9 selinux/stable-5.4 PR 20190917
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl2BLvcUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXP9pA/+Ls9sRGZoEipycbgRnwkL9/6yFtn4
 UCFGMP0eobrjL82i8uMOa/72Budsp3ZaZRxf36NpbMDPyB9ohp5jf7o1WFTELESv
 EwxVvOMNwrxO2UbzRv3iywnhdPVJ4gHPa4GWfBHu2EEfhz3/Bv0tPIBdeXAbq4aC
 R0p+M9X0FFEp9eP4ftwOvFGpbZ8zKo1kwgdvCnqLhHDkyqtapqO/ByCTe1VATERP
 fyxjYDZNnITmI0plaIxCeeudklOTtVSAL4JPh1rk8rZIkUznZ4EBDHxdKiaz3j9C
 ZtAthiAA9PfAwf4DZSPHnGsfINxeNBKLD65jZn/PUne/gNJEx4DK041X9HXBNwjv
 OoArw58LCzxtTNZ//WB4CovRpeSdKvmKv0oh61k8cdQahLeHhzXE1wLQbnnBJLI3
 CTsumIp4ZPEOX5r4ogdS3UIQpo3KrZump7VO85yUTRni150JpZR3egYpmcJ0So1A
 QTPemBhC2CHJVTpycYZ9fVTlPeC4oNwosPmvpB8XeGu3w5JpuNSId+BDR/ZlQAmq
 xWiIocGL3UMuPuJUrTGChifqBAgzK+gLa7S7RYPEnTCkj6LVQwsuP4gBXf75QTG4
 FPwVcoMSDFxUDF0oFqwz4GfJlCxBSzX+BkWUn6jIiXKXBnQjU+1gu6KTwE25mf/j
 snJznFk25hFYFaM=
 =n4ht
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull selinux updates from Paul Moore:

 - Add LSM hooks, and SELinux access control hooks, for dnotify,
   fanotify, and inotify watches. This has been discussed with both the
   LSM and fs/notify folks and everybody is good with these new hooks.

 - The LSM stacking changes missed a few calls to current_security() in
   the SELinux code; we fix those and remove current_security() for
   good.

 - Improve our network object labeling cache so that we always return
   the object's label, even when under memory pressure. Previously we
   would return an error if we couldn't allocate a new cache entry, now
   we always return the label even if we can't create a new cache entry
   for it.

 - Convert the sidtab atomic_t counter to a normal u32 with
   READ/WRITE_ONCE() and memory barrier protection.

 - A few patches to policydb.c to clean things up (remove forward
   declarations, long lines, bad variable names, etc)

* tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  lsm: remove current_security()
  selinux: fix residual uses of current_security() for the SELinux blob
  selinux: avoid atomic_t usage in sidtab
  fanotify, inotify, dnotify, security: add security hook for fs notifications
  selinux: always return a secid from the network caches if we find one
  selinux: policydb - rename type_val_to_struct_array
  selinux: policydb - fix some checkpatch.pl warnings
  selinux: shuffle around policydb.c to get rid of forward declarations
2019-09-23 11:21:04 -07:00
Micah Morton
21ab8580b3 LSM: SafeSetID: Stop releasing uninitialized ruleset
The first time a rule set is configured for SafeSetID, we shouldn't be
trying to release the previously configured ruleset, since there isn't
one. Currently, the pointer that would point to a previously configured
ruleset is uninitialized on first rule set configuration, leading to a
crash when we try to call release_ruleset with that pointer.

Acked-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
2019-09-17 11:27:05 -07:00
Matthew Garrett
f8a9bc623a security: constify some arrays in lockdown LSM
No reason for these not to be const.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2019-09-10 13:27:38 +01:00
Hillf Danton
d41a3effbb keys: Fix missing null pointer check in request_key_auth_describe()
If a request_key authentication token key gets revoked, there's a window in
which request_key_auth_describe() can see it with a NULL payload - but it
makes no check for this and something like the following oops may occur:

	BUG: Kernel NULL pointer dereference at 0x00000038
	Faulting instruction address: 0xc0000000004ddf30
	Oops: Kernel access of bad area, sig: 11 []
	...
	NIP [...] request_key_auth_describe+0x90/0xd0
	LR [...] request_key_auth_describe+0x54/0xd0
	Call Trace:
	[...] request_key_auth_describe+0x54/0xd0 (unreliable)
	[...] proc_keys_show+0x308/0x4c0
	[...] seq_read+0x3d0/0x540
	[...] proc_reg_read+0x90/0x110
	[...] __vfs_read+0x3c/0x70
	[...] vfs_read+0xb4/0x1b0
	[...] ksys_read+0x7c/0x130
	[...] system_call+0x5c/0x70

Fix this by checking for a NULL pointer when describing such a key.

Also make the read routine check for a NULL pointer to be on the safe side.

[DH: Modified to not take already-held rcu lock and modified to also check
 in the read routine]

Fixes: 04c567d9313e ("[PATCH] Keys: Fix race between two instantiators of a key")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-05 14:19:25 -07:00
Stephen Smalley
169ce0c081 selinux: fix residual uses of current_security() for the SELinux blob
We need to use selinux_cred() to fetch the SELinux cred blob instead
of directly using current->security or current_security().  There
were a couple of lingering uses of current_security() in the SELinux code
that were apparently missed during the earlier conversions. IIUC, this
would only manifest as a bug if multiple security modules including
SELinux are enabled and SELinux is not first in the lsm order. After
this change, there appear to be no other users of current_security()
in-tree; perhaps we should remove it altogether.

Fixes: bbd3662a8348 ("Infrastructure management of the cred security blob")
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-09-04 18:41:12 -04:00
Eric Biggers
e5bfad3d7a
smack: use GFP_NOFS while holding inode_smack::smk_lock
inode_smack::smk_lock is taken during smack_d_instantiate(), which is
called during a filesystem transaction when creating a file on ext4.
Therefore to avoid a deadlock, all code that takes this lock must use
GFP_NOFS, to prevent memory reclaim from waiting for the filesystem
transaction to complete.

Reported-by: syzbot+0eefc1e06a77d327a056@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2019-09-04 09:37:07 -07:00
Jia-Ju Bai
3f4287e7d9
security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb()
In smack_socket_sock_rcv_skb(), there is an if statement
on line 3920 to check whether skb is NULL:
    if (skb && skb->secmark != 0)

This check indicates skb can be NULL in some cases.

But on lines 3931 and 3932, skb is used:
    ad.a.u.net->netif = skb->skb_iif;
    ipv6_skb_to_auditdata(skb, &ad.a, NULL);

Thus, possible null-pointer dereferences may occur when skb is NULL.

To fix these possible bugs, an if statement is added to check skb.

These bugs are found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2019-09-04 09:37:07 -07:00
luanshi
a1a07f2234
smack: fix some kernel-doc notations
Fix/add kernel-doc notation and fix typos in security/smack/.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2019-09-04 09:37:07 -07:00
Jann Horn
3675f052b4
Smack: Don't ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set
There is a logic bug in the current smack_bprm_set_creds():
If LSM_UNSAFE_PTRACE is set, but the ptrace state is deemed to be
acceptable (e.g. because the ptracer detached in the meantime), the other
->unsafe flags aren't checked. As far as I can tell, this means that
something like the following could work (but I haven't tested it):

 - task A: create task B with fork()
 - task B: set NO_NEW_PRIVS
 - task B: install a seccomp filter that makes open() return 0 under some
   conditions
 - task B: replace fd 0 with a malicious library
 - task A: attach to task B with PTRACE_ATTACH
 - task B: execve() a file with an SMACK64EXEC extended attribute
 - task A: while task B is still in the middle of execve(), exit (which
   destroys the ptrace relationship)

Make sure that if any flags other than LSM_UNSAFE_PTRACE are set in
bprm->unsafe, we reject the execve().

Cc: stable@vger.kernel.org
Fixes: 5663884caab1 ("Smack: unify all ptrace accesses in the smack")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2019-09-04 09:36:57 -07:00
Eric Biggers
846d2db3e0 keys: ensure that ->match_free() is called in request_key_and_link()
If check_cached_key() returns a non-NULL value, we still need to call
key_type::match_free() to undo key_type::match_preparse().

Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30 11:10:55 -07:00
Gustavo A. R. Silva
2a7f0e53da ima: ima_api: Use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct ima_template_entry {
	...
        struct ima_field_data template_data[0]; /* template related data */
};

instance = kzalloc(sizeof(struct ima_template_entry) + count * sizeof(struct ima_field_data), GFP_NOFS);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_NOFS);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-29 14:23:30 -04:00
Gustavo A. R. Silva
fa5b571753 ima: use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
   int stuff;
   struct boo entry[];
};

instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-29 14:23:22 -04:00
Thiago Jung Bauermann
556d971bda ima: Fix use after free in ima_read_modsig()
If we can't parse the PKCS7 in the appended modsig, we will free the modsig
structure and then access one of its members to determine the error value.

Fixes: 39b07096364a ("ima: Implement support for module-style appended signatures")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-08-28 15:01:24 -04:00
Ondrej Mosnacek
116f21bb96 selinux: avoid atomic_t usage in sidtab
As noted in Documentation/atomic_t.txt, if we don't need the RMW atomic
operations, we should only use READ_ONCE()/WRITE_ONCE() +
smp_rmb()/smp_wmb() where necessary (or the combined variants
smp_load_acquire()/smp_store_release()).

This patch converts the sidtab code to use regular u32 for the counter
and reverse lookup cache and use the appropriate operations instead of
atomic_get()/atomic_set(). Note that when reading/updating the reverse
lookup cache we don't need memory barriers as it doesn't need to be
consistent or accurate. We can now also replace some atomic ops with
regular loads (when under spinlock) and stores (for conversion target
fields that are always accessed under the master table's spinlock).

We can now also bump SIDTAB_MAX to U32_MAX as we can use the full u32
range again.

Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-08-27 13:26:13 -04:00
Matthew Garrett
b602614a81 lockdown: Print current->comm in restriction messages
Print the content of current->comm in messages generated by lockdown to
indicate a restriction that was hit.  This makes it a bit easier to find
out what caused the message.

The message now patterned something like:

        Lockdown: <comm>: <what> is restricted; see man kernel_lockdown.7

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:17 -07:00
Matthew Garrett
ccbd54ff54 tracefs: Restrict tracefs when the kernel is locked down
Tracefs may release more information about the kernel than desirable, so
restrict it when the kernel is locked down in confidentiality mode by
preventing open().

(Fixed by Ben Hutchings to avoid a null dereference in
default_file_open())

Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:17 -07:00
David Howells
5496197f9b debugfs: Restrict debugfs when the kernel is locked down
Disallow opening of debugfs files that might be used to muck around when
the kernel is locked down as various drivers give raw access to hardware
through debugfs.  Given the effort of auditing all 2000 or so files and
manually fixing each one as necessary, I've chosen to apply a heuristic
instead.  The following changes are made:

 (1) chmod and chown are disallowed on debugfs objects (though the root dir
     can be modified by mount and remount, but I'm not worried about that).

 (2) When the kernel is locked down, only files with the following criteria
     are permitted to be opened:

	- The file must have mode 00444
	- The file must not have ioctl methods
	- The file must not have mmap

 (3) When the kernel is locked down, files may only be opened for reading.

Normal device interaction should be done through configfs, sysfs or a
miscdev, not debugfs.

Note that this makes it unnecessary to specifically lock down show_dsts(),
show_devs() and show_call() in the asus-wmi driver.

I would actually prefer to lock down all files by default and have the
the files unlocked by the creator.  This is tricky to manage correctly,
though, as there are 19 creation functions and ~1600 call sites (some of
them in loops scanning tables).

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andy Shevchenko <andy.shevchenko@gmail.com>
cc: acpi4asus-user@lists.sourceforge.net
cc: platform-driver-x86@vger.kernel.org
cc: Matthew Garrett <mjg59@srcf.ucam.org>
cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <greg@kroah.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Matthew Garrett <matthewgarrett@google.com>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:17 -07:00
Matthew Garrett
29d3c1c8df kexec: Allow kexec_file() with appropriate IMA policy when locked down
Systems in lockdown mode should block the kexec of untrusted kernels.
For x86 and ARM we can ensure that a kernel is trustworthy by validating
a PE signature, but this isn't possible on other architectures. On those
platforms we can use IMA digital signatures instead. Add a function to
determine whether IMA has or will verify signatures for a given event type,
and if so permit kexec_file() even if the kernel is otherwise locked down.
This is restricted to cases where CONFIG_INTEGRITY_TRUSTED_KEYRING is set
in order to prevent an attacker from loading additional keys at runtime.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
b0c8fdc7fd lockdown: Lock down perf when in confidentiality mode
Disallow the use of certain perf facilities that might allow userspace to
access kernel data.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
9d1f8be5cf bpf: Restrict bpf when kernel lockdown is in confidentiality mode
bpf_read() and bpf_read_str() could potentially be abused to (eg) allow
private keys in kernel memory to be leaked. Disable them if the kernel
has been locked down in confidentiality mode.

Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
cc: netdev@vger.kernel.org
cc: Chun-Yi Lee <jlee@suse.com>
cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
a94549dd87 lockdown: Lock down tracing and perf kprobes when in confidentiality mode
Disallow the creation of perf and ftrace kprobes when the kernel is
locked down in confidentiality mode by preventing their registration.
This prevents kprobes from being used to access kernel memory to steal
crypto data, but continues to allow the use of kprobes from signed
modules.

Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: davem@davemloft.net
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
02e935bf5b lockdown: Lock down /proc/kcore
Disallow access to /proc/kcore when the kernel is locked down to prevent
access to cryptographic data. This is limited to lockdown
confidentiality mode and is still permitted in integrity mode.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
906357f77a x86/mmiotrace: Lock down the testmmiotrace module
The testmmiotrace module shouldn't be permitted when the kernel is locked
down as it can be used to arbitrarily read and write MMIO space. This is
a runtime check rather than buildtime in order to allow configurations
where the same kernel may be run in both locked down or permissive modes
depending on local policy.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
cc: Thomas Gleixner <tglx@linutronix.de>
cc: Steven Rostedt <rostedt@goodmis.org>
cc: Ingo Molnar <mingo@kernel.org>
cc: "H. Peter Anvin" <hpa@zytor.com>
cc: x86@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
20657f66ef lockdown: Lock down module params that specify hardware parameters (eg. ioport)
Provided an annotation for module parameters that specify hardware
parameters (such as io ports, iomem addresses, irqs, dma channels, fixed
dma buffers and other types).

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Jessica Yu <jeyu@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
794edf30ee lockdown: Lock down TIOCSSERIAL
Lock down TIOCSSERIAL as that can be used to change the ioport and irq
settings on a serial port.  This only appears to be an issue for the serial
drivers that use the core serial code.  All other drivers seem to either
ignore attempts to change port/irq or give an error.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
David Howells
3f19cad3fa lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
Prohibit replacement of the PCMCIA Card Information Structure when the
kernel is locked down.

Suggested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
Matthew Garrett
f474e1486b ACPI: Limit access to custom_method when the kernel is locked down
custom_method effectively allows arbitrary access to system memory, making
it possible for an attacker to circumvent restrictions on module loading.
Disable it if the kernel is locked down.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
cc: linux-acpi@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
Matthew Garrett
95f5e95f41 x86/msr: Restrict MSR access when the kernel is locked down
Writing to MSRs should not be allowed if the kernel is locked down, since
it could lead to execution of arbitrary code in kernel mode.  Based on a
patch by Kees Cook.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
cc: x86@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00
Matthew Garrett
96c4f67293 x86: Lock down IO port access when the kernel is locked down
IO port access would permit users to gain access to PCI configuration
registers, which in turn (on a lot of hardware) give access to MMIO
register space. This would potentially permit root to trigger arbitrary
DMA, so lock it down by default.

This also implicitly locks down the KDADDIO, KDDELIO, KDENABIO and
KDDISABIO console ioctls.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
cc: x86@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2019-08-19 21:54:16 -07:00