Commit Graph

286 Commits

Author SHA1 Message Date
Christian Borntraeger
dd135ebbd2 kvm: provide kvm.h for all architecture: fixes headers_install
Currently include/linux/kvm.h is not considered by make headers_install,
because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h.  This problem
was introduced by

commit fb56dbb31c
Author: Avi Kivity <avi@qumranet.com>
Date:   Sun Dec 2 10:50:06 2007 +0200

    KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM

    Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
    includes, not existing.  Rather than add a zillion <asm/kvm.h>s, export kvm.
    only if the arch actually supports it.

    Signed-off-by: Avi Kivity <avi@qumranet.com>

which makes this an 2.6.25 regression.

One way of solving the issue is to enhance Kbuild, but Avi and David conviced
me, that changing headers_install is not the way to go.  This patch changes
the definition for linux/kvm.h to unifdef-y.

If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all
architectures without asm/kvm.h.  Therefore, this patch also provides
asm/kvm.h on all architectures.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Avi Kivity <avi@qumranet.com>
Cc: Sam Ravnborg <sam@ravnborg.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02 15:28:18 -07:00
Hugh Dickins
1e8352784a percpu: fix DEBUG_PREEMPT per_cpu checking
2.6.25-rc1 percpu changes broke CONFIG_DEBUG_PREEMPT's per_cpu checking
on several architectures.  On s390, sparc64 and x86 it's been weakened to
not checking at all; whereas on powerpc64 it's become too strict, issuing
warnings from __raw_get_cpu_var in io_schedule and init_timer for example.

Fix this by weakening powerpc's __my_cpu_offset to use the non-checking
local_paca instead of get_paca (which itself contains such a check);
and strengthening the generic my_cpu_offset to go the old slow way via
smp_processor_id when CONFIG_DEBUG_PREEMPT (debug_smp_processor_id is
where all the knowledge of what's correct when lives).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Reviewed-by: Mike Travis <travis@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 12:09:28 -08:00
Sam Ravnborg
37c514e3df Add missing init section definitions
When adding __devinitconst etc. the __initconst variant
were missed.
Add this one and proper definitions for .head.text for use
in .S files.
The naming .head.text is preferred over .text.head as the
latter will conflict for a function named head when introducing
-ffunctions-sections.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-19 21:00:18 +01:00
Andi Kleen
271cad6d7e Make topology fallback macros reference their arguments.
This avoids warnings with unreferenced variables in the !NUMA case.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-11 20:37:29 -08:00
Harvey Harrison
144b2a9146 asm-generic: remove fastcall
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:31 -08:00
David Howells
7fa3031500 aout: suppress A.OUT library support if !CONFIG_ARCH_SUPPORTS_AOUT
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.

Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case.  Not
only that, but under such conditions A.OUT core dumps are not produced either.

To make this work, this patch also does the following:

 (1) Makes the existence of the contents of linux/a.out.h contingent on
     CONFIG_ARCH_SUPPORTS_AOUT.

 (2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
     core dumping code.

 (3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline.  This
     is then included only where needed.  This means that this bit of arch
     code will be stored in the appropriate A.OUT binfmt module rather than
     the core kernel.

 (4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
     needed) and FRV.

This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.

[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00
Heiko Carstens
aa7738a5f5 tty: let architectures override the user/kernel macros.
Give architectures that support the new termios2 the possibilty to overide the
user_termios_to_kernel_termios and kernel_termios_to_user_termios macros.  As
soon as all architectures that use the generic variant have been converted the
ifdefs can go away again.  Architectures in question are avr32, frv, powerpc
and s390.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:24 -08:00
Mathieu Desnoyers
068fbad288 Add cmpxchg_local to asm-generic for per cpu atomic operations
Emulates the cmpxchg_local by disabling interrupts around variable modification.
This is not reentrant wrt NMIs and MCEs. It is only protected against normal
interrupts, but this is enough for architectures without such interrupt sources
or if used in a context where the data is not shared with such handlers.

It can be used as a fallback for architectures lacking a real cmpxchg
instruction.

For architectures that have a real cmpxchg but does not have NMIs or MCE,
testing which of the generic vs architecture specific cmpxchg is the fastest
should be done.

asm-generic/cmpxchg.h defines a cmpxchg that uses cmpxchg_local. It is meant to
be used as a cmpxchg fallback for architectures that do not support SMP.

* Patch series comments

Using cmpxchg_local shows a performance improvements of the fast path goes from
a 66% speedup on a Pentium 4 to a 14% speedup on AMD64.

In detail:

Tested-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Measurements on a Pentium4, 3GHz, Hyperthread.
SLUB Performance testing
========================
1. Kmalloc: Repeatedly allocate then free test

* slub HEAD, test 1
kmalloc(8) = 201 cycles         kfree = 351 cycles
kmalloc(16) = 198 cycles        kfree = 359 cycles
kmalloc(32) = 200 cycles        kfree = 381 cycles
kmalloc(64) = 224 cycles        kfree = 394 cycles
kmalloc(128) = 285 cycles       kfree = 424 cycles
kmalloc(256) = 411 cycles       kfree = 546 cycles
kmalloc(512) = 480 cycles       kfree = 619 cycles
kmalloc(1024) = 623 cycles      kfree = 750 cycles
kmalloc(2048) = 686 cycles      kfree = 811 cycles
kmalloc(4096) = 482 cycles      kfree = 538 cycles
kmalloc(8192) = 680 cycles      kfree = 734 cycles
kmalloc(16384) = 713 cycles     kfree = 843 cycles

* Slub HEAD, test 2
kmalloc(8) = 190 cycles         kfree = 351 cycles
kmalloc(16) = 195 cycles        kfree = 360 cycles
kmalloc(32) = 201 cycles        kfree = 370 cycles
kmalloc(64) = 245 cycles        kfree = 389 cycles
kmalloc(128) = 283 cycles       kfree = 413 cycles
kmalloc(256) = 409 cycles       kfree = 547 cycles
kmalloc(512) = 476 cycles       kfree = 616 cycles
kmalloc(1024) = 628 cycles      kfree = 753 cycles
kmalloc(2048) = 684 cycles      kfree = 811 cycles
kmalloc(4096) = 480 cycles      kfree = 539 cycles
kmalloc(8192) = 661 cycles      kfree = 746 cycles
kmalloc(16384) = 741 cycles     kfree = 856 cycles

* cmpxchg_local Slub test
kmalloc(8) = 83 cycles          kfree = 363 cycles
kmalloc(16) = 85 cycles         kfree = 372 cycles
kmalloc(32) = 92 cycles         kfree = 377 cycles
kmalloc(64) = 115 cycles        kfree = 397 cycles
kmalloc(128) = 179 cycles       kfree = 438 cycles
kmalloc(256) = 314 cycles       kfree = 564 cycles
kmalloc(512) = 398 cycles       kfree = 615 cycles
kmalloc(1024) = 573 cycles      kfree = 745 cycles
kmalloc(2048) = 629 cycles      kfree = 816 cycles
kmalloc(4096) = 473 cycles      kfree = 548 cycles
kmalloc(8192) = 659 cycles      kfree = 745 cycles
kmalloc(16384) = 724 cycles     kfree = 843 cycles

2. Kmalloc: alloc/free test

* slub HEAD, test 1
kmalloc(8)/kfree = 322 cycles
kmalloc(16)/kfree = 318 cycles
kmalloc(32)/kfree = 318 cycles
kmalloc(64)/kfree = 325 cycles
kmalloc(128)/kfree = 318 cycles
kmalloc(256)/kfree = 328 cycles
kmalloc(512)/kfree = 328 cycles
kmalloc(1024)/kfree = 328 cycles
kmalloc(2048)/kfree = 328 cycles
kmalloc(4096)/kfree = 678 cycles
kmalloc(8192)/kfree = 1013 cycles
kmalloc(16384)/kfree = 1157 cycles

* Slub HEAD, test 2
kmalloc(8)/kfree = 323 cycles
kmalloc(16)/kfree = 318 cycles
kmalloc(32)/kfree = 318 cycles
kmalloc(64)/kfree = 318 cycles
kmalloc(128)/kfree = 318 cycles
kmalloc(256)/kfree = 328 cycles
kmalloc(512)/kfree = 328 cycles
kmalloc(1024)/kfree = 328 cycles
kmalloc(2048)/kfree = 328 cycles
kmalloc(4096)/kfree = 648 cycles
kmalloc(8192)/kfree = 1009 cycles
kmalloc(16384)/kfree = 1105 cycles

* cmpxchg_local Slub test
kmalloc(8)/kfree = 112 cycles
kmalloc(16)/kfree = 103 cycles
kmalloc(32)/kfree = 103 cycles
kmalloc(64)/kfree = 103 cycles
kmalloc(128)/kfree = 112 cycles
kmalloc(256)/kfree = 111 cycles
kmalloc(512)/kfree = 111 cycles
kmalloc(1024)/kfree = 111 cycles
kmalloc(2048)/kfree = 121 cycles
kmalloc(4096)/kfree = 650 cycles
kmalloc(8192)/kfree = 1042 cycles
kmalloc(16384)/kfree = 1149 cycles

Tested-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Measurements on a AMD64 2.0 GHz dual-core

In this test, we seem to remove 10 cycles from the kmalloc fast path.
On small allocations, it gives a 14% performance increase. kfree fast
path also seems to have a 10 cycles improvement.

1. Kmalloc: Repeatedly allocate then free test

* cmpxchg_local slub
kmalloc(8) = 63 cycles      kfree = 126 cycles
kmalloc(16) = 66 cycles     kfree = 129 cycles
kmalloc(32) = 76 cycles     kfree = 138 cycles
kmalloc(64) = 100 cycles    kfree = 288 cycles
kmalloc(128) = 128 cycles   kfree = 309 cycles
kmalloc(256) = 170 cycles   kfree = 315 cycles
kmalloc(512) = 221 cycles   kfree = 357 cycles
kmalloc(1024) = 324 cycles  kfree = 393 cycles
kmalloc(2048) = 354 cycles  kfree = 440 cycles
kmalloc(4096) = 394 cycles  kfree = 330 cycles
kmalloc(8192) = 523 cycles  kfree = 481 cycles
kmalloc(16384) = 643 cycles kfree = 649 cycles

* Base
kmalloc(8) = 74 cycles      kfree = 113 cycles
kmalloc(16) = 76 cycles     kfree = 116 cycles
kmalloc(32) = 85 cycles     kfree = 133 cycles
kmalloc(64) = 111 cycles    kfree = 279 cycles
kmalloc(128) = 138 cycles   kfree = 294 cycles
kmalloc(256) = 181 cycles   kfree = 304 cycles
kmalloc(512) = 237 cycles   kfree = 327 cycles
kmalloc(1024) = 340 cycles  kfree = 379 cycles
kmalloc(2048) = 378 cycles  kfree = 433 cycles
kmalloc(4096) = 399 cycles  kfree = 329 cycles
kmalloc(8192) = 528 cycles  kfree = 624 cycles
kmalloc(16384) = 651 cycles kfree = 737 cycles

2. Kmalloc: alloc/free test

* cmpxchg_local slub
kmalloc(8)/kfree = 96 cycles
kmalloc(16)/kfree = 97 cycles
kmalloc(32)/kfree = 97 cycles
kmalloc(64)/kfree = 97 cycles
kmalloc(128)/kfree = 97 cycles
kmalloc(256)/kfree = 105 cycles
kmalloc(512)/kfree = 108 cycles
kmalloc(1024)/kfree = 105 cycles
kmalloc(2048)/kfree = 107 cycles
kmalloc(4096)/kfree = 390 cycles
kmalloc(8192)/kfree = 626 cycles
kmalloc(16384)/kfree = 662 cycles

* Base
kmalloc(8)/kfree = 116 cycles
kmalloc(16)/kfree = 116 cycles
kmalloc(32)/kfree = 116 cycles
kmalloc(64)/kfree = 116 cycles
kmalloc(128)/kfree = 116 cycles
kmalloc(256)/kfree = 126 cycles
kmalloc(512)/kfree = 126 cycles
kmalloc(1024)/kfree = 126 cycles
kmalloc(2048)/kfree = 126 cycles
kmalloc(4096)/kfree = 384 cycles
kmalloc(8192)/kfree = 749 cycles
kmalloc(16384)/kfree = 786 cycles

Tested-by: Christoph Lameter <clameter@sgi.com>
I can confirm Mathieus' measurement now:

Athlon64:

regular NUMA/discontig

1. Kmalloc: Repeatedly allocate then free test
10000 times kmalloc(8) -> 79 cycles kfree -> 92 cycles
10000 times kmalloc(16) -> 79 cycles kfree -> 93 cycles
10000 times kmalloc(32) -> 88 cycles kfree -> 95 cycles
10000 times kmalloc(64) -> 124 cycles kfree -> 132 cycles
10000 times kmalloc(128) -> 157 cycles kfree -> 247 cycles
10000 times kmalloc(256) -> 200 cycles kfree -> 257 cycles
10000 times kmalloc(512) -> 250 cycles kfree -> 277 cycles
10000 times kmalloc(1024) -> 337 cycles kfree -> 314 cycles
10000 times kmalloc(2048) -> 365 cycles kfree -> 330 cycles
10000 times kmalloc(4096) -> 352 cycles kfree -> 240 cycles
10000 times kmalloc(8192) -> 456 cycles kfree -> 340 cycles
10000 times kmalloc(16384) -> 646 cycles kfree -> 471 cycles
2. Kmalloc: alloc/free test
10000 times kmalloc(8)/kfree -> 124 cycles
10000 times kmalloc(16)/kfree -> 124 cycles
10000 times kmalloc(32)/kfree -> 124 cycles
10000 times kmalloc(64)/kfree -> 124 cycles
10000 times kmalloc(128)/kfree -> 124 cycles
10000 times kmalloc(256)/kfree -> 132 cycles
10000 times kmalloc(512)/kfree -> 132 cycles
10000 times kmalloc(1024)/kfree -> 132 cycles
10000 times kmalloc(2048)/kfree -> 132 cycles
10000 times kmalloc(4096)/kfree -> 319 cycles
10000 times kmalloc(8192)/kfree -> 486 cycles
10000 times kmalloc(16384)/kfree -> 539 cycles

cmpxchg_local NUMA/discontig

1. Kmalloc: Repeatedly allocate then free test
10000 times kmalloc(8) -> 55 cycles kfree -> 90 cycles
10000 times kmalloc(16) -> 55 cycles kfree -> 92 cycles
10000 times kmalloc(32) -> 70 cycles kfree -> 91 cycles
10000 times kmalloc(64) -> 100 cycles kfree -> 141 cycles
10000 times kmalloc(128) -> 128 cycles kfree -> 233 cycles
10000 times kmalloc(256) -> 172 cycles kfree -> 251 cycles
10000 times kmalloc(512) -> 225 cycles kfree -> 275 cycles
10000 times kmalloc(1024) -> 325 cycles kfree -> 311 cycles
10000 times kmalloc(2048) -> 346 cycles kfree -> 330 cycles
10000 times kmalloc(4096) -> 351 cycles kfree -> 238 cycles
10000 times kmalloc(8192) -> 450 cycles kfree -> 342 cycles
10000 times kmalloc(16384) -> 630 cycles kfree -> 546 cycles
2. Kmalloc: alloc/free test
10000 times kmalloc(8)/kfree -> 81 cycles
10000 times kmalloc(16)/kfree -> 81 cycles
10000 times kmalloc(32)/kfree -> 81 cycles
10000 times kmalloc(64)/kfree -> 81 cycles
10000 times kmalloc(128)/kfree -> 81 cycles
10000 times kmalloc(256)/kfree -> 91 cycles
10000 times kmalloc(512)/kfree -> 90 cycles
10000 times kmalloc(1024)/kfree -> 91 cycles
10000 times kmalloc(2048)/kfree -> 90 cycles
10000 times kmalloc(4096)/kfree -> 318 cycles
10000 times kmalloc(8192)/kfree -> 483 cycles
10000 times kmalloc(16384)/kfree -> 536 cycles

Changelog:
- Ran though checkpatch.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:30 -08:00
Kirill A. Shutemov
ed7b1889da Unexport asm/page.h
Do not export asm/page.h during make headers_install.  This removes PAGE_SIZE
from userspace headers.

Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:30 -08:00
Kirill A. Shutemov
6cc931b9b5 Unexport asm/elf.h
Do not export asm/elf.h during make headers_install.

Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:30 -08:00
Kirill A. Shutemov
c1445db9f7 Unexport asm/user.h and linux/user.h
Do not export asm/user.h and linux/user.h during make headers_install.

Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:29 -08:00
Robin Getz
a3b81113fb remove support for un-needed _extratext section
When passing a zero address to kallsyms_lookup(), the kernel thought it was
a valid kernel address, even if it is not.  This is because is_ksym_addr()
called is_kernel_extratext() and checked against labels that don't exist on
many archs (which default as zero).  Since PPC was the only kernel which
defines _extra_text, (in 2005), and no longer needs it, this patch removes
_extra_text support.

For some history (provided by Jon):
 http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019734.html
 http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019736.html
 http://ozlabs.org/pipermail/linuxppc-dev/2005-September/019751.html

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jon Loeliger <jdl@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Michael Neuling
06b8e878a9 taskstats scaled time cleanup
This moves the ability to scale cputime into generic code.  This allows us
to fix the issue in kernel/timer.c (noticed by Balbir) where we could only
add an unscaled value to the scaled utime/stime.

This adds a cputime_to_scaled function.  As before, the POWERPC version
does the scaling based on the last SPURR/PURR ratio calculated.  The
generic and s390 (only other arch to implement asm/cputime.h) versions are
both NOPs.

Also moves the SPURR and PURR snapshots closer.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:00 -08:00
Benjamin Herrenschmidt
5e5419734c add mm argument to pte/pmd/pud/pgd_free
(with Martin Schwidefsky <schwidefsky@de.ibm.com>)

The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as
first argument.  The free functions do not get the mm_struct argument.  This
is 1) asymmetrical and 2) to do mm related page table allocations the mm
argument is needed on the free function as well.

[kamalesh@linux.vnet.ibm.com: i386 fix]
[akpm@linux-foundation.org: coding-syle fixes]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:18 -08:00
David Brownell
d2876d08d8 gpiolib: add gpio provider infrastructure
Provide new implementation infrastructure that platforms may choose to use
when implementing the GPIO programming interface.  Platforms can update their
GPIO support to use this.  In many cases the incremental cost to access a
non-inlined GPIO should be less than a dozen instructions, with the memory
cost being about a page (total) of extra data and code.  The upside is:

  * Providing two features which were "want to have (but OK to defer)" when
    GPIO interfaces were first discussed in November 2006:

    -	A "struct gpio_chip" to plug in GPIOs that aren't directly supported
	by SOC platforms, but come from FPGAs or other multifunction devices
	using conventional device registers (like UCB-1x00 or SM501 GPIOs,
	and southbridges in PCs with more open specs than usual).

    -	Full support for message-based GPIO expanders, where registers are
	accessed through sleeping I/O calls.  Previous support for these
	"cansleep" calls was just stubs.  (One example: the widely used
	pcf8574 I2C chips, with 8 GPIOs each.)

  * Including a non-stub implementation of the gpio_{request,free}() calls,
    making those calls much more useful.  The diagnostic labels are also
    recorded given DEBUG_FS, so /sys/kernel/debug/gpio can show a snapshot
    of all GPIOs known to this infrastructure.

The driver programming interfaces introduced in 2.6.21 do not change at all;
this infrastructure is entirely below those covers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:12 -08:00
Andrew Morton
795d45b22c x86: fix RTC lockdep warning: potential hardirq recursion
After disabling both CONFIG_DEBUG_LOCKING_API_SELFTESTS and netconsole
(using current mainline) I get a login prompt, and also...

[    5.181668] SELinux: policy loaded with handle_unknown=deny
[    5.183315] type=1403 audit(1202100038.157:3): policy loaded auid=4294967295 ses=4294967295
[    5.822073] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    7.819146] ------------[ cut here ]------------
[    7.819146] WARNING: at kernel/lockdep.c:2033 trace_hardirqs_on+0x9b/0x10d()
[    7.819146] Modules linked in: generic ext3 jbd ide_disk ide_core
[    7.819146] Pid: 399, comm: hwclock Not tainted 2.6.24 #4
[    7.819146]  [<c011d140>] warn_on_slowpath+0x41/0x51
[    7.819146]  [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[    7.819146]  [<c013770c>] ? check_usage_forwards+0x19/0x3b
[    7.819146]  [<c01390c4>] ? __lock_acquire+0xac3/0xb0b
[    7.819146]  [<c0108c98>] ? native_sched_clock+0x8b/0x9f
[    7.819146]  [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[    7.819146]  [<c030ca6c>] ? _spin_unlock_irq+0x22/0x42
[    7.819146]  [<c013848b>] trace_hardirqs_on+0x9b/0x10d
[    7.819146]  [<c030ca6c>] _spin_unlock_irq+0x22/0x42
[    7.819146]  [<c011481e>] hpet_rtc_interrupt+0xdf/0x290
[    7.819146]  [<c014ea90>] handle_IRQ_event+0x1a/0x46
[    7.819146]  [<c014f8ea>] handle_edge_irq+0xbe/0xff
[    7.819146]  [<c0106e08>] do_IRQ+0x6d/0x84
[    7.819146]  [<c0105596>] common_interrupt+0x2e/0x34
[    7.819146]  [<c013007b>] ? ktime_get_ts+0x8/0x3f
[    7.819146]  [<c0139420>] ? lock_release+0x167/0x16f
[    7.819146]  [<c017974a>] ? core_sys_select+0x2c/0x327
[    7.819146]  [<c0179792>] core_sys_select+0x74/0x327
[    7.819146]  [<c0108c98>] ? native_sched_clock+0x8b/0x9f
[    7.819146]  [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[    7.819146]  [<c030ca6c>] ? _spin_unlock_irq+0x22/0x42
[    7.819146]  [<c01384d6>] ? trace_hardirqs_on+0xe6/0x10d
[    7.819146]  [<c030ca77>] ? _spin_unlock_irq+0x2d/0x42
[    7.819146]  [<c023b437>] ? rtc_do_ioctl+0x11b/0x677
[    7.819146]  [<c01c487e>] ? inode_has_perm+0x5e/0x68
[    7.819146]  [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[    7.819146]  [<c0108c98>] ? native_sched_clock+0x8b/0x9f
[    7.819146]  [<c01c490b>] ? file_has_perm+0x83/0x8c
[    7.819146]  [<c023ba08>] ? rtc_ioctl+0xf/0x11
[    7.819146]  [<c017898d>] ? do_ioctl+0x55/0x67
[    7.819146]  [<c0179d15>] sys_select+0x93/0x163
[    7.819146]  [<c0104b39>] ? sysenter_past_esp+0x9a/0xa5
[    7.819146]  [<c0104afe>] sysenter_past_esp+0x5f/0xa5
[    7.819146]  =======================
[    7.819146] ---[ end trace 96540ca301ffb84c ]---
[    7.819210] rtc: lost 6 interrupts
[    7.870668] type=1400 audit(1202128840.794:4): avc:  denied  { audit_write } for  pid=399 comm="hwclock" capability=29 scontext=system_u:system_r:hwclock_t:s0 tcontext=system_u:system_r:hwclock_t:s0 tclass=capability
[    9.538866] input: PC Speaker as /class/input/input5

Because hpet_rtc_interrupt()'s call to get_rtc_time() ends up
resolving to include/asm-generic/rtc.h's (hilariously inlined)
get_rtc_time(), which does spin_unlock_irq() from hard IRQ context.

The obvious patch fixes it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-04 16:48:10 +01:00
H. Peter Anvin
e1adbcf106 asm-generic/tlb.h: remove <linux/quicklist.h>
Remove unused <linux/quicklist.h> from <asm-generic/tlb.h>; per
Christoph Lameter this should have been part of a previous patch
reversal but apparently didn't get removed.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:00 +01:00
Ingo Molnar
62152d0ea7 asm-generic/tlb.h: build fix
bring back the avr32, blackfin, sh, sparc architectures into working order,
by reverting the effects of this change that came in via the x86 tree:

   commit a5a19c63f4
   Author: Jeremy Fitzhardinge <jeremy@goop.org>
   Date:   Wed Jan 30 13:33:39 2008 +0100

       x86: demacro asm-x86/pgalloc_32.h

Sorry about that!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31 22:05:48 +01:00
Arjan van de Ven
edeed30589 x86: add testcases for RODATA and NX protections/attributes
Latest update; I now have 4 NX tests, but 2 fail so they're #if 0'd.
I also cleaned up the NX test code quite a bit, and got rid of the ugly
exception table sorting stuff.

From: Arjan van de Ven <arjan@linux.intel.com>

This patch adds testcases for the CONFIG_DEBUG_RODATA configuration option
as well as the NX CPU feature/mappings. Both testcases can move to tests/
once that patch gets merged into mainline.
(I'm half considering moving the rodata test into mm/init.c but I'll
wait with that until init.c is unified)

As part of this I had to fix a not-quite-right alignment in the vmlinux.lds.h
for the RODATA sections, which lead to 1 page less being marked read only.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:08 +01:00
Jeremy Fitzhardinge
a5a19c63f4 x86: demacro asm-x86/pgalloc_32.h
Convert macros into inline functions, for better type-checking.

This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions.  I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:39 +01:00
Mike Travis
dd5af90a7f x86/non-x86: percpu, node ids, apic ids x86.git fixup
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:32 +01:00
travis@sgi.com
acdac87202 percpu: make the asm-generic/percpu.h more "generic"
- add support for PER_CPU_ATTRIBUTES

- fix generic smp percpu_modcopy to use per_cpu_offset() macro.

Add the ability to use generic/percpu even if the arch needs to override
several aspects of its operations. This will enable the use of generic
percpu.h for all arches.

An arch may define:

__per_cpu_offset	Do not use the generic pointer array. Arch must
			define per_cpu_offset(cpu) (used by x86_64, s390).

__my_cpu_offset		Can be defined to provide an optimized way to determine
			the offset for variables of the currently executing
			processor. Used by ia64, x86_64, x86_32, sparc64, s/390.

SHIFT_PTR(ptr, offset)	If an arch defines it then special handling
			of pointer arithmentic may be implemented. Used
			by s/390.

(Some of these special percpu arch implementations may be later consolidated
so that there are less cases to deal with.)

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:52 +01:00
travis@sgi.com
5280e004fc percpu: move arch XX_PER_CPU_XX definitions into linux/percpu.h
- Special consideration for IA64: Add the ability to specify
  arch specific per cpu flags

- remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case.

The arch definitions are all the same. So move them into linux/percpu.h.

We cannot move DECLARE_PER_CPU since some include files just include
asm/percpu.h to avoid include recursion problems.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:52 +01:00
travis@sgi.com
b32ef636a5 percpu: use a kconfig variable to signal arch specific percpu setup
The use of the __GENERIC_PERCPU is a bit problematic since arches
may want to run their own percpu setup while using the generic
percpu definitions. Replace it through a kconfig variable.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:51 +01:00
Arjan van de Ven
79b4cc5ee7 debug: move WARN_ON() out of line
A quick grep shows that there are currently 1145 instances of WARN_ON
in the kernel. Currently, WARN_ON is pretty much entirely inlined,
which makes it hard to enhance it without growing the size of the kernel
(and getting Andrew unhappy).

This patch build on top of Olof's patch that introduces __WARN,
and places the slowpath out of line. It also uses Ingo's suggestion
to not use __FUNCTION__ but to use kallsyms to do the lookup;
this saves a ton of extra space since gcc doesn't need to store the function
string twice now:

3936367  833603  624736 5394706  525112 vmlinux.before
3917508  833603  624736 5375847  520767 vmlinux-slowpath

15Kb savings...

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Olof Johansson <olof@lixom.net>
Acked-by: Matt Meckall <mpm@selenic.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:50 +01:00
Olof Johansson
3a6a62f96f debug: introduce __WARN()
Introduce __WARN() in the generic case, so the generic WARN_ON()
can use arch-specific code for when the condition is true.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:50 +01:00
Linus Torvalds
5ea293a904 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (79 commits)
  Remove references to "make dep"
  kconfig: document use of HAVE_*
  Introduce new section reference annotations tags: __ref, __refdata, __refconst
  kbuild: warn about ld added unique sections
  kbuild: add verbose option to Section mismatch reporting in modpost
  kconfig: tristate choices with mixed tristate and boolean values
  asm-generic/vmlix.lds.h: simplify __mem{init,exit}* dependencies
  remove __attribute_used__
  kbuild: support ARCH=x86 in buildtar
  kconfig: remove "enable"
  kbuild: simplified warning report in modpost
  kbuild: introduce a few helpers in modpost
  kbuild: use simpler section mismatch warnings in modpost
  kbuild: link vmlinux.o before kallsyms passes
  kbuild: introduce new option to enhance section mismatch analysis
  Use separate sections for __dev/__cpu/__mem code/data
  compiler.h: introduce __section()
  all archs: consolidate init and exit sections in vmlinux.lds.h
  kbuild: check section names consistently in modpost
  kbuild: introduce blacklisting in modpost
  ...
2008-01-29 22:46:14 +11:00
Aneesh Kumar K.V
aa02ad67d9 ext4: Add ext4_find_next_bit()
This function is used by the ext4 multi block allocator patches.

Also add generic_find_next_le_bit

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-01-28 23:58:27 -05:00
Sam Ravnborg
312b1485fb Introduce new section reference annotations tags: __ref, __refdata, __refconst
Today we have the following annotations for functions/data
referencing __init/__exit functions / data:

__init_refok     => for init functions
__initdata_refok => for init data
__exit_refok     => for exit functions

There is really no difference between the __init and __exit
versions and simplify it and to introduce a shorter annotation
the following new annotations are introduced:

__ref      => for functions (code) that
              references __*init / __*exit
__refdata  => for variables
__refconst => for const variables

Whit this annotation is it more obvious what the annotation
is for and there is no longer the arbitary division
between __init and __exit code.

The mechanishm is the same as before - a special section
is created which is made part of the usual sections
in the linker script.

We will start to see annotations like this:

-static struct pci_serial_quirk pci_serial_quirks[] = {
+static const struct pci_serial_quirk pci_serial_quirks[] __refconst = {
-----------------
-static struct notifier_block __cpuinitdata cpuid_class_cpu_notifier =
+static struct notifier_block cpuid_class_cpu_notifier __refdata =
----------------
-static int threshold_cpu_callback(struct notifier_block *nfb,
+static int __ref threshold_cpu_callback(struct notifier_block *nfb,

[The above is just random samples].

Note: No modifications were needed in modpost
to support the new sections due to the newly introduced
blacklisting.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:19 +01:00
Adrian Bunk
1a3fb6d481 asm-generic/vmlix.lds.h: simplify __mem{init,exit}* dependencies
Simplify the dependencies on __mem{init,exit}* (ACPI_HOTPLUG_MEMORY requires
MEMORY_HOTPLUG).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg
eb8f689046 Use separate sections for __dev/__cpu/__mem code/data
Introducing separate sections for __dev* (HOTPLUG),
__cpu* (HOTPLUG_CPU) and __mem* (MEMORY_HOTPLUG)
allows us to do a much more reliable Section mismatch
check in modpost. We are no longer dependent on the actual
configuration of for example HOTPLUG.

This has the effect that all users see much more
Section mismatch warnings than before because they
were almost all hidden when HOTPLUG was enabled.
The advantage of this is that when building a piece
of code then it is much more likely that the Section
mismatch errors are spotted and the warnings will be
felt less random of nature.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>
2008-01-28 23:21:17 +01:00
Sam Ravnborg
01ba2bdc6b all archs: consolidate init and exit sections in vmlinux.lds.h
This patch consolidate all definitions of .init.text, .init.data
and .exit.text, .exit.data section definitions in
the generic vmlinux.lds.h.

This is a preparational patch - alone it does not buy
us much good.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:17 +01:00
Peter Zijlstra
78f2c7db60 sched: SCHED_FIFO/SCHED_RR watchdog timer
Introduce a new rlimit that allows the user to set a runtime timeout on
real-time tasks their slice. Once this limit is exceeded the task will receive
SIGXCPU.

So it measures runtime since the last sleep.

Input and ideas by Thomas Gleixner and Lennart Poettering.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Lennart Poettering <mzxreary@0pointer.de>
CC: Michael Kerrisk <mtk.manpages@googlemail.com>
CC: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:27 +01:00
Christoph Lameter
49eaaa1a6c Revert quicklist need->flush fix
Did not fix the reported issue. Apart from other weirdness this causes a
bad link between the TLB flushing logic and the quicklists. If there is
indeed an issue that an arch needs a tlb flush before free then the arch
code needs to set tlb->need_flush before calling quicklist_free.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-26 22:04:09 -08:00
Christoph Lameter
421d991935 quicklist: Set tlb->need_flush if pages are remaining in quicklist 0
This ensures that the quicklists are drained. Otherwise draining may only
occur when the processor reaches an idle state.

Fixes fatal leakage of pgd_t's on 2.6.22 and later.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Reported-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:17 -08:00
Ingo Molnar
58e1010da3 sched: fix RLIMIT_CPU comment
Devan Lippman noticed that the RLIMIT_CPU comment in resource.h is
incorrect: the field is in seconds, not msecs. We used msecs in
earlier versions of the patch but that got changed.

Found-by: Devan Lippman <devan.lippman@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26 21:21:49 +01:00
Mathieu Desnoyers
8256e47cdc Linux Kernel Markers
The marker activation functions sits in kernel/marker.c.  A hash table is used
to keep track of the registered probes and armed markers, so the markers
within a newly loaded module that should be active can be activated at module
load time.

marker_query has been removed. marker_get_first, marker_get_next and
marker_release should be used as iterators on the markers.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:54 -07:00
Jiri Slaby
d05be13bcc define first set of BIT* macros
define first set of BIT* macros

- move BITOP_MASK and BITOP_WORD from asm-generic/bitops/atomic.h to
  include/linux/bitops.h and rename it to BIT_MASK and BIT_WORD
- move BITS_TO_LONGS and BITS_PER_BYTE to bitops.h too and allow easily
  define another BITS_TO_something (e.g. in event.c) by BITS_TO_TYPE macro
Remaining (and common) BIT macro will be defined after all occurences and
conflicts will be sorted out in the patches.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00
Jiri Slaby
0624517d80 forbid asm/bitops.h direct inclusion
forbid asm/bitops.h direct inclusion

Because of compile errors that may occur after bit changes if asm/bitops.h is
included directly without e.g.  linux/kernel.h which includes linux/bitops.h,
forbid direct inclusion of asm/bitops.h.  Thanks to Adrian Bunk.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:41 -07:00
Nick Piggin
26333576fd bitops: introduce lock ops
Introduce test_and_set_bit_lock / clear_bit_unlock bitops with lock semantics.
Convert all architectures to use the generic implementation.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-By: David Howells <dhowells@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Andi Kleen <ak@muc.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:29 -07:00
Adrian Bunk
cba4fbbff2 remove include/asm-*/ipc.h
All asm/ipc.h files do only #include <asm-generic/ipc.h>.

This patch therefore removes all include/asm-*/ipc.h files and moves the
contents of include/asm-generic/ipc.h to include/linux/ipc.h.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Olaf Hering
4029a9177f unexport asm/shmparam.h
SHMLBA cant possible be used in userspace, see sparc versions of that header.

Do not export asm/shmparam.h during make headers_install_all
This removes another uservisible place of PAGE_SIZE

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
KAMEZAWA Hiroyuki
954ffcb35f flush icache before set_pte() on ia64: flush icache at set_pte
Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte().  This is too late.  This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.

This patch flush icache of a page when
	new pte has exec bit.
	&& new pte has present bit
	&& new pte is user's page.
	&& (old *ptep is not present
            || new pte's pfn is not same to old *ptep's ptn)
	&& new pte's page has no Pg_arch_1 bit.
	   Pg_arch_1 is set when a page is cache consistent.

I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".

pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:59 -07:00
Christoph Lameter
8f6aac419b Generic Virtual Memmap support for SPARSEMEM
SPARSEMEM is a pretty nice framework that unifies quite a bit of code over all
the arches.  It would be great if it could be the default so that we can get
rid of various forms of DISCONTIG and other variations on memory maps.  So far
what has hindered this are the additional lookups that SPARSEMEM introduces
for virt_to_page and page_address.  This goes so far that the code to do this
has to be kept in a separate function and cannot be used inline.

This patch introduces a virtual memmap mode for SPARSEMEM, in which the memmap
is mapped into a virtually contigious area, only the active sections are
physically backed.  This allows virt_to_page page_address and cohorts become
simple shift/add operations.  No page flag fields, no table lookups, nothing
involving memory is required.

The two key operations pfn_to_page and page_to_page become:

   #define __pfn_to_page(pfn)      (vmemmap + (pfn))
   #define __page_to_pfn(page)     ((page) - vmemmap)

By having a virtual mapping for the memmap we allow simple access without
wasting physical memory.  As kernel memory is typically already mapped 1:1
this introduces no additional overhead.  The virtual mapping must be big
enough to allow a struct page to be allocated and mapped for all valid
physical pages.  This vill make a virtual memmap difficult to use on 32 bit
platforms that support 36 address bits.

However, if there is enough virtual space available and the arch already maps
its 1-1 kernel space using TLBs (f.e.  true of IA64 and x86_64) then this
technique makes SPARSEMEM lookups even more efficient than CONFIG_FLATMEM.
FLATMEM needs to read the contents of the mem_map variable to get the start of
the memmap and then add the offset to the required entry.  vmemmap is a
constant to which we can simply add the offset.

This patch has the potential to allow us to make SPARSMEM the default (and
even the only) option for most systems.  It should be optimal on UP, SMP and
NUMA on most platforms.  Then we may even be able to remove the other memory
models: FLATMEM, DISCONTIG etc.

[apw@shadowen.org: config cleanups, resplit code etc]
[kamezawa.hiroyu@jp.fujitsu.com: Fix sparsemem_vmemmap init]
[apw@shadowen.org: vmemmap: remove excess debugging]
[apw@shadowen.org: simplify initialisation code and reduce duplication]
[apw@shadowen.org: pull out the vmemmap code into its own file]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:51 -07:00
Al Viro
23ec23c2d3 fix sparc32 breakage (result of vmlinux.lds.S bug)
In commit 4665079cbb ("[NETNS]: Move some
code into __init section when CONFIG_NET_NS=n") we got a new section -
.exit.text.refok (more of 'let's tell modpost that some bogus calls are
not bogus', a-la text.init.refok).

Unfortunately, the commit in question forgot to add it to TEXT_TEXT,
with rather amusing results.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:58:59 -07:00
Alan Cox
4743d0854f libata-portmap: Remove unused definitions
With the PCI layer properly handling legacy IDE and the kernel now using
it these can go

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:37 -04:00
Paul Mackerras
b0052fcaef Define termios_1 functions for powerpc, s390, avr32 and frv
Commit f629307c85 introduced uses of
kernel_termios_to_user_termios_1 and user_termios_to_kernel_termios_1
on all architectures.  However, powerpc, s390, avr32 and frv don't
currently define those functions since their termios struct didn't
need to be changed when the arbitrary baud rate stuff was added, and
thus the kernel won't currently build on those architectures.

This adds definitions of kernel_termios_to_user_termios_1 and
user_termios_to_kernel_termios_1 to include/asm-generic/termios.h
which are identical to kernel_termios_to_user_termios and
user_termios_to_kernel_termios respectively.  The definitions are the
same because the "old" termios and "new" termios are in fact the same
on these architectures (which are the same ones that use
asm-generic/termios.h).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-12 09:08:05 -07:00
Greg Ungerer
9535239f6b changing include/asm-generic/pgtable.h for non-mmu
There are some parts of include/asm-generic/pgtable.h that are relevant to
the non-mmu architectures.  To make it easier to include this from them I
would like to ifdef the relevant parts.

Without this there is a handful of functions that are referenced in here
that are not defined on many non-mmu architectures.  They could be defined
out of course, as an alternative approach.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:42 -07:00
Linus Torvalds
8d4fbcfbe0 Fix WARN_ON() on bitfield ops
Alexey Dobriyan noticed that the new WARN_ON() semantics that were
introduced by commit 684f978347 (to also
return the value to be warned on) didn't compile when given a bitfield,
because the typeof doesn't work for bitfields.

So instead of the typeof trick, use an "int" variable together with a
"!!(x)" expression, as suggested by Al Viro.

To make matters more interesting, Paul Mackerras points out that that is
sub-optimal on Power, but the old asm-coded comparison seems to be buggy
anyway on 32-bit Power if the conditional was 64-bit, so I think there
are more problems there.

Regardless, the new WARN_ON() semantics may have been a bad idea.  But
this at least avoids the more serious complications.

Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-07-31 21:12:07 -07:00
Mike Frysinger
937472b00b use __val in __get_unaligned
Use "__val" rather than "val" in the __get_unaligned macro in
asm-generic/unaligned.h.  This way gcc wont warn if you happen to also name
something in the same scope "val".

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:42 -07:00
Roland McGrath
cbe87121f1 i386: Put allocated ELF notes in read-only data segment
This changes the i386 linker script and the asm-generic macro it uses so that
ELF note sections with SHF_ALLOC set are linked into the kernel image along
with other read-only data.  The PT_NOTE also points to their location.

This paves the way for putting useful build-time information into ELF notes
that can be found easily later in a kernel memory dump.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:47 -07:00
Fenghua Yu
5fb7dc37dc define new percpu interface for shared data
per cpu data section contains two types of data.  One set which is
exclusively accessed by the local cpu and the other set which is per cpu,
but also shared by remote cpus.  In the current kernel, these two sets are
not clearely separated out.  This can potentially cause the same data
cacheline shared between the two sets of data, which will result in
unnecessary bouncing of the cacheline between cpus.

One way to fix the problem is to cacheline align the remotely accessed per
cpu data, both at the beginning and at the end.  Because of the padding at
both ends, this will likely cause some memory wastage and also the
interface to achieve this is not clean.

This patch:

Moves the remotely accessed per cpu data (which is currently marked
as ____cacheline_aligned_in_smp) into a different section, where all the data
elements are cacheline aligned. And as such, this differentiates the local
only data and remotely accessed data cleanly.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Al Viro
d37c6e1b67 saner typechecking in generic unaligned.h
Verify that types would match for assignment (under sizeof, so we are safe from
side effects or any code actually getting generated), then explicitly cast
everywhere to the fixed-sized types.  Kills a bunch of bogus warnings about
constants being truncated (gcc, sparse), finds a pile of endianness problems
hidden by old noise (sparse).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 11:01:07 -07:00
Alexey Dobriyan
2a41de48b8 Fix sparse false positives re BUG_ON(ptr)
sparse now warns if one compares pointers with integers. However, there are
false positives, like:

	fs/filesystems.c:72:2: warning: Using plain integer as NULL pointer

Every time BUG_ON(ptr) is used, ptr is checked against integer zero.  Avoid
that and save ~70 false positives from allyesconfig run.

mentioned by Al.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Josh Triplett <josh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Martin Schwidefsky
e21ea246bc mm: remove ptep_test_and_clear_dirty and ptep_clear_flush_dirty
Nobody is using ptep_test_and_clear_dirty and ptep_clear_flush_dirty.  Remove
the functions from all architectures.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Martin Schwidefsky
f0e47c229b mm: remove ptep_establish()
The last user of ptep_establish in mm/ is long gone.  Remove the architecture
primitive as well.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Ulrich Drepper
f23513e8d9 Introduce O_CLOEXEC
The problem is as follows: in multi-threaded code (or more correctly: all
code using clone() with CLONE_FILES) we have a race when exec'ing.

   thread #1                       thread #2

   fd=open()

                                   fork + exec

  fcntl(fd,F_SETFD,FD_CLOEXEC)

In some applications this can happen frequently.  Take a web browser.  One
thread opens a file and another thread starts, say, an external PDF viewer.
 The result can even be a security issue if that open file descriptor
refers to a sensitive file and the external program can somehow be tricked
into using that descriptor.

Just adding O_CLOEXEC support to open() doesn't solve the whole set of
problems.  There are other ways to create file descriptors (socket,
epoll_create, Unix domain socket transfer, etc).  These can and should be
addressed separately though.  open() is such an easy case that it makes not
much sense putting the fix off.

The test program:

#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>

#ifndef O_CLOEXEC
# define O_CLOEXEC 02000000
#endif

int
main (int argc, char *argv[])
{
  int fd;
  if (argc > 1)
    {
      fd = atol (argv[1]);
      printf ("child: fd = %d\n", fd);
      if (fcntl (fd, F_GETFD) == 0 || errno != EBADF)
        {
          puts ("file descriptor valid in child");
          return 1;
        }
      return 0;
    }

  fd = open ("/proc/self/exe", O_RDONLY | O_CLOEXEC);
  printf ("in parent: new fd = %d\n", fd);
  char buf[20];
  snprintf (buf, sizeof (buf), "%d", fd);
  execl ("/proc/self/exe", argv[0], buf, NULL);
  puts ("execl failed");
  return 1;
}

[kyle@parisc-linux.org: parisc fix]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Dan Williams
1b0fac4587 dma-mapping: prevent dma dependent code from linking on !HAS_DMA archs
Continuing the work started in 411f0f3edc ...

This enables code with a dma path, that compiles away, to build without
requiring additional code factoring.  It also prevents code that calls
dma_alloc_coherent and dma_free_coherent from linking whereas previously
the code would hit a BUG() at run time.  Finally, it allows archs that set
!HAS_DMA to delete their asm/dma-mapping.h file.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: <geert@linux-m68k.org>
Cc: <zippel@linux-m68k.org>
Cc: <spyro@f2s.com>
Cc: <ysato@users.sourceforge.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Mike Galbraith
ff80a77f20 sched: simplify sched_find_first_bit()
simplify sched_rt.c's sched_find_first_bit() function: there are
only 100 RT priority levels left.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09 18:52:00 +02:00
Benjamin Herrenschmidt
8dab5241d0 Rework ptep_set_access_flags and fix sun4c
Some changes done a while ago to avoid pounding on ptep_set_access_flags and
update_mmu_cache in some race situations break sun4c which requires
update_mmu_cache() to always be called on minor faults.

This patch reworks ptep_set_access_flags() semantics, implementations and
callers so that it's now responsible for returning whether an update is
necessary or not (basically whether the PTE actually changed).  This allow
fixing the sparc implementation to always return 1 on sun4c.

[akpm@linux-foundation.org: fixes, cleanups]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: David Miller <davem@davemloft.net>
Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Acked-by: William Lee Irwin III <wli@holomorphy.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-16 13:16:16 -07:00
Sam Ravnborg
4096b46f01 sparc64: fix alignment bug in linker definition script
The RO_DATA section were hardcoded to a specific
alignment in include/asm-generic/vmlinux.h.
But for sparc64 this did not match the PAGE_SIZE.

Introduce a new section definition named:
RO_DATA that takes actual alignment as parameter.
RODATA are provided for backward compatibility.

On top of this avoid hardcoding alignment for
sparc64 in reset of the script
Fix is build-tested on sparc64 + x86_64.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-29 21:29:00 +02:00
Linus Torvalds
8f53b6fcc4 Don't call a warnign a bug. It's a warning.
Change the default printout message for WARN_ON() to say what it is, not
something else.  I'm tired of having people get all aflutter about a warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-24 10:13:43 -07:00
Sam Ravnborg
0e0d314e6a kbuild: introduce __init_refok/__initdata_refok to supress section mismatch warnings
Throughout the kernel there are a few legitimite references
to init or exit sections. Most of these are covered by the
patterns included in modpost but a few nees special attention.
To avoid hardcoding a lot of function names in modpost introduce
a marker so relevant function/data can be marked.
When modpost see a reference to a init/exit function from
a function/data marked no warning will be issued.

Idea from: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2007-05-19 09:11:58 +02:00
Sam Ravnborg
ca967258b6 all-archs: consolidate .data section definition in asm-generic
With this consolidation we can now modify the .data
section definition in one spot for all archs.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19 09:11:57 +02:00
Sam Ravnborg
7664709b44 all-archs: consolidate .text section definition in asm-generic
Move definition of .text section to asm-generic.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19 09:11:57 +02:00
Linus Torvalds
853da00220 Merge branch 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] Abnormal End of Processes
  [PATCH] match audit name data
  [PATCH] complete message queue auditing
  [PATCH] audit inode for all xattr syscalls
  [PATCH] initialize name osid
  [PATCH] audit signal recipients
  [PATCH] add SIGNAL syscall class (v3)
  [PATCH] auditing ptrace
2007-05-11 09:57:16 -07:00
Stephen Rothwell
04dd08b45b Consolidate asm/poll.h
These files are almost all the same.

This patch could be made even simpler if we don't mind POLLREMOVE turning
up in a few architectures that didn't have it previously (which should be
OK as POLLREMOVE is not used anywhere in the current tree).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:34 -07:00
Amy Griffis
7f13da40e3 [PATCH] add SIGNAL syscall class (v3)
Add a syscall class for sending signals.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-05-11 05:38:25 -04:00
Robert P. J. Day
beb7dd86a1 Fix misspellings collected by members of KJ list.
Fix the misspellings of "propogate", "writting" and (oh, the shame
:-) "kenrel" in the source tree.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 07:14:03 +02:00
Mathieu Desnoyers
5e97b9309b local_t: architecture independent extension
This series extena and standardises local_t operations on each architecture,
allowing a rich set of atomic operations to be done on per-cpu data with
minimal performance impact.  On architectures where there seems to be no
difference between the SMP and UP operation (same memory barriers, same
LOCKing), local.h simply includes asm-generic/local.h, which removes
duplicated code from the current kernel tree.

This patch:

local_t: architecture independent extension

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:20 -07:00
Mathieu Desnoyers
2856f5e31c atomic.h: atomic_add_unless as inline. Remove system.h atomic.h circular dependency
atomic_add_unless as inline. Remove system.h atomic.h circular dependency.
I agree (with Andi Kleen) this typeof is not needed and more error
prone. All the original atomic.h code that uses cmpxchg (which includes
the atomic_add_unless) uses defines instead of inline functions,
probably to circumvent a circular dependency between system.h and
atomic.h on powerpc (which my patch addresses). Therefore, it makes
sense to use inline functions that will provide type checking.

atomic_add_unless as inline. Remove system.h atomic.h circular dependency.
Digging into the FRV architecture shows me that it is also affected by
such a circular dependency. Here is the diff applying this against the
rest of my atomic.h patches.

It applies over the atomic.h standardization patches.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:20 -07:00
Mathieu Desnoyers
bb2382c3e4 atomic.h: complete atomic_long operations in asm-generic
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:19 -07:00
Christoph Hellwig
1eeb66a1bb move die notifier handling to common code
This patch moves the die notifier handling to common code.  Previous
various architectures had exactly the same code for it.  Note that the new
code is compiled unconditionally, this should be understood as an appel to
the other architecture maintainer to implement support for it aswell (aka
sprinkling a notify_die or two in the proper place)

arm had a notifiy_die that did something totally different, I renamed it to
arm_notify_die as part of the patch and made it static to the file it's
declared and used at.  avr32 used to pass slightly less information through
this interface and I brought it into line with the other architectures.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix vmalloc_sync_all bustage]
[bryan.wu@analog.com: fix vmalloc_sync_all in nommu]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-arch@vger.kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:04 -07:00
Jeremy Fitzhardinge
03df4f6ee9 [PATCH] i386: Clean up ELF note generation
Three cleanups:

1: ELF notes are never mapped, so there's no need to have any access
flags in their phdr.

2: When generating them from asm, tell the assembler to use a SHT_NOTE
section type.  There doesn't seem to be a way to do this from C.

3: Use ANSI rather than traditional cpp behaviour to stringify the
macro argument.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
2007-05-02 19:27:17 +02:00
Jeremy Fitzhardinge
d6dd61c831 [PATCH] x86: PARAVIRT: add hooks to intercept mm creation and destruction
Add hooks to allow a paravirt implementation to track the lifetime of
an mm.  Paravirtualization requires three hooks, but only two are
needed in common code.  They are:

arch_dup_mmap, which is called when a new mmap is created at fork

arch_exit_mmap, which is called when the last process reference to an
  mm is dropped, which typically happens on exit and exec.

The third hook is activate_mm, which is called from the arch-specific
activate_mm() macro/function, and so doesn't need stub versions for
other architectures.  It's called when an mm is first used.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: linux-arch@vger.kernel.org
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2007-05-02 19:27:14 +02:00
Rusty Russell
ae1ee11be7 [PATCH] i386: Use per-cpu variables for GDT, PDA
Allocating PDA and GDT at boot is a pain.  Using simple per-cpu variables adds
happiness (although we need the GDT page-aligned for Xen, which we do in a
followup patch).

[akpm@linux-foundation.org: build fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:10 +02:00
Linus Torvalds
15c5403396 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (448 commits)
  [IPV4] nl_fib_lookup: Initialise res.r before fib_res_put(&res)
  [IPV6]: Fix thinko in ipv6_rthdr_rcv() changes.
  [IPV4]: Add multipath cached to feature-removal-schedule.txt
  [WIRELESS] cfg80211: Clarify locking comment.
  [WIRELESS] cfg80211: Fix locking in wiphy_new.
  [WEXT] net_device: Don't include wext bits if not required.
  [WEXT]: Misc code cleanups.
  [WEXT]: Reduce inline abuse.
  [WEXT]: Move EXPORT_SYMBOL statements where they belong.
  [WEXT]: Cleanup early ioctl call path.
  [WEXT]: Remove options.
  [WEXT]: Remove dead debug code.
  [WEXT]: Clean up how wext is called.
  [WEXT]: Move to net/wireless
  [AFS]: Eliminate cmpxchg() usage in vlocation code.
  [RXRPC]: Fix pointers passed to bitops.
  [RXRPC]: Remove bogus atomic_* overrides.
  [AFS]: Fix u64 printing in debug logging.
  [AFS]: Add "directory write" support.
  [AFS]: Implement the CB.InitCallBackState3 operation.
  ...
2007-04-27 09:26:46 -07:00
Martin Schwidefsky
6c210482ae [S390] split page_test_and_clear_dirty.
The page_test_and_clear_dirty primitive really consists of two
operations, page_test_dirty and the page_clear_dirty. The combination
of the two is not an atomic operation, so it makes more sense to have
two separate operations instead of one.
In addition to the improved readability of the s390 version of
SetPageUptodate, it now avoids the page_test_dirty operation which is
an insert-storage-key-extended (iske) instruction which is an expensive
operation.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27 16:01:46 +02:00
Stephen Hemminger
3927f2e8f9 [NET]: div64_64 consolidate (rev3)
Here is the current version of the 64 bit divide common code.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:23:33 -07:00
Zachary Amsden
49f1971051 [PATCH] Proper fix for highmem kmap_atomic functions for VMI for 2.6.21
Since lazy MMU batching mode still allows interrupts to enter, it is
possible for interrupt handlers to try to use kmap_atomic, which fails when
lazy mode is active, since the PTE update to highmem will be delayed.  The
best workaround is to issue an explicit flush in kmap_atomic_functions
case; this is the only way nested PTE updates can happen in the interrupt
handler.

Thanks to Jeremy Fitzhardinge for noting the bug and suggestions on a fix.

This patch gets reverted again when we start 2.6.22 and the bug gets fixed
differently.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-08 19:47:55 -07:00
Linus Torvalds
38f3323037 Revert "[PATCH] LOG2: Alter get_order() so that it can make use of ilog2() on a constant"
This reverts commit 39d61db0ed.

The commit was buggy in multiple ways:
 - the conversion to ilog2() was incorrect to begin with
 - it tested the wrong #defines, so on all architectures but FRV you'd
   never see the bug except for constant arguments.
 - the new "get_order()" macro used its arguments multiple times, and
   didn't even parenthesize them properly
 - despite the comments, it was not true that you could use it for
   constant initializers, since not all architectures even use the
   generic page.h header file.

All of the problems are individually fixable, but it all boils down to:
better just revert it, and re-do it from scratch.

Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06 19:38:01 -08:00
Zachary Amsden
9226d125d9 [PATCH] i386: paravirt CPU hypercall batching mode
The VMI ROM has a mode where hypercalls can be queued and batched.  This turns
out to be a significant win during context switch, but must be done at a
specific point before side effects to CPU state are visible to subsequent
instructions.  This is similar to the MMU batching hooks already provided.
The same hooks could be used by the Xen backend to implement a context switch
multicall.

To explain a bit more about lazy modes in the paravirt patches, basically, the
idea is that only one of lazy CPU or MMU mode can be active at any given time.
 Lazy MMU mode is similar to this lazy CPU mode, and allows for batching of
multiple PTE updates (say, inside a remap loop), but to avoid keeping some
kind of state machine about when to flush cpu or mmu updates, we just allow
one or the other to be active.  Although there is no real reason a more
comprehensive scheme could not be implemented, there is also no demonstrated
need for this extra complexity.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
David Brownell
4c20386c8d [PATCH] GPIO core
This defines a simple and minimalist programming interface for GPIO APIs:

  - Documentation/gpio.txt ... describes things (read it)

  - include/asm-arm/gpio.h ... defines the ARM hook, which just punts
    to <asm/arch/gpio.h> for any implementation

  - include/asm-generic/gpio.h ... implement "can sleep" variants as calling
    the normal ones, for systems that don't handle i2c expanders.

The immediate need for such a cross-architecture API convention is to support
drivers that work the same on AT91 ARM and AVR32 AP7000 chips, which embed many
of the same controllers but have different CPUs.  However, several other users
have been reported, including a driver for a hardware watchdog chip and some
handhelds.org multi-CPU button drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:34 -08:00
Heiko Carstens
509cb37e17 [PATCH] one more iomap s390 build fix
Commit 9ac7849e35 causes this on S390:

  drivers/built-in.o: In function `dmam_noncoherent_release':
    dma-mapping.c:(.text+0x1515c): undefined reference to `dma_free_noncoherent'
  drivers/built-in.o: In function `dmam_free_noncoherent':
    undefined reference to `dma_free_noncoherent'
  drivers/built-in.o: In function `dmam_alloc_noncoherent':
    undefined reference to `dma_alloc_noncoherent'
  make: *** [.tmp_vmlinux1] Error 1

Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 20:06:39 -08:00
Randy Dunlap
f05b6284ee [PATCH] typeof __page_to_pfn with SPARSEMEM=y
With CONFIG_SPARSEMEM=y:

mm/rmap.c:579: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'int'

Make __page_to_pfn() return unsigned long.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:17 -08:00
Robert P. J. Day
e10a4437cb [PATCH] Remove final references to deprecated "MAP_ANON" page protection flag
Remove the last vestiges of the long-deprecated "MAP_ANON" page protection
flag: use "MAP_ANONYMOUS" instead.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:17 -08:00
David Woodhouse
8cdf92a98f Fix Maple PATA IRQ assignment.
On the Maple board, the AMD8111 IDE is in legacy mode... except that it
appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by
the architecture's "pci_get_legacy_ide_irq()" function, but in libata we
just hard-code the numbers 14 and 15.

This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as
appropriate, having added a pci_dev argument to the
ATA_{PRIM,SECOND}ARY_IRQ macros.

There's probably a better way to do this -- especially if we observe
that the _only_ case in which this seemingly-generic
"pci_get_legacy_ide_irq()" function returns anything other than 14 and
15 for primary and secondary respectively is the case of the AMD8111 on
the Maple board -- couldn't we handle that with a special case in the
pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into
native mode during early boot and assign resources properly?

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26 17:27:40 -05:00
Ingo Molnar
52e88f5d4a [PATCH] change WARN_ON back to "BUG: at ..."
WARN_ON() ever triggering is a kernel bug.  Do not try to paper over this
fact by suggesting to the user that this is 'only' a warning, as the
following recent commit does:

  commit 30e25b71e7
  Author: Jeremy Fitzhardinge <jeremy@goop.org>
  Date:   Fri Dec 8 02:36:24 2006 -0800

    [PATCH] Fix generic WARN_ON message

    A warning is a warning, not a BUG.

( it might make sense to rename BUG() to CRASH() and BUG_ON() to
  CRASH_ON(), but that does not change the fact that WARN_ON()
  signals a kernel bug. )

i and others objected to this change during lkml review:

  http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2

still the change slipped upstream - grumble :)

Also, use the standard "BUG: " format to make it easier to grep logs and
to make it easier to google for kernel bugs.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30 10:55:54 -08:00
Alan Cox
1597cacbe3 PCI: Fix multiple problems with VIA hardware
This patch is designed to fix:
- Disk eating corruptor on KT7 after resume from RAM
- VIA IRQ handling
- VIA fixups for bus lockups after resume from RAM

The core of this is to add a table of resume fixups run at resume time.
We need to do this for a variety of boards and features, but particularly
we need to do this to get various critical VIA fixups done on resume.

The second part of the problem is to handle VIA IRQ number rules which
are a bit odd and need special handling for PIC interrupts. Various
patches broke various boxes and while this one may not be perfect
(hopefully it is) it ensures the workaround is applied to the right
devices only.

From: Jean Delvare <khali@linux-fr.org>

Now that PCI quirks are replayed on software resume, we can safely
re-enable the Asus SMBus unhiding quirk even when software suspend support
is enabled.

[akpm@osdl.org: fix const warning]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20 10:54:43 -08:00
Linus Torvalds
d1526e2cda Remove stack unwinder for now
It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed.  We can put it back when
it's stable and isn't likely to make warning or bug events worse.

In the meantime, enable frame pointers for more readable stack traces.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-15 08:47:51 -08:00
Linus Torvalds
8d610dd52d Make sure we populate the initroot filesystem late enough
We should not initialize rootfs before all the core initializers have
run.  So do it as a separate stage just before starting the regular
driver initializers.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-11 12:12:04 -08:00
Alan Cox
606d099cdd [PATCH] tty: switch to ktermios
This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:57 -08:00
David Howells
39d61db0ed [PATCH] LOG2: Alter get_order() so that it can make use of ilog2() on a constant
Alter get_order() so that it can make use of ilog2() on a constant to produce
a constant value, retaining the ability for an arch to override it in the
non-const case.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:51 -08:00
Jeremy Fitzhardinge
30e25b71e7 [PATCH] Fix generic WARN_ON message
A warning is a warning, not a BUG.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:39 -08:00
Jeremy Fitzhardinge
7664c5a1da [PATCH] Generic BUG implementation
This patch adds common handling for kernel BUGs, for use by architectures as
they wish.  The code is derived from arch/powerpc.

The advantages of having common BUG handling are:
 - consistent BUG reporting across architectures
 - shared implementation of out-of-line file/line data
 - implement CONFIG_DEBUG_BUGVERBOSE consistently

This means that in inline impact of BUG is just the illegal instruction
itself, which is an improvement for i386 and x86-64.

A BUG is represented in the instruction stream as an illegal instruction,
which has file/line information associated with it.  This extra information is
stored in the __bug_table section in the ELF file.

When the kernel gets an illegal instruction, it first confirms it might
possibly be from a BUG (ie, in kernel mode, the right illegal instruction).
It then calls report_bug().  This searches __bug_table for a matching
instruction pointer, and if found, prints the corresponding file/line
information.  If report_bug() determines that it wasn't a BUG which caused the
trap, it returns BUG_TRAP_TYPE_NONE.

Some architectures (powerpc) implement WARN using the same mechanism; if the
illegal instruction was the result of a WARN, then report_bug(Q) returns
CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG.

lib/bug.c keeps a list of loaded modules which can be searched for __bug_table
entries.  The architecture must call
module_bug_finalize()/module_bug_cleanup() from its corresponding
module_finalize/cleanup functions.

Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount.
At the very least, filename and line information will not be recorded for each
but, but architectures may decide to store no extra information per BUG at
all.

Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so
architectures will generally have to include an infinite loop (or similar) in
the BUG code, so that gcc knows execution won't continue beyond that point.
gcc does have a __builtin_trap() operator which may be useful to achieve the
same effect, unfortunately it cannot be used to actually implement the BUG
itself, because there's no way to get the instruction's address for use in
generating the __bug_table entry.

[randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors]
[bunk@stusta.de: include/linux/bug.h must always #include <linux/module.h]
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Hugh Dickens <hugh@veritas.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:39 -08:00
Linus Torvalds
4522d58275 Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (156 commits)
  [PATCH] x86-64: Export smp_call_function_single
  [PATCH] i386: Clean up smp_tune_scheduling()
  [PATCH] unwinder: move .eh_frame to RODATA
  [PATCH] unwinder: fully support linker generated .eh_frame_hdr section
  [PATCH] x86-64: don't use set_irq_regs()
  [PATCH] x86-64: check vector in setup_ioapic_dest to verify if need setup_IO_APIC_irq
  [PATCH] x86-64: Make ix86 default to HIGHMEM4G instead of NOHIGHMEM
  [PATCH] i386: replace kmalloc+memset with kzalloc
  [PATCH] x86-64: remove remaining pc98 code
  [PATCH] x86-64: remove unused variable
  [PATCH] x86-64: Fix constraints in atomic_add_return()
  [PATCH] x86-64: fix asm constraints in i386 atomic_add_return
  [PATCH] x86-64: Correct documentation for bzImage protocol v2.05
  [PATCH] x86-64: replace kmalloc+memset with kzalloc in MTRR code
  [PATCH] x86-64: Fix numaq build error
  [PATCH] x86-64: include/asm-x86_64/cpufeature.h isn't a userspace header
  [PATCH] unwinder: Add debugging output to the Dwarf2 unwinder
  [PATCH] x86-64: Clarify error message in GART code
  [PATCH] x86-64: Fix interrupt race in idle callback (3rd try)
  [PATCH] x86-64: Remove unwind stack pointer alignment forcing again
  ...

Fixed conflict in include/linux/uaccess.h manually

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:59:11 -08:00
Adrian Bunk
7d1362c0d0 [PATCH] cleanup asm/setup.h userspace visibility
Make the contents of the userspace asm/setup.h header consistent on all
architectures:

 - export setup.h to userspace on all architectures
 - export only COMMAND_LINE_SIZE to userspace
 - frv: move COMMAND_LINE_SIZE from param.h
 - i386: remove duplicate COMMAND_LINE_SIZE from param.h
 - arm:
   - export ATAGs to userspace
   - change u8/u16/u32 to __u8/__u16/__u32

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:46 -08:00
Adrian Bunk
4b358e2206 [PATCH] cleanup include/asm-generic/atomic.h
cleanup asm-generic/atomic.h

 - no longer a userspace header
 - remove the unneeded #include <asm/types.h>
 - #else/#endif comments

[akpm@osdl.org: fix arm build]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:45 -08:00
Ralf Baechle
d3fa72e455 [PATCH] Pass struct dev pointer to dma_cache_sync()
Pass struct dev pointer to dma_cache_sync()

dma_cache_sync() is ill-designed in that it does not have a struct device
pointer argument which makes proper support for systems that consist of a
mix of coherent and non-coherent DMA devices hard.  Change dma_cache_sync
to take a struct device pointer as first argument and fix all its callers
to pass it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:41 -08:00
Ralf Baechle
f67637ee4b [PATCH] Add struct dev pointer to dma_is_consistent()
dma_is_consistent() is ill-designed in that it does not have a struct
device pointer argument which makes proper support for systems that consist
of a mix of coherent and non-coherent DMA devices hard.  Change
dma_is_consistent to take a struct device pointer as first argument and fix
the sole caller to pass it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:41 -08:00