IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It is a preliminary work for supporting multiple EDP PSR and
DP PanelReplay. And it refactors singleton PSR to Multi Transcoder
supportable PSR.
And this moves and renames the i915_psr structure of drm_i915_private's to
intel_dp's intel_psr structure.
It also causes changes in PSR interrupt handling routine for supporting
multiple transcoders. But it does not change the scenario and timing of
enabling and disabling PSR. And it not support multiple pipes with
a single transcoder PSR case yet.
v2: Fix indentation and add comments
v3: Remove Blank line
v4: Rebased
v5: Rebased and Addressed Anshuman's review comment.
- Move calling of intel_psr_init() to intel_dp_init_connector()
v6: Address Anshuman's review comments
- Remove wrong comments and add comments for a limit of supporting of
a single pipe PSR
v7: Update intel_psr_compute_config() for supporting multiple transcoder
PSR on BDW+
v8: Address Anshuman's review comments
- Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn()
v9: Fix commit message
v10: Rebased
v11: Address Jose's review comment.
- Reorder calling order of intel_psr2_program_trans_man_trk_ctl().
- In order to reduce changes keep the old name for drm_i915_private.
- Change restrictions of multiple instances of PSR.
v12: Address Jose's review comment.
- Change the calling of intel_psr2_program_trans_man_trk_ctl() into
commit_pipe_config().
- Change a checking order of CAN_PSR() and connector_status to original
on i915_psr_sink_status_show().
- Drop unneeded intel_dp_update_pipe() function.
- In order to wait a specific encoder which belong to crtc_state on
intel_psr_wait_for_idle(), add checking of encoder.
- Add an whitespace to comments.
v13: Rebased and Address Jose's review comment.
- Add and use for_each_intel_psr_enabled_encoder() macro.
- In order to use correct frontbuffer_bit for each pipe,
fix intel_psr_invalidate() and intel_psr_flush().
- Remove redundant or unneeded codes.
- Update comments.
v14: Address Jose's review comment
- Add and use for_each_intel_encoder_can_psr() macro and
for_each_intel_encoder_mask_can_psr() macro.
- Add source_support member variable into intel_psr structure.
- Update CAN_PSR() macro that checks source_support.
- Move encoder's PSR availity check to psr_init() from
psr_compute_config().
- Remove redundant or unneeded codes.
v15: Remove wrong mutex lock/unlock of PSR from
intel_psr2_program_trans_man_trk_ctl()
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com
Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.
v6:
* also remove assignment in selftests/ in a later patch (Chris)
v5:
* remove assignment in later patch (Chris)
v3:
* rebased
v2:
* move gt/ and gvt/ changes into separate patches
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de
- As RKL and ADL-S only have 5 planes, primary and 4 sprites and
the cursor plane, let's group the handling together under
HAS_D12_PLANE_MINIMIZATION.
- Also use macro to select pipe irq fault error mask.
BSpec: 49251
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-5-aditya.swarup@intel.com
Add support for async flips on vlv/chv. Unlike all the other
platforms vlv/chv do not use the async flip bit in DSPCNTR and
instead we select between async vs. sync flips based on the
surface address register. The normal DSPSURF generates sync
flips DSPADDR_VLV generates async flips. And as usual the
interrupt bits are different from the other platforms.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Add support for async flips on ivb/hsw. Again no need for any
workarounds and just have to deal with the interrupt bits being
shuffled around a bit.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Add support for async flips on ivb/hsw. Unlike bdw+ we don't need
any workarounds to disable async flips. Apart from that the only
real difference from the bdw implementation is the location of the
flip_done interrupt bits.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Implement async flip support for BDW. The implementation is
similar to the skl+ code. And just like skl/bxt/glk bdw also
needs the disable w/a, thus we need to plumb the desired state
of the async flip all the way down to i9xx_plane_ctl_crtc().
According to the spec we do need to bump the surface alignment
to 256KiB for this. Async flips require an X-tiled buffer so
we don't have to worry about linear.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
ADLS follows ICP/TGP like interrupts.
v2: Use "INTEL_PCH_TYPE(dev_priv) >= PCH_ICP" of hpd_icp (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-4-aditya.swarup@intel.com
To get sensible vblank timestamping behaviour we need to feed
the vmax based timings to the vblank code, otherwise it'll chop
off the scanline counter when it exceeds the minumum vtotal.
Additionally with VRR we have three cases to consider when we
generate the vblank timestamp:
1) we are in vertical active
-> nothing special needs to be done, just return the current
scanout position and the core will calculate the timestamp
corresponding to the past time when the current vertical
active started
2) we are in vertical blank and no push has been sent
-> the hardware will keep extending the vblank presumably
to its maximum length, so we make the timestmap match the
expected time when the max length vblank will end. Since
the timings used for this are now based on vmax nothing
special actually needs to be done
3) we are in vblank and a push has been sent so the vblank is
about to terminate
-> presumably we want the timestmap to accurately reflect
when the vblank will terminate, so we use the sampled
frame timestamp vs. current timestamp to guesstimate
how far along the vblank exit we are, and then we
adjust the reported scanout position accordingly so
that the core will see that the vblank is close to
ending.
v2:
* Fix the else if (use_scanline_Counter) (Manasi)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-17-manasi.d.navare@intel.com
Prepare for more platforms with async flip support by turning
the flip_done interrupt enable/disable into plane vfuncs.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-6-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
accesses, inefficient and disfunctional code. The goal is to remove the
export of irq_to_desc() to prevent these things from creeping up again.
-----BEGIN PGP SIGNATURE-----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=BXv+
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
We now use ilk_hpd_irq_setup for all GMCH platforms that do not have
hotplug. These are early gen3 and gen2 devices that now explode on boot
as they try to access non-existent registers.
Fixes: 794d61a19090 ("drm/i915: re-order if/else ladder for hpd_irq_setup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127145748.29491-1-chris@chris-wilson.co.uk
(cherry picked from commit e5346a1ff38a405c14ce8e595269e9b7dcfbb2e9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With GEN11_HOTPLUG_CTL_LONG_DETECT(), SHOTPLUG_CTL_DDI_HPD_LONG_DETECT()
and ICP_TC_HPD_LONG_DETECT() taking the hpd_pin as their argument
we can remove some duplication in the long_detect() switch statements.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204182309.14213-1-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Driver code has no business with the internals of the irq descriptor.
Aside of that the count is per interrupt line and therefore takes
interrupts from other devices into account which share the interrupt line
and are not handled by the graphics driver.
Replace it with a pmu private count which only counts interrupts which
originate from the graphics card.
To avoid atomics or heuristics of some sort make the counter field
'unsigned long'. That limits the count to 4e9 on 32bit which is a lot and
postprocessing can easily deal with the occasional wraparound.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://lore.kernel.org/r/20201210194043.957046529@linutronix.de
Arguably some of these should use intel_de_read() or intel_de_write(),
however not all. Prioritize I915_READ() and I915_WRITE() removal in
general over migrating to the pedantically correct replacements right
away.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-8-jani.nikula@intel.com
We now use ilk_hpd_irq_setup for all GMCH platforms that do not have
hotplug. These are early gen3 and gen2 devices that now explode on boot
as they try to access non-existent registers.
Fixes: 794d61a19090 ("drm/i915: re-order if/else ladder for hpd_irq_setup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127145748.29491-1-chris@chris-wilson.co.uk
The WA specifies that we need to toggle a SDE chicken bit on and then
off as the final step in preparation for s0ix entry.
Bspec: 33450
Bspec: 8402
However, something is happening after we toggle the bit that causes
the WA to be invalidated. This makes dispcnlunit1_cp_xosc_clkreq
active being already in s0ix state i.e SLP_S0 counter incremented.
Tweaking the Wa_14010685332 by setting the bit on suspend and clearing
it on resume turns down the dispcnlunit1_cp_xosc_clkreq.
B.Spec has Documented this tweaked sequence of WA as an alternative.
Let keep this tweaked WA for Gen11 platforms and keep untweaked WA for
other platforms which never observed this issue.
v2 (MattR):
- Change the comment on the workaround to give PCH names rather than
platform names. Although the bspec is setup to list workarounds by
platform, the hardware team has confirmed that the actual issue being
worked around here is something that was introduced back in the
Cannon Lake PCH and carried forward to subsequent PCH's.
- Extend the untweaked version of the workaround to include PCH_CNP as
well. Note that since PCH_CNP is used to represent CMP, this will
apply on CML and some variants of RKL too.
- Cap the untweaked version of the workaround so that it won't apply to
"fake" PCH's (i.e., DG1). The issue we're working around really is
an issue in the PCH itself, not the South Display, so it shouldn't
apply when there isn't a real PCH.
v3:
- use intel_de_rmw(). [Rodrigo]
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110121700.4338-1-anshuman.gupta@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that hpd/display related calls are split from the rest in
intel_irq_init(), skip all of that in case we don't have display.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-8-lucas.demarchi@intel.com
ibx_irq_pre_postinstall() looks totally pointless. We can just
init both SDEIMR and SDEIER at the same time before enabling the
master interrupt. It's equally racy as the other order due
to doing all of this from the postinstall stage with the interrupt
handler already in place. That is, safe with MSI but racy with
shared legacy interrupts. Fortunately we should have MSI on all ilk+.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-20-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Let's enable the hardware hpd logic only for the ports we
can actually use.
In theory this may save some miniscule amounts of power,
and more importantly it eliminates a lot if platform specific
codepaths since the generic thing can now deal with any
combination of ports being present on each SKU.
v2: Deal with DG1
v3: Deal with DG1 some more
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-18-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
We no longer unmask all HPD irqs, so we can drop the ugly per-platform
HPD IIR masking. IMR will prevent unsupported bits from appearing in
IIR.
v2: Deal with DG1
Include "HOTPLUG" in the mask names (Lucas)
v3: Fix typos in subject
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-17-ville.syrjala@linux.intel.com
No reason that I can see why we should enable the hpd detection logic
already during irq postinstall phase. We don't even do this on all
the platforms. We just need it before we actually enable the hotplug
interrupts in .hpd_irq_setup(), and in fact we already do it there as
well. Let's just eliminate the redundant early setup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-15-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use hpd_pin to parametrize BXT_DE_PORT_HP_DDI() to make it clear
these have nothing to do with DDI ports or PHYs as such. The only
thing that matters is the HPD pin assignment.
v2: Remember the gvt
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-8-ville.syrjala@linux.intel.com
HPD pins are inverted for DG1 platform.
Bspec: 49956
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton A Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021082034.3170478-3-lucas.demarchi@intel.com
DG1 has one more combo phy port, no TC and all irq handling goes through
SDE, like for MCC.
v2: Also change intel_hpd_pin_default() to include DG1 mapping
v3, v4: Rebase on hpd refactor
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021082034.3170478-2-lucas.demarchi@intel.com
As we disable the interrupt during suspend, also reset the irq_mask to
short-circuit subsystems that later try to turn off their interrupt
source.
<4>[ 101.816730] i915 0000:00:02.0: drm_WARN_ON(!intel_irqs_enabled(dev_priv))
<4>[ 101.816853] WARNING: CPU: 3 PID: 4241 at drivers/gpu/drm/i915/i915_irq.c:343 ilk_update_display_irq+0xb3/0x130 [i915]
v2: Reset irq_mask for i8xx_irq_reset as well, and split patch to focus
on only i915->irq_mask
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022114246.28566-1-chris@chris-wilson.co.uk
Let's unmask the PCU event irq _after_ we've set up the
hardware and software to deal with the fallout. We can
also drop the PCU event bit from DEIER except when we
need it for rps.
And on the disable side we replace the hand rolled (and
unlocked) DEIER/IIR/IMR frobbing with ilk_disable_display_irq().
Ocd does require me to reorder it to be symmetric with
the enable path however.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
In case of DSI cmd mode, we get hw vblank counter updated after the TE
comes in, if we try to read the hw vblank counter in te handler we
wouldnt have the udpated vblank counter yet. This will lead to a state
where we would send the vblank event to the user space in the next te,
though the frame update would have completed in the first TE duration
itself. Hence switch to using software timestamp based vblank counter.
v2: Use mode_flags from crtc_state (Ville)
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-6-vandita.kulkarni@intel.com
In case of dual link, we get the TE on slave. So clear the TE on slave
DSI IIR.
If we are operating in TE_GATE mode, after we do a frame update, the
transcoder will send the frame data to the panel, after it receives a
TE. Whereas if we are operating in NO_GATE mode then the transcoder will
immediately send the frame data to the panel. We are not dealing with
the periodic command mode here.
v2: Pass only relevant masked bits to the handler (Jani)
v3: Fix the check for cmd mode in TE handler function.
v4: Use intel_handle_vblank instead of drm_handle_vblank (Jani)
v3: Use static on handler func (Jani)
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-4-vandita.kulkarni@intel.com
Configure TE interrupt as part of the vblank enable call flow.
v2: Hide the private flags check inside configure_te (Jani)
v3: Fix the position of masking de_port_masked for DSI_TE.
v4: Simplify the caller of configure_te (Jani)
v5: Clear IIR, remove the usage of private_flags
v6: including icl_dsi header is not needed
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-3-vandita.kulkarni@intel.com
Add enable/disable flip done functions and the flip done handler
function which handles the flip done interrupt.
Enable the flip done interrupt in IER.
Enable flip done function is called before writing the
surface address register as the write to this register triggers
the flip done interrupt
Flip done handler is used to send the page flip event as soon as the
surface address is written as per the requirement of async flips.
The interrupt is disabled after the event is sent.
v2: -Change function name from icl_* to skl_* (Paulo)
-Move flip handler to this patch (Paulo)
-Remove vblank_put() (Paulo)
-Enable flip done interrupt for gen9+ only (Paulo)
-Enable flip done interrupt in power_well_post_enable hook (Paulo)
-Removed the event check in flip done handler to handle async
flips without pageflip events.
v3: -Move skl_disable_flip_done out of interrupt handler (Paulo)
-Make the pending vblank event NULL in the beginning of
flip_done_handler to remove sporadic WARN_ON that is seen.
v4: -Calculate timestamps using flip done time stamp and current
timestamp for async flips (Ville)
v5: -Fix the sparse warning by making the function 'g4x_get_flip_counter'
static.(Reported-by: kernel test robot <lkp@intel.com>)
-Fix the typo in commit message.
v6: -Revert back to old time stamping code.
-Remove the break while calling skl_enable_flip_done. (Paulo)
v7: -Rebased.
v8: -Rebased.
v9: -Use struct drm_i915_private *i915 in new code. (Ville)
-Use intel_crtc instead of drm_crtc. (Ville)
-Do not mix the flip done and vblank hooks. (Ville)
v10: -Rebased.
Signed-off-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921110210.21182-2-karthik.b.s@intel.com
Introduce intel_hpd_hotplug_irqs() as a partner to
intel_hpd_enabled_irqs(). There's no need to care about the
encoders which we're not exposing, so we can avoid hardcoding
the masks in various places.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
